tri*core - pipe supports systems-aaa technology ...s standardization society mss sp-69 h....
Post on 12-May-2018
219 Views
Preview:
TRANSCRIPT
SINGLE INTERNAL/EXTERNAL OR
TRI*CORE™
"PATENT PENDING"
DOUBLE-WALLED COMPOSITE INSULATION
Since 1971
Celerating 39 Years of Service to Industry
AAA TECHNOLOGY & SPECIALTIES CO., INC
AAA TECHNOLOGY & SPECIALTIES CO., INC
DOUBLE-WALLED COMPOSITE INSULATION
Introduction to TRI*CORE™
TRI*CORE™ is another premier Composite Insulation Shield exclusive from AAA TECHNOLGY & SPECIALTIES CO., INC. This product designed as a composite reinforced material can be up to 40 times stiffer and at least 10 times stronger than Polyurethane Insulation alone, depending on thickness and selected densities. It is used for areas that will be exposed to rubbing, vibration or small impact loadings while dramatically increasing strength. It replaces the need for a vapor barriers , internal shieldings and the use of mastics.
TRI*CORE™ acts as a second skin protection, reinforcing the contact surface. The Fiberglass reinforced materials bonded to the Polyurethane Foam core acts as a continuous multi-directional "I-Beam", which is proportionally stronger and stiffer depending on the thickness and density of the insulation.
Made from molded Fiberglass reinforced Vinyl Ester and Epoxy resins bonded to Polyurethane Foam, TRI*CORE™Insulation provides a non-conductive surface that enhances the compressive strength of the Polyurethane. It further can be glued directly to the pipe using epoxy adhesives. Being non-metallic this product not only insulates but also prevents surface induced corrosion by keeping out moisture while also isolating from electrical continuity and has a superior chemical resistance.
Our TRI*CORE™ Pipe Supports insulates from induced electrical currents that may filter from the ground acting as a barrier that can cause localized corrosion to your pipeline while also inhibiting electrical shock. It further is lighter and more transportable, speeding up installations and reducing transportation costs. These combined materials provide greater bearing strengths while at the same time acting as a corrosion, electrical and insulation barrier.
TRI*CORE™ is available as an Internal/External or Double-Walled Composite Polyurethane sandwiched material.When used as a single composite over/under the Polyurethane Insulation the contact surface acts as a wear pad, capable of handling some friction and protecting the foam component internally or externally, while adding additional strength as a "T-Beam". The double-walled version protects the insulation both internally and externally and acts as a continuous "I -Beam", for enhanced strength and rigidity.
Light Duty TRI*CORE™ composites insulation is typically used with a single composite internal or external pad bonded to the Polyurethane which is made of 2 lb/in² to 6 lb/in² density insulation. UV mastic coating can be added to any exposed surfaces.
Medium Duty TRI*CORE™ composites is used with a medium density foam of 8 lb/in² to 12 lb/in² with either an internal or external composite surface. In medium duty applications, double-walled surfaces can be added for internal and external support where enhanced strength characteristics where needed.
Heavy Duty TRI*CORE™ composites is used with 12 lb/in² to 20 lb/in² density foam with either an internal or external
composite surface. The composite component can also be thicker to increase strength and is used preferably for heavy load applications as double-walled high density Polyurethane foam core.
TRI*CORE™ Pipe supports can be used with our standard galvanized or painted steel pipe supports or our exclusive TRI*COMPOSITE™ Pipe Supports, please refer to our Composite Catalog for additional details. Our Pipe Supports are optionally available with our TRI*SLIDE™ Low Friction Slide Bearings that allow axial movement that can be guided or directionally constrained. Please refer to our TRI*SLIDE™ catalog for types, capacities and sizing for your slide bearing needs. These are stainless over stainless or PTFE over stainless and even Graphite over stainless as described in our TRI*SLIDE™ guides.
AAA TECHNOLOGY AND SPECIALTIES CO., INC.
3, 4, 5
…....6
…....7
…....8
…....9
…..10
…..11
…..12
13, 14
…..15
…..16
…..17
…..18
…..19
…..20
…..21
…..22
…..23
…..24
…..25
…..26
.….27
Single Outer Reinforced Insulation……………………………...………….…………………….……………………………………………………….…
DWP - 360………………………………………………………………………………………...………………………………………
SWP - 180MS…………………………………………………………………………………….……...…………………………..
DWP - 180MS………………………………………………………………………………………………..…………………………………………………………
Double-Walled Reinforced Insualtion……………………………...………….…………………….……………………………………………………….…
Shoe Support Type………………………………………………………………………………...…………………………………….…
Graphical Selection Guide ………………………………………………………………...…………………………………….…
SWP - 360………………………………………………………………………………………….….…………………………………
SWP - 180…………………………………………………………………………….………………………………….…………….…
DWP - 180………………………………………………………………………………………..…………………………………………
SWP - 360BC……………………………………………………………………………………………….…..……………………………………
1
DWP - 360BC………………………………………………………………………………………………….…………….…………………………………………
SWP - 180MS - FB………………………………………………………………………………………………….….……………….
DWP - 180MS - FB………………………………………………………………………………………………...……………………………………………………………
DWP - 360BC- FB…………………………………………………………………………………………………..……………………………………………………………
SWP - 360BC - DW……………………………………………………….…………………………………..………………………………..
SWP - 360BC - FB………………………………………………………………………………………….………….…………………………………
Correspondence………………………………………………………..………………….………………………………………….…
Model Numbers and Description………………………………………….……………………………………………………….…
TABLE OF CONTENTS
Shipping & Handling……………………………………………………………..………………………………………………….…
Polyurethane Properties…………………………………………………………...…………………………………………………
Testing and Scope of Work………………………………………..………………………...…………………………………………………….…
AAA TECHNOLOGY AND SPECIALTIES CO., INC.
28
SWP - 360BC - DW - GC………………………………………………………………………………………………………………………………………29
DWP - 360BC - DW - GC………………………………………………………………………………………...………………………………………………………………..30
SWP - 360BC - DW - BG…………………………………………………………………………………………...…………………..31
DWP - 360BC - DW - BG……………………………………………………………………………………………….………………………32
SWP - 360BC - DW - AG……………………………………………………………………………………………...……………………………………………………….33
DWP - 360BC - DW - AG……………………………………………………………………………………………….……………………………………………………34
SWP - 360BC - DW - ST ……………………………………………………………………………………………..…………………………………………….35
DWP - 360BC - DW - ST…………………………………………………………………………………………..…………………………..36
SWP - 360BC - DW - ST & AG………………………………………………………………………………...………………………..37
DWP - 360BC - DW - ST & AG………………………………………………………………………………….……………………….38
SWP -180 - HCV………………………………………………………………………………………………...………………………39
DWP - 180 - HCV…………………………………………………………………………………………………….…………………..40
SWP - 360 - HC……………………………………………………………………………………….…………………………………41
DWP - 360 - HC…………………………………………………………………………………………….…………………………….42
SWP - 90 - FS………………………………………………………………………………………………...…………………………….43
DWP - 90 - FS……………………………………………………………………………………………….………………………….44
SWP - 180 - FS……………………………………………………………………………………………..…………………………45
DWP - 180 - FS……………………………………………………………………………………………...…………………………46
SWP - 360 - FS………………………………………………………………..……………………..………………………………. 47
DWP - 360 - FS………………………………………………………………………..……………………….……………………. 48
2
TABLE OF CONTENTS
DWP - 360BC - DW………………………………………………………………………………...…………………………………………………
AAA TECHNOLOGY AND SPECIALTIES CO., INC.
AAA TECHNOLOGY AND SPECIALTIES CO., INC.
TRI*CORE™ High Density Polyurethane Pipe SupportsFor Low Temperature Applications
This specification has been prepared to set forth the requirements for the design, the manufacturing, the proper selection and the use of low temperature, load bearing, insulated pipe supports. This specification covers low temperature, load bearing, insulated pipe supports for use with piping systems operating at temperatures between -425° F (-254° C) to 275° F (135° C).
General Requirements1. All low temperature, insulated piping shall be supported using insulated pipe supports.
2. All insulated pipe supports shall comply with the latest editions of the following piping codes andManufacturer'sStandards:
a. ANSI/ASME B31.1 Power Piping Codeb. ANSI/ASME B31.3 Refinery and Chemical Plant Piping Codec. ANSI/ASME B31.4 Liquid Petroleum Piping Coded. ANSI/ASME B31.5 Refrigeration Piping Codee. ANSI/ASME B31.8 Gas Transmission and Distribution Piping Codef. Manufacturer's Standardization Society MSS SP-58g. Manufacturer's Standardization Society MSS SP-69h. Manufacturer's Standardization Society MSS SP-89i. Federal Specification WW-H-171D
3. The selection of all low temperature, load bearing, insulated pipe supports shall be based upon the following considerations:
a. Maximum design loads that will be applied to the pipe support along the vertical, axial and lateralaxes from the primary and secondary loadings.
b. Maximum test loads that will be applied to the pipe support along the vertical, axial, lateral axes. c. Maximum design load that may be applied to the pipe support along the vertical, axial and lateral
axes from occasional loading such as water hammer, seismic or impact type loads. d. Maximum deflection and rotations along the vertical, axial and lateral axes that are expected to
occur and in what condition – normal operating, testing, upset, seismic, water hammer, etc. e. Lowest possible temperature expected to occur in the piping system.f. Highest possible temperature expected to occur in the piping system.g. Highest and lowest possible ambient temperature expected to be experienced. h. Any dimensional clearances that may require during installation, testing or operating piping system.i. Any localized welds or lug that is to be covered properly by low temperature, load bearing.
3
TRI*CORE™ High Density Polyurethane Pipe Supports
For Low Temperature Applications
AAA TECHNOLOGY AND SPECIALTIES CO., INC.
