the designers’ wood pictures volume 1ngwood.com/designers volume 1.pdf · 2012. 12. 2. · the...
Post on 17-Sep-2020
2 Views
Preview:
TRANSCRIPT
The Designers’
Wood Pictures
Volume 1
This information was put together by Jose Gonzalez for NG Wood Supplies Inc. in an
effort to help the Design Industry with the wood species that are available in today’s
market.
Below you will find the five most common cuts used to slice wood veneer with the most
common type of matching techniques and a list of the wood species available, if there is
one species you can’t find feel free to call us for more information or to give suggestions
for our next volume at 305-824-3222 or e-mail us at joseg7@ngwood.com.
THE 5 MOST COMMONLY USED METHODS OF SLICING
Rotary Cut – veneer produced by placing the log in a lathe and turning into
a cutting knife. Rotary cut veneer is the only veneer which will allow a full
4x8 sheet without seems (WPF)
Plain Slice (Flat Cut) - Veneer which is sliced parallel to the center of the
log to make flat cut veneer. Flat cut produces a cathedral grain pattern.
Quarter Cut – creates a straight grain appearance by slicing perpendicular
to the annual growth rings. Quarter cut produces straight grain veneer
Rift Cut- is used on the oak species. Oak has medullary ray cells which
radiate from the center of the log like the curved spokes of a bicycle’s wheel.
This cut angles the knife at a slight angle to the medullary rays to minimize
ray flakes.
Half Round Slicing- cutting of an arc roughly parallel to the center of the
log to achieve a flat cut veneer. The cathedrals have a more rounded look
since the grain is formed by the inner most growth rings.
THE 4 MOST COMMONLY USED VENEER
MATCHING TECHNIQUES
Book Matching - Pieces of veneer from a flitch are turned over so that
adjacent leaves are put together as two open pages of a book, creating a
symmetrical pattern. Because of the tight side and loose side of the veneer
showing in the pattern a light dark effect (barber pole effect) can occur. This
effect can be minimized through the use of proper finishing techniques.
Slip Matching - Pieces of veneer from a flitch are slipped out in sequence
with all the same face sides being exposed. It produces a uniform color
because all faces have similar light reflection. This reduces the light dark
effect seen on book matched veneer, but changes the grain pattern
dramatically. The figure will repeat but the grain does not match at joints.
Pleasing Match - Veneer flitch is matched by color similarity not
necessarily grain characteristics.
Random (Mismatch) - Veneer flitch is put together randomly, usually used
for lower grade veneers. It is also used to achieve a plank effect.
TABLE OF CONTENTS / VENEER LIST
Alder_______________________________9, 10, 11
Anigre______________________________12, 13, 14
Ash________________________________15, 16, 17, 18
Beech______________________________19
Birch_______________________________ 20, 21
Bubinga ____________________________22
Butternut____________________________23
Carpathian El m Burl___________________24
Cherry______________________________25
Chestnut Wormy______________________26
Cypress_____________________________27
Ebony______________________________28, 29
Eucalyptus___________________________30
Fir Douglas__________________________31
Hickory_____________________________32
Kewazinga___________________________33
Koa_________________________________34
Lacewood____________________________35, 36
Madrone Burl_________________________37
Mahogany____________________________38, 39, 40
Makore_______________________________41, 42, 43
Maple________________________________44, 45, 46, 47, 48, 49
Maple Wormy__________________________50
Mappa Burl____________________________51
Movingui______________________________53
Movingui Dyed_________________________52
Mozambique___________________________54
Myrtle Burl____________________________55, 56
Oak Burl______________________________57
Oak Red_______________________________66, 67, 57
Oak White_____________________________58, 59, 60, 61, 62
Pearwood______________________________63
Poplar_________________________________65
Pine___________________________________64
