thermoplastics andporcelain · 2016. 5. 7. · type: 12812 ref. no.: 108373 with steel thread ref....
Post on 14-Jun-2021
1 Views
Preview:
TRANSCRIPT
THE RIGHT MATERIAL MIXSPELLS A DECISIVE ADVANTAGEThe lampholders presented in this chapter are designed for high-pressuredischarge lamps, for which high ignition voltages and high startingcurrents are characteristic. High temperatures can also occur with higherlamp outputs.
Vossloh-Schwabe therefore attaches great importance to ensuringcasings, contacts and cables are made of high-grade materials.
Owing to the high ignition voltages, these lampholders are alsogoverned by stricter requirements regarding creepage and airclearance distances.
When operating high-pressure discharge lamps with E27 and E40 Edisonbases, care must be taken to ensure that the respective lampholders areapproved for use with discharge lamps. Lampholders that are suitable inthis respect are marked with "5 kV".
Lampholders with E26 and E39 bases and UL-approved wiring can befound under www.unvlt.com.
Lampholders for Discharge Lamps
64
THERMOPLASTICSAND PORCELAIN
E27 lampholders 66–68
E40 lampholders 69–70
G8.5 lampholders 71
GX8.5 lampholders, accessories 71
GU6.5 lampholders 72
PGJ5 lampholders 73
GX10 lampholders 74
GY9.5 lampholders 75
G12, GX12-1, PG12-1, PG12-2 lampholders 75–76
RX7s lampholders 77–80
Fc2 lampholders 80–81
K12x30s lampholders 82
K12s-7 support 82
Technical details for discharge lamps 83–123General technical details 366–474Glossary 375–377
2 Lampholders for Discharge Lamps
10
9
8
7
6
5
4
3
2
1
65
E27 LampholdersFor discharge lamps with base E27
E27 lampholders, for cover caps (see p. 310–312)Profiled shape, external thread 40x2.5 IEC 60399Nominal rating: 4/250/5 kVPush-in twin terminals: 0.5–2.5 mm²Fixing holes for screws M3Rear fixing holes for self-tapping screwsacc. to ISO 1481/7049-ST3.9-C/FWeight: 15/16.5 g, unit: 500 pcs.Type: 64719Ref. No.: 505721 PET GF, black, T210Ref. No.: 505720 LCP, black, T270
E27 lampholders, for cover caps (see p. 310–312)Profiled shape, plainNominal rating: 4/250/5 kVPush-in twin terminals: 0.5–2.5 mm²Fixing holes for screws M3Rear fixing holes for self-tapping screwsacc. to ISO 1481/7049-ST3.9-C/FWeight: 15 g, unit: 500 pcs.Type: 64770Ref. No.: 505389 PET GF, black, T210Ref. No.: 505014 LCP, black, T270
E27 lampholdersCasing: PPS, black, T230Nominal rating: 4/500/5 kVScrew terminals: 0.5–2.5 mm²Spring loaded central contactFixing holes for screws M4 and M5Weight: 35/35.4 g, unit: 250 pcs.Type: 62150Ref. No.: 108718Type: 62151 with lamp safety catchRef. No.: 108719
E27 lampholdersCasing: porcelain, white, T210Nominal rating: 4/250/5 kVScrew terminals: 0.5–2.5 mm²Spring loaded central contactOblong holes for screws M4Weight: 65/67.7 g, unit: 200 pcs.Type: 62600Ref. No.: 102635Type: 62601 with lamp safety catchRef. No.: 102637
Lampholders for Discharge Lamps
66
46
,8
43
,8
1,2
37,5ø
31,5
18
28,6ø
7
1
40ø x2,5
15
8,4 8,4
4
10
,3
8
1
17
26,8
38,2ø
10
,3
46
4,9
41
,9
24
18
E27 lampholderCasing: porcelain, white, T210Nominal rating: 4/250/5 kVScrew terminals: 0.5–2.5 mm²Spring loaded central contactThreaded bushes for screws M3Weight: 69.3 g, unit: 200 pcs.Type: 62622Ref. No.: 108416
E27 lampholdersCasing: porcelain, white, T210Nominal rating: 4/250/5 kVScrew terminals: 0.5–2.5 mm²Spring loaded central contactOblong holes for screws M4, length max. 15 mmWeight: 106.8/103.9 g, unit: 100 pcs.Type: 62104Ref. No.: 102615Type: 62105 with lamp safety catchRef. No.: 102617
