tennessee spi objective: evaluate a protocol to determine if the engineering design process was...

Tennessee SPI Objective:Evaluate a protocol to determine if the engineering design process was successfully applied.

Notes Science

Check for UnderstandingApply the engineering design process to construct aprototype that meets given specifications.

Essential Question(s)What is the process by which technology productsare designed, tested, and produced?

SPI 0807.T/E.2Engineering Design Process

Instructions for Students1) Make sure you view this presentation in slideshow mode.2) You can find instructions about how to do this by doing a Google search or by searching YouTube.3) After you have it in slideshow mode, press the right-arrow keyboard button to advance through the presentation.4) If you need help, please communicate with your teacher.

…is different from the scientific method, but uses the same tools …includes a design phase, testing phase, and production phase.

EDP is used to develop technology products and/or solutions.

Engineering Design Process (EDP)

(Step 5A)Use/Sell the product

(Step 2A)Pick the best design

(Step 1A)Do research about

this technology

STEP 1: Identify and

Research A Need

STEP 3:Make A Prototype

STEP 2:Develop Possible

Solutions

STEP 4:Test and Evaluate

STEP 5: Modify and Retest

Engineering Design Process (In 5 Steps with sub-steps)

(Step 5A)Use/Sell the product

(Step 2A)Pick the best design

(Step 1A)Do research about this technology

STEP 1: Identify a Need

STEP 3:Make A

Prototype

STEP 2:Develop Possible Solutions

STEP 4:Test and Evaluate

STEP 5: Modify and Retest

EDP: (In list format)

Early Phone Prototype

"Mark 1 Version"(EDP Step 1)

Identify and Research A Need

(EDP Step 2) Develop possible solutions

(EDP Step 3) Build a prototype

Engineering Design Process

Was it a "life or death" need?What need did this technology address?

What are some different features that they could have included in these early phones?

What materials did they use when constructing these early phones?

Engineering Design Process

Early Phone Prototype

"Mark 2 Version"

Early Phone Prototype

"Mark 4 Version"

(EDP Steps 4 and 5) Step 4: Test the prototype

Step 5: Modify the prototype and re-test it

Early Phone Prototype

"Mark 3 Version"

What improvements do you notice in the phones shown below?

Engineering Design Process

(EDP Steps 4 and 5) Step 4: Test the prototype

Step 5: Modify the prototype and re-test itWhat improvements do you notice in the phones shown below?

Phone Prototype"Mark 5 Version"

Phone Prototype"Mark 6 Version"

Phone Prototype"Mark 7 Version"

Engineering Design Process

(EDP Steps 4 and 5) Step 4: Test the prototype

Step 5: Modify the prototype and re-test itWhat improvements do you notice in the phones shown below?

Phone Prototype"Mark 8 Version"

Phone Prototypes"Mark 9 Versions"

EDP in the Movies-From the movie “Ironman”

EDP in the Movies-From the movie “Ironman”

Billionaire genius and weapons designer Tony Stark is captured by terrorists, and they want him to build a super-weapon. Instead he builds an armored exoskeleton to fight them.

1st PrototypeMark 1 Version

3rd PrototypeMark 3 Version

Prototypes are often called mark versions

3rd PrototypeMark 3 Version

2nd PrototypeMark 2 Version

1st PrototypeMark 1 Version

Step 1: Identify a need Why did Tony Stark build the "Iron Man" suit?

Step 1A: Do Research about the technology Did Tony do any research first?

Step 2: Develop Possible Solutions What are some other options he could have built instead?

Step 2A: Pick the best design Do you think the "Iron Man" suit was the best design?

Step 3: Make a prototype Where and how did Tony build his prototype(s)Step 4: Test the prototype Where and how did Tony test his prototype(s)Step 5: Modify and re-test the prototype How did Tony modify his prototype to make it work better?

Step 5A: Use and/or sell the product Did Tony sell his Iron Man armor? How did he use it?

SPI 0807.T/E.2Engineering Design Process