thermoforming chains - unikingcanada.com
Post on 20-Oct-2021
2 Views
Preview:
TRANSCRIPT
Gripper / Sticker Chains
THERMOFORMING CHAINS
UNIKINGCANADA.COM
THERMOFORMING CHAINSGripper Chains
2 | UNITING THE STRONGEST LINKS 514-886-5270 | www.unikingcanada.com
PRODUCT FEATURES
CLAMP DESIGNCLAMP FEATURES
FILM RETENTION
SPRING FORCE
CLAMPMATERIAL
SPRINGMATERIAL
BASE CHAINMATERIAL
CORROSIONRESISTANCE
WEARRESISTANCE
TFK
TF
TFO
VERYHIGH 55 N
85 NHIGH
60 NAVERAGE SS SS
SS
S + NC
SS
S + NC
S + NC
GOOD EXCELLENT
EXCELLENT GOOD
GOOD EXCELLENT
EXCELLENT GOOD
GOOD EXCELLENT
SERIES
K STYLE CLAMP
STANDARD CLAMP
HORIZONTAL CLAMP
SS
SS
SS
SS
SS GOODEXCELLENT
MATERIALS
S + NC
TYPE DESCRIPTION FEATURES
Through hardened carbon steel and electroless nickel plating for good corrosion resistance. Excellent strength and wear resistance.
SS Cr-Ni austenitic stainless steel. AISI 302-304 (Wn 1.4301).Excellent corrosion resistance.AUSTENITIC STAINLESS STEEL
CARBON STEEL + NICKEL PLATED
All chains are available in nickel plated or stainless steel construction, for outstanding corrosion resistance.
Improved clamp design for increased �lm retention and smooth operation.
Supplied in pre-stretched and matched strands for trouble free machine set-up.
Special lubrication applied at factory, FDA H1 approved grease, for higher wear and corrosion resistance.
THERMOFORMING CHAINSGripper Chains
UNITING THE STRONGEST LINKS | 3 514-886-5270 | www.unikingcanada.com
K S T Y L E C L A M P “ T F K S E R I E S”
engagement and scrap release.
126TFKISO 08B-1 : PITCH 1/2 “- 12,70 mm Round Spring
19,8
21,6
12,701/2''
23,3
23,3
15,8755/8''
23,8136TFK
23,3
23,8
15,8755/8''
136TFKQ
(da SS136BTFK)
11,2
8
20
3,2
24,312
,49
3
24,3
912
,43
4
3,5
6
5
6
5
136TFKISO 10B-1 : PITCH 5/8 “ - 15,875 mm
136TFKQ10B-1 : PITCH 5/8 “- 15,875 mm
REGINA REF. BASE CHAIN MATERIAL
SPRING MATERIAL
CLAMP MATERIAL
ROLLER DIAMETERDr
INSIDE WIDTHW
CLAMPINGFORCE
136TFK
136TFKQ
SS136TFK
SS136TFKQ
126TFKmm inches N8,51 ,335
10,16 ,400
10,16 ,400
10,16 ,400
10,16 ,400
mm inches7,75 ,305
9,65 ,380
9,65 ,380
9,65 ,380
9,65 ,380
50
55
5555
55
CHAIN PITCHP
mm inches12,70
15,875
15,875
15,875
15,875
S + NC
S + NC
S + NC
SS
SS
SS
SS
SS
SS
SS
ROUND SS
ROUND SS
HYGIENE SS
ROUND SS
HYGIENE SS
SS126TFK 8,51 ,335 7,75 ,305 5012,70 SS SS ROUND SS
NEW
1/2
1/2
5/8
5/8
5/8
5/8
Hygiene Spring
Round Spring
NEWNEW
THERMOFORMING CHAINSGripper Chains
4 | UNITING THE STRONGEST LINKS 514-886-5270 | www.unikingcanada.com
S TA N D A R D C L A M P “ T F S E R I E S“
H O R I ZO N TA L C L A M P “ T F O S E R I E S”
126TFISO 08 B-1 : PITCH 1/2 “- 12,70 mm
126TFOISO 08 B-1 : PITCH 1/2 “- 12,70 mm
Since the horizontal Film Gripper Chains (TFO series) have a dedicated geometry for right or left assembly side, each ordered quantity has to be split in 50% right and 50% left version.