4. At the request of the Owner, design calculations and supporting data shall be made available.
5. At the request of the Owner, piping stress analysis calculations shall be made available as well as Calculations indicating the stresses in the pipe wall at any attachment/lug juncture.
6. At the request of the Owner, material test reports or certified mill test reports may be requested.
TRI*FOAM High Density Polyurethane Properties
1. High density polyurethane shall have the following properties:a. 6lb/ft³ foam
i. Thermal Conductivity = .16 BTU-in/ft³ - hr – deg F (Imperial), 0.024 W/meter*K (SI)ii. Thermal Resistance = 6.3 hr – deg F - ft³ / BTU (Imperial), 1.11 m² - K/W (SI)iii. Density = 6 lbs/ft³ (Imperial), 96.111 Kg/M³ (SI) (+/- 15%)iv. Ninety-five percent of the cells are closedv. Water absorption = .05 lbs/ft³ (Imperial), 4.8055 Kg/m³
b. 10lb/ft³ foami. Thermal Conductivity = .17 BTU-in/ft³ - hr – deg F (Imperial), 0.024 W/meter*K (SI)ii. Thermal Resistance = 5.9 hr – deg F - ft³ / BTU (Imperial), 1.04 m² - K/W (SI)iii. Density = 10 lbs/ft³ (Imperial), 160.185 Kg/M³ (SI) (+/- 15%)iv. Ninety-five percent of the cells are closedv. Water absorption = .05 lbs/ft³ (Imperial), 4.8055 Kg/m³
c. 15lb/ft³ foami. Thermal Conductivity = .19 BTU-in/ft³ - hr – deg F (Imperial), 0.027 W/meter*K (SI)ii. Thermal Resistance = 5.3 hr – deg F - ft³ / BTU (Imperial), 0.901 m² - K/W (SI)iii. Density = 15 lbs/ft³ (Imperial), 240.277 Kg/M³ (SI) (+/- 15%)iv. Ninety-five percent of the cells are closedv. Water absorption = .05 lbs/ft³ (Imperial), 4.8055 Kg/m³
d. 20lb/ft³ foami. Thermal Conductivity = .25 BTU-in/ft³ - hr – deg F (Imperial), 0.035 W/meter*K (SI)ii. Thermal Resistance = 4.2 hr – deg F - ft³ / BTU (Imperial), 0.714 m² - K/W (SI)iii. Density = 20 lbs/ft³ (Imperial), 320.369 Kg/M³ (SI) (+/- 15%)iv. Ninety-five percent of the cells are closedv. Water absorption = .05 lbs/ft³ (Imperial), 4.8055 Kg/m³
2. No CFC's shall be used in the fabrication process and no CFC's shall be contained in the high densitypolyurethane pipe supports to be supplied.
4
TRI*CORE™ High Density Polyurethane Pipe Supports
For Low Temperature Applications
AAA TECHNOLOGY AND SPECIALTIES CO., INC.
TRI*FOAM High Density Polyurethane Saddle Properties
1. The high density polyurethane saddle shall have the following properties:a. The insulation I.D. and the O.D. dimensions shall be manufactured in accordance with the ASTM
Specification C 585 unless otherwise specified.b. The saddle shall be provided fully assembled with sufficient high density polyurethane insulation
extending beyond the support outer metal jacket in order to enable the insulator to make standard butt joints.
c. The exposed polyurethane surfaces shall be coated with mastic to protect the foam from ultraviolet light degradation and moisture. Mastic used shall have a minimum perm rating of.02 in accordance with ASTM E-96.
d. A vapor barrier shall be provided between the jacket and the high density polyurethane insulation with amaximum perm rating of .02.
e. The high density polyurethane pipe support assembly shall be designed to provide for a sufficient clamping force on the pipe to assure that the pipe support assembly will move axially with the pipe. The axial loading conditions shall not exceed the design loads for which the pipe support assembly has been designed.
TRI*FOAM Saddle Properties- Others
1. The saddle shall have the following properties for components other than the Polyurethane Saddle:a. All structural shapes and plate shall be of ASTM A-36, unless otherwise specified.b. All bolts/studs greater than ¼" in diameter shall be of ASTM A-193, Grade B7, unless otherwise specified.c. All bolts and nuts less or equal to ¼" in diameter shall be ASTM A-307, unless otherwise specified.d. All Nuts greater than ¼" in diameter shall be ASTM A-194, Grade B7, unless otherwise specified.e. All high density polyurethane pipe support assemblies selected with a low friction slide plate assembly
shall have two slide plate surfaces at each support point. Each slide plate assembly shall consist of a mating slide plates as follows:
i. Top - 3/32" thick glass filled reinforced PTFE bonded to a 10 ga. Carbon steel backing plate; Bottom - 3/32" thick glass filled reinforced PTFE bonded to a 10 ga. Carbon steel backing plate.
ii. Top - 1/16" thick stainless steel plate welded to 10 ga. Carbon steel backing plate;Bottom - 3/32" thick glass filled reinforced PTFE bonded to a 10 ga. Carbon steel backing plate.
iii. Top - 1/16" thick stainless steel plate welded to 10 ga. Carbon steel backing plate; Bottom - ¼" thick polyurethane slide bearing box restrained on a 10 ga. Carbon steel backing plate.
iv. For slide bearing assembly details, see the TRI*SLIDE™ literature published by AAA Technology and Specialties Co., Inc.
5
TRI*CORE™ High Density Polyurethane Pipe Supports
For Low Temperature Applications
AAA TECHNOLOGY AND SPECIALTIES CO., INC.
Testing Standards for TRI*FOAM High Density Polyurethane Saddle
1. At the request of the owner, supplier shall provide compressive strength and thermal testing results of high densitypolyurethane saddles conducted by an independent testing laboratory in accordance to MSS SP-89. Testing of high density polyurethane samples shall take place at a temperature of -250° F (-156° C).
2. All tests performed to determine the load bearing capabilities of high density polyurethane saddles shall be conducted in accordance with ASTM D16221, Standard Test Method for Compressive Properties of Rigid Cellular Plastics.
3. A safety factor of 5.0 shall be used in determining maximum loads to be resisted by the high density polyurethane pipe supports at the design temperature.
4. All tests performed to determine the thermal conductivity of high density polyurethane saddles shall be conducted in accordance with ASTM C 177-85, Steady State Heat Flux Measurements and Thermal Transmission Properties by means of the Guarded Hot Plate Apparatus.
Scope of Work
1. All high density polyurethane pipe support assemblies shall include:a. The high density polyurethane saddle(s),b. The vapor barrier,c. The metal jacket,d. The fabricated steel casing,e. The low friction slide bearings, if specified by owner,f. The guide and line stops, if specified by owner,g. Tagging, andh. Any associated pipe hanger hardware or structural members, if specified by owner.
2. All pipes are the responsibility of the purchaser.3. All non-load bearing insulation is not the responsibility of the purchaser.4. All items not clearly identified as being required from the pipe support manufacturer shall be the
responsibility of the purchaser.
6
TRI*CORE™ High Density Polyurethane Pipe Supports
For Low Temperature Applications
AAA TECHNOLOGY AND SPECIALTIES CO., INC.
Shipping and Handling
1. Each high density polyurethane pipe support assembly shall be clearly and permanently marked with the support Identification number as specified by the owner. The marking shall be permanent in nature and shall withstand water and fading when exposed to sunlight for a minimum period of five (5) years.
2. The mark shall be placed on the high density polyurethane pipe support assembly in a location that is visible and readable to an observer from ten (10) feet away from the pipe support assembly.
3. Each high density polyurethane pipe support shall be shipped on a pallet with reinforced cardboard protection for all exposed polyurethane surfaces or in a reinforced cardboard box strong enough to prevent damage while assembly is in transit. Care shall be taken when packaging the high density polyurethane pipe support assemblies so that damage shall not occur when individual pipe support assemblies shift during shipment. All high density polyurethane pipes support assemblies shall be individually wrapped in plastic.
4. Each container shall be clearly marked with a unique number and each container shall have an individual packing list in the container as well as attached to the outside of the container.
5. Prior to installation in the Owner's plant, the high density polyurethane pipe support assemblies shall be stored in a dry covered area to avoid exposure to rain, moisture and sunlight.
6. At the time of the shipment, the supplier shall furnish installation instructions necessary for the proper installation of each style of high density polyurethane pipe support assemblies being provided.
Quotations
1. All quotations for the pipe supports defined herein shall be submitted to __________________.2. All quotations for the pipe supports defined herein shall be for all components defined herein. In the event
that you wish to submit a quotation for an alternate item, you must first define your price for the item and then define your alternate, its costs and the advantage of your alternate offers.
3. The manufacturer of all pipe supports defined herein shall be AAA Technology and Specialties Co., Inc., 6219Brittmoore Road, Houston, Texas 77041-5114 or an approved equal. AAA Technology may be contacted by E-mail at info@aaatech.com or by telephone at (713) 849-3366 or by Fax at (713) 849-3654.
4. All quotations must include unit and extended pricing for each pipe support assembly. In addition, a total price for all items proposed are to be supplied.
7
TRI*CORE™ High Density Polyurethane Pipe Supports
For Low Temperature Applications
AAA TECHNOLOGY AND SPECIALTIES CO., INC.
Correspondence
1. All correspondence, drawings and other data must have the inquiry number or the order number marked on it prominently.
2. All correspondence relating to the design or any engineering data for the pipe supports covered under this inquiry shall be sent to: _______________________________.
3. All correspondence relating to any shipping information including weights and dimensions, and changes orders or specification not covered by formal Change Order to the Purchase Order shall be sentto: __________________________________.
Delivery
1. All pipe supports are to be delivered to the job site by _____________________.
2. The job site is located at: _______________________________.
8
9
AAA TECHNOLOGY AND SPECIALTIES CO., INC.