E27 lampholdersCasing: porcelain, white, T210Nominal rating: 4/250/5 kVScrew terminals: 0.5–2.5 mm²Spring loaded central contactFixing bracket with slot for screws M5Weight: 113 g, unit: 100 pcs.Type: 62110Ref. No.: 106585Type: 62111 with lamp safety catchRef. No.: 109568
E27 lampholdersCasing: porcelain, white, T270Nominal rating: 4/250/5 kVScrew terminals: 0.5–2.5 mm²Spring loaded central contactFixing oblong holes for screws M4Weight: 60.6 g, unit: 200 pcs.Type: 62050Ref. No.: 102599Type: 62010 with lamp safety catch (with spring)Ref. No.: 102577Type: 62009 with lamp safety catch (with crushing)Ref. No.: 544605
E27 lampholderCasing: porcelain, white, T270Nominal rating: 4/250/5 kVScrew terminals: 0.5–2.5 mm²Spring loaded central contactFastening bushes for screws M3Weight: 66.3 g, unit: 200 pcs.Type: 62015Ref. No.: 102582
Lampholders for Discharge Lamps
67
10
9
8
7
6
5
4
3
2
1
E27 lampholder, one-pieceMaterial: porcelain, white, T270Nominal rating: 4/250/5 kVScrew terminals: 0.5–2.5 mm²Spring loaded central contactFixing oblong holes for screws M4Weight: 60.5 g, unit: 200 pcs.Type: 62070Ref. No.: 543304
E27 lampholderMaterial: porcelain, white, T270Nominal rating: 4/250/5 kVScrew terminals: 0.5–2.5 mm²With lateral fixing flange,tilt angle: 15°Spring loaded central contactFixing hole for screw M4Weight: 67.6 g, unit: 200 pcs.Type: 62415Ref. No.: 543414
E27 lampholder, for cover caps (see page 310–312)Casing: porcelain, white, T270Nominal rating: 4/250/5 kVScrew terminals: 0.5–2.5 mm²Spring loaded central contactFixing oblong holes for screws M4Weight: 66.5 g, unit: 150 pcs.Type: 62310Ref. No.: 102624
E27 lampholderFor cover caps type 80010, 97735and 97742 (see page 318)Casing: porcelain, white, T270Nominal rating: 4/250/5 kVScrew terminals: 0.5–2.5 mm²Spring loaded central contactFixing oblong holes for screw M4Weight: 66.5 g, unit: 200 pcs.Type: 62370Ref. No.: 543303
Lampholders for Discharge Lamps
68
E40 LampholdersFor discharge lamps with base E40
Nominal rating: 18/500/5 kVScrew terminals: 1.5–4 mm²Spring loaded central contact
E40 lampholdersCasing: PPS, black, T240Oblong holes for screws M5Weight: 111.7/112.1 g, unit: 40 pcs.Type: 12600/12601Ref. No.: 400913Ref. No.: 400914 with lamp safety catchWith steel threadRef. No.: 533428Ref. No.: 533429 with lamp safety catch
E40 lampholdersCasing: PPS, black, T240Fixing bracket with slots for screws M5Weight: 122.3/122.7 g, unit: 40 pcs.Type: 12610/12611Ref. No.: 400915Ref. No.: 400916 with lamp safety catchWith steel threadRef. No.: 533430Ref. No.: 533431 with lamp safety catch
E40 lampholdersCasing: PPS, black, T240Fixing bracket with tapped fixing holes M5Weight: 122.9/123.3 g, unit: 40 pcs.Type: 12614/12612Ref. No.: 400917Ref. No.: 400918 with lamp safety catchWith steel threadRef. No.: 536220Ref. No.: 533432 with lamp safety catch
E40 lampholdersCasing: porcelain, white, T270Oblong holes for screws M5Weight: 224/229.3 g, unit : 48 pcs.Type: 12800/12801Ref. No.: 108208Ref. No.: 107780 with lamp safety catchWith steel threadRef. No.: 532602Ref. No.: 532603 with lamp safety catch
Lampholders for Discharge Lamps
69
10
9
8
7
6
5
4
3
2
1
E40 lampholdersCasing: porcelain, white, T270Fixing bracket with slots for screws M5Weight: 252.3/243 g, unit : 48 pcs.Type: 12810/12811Ref. No.: 108374Ref. No.: 108375 with lamp safety catchWith steel threadRef. No.: 532604Ref. No.: 532605 with lamp safety catch