12,70 1/2
12,70 1/2
12,70 1/2
126 TFO/P003
126 TFO/P004
8,51 ,335
8,51 ,335
8,51 ,335
7,75 ,305
7,75 ,305
7,75 ,305
60
60
60
REGINA REF. BASE CHAIN MATERIAL
SPRING MATERIAL
CLAMP MATERIAL
CHAIN PITCHP
ROLLER DIAMETERDr
CLAMPINGFORCE
mm inches mm inches12,70 1/2 8,51 ,335126TFNC/055
SS126 TF/019 12,70 1/2 8,51 ,335
INSIDE WIDTHW
mm inches7,75 ,305
7,75 ,305
N85
85
SS
SS
SS
SS
S + NC
SS
SS
SS
SS
S + NC
S + NC
SS
SS
SS
SS
12,70 1/2SS126 TFO/000
SS126 TFO/001
8,51 ,335 7,75 ,305 60SSSS SS
REGINA REF.ASSEMBLY
SIDEBASE CHAIN MATERIAL
SPRING MATERIAL
CLAMP MATERIAL
CHAIN PITCHP
ROLLER DIAMETERDr
CLAMPINGFORCE
mm inches mm inches
INSIDE WIDTHW
mm inches N
The standard clamp opens vertically with a slight side movement to follow the cam shape.
left
right
right
left
1/2"12,70
.79"20,2
16 .63"
1/2"12,70
1/2"12,70
1/2"12,70
20,9
.82"
26,8
1.06
"
24,5.96"
21,8.87"
19,1
.75"
5,8.22"
30,91.20"
.31"
8.1
1" 2
,7.79"20
.24"
6
.12" 3
All chainscan be supplied
with a high-quality food-grade
initial lubricant!
Version A Version B Version C
Version D Version FVersion E
With button clamps With clamp F
NEWNEW
THERMOFORMING CHAINSGripper Chains
UNITING THE STRONGEST LINKS | 5 514-886-5270 | www.unikingcanada.com
THERMOFORMING CHAINSGripper Chains
6 | UNITING THE STRONGEST LINKS 514-886-5270 | www.unikingcanada.com
Technical features• Single and duplex chain• • Retention force is dependent on material conveyed and
spring design – di�erent number of coils and wire spring diameters available
• The gripper opens when it runs against a control disc (e.g. sprocket hub), causing it to swivel away outwards
• • Food-grade initial lubrication• Sprocket designs on request
Technical features • Single and duplex chain
• • Retention force is dependent on material conveyed and
spring design – di�erent number of coils and wire spring diameters available
• The gripper opens when it runs against a control disc (e.g. sprocket hub), causing it to swivel away outwards
• Food-grade initial lubrication• Sprocket designs on request
Ref. no. iwis DIN ISO Pitch p (mm)
Ave. foil retention
force (N) F*Spring x y Mat. no. Ref. no. iwis DIN ISO Pitch p
(mm)
Ave. foil retention
force (N) F*x y Mat. no.