Model Numbers and Description
TRI*CORE Reinforced Polyurethane Pipe Supports
Cold Shoe are Code with Type , Size, Dimension and Material as Follow:
Example:
3" - SWP360BC - 4"x 12" - DW/S1/GP - 6"Ins. - AG/HD
Mean Single Wear Pad360° and Type Saddle
BOP and Length
Support and Duty TYPEPipe Size
Insulation Thick
Pipe Shoe TypeSlot Option and Gusset Plate
Model Numbers and Description of Code
Type Description of Supprot
FB Flat Bottom
BG Beam Guide
CG Clip Guide
AG Angle Guide
ST Line Stop
AG& ST Angle Guide & Line Stop
Type Description of Pipe Shoe
T Tee
DW Double Web
Type Description of Slot Option
S1 Expansion Slot
S2 Insulation Band Slot
S3 Expanison Slot & Insulation Band Slot
FS Foam Support
GP Gusset Plate
RIB Rib Plate
Type Description of Saddle
HC Hanger Clamp
HDC Hold Down CLamp
HCV Hanger Clevis
BC Body Clamp
MS Metal Saddle
10
AAA TECHNOLOGY AND SPECIALTIES CO., INC.
INSULATION
Detail of 180 deg. and 360 deg.
TRI*CORE™ Reinforced Polyurethane Pipe Supports
180 degree one layerIf Insulation is thicker
than 3", two layers shall
be used.
WEAR PAD.WEAR PADINSULATION
INSULATION
Detail of one layer with saddle Detail of two layer with Saddle
SINGLE WEAR PAD
180 degree one layer
180 degree double layer
180 degree double layer
1" TYP.
2" TYP.
11
AAA TECHNOLOGY AND SPECIALTIES CO., INC.
INSULATION
Detail of 180 deg. and 360 deg.
TRI*CORE™ Reinforced Polyurethane Pipe Supports
180 degree one layerIf Insulation is thicker
than 3", two layers
shall be used.
WEAR PAD.WEAR PADINSULATION
INSULATION
Detail of one layer with saddle Detail of two layer with Saddle
DOUBLE WEAR PAD
180 degree one layer
180 degree double layer
180 degree double layer
WEAR PAD.
1" TYP.
2" TYP.
WEAR PAD.
Slot Option Detail
TRI*CORE High Density Pipe Shoe Support
TYPE S1 TYPE S2
12
Expansion Slot Insulation Band Slot
Insulation Band & Expansion Slot Gusset Plate
TYPE S3 TYPE GP
AAA TECHNOLOGY AND SPECIALTIES CO., INC.
SWP - 360BC - DW - GC DWP - 360BC- DW- GC
SWP - 360 DWP - 360
SWP - 180MS
SWP -180 DWP - 180
DWP - 180MS DWP - 360BCSWP - 360BC
PAGE 15 PAGE 16
SWP - 180MS - FB DWP - 180MS - FB SWP - 360BC - FB DWP - 360BC - FB
SWP - 360BC - DW DWP - 360BC - DW
PAGE 23 PAGE 24 PAGE 25 PAGE 26
PAGE 31 PAGE 32
DWP - 360BC - DW - BGSWP - 360BC - DW - BG
PAGE 27 PAGE 28
PAGE 17 PAGE 18
PAGE 10 PAGE 20 PAGE 21 PAGE 22
PAGE 29 PAGE 30
PAGE 33 PAGE 34
DWP - 360BC- DW- AGSWP - 360BC - DW - AG
13
AAA TECHNOLOGY AND SPECIALTIES CO., INC.
SWP - 360BC - DW - ST DWP - 360BC - DW - ST DWP - 360BC - DW - ST & AG
PAGE 48
DWP - 360 - FS
PAGE 38
PAGE 45 PAGE 46
DWP - 360 - HCSWP - 360 - HC
PAGE 39
SWP - 90 - FS DWP - 90 - FS
SWP - 360 - FS
14
PAGE 43 PAGE 44
PAGE 47
PAGE 35 PAGE 36
SWP - 180 - HCV DWP - 180 - HCV
SWP - 360BC - DW - ST & AG
PAGE 37
DWP - 180 - FS
PAGE 41 PAGE 42PAGE 40
SWP - 180 - FS
AAA TECHNOLOGY AND SPECIALTIES CO., INC.
Features:* Temperature Range : -425 Degree * Exposted Polyurethane Surface are coated with
* (-254 Degrees C ) to 275 Degrees F (135 Degrees C) Monolar Mastic.
* Light or Medium Load Capacity * Support Saddles are constructed in accordance
* Design Load are Based on a Safety Factor of 5 with the MSS - SP58 and the ASME B31 Piping
* Steel Surface Finish : Hot Dip Galvanized or painted Code Requirements.
* Support Saddle are constructed on High Density * Technical Specification: AAAT - CS - 2010
Polyurethane with Fiberglass Reinforced Composite. * For Unique Applications, Contact AAA Tech.
* Support Saddle restrains - Y movement.
SWP - 180
15
AAA TECHNOLOGY AND SPECIALTIES CO., INC.
"F"
INS. THK.
O.D.
SINGLE WEAR PAD.
INSULATION1" TYP.
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
3/8"
3/8"
INSULATION THICKNESS
PIPESIZE
VERTICAL LOAD ( lbs)
PADTHK.
1 / 2 "
F O.D.
3 / 4 "
F O.D.
1 "
F O.D.
1-1 / 2 "
F O.D.
2 "
F O.D.
2-1 / 2 "
F O.D.
3 "
F O.D.
3-1 / 2 "
F O.D.
4 "
F O.D.
LIGHTDUTY
925
975
1040
1160
55
85
105
155
185
225
275
345
415
530
610
690
775
845
885
114"
1"
34"
12" 12 2
2
238"
24
18
112"
2"
212"
3"
312"
4"
5"
6"
8"
10"
12"
14"
16"
18"
20"
24"
775
835
925
45
65
85
120
155
185
215
275
335
435
495
555
615
675
700
750
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
1818181818 18
18 18 18 18 18 18 18
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
238"
278"
312"
4"
412"
5"
5 916"
238"
278"
278"
312"
312"
4"
412"
5"
5 916"
658"
278"
278"
312"
312"
4"
412"
5"
658"
658"
512"
758"
858"
4"
412"
4"
5"
5"
5 916"
658"
658"
758"
758"
858"
958"
27"
23"
21"
19"
17"
16"
14"
1134"
5"
5"
5 916"
5 916"
658"
658"
758"
758"
858"
858"
958"
1034"
1234"
17"
15"
18"
20"
22"
24"
28"
658"
658"
658"
658"
758"
758"
858"
858"
958"
958"
1034"
1134"
16"
14"
18"
19"
23"
21"
25"
29"
758"
758"
758"
758"
858"
858"
958"
958"
1034"
1034"
1134"
1234"
17"
15"
19"
20"
22"
24"
26"
30"
858"
858"
858"
858"
958"
958"
958"
958"
958"
958"
1034"
1034"
1034"
1034"
1134"
1134"
1134"
1134"
1234"
1234"
1234"
14"
14"
16"
15"
18"
20"
21"
23"
25"
27"
31" 32"
28"
26"
24"
22"
21"
17"
19"
MEDIUMDUTY
35 45
Features:* Temperature Range : -425 Degree * Exposted Polyurethane Surface are coated with
* (-254 Degrees C ) to 275 Degrees F (135 Degrees C) Monolar Mastic.
* Light or Medium Load Capacity * Support Saddles are constructed in accordance
* Design Load are Based on a Safety Factor of 5 with the MSS - SP58 and the ASME B31 Piping
* Steel Surface Finish : Hot Dip Galvanized or painted Code Requirements.
* Support Saddle are constructed on High Density * Technical Specification: AAAT - CS - 2010
Polyurethane with Fiberglass Reinforced Composite. * For Unique Applications, Contact AAA Tech.
* Support Saddle restrains - Y movement.
DWP - 180
16
AAA TECHNOLOGY AND SPECIALTIES CO., INC.
"F"
INS. THK.
O.D.
DOUBLE WEAR PAD
INSULATION1" TYP.
DOUBLE WEAR PAD
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
3/8"
3/8"
INSULATION THICKNESS
PIPESIZE
VERTICAL LOAD ( lbs)
PADTHK.
1 / 2 "
F O.D.
3 / 4 "
F O.D.
1 "
F O.D.
1-1 / 2 "
F O.D.
2 "
F O.D.
2-1 / 2 "
F O.D.
3 "
F O.D.
3-1 / 2 "
F O.D.
4 "
F O.D.
LIGHTDUTY
925
975
1040
1160
55
85
105
155
185
225
275
345
415
530
610
690
775
845
885
114"
1"
34"
12" 12 2
2
238"
24
18
112"
2"
212"
3"
312"
4"
5"
6"
8"
10"
12"
14"
16"
18"
20"
24"
775
835
925
45
65
85
120
155
185
215
275
335
435
495
555
615
675
700
750
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
1818181818 18
18 18 18 18 18 18 18
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
238"
278"
312"
4"
412"
5"
5 916"
238"
278"
278"
312"
312"
4"
412"
5"
5 916"
658"
278"
278"
312"
312"
4"
412"
5"
658"
658"
512"
758"
858"
4"
412"
4"
5"
5"
5 916"
658"
658"
758"
758"
858"
958"
27"
23"
21"
19"
17"
16"
14"
1134"
5"
5"
5 916"
5 916"
658"
658"
758"
758"
858"
858"
958"
1034"
1234"
17"
15"
18"
20"
22"
24"
28"
658"
658"
658"
658"
758"
758"
858"
858"
958"
958"
1034"
1134"
16"
14"
18"
19"
23"
21"
25"
29"
758"
758"
758"
758"
858"
858"
958"
958"
1034"
1034"
1134"
1234"
17"
15"
19"
20"
22"
24"
26"
30"
858"
858"
858"
858"
958"
958"
958"
958"
958"
958"
1034"
1034"
1034"
1034"
1134"
1134"
1134"
1134"
1234"
1234"
1234"
14"
14"
16"
15"
18"
20"
21"
23"
25"
27"
31" 32"
28"
26"
24"
22"
21"
17"
19"
MEDIUMDUTY
35 45
Features:* Temperature Range : -425 Degree * Exposted Polyurethane Surface are coated with
* (-254 Degrees C ) to 275 Degrees F (135 Degrees C) Monolar Mastic.
