the effects of curvature and thickness of cornea-based structures assessed by finite element...
Post on 06-Jan-2018
219 Views
Preview:
DESCRIPTION
TRANSCRIPT
The effects of curvature and thickness of cornea-based structures assessed by finite element modeling and optical
coherence elastographyZhaolong Han, Jiasong Li, Manmohan Singh, Salavat R. Aglyamov,
Chen Wu, Chih-hao Liu, and Kirill V. Larin
Department of Biomedical Engineering, University of Houston
Outline• Introduction• Methods• Results• Conclusion
Introduction• One approach for extracting the biomechanical properties of
the cornea is by assessing the propagation of an elastic wave by Optical Coherence Elastography (OCE).
• However, the wave models currently used to quantify the biomechanical properties are based on the assumption of a thin plate in half-space, which does not incorporate the effects of the thickness and curvature of the cornea.
• We have performed finite element (FE) simulations combined with OCE experiments in order to understand the influence of the corneal curvature and thickness on the group velocity of an elastic wave.
Methods: OCE setup
OCE set up
J. Li, et al, "Dynamic optical coherence tomography measurements of elastic wave propagation in tissue-mimicking phantoms and mouse cornea in vivo," J Biomed Opt 18(12), (2013).
Methods: cornea-shape samples
Contact lensAlcon Inc., TX, USA;
67% delefilcon A, 33% waterPhantom strip on a water balloon
Methods: FEM models
Four types of cornea-like structures
FEM model
Excitation
Results: radius effect
Both FEM and OCE experiments demonstrate that group velocity decreases as radius of curvature increases.
Results: thickness effect
Both FEM and OCE experiments demonstrate that group velocity increases with thickness.
Results: FEM displacement map
Different FEM simulated displacement contour maps (2D and 3D views) at t=3.2 ms for different cornea-shape under the same Young’s modulus E=60kPa.
Results: FEM displacements
FEM simulated vertical displacement temporal profiles obtained at 0.16 mm, 0.80 mm, 1.44 mm and 2.08 mm away from the central excitation for the four types of structures.
Conclusions• In cornea-shape structure, the group velocity
decreases as the radius of curvature increases, and that the velocity increases as the thickness of the sample increases.
• The curvature and thickness must be considered when improving wave models used for reconstructing the biomechanical properties of the cornea from OCE measurements.
• Combining OCE with FEM is a promising method to quantitatively reconstruct elasticity in cornea.
Thank you!
top related