Version A Version B
Dimensions x and y are dependent on the springs used. These are maximum values for the opening stroke. A smaller opening stroke will increase life expectancy of the spring. * Reference films were used to determine the average film gripping force (F). Concrete values are dependent on the film used (material, surface, thickness). Deviations are possible.
y
x
y
x F F
1/2 x 5/16“ acc. to ISO 606 1/2 x 5/16“ acc. to ISO 606Gripper with 1 tip, special designs on request Gripper with 2 tips, special designs on request
Higher retention force in comparison with 1-tip grip chain
“1-tip” Grip Chains “2-tip” Grip Chains
THERMOFORMING CHAINSGripper Chains
UNITING THE STRONGEST LINKS | 7 514-886-5270 | www.unikingcanada.com
1/2 x 5/16“ acc. to ISO 606
Technical features• Single chain• Rotationally symmetrical gripper element• Extremely flat button clamp• Retention force is dependent on material conveyed and
spring design – di�erent number of coils and wire spring diameters available
• iwis patent (spring without additional fixing elements)• Does not swivel away outwards when opened• Sprocket designs on request
Technical features• Single and duplex chain• Gripper with flat clamping surface• Retention force is dependent on material conveyed and
spring design – di�erent number of coils and wire spring diameters available
• The gripper opens when it runs against a control disc (e.g. sprocket hub), causing it to swivel away outwards
• Gentle handling of materials• Low transmission forces• Sprocket designs on request
“Flat clamp” Grip Chains “Button clamp” Grip Chains
Ref. no. iwis DIN ISO Pitch p (mm)
Ave. foil retention
force (N) F*Spring x y Mat. no. Ref. no.
iwis DIN ISO Pitch p (mm)
Ave. foil retention
force (N) F*e Mat. no.
Version C Version D
Dimensions x and y are dependent on the springs used. These are maximum values for the opening stroke. A smaller opening stroke will increase life expectancy of the spring. * Reference films were used to determine the average film gripping force (F). Concrete values are dependent on the film used (material, surface, thickness). Deviations are possible.
y
x
e
xF
F
1/2 x 5/16“ or 5/8 x 3/8“ acc. to ISO 606
THERMOFORMING CHAINSGripper Chains
8 | UNITING THE STRONGEST LINKS 514-886-5270 | www.unikingcanada.com
1/2 x 5/16“ acc. to ISO 606
Eine kundenspezifische Gestaltung der Räder ist möglich z. B. Lagersitze, Passfedernuten, Gewinde, spezielle Durchmesser, Oberflächen... Bitte teilen Sie uns Ihre technischen Anforde-rungen und Mengen mit.
Sprockets can be supplied in accordance with customer specifications e.g. bearing seats, keyways, threads, spe-cial diameters, surfaces... Please advise us of the techni-cal specifications and quantities you require.
Customised designs
Technical features• Single and duplex chain• Complete gripper element• Gripper element with a continuous sharp-aged
gripping flange• Retention force is dependent on material conveyed• Clamp and spring made of stainless steel spring steel• Due to a special geometry of sprockets used, the gripper
opens with a slight sideways movement• Food-grade initial lubrication• Sprocket designs on request
Grip chain with clamp FVersion F
y
x F
Dimensions x and y are dependent on the springs used. These are maximum values for the opening stroke. A smaller opening stroke will increase life expectancy of the spring. * Reference films were used to determine the average film gripping force (F). Concrete values are dependent on the film used (material, surface, thickness). Deviations are possible.
Sprocket recommendations• For applications with ½“ grip chains , the recommended
minimum number of teeth on the control sprocket is: • For applications with the recommended
minimum number of teeth on the control sprocket is: • For improved running characteristics, we recommend control
sprockets with a minimum of 19 teeth. • We recommend the use of a ramp for sprockets with fewer
than 20 teeth. A ramp is optional if sprockets have morethan 20 teeth.
• Di�erent spring sizes require di�erent control disc diameters.
Control sprockets for Grip Chain applications
NEW
Version A Version B Version D
Ref. no. iwis DIN ISO Pitch p
(mm)
Average foil retention
force (N) F*Spring x y Mat. no.
Example with Version E
THERMOFORMING CHAINSGripper Chains
UNITING THE STRONGEST LINKS | 9 514-886-5270 | www.unikingcanada.com
TYPE 1
Straight Clamp Design
Heart Clamp Design
TYPE 2
TYPE 3
• Springs available with 50N or 100N resistance• Di�erent shapes of stainless steel grippers available• Delta® Titanium 2 or nickel-plated versions• Pitches of 12.7mm and of 15.875mm
Large range of gripper chains. Please consult us.