* Light or Medium Load Capacity * Support Saddles are constructed in accordance
* Design Load are Based on a Safety Factor of 5 with the MSS - SP58 and the ASME B31 Piping
* Steel Surface Finish : Hot Dip Galvanized or painted Code Requirements.
* Support Saddle are constructed on High Density * Technical Specification: AAAT - CS - 2010
Polyurethane with Fiberglass Reinforced Composite. * For Unique Applications, Contact AAA Tech.
* Support Saddle restrains - Y movement.
SWP - 360
17
AAA TECHNOLOGY AND SPECIALTIES CO., INC.
"F"
INS. THK.
O.D.
1" TYP.
SINGLE WEAR PAD.
INSULATION
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
3/8"
3/8"
INSULATION THICKNESS
PIPESIZE
VERTICAL LOAD ( lbs)
PADTHK.
1 / 2 "
F O.D.
3 / 4 "
F O.D.
1 "
F O.D.
1-1 / 2 "
F O.D.
2 "
F O.D.
2-1 / 2 "
F O.D.
3 "
F O.D.
3-1 / 2 "
F O.D.
4 "
F O.D.
LIGHTDUTY
925
975
1040
1160
55
85
105
155
185
225
275
345
415
530
610
690
775
845
885
114"
1"
34"
12" 12 2
2
238"
24
18
112"
2"
212"
3"
312"
4"
5"
6"
8"
10"
12"
14"
16"
18"
20"
24"
775
835
925
45
65
85
120
155
185
215
275
335
435
495
555
615
675
700
750
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
1818181818 18
18 18 18 18 18 18 18
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
238"
278"
312"
4"
412"
5"
5 916"
238"
278"
278"
312"
312"
4"
412"
5"
5 916"
658"
278"
278"
312"
312"
4"
412"
5"
658"
658"
512"
758"
858"
4"
412"
4"
5"
5"
5 916"
658"
658"
758"
758"
858"
958"
27"
23"
21"
19"
17"
16"
14"
1134"
5"
5"
5 916"
5 916"
658"
658"
758"
758"
858"
858"
958"
1034"
1234"
17"
15"
18"
20"
22"
24"
28"
658"
658"
658"
658"
758"
758"
858"
858"
958"
958"
1034"
1134"
16"
14"
18"
19"
23"
21"
25"
29"
758"
758"
758"
758"
858"
858"
958"
958"
1034"
1034"
1134"
1234"
17"
15"
19"
20"
22"
24"
26"
30"
858"
858"
858"
858"
958"
958"
958"
958"
958"
958"
1034"
1034"
1034"
1034"
1134"
1134"
1134"
1134"
1234"
1234"
1234"
14"
14"
16"
15"
18"
20"
21"
23"
25"
27"
31" 32"
28"
26"
24"
22"
21"
17"
19"
MEDIUMDUTY
35 45
Features:* Temperature Range : -425 Degree * Exposted Polyurethane Surface are coated with
* (-254 Degrees C ) to 275 Degrees F (135 Degrees C) Monolar Mastic.
* Light or Medium Load Capacity * Support Saddles are constructed in accordance
* Design Load are Based on a Safety Factor of 5 with the MSS - SP58 and the ASME B31 Piping
* Steel Surface Finish : Hot Dip Galvanized or painted Code Requirements.
* Support Saddle are constructed on High Density * Technical Specification: AAAT - CS - 2010
Polyurethane with Fiberglass Reinforced Composite. * For Unique Applications, Contact AAA Tech.
* Support Saddle restrains - Y movement.
DWP - 360
18
AAA TECHNOLOGY AND SPECIALTIES CO., INC.
"F"
INS. THK.
O.D.
1" TYP.
DOUBLE WEAR PAD
INSULATION
DOUBLE WEAR PAD
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
3/8"
3/8"
INSULATION THICKNESS
PIPESIZE
VERTICAL LOAD ( lbs)
PADTHK.
1 / 2 "
F O.D.
3 / 4 "
F O.D.
1 "
F O.D.
1-1 / 2 "
F O.D.
2 "
F O.D.
2-1 / 2 "
F O.D.
3 "
F O.D.
3-1 / 2 "
F O.D.
4 "
F O.D.
LIGHTDUTY
925
975
1040
1160
55
85
105
155
185
225
275
345
415
530
610
690
775
845
885
114"
1"
34"
12" 12 2
2
238"
24
18
112"
2"
212"
3"
312"
4"
5"
6"
8"
10"
12"
14"
16"
18"
20"
24"
775
835
925
45
65
85
120
155
185
215
275
335
435
495
555
615
675
700
750
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
1818181818 18
18 18 18 18 18 18 18
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
238"
278"
312"
4"
412"
5"
5 916"
238"
278"
278"
312"
312"
4"
412"
5"
5 916"
658"
278"
278"
312"
312"
4"
412"
5"
658"
658"
512"
758"
858"
4"
412"
4"
5"
5"
5 916"
658"
658"
758"
758"
858"
958"
27"
23"
21"
19"
17"
16"
14"
1134"
5"
5"
5 916"
5 916"
658"
658"
758"
758"
858"
858"
958"
1034"
1234"
17"
15"
18"
20"
22"
24"
28"
658"
658"
658"
658"
758"
758"
858"
858"
958"
958"
1034"
1134"
16"
14"
18"
19"
23"
21"
25"
29"
758"
758"
758"
758"
858"
858"
958"
958"
1034"
1034"
1134"
1234"
17"
15"
19"
20"
22"
24"
26"
30"
858"
858"
858"
858"
958"
958"
958"
958"
958"
958"
1034"
1034"
1034"
1034"
1134"
1134"
1134"
1134"
1234"
1234"
1234"
14"
14"
16"
15"
18"
20"
21"
23"
25"
27"
31" 32"
28"
26"
24"
22"
21"
17"
19"
MEDIUMDUTY
35 45
Features:* Temperature Range : -425 Degree * Exposted Polyurethane Surface are coated with
* (-254 Degrees C ) to 275 Degrees F (135 Degrees C) Monolar Mastic.
* Medium or Heavy Load Capacity * Support Saddles are constructed in accordance
* Design Load are Based on a Safety Factor of 5 with the MSS - SP58 and the ASME B31 Piping
* Steel Surface Finish : Hot Dip Galvanized or painted Code Requirements.
* Support Saddle are constructed on High Density * Technical Specification: AAAT - CS - 2010
Polyurethane with Fiberglass Reinforced Composite. * For Unique Applications, Contact AAA Tech.
* Support Saddle restrains - Y movement. * Steel Component are constructed of A - 36 Steel
SWP - 180MS
19
AAA TECHNOLOGY AND SPECIALTIES CO., INC.
INS. THK.
BOP
METAL SHIELD
INSULATION
O.D.
12" TYP.
"F"1" TYP.
SINGLE WEAR PAD
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
3/8"
3/8"
INSULATION THICKNESS
PIPESIZE
VERTICAL LOAD ( lbs)
PADTHK.
1 / 2 "
F O.D.
3 / 4 "
F O.D.
1 "
F O.D.
1-1 / 2 "
F O.D.
2 "
F O.D.
2-1 / 2 "
F O.D.
3 "
F O.D.
3-1 / 2 "
F O.D.
4 "
F O.D.
HEAVYDUTY
925
975
1040
1160
55
85
105
155
185
225
275
345
415
530
610
690
775
845
885
114"
1"
34"
12" 12 2
2
238"
24
18
112"
2"
212"
3"
312"
4"
5"
6"
8"
10"
12"
14"
16"
18"
20"
24"
775
835
925
45
65
85
120
155
185
215
275
335
435
495
555
615
675
700
750
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
1818181818 18
18 18 18 18 18 18 18
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
238"
278"
312"
4"
412"
5"
5 916"
238"
278"
278"
312"
312"
4"
412"
5"
5 916"
658"
278"
278"
312"
312"
4"
412"
5"
658"
658"
512"
758"
858"
4"
412"
4"
5"
5"
5 916"
658"
658"
758"
758"
858"
958"
27"
23"
21"
19"
17"
16"
14"
1134"
5"
5"
5 916"
5 916"
658"
658"
758"
758"
858"
858"
958"
1034"
1234"
17"
15"
18"
20"
22"
24"
28"
658"
658"
658"
658"
758"
758"
858"
858"
958"
958"
1034"
1134"
16"
14"
18"
19"
23"
21"
25"
29"
758"
758"
758"
758"
858"
858"
958"
958"
1034"
1034"
1134"
1234"
17"
15"
19"
20"
22"
24"
26"
30"
858"
858"
858"
858"
958"
958"
958"
958"
958"
958"
1034"
1034"
1034"
1034"
1134"
1134"
1134"
1134"
1234"
1234"
1234"
14"
14"
16"
15"
18"
20"
21"
23"
25"
27"
31" 32"
28"
26"
24"
22"
21"
17"
19"
MEDIUMDUTY
35 45
Features:* Temperature Range : -425 Degree * Exposted Polyurethane Surface are coated with
* (-254 Degrees C ) to 275 Degrees F (135 Degrees C) Monolar Mastic.
* Medium or Heavy Load Capacity * Support Saddles are constructed in accordance
* Design Load are Based on a Safety Factor of 5 with the MSS - SP58 and the ASME B31 Piping
* Steel Surface Finish : Hot Dip Galvanized or painted Code Requirements.
