threaded & bayonet connectors for demanding environments...
Post on 06-Oct-2018
244 Views
Preview:
TRANSCRIPT
THREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS
MILITARY AND COMMERCIAL AVIATION MIL - DTL - 83723 SERIES III
2
This catalog defines rms MIL-DTL-83723, Series III Connectors. There are varieties of connectors within this cylindrical family, with the following options and characteristics available:
Two coupling styles: Bayonet and Threaded Plugs and Receptacles.
Both coupling styles inter-mate with MIL-DTL-26500 connectors (exception: shell size 8 threaded, does not mate with M26500 threaded).
Aluminum and passivated stainless steel versions.
A variety of mounting configurations.
A variety of material finishes are offered such as electroless nickel, olive drab cadmium and black anodizing. Other finishes are available with a commercial equivalent.
A double ended plastic tool is used, where one end is for insertion and the other end is for removal of contacts.
Alternate key/keyway positions prevent cross mating of adjacent connectors having the same insert arrangement.
Positive alignment of pin contacts by the lead in chamfers of the closed entry hard socket inserts.
Raised moisture seal barriers around each pin contact that mate with the lead in chamfers of the hard socket insert.
The elastomer grommet is able to seal over a wide range of wire diameters and has a triple wire seal in each cavity.
The rear release crimped contact system features a stamped retaining clip captivated by molded in shoulders of each contact cavity in the insulator. This produces a very stable contact.
High temperature firewall versions.
Can be ordered by military or equivalent rms part numbers.8600 Evergreen Blvd. Minneapolis, MN 55433
763.786.1520 800.373.1520
rmsconnectorscs@machine.com
Should you require more information or have a special application need arise, please contact:
CONNECTORS FOR DEMANDING ENVIRONMENTS
THREADED AND BAYONET MILITARY AND COMMERCIAL AVIATION
3
Table of Contents
How to Order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Part Number Definition . . . . . . . . . . . . . . . . . . . . . . . . 5
List of Slash Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . 6
rms Part Number Definition . . . . . . . . . . . . . . . . . . . . 7
Shell and Insert Configuration Chart . . . . . . . . . . . . . 8
General Performance Characteristics . . . . . . . . . . . 11
Exploded View of Connectors . . . . . . . . . . . . . . . . . . . 13
/71 Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Receptacle, Bayonet, Socket Contact, Flange Mount
/72 Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Receptacle, Bayonet, Pin Contact, Flange Mount
/73 Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Receptacle, Bayonet, Socket Contact, Single-Hole Mount
/74 Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Receptacle, Bayonet, Pin Contact, Single-Hole Mount
/75 Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Plug, Bayonet, Socket Contact
/76 Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19Plug, Bayonet, Pin Contact
/77 Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20Plug, Bayonet, Socket Contact, With RFI Spring
/78 Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21Plug, Bayonet, Pin Contact, With RFI Spring
/82 Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22Receptacle, Socket Contact, Threaded Coupling, Flange Mount
/83 Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23Receptacle, Pin Contact, Threaded Coupling, Flange Mount
/84 Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24Receptacle, Socket Contact, Threaded Coupling, Single-Hole Mount
/85 Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Receptacle, Pin Contact, Threaded Coupling, Single-Hole Mount
/86 Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26Plug, Socket Contact, Threaded Coupling
/87 Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Plug, Pin Contact, Threaded Coupling
/91 Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28Plug, Socket Contact, Threaded Coupling, With RFI Spring
/92 Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29Plug, Pin Contact, Threaded Coupling, With RFI Spring
/95 Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30Plug, Socket Contact, Threaded, Without RFI Spring, Self-Locking
/96 Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31Plug, Pin Contact, Threaded, Without RFI Spring, Self-Locking
/97 Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32Plug, Socket Contact, Threaded Coupling, Self-Locking, With RFI Spring
/98 Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33Plug, Pin Contact, Threaded Coupling, Self-Locking, With RFI Spring
R0709 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Contacts/Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
/71 Connector /72 Connector /73 Connector
/74 Connector /75 Connector /76 Connector
/77 Connector /78 Connector /82 Connector
/83 Connector /84 Connector /85 Connector
/86 Connector /87 Connector /91 Connector
/92 Connector /95 Connector /96 Connector
/97 Connector /98 Connector R0709 Series
4
Step 1. Choose MIL-DTL-83723 or Commercial Connector Type MILITARY # M83723/83 G 22 55 N - LC See page 5 for further definition.
COMMERCIAL # R0737 22 G 55 P N - 0 00 See page 7 for further definition.
Step 2. Select a Connector StyleMILITARY # M83723/83 See page 5 for further definition.
COMMERCIAL # R0737 See page 7 for further definition.
Step 3. Select a Service ClassMILITARY # M83723/83 G See page 5 for further definition .
COMMERCIAL # R0737 xx G See page 7 for further definition.
Step 4A. Select a Shell Size & InsertArrangement Chart on Page 7
MILITARY # M83723/83 G 22 55
Step 4B. (for Commercial) Select the Contact Type Commercial # R0737 22 G 55 P
Step 5. Select an Alternate Keying PositionUse N for normal. Use 6, 7, 8, 9, or Y for alternate keying positions.
MILITARY # M83723/83 G 22 55 N
COMMERCIAL # R0737 22 G 55 P N
Step 6. Select Contacts and BackshellMILITARY # M83723/83 G 22 55 N - LC See page 5 for further definition.
COMMERCIAL # R0737 22 G 55 P N - 0 00 See page 7 for further definition.