THERMOFORMING CHAINSSticker Chains
10 | UNITING THE STRONGEST LINKS 514-886-5270 | www.unikingcanada.com
GUIDEDON CHAIN ROLLERS
GUIDEDON SADDLE
GUIDED ONEXTENDED PIN
GUIDED ON SINGLEOUTBOARD ROLLER
GUIDED ON DOUBLEOUTBOARD ROLLER
STICKER CHAINS ARE USED TO CONVEY PLASTIC FILM IN THERMOFORMING MACHINES
ATTACHMENT SHAPE OPTIONS
STANDARD COINED DEEP LINK ASYMMETRIC CHISEL
Uniking Canada sticker chains are based on ISO 08B-2, 08A-1 and 10A-1 roller chains. Upon customer request, Uniking can custom design sticker chains based on the combination of the guide and attachment shape options reported below.
PRODUCT FEATURES Chains are pre-stretched and matched in pairs.
Precise length tolerance for exact film positioning.
High performance lubrication suitable for high temperature. On request with USDA H1 food approved prelubrication.
Optimized plate hardness for improved wear resistance.
GUIDE OPTIONS
SMOOTH TIP FINISHING FORCLEANER PIERCING ANDREDUCED POWDERING
THERMOFORMING CHAINSSticker Chains
UNITING THE STRONGEST LINKS | 11 514-886-5270 | www.unikingcanada.com
REGINAREF.
ISO REF.
CHAIN PITCH P
ROLLER DIAMETERDR
INSIDE WIDTHW
SPIKE ATTACHMENT
TYPE
SPIKE ATTACHMENTFREQUENCYmm inches mm inches mm inches
226/903 12,70 1/2 8,51 0,335 7,75 0,305 150 every 2nd pitch
226SR/P001 12,70 1/2 8,51 0,335 7,75 0,305 1140 every 2nd pitch
GUIDED ON CHAIN ROLLER - COINED AND DEEP LINK
ATTACHMENT TYPE 150
ATTACHMENT TYPE 1140
ATTACHMENT TYPE 1010
ATTACHMENT TYPE 150 ILLIG /TFT/WM style
BELLAPLAST style
OMV style
GUIDED ON CHAIN ROLLER - COINED
REGINAREF.
ISO REF.
CHAIN PITCH P
ROLLER DIAMETERDR
INSIDE WIDTHW
SPIKE ATTACHMENT
TYPE
SPIKE ATTACHMENTFREQUENCYmm inches mm inches mm inches
226/146 12,70 1/2 8,51 0,335 7,75 0,305 150 every 2nd pitch
REGINAREF.
ISO REF.
CHAIN PITCH P
ROLLER DIAMETERDR
INSIDE WIDTHW
SPIKE ATTACHMENT
TYPE
SPIKE ATTACHMENTFREQUENCYmm inches mm inches mm inches
226/090 12,70 1/2 8,51 0,335 7,75 0,305 1010 every 2nd pitch
GUIDED ON SADDLE - COINED
08B-2 BASE CHAIN
THERMOFORMING CHAINSSticker Chains
12 | UNITING THE STRONGEST LINKS 514-886-5270 | www.unikingcanada.com
ATTACHMENT TYPE 150
ATTACHMENT TYPE 150
KIEFEL/ GABLER style
GUIDED ON SINGLE OUTBOARD ROLLER - COINED
GUIDED ON DOUBLE OUTBOARD ROLLER - COINED
REGINAREF.
ISO REF.
CHAIN PITCH P
ROLLER DIAMETERDR
INSIDE WIDTHW
SPIKE ATTACHMENT
TYPE
SPIKE ATTACHMENTFREQUENCYmm inches mm inches mm inches
226/09F 12,70 1/2 8,51 0,335 7,75 0,305 150 every 2nd pitch
REGINAREF.