* Support Saddle are constructed on High Density * Technical Specification: AAAT - CS - 2010
Polyurethane with Fiberglass Reinforced Composite. * For Unique Applications, Contact AAA Tech.
* Support Saddle restrains - Y movement. * Steel Component are constructed of A - 36 Steel
AAA TECHNOLOGY AND SPECIALTIES CO., INC.
INS. THK.
METAL SHIELD
BOP
INSULATION
O.D.
12" TYP.
"F"1" TYP.
DOUBLE WEAR PADDOUBLE WEAR PAD
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
3/8"
3/8"
INSULATION THICKNESS
PIPESIZE
VERTICAL LOAD ( lbs)
PADTHK.
1 / 2 "
F O.D.
3 / 4 "
F O.D.
1 "
F O.D.
1-1 / 2 "
F O.D.
2 "
F O.D.
2-1 / 2 "
F O.D.
3 "
F O.D.
3-1 / 2 "
F O.D.
4 "
F O.D.
HEAVYDUTY
925
975
1040
1160
55
85
105
155
185
225
275
345
415
530
610
690
775
845
885
114"
1"
34"
12" 12 2
2
238"
24
18
112"
2"
212"
3"
312"
4"
5"
6"
8"
10"
12"
14"
16"
18"
20"
24"
775
835
925
45
65
85
120
155
185
215
275
335
435
495
555
615
675
700
750
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
1818181818 18
18 18 18 18 18 18 18
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
238"
278"
312"
4"
412"
5"
5 916"
238"
278"
278"
312"
312"
4"
412"
5"
5 916"
658"
278"
278"
312"
312"
4"
412"
5"
658"
658"
512"
758"
858"
4"
412"
4"
5"
5"
5 916"
658"
658"
758"
758"
858"
958"
27"
23"
21"
19"
17"
16"
14"
1134"
5"
5"
5 916"
5 916"
658"
658"
758"
758"
858"
858"
958"
1034"
1234"
17"
15"
18"
20"
22"
24"
28"
658"
658"
658"
658"
758"
758"
858"
858"
958"
958"
1034"
1134"
16"
14"
18"
19"
23"
21"
25"
29"
758"
758"
758"
758"
858"
858"
958"
958"
1034"
1034"
1134"
1234"
17"
15"
19"
20"
22"
24"
26"
30"
858"
858"
858"
858"
958"
958"
958"
958"
958"
958"
1034"
1034"
1034"
1034"
1134"
1134"
1134"
1134"
1234"
1234"
1234"
14"
14"
16"
15"
18"
20"
21"
23"
25"
27"
31" 32"
28"
26"
24"
22"
21"
17"
19"
MEDIUMDUTY
35 45
DWP - 180MS
20
Features:* Temperature Range : -425 Degree * Exposted Polyurethane Surface are coated with
* (-254 Degrees C ) to 275 Degrees F (135 Degrees C) Monolar Mastic.
* Medium or Heavy Load Capacity * Support Saddles are constructed in accordance
* Design Load are Based on a Safety Factor of 5 with the MSS - SP58 and the ASME B31 Piping
* Steel Surface Finish : Hot Dip Galvanized or painted Code Requirements.
* Support Saddle are constructed on High Density * Technical Specification: AAAT - CS - 2010
Polyurethane with Fiberglass Reinforced Composite. * For Unique Applications, Contact AAA Tech.
* Support Saddle restrains - Y movement. * Steel Component are constructed of A - 36 Steel
SWP - 360BC
21
AAA TECHNOLOGY AND SPECIALTIES CO., INC.
INS. THK.
SINGLE WEAR PADBOP
O.D.
12" TYP.
"F"1" TYP.
INSULATION
A-307 OR B7
BOLT/ STUDS
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
3/8"
3/8"
INSULATION THICKNESS
PIPESIZE
VERTICAL LOAD ( lbs)
PADTHK.
1 / 2 "
F O.D.
3 / 4 "
F O.D.
1 "
F O.D.
1-1 / 2 "
F O.D.
2 "
F O.D.
2-1 / 2 "
F O.D.
3 "
F O.D.
3-1 / 2 "
F O.D.
4 "
F O.D.
HEAVYDUTY
925
975
1040
1160
55
85
105
155
185
225
275
345
415
530
610
690
775
845
885
114"
1"
34"
12" 12 2
2
238"
24
18
112"
2"
212"
3"
312"
4"
5"
6"
8"
10"
12"
14"
16"
18"
20"
24"
775
835
925
45
65
85
120
155
185
215
275
335
435
495
555
615
675
700
750
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
1818181818 18
18 18 18 18 18 18 18
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
238"
278"
312"
4"
412"
5"
5 916"
238"
278"
278"
312"
312"
4"
412"
5"
5 916"
658"
278"
278"
312"
312"
4"
412"
5"
658"
658"
512"
758"
858"
4"
412"
4"
5"
5"
5 916"
658"
658"
758"
758"
858"
958"
27"
23"
21"
19"
17"
16"
14"
1134"
5"
5"
5 916"
5 916"
658"
658"
758"
758"
858"
858"
958"
1034"
1234"
17"
15"
18"
20"
22"
24"
28"
658"
658"
658"
658"
758"
758"
858"
858"
958"
958"
1034"
1134"
16"
14"
18"
19"
23"
21"
25"
29"
758"
758"
758"
758"
858"
858"
958"
958"
1034"
1034"
1134"
1234"
17"
15"
19"
20"
22"
24"
26"
30"
858"
858"
858"
858"
958"
958"
958"
958"
958"
958"
1034"
1034"
1034"
1034"
1134"
1134"
1134"
1134"
1234"
1234"
1234"
14"
14"
16"
15"
18"
20"
21"
23"
25"
27"
31" 32"
28"
26"
24"
22"
21"
17"
19"
MEDIUMDUTY
35 45
Features:* Temperature Range : -425 Degree * Exposted Polyurethane Surface are coated with
* (-254 Degrees C ) to 275 Degrees F (135 Degrees C) Monolar Mastic.
* Medium or Heavy Load Capacity * Support Saddles are constructed in accordance
* Design Load are Based on a Safety Factor of 5 with the MSS - SP58 and the ASME B31 Piping
* Steel Surface Finish : Hot Dip Galvanized or painted Code Requirements.
* Support Saddle are constructed on High Density * Technical Specification: AAAT - CS - 2010
Polyurethane with Fiberglass Reinforced Composite. * For Unique Applications, Contact AAA Tech.
* Support Saddle restrains - Y movement. * Steel Component are constructed of A - 36 Steel
DWP - 360BC
22
AAA TECHNOLOGY AND SPECIALTIES CO., INC.
DOUBLE WEAR PADDOUBLE WEAR PAD
INS. THK.
BOP
O.D.
12" TYP.
"F"1" TYP.
INSULATION
A-307 OR B7
BOLT/ STUDS
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
3/8"
3/8"
INSULATION THICKNESS
PIPESIZE
VERTICAL LOAD ( lbs)
PADTHK.
1 / 2 "
F O.D.
3 / 4 "
F O.D.
1 "
F O.D.
1-1 / 2 "
F O.D.
2 "
F O.D.
2-1 / 2 "
F O.D.
3 "
F O.D.
3-1 / 2 "
F O.D.
4 "
F O.D.
HEAVYDUTY
925
975
1040
1160
55
85
105
155
185
225
275
345
415
530
610
690
775
845
885
114"
1"
34"
12" 12 2
2
238"
24
18
112"
2"
212"
3"
312"
4"
5"
6"
8"
10"
12"
14"
16"
18"
20"
24"
775
835
925
45
65
85
120
155
185
215
275
335
435
495
555
615
675
700
750
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
1818181818 18
18 18 18 18 18 18 18
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
238"
278"
312"
4"
412"
5"
5 916"
238"
278"
278"
312"
312"
4"
412"
5"
5 916"
658"
278"
278"
312"
312"
4"
412"
5"
658"
658"
512"
758"
858"
4"
412"
4"
5"
5"
5 916"
658"
658"
758"
758"
858"
958"
27"
23"
21"
19"
17"
16"
14"
1134"
5"
5"
5 916"
5 916"
658"
658"
758"
758"
858"
858"
958"
1034"
1234"
17"
15"
18"
20"
22"
24"
28"
658"
658"
658"
658"
758"
758"
858"
858"
958"
958"
1034"
1134"
16"
14"
18"
19"
23"
21"
25"
29"
758"
758"
758"
758"
858"
858"
958"
958"
1034"
1034"
1134"
1234"
17"
15"
19"
20"
22"
24"
26"
30"
858"
858"
858"
858"
958"
958"
958"
958"
958"
958"
1034"
1034"
1034"
1034"
1134"
1134"
1134"
1134"
1234"
1234"
1234"
14"
14"
16"
15"
18"
20"
21"
23"
25"
27"
31" 32"
28"
26"
24"
22"
21"
17"
19"
MEDIUMDUTY
35 45
Features:* Temperature Range : -425 Degree * Exposted Polyurethane Surface are coated with
* (-254 Degrees C ) to 275 Degrees F (135 Degrees C) Monolar Mastic.
* Medium or Heavy Load Capacity * Support Saddles are constructed in accordance
* Design Load are Based on a Safety Factor of 5 with the MSS - SP58 and the ASME B31 Piping
* Steel Surface Finish : Hot Dip Galvanized or painted Code Requirements.
* Support Saddle are constructed on High Density * Technical Specification: AAAT - CS - 2010
Polyurethane with Fiberglass Reinforced Composite. * For Unique Applications, Contact AAA Tech.
* Support Saddle restrains - Y movement. * Steel Component are constructed of A - 36 Steel
SWP - 180MS - FB
23
AAA TECHNOLOGY AND SPECIALTIES CO., INC.
INSULATION12" TYP.
"F"1" TYP. METAL SHIELD
O.D.
SINGLE WEAR PAD
INS. THK.