P - Pin Contacts
S - Socket Contacts
How to Order MIL - DTL - 83723 Series III
5
MIL - DTL - 83723 Part Number Definition
M83723 /83 G 22 55 N - LC
Service/ClassA - Anodize (Aluminum Shells)
G - Stainless Steel (Passivated)
K - MIL Firewall,Stainless Steel, (Passivated)
M - Aluminum Shell, Electrodeposited Aluminum, Conductive Finish, Nonreflective,500HoursSaltSpray,FluidResistantInsert
N- MILFirewall,ShellNiPlatedStainlessSteel(.0001-.0002 Electrodeposited)PlugWithRFISpring,Receptacles (Hermetic)NiPlatedStainlessSteelPlug
R - Aluminum Shell, Electroless Ni Plated
S - MILFirewall,StainlessSteel,(Passivated)WithRFISpring, Self-Locking Plug
T - AluminumShell,NickelFluorocarbonPolymer,ConductiveFinish, Nonreflective,500HoursSaltSpray,FluidResistantInsert
W- CadmiumPlating(OliveDrab)Conductive500HoursSaltSpray
Z - AluminumShellZincNickel,ConductiveFinish,500HoursSaltSpray
LC-LessGoldPlatedContacts,SealPlugsandInsertion/RemovalTool
Blank-WithGoldPlatedContacts,SealPlugsandInsertion/RemovalTool
Shell Polarity/Keying PositionN, 6, 7, 8, 9, Y
Style/ Slash SheetSee Page 6
Series Designation(M83723)
See Page 7
Shell Size08,10,12,14,16,18,20,22,24
Insert Arrangement
6
MIL-DTL-83723 Slash Sheets Circular Electric, Environment Resisting
/71 Connector, Receptacle, Bayonet, Socket Contact, Flange Mount (A, M, R, T, W, G, Z)
/72 Connector, Receptacle, Bayonet, Pin Contact, Flange Mount (A, M, R, T, W, G, Z)
/73 Connector, Receptacle, Bayonet, Socket Contact, Single-Hole Mount (A, M, R, T, W, G, Z)
/74 Connector, Receptacle, Bayonet, Pin Contact, Single-Hole Mount (A, M, R, T, W, G, Z)
/75 Connector, Plug, Bayonet, Socket Contact (A, M, R, T, W, G, Z)
/76 Connector, Plug, Bayonet, Pin Contact (A, M, R, T, W, G, Z)
/77 Connector, Plug, Bayonet, Socket Contact, With RFI Spring (M, R, T, W, G, Z)
/78 Connector, Plug, Bayonet, Pin Contact, With RFI Spring (M, R, T, W, G, Z)
/82 Connector, Receptacle, Socket Contact, Threaded Coupling, Flange Mount (A, K, M, R, T, W, G, N, S, Z)
/83 Connector, Receptacle, Pin Contact, Threaded Coupling, Flange Mount (A, K, M, R, T, W, G, N, S, Z)
/84 Connector, Receptacle, Socket Contact, Threaded Coupling, Single-Hole Mount (A, K, M, R, W, G, N, S, Z)
/85 Connector, Receptacle, Pin Contact, Threaded Coupling, Single-Hole Mount (A, K, M, R, T, W, G, N, S, Z)
/86 Connector, Plug, Socket Contact, Threaded Coupling (A, K, M, R, T, W, G, Z)
/87 Connector, Plug, Pin Contact, Threaded Coupling (A, K, M, R, T, W, G, Z)
/91 Connector, Plug, Socket Contact, Threaded Coupling, With RFI Spring (M, R, T, W, G, Z)
/92 Connector, Plug, Pin Contact, Threaded Coupling, With RFI Spring (M, R, T, W, G, Z)
/95 Connector, Plug, Socket Contact, Threaded, Without RFI Spring, Self-Locking (A, M, R, T, W, G, K, Z)
/96 Connector, Plug, Pin Contact, Threaded, Without RFI Spring, Self-Locking (A, M, R, T, W, G, K, Z)
/97 Connector, Plug, Socket Contact, Threaded Coupling, Self-Locking, With RFI Spring (N, S)
/98 Connector, Plug, Pin Contact, Threaded Coupling, Self-Locking, With RFI Spring (N, S)
List of Slash Numbers
7
rms Part Number Definition
R073X 22 G 55 P N - 0 00 0
Shell PolarityN,6,7,8,9,10
Contact Style“P” - Pin Contact“S” - Socket Contact
Shell Size08,10,12,14,16,18,20,22,24,28
Insert Arrangement
0-LessContacts,SealPlugsandInsertion/RemovalTool2-WithGoldPlatedContacts,SealPlugsandInsertion/RemovalTool
00 - Less Cable Clamp01-With90°CableClamp02 - With Straight Cable Clamp03-With45°CableClamp04-With90°Self-lockingCableClamp05 - With Straight Self-locking Cable Clamp06-With45°Self-lockingCableClamp
Consult factory for other options.
Cable Clamp Finish Code0 - Anodize (Black)1 - Electroless Nickel2 - Cad Plate w/Olive Drab Over Electroless Nickel3 - Stainless Steel, Passivate
Order Code
Series Designation (M83723)R0733 Connector,Plug,Circular,Electric,EnvironmentResisting,Bayonet,WithRFISpring(/77,/78)R0734 Connector,Plug,Circular,Electric,EnvironmentResisting,Bayonet,(/75,/76)R0735 Connector,Receptacle,Circular,Electric,EnvironmentResisting,Bayonet,(/71,/72)R0736 Connector,Plug,Circular,Electric,EnvironmentResisting,ThreadedCoupling,Self-Locking(/95,/96,/97,/98)R0737 Connector,Receptacle,Circular,Electric,EnvironmentResisting,Threaded(/82,/83)R0738 ESC-10DesignConnector,Plug,Circular,Electric,EnvironmentResisting,ThreadedCoupling,Self-Locking,StainlessSteelR0739 ESC-10DesignConnector,Receptacle,Circular,Electric,EnvironmentResisting,ThreadedCoupling,StainlessSteelR0741 Connector,Receptacle,Circular,Electric,EnvironmentResisting,BayonetCoupling,Single-HoleMount.(/73,/74)R0742 Connector,Receptacle,Circular,Electric,EnvironmentResisting,ThreadedCoupling,Single-HoleMount(/84,/85)R0743 Connector,Plug,Circular,Electric,EnvironmentResisting,ThreadedCoupling(/86,/87)R0744 Connector,Plug,Circular,Electric,EnvironmentResisting,ThreadedCouplingWithRFISpring(/91,/92)
ClassA - Anodize (Black)G - Stainless Steel, PassivatedK - MIL Firewall, Stainless Steel, (Passivated).M - Aluminum Shell, Electrodeposited Aluminum, Conductive Finish, Nonreflective,500HoursSaltSpray,FluidResistantInsertN-MILFirewall,ShellNiPlatedStainlessSteel(.0001-.0002 Electrodeposited)WithRFISpringR - Electroless Nickel On AluminumS-MILFirewall,StainlessSteel,(Passivated)WithRFISpring,Self-lockingPlugT - AluminumShell,NickelFluorocarbonPolymer,ConductiveFinish, Nonreflective,500HoursSaltSpray,FluidResistantInsertW-CadPlating,Conductive,500HoursSaltSprayZ - AluminumShellZincNickel,ConductiveFinish,500HoursSaltSprayKE-HighTemp.StainlessSteel(260°C)FirewallWithoutRFISpring,Self-lockingSE-HighTemp.StainlessSteel(260°C)FirewallWithRFISpring,Self-lockingKS-MILFirewall,StainlessSteelPlugSelf-lockingWithoutRFISpring
8
Shell and Insert Configuration
Shell & InsertContacts
Quantity Size08-02 2 2008-03 3 2008-98 3 2010-02 2 2010-05 5 2010-06 6 2010-20 2 1612-03 3 1612-12 12 2014-04 4 1214-07 7 16
14-129 203 16
14-15 15 2016-10 10 1616-24 24 2018-08 8 1218-14 14 1618-31 31 2020-16 16 16
20-2519 206 12
20-2824 204 12
20-3937 202 16
20-41 41 2022-12 12 1222-19 19 16
22-3226 206 12
22-3927 2012 16
22-55 55 2024-19 19 1224-30 30 16
24-4323 2020 16
24-5755 202 12
24-61 61 2028-42 42 16
9
Shell and Insert Configuration Continued
* - rms Designation
t - #1 shielded contact is interchangeable with #12 power contact
Insert arrangements are per MIL-STD-1554 except 24-30 and 28-42, which are available to RMS part number only.