ISO REF.
CHAIN PITCH P
ROLLER DIAMETERDR
INSIDE WIDTHW
SPIKE ATTACHMENT
TYPE
SPIKE ATTACHMENTFREQUENCYmm inches mm inches mm inches
226SR/009 12,70 1/2 8,51 0,335 7,75 0,305 150 every 2nd pitch
08B-2 BASE CHAIN
08A-1 / A40 BASE CHAIN
ATTACHMENT TYPE 167
GUIDED ON EXTENDED PIN - ASYMMETRIC
REGINAREF.
ISO REF.
CHAIN PITCH P
ROLLER DIAMETERDR
INSIDE WIDTHW
SPIKE ATTACHMENT
TYPE
SPIKE ATTACHMENTFREQUENCY
ASSEMBLYSIDE
mm inches mm inches mm inches
A40/0BB 08A 12,70 1/2 7,92 0,312 7,85 0,309 167 every 2nd pitch right
A40/0BD 08A 12,70 1/2 7,92 0,312 7,85 0,309 167 every 2nd pitch left
A40/11C 08A 12,70 1/2 7,92 0,312 7,85 0,309 167 every 4th pitch right
A40/11D 08A 12,70 1/2 7,92 0,312 7,85 0,309 167 every 4th pitch left
STICKER ATTACHMENT EVERY 2ND PITCH
STICKER ATTACHMENT EVERY 4TH PITCH
IRWINstyle
THERMOFORMING CHAINSSticker Chains
UNITING THE STRONGEST LINKS | 13 514-886-5270 | www.unikingcanada.com
08A-1 / A40 BASE CHAIN
ATTACHMENT TYPE 177
ATTACHMENT TYPE 163
ATTACHMENT TYPE 141
REGINAREF.
ISO REF.
CHAIN PITCH P
ROLLER DIAMETERDR
INSIDE WIDTHW
SPIKE ATTACHMENT
TYPE
SPIKE ATTACHMENTFREQUENCY
ASSEMBLYSIDE
mm inches mm inches mm inches
A40/P004 08A 12,70 1/2 7,92 0,312 7,85 0,309 177 every 2nd pitch left
A40/P003 08A 12,70 1/2 7,92 0,312 7,85 0,309 177 every 2nd pitch right
REGINAREF.
ISO REF.
CHAIN PITCH P
ROLLER DIAMETERDR
INSIDE WIDTHW
SPIKE ATTACHMENT
TYPE
SPIKE ATTACHMENTFREQUENCY
ASSEMBLYSIDE
mm inches mm inches mm inches
A40/0B5 08A 12,70 1/2 7,92 0,312 7,85 0,309 163 every 2nd pitch left
A40/0B7 08A 12,70 1/2 7,92 0,312 7,85 0,309 163 every 2nd pitch right
REGINAREF.
ISO REF.
CHAIN PITCH P
ROLLER DIAMETERDR
INSIDE WIDTHW
SPIKE ATTACHMENT
TYPE
SPIKE ATTACHMENTFREQUENCYmm inches mm inches mm inches
A40/0B9 08A 12,70 1/2 7,92 0,312 7,85 0,309 141 every 2nd pitch
IRWINstyle
IRWINstyle
DINIEPERstyle
THERMOFORMING CHAINSSticker Chains
14 | UNITING THE STRONGEST LINKS 514-886-5270 | www.unikingcanada.com
10A-1 / A50 BASE CHAIN
GUIDED ON EXTENDED PIN - COINED
BROWNstyle
REGINAREF.
ISO REF.