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
3/8"
3/8"
INSULATION THICKNESS
PIPESIZE
VERTICAL LOAD ( lbs)
PADTHK.
1 / 2 "
F O.D.
3 / 4 "
F O.D.
1 "
F O.D.
1-1 / 2 "
F O.D.
2 "
F O.D.
2-1 / 2 "
F O.D.
3 "
F O.D.
3-1 / 2 "
F O.D.
4 "
F O.D.
HEAVYDUTY
925
975
1040
1160
55
85
105
155
185
225
275
345
415
530
610
690
775
845
885
114"
1"
34"
12" 12 2
2
238"
24
18
112"
2"
212"
3"
312"
4"
5"
6"
8"
10"
12"
14"
16"
18"
20"
24"
775
835
925
45
65
85
120
155
185
215
275
335
435
495
555
615
675
700
750
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
1818181818 18
18 18 18 18 18 18 18
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
238"
278"
312"
4"
412"
5"
5 916"
238"
278"
278"
312"
312"
4"
412"
5"
5 916"
658"
278"
278"
312"
312"
4"
412"
5"
658"
658"
512"
758"
858"
4"
412"
4"
5"
5"
5 916"
658"
658"
758"
758"
858"
958"
27"
23"
21"
19"
17"
16"
14"
1134"
5"
5"
5 916"
5 916"
658"
658"
758"
758"
858"
858"
958"
1034"
1234"
17"
15"
18"
20"
22"
24"
28"
658"
658"
658"
658"
758"
758"
858"
858"
958"
958"
1034"
1134"
16"
14"
18"
19"
23"
21"
25"
29"
758"
758"
758"
758"
858"
858"
958"
958"
1034"
1034"
1134"
1234"
17"
15"
19"
20"
22"
24"
26"
30"
858"
858"
858"
858"
958"
958"
958"
958"
958"
958"
1034"
1034"
1034"
1034"
1134"
1134"
1134"
1134"
1234"
1234"
1234"
14"
14"
16"
15"
18"
20"
21"
23"
25"
27"
31" 32"
28"
26"
24"
22"
21"
17"
19"
MEDIUMDUTY
35 45
Features:* Temperature Range : -425 Degree * Exposted Polyurethane Surface are coated with
* (-254 Degrees C ) to 275 Degrees F (135 Degrees C) Monolar Mastic.
* Medium or Heavy Load Capacity * Support Saddles are constructed in accordance
* Design Load are Based on a Safety Factor of 5 with the MSS - SP58 and the ASME B31 Piping
* Steel Surface Finish : Hot Dip Galvanized or painted Code Requirements.
* Support Saddle are constructed on High Density * Technical Specification: AAAT - CS - 2010
Polyurethane with Fiberglass Reinforced Composite. * For Unique Applications, Contact AAA Tech.
* Support Saddle restrains - Y movement. * Steel Component are constructed of A - 36 Steel
DWP - 180MS - FB
24
AAA TECHNOLOGY AND SPECIALTIES CO., INC.
A-307 OR B7
BOLT/ STUDS
O.D.
12" TYP.
"F"1" TYP.
INSULATION
INS. THK.
BOP
SINGLE WEAR PAD
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
3/8"
3/8"
INSULATION THICKNESS
PIPESIZE
VERTICAL LOAD ( lbs)
PADTHK.
1 / 2 "
F O.D.
3 / 4 "
F O.D.
1 "
F O.D.
1-1 / 2 "
F O.D.
2 "
F O.D.
2-1 / 2 "
F O.D.
3 "
F O.D.
3-1 / 2 "
F O.D.
4 "
F O.D.
HEAVYDUTY
925
975
1040
1160
55
85
105
155
185
225
275
345
415
530
610
690
775
845
885
114"
1"
34"
12" 12 2
2
238"
24
18
112"
2"
212"
3"
312"
4"
5"
6"
8"
10"
12"
14"
16"
18"
20"
24"
775
835
925
45
65
85
120
155
185
215
275
335
435
495
555
615
675
700
750
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
1818181818 18
18 18 18 18 18 18 18
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
238"
278"
312"
4"
412"
5"
5 916"
238"
278"
278"
312"
312"
4"
412"
5"
5 916"
658"
278"
278"
312"
312"
4"
412"
5"
658"
658"
512"
758"
858"
4"
412"
4"
5"
5"
5 916"
658"
658"
758"
758"
858"
958"
27"
23"
21"
19"
17"
16"
14"
1134"
5"
5"
5 916"
5 916"
658"
658"
758"
758"
858"
858"
958"
1034"
1234"
17"
15"
18"
20"
22"
24"
28"
658"
658"
658"
658"
758"
758"
858"
858"
958"
958"
1034"
1134"
16"
14"
18"
19"
23"
21"
25"
29"
758"
758"
758"
758"
858"
858"
958"
958"
1034"
1034"
1134"
1234"
17"
15"
19"
20"
22"
24"
26"
30"
858"
858"
858"
858"
958"
958"
958"
958"
958"
958"
1034"
1034"
1034"
1034"
1134"
1134"
1134"
1134"
1234"
1234"
1234"
14"
14"
16"
15"
18"
20"
21"
23"
25"
27"
31" 32"
28"
26"
24"
22"
21"
17"
19"
MEDIUMDUTY
35 45
Features:* Temperature Range : -425 Degree * Exposted Polyurethane Surface are coated with
* (-254 Degrees C ) to 275 Degrees F (135 Degrees C) Monolar Mastic.
* Medium or Heavy Load Capacity * Support Saddles are constructed in accordance
* Design Load are Based on a Safety Factor of 5 with the MSS - SP58 and the ASME B31 Piping
* Steel Surface Finish : Hot Dip Galvanized or painted Code Requirements.
* Support Saddle are constructed on High Density * Technical Specification: AAAT - CS - 2010
Polyurethane with Fiberglass Reinforced Composite. * For Unique Applications, Contact AAA Tech.
* Support Saddle restrains - Y movement. * Steel Component are constructed of A - 36 Steel
SWP - 360BC - FB
25
AAA TECHNOLOGY AND SPECIALTIES CO., INC.
A-307 OR B7
BOLT/ STUDS
O.D.
12" TYP.
"F"1" TYP.
INSULATION
INS. THK.
BOP
SINGLE WEAR PAD
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
3/8"
3/8"
INSULATION THICKNESS
PIPESIZE
VERTICAL LOAD ( lbs)
PADTHK.
1 / 2 "
F O.D.
3 / 4 "
F O.D.
1 "
F O.D.
1-1 / 2 "
F O.D.
2 "
F O.D.
2-1 / 2 "
F O.D.
3 "
F O.D.
3-1 / 2 "
F O.D.
4 "
F O.D.
HEAVYDUTY
925
975
1040
1160
55
85
105
155
185
225
275
345
415
530
610
690
775
845
885
114"
1"
34"
12" 12 2
2
238"
24
18
112"
2"
212"
3"
312"
4"
5"
6"
8"
10"
12"
14"
16"
18"
20"
24"
775
835
925
45
65
85
120
155
185
215
275
335
435
495
555
615
675
700
750
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
1818181818 18
18 18 18 18 18 18 18
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
238"
278"
312"
4"
412"
5"
5 916"
238"
278"
278"
312"
312"
4"
412"
5"
5 916"
658"
278"
278"
312"
312"
4"
412"
5"
658"
658"
512"
758"
858"
4"
412"
4"
5"
5"
5 916"
658"
658"
758"
758"
858"
958"
27"
23"
21"
19"
17"
16"
14"
1134"
5"
5"
5 916"
5 916"
658"
658"
758"
758"
858"
858"
958"
1034"
1234"
17"
15"
18"
20"
22"
24"
28"
658"
658"
658"
658"
758"
758"
858"
858"
958"
958"
1034"
1134"
16"
14"
18"
19"
23"
21"
25"
29"
758"
758"
758"
758"
858"
858"
958"
958"
1034"
1034"
1134"
1234"
17"
15"
19"
20"
22"
24"
26"
30"
858"
858"
858"
858"
958"
958"
958"
958"
958"
958"
1034"
1034"
1034"
1034"
1134"
1134"
1134"
1134"
1234"
1234"
1234"
14"
14"
16"
15"
18"
20"
21"
23"
25"
27"
31" 32"
28"
26"
24"
22"
21"
17"
19"
MEDIUMDUTY
35 45
Features:* Temperature Range : -425 Degree * Exposted Polyurethane Surface are coated with
* (-254 Degrees C ) to 275 Degrees F (135 Degrees C) Monolar Mastic.
* Medium or Heavy Load Capacity * Support Saddles are constructed in accordance
* Design Load are Based on a Safety Factor of 5 with the MSS - SP58 and the ASME B31 Piping
* Steel Surface Finish : Hot Dip Galvanized or painted Code Requirements.
* Support Saddle are constructed on High Density * Technical Specification: AAAT - CS - 2010
Polyurethane with Fiberglass Reinforced Composite. * For Unique Applications, Contact AAA Tech.
* Support Saddle restrains - Y movement. * Steel Component are constructed of A - 36 Steel
DWP - 360BC - FB
26
AAA TECHNOLOGY AND SPECIALTIES CO., INC.
DOUBLE WEAR PADDOUBLE WEAR PAD
12" TYP.
"F"1" TYP.
INSULATION
INS. THK.
BOP
A-307 OR B7
BOLT/ STUDS
O.D.
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
3/8"
3/8"
INSULATION THICKNESS
PIPESIZE
VERTICAL LOAD ( lbs)
PADTHK.
1 / 2 "
F O.D.
3 / 4 "
F O.D.
1 "
F O.D.
1-1 / 2 "
F O.D.
2 "
F O.D.
2-1 / 2 "
F O.D.
3 "
F O.D.
3-1 / 2 "
F O.D.
4 "
F O.D.
