the rimfire and airgun scope mount specialists ... - bkl · pdf filethe rimfire and airgun...
Post on 07-Mar-2018
224 Views
Preview:
TRANSCRIPT
BKLTECHNOLOGIESthe rimfire and airgun SCOPe mOunt SPeCialiStS
Finish off your latest rimfire or airgun & scope acquisition
with mounts from BKL designed to fit any standard 3/8 inch rimfire or 11mm airgun dovetails.
The strong one piece clamping base allows easy mounting of 1 inch and 30mm rifle or pistol scopes.
Patented Auto-Centering™ technology solves the problems created by varying mounting rail widths. Clamping legs move equally as the clamping screws are tightened keeping the scope centered on the rail.
YOur rimfire & airgun mOunt SPeCialiSt
Oversize mounting rails are no problem, the clamping screws can be switched to spreader holes to evenly push the clamping legs apart and allow the mount base to slide onto the dovetail.
Airgunners and Rimfire shooters can now also benefit from the multitude of Picatinny rail mounted optics and accessories with our Weaver/Picatinny to dovetail adaptor mounts.
BKL mounts are manufactured from aircraft grade aluminum alloy on state of the art machinery in Texas. They can be purchased at your local retailer and online at www.bkltech.com.
BKLTECHNOLOGIES
200 SERIES1” SCOPE
RINGS
100 SERIESDOVETAILRISERS
300 SERIES30MM SCOPE
RINGS
400 SERIES14MM RAIL
RINGS
500 SERIESPICATINNYADAPTORS
600 SERIESBUBBLELEVELSwww.bklteCh.COm
Weaver is a registered trademark of Blount and is used for reference only.Photographs, descriptions and other information are purely indicative. BKL reserves the right to change, modify or discontinue products or features at any time.
right Centering ClamP
mOunt/rail CenterlinemOunting rail
left Centering ClamP
left relief Cut
SCrew axiS
right relief Cut
autO-Centering™ Standard On all SerieS
ClamP SPreading CaPabilitYStandard On all SerieS
ClamP SCrew in SPreader POSitiOn
ClamPing hOleS
frOnt View Side View
100 SerieS dOVetail tO dOVetail riSer mOuntS fOr 3/8” and 11mm dOVetailS
bkl-167S 1” lOng dOVetail tri-mOunt riSer mOunt - matte SilVer bkl-169mb
4” lOng dOVetail tri-mOuntriSer mOunt - matte blaCk
bkl-167mb1” lOng dOVetail tri-mOunt riSer mOunt - matte blaCk
bkl-169S 4” lOng dOVetail tri-mOuntriSer mOunt - matte SilVer
bkl-173S 1-5/8” lOng dOVetail tri-mOunt
riSer mOunt - matte SilVer
bkl-173mb 1-5/8” lOng dOVetail tri-mOunt
riSer mOunt - matte blaCk
bkl-181S 0.6” lOng dOVetail tri-mOunt
riSer mOunt - matte SilVer
bkl-181mb 0.6” lOng dOVetail tri-mOunt
riSer mOunt - matte blaCk
w w w . b k l t e C h . C O mBKLTECHNOLOGIES
right Centering ClamP
SCrew axiS
right relief Cut
200 SerieS 1 inCh ring mOuntS fOr 3/8” and 11mm dOVetailS
bkl-254S4” lOng CantileVer mOunt with
1-5/8” ClamPing lengthmatte SilVer
bkl-257hmb .06” lOng dOVetail ringS
high - matte blaCk
bkl-254hmb 4” lOng CantileVer mOunt with 1-5/8” ClamPing length -high
matte blaCk
bkl-257mb 0.6” lOng dOVetail ringS
matte blaCk
bkl-253S 3” lOng CantileVer mOunt with
1- 5/8” ClamPing lengthmatte SilVer
bkl-257S 0.6” lOng dOVetail ringS
matte SilVer
bkl-254mb4” lOng CantileVer mOunt with
1-5/8” ClamPing lengthmatte blaCk
bkl-254d7mb 4” lOng drOP COmPenSated
CantileVer mOunt with 1-5/8” ClamPing length - matte blaCk
bkl-260S4” lOng unitized dOVetail mOunt
matte SilVer
bkl-260d7mb4” lOng drOP COmPenSated
dOVetail mOunt - matte blaCk