(Continued On Page 10)
Shell Size - 20
16 #16 ContactsInsert 20-16
19 #20 Contacts6 #12 ContactsInsert 20-25t
24 #20 Contacts4 #12 ContactsInsert 20-28t
37 #20 Contacts2 #16 Contacts
Insert 20-39
41 #20 ContactsInsert 20-41
Shell Size - 18Shell Size - 16
10 #16 ContactsInsert 16-10
24 #20 ContactsInsert 16-24
8 #12 ContactsInsert 18-8t
18-08*
14 #16 ContactsInsert 18-14
31 #20 ContactsInsert 18-31
Shell Size - 12 Shell Size - 14
3 #16 ContactsInsert 12-3
12-03*
12 #20 ContactsInsert 12-12
4 #12 ContactsInsert 14-4t
14-04*
7 #16 ContactsInsert 14-7
14-07*
9 #20 Contacts3 #16 Contacts
Insert 14-12
15 #20 ContactsInsert 14-15
Shell Size - 8 Shell Size - 10
2 #20 ContactsInsert 8-2
08-02*
3 #20 ContactsInsert 8-3
08-03*
3 #20 ContactsInsert 8-98
08-98*
2 #16 ContactsInsert 10-20
6 #20 ContactsInsert 10-6
10-06*
5 #20 ContactsInsert 10-5
10-05*
2 #20 ContactsInsert 10-2
10-02*
10
* - rms Designation
t - #1 shielded contact is interchangeable with #12 power contact
Insert arrangements are per MIL-STD-1554 except 24-30 and 28-42, which are available to RMS part number only.
Shell and Insert Configuration Continued
Shell Size - 28
Shell Size - 24
Shell Size - 22
12 #12 ContactsInsert 22-12t
19 #16 ContactsInsert 22-19
27 #20 Contacts12 #16 Contacts
Insert 22-39t
55 #20 ContactsInsert 22-55
26 #20 Contacts6 #12 ContactsInsert 22-32t
19 #12 ContactsInsert 24-19t
55 #20 Contacts2 #12 ContactsInsert 24-57t
61 #20 ContactsInsert 24-61
42 #16 ContactsInsert 28-42
30 #16 ContactsInsert 24-30
23 #20 Contacts20 #16 Contacts
Insert 24-43
11
General MIL - DTL - 83723 Performance Characteristics
Test Description Test Requirement Test Result
Maintenance Aging Connectors, with contacts loaded shall be coupled and uncoupled 10 times. Remove & reinsert 20% of the contacts (min. of 3) 10 times in both connectors halves. Connectors must meet all succeeding tests.
No observable damage. Connectors met or exceeded all requirement of succeeding tests.
Contact Retention Contact when pushed from either axial direction with a specified load (per contact size) will not be displaced more than .012.
Met the requirement of .012 or less displacement.
Dielectric Withstanding Voltage – Altitude and Sea level
Mated & unmated connectors at 110,000 feet altitude shall be tested with 200 volts, at 70,000 feet shall be tested with 375 volts and at 50,000 feet shall be tested at 500 volts. Connectors at sea level shall be tested at 1500 volts. There shall be no evidence of breakdown or flashover.
There was no evidence of breakdown or flashover.
Thermal Shock The connector shall be subjected to cycles of -65°C to 200°C for specified duration, five times with no damage.
After 5 cycles there was no evidence of cracking, fractures or other damage detrimental to connector operation.
Random Vibration Wired and mated connectors shall be mounted in an appropriate fixture on a vibration table. During vibration there shall be no discontinuities of one microsecond or greater with all contacts wired in a series arrangement. Vibration shall be per specification in two perpendicular axes with no discontinuity or damage.
There was no discontinuity or evidence of damage.
Shock 300 g shock wave per specification without sustaining any discontinuity or damage.
Met requirement of no discontinuity or damage.
Durability Connectors shall be mated and un-mated for cycles specified (500 cycles for Bayonet Type, 250 cycles for Threaded Type).
Met requirements of no damage to connector after mating 250 cycles for threaded and 500 for bayonet.
Salt Spray No sign of any corrosion when sample is tested in the Salt Spray for the specified time.
Met requirement of no base metal exposed.
Ozone Mated connectors shall have two hours of exposures at ambient (23°C) temperature with Ozone levels of 100 ppm to 150 ppm.
No damage occurred to the connector or dielectric material.
Insulation Resistance (Ambient & Elevated temp)
When measured between three adjacent contacts (min.) and three contacts closest to shell and the shell itself, the insulation resistance shall be 5000 megohms between adjacent contacts and the shell and 200 megohms when tested at 200°C.
Insulation Resistance exceeded 5000 megohms at ambient and 200 megohms at elevated temperature.
Altitude Immersion Mated connectors shall be submersed in salt water & cycled per specification. They must then pass the IR & DWV test requirement after the 1st and 3rd cycle.
Met requirements for IR and DWV as specified in the test sequence.
Temperature Life with Contact Loading
1000 hours at 200 degrees C with one contact of both samples (mated pair) having a load of 10 lbs applied. Contact retention shall be measured before and after of each sample pair. Mated contact shall be monitored for discontinuities during the test period.
Met requirements of contact retention/displacement after test with no discontinuities.
Moisture Resistance Subject to 10 cycles of high humidity per specification with last 5 cycles incorporating Hot & Cold.
Met requirements of 100 megohms minimum IR after 10th cycle.
(Continued On Page 12)
12
Test Description Test Requirement Test Result
Fluid Immersion Mated connector pair shall be immersed & cycled in required fluids (10 fluids) without damage. The Coupling Torque shall be measured before and after test and DWV test upon completion of last cycle.
Met requirements of torque and DWV with no damage to mating face or other surfaces.
Firewall Subjected to 2000°F flame for 20 minutes without passing the flame through and while meeting electrical requirements per specification.
Met requirements of flame test and electrical function.
Cavity to Cavity Leakage
Apply 1.5 PSI test between contact cavities per specification. No leakage detected between cavities
Contact Walkout Apply a 3 pound pull to contact with a 360 degree fixture per specification for 100 cycles. Contact shall not move out of position.
Contact met requirement of not becoming dislodged from the connector contact cavity.
Installing and Removal Tool Abuse
Subject contacts to the specified pressure, rotation & cycles of the insertion and removal tools.
No damage detected with the contact, connector insert or contact retaining mechanism.
Pin Stability Place a side load on the end of the test pin per specification to determine displacement of mating end.
Met requirements of contact displacement.
Retention System Fluid
Unmated connectors without contacts shall be immersed in fluids & then drained per specification followed by subjecting the connectors to the contact retention test.
Met requirement of contact retention test.
External Bending Moment
With the receptacle mounted on a panel, the connector accessory end of the mating Plug connector shall be weighted down per specification.
No damage detected to accessory end.
Accessory Thread Strength
Connector pair mounted as above. Apply the torque to the accessory thread as specified for the plug and receptacle.
No damage to connector mating or accessory threads.
Electrolytic Erosion Salt water solution shall be placed in the mating interface of the pin connector mating area and the voltage applied per specification.
No damage to connector mating face.
Shell Spring Finger Forces & Conductivity
RFI grounding spring shall be measured for mating force per specification & shell-to-shell conductivity shall be tested on shells (except Class A).
RFI Grounding Spring met force and shell-to-shell conductivity requirements.
RFI Shielding Test RFI shielding effectiveness per specification. Met requirements.