HEAVYDUTY
925
975
1040
1160
55
85
105
155
185
225
275
345
415
530
610
690
775
845
885
114"
1"
34"
12" 12 2
2
238"
24
18
112"
2"
212"
3"
312"
4"
5"
6"
8"
10"
12"
14"
16"
18"
20"
24"
775
835
925
45
65
85
120
155
185
215
275
335
435
495
555
615
675
700
750
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
1818181818 18
18 18 18 18 18 18 18
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
238"
278"
312"
4"
412"
5"
5 916"
238"
278"
278"
312"
312"
4"
412"
5"
5 916"
658"
278"
278"
312"
312"
4"
412"
5"
658"
658"
512"
758"
858"
4"
412"
4"
5"
5"
5 916"
658"
658"
758"
758"
858"
958"
27"
23"
21"
19"
17"
16"
14"
1134"
5"
5"
5 916"
5 916"
658"
658"
758"
758"
858"
858"
958"
1034"
1234"
17"
15"
18"
20"
22"
24"
28"
658"
658"
658"
658"
758"
758"
858"
858"
958"
958"
1034"
1134"
16"
14"
18"
19"
23"
21"
25"
29"
758"
758"
758"
758"
858"
858"
958"
958"
1034"
1034"
1134"
1234"
17"
15"
19"
20"
22"
24"
26"
30"
858"
858"
858"
858"
958"
958"
958"
958"
958"
958"
1034"
1034"
1034"
1034"
1134"
1134"
1134"
1134"
1234"
1234"
1234"
14"
14"
16"
15"
18"
20"
21"
23"
25"
27"
31" 32"
28"
26"
24"
22"
21"
17"
19"
MEDIUMDUTY
35 45
Features:* Temperature Range : -425 Degree * Exposted Polyurethane Surface are coated with
* (-254 Degrees C ) to 275 Degrees F (135 Degrees C) Monolar Mastic.
* Medium or Heavy Load Capacity * Support Saddles are constructed in accordance
* Design Load are Based on a Safety Factor of 5 with the MSS - SP58 and the ASME B31 Piping
* Steel Surface Finish : Hot Dip Galvanized or painted Code Requirements.
* Support Saddle are constructed on High Density * Technical Specification: AAAT - CS - 2010
Polyurethane with Fiberglass Reinforced Composite. * For Unique Applications, Contact AAA Tech.
* Support Saddle restrains - Y movement. * Steel Component are constructed of A - 36 Steel
SWP - 360BC - DW
27
AAA TECHNOLOGY AND SPECIALTIES CO., INC.
INSULATION
A-307 OR B7
BOLT/ STUDS
INS. THK.
BOP
O.D.
12" TYP.
6"1" TYP." W "
12" 18"
SINGLE WEAR PAD
INSULATION THICKNESS
PIPESIZE BOP O.D.
1 " 1-1 / 2 " 2 " 2-1 / 2 " 3 " 4 "
18000
19000
21000
22000
240
350
425
500
575
675
1200
2000
3000
5500
6000
7000
8000
9000
16000
514"2"
212"
3"
312"
4"
5"
6"
8"
10"
12"
14"
16"
18"
20"
24"
938"
1112"
1312"
1718"
6 516"
838"
1038"
1434"
1634"
7250
7750
8000
250
300
350
400
490
580
1050
1250
2300
2500
2900
4250
4750
5750
6250
6750
160
VERTICAL LOAD ( lbs)
" W "
10
TEE
4
4
6
8
10
12
12
14
18
18
20
22
22
24
26"
28"
30"
32"
34" 24000
8600 2436"
2750016000 28
42"
40"
2900016500 28
5 " 6 " 7 " 8 "MEDIUMDUTY
HEAVYDUTY
534"
838"
738"
1534"
1918"
2118"
2318"
2718"
2918"
3112"
3312"
3512"
3712"
3912"
4312"
4578"
BOP O.D. BOP O.D. BOP O.D. BOP O.D. BOP O.D. BOP O.D. BOP O.D. BOP O.D. BOP O.D.
614"
738"
738"
838"
938"
1212"
1818"
2018"
2218"
2418"
2818"
3018"
3212"
3412"
3612"
3812"
4012"
4478"
4678" 477
8" 4878" 497
8" 5178" 537
8" 5578" 577
8" 5978"
4578" 467
8" 4778" 537
8" 5578" 577
8"
4712" 491
2" 5112"451
2"4112"401
2"3912"
4378"
4212" 451
2" 4712" 491
2"4312"411
2" 5112" 531
2"
4912"431
2" 4712"451
2"4112"391
2"3812"371
2"
4712"
4512"
4318"
2934"
2734"
2534"
2334"
4512"
4312"
4118"
2734"
2534"
2334"
2134"
2034"
4312"
4112"
3918"
2534"
2334"
2134"
1934"
1834"
4112"
3912"
3718"
2334"
2134"
1934"
1734"
1634"
1534"
3912"
3712"
3518"
2134"
1934"
1734"
1534"
1434"
1312"
1312"
1212"
1212"
1112"
3712"
3512"
3318"
1934"
1734"
1534"
1312"
1212"
1112"
3612"
3412"
1834"
1634"
1434"
1312"
1112"
1038"
3512"
3312"
3118"
1734"
1534"
1312"
1112"
1038"
938"
838"
738"
TEE
TEE
TEE
TEE
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
6"
6"
6"
6"
6"
6"
6"
6"
738"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
838"
938"
1918"
2118"
2318"
2518"
2918"
4"
4"
4"
4"
4"
4"
4"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
938"
838"
938"
1038"
2018"
2218"
2418"
2618"
3018"
3218"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
1038"
938"
1038"
1112"
2118"
2318"
2518"
2718"
3118"
6"
6"
6"
6"
6"
6"
6"
8"
6"
6"
6"
6"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
2318"
2518"
2718"
2918"
3318"
4978"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
1434"
1312"
1434"
1534"
2518"
2718"
2918"
3118"
3518"
5178"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
1634"
1534"
1634"
1734"
1734"
2718"
2918"
3118"
3318"
3718"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
1834"
1734"
1834"
1934"
1934"
2918"
3118"
3318"
3518"
3918" 411
8"
3718"
3118"
3318"
3518"
2234"
2134"
2134"
2034"
1934"
2034"
25000
Features:* Temperature Range : -425 Degree * Exposted Polyurethane Surface are coated with
* (-254 Degrees C ) to 275 Degrees F (135 Degrees C) Monolar Mastic.
* Medium or Heavy Load Capacity * Support Saddles are constructed in accordance
* Design Load are Based on a Safety Factor of 5 with the MSS - SP58 and the ASME B31 Piping
* Steel Surface Finish : Hot Dip Galvanized or painted Code Requirements.
* Support Saddle are constructed on High Density * Technical Specification: AAAT - CS - 2010
Polyurethane with Fiberglass Reinforced Composite. * For Unique Applications, Contact AAA Tech.
* Support Saddle restrains - Y movement. * Steel Component are constructed of A - 36 Steel
DWP - 360BC - DW
28
AAA TECHNOLOGY AND SPECIALTIES CO., INC.
DOUBLE WEAR PADDOUBLE WEAR PAD
INS. THK.
BOP
O.D.
12" TYP.
6"1" TYP." W "
12" 18"
INSULATION
A-307 OR B7
BOLT/ STUDS
INSULATION THICKNESS
PIPESIZE BOP O.D.
1 " 1-1 / 2 " 2 " 2-1 / 2 " 3 " 4 "
18000
19000
21000
22000
240
350
425
500
575
675
1200
2000
3000
5500
6000
7000
8000
9000
16000
514"2"
212"
3"
312"
4"
5"
6"
8"
10"
12"
14"
16"
18"
20"
24"
938"
1112"
1312"
1718"
6 516"
838"
1038"
1434"
1634"
7250
7750
8000
250
300
350
400
490
580
1050
1250
2300
2500
2900
4250
4750
5750
6250
6750
160
VERTICAL LOAD ( lbs)
" W "
10
TEE
4
4
6
8
10
12
12
14
18
18
20
22
22
24
26"
28"
30"
32"
34" 24000
8600 2436"
2750016000 28
42"
40"
2900016500 28
5 " 6 " 7 " 8 "MEDIUMDUTY
HEAVYDUTY
534"
838"
738"
1534"
1918"
2118"
2318"
2718"
2918"
3112"
3312"
3512"
3712"
3912"
4312"
4578"
BOP O.D. BOP O.D. BOP O.D. BOP O.D. BOP O.D. BOP O.D. BOP O.D. BOP O.D. BOP O.D.
614"
738"
738"
838"
938"
1212"
1818"
2018"
2218"
2418"
2818"
3018"
3212"
3412"
3612"
3812"
4012"
4478"
4678" 477
8" 4878" 497
8" 5178" 537
8" 5578" 577
8" 5978"
4578" 467
8" 4778" 537
8" 5578" 577
8"
4712" 491
2" 5112"451
2"4112"401
2"3912"
4378"
4212" 451
2" 4712" 491
2"4312"411
2" 5112" 531
2"
4912"431
2" 4712"451
2"4112"391
2"3812"371
2"
4712"
4512"
4318"
2934"
2734"
2534"
2334"
4512"
4312"
4118"
2734"
2534"
2334"
2134"
2034"
4312"
4112"
3918"
2534"
2334"
2134"
1934"
1834"
4112"
3912"
3718"
2334"
2134"
1934"
1734"
1634"
1534"
3912"
3712"
3518"
2134"
1934"
1734"
1534"
1434"
1312"
1312"
1212"
1212"
1112"
3712"
3512"
3318"
1934"
1734"
1534"
1312"
1212"
1112"
3612"
3412"
1834"
1634"
1434"
1312"
1112"
1038"
3512"
3312"
3118"
1734"
1534"
1312"
1112"
1038"
938"
838"
738"
TEE
TEE
TEE
TEE
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
6"
6"
6"
6"
6"
6"
6"
6"
738"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
838"
938"
1918"
2118"
2318"
2518"
2918"
4"
4"
4"
4"
4"
4"
4"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
938"
838"
938"
1038"
2018"
2218"
2418"
2618"
3018"
3218"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
1038"
938"
1038"
1112"
2118"
2318"
2518"
2718"
3118"
6"
6"
6"
6"
6"
6"
6"
8"
6"
6"
6"
6"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
2318"
2518"
2718"
2918"
3318"
4978"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
1434"
1312"
1434"
1534"
2518"
2718"
2918"
3118"
3518"
5178"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
1634"
1534"
1634"
1734"
1734"
2718"
2918"
3118"
3318"
3718"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
1834"
1734"
1834"
1934"
1934"
2918"
3118"
3318"
3518"
3918" 411
8"
3718"
3118"
3318"
3518"
2234"
2134"
2134"
2034"
1934"
2034"
25000
Features:* Temperature Range : -425 Degree * Exposted Polyurethane Surface are coated with
* (-254 Degrees C ) to 275 Degrees F (135 Degrees C) Monolar Mastic.