E40 lampholdersCasing: porcelain, white, T270Fixing bracket with tapped fixing holes M5With lamp safety catchWeight: 252.8 g, unit: 48 pcs.Type: 12812Ref. No.: 108373With steel threadRef. No.: 532606
E40 lampholdersOnly for lamps with base E40/E45Casing: porcelain, white, T270Oblong holes for screws M5Weight: 206 g, unit: 50 pcs.Type: 12900/12901Ref. No.: 528252Ref. No.: 528958 with lamp safety catch
E40 lampholdersOnly for lamps with base E40/E45Casing: porcelain, white, T270Fixing bracket with slots for screws M5Weight: 217 g, unit: 50 pcs.Type: 12910/12911Ref. No.: 528253Ref. No.: 528254 with lamp safety catch
Lampholders for Discharge Lamps
70
G8.5 LampholdersFor discharge lamps with base G8.5
Nominal rating: 2/500/5 kVMultipoint contacts: CuNiZnFixing holes for screws M3
G8.5 lampholdersPush-in terminals for stranded conductorswith ferrule bare end of cores Ø 1.4–1.8 mmType: 33600 casing: LCP, black, T260Weight: 5 g, unit: 1000 pcs.Ref. No.: 502394Type: 33650 casing: ceramic, T300Weight: 12.6 g, unit: 150 pcs.Ref. No.: 554542
G8.5 lampholderCasing: ceramic, T300Welded leads: Cu tinned, stranded conductors 1 mm²,
Si-insulation max. Ø 3.6 mm, length: 300 mmWeight: 26.4 g, unit: 100 pcs.Type: 33671Ref. No.: 554543
GX8.5 Lampholders, AccessoriesFor discharge lamps with base GX8.5
GX8.5 lampholdersCasing: LCP, cover material: LCP, T260Nominal rating: 2/500/5kVPush-in terminals for stranded conductorswith ferrule bare end of cores Ø 1.8 mmWeight: 11.9/12.6, unit: 50 pcs.Type: 34650/34651Ref. No.: 547807 fixing holes for screws M3Ref. No.: 547808 threaded bushes M3
Cover cap for GX8.5 lampholders type 346For luminaires of protection class IIMaterial: LCP, blackWeight: 5.4 g, unit: 50 pcs.Type: 97685Ref. No.: 532521
Lampholders for Discharge Lamps
71
10
9
8
7
6
5
4
3
2
1
GU6.5 LampholdersFor discharge lamps with base GU6.5
Suitable for luminaries of protection class IICasing: ceramic, cover: PPS, T250Nominal rating: 2/250/5 kVLeads: Cu nickel-plated, stranded conductors 0.75 mm²,
double PTFE-insulation, length: 250 mm
GU6.5 lampholdersWeight: 13.8 g, unit: 100 pcs.Type: 34510 fixing holes for screws M3Ref. No.: 533957Type: 34511 threaded bushes for screws M3Ref. No.: 534220
GU6.5 lampholderFixing holes for screws M3Identical mounting hole layout and lamp focusof the PGJ5 lampholder 34120 offer an effortlessinterchangeability of both lamp technologies.Weight: 15 g, unit: 100 pcs.Type: 34520Ref. No.: 539497
Lampholders for Discharge Lamps
72
PGJ5 LampholdersFor discharge lamps with base PGJ5
Nominal rating: 2/300/2.5 kVFixing holes for screws M3
PGJ5 lampholders with cover plateCasing: ceramic, cover plate: LCP, T270Leads: Cu nickel-pIated, stranded conductors
0.75 mm², PTFE-insulation, length: 250 mmWeight: 9.2 g, unit: 100 pcs.Type: 34105/34106Ref. No.: 534080 lateral lead exitRef. No.: 534081 central lead exit
PGJ5 lampholders with cover plateSuitable for luminaires protection class IICasing: ceramic, cover plate: LCP, T270Leads: Cu nickel-pIated, stranded conductors
0.75 mm², double PTFE-insulation, length: 250 mmWeight: 10.6 g, unit: 100 pcs.Type: 34110/34111Ref. No.: 534016 lateral lead exitRef. No.: 534017 central lead exit
PGJ5 lampholders with cover plateSuitable for luminaires protection class IICasing: ceramic, cover plate: mica, T270Leads: Cu nickel-pIated, stranded conductors