General MIL - DTL - 83723 Performance Characteristics
(Continued From Page 11)
13
RETAINER RINGINSERT
GROMMET (PIN)
REAR INSERT(PIN)
CONTACT RETAINERCLIPS
(PIN)
RETAINER RING
FACE SEAL
FRONT INSERT
THREADEDPLUG SHELL,
THREADEDCOUPLING RING,
MIL-83723/87 THREADED PLUG ASSEMBLY (PIN)
O-RING
THREADED
RECEPTACLE,FLANGE MOUNT,
(SOCKET)FRONT INSERT
CONTACT RETAINERCLIPS
REAR INSERT(SOCKET)
GROMMET(SOCKET)
INSERTRETAINTER RING,
MIL-83723/82 THREADED RECEPTACLE ASSEMBLY
(SOCKET)
Exploded View of Connectors
14
/71 Series III MIL - DTL - 83723/71 Series III
Connector Receptacle
Bayonet Socket Contact Flange Mount
Class A, M, R, T, W, G, Z (3 Tab Serrations)
R0735 xx x xx S N
rms Series Designation
Shell Size
Class
Insert
Polarity
SIZE “A” “B” “C” “D” THREAD CLASS 2A
8
.125
.116
.594 .812 .5000-20UNF
10 .719 .937 .6250-24UNEF
12 .812 1.031 .7500-20UNEF
14 .906 1.125 .8750-20UNEF
16 .969 1.250 1.0000-20UNEF
18 1.062 1.343 1.0625-18UNEF
20 1.156 1.437 1.1875-18UNEF
22 1.250 1.562 1.3125-18UNEF
24 .154 .146
1.375 1.703 1.4375-18UNEF
28 1.562 1.200 1.7500-18UNS
* Dimensions are in inches.
* Unless otherwise specified, tolerances shall be +/-.005 for three decimal places.
* Size 28 rms part number only.
A(4HOLES)
B(2)
C(2)RM
S1.300MAX
.540MAX
.072/.052.728/.708DTHREAD
15
/72 Series III MIL - DTL - 83723/72 Series III
Connector Receptacle
Bayonet Pin Contact
Flange Mount
Class A, M, R, T, W, G, Z (3 Tab Serrations)
R0735 xx x xx P N
rms Series Designation
Shell Size
Class
Insert
Polarity
C(2)
B(2)
A(4HOLES)
RMS1.300MAX
.540MAX
.072/.052.728/.708
DTHREAD
SIZE “A” “B” “C” “D” THREAD CLASS 2A
8
.125
.116
.594 .812 .5000-20UNF
10 .719 .937 .6250-24UNEF
12 .812 1.031 .7500-20UNEF
14 .906 1.125 .8750-20UNEF
16 .969 1.250 1.0000-20UNEF
18 1.062 1.343 1.0625-18UNEF
20 1.156 1.437 1.1875-18UNEF
22 1.250 1.562 1.3125-18UNEF
24 .154 .146
1.375 1.703 1.4375-18UNEF
28 1.562 1.200 1.7500-18UNS
* Dimensions are in inches.
* Unless otherwise specified, tolerances shall be +/-.005 for three decimal places.
* Size 28 rms part number only.
16
/73 Series III MIL - DTL - 83723/73 Series III
Connector Receptacle
Bayonet Socket Contact
Single-Hole Mount
Class A, M, R, T, W, G, Z (3 Tab Serrations)
R0741 xx x xx S N
rms Series Designation
Shell Size
Class
Insert
Polarity
SIZE “A” MAX (2) “B” THREAD CLASS 2A
“C” THREAD CLASS 2A
8 .979 .6250-20UN .5000-20UNF
10 1.104 .7500-20UNEF .6250-24UNEF
12 1.291 .9375-20UNEF .7500-20UNEF
14 1.391 1.000-20UNEF .8750-20UNEF
16 1.516 1.125-20UNEF 1.0000-20UNEF
18 1.641 1.2500-18UNEF 1.0625-18UNEF
20 1.766 1.3750-18UNEF 1.1875-18UNEF
22 1.954 1.5000-18UNEF 1.3125-18UNEF
24 2.079 1.6250-18UNEF 1.4375-18UNEF
* Dimensions are in inches.
* Unless otherwise specified, tolerances shall be +/-.005 for three decimal places.
AMAX(2)
1.300MAX
.539MAX.781/.761
BTHREADCTHREAD
17
/74 Series III MIL - DTL - 83723/74 Series III
Connector Receptacle
Bayonet Pin Contact
Single-Hole Mount
Class A, M, R, T, W, G, Z (3 Tab Serrations)
R0741 xx x xx P N
rms Series Designation
Shell Size
Class
Insert
Polarity
AMAX(2)
1.300MAX
.781/.761.539MAX
BTHREADCTHREAD
SIZE “A” MAX (2) “B” THREAD CLASS 2A
“C” THREAD CLASS 2A
8 .979 .6250-20UN .5000-20UNF
10 1.104 .7500-20UNEF .6250-24UNEF
12 1.291 .9375-20UNEF .7500-20UNEF
14 1.391 1.000-20UNEF .8750-20UNEF
16 1.516 1.125-20UNEF 1.0000-20UNEF
18 1.641 1.2500-18UNEF 1.0625-18UNEF
20 1.766 1.3750-18UNEF 1.1875-18UNEF
22 1.954 1.5000-18UNEF 1.3125-18UNEF
24 2.079 1.6250-18UNEF 1.4375-18UNEF
* Dimensions are in inches.
* Unless otherwise specified, tolerances shall be +/-.005 for three decimal places.
18
/75 Series III MIL - DTL - 83723/75 Series III
Connector Plug
Bayonet Socket Contact
Class A, M, R, T, W, G, Z (3 Tab Serrations)
R0734 xx x xx S N
rms Series Designation
Shell Size
Class
Insert
Polarity
SIZE ”A” MAX “B” THREAD CLASS 2A
8 .776 .5000-20UNF
10 .906 .6250-24UNEF
12 1.078 .7500-20UNEF
14 1.141 .8750-20UNEF
16 1.266 1.0000-20UNEF
18 1.375 1.0625-18UNEF
20 1.510 1.1875-18UNEF
22 1.625 1.3125-18UNEF
24 1.760 1.4375-18UNEF
28 2.159 1.7500-18UNS
* Dimensions are in inches.
* Unless otherwise specified, tolerances shall be +/-.005 for three decimal places.
* Size 28 rms part number only.
AMAX
RMS
1.230MAX
.320MIN
BTHREAD
19
/76 Series III MIL - DTL - 83723/76 Series III
Connector Plug
Bayonet Pin Contact
Class A, M, R, T, W, G, Z (3 Tab Serrations)
R0734 xx x xx P N
rms Series Designation
Shell Size
Class
Insert
Polarity
AMAX
RMS
1.230MAX
.320MIN
SIZE ”A” MAX “B” THREAD CLASS 2A
8 .776 .5000-20UNF
10 .906 .6250-24UNEF
12 1.078 .7500-20UNEF
14 1.141 .8750-20UNEF
16 1.266 1.0000-20UNEF
18 1.375 1.0625-18UNEF
20 1.510 1.1875-18UNEF
22 1.625 1.3125-18UNEF
24 1.760 1.4375-18UNEF
28 2.159 1.7500-18UNS
* Dimensions are in inches.
* Unless otherwise specified, tolerances shall be +/-.005 for three decimal places.
* Size 28 rms part number only.