bkl-260mb4” lOng unitized dOVetail mOunt
matte blaCk
bkl-260hmb4” lOng unitized dOVetail mOunt
high - matte blaCk
bkl-253mb 3” lOng CantileVer mOunt with
1- 5/8” ClamPing lengthmatte blaCk
m a d e i n t h e u S a
200 SerieS adJuStableSCOPe mOuntS
1 inCh ring mOuntS fOr 3/8” and 11mm dOVetailS
bkl-261mb4” lOng rimfire unitized
dOVetail mOunt - matte blaCk
bkl-288mb4” lOng adJuStable dOVetail mOunt 1 inCh - matte blaCk
bkl-388mb4” lOng adJuStable dOVetail
mOunt 30mm - matte blaCk
bkl-278S1” lOng dOuble StraP OffSet dOVetail ringS - matte SilVer
bkl-261S4” lOng rimfire unitized
dOVetail mOunt - matte SilVer
bkl-263mb1” lOng dOuble StraP
dOVetail ringS - matte blaCk
bkl-274mb 0.6” lOng OffSet dOVetail ringS
matte blaCk
bkl-278mb1” lOng dOuble StraP OffSet dOVetail ringS - matte blaCk
bkl-263S1” lOng dOuble StraP
dOVetail ringS - matte SilVer
bkl-263hmb1” lOng dOuble StraP dOVetail ringS - high
matte blaCk
bkl-274S 0.6” lOng OffSet dOVetail ringS
matte SilVer
w w w . b k l t e C h . C O mBKLTECHNOLOGIES
the bkl adjustable mount system is a significant improvement over the traditional adjustable scope mounts available on the market today; this design incorporates side rails for mounting additional shooting accessories, a much lower profile than usually achievable in an adjustable mount, 2.5 inches of clamping length with six clamping screws. available in 1 inCh or 30mm.
VertiCal adjustment knob
300 SerieS 30mm ring mOuntS fOr 3/8” and 11mm dOVetailS
bkl-300mb0.6” lOng dOVetail ringS
matte blaCk
bkl-301S1” lOng dOuble StraP
dOVetail ringS - matte SilVer
bkl-300S0.6” lOng dOVetail ringS
matte SilVer
bkl-301mb1” lOng dOuble StraP
dOVetail ringS - matte blaCk
bkl-302mb1” lOng dOuble StraP OffSet dOVetail ringS - matte blaCk
bkl-303S0.6” lOng dOVetail
ringS - lOw - matte SilVer
bkl-354S4” lOng CantileVer mOunt with
1-5/8” ClamPing lengthmatte SilVer
bkl-302S1” lOng dOuble StraP OffSet dOVetail ringS - matte SilVer
bkl-303mb0.6” lOng dOVetail
ringS - lOw - matte blaCk
bkl-354mb4” lOng CantileVer mOunt with
1-5/8” ClamPing lengthmatte blaCk
bkl-360S4” lOng unitized
dOVetail mOunt - matte SilVer
bkl-374mb0.6” lOng OffSet
dOVetail ringS - matte blaCk
bkl-360mb4” lOng unitized
dOVetail mOunt - matte blaCk
bkl-374S0.6” lOng OffSet
dOVetail ringS - matte SilVer
m a d e i n t h e u S a
400 SerieS1 inCh ringS, mOuntS &
adaPtOrS fOr 14mm dOVetailS
500 SerieSdOVetail t0 weaVer/PiCatinnY
adaPtOr mOuntS
600 SerieSSCOPe leVel SYStemS
bkl-460mb4” lOng unitized
dOVetail mOunt - matte blaCk
bkl-463mb1” lOng dOuble StraP
dOVetail ringS - matte blaCk
bkl-456mb1” lOng
weaVer/PiCatinnYadaPtOr-matte blaCk
bkl-466mb1” lOng tri-mOunt
mOunt - matte blaCk
bkl-454mb4” lOng CantileVer mOunt with
1-5/8” ClamPing lengthmatte blaCk
bkl-600mb12 waY fOlding SCOPe leVel
fOr 1” SCOPeSmatte blaCk
bkl-610mb12 waY fOlding SCOPe leVel
fOr 30mm SCOPeSmatte blaCk
bkl-620mbring mOunt leVel
(alSO fitS bkl riSerS and adaPtOrS)matte blaCk
bkl-568mb4” lOng adaPtOr mOunt
matte blaCk
bkl-558mb4” lOng rimfire adaPtOr mOunt
matte blaCk
bkl-566mb1” lOng adaPtOr mOunt
matte blaCk
w w w . b k l t e C h . C O mBKLTECHNOLOGIES
bkl-620 ring mount level attaches easily
bkl-554mb4” lOng CantileVer mOunt with
1-5/8” ClamPing lengthmatte blaCk
P.O. bOx 2478 | fOrt wOrth, tx 76113 | 877.255.2001 | fax 817.451.1613 | www.bklteCh.COm
BKLTECHNOLOGIES
top related