0.75 mm², double PTFE-insulation, length: 250 mmWeight: 10.8 g, unit: 100 pcs.Type: 34150/34151Ref. No.: 536428 lateral lead exitRef. No.: 536429 central lead exit
Lampholders for Discharge Lamps
73
10
9
8
7
6
5
4
3
2
1
GX10 LampholdersFor discharge lamps with base GX10
GX10 lampholder, for luminaires of protection class IICasing: PPS, black, T240, nominal rating: 2/250/5 kVPush-in twin terminals for stranded conductorswith ferrule bare end of cores max. Ø 1.8 mmFixing holes for screws M3Weight: 9 g, unit: 100 pcs.. Type: 31400Ref. No.: 509356
GX10 lampholder, for luminaires of protection class IICasing: steatite, cover plate: PPST240, nominal rating: 2/500/5 kVPush-in terminals for stranded conductorswith ferrule bare end of cores Ø 1.5–1.8 mmFor leads with outer diameter: max. 3 mmFixing holes for screws M3Weight: 14 g, unit: 100 pcs.Type: 31500Ref. No.: 536469
GX10 lampholderCasing: steatite, cover plate: PPST240, nominal rating: 2/500/5 kVWelded leads: 2x0.75 mm², stranded conductors,
length: 400 mm5 kV: Cu nickel-pIated, PTFE-insulation,Cu tinned, Si-insulation
Fixing holes for screws M3Weight: 36.3 g, unit: 100 pcs.Type: 31500Ref. No.: 549999
GX10 lampholder, for luminaires of protection class IICasing: steatite, cover plate: PPST240, nominal rating: 2/500/5 kVWelded leads: Cu nickel-pIated, stranded conductors
0.75 mm², double PTFE-insulation, length: 250 mmFixing holes for screws M3Weight: 23.3 g, unit: 100 pcs.Type: 31530Ref. No.: 543267
Lampholders for Discharge Lamps
74
GY9.5 LampholdersFor discharge lamps with base GY9.5
GY9.5 lampholderCasing: ceramic, cover plate: PPS, blackT240, nominal rating: 10/500/5 kV, contacts: NiLeads: Cu tinned, stranded conductors
5 kV: 1 mm², Si-insulation max. Ø 3.6 mm,length: 300 mm and Cu tinned,stranded conductors 0.75 mm², Si-insulation,length: 300 mm
Fixing holes for screws M3Weight: 48 g, unit: 150 pcs.Type: 37001Ref. No.: 533663´
G12, GX12-1, PG12-1, PG12-2 LampholdersFor discharge lamps with base G12, GX12 and PG12
G12 lampholdersCasing: ceramic, cover plate: LCPT250, nominal rating: 5/500/5 kVContacts: CrNiPush-in terminals for leads withferrule bare end of cores max. Ø 1.8 mmWeight: 30.7 g, unit: 25 pcs.Type: 42200/ 42210Ref. No.: 535750 fixing holes Ø 4.2 mmRef. No.: 535751 threaded bushes M3
G12 lampholdersCasing: ceramicT250, nominal rating: 5/500/5 kVContacts: CrNiWelded leads: Cu tinned, stranded conductors 1 mm²
Si-insulation, white, length: 300 mmWeight: 43/52 g, unit: 25 pcs.Type: 42222/42242Ref. No.: 535755 cover plate: LCPRef. No.: 543643 cover plate: ceramic
G12 lampholderCasing: LCP, blackT250, nominal rating: 2/500/5 kVContacts: CrNiPush-in terminals for leads withferrule bare end of cores max. Ø 1.8 mmFor tinned lead ends: 0.5–1 mm²Fixing holes for screws M4Weight: 13.6 g, unit: 250 pcs.Type: 42000Ref. No.: 509213
Lampholders for Discharge Lamps
75
10
9
8
7
6
5
4
3
2
1
GX12-1 lampholderCasing: ceramic, cover plate: PPS, blackT220, nominal rating: 2/500/5 kV, contacts: NiWelded leads: Cu tinned, stranded conductors
5 kV: 1 mm², Si-insulation, white,N: 0.75 mm², Si-insulation, brown,length: 300 mm
Fixing holes for screws M4Weight: 58.5 g, unit: 25 pcs.Type: 41900Ref. No.: 507656
GX12-1 lampholderCasing: LCP, blackT250, nominal rating: 2/500/5 kVContacts: CrNiPush-in terminals for leads withferrule on bare end of core max. Ø 1.8 mmor for tinned lead ends: 0.5–1 mm²Fixing holes for screws M4Weight: 13.6 g, unit: 50 pcs.Type: 42100Ref. No.: 509214