CHAIN PITCH P
ROLLER DIAMETERDR
INSIDE WIDTHW
SPIKE ATTACHMENT
TYPE
SPIKE ATTACHMENTFREQUENCY
ASSEMBLYSIDE
mm inches mm inches mm inches
A50SR/P001 15,875 5/8 10,16 0,400 9,65 0,380 177 every 2nd pitch right
A50SR/P002 15,875 5/8 10,16 0,400 9,65 0,380 177 every 2nd pitch left
A50/P008 15,875 5/8 10,16 0,400 9,65 0,380 177 every 4th pitch right
A50/P009 15,875 5/8 10,16 0,400 9,65 0,380 177 every 4th pitch left
REGINAREF.
ISO REF.
CHAIN PITCH P
ROLLER DIAMETERDR
INSIDE WIDTHW
SPIKE ATTACHMENT
TYPE
SPIKE ATTACHMENTFREQUENCYmm inches mm inches mm inches
A50/P005 15,875 5/8 10,16 0,400 9,65 0,380 190 every 2nd link
ATTACHMENT TYPE 177
GUIDED ON SADDLE - COINED
REGINAREF.
ISO REF.
CHAIN PITCH P
ROLLER DIAMETERDR
INSIDE WIDTHW
SPIKE ATTACHMENT
TYPE
SPIKE ATTACHMENTFREQUENCYmm inches mm inches mm inches
A50/1FF 15,875 5/8 10,16 0,400 9,65 0,380 190 every 2nd link
ATTACHMENT TYPE 190
ATTACHMENT TYPE 190
STICKER ATTACHMENT EVERY 2ND PITCH
STICKER ATTACHMENT EVERY 4TH PITCH
GUIDED ON SADDLE - STANDARD
THERMOFORMING CHAINSSticker Chains
UNITING THE STRONGEST LINKS | 15 514-886-5270 | www.unikingcanada.com
Gabler® is a registered trademark of Gabler Thermoform GmbH Irwin® is a registered trademark of Irwin Reasearch and Development Inc Dinieper® is a registered trademark of Dinieper Ind. Metalurgica Brown® is a registered trademark of Brown Machine LLC
ILLIG® is a registered trademark of ILLIG Machinenbaum GmbH TFT® is a registered trademark of WM Wrapping Machinery SA OMV® is a registered trademark of OMV Machinery Srl Kiefel® is a registered trademark of Kiefel GmbH
THERMOFORMING CHAINSCam Sprockets
16 | UNITING THE STRONGEST LINKS 514-886-5270 | www.unikingcanada.com
THERMOFORMING CHAINSCam Sprockets
UNITING THE STRONGEST LINKS | 17 514-886-5270 | www.unikingcanada.com
info@unikingcanada.comwww.unikingcanada.comPhone : 514-886-5270Fax : 450-430-1950
Tel: 780-242-0864Calgary
Tel: 306-491-1717Yorkton
Tel: 431-334-8334Winnipeg
Tel: 514-886-5270Montreal
Tel: 418-552-0175Quebec City
Tel: 416-526-0352Toronto
PITC
H 3
8.1
MM
/1.5
0 IN
PITC
H 3
8.1
MM
/1.5
0 IN
th are made to order.
PITC
H 3
8.1
MM
/1.5
0 IN
K350 88.9 3.50 3.01 2.02
K400 101.6 4.00 3.26 2.19
* Chains with special hardened pin (HP) for additional wear resistance and higher corrosion strength are made to order.
PITC
H 3
8.1
MM
/1.5
0 INferritic
Stainless Steel) Stainless Steel)
K175 44.5 1.75 1.30 0.87
* Chains with special hardened pin (HP) for additional wear resistance and higher corrosion strength are made to order.
ferritic Stainless Steel)
Stainless Steel)
K750 190.5 7.50 610 24.02 5.50 3.70
* Chains with special hardened pin (HP) for additional wear resistance and higher corrosion strength are made to order.
* Chains with special hardened pin (HP) for additional wear resistan
mm in mm in kg/m lb/ft
K750 190.0 7.50 750 29.53 5.03 3.38
Toronto
Montréal
QuébecCity
Calgary
Winnipeg
Yorkton
top related