BTHREAD
20
/77 Series III MIL - DTL - 83723/77 Series III
Connector Plug
Bayonet Socket Contact With RFI Spring
Class M, R, T, W, G, Z (3 Tab Serrations)
R0733 xx x xx S N
rms Series Designation
Shell Size
Class
Insert
Polarity
AMAX
RMS
1.230MAX
.320MIN
RFISPRING
BTHREAD
SIZE ”A” MAX “B” THREAD CLASS 2A
8 .776 .5000-20UNF
10 .906 .6250-24UNEF
12 1.078 .7500-20UNEF
14 1.141 .8750-20UNEF
16 1.266 1.0000-20UNEF
18 1.375 1.0625-18UNEF
20 1.510 1.1875-18UNEF
22 1.625 1.3125-18UNEF
24 1.760 1.4375-18UNEF
28 2.159 1.7500-18UNS
* Dimensions are in inches.
* Unless otherwise specified, tolerances shall be +/-.005 for three decimal places.
* Size 28 rms part number only.
21
/78 Series III MIL - DTL - 83723/78 Series III
Connector Plug
Bayonet Pin Contact
With RFI Spring
Class M, R, T, W, G, Z (3 Tab Serrations)
R0733 xx x xx P N
rms Series Designation
Shell Size
Class
Insert
Polarity
AMAX
RMS
1.230MAX
.320MIN
RFISPRING
BTHREAD
SIZE ”A” MAX “B” THREAD CLASS 2A
8 .776 .5000-20UNF
10 .906 .6250-24UNEF
12 1.078 .7500-20UNEF
14 1.141 .8750-20UNEF
16 1.266 1.0000-20UNEF
18 1.375 1.0625-18UNEF
20 1.510 1.1875-18UNEF
22 1.625 1.3125-18UNEF
24 1.760 1.4375-18UNEF
28 2.159 1.7500-18UNS
* Dimensions are in inches.
* Unless otherwise specified, tolerances shall be +/-.005 for three decimal places.
* Size 28 rms part number only.
22
/82 Series III MIL - DTL - 83723/82 Series III
Connector Receptacle
Socket Contact Threaded Coupling
Flange MountClass A, K, M, R, T, W, G, Z (3 Serrations) Class N & S (Full Serrations)
R0737 xx x xx S N
rms Series Designation
Shell Size
Class
Insert
Polarity
R0737 xx x xx S N
rms Series Designation
Shell Size
Class
Insert
Polarity
RMS
E(2)
1.240MAX
.728/.708
(.480MAX)
.072/.052
BTHREAD
D(2)
C(4HOLES) ATHREAD
RMS
E(2)
D(2)
C(4HOLES) ATHREAD
.728/.708
1.340MAX
(.580MAX)
.072/.052
.160/.010
BTHREAD
SIZE “A” THREAD CLASS 2A
“B” THREAD CLASS 2A ”C” “D” “E”
8 .5625-24UNEF .5000-20UNF
.125
.116
.594 .812
10 .6875-24UNEF .6250-24UNEF .719 .937
12 .8750-20UNEF .7500-20UNEF .812 1.031
14 .9375-20UNEF .8750-20UNEF .906 1.125
16 1.0625-18UNEF 1.0000-20UNEF .969 1.250
18 1.1875-18UNEF 1.0625-18UNEF 1.062 1.343
20 1.3125-18UNEF 1.1875-18UNEF 1.156 1.437
22 1.4375-18UNEF 1.3125-18UNEF 1.250 1.562
24 1.5625-18UNEF 1.4375-18UNEF .154 .145
1.375 1.703
28 1.8125-16UN 1.7500-18UNS 1.562 1.200
* Dimensions are in inches.
* Unless otherwise specified, tolerances shall be +/-.005 for three decimal places.
* Size 28 rms part number only.
* 3 Serrations
23
Connector Receptacle Pin Contact
Threaded Coupling Flange Mount
Class A, K, M, R, T, W, G, Z (3 Serrations) Class N & S (Full Serrations)
R0737 xx x xx P N
rms Series Designation
Shell Size
Class
Insert
Polarity
R0737 xx x xx P N
rms Series Designation
Shell Size
Class
Insert
Polarity
SIZE “A” THREAD CLASS 2A
“B” THREAD CLASS 2A ”C” “D” “E”
8 .5625-24UNEF .5000-20UNF
.125
.116
.594 .812
10 .6875-24UNEF .6250-24UNEF .719 .937
12 .8750-20UNEF .7500-20UNEF .812 1.031
14 .9375-20UNEF .8750-20UNEF .906 1.125
16 1.0625-18UNEF 1.0000-20UNEF .969 1.250
18 1.1875-18UNEF 1.0625-18UNEF 1.062 1.343
20 1.3125-18UNEF 1.1875-18UNEF 1.156 1.437
22 1.4375-18UNEF 1.3125-18UNEF 1.250 1.562
24 1.5625-18UNEF 1.4375-18UNEF .154 .146
1.375 1.703
28 1.8125-16UN 1.7500-18UNS 1.562 1.200
* Dimensions are in inches.
* Unless otherwise specified, tolerances shall be +/-.005 for three decimal places.
* Size 28 rms part number only.
RMS
RMS
1.240MAX 1.340MAX
E(2)E(2)
D(2)D(2)
ATHREAD ATHREADBTHREAD BTHREAD
.072/.052.072/.052
.160/.010
(.480MAX)(.580MAX)
.728/.708 .728/.708
C(4HOLES) C(4HOLES)
* 3 Serrations
/83 Series III MIL - DTL - 83723/83 Series III
24
Connector Receptacle
Socket Contact Threaded Coupling Single-Hole Mount
Class A, K, M, R, T, W, G, Z (3 Serrations) Class N & S (Full Serrations)
R0742 xx x xx S N
rms Series Designation
Shell Size
Class
Insert
Polarity
R0742 xx x xx S N
rms Series Designation
Shell Size
Class
Insert
Polarity
SIZE “A” MAX (2) “B” THREAD CLASS 2A
“C” THREAD CLASS 2A
“D THREAD CLASS 2A
8 .980/.949 .5625-24UNEF .6250-25UN .5000-20UNF
10 1.104/1.073 .6875-24UNEF .7500-20UNEF .6250-24UNEF
12 1.291/1.260 .8750-20UNEF .9375-20UNEF .7500-20UNEF
14 1.391/1.360 .9375-20UNEF 1.0000-20UNEF .8750-20UNEF
16 1.516/1.485 1.0625-18UNEF 1.1250-18UNEF 1.0000-20UNEF
18 1.641/1.610 1.1875-18UNEF 1.2500-18UNEF 1.0625-18UNEF
20 1.766/1.735 1.3125-18UNEF 1.3750-18UNEF 1.1875-18UNEF
22 1.954/1.923 1.4375-18UNEF 1.5000-18UNEF 1.3125-18UNEF
24 2.079/2.084 1.5625-18UNEF 1.6250-18UNEF 1.4375-18UNEF
* Dimensions are in inches.
* Unless otherwise specified, tolerances shall be +/-.005 for three decimal places.