PG12-1 lampholderCasing: PPS, black, T220Nominal rating: 4/500/5 kV, contacts: CrNiPush-in terminals for leads withferrule on bare end of core max. Ø 1.8 mmor for tinned lead ends: 0.5–1 mm²Fixing holes for screws M4Weight: 20.2 g, unit: 100 pcs.Type: 31981Ref. No.: 505030
PG12-1 lampholderFor cover caps (see p. 310–312)Casing: PPS, black, T220Nominal rating: 4/500/5 kV, contacts: CrNiPush-in terminals for leads withferrule on bare end of core max. Ø 1.8 mmor for tinned lead ends: 0.5–1 mm²Fixing holes for screws M3Weight: 23 g, unit: 100 pcs.Type: 31980Ref. No.: 505029
Lampholders for Discharge Lamps
76
33
17
3,2
47
,4
35
23,6
4,3ø
38ø
3,5
ø
5
31
15
16
47
,4
24
38
ø
41
30
Ø4,4
Ø35
10
17,3
30,1
RX7s LampholdersIf the central hole on the bracket is used for fixing ithas to be ensured by an additional support within theluminaire that the bracket cannot be deformed. If thelampholders are used for lamps with ignition voltagemax. 20 kV the luminaire manufacturer is responsiblefor sufficient creepage distances and clearances.
Remark on lampholders type323 and 343:The luminaire design must ensure protection fromelectric shock as well as sufficient creepagedistances and clearances from live parts on theback of lampholder.
Type 343:With doubled insulated leadssuitable for luminaires of protectionclass II
RX7s lampholdersContact pin: Ni, nominal rating: 2/500/5 kVLead: Cu tinned, stranded conductors 1 mm²,
Si-insulation max. Ø 3.6 mm, length: 300 mmFixing holes for screws M4Weight: 23.3/20.1 g, unit: 25 pcs.Type: 31662/31672 PPS, black, T220Ref. No.: 107065 lead exit rightRef. No.: 107066 lead exit leftType: 31695/31696 LCP, black, T260Ref. No.: 504416 lead exit rightRef. No.: 504669 lead exit left
RX7s lampholderCasing: PPS, black, T220Contact pin: Cu, silver bulbNominal rating: 2/250/5 kVLead: Cu tinned, stranded conductors 1 mm²,
Si-insulation max. Ø 3.6 mm, length: 200 mmWith screw M4Weight: 14 g, unit: 300 pcs.Type: 34301Ref. No.: 509117
RX7s lampholderCasing: PPS, black, T220Contact pin: Cu, silver bulbNominal rating: 2/250/5 kVLeads: Cu tinned, stranded conductors 1 mm²,
Si-insulation max. Ø 3.6 mm, length: 200 mmOblong holes for screws M4Central hole for screw M4Other bracket versions on requestWeight: 43.8 g, unit: 200 pcs.Type: 34311 contact distance 114.2 mmRef. No.: 529841
RX7s lampholderCasing: PPS, black, T220Contact pin: Cu, silver bulbNominal rating: 2/250/5 kVLeads: Cu tinned, stranded conductors 1 mm²,
Si-insulation max. Ø 3.6 mm, length: 200 mmOblong holes for screws M4Central tapped hole M4Weight: 47.5 g, unit: 200 pcs.Type: 34326 contact distance: 132 mmRef. No.: 529845
Lampholders for Discharge Lamps
77
10
9
8
7
6
5
4
3
2
1
15
24,5
1,5
0,8
Z – 22,212,3
158,8
23
40
M49,5
65
26
4,22
4
36
Z-14 20Ø
4,5
18
8
30
5
13,35
31
Partly enclosed RX7s lampholderCasing: ceramic, T350Contact pin: Cu, silver bulbNominal rating: 4/500/5 kVLead: Cu tinned, stranded conductors 1 mm²,
Si-insulation max. Ø 3.6 mm, length: 200 mmFixing screw M4Weight: 26.2 g, unit: 300 pcs.Type: 32301Ref. No.: 100913
Partly enclosed RX7s lampholderCasing: ceramic, T350Contact pin: Cu, silver bulbNominal rating: 4/500/5 kVLeads: Cu tinned, stranded conductors 1 mm²,
Si-insulation max. Ø 3.6 mm, length: 200 mmOblong holes for screws M4Central hole for screw M4Weight: 74.8 g, unit: 200 pcs.Type: 32311 contact distance: 114.2 mmRef. No.: 100921
