tom hanson las cruces, nm 88001 ph 845 901-1270 las …

�Pull ball ....................................................35.00

�Chamfer revolver cylinder ...................40.00

�Straight Flute rifle Bbl ........................195.00�Lap in bolt lugs

� Not including polish and blue ............75.00

�Safeties, installing

�Triggers, adjusting pull and travel .....35.00

�Welding on new bolt handle ................85.00

� Not including parts ...............................30.00 to 100.00

SHOTGUN WORK

� Non-plated bores, per barrel...............40.00

�Chamfer revolver barrel .......................40.00

� Does not include cost of barrel, action

� fitting new barrel ...................................55.00

HANDGUN WORK

�Forging bold handle ..............................65.00

�receiver ring ............................................45.00

�Install pre-threaded and chambered barrel

�Long forcing cone

�Make and install spring ......Hourly Rate

�Re-contour front or rear

� Plated bores, per barrel ........................50.00

�Re-Chamber Barrel…………………85.00

Thread muzzle end for device ..............85.00

� polish, or bluing ..................................150.00

�Triggers, installing

�� (Not including bluing)......................55.00

�Install barrel band swivel .....................40.00

Re-fit barrel to receiver ........................200.00 to 300.00

� Not including setting back barrel or

� Not including parts ...............................45.00 to 100.00

Re-solder rib (not including bluing) .100.00Raise dents in barrel................................65.00

Install Savage style barrel......................45.00

Re-solder forend lug

MUZZLE LOADER WORK

�Remove broken ramrod from Bbl ......35.00

� Not including parts) .............................75.00

Remove/modify hammer spur ..............30.00

HANDGUN WORK (continued)

Install crane lock......................................40.00

Re-barrel revolver (labor only).............70.00Straighten crane .......................................40.00

�Revolver action job (clean, smooth action

�Semi-auto action job (clean, smooth� action, not including parts) .................75.00

� 140 grit polish .....................................125.00

�

SERVICE CHARGES

CLEAN AND OIL CUSTOMER GUN

METAL FINISHING

�Hunter finish (pits and old finish removed.

� Bluing) ....................................................35.00

�Barreled action or barrel

�Wire wheel or matte finish.................125.00

�Per man & machine hour .....................60.00�Per man hour ...........................................50.00

�Minimum charge per gun .....................35.00

�Consists of completely stripping gun, �clean, check for wear, make suggestions �of services needed .................................50.00

Rust Blue

�Deluxe finish (same as above with a� 400 grit finish ......................................225.00

�(Customer polished) ..............................60.00

�Double barrel guns add ........................60.00

SIGHT WORK�Sight in customer gun (Does not include � cost of ammo, Targets, etc.). ..............60.00�Bore sighting...........................................20.00�Drill and tap barrel or receiver� Per hole ...................................................25.00

�Basket of parts (customer polished) ..60.00

�Cut dovetail in barrel ............................45.00�Install front sight ramp� Sweat-on type (may require re-

� Screw-on type (two hole)....................40.00

�Install insert in pistol sight...................40.00�Build up or construct extra high

� Plug hole and re drill and tap for

� Band type................................................50.00

Install front or mid rib bead on front sight .................................................40.00

shotgun.......................................................25.00

� bead..........................................................40.00�Install receiver sight� Drilled and taped...................................20.00

� Screw-on type (one hole) ....................25.00

�Cost of liner or bluing) .........................80.00

� Gun drilled and tapped ........................30.00

Check firing pin protrusion ...................10.00

�Remove fouling from barrel...time & material

�Cut and crown barrel

�Make chamber cast ................................30.00�Remove fired case from chamber.......25.00

�Remove obstruction from bore ...........25.00

� Rifles and shotgun ................................60.00� Handguns ................................................60.00�Chamber and fit barrel to action

� Not drilled and tapped (see per hole

GENERAL BARREL, ACTION & RIFLE WORK�Test fire customer gun

� Price above) .........................................100.00

� (Does not include cost of ammo) ......25.00

�Scope mounting

�Check head space...................................20.00

�Remove live round from chamber .....50.00

Lap barrel ..................................................50.00�Straighten/adjust barrel.........................50.00�Install liner in barrel (does not include

Tom Hanson Ph 845 901-1270

Las Cruces Gunsmith

Las Cruces, NM 88001

Tom Hanson Las Cruces Gunsmith

Las Cruces, NM 88001Ph 845 901-1270

�Tighten slide of 1911 auto ...................75.00�Lighten 1911 trigger..............................80.00

�Fit barrel to 1911 auto (not including Bbl)

� Ramped barrel .....................................100.00

�Bevel magazine well on 1911 auto ....30.00�Checker front of frame on 1911 ......125.00�Stipple front of frame on 1911 ............60.00�Open and modify ejection port on 1911

�Fit new trigger to 1911 (not including

�Fit and install Bbl bushing on 1911 ...40.00

� Auto slide................................................40.00�Throat, polish feed ramp of 1911 .......45.00

� Cost of trigger) ......................................50.00

� Non-ramped barrel ...............................60.00

�Fit custom hammer to 1911 (does not� Include cost of hammer) .....................70.00

� Unfilled oil or lacquer finish on

�Glass bedding barrel & action

� Pillar bed ..............................................120.00

�� Drill stock & install ..........................65.00

STOCK WORK

�Install recoil pad (labor only) ..............40.00

� (Does not include cost of parts

� Average stock ......................................125.00� On complicated stock ........................165.00

� Match rifles, M-1 Garand etc. ............80.00

�Install stock cross bolt ..........................40.00

�� Simple installation in butt stock.....35.00

�Wood finishing

� Average stock ......................................165.00

�Hunter finish

�Spray finish� Lacquer or polyurethane .....................85.00

�� Hydraulic style.................................100.00�Install auto pistol compensator .........100.00

�Install sling swivels (wood screw) .....30.00

� or refinishing) ........................................85.00

� On complicated stock ........................200.00

�Install sling swivel (double bbl) .........45.00

�Modify 1911 frame for beavertail safety

�Gunsmith finish� Filled oil or lacquer finish on

� Hunting rifle ...........................................75.00

�Install Recoil Reducer

�Inletting of semi-finished stock

�� Recoil pad, etc .................................250.00��

�� Does not include buttplate, grip cap,