trico-ram - asi-team.com

Features:• Threeindependentlyspeedcontrolledpistonsextrudefluidswithinaspeedrange

from0.00005–40mm/sec.

• 200mlreservoirsinallthreebarrelsprovidesamplevolumeforbatchextrusionprocesses

• Duetoindependentpistondrivecontrol,differentproductlevelsinallthreebarrelscan

bemaintained

• Extrusionprocessismonitoredandcontrolledbythreeextrusionpressuretransducers,threefluid

temperaturesensorsandappliedtriplepistonforcecontrolupto40kN

• Temperaturecontrolbetween30°C–250°C

• DesignapprovedtocleanroomconditionaccordingtoclassA

TRICO-Ram

TRICO-Ram The Three Components Batch Extrusion Process

Contact:

Germany:GÖTTFERTWerkstoff–PrüfmaschinenGmbHSiemensstraße2Postfach1261D74722Buchen/Odenwald

Fon:+496281/4080Fax: +496281/408-18Email:info@goettfert.dewww.goettfert.de

USA, Mexico, Canada :GOETTFERTInc.488LakeshoreParkwayRockhill,SC29730

Fon:+1803/324-3883Fax: +1803/324-3993Email:info@goettfert.comwww.goettfert.com

Photo (left) and schematic (right) of the TRICO-Ram Tripple Barrel System.

Why using a Ram Extruder instead of continuous working screw extruder?

A Ram Extruder uses the platform of a capillary rheometer, a well proven testing instrument in the polymer industry.

• Highprecisiontemperaturecontrolguarantiesstableconditionwithinthereservoir

• Theheatingprocessinthereservoirisverygentle,comparedtoundefinedmixinginacontinuous

extruderwhichmightleadtounwantedshearheating.

• Thelinearspeeddrivenramguarantiesaconstantandstablediameteroftheextrudate,whichcan

notbereachedwiththepulsatingflowinascrewdrivenextruder

• Thebatchprocessofaramextruderguarantiesminimumoffspecmaterial

• Forhighcostproducts,quantitiescanbereducedtolessthan100mlperextrusionscycle

TRICO-Ram The Three Components Batch Extrusion Process