Partly enclosed RX7s lampholderCasing: ceramic, T350Contact pin: Cu, silver bulbNominal rating: 4/500/5 kVLeads: Cu tinned, stranded conductors 1 mm²,
Si-insulation max. Ø 3.6 mm, length: 200 mmOblong holes for screws M4Central tapped holes M4Weight: 76 g, unit: 200 pcs.Type: 32321 contact distance: 114.2 mmRef. No.: 100922
Partly enclosed RX7s lampholderCasing: ceramic, T350Contact pin: Cu, silver bulbNominal rating: 4/500/5 kVLeads: Cu tinned, stranded conductors 1 mm²,
Si-insulation max. Ø 3.6 mm, length: 200 mmOblong holes for screws M4Central hole for screw M4Weight: 74 g, unit: 200 pcs.Type: 32341 contact distance: 114.2 mmRef. No.: 100932
Partly enclosed RX7s lampholderCasing: ceramic, T350Contact pin: Cu, silver bulbNominal rating: 4/500/5 kVLeads: Cu tinned, stranded conductors 1 mm²,
Si-insulation max. Ø 3.6 mm, length: 200 mmOblong holes for screws M4Central hole for screw M5Weight: 75.5 g, unit: 200 pcs.Type: 32361 contact distance: 114.2 mmRef. No.: 100934
Lampholders for Discharge Lamps
78
Partly enclosed RX7s lampholderCasing: ceramic, T350Contact pin: Cu, silver bulbNominal rating: 4/500/5 kVLeads: Cu tinned, stranded conductors 1 mm²,
Si-insulation max. Ø 3.6 mm, length: 200 mmOblong holes for screws M4Central hole for screw M5Weight: 76.4 g, unit: 200 pcs.Type: 32381 contact distance: 114.2 mmRef. No.: 100937
Partly enclosed RX7s lampholderCasing: ceramic, T350Contact pin: Cu, silver bulbNominal rating: 4/500/5 kVLeads: Cu tinned, stranded conductors 1 mm²,
Si-insulation max. Ø 3.6 mm, length: 200 mmOblong holes for screws M4Central tapped hole M4Weight: 78.3 g, unit: 200 pcs.Type: 32326 contact distance: 132 mmRef. No.: 100925
Partly enclosed RX7s lampholderCasing: ceramic, T350Contact pin: Cu, silver bulbNominal rating: 4/500/5 kVLeads: Cu tinned, stranded conductors 1 mm²,
Si-insulation max. Ø 3.6 mm, length: 200 mmOblong holes for screws M4Central hole for screw M5Weight: 77.6 g, unit: 200 pcs.Type: 32330 contact distance: 132 mmRef. No.: 100928
Partly enclosed RX7s lampholderCasing: ceramic, T350Contact pin: Cu, silver bulbNominal rating: 4/500/5 kVLeads: Cu tinned, stranded conductors 1 mm²,
Si-insulation max. Ø 3.6 mm, length: 200 mmOblong holes for screws M4Central hole for screw M5Weight: 75.7 g, unit: 200 pcs.Type: 32336 contact distance: 132 mmRef. No.: 100931
Protection caps for RX7s lampholdersFor push-fit onto lampholders type 323Protection against electrical shockon the rear side of the lampholderLampholders with assembled protection capon requestWeight: 0.7/0.6 g, unit: 1000 pcs.Type: 97528Ref. No.: 507592 LCP, naturalRef. No.: 507593 PET, white
Lampholders for Discharge Lamps
79
10
9
8
7
6
5
4
3
2
1
RX7s lampholderCasing: ceramic, T250Contact pin: NiNominal rating: 10/500/5 kVLead: Cu tinned, stranded conductors 1 mm²,
Si-insulation max. Ø 3.6 mm, length: 300 mmFixing holes for screws M4Weight: 72 g, unit: 25 pcs.Type: 30602Ref. No.: 100723
RX7s lampholderCasing: ceramic, T250, contact pin: NiNominal rating: 10/500/20 kVLead: Cu tinned, stranded conductors 1 mm²,
Si-insulation with spun glass filler Ø 7 mm,for ignition voltage: max. 20 kV,length: 1000 mm
Fixing holes for screws M4Weight: 120 g, unit: 25 pcs.Type: 30620Ref. No.: 100741
Fc2 LampholdersFor discharge lamps with base Fc2
If the lampholders are used for lamps withignition voltage max. 20 kV the luminaire manu-facturer is responsible for sufficient creepagedistances and clearances.