* 3 Serrations
* Full Serration
AMAX(2) AMAX(2)
1.240MAX 1.340MAX
.781/.761 .781/.761(.479MAX) (.580MAX)
BTHREAD BTHREAD
CTHREAD CTHREAD
DTHREADDTHREAD
/84 Series III MIL - DTL - 83723/84 Series III
25
/85 Series III MIL - DTL - 83723/85 Series III
Connector Receptacle Pin Contact
Threaded Coupling Single-Hole Mount
Class A, K, M, R, T, W, G, Z (3 Serrations) Class N & S (Full Serrations)
R0742 xx x xx P N
rms Series Designation
Shell Size
Class
Insert
Polarity
R0742 xx x xx P N
rms Series Designation
Shell Size
Class
Insert
Polarity
* 3 Serrations
* Full Serration
AMAX(2)
1.240MAX
.781/.761(.479MAX)
BTHREAD
CTHREAD
AMAX(2)
1.340MAX
.781/.761(.580MAX)
BTHREAD
CTHREAD
DTHREAD DTHREAD
SIZE “A” MAX (2) “B” THREAD CLASS 2A
“C” THREAD CLASS 2A
“D THREAD CLASS 2A
8 .980/.949 .5625-24UNEF .6250-25UN .5000-20UNF
10 1.104/1.073 .6875-24UNEF .7500-20UNEF .6250-24UNEF
12 1.291/1.260 .8750-20UNEF .9375-20UNEF .7500-20UNEF
14 1.391/1.360 .9375-20UNEF 1.0000-20UNEF .8750-20UNEF
16 1.516/1.485 1.0625-18UNEF 1.1250-18UNEF 1.0000-20UNEF
18 1.641/1.610 1.1875-18UNEF 1.2500-18UNEF 1.0625-18UNEF
20 1.766/1.735 1.3125-18UNEF 1.3750-18UNEF 1.1875-18UNEF
22 1.954/1.923 1.4375-18UNEF 1.5000-18UNEF 1.3125-18UNEF
24 2.079/2.084 1.5625-18UNEF 1.6250-18UNEF 1.4375-18UNEF
* Dimensions are in inches.
* Unless otherwise specified, tolerances shall be +/-.005 for three decimal places.
26
/86 Series III MIL - DTL - 83723/86 Series III
Connector Plug
Socket Contact Threaded Coupling
Class A, K, M, R, T, W, G, Z (3 Tab Serrations)
R0743 xx x xx S N
rms Series Designation
Shell Size
Class
Insert
Polarity
SIZE ”A” “B” THREAD CLASS 2A
8 .776 .5000-20UNF
10 .908 .6250-24UNEF
12 1.080 .7500-20UNEF
14 1.143 .8750-20UNEF
16 1.268 1.0000-20UNEF
18 1.377 1.0625-18UNEF
20 1.512 1.1875-18UNEF
22 1.627 1.3125-18UNEF
24 1.762 1.4375-18UNEF
28 2.175 1.3750-18UNS
* Dimensions are in inches.
* Unless otherwise specified, tolerances shall be +/-.005 for three decimal places.
* Size 28 rms part number only.
A
RMS
1.180MAX
.320MIN
BTHREAD
27
/87 Series III MIL - DTL - 83723/87 Series III
Connector Plug
Pin Contact Threaded Coupling
Class A, K, M, R, T, W, G, Z (3 Tab Serrations)
R0743 xx x xx P N
rms Series Designation
Shell Size
Class
Insert
Polarity
A
RMS
1.180MAX
.320MIN
BTHREAD
SIZE ”A” “B” THREAD CLASS 2A
8 .776 .5000-20UNF
10 .908 .6250-24UNEF
12 1.080 .7500-20UNEF
14 1.143 .8750-20UNEF
16 1.268 1.0000-20UNEF
18 1.377 1.0625-18UNEF
20 1.512 1.1875-18UNEF
22 1.627 1.3125-18UNEF
24 1.762 1.4375-18UNEF
28 2.175 1.3750-18UNS
* Dimensions are in inches.
* Unless otherwise specified, tolerances shall be +/-.005 for three decimal places.
* Size 28 rms part number only.
28
/91 Series III MIL - DTL - 83723/91 Series III
Connector Plug
Socket Contact Threaded Coupling
With RFI Spring
Class M, R, T, W, G, Z (3 Tab Serrations)
R0744 xx x xx S N
rms Series Designation
Shell Size
Class
Insert
Polarity
SIZE ”A” “B” THREAD CLASS 2A
8 .776 .5000-20UNF
10 .906 .6250-24UNEF
12 1.078 .7500-20UNEF
14 1.141 .8750-20UNEF
16 1.266 1.0000-20UNEF
18 1.375 1.0625-18UNEF
20 1.510 1.1875-18UNEF
22 1.625 1.3125-18UNEF
24 1.760 1.4375-18UNEF
28 2.175 1.7500-18UNS
* Dimensions are in inches.
* Unless otherwise specified, tolerances shall be +/-.005 for three decimal places.
* Size 28 rms part number only.
A
RMS
1.180MAX
.320MIN
RFISPRING
BTHREAD
29
/92 Series III MIL - DTL - 83723/92 Series III
Connector Plug
Pin Contact Threaded Coupling
With RFI Spring
Class R, W, G (3 Tab Serrations)
R0744 xx x xx P N
rms Series Designation
Shell Size
Class
Insert
Polarity
A
RMS
1.180MAX
.320MIN
RFISPRING
BTHREAD
SIZE ”A” “B” THREAD CLASS 2A
8 .776 .5000-20UNF
10 .906 .6250-24UNEF
12 1.078 .7500-20UNEF
14 1.141 .8750-20UNEF
16 1.266 1.0000-20UNEF
18 1.375 1.0625-18UNEF
20 1.510 1.1875-18UNEF
22 1.625 1.3125-18UNEF
24 1.760 1.4375-18UNEF
28 2.175 1.7500-18UNS
* Dimensions are in inches.
* Unless otherwise specified, tolerances shall be +/-.005 for three decimal places.
* Size 28 rms part number only.
30
/95 Series III MIL - DTL - 83723/95 Series III
Connector Plug
Socket Contact Threaded
Without RFI Spring Self-Locking
Class A, K, R, W, G (3 Tab Serrations)
R0736 xx x xx S N
rms Series Designation
Shell Size
Class
Insert
Polarity
SIZE ”A” “B” THREAD CLASS 2A
8 .832 .5000-20UNF
10 .959 .6250-24UNEF
12 1.097 .7500-20UNEF
14 1.236 .8750-20UNEF
16 1.360 1.0000-20UNEF
18 1.473 1.0625-18UNEF
20 1.586 1.1875-18UNEF
22 1.703 1.3125-18UNEF
24 1.846 1.4375-18UNEF
28 2.175 1.7500-18UNS
* Dimensions are in inches.
* Unless otherwise specified, tolerances shall be +/-.005 for three decimal places.
* Size 28 rms part number only.
A
RMS
1.180MAX
.320MIN
BTHREAD
31
/96 Series III MIL - DTL - 83723/96 Series III
Connector Plug
Pin Contact Threaded
Without RFI Spring Self-Locking
Class A, K, R, W, G (3 Tab Serrations)
R0736 xx x xx P N
rms Series Designation
Shell Size
Class
Insert
Polarity
A
RMS
1.180MAX
.320MIN
BTHREAD
SIZE ”A” “B” THREAD CLASS 2A
8 .832 .5000-20UNF
10 .959 .6250-24UNEF
12 1.097 .7500-20UNEF
14 1.236 .8750-20UNEF
16 1.360 1.0000-20UNEF
18 1.473 1.0625-18UNEF
20 1.586 1.1875-18UNEF
22 1.703 1.3125-18UNEF
24 1.846 1.4375-18UNEF
28 2.175 1.7500-18UNS
* Dimensions are in inches.