Redwood Burl___________________________68
Rosewood______________________________69
Sapele_________________________________70, 71, 72
Spanish Cedar ___________________________73
Sycamore_______________________________74, 75
Teak___________________________________76, 77
Walnut Burl_____________________________78
Walnut_________________________________79, 80
Wenge__________________________________81
Zebrawood_______________________________82
Treefrog Line_____________________________83-103
ALDER FLAT CUT
ALDER QUARTER CUT
ALDER KNOTTY
ANIGRE QUARTER CUT FIDDLE BACK FIGURE
ANIGRE QUARTER CUT HEAVY FIGURE
ANIGRE QUARTER CUT MEDIUM FIGURE
ASH QUARTER CUT BROWN
ASH WHITE FLAT CUT
ASH WHITE QUARTER CUT
ASH OLIVE BURL
BEECH STEAMED QUARTER CUT
BIRCH RED FLAT CUT
BIRCH WHITE
BUBINGA QUARTER CUT
BUTTERNUT FLAT CUT
CARPATHIAN ELM BURL
CHERRY FLAT CUT
CHESTNUT WORMY
CYPRESS FLAT CUT
EBONY MACASSAR QUARTER CUT
EBONY MACASSAR QUARTER CUT MAN MADE
EUCALYPTUS QUARTER CUT FIGURED
FIR DOUGLAS
HICKORY / PECAN
KEWAZINGA
KOA
LACEWOOD QUARTER CUT
LACEWOOD QUARTER CUT
MADRONE BURL
MAHOGANY AFRICAN FLAT CUT
MAHOGANY CROTCH
MAHOGANY HONDURAS FLAT CUT
MAKORE QUARTER CUT BLOCK MOTTLE FIG
MAKORE QUARTER CUT FIDDLE BACK FIGURE
MAKORE QUARTER CUT PLAIN
MAPLE BIRDS EYE HEAVY
MAPLE BURL
MAPLE FLAT CUT
MAPLE FLAT CUT CURLY
MAPLE QUARTER CUT
MAPLE QUARTER CUT WITH TIGER FIGURE
MAPLE WORMY
MAPPA BURL
MOVINGUI DYED QUARTER CUT
MOVINGUI QUARTER CUT FIGURE
MOZAMBIQUE QUARTER CUT FIGURE
MYRTLE BURL
MYRTLE BURL
OAK BURL
OAK WHITE FLAT CUT
OAK WHITE QUARTER CUT
OAK WHITE QUARTER CUT WITH FLAKES
OAK WHITE RIFT
OAK WHITE RIFT CUT MAN MADE
PEARWOOD FLAT CUT
PINE PLAIN FLAT CUT
POPLAR FLAT CUT
RED OAK FLAT CUT
RED OAK RIFT CUT
REDWOOD BURL
ROSEWOOD S.A. FLAT CUT
SAPELE FLAT CUT
SAPELE QUARTER CUT
SAPELE QUARTER CUT FIGURED
SPANISH CEDAR FLAT CUT
SYCAMORE AMERICAN
SYCAMORE ENGLISH QUARTER CUT
TEAK FLAT CUT
TEAK QUARTER CUT
WALNUT BURL
WALNUT FLAT CUT
WALNUT QUARTER CUT
WENGE QUARTER CUT
ZEBRAWOOD QUARTER CUT
TREEFROG LINE
TREEFROG BLONEDE YEW BIRDSEYE 62102
TREEFROG BUBINGA COFFEE BURL 61003
TREEFROG CHERRY BIRDEYE 60602
TREEFROG CHERRY BEESWING 60609
TREEFROG CHERRY OLD FRISSE 60601
TREEFROG EBONY STRAIGHT GRAIN 61104
TREEFROG FRUITWOOD BURL 61403
TREEFROG MACASSAR B & W 62005
TREEFROG MAHOGANY OLD ENGLISH STRAIGHT GRAIN 60304
TREEFROG MAPLE BIRDSEYE 60102
TREEFROG MAPLE FRISSE 60101
TREEFROG MAPLE NEW CROWN 60105
TREEFROG MAPLE STRAIGHT GRAIN 60104
TREEFROG OAK CROWN DECAPE 60210
TREEFROG OAK GREY 62204
TREEFROG OAK STRAIGHT GRAIN BLACK 62304
TREEFROG OAK WHITE STRAIGHT GRAIN 60204
TREEFROG ROSEWOOD CROWN 62505
TREEFROG TEAK STRAIGHT GRAIN 60804
TREEFROG WENGE STRAIGHT GRAIN 60704
TREEFROG ZEBRAWOOD STRAIGHT GRAIN 60904
AFROMOSIA
STOCK LIST
10 MIL VENEER
AFROMOSIA, ALDER, ANIGRE, ASH, BEECH, BIRCH, BUBINGA,
BUTTERNUT, CARPATHIAN ELM BURL, CHERRY, CHESTNUT
WORMY, CYPRESS, EBONY, EUCALYPTUS, FIR DOUGLASS,
HICKORY, KEWAZINGA, KOA, LACEWOOD, MADRONE BURL,
MAHOGANY, MAKORE, MAPLE, MAPLE WORMY, MAPPA BURL,
MOVINGUI, MOVINGUI DYED, MOZAMBIQUE, MYRTLE BURL,
OAK BURL, RED OAK, WHITE OAK, PEARWOOD, POPLAR, WHITE
PINE, REDWOOD BURL, ROSEWOOD, SAPELE, SPANISH CEDAR,
SYCAMORE, TEAK, WALNUT, WALNUT BURL, WENGE,
ZEBRAWOOD
WOOD ON WOOD VENEER
ANIGRE, ASH, CHERRY, MAHOGANY, MAPLE, RED OAK, WHITE
OAK, WALNUT, WENGE MAN MADE
PHENOLIC VENEER
CHERRY, MAHOGANY, MAPLE
AND ANY OTHER SPECIES ON THE 10 MIL LIST CAN BE
ORDERED ON WOOD ON WOOD OR PHENOLIC BACK
LUMBER
CHERRY, CYPRESS, MAHOGANY, MAPLE, POPLAR, RED OAK,
POPLAR, SPANISH CEDAR, TEAK, WALNUT, WENGE
PLYWOOD
ANIGRE 3/4”
ASH 1/4", 1/2", 3/4"
BEECH 1/4", 3/4"
BIRCH 1/4", 1/2", 3/4"
CHERRY 1/4", 1/2", 3/4"
MAHOGANY 1/4", 1/2", 3/4"
MAPLE 1/4", 1/2", 3/4"
RED OAK 1/4", 1/2", 3/4"
WHITE OAK 1/4", 1/2", 3/4"
SAPELE QC 1/4", 1/2", 3/4"
SPANISH CEDAR 1/4", 1/2", 3/4"
TEAK 1/4", 1/2", 3/4"
WALNUT 1/4", 1/2", 3/4"
WENGE 1/4", 3/4"
PRE-FINISHED PLYWOOD
CHERRY 3/4”
MAPLE 1/4", 1/2", 3/4"
BIRCH 1/4", 1/2", 3/4"
WHITE CABINET LINER
5/8” 1 SIDED PLYWOOD
3/4” 1 SIDED & 2 SIDED
DRAWER SLIDES 8 FT LENGTHS
4”, 6”, 8”, 10”
FULL EXTENSION
10”, 12”, 14”, 16”, 18”, 20”, 22”, 24”, 26”
HINGES
110 DEGREES FULL OVER LAY AND HALF OVER LAY WITH
ADJUSTABLE PLATES.
top related