Fc2 lampholderCasing: ceramic, T250Nominal rating: 10/500/5 kVContacts: NiLead: Cu tinned, stranded conductors 1 mm²,
Si-insulation max. Ø 3.6 mm, length: 300 mmFixing holes for screws M4Weight: 100 g, unit: 200 pcs.Type: 02500Ref. No.: 108937
Fc2 lampholderCasing: ceramic, T250Nominal rating: 10/500/5 kV, contacts: NiLead: Cu tinned, stranded conductors 1 mm²,
Si-insulation max. Ø 3.6 mm, length: 300 mmFixing screws M4, captiveWeight: 102 g, unit: 25 pcs.Type: 02574 rigid fixingRef. No.: 100096
Lampholders for Discharge Lamps
80
30,8
15,8
10,3
9,5 8,9 16,5
149 (150W)
149 (70W)
34,5
34
30
Ø4
,5
Ø7
,5
25
35
45
8,9 16,5
149 (150W)
149 (70W)
34,5
Ø7
,5
25
35
45
30,8
15,8
10,3
9,53
4
30
Ø4
,5
Fc2 lampholderCasing: ceramic, T250Nominal rating: 10/500/5 kV, contacts: NiLead: Cu tinned, stranded conductors 1 mm²,
Si-insulation max. Ø 3.6 mm, length: 300 mmFixing screws M4, captiveWeight: 102 g, unit: 25 pcs.Type: 02575 adjustable fixingRef. No.: 100098
Fc2 lampholderCasing: ceramic, T250Nominal rating: 10/500/20 kV, contacts: NiLead: Cu tinned, stranded conductors 1mm²,
Si-insulation with spun glass filler Ø 7 mm,for ignition voltage: max. 20 kV,length: 500 mm
Fixing screws M4, captiveWeight: 120 g, unit: 25 pcs.Type: 02525 rigid fixingRef. No.: 100082
Fc2 lampholderCasing: ceramic, T250Nominal rating: 10/500/20 kV, contacts: NiLead: Cu tinned, stranded conductors 1 mm²,
Si-insulation with spun glass filler Ø 7 mm,for ignition voltage: max. 20 kV,length: 500 mm
Fixing screws M4, captiveWeight: 120 g, unit: 25 pcs.Type: 02543 adjustable fixingRef. No.: 100086
Lamp safety catchFor push-fit onto the lampholders 100082,100086, 100096 and 100098Casing: ceramicSpring: stainless steelWeight: 21 g, unit: 50 pcs.Type: 86037Ref. No.: 103818
Lampholders for Discharge Lamps
81
10
9
8
7
6
5
4
3
2
1
K12x30s LampholdersFor discharge lamps with base K12x30s
K12x30s lampholdersSuitable for luminaires of protection class IICasing: LCP, black, T150Nominal rating: 4/500/3 kVContacts: CuSn6, silver platedLeads: Cu tinned, stranded conductors 1 mm²
Si-insulation, doubled insulatedRear recess M4, wrench size 7Rear and bottom fixing holes for screws M5Weight: 75.9/61.5 g, unit: 100 pcs.Type: 13010Ref. No.: 532430 lead length: 705 mmRef. No.: 532431 lead length: 155 mm
K12s-7 SupportFor metal halide lamps 1000 and 2000 WType Osram HQI TS and Radium HRI TS
The luminaire design must ensure protectionfrom electric shock as well as sufficient creepageand clearance distances.
K12s-7 supportCable connection on cable lug for lead0.75–2.5 mm²Casing: ceramic, T300Support: stainless steel, heat-resistantOblong holes for screws M5Weight: 70 g, unit: 25 pcs.Type: 21100Ref. No.: 107677
Lampholders for Discharge Lamps
82
top related