* Unless otherwise specified, tolerances shall be +/-.005 for three decimal places.
* Size 28 rms part number only.
32
/97 Series III MIL - DTL - 83723/97 Series III
Connector Plug
Socket Contact Threaded Coupling
Self-Locking With RFI Spring
Class N, S (Full Serrations)
R0736 xx x xx S N
rms Series Designation
Shell Size
Class
Insert
Polarity
SIZE “A” MAX “B” THREAD CLASS 2B
“C” THREAD CLASS 2A
8 .967 .5625-24UNEF .5000-20UNF
10 1.093 .6875-24UNEF .6250-24UNEF
12 1.170 .8750-20UNEF .7500-20UNEF
14 1.310 .9375-20UNEF .8750-20UNEF
16 1.500 1.0625-18UNEF 1.0000-20UNEF
18 1.562 1.1875-18UNEF 1.0625-18UNEF
20 1.710 1.3125-18UNEF 1.1875-18UNEF
22 1.812 1.4375-18UNEF 1.3125-18UNEF
24 1.948 1.5625-18UNEF 1.4375-18UNEF
28 2.175 1.8125-16UN 1.7500-18UNS
* Dimensions are in inches.
* Unless otherwise specified, tolerances shall be +/-.005 for three decimal places.
* Size 28 rms part number only.
RMS
1.280MAX
RFISPRING
CTHREAD
BTHREAD
.160/.010
AMAX
33
/98 Series III MIL - DTL - 83723/98 Series III
Connector Plug
Pin Contact Threaded Coupling
Self-Locking With RFI Spring
Class N, S (Full Serrations)
R0736 xx x xx P N
rms Series Designation
Shell Size
Class
Insert
Polarity
SIZE “A” MAX “B” THREAD CLASS 2B
“C” THREAD CLASS 2A
8 .967 .5625-24UNEF .5000-20UNF
10 1.093 .6875-24UNEF .6250-24UNEF
12 1.170 .8750-20UNEF .7500-20UNEF
14 1.310 .9375-20UNEF .8750-20UNEF
16 1.500 1.0625-18UNEF 1.0000-20UNEF
18 1.562 1.1875-18UNEF 1.0625-18UNEF
20 1.710 1.3125-18UNEF 1.1875-18UNEF
22 1.812 1.4375-18UNEF 1.3125-18UNEF
24 1.948 1.5625-18UNEF 1.4375-18UNEF
28 2.175 1.8125-16UN 1.7500-18UNS
* Dimensions are in inches.
* Unless otherwise specified, tolerances shall be +/-.005 for three decimal places.
* Size 28 rms part number only.
RMS
1.280MAX
RFISPRING
CTHREAD
BTHREAD
.160/.010
AMAX
34
Flange Mount or Single Hole MountReceptacles
Shell Polarity
PolarityFor Connectors
Size 8 and 10For Connectors Size
12, 14, 16, 18, 20, 22 and 24
A B C D A B C D
Normal 105˚ 140˚ 215˚ 265˚ 105˚ 140˚ 215˚ 265˚
6 102˚ 132˚ 248˚ 320˚ 18˚ 149˚ 192˚ 259˚
7 80˚ 118˚ 230˚ 312˚ 92˚ 152˚ 222˚ 342˚
8 35˚ 140˚ 205˚ 275˚ 84˚ 152˚ 204˚ 334˚
9 64˚ 155˚ 234˚ 304˚ 24˚ 135˚ 199˚ 240˚
10* 25˚ 115˚ 220˚ 270˚ 98˚ 152˚ 268˚ 338˚
* Not Available in Size 8 Connector
Shell Size
E ± .005
F ± .005
G Dia. /1 + .000 – .009
J Dia. Max .
K Dia. Max .
M Dia. Min.
N Dia. Min.
8 .812 .594 .125 .500 .561 .620 .510
10 .937 .719 .125 .620 .696 .748 .635
12 1.031 .812 .125 .750 .875 .913 .750
14 1.125 .906 .125 .871 .935 .980 .885
16 1.250 .969 .125 .996 1.062 1.107 1.010
18 1.343 1.062 .125 1.062 1.187 1.209 1.072
20 1.437 1.156 .125 1.184 1.312 1.337 1.192
22 1.562 1.250 .125 1.312 1.437 1.452 1.322
24 1.703 1.375 .154 1.432 1.562 1.577 1.442
1/ Unless Specified Otherwise by Part Number Configuration
DimensionsMaster Key
Panel Mounting for Standard FlangeHole Cut-out
The R0709 Series connectors are designed for termination to printed circuit boards, flex circuitry, or may be furnished with solder pin, wire wrap, compliant contact or solder pot contacts.
The gold plated contacts are designed for ease of maintenance with insertion and removal accomplished through the front side of the connector eliminating the requirement to disassemble the entire connector from its mounting. The mating interface is compatible with MIL-DTL-26500 and MIL-DTL-83723/75, /76, /77, and /78 Type B Connectors. There are several mounting Flange variations as well as contact termination lengths as shown in the following figures. Consult factory for availability.
Not Shown Actual Size
R0709 Series
35(Continued On Next Page)
Flange Mount or Single Hole MountReceptacles
Not Shown Actual Size
How to Orderrms Catalog NumberR0709 10 A 05 P N A 1 1 Termination Pin Length Solder Pin (Type A & D) Wire Wrap (B) Compliant Pin (0) Flange Options 1,2,5,6) (Flange Option 1) (Flange Option 0) 1-.255 ± .020 1 - .750 ± .020 1 - .323 ± .020 2-.935 ± .020 3-.526 ± .020 4-.365 ± .020 5-.965 ± .020 6-.396 ± .020 7-.436 ± .020 8-.978 ± .020 (No Solder Coat) 9-.557 ± .020 Mounting Flange Variation 0 - Square Flange Mount, Standard Thru Holes (4) 1 - Square Flange Mount, Standard Thru Holes (4) 2 - Square Flange Mount, Chamfered Thru Holes (4) 5 - Square Flange Mount, Standard Thru Holes (4), Flange Flush to Rear of Shell 6 - Square Flange Mount, ( .142)Thru Holes (4) Contact Type A - Solder Pin Termination B - Wire Wrap Termination C - Compliant Pin Termination with Solder Post D - Solder Pin Termination - No Solder Coat 0 - Compliant Pin Termination with Solder Post Shell Keyway Position N, 6, 7, 8, 9 or 10 Contact Style “P” - Pin Contact, “S” - Socket Contact Insert Arrangement Shell Finish A - Hard Anodized Aluminum Shell G - Cadmium over Nickel Plated Aluminum Shell with Clear Chromate Conversion N - Nickel Plated Aluminum Shell W - Cadmium over Nickel Plated Aluminum Shell with Olive Drab Chromate Conversion Shell Size 08, 10, 12, 14, 16, 18, 20, 22, 24 Series Designation “Connector, Receptacle, Flange Mount, Front Insert, Front Removable Contacts”
– Consult Factory for Other Options –
36
How to Orderrms Catalog NumberR0709 10 A 05 P N A 1 1 Termination Pin Length Solder Pin (A) Solder Pin (A) Compliant Pin (C) (Flange Options 4,7,8,9 and J) (Flange Option L) (Flange Option M) 1 -.255 ± .020 6 - .524 ± .020 1 - .241 ± .020 2 -.365 ± .020 3 -.526 ± .020 Solder Pin (A) Compliant Pin (C) 4 -.935 ± .020 (Flange Option N) (Flange Option N) 5 -.297 ± .020 1 - .217 ± .020 1 - .235 ± .020 6 -.524 ± .020 Solder Pin (D) (Flange Option J) 5 - .297 ± .020 Mounting Flange Variation 4 - Square Flange Mount, (.157 ± .005) Board Mounting Standoffs, .086-56UNC-2B Threaded Inserts in Mounting Holes (4) 7 - Square Flange Mount, (.225 ± .005) Board Mounting Standoffs, Threaded Inserts in Mounting Holes (4) 8 - Square Flange Mount, (.335 ± .005) Board Mounting Standoffs, Threaded Inserts in Mounting Holes (4) 9 - Square Flange Mount, (.200 ± .005) Board Mounting Standoffs, Threaded Inserts in Mounting Holes (4) J- Square Flange Mount, (.200 ± .005) Board Mounting Standoffs, .112-40UNC-2B Threaded Inserts in Mounting Holes (4) L - Square Flange Mount, (.500 ± .005) Board Mounting Standoffs, Threaded Inserts in Mounting Holes (4) M - Square Flange Mount, (.125 ± .005) Board Mounting Standoffs with Rear Flange Alignment Pin, Chamfered Thru Holes (4) N - Square Flange Mount, (.200 ± .005) Board Mounting Standoffs with Rear Flange Alignment Pin, .112-40UNC-2B Threaded Inserts in Mounting Holes (4) Contact Type A - Solder Pin Termination B - Wire Wrap Termination C - Compliant Pin Termination with Solder Post D - Solder Pin Termination - No Solder Coat 0 - Compliant Pin Termination with Solder Post Shell Keyway Position N, 6, 7, 8, 9 or 10 Contact Style “P” - Pin Contact, “S” - Socket Contact Insert Arrangement Shell Finish A - Hard Anodized Aluminum Shell G - Cadmium over Nickel Plated Aluminum Shell with Clear Chromate Conversion N - Nickel Plated Aluminum Shell W - Cadmium over Nickel Plated Aluminum Shell with Olive Drab Chromate Conversion Shell Size 08, 10, 12, 14, 16, 18, 20, 22, 24 Series Designation “Connector, Receptacle, Flange Mount, Front Insert, Front Removable Contacts”
– Consult Factory for Other Options –
Flange Mount Board Mounting StandoffsReceptacles
Not Shown Actual Size
Standoff with Threaded Insert (4)
Shell Size Thread Size
8 - 14 .086-56UNC-2B
16 - 24 .112-40UNC-2B
Unless Otherwise Specified in Table
R0709 Series Continued
37
Single Hole Mount Board Mounting StandoffsReceptacles
Not Shown Actual Size
How to Orderrms Catalog NumberR0709 10 A 05 P N A H 1 Termination Pin Length Solder Pin (A) Compliant Pin (C) (Flange Option E, H and K) (Flange Option H) 1 - .159 + .020 1 - .190 ± .020
Compliant Pin (C) Solder Pin (D) (Flange Option K) (Flange Option K) 1 - .173 ± .020 1 - .159 + .020 Mounting Flange Variation E - Square Flange, Single Hole Mount (.150 ± .005) Board Mounting Standoffs, (2) .112-40UNC-2B Threaded Inserts in Mounting Holes, (2) Thru Holes H - Square Flange, Single Hole Mount (.150 ± .005) Board Mounting Standoffs, (2) .112-40UNC-2B Threaded Inserts in Mounting Holes, (2) Thru Holes. Less Grounding Washer, Friction Washer, and Hexagon Nut K - Square Flange, Single Hole Mount - Less Thread (.200 ± .005) Board Mounting Standoffs, .112-40UNC-2B Threaded Inserts in Mounting Holes (4). Less Grounding Washer, Friction Washer and Hexagon Nut Contact Type A - Solder Pin Termination B - Wire Wrap Termination C - Compliant Pin Termination with Solder Post D - Solder Pin Termination - No Solder Coat 0 - Compliant Pin Termination with Solder Post Shell Keyway Position N, 6, 7, 8, 9 or 10 Contact Style “P” - Pin Contact, “S” - Socket Contact Insert Arrangement Shell Finish A - Hard Anodized Aluminum Shell G - Cadmium over Nickel Plated Aluminum Shell with Clear Chromate Conversion N - Nickel Plated Aluminum Shell W - Cadmium over Nickel Plated Aluminum Shell with Olive Drab Chromate Conversion Shell Size 08, 10, 12, 14, 16, 18, 20, 22, 24 Series Designation “Connector, Receptacle, Flange Mount, Front Insert, Front Removable Contacts”
– Consult Factory for Other Options –
38
Contacts/Tools Information MIL - DTL - 83723 Series III
Standard Crimp Contacts - Sockets Part Numbers/Color Bands
Contact Size
Socket MS Number
rms Part Number
Socket Color Bands
1st Band 2nd Band 3rd Band
20 MS39029/5-115 7260-20-2003 Brown Brown Green
16 MS39029/5-116 7260-16-1603 Brown Brown Blue
12 MS39029/5-118 7260-12-1203 Brown Brown Gray
Standard Crimp Contacts - Pins Part Numbers/Color Bands
Contact Size
Pin MS Number
rms Part Number
Pin Color Bands
1st Band 2nd Band 3rd Band
20 MS39029/4-110 7323-20-2003 Brown Brown Black
16 MS39029/4-111 7323-16-1603 Brown Brown Brown
12 MS39029/4-113 7323-12-1203 Brown Brown Orange
Standard Crimp Contact Rating
Contact Size Test Current StandardCrimp Contact
Well Diameter Min. Well Depth
20 7.5 .049 .157
16 13 .067 .250
12 23 .100 .250
Standard Sealing Plugs
Contact Size
Sealing Plug MS Number Inches Color
20 MS27488-20-2 3179-20-0001 Red
16 MS27488-16-2 3179-16-0001 Green
12 MS27488-12-2 3179-12-0001 Orange
Tools
Insertion/Removal Tool
MS Number rms Number Color
M81969/14-11 7269-20-0001 Red
M81969/14-03 7269-16-0001 Blue
M81969/14-04 7269-12-0001 Yellow
* Dimensions are in inches.
* Unless otherwise specified, tolerances shall be +/-.005 for three decimal places.
38
83723 - 2/25/2014
Military and Commercial Aviation Connectors for Demanding EnvironmentsThreaded and BayonetMIL - DTL - 83723 Series III
5121 Industry Drive Melbourne, FL 32940
321.757.6330 800.722.2233
info@introcorp.com Introcorp.com
top related