* Medium or Heavy Load Capacity * Support Saddles are constructed in accordance
* Design Load are Based on a Safety Factor of 5 with the MSS - SP58 and the ASME B31 Piping
* Steel Surface Finish : Hot Dip Galvanized or painted Code Requirements.
* Support Saddle are constructed on High Density * Technical Specification: AAAT - CS - 2010
Polyurethane with Fiberglass Reinforced Composite. * For Unique Applications, Contact AAA Tech.
* Support Saddle restrains - Y movement. * Steel Component are constructed of A - 36 Steel
SWP - 360BC - DW - GC
29
AAA TECHNOLOGY AND SPECIALTIES CO., INC.
" W "
12" TYP.
6"1" TYP.
12" 18"
INS. THK.
BOP
A-307 OR B7
BOLT/ STUDS
O.D.
INSULATION
SINGLE WEAR PAD
INSULATION THICKNESS
PIPESIZE BOP O.D.
1 " 1-1 / 2 " 2 " 2-1 / 2 " 3 " 4 "
18000
19000
21000
22000
240
350
425
500
575
675
1200
2000
3000
5500
6000
7000
8000
9000
16000
514"2"
212"
3"
312"
4"
5"
6"
8"
10"
12"
14"
16"
18"
20"
24"
938"
1112"
1312"
1718"
6 516"
838"
1038"
1434"
1634"
7250
7750
8000
250
300
350
400
490
580
1050
1250
2300
2500
2900
4250
4750
5750
6250
6750
160
VERTICAL LOAD ( lbs)
" W "
10
TEE
4
4
6
8
10
12
12
14
18
18
20
22
22
24
26"
28"
30"
32"
34" 24000
8600 2436"
2750016000 28
42"
40"
2900016500 28
5 " 6 " 7 " 8 "MEDIUMDUTY
HEAVYDUTY
534"
838"
738"
1534"
1918"
2118"
2318"
2718"
2918"
3112"
3312"
3512"
3712"
3912"
4312"
4578"
BOP O.D. BOP O.D. BOP O.D. BOP O.D. BOP O.D. BOP O.D. BOP O.D. BOP O.D. BOP O.D.
614"
738"
738"
838"
938"
1212"
1818"
2018"
2218"
2418"
2818"
3018"
3212"
3412"
3612"
3812"
4012"
4478"
4678" 477
8" 4878" 497
8" 5178" 537
8" 5578" 577
8" 5978"
4578" 467
8" 4778" 537
8" 5578" 577
8"
4712" 491
2" 5112"451
2"4112"401
2"3912"
4378"
4212" 451
2" 4712" 491
2"4312"411
2" 5112" 531
2"
4912"431
2" 4712"451
2"4112"391
2"3812"371
2"
4712"
4512"
4318"
2934"
2734"
2534"
2334"
4512"
4312"
4118"
2734"
2534"
2334"
2134"
2034"
4312"
4112"
3918"
2534"
2334"
2134"
1934"
1834"
4112"
3912"
3718"
2334"
2134"
1934"
1734"
1634"
1534"
3912"
3712"
3518"
2134"
1934"
1734"
1534"
1434"
1312"
1312"
1212"
1212"
1112"
3712"
3512"
3318"
1934"
1734"
1534"
1312"
1212"
1112"
3612"
3412"
1834"
1634"
1434"
1312"
1112"
1038"
3512"
3312"
3118"
1734"
1534"
1312"
1112"
1038"
938"
838"
738"
TEE
TEE
TEE
TEE
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
6"
6"
6"
6"
6"
6"
6"
6"
738"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
838"
938"
1918"
2118"
2318"
2518"
2918"
4"
4"
4"
4"
4"
4"
4"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
938"
838"
938"
1038"
2018"
2218"
2418"
2618"
3018"
3218"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
1038"
938"
1038"
1112"
2118"
2318"
2518"
2718"
3118"
6"
6"
6"
6"
6"
6"
6"
8"
6"
6"
6"
6"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
2318"
2518"
2718"
2918"
3318"
4978"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
1434"
1312"
1434"
1534"
2518"
2718"
2918"
3118"
3518"
5178"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
1634"
1534"
1634"
1734"
1734"
2718"
2918"
3118"
3318"
3718"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
1834"
1734"
1834"
1934"
1934"
2918"
3118"
3318"
3518"
3918" 411
8"
3718"
3118"
3318"
3518"
2234"
2134"
2134"
2034"
1934"
2034"
25000
Features:* Temperature Range : -425 Degree * Exposted Polyurethane Surface are coated with
* (-254 Degrees C ) to 275 Degrees F (135 Degrees C) Monolar Mastic.
* Medium or Heavy Load Capacity * Support Saddles are constructed in accordance
* Design Load are Based on a Safety Factor of 5 with the MSS - SP58 and the ASME B31 Piping
* Steel Surface Finish : Hot Dip Galvanized or painted Code Requirements.
* Support Saddle are constructed on High Density * Technical Specification: AAAT - CS - 2010
Polyurethane with Fiberglass Reinforced Composite. * For Unique Applications, Contact AAA Tech.
* Support Saddle restrains - Y movement. * Steel Component are constructed of A - 36 Steel
DWP - 360BC - DW - GC
30
AAA TECHNOLOGY AND SPECIALTIES CO., INC.
DOUBLE WEAR PADDOUBLE WEAR PAD
" W "
12" TYP.
6"1" TYP.
12" 18"
INS. THK.
BOP
A-307 OR B7
BOLT/ STUDS
O.D.
INSULATION
INSULATION THICKNESS
PIPESIZE BOP O.D.
1 " 1-1 / 2 " 2 " 2-1 / 2 " 3 " 4 "
18000
19000
21000
22000
240
350
425
500
575
675
1200
2000
3000
5500
6000
7000
8000
9000
16000
514"2"
212"
3"
312"
4"
5"
6"
8"
10"
12"
14"
16"
18"
20"
24"
938"
1112"
1312"
1718"
6 516"
838"
1038"
1434"
1634"
7250
7750
8000
250
300
350
400
490
580
1050
1250
2300
2500
2900
4250
4750
5750
6250
6750
160
VERTICAL LOAD ( lbs)
" W "
10
TEE
4
4
6
8
10
12
12
14
18
18
20
22
22
24
26"
28"
30"
32"
34" 24000
8600 2436"
2750016000 28
42"
40"
2900016500 28
5 " 6 " 7 " 8 "MEDIUMDUTY
HEAVYDUTY
534"
838"
738"
1534"
1918"
2118"
2318"
2718"
2918"
3112"
3312"
3512"
3712"
3912"
4312"
4578"
BOP O.D. BOP O.D. BOP O.D. BOP O.D. BOP O.D. BOP O.D. BOP O.D. BOP O.D. BOP O.D.
614"
738"
738"
838"
938"
1212"
1818"
2018"
2218"
2418"
2818"
3018"
3212"
3412"
3612"
3812"
4012"
4478"
4678" 477
8" 4878" 497
8" 5178" 537
8" 5578" 577
8" 5978"
4578" 467
8" 4778" 537
8" 5578" 577
8"
4712" 491
2" 5112"451
2"4112"401
2"3912"
4378"
4212" 451
2" 4712" 491
2"4312"411
2" 5112" 531
2"
4912"431
2" 4712"451
2"4112"391
2"3812"371
2"
4712"
4512"
4318"
2934"
2734"
2534"
2334"
4512"
4312"
4118"
2734"
2534"
2334"
2134"
2034"
4312"
4112"
3918"
2534"
2334"
2134"
1934"
1834"
4112"
3912"
3718"
2334"
2134"
1934"
1734"
1634"
1534"
3912"
3712"
3518"
2134"
1934"
1734"
1534"
1434"
1312"
1312"
1212"
1212"
1112"
3712"
3512"
3318"
1934"
1734"
1534"
1312"
1212"
1112"
3612"
3412"
1834"
1634"
1434"
1312"
1112"
1038"
3512"
3312"
3118"
1734"
1534"
1312"
1112"
1038"
938"
838"
738"
TEE
TEE
TEE
TEE
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
6"
6"
6"
6"
6"
6"
6"
6"
738"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
838"
938"
1918"
2118"
2318"
2518"
2918"
4"
4"
4"
4"
4"
4"
4"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
938"
838"
938"
1038"
2018"
2218"
2418"
2618"
3018"
3218"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
1038"
938"
1038"
1112"
2118"
2318"
2518"
2718"
3118"
6"
6"
6"
6"
6"
6"
6"
8"
6"
6"
6"
6"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
2318"
2518"
2718"
2918"
3318"
4978"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
1434"
1312"
1434"
1534"
2518"
2718"
2918"
3118"
3518"
5178"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
1634"
1534"
1634"
1734"
1734"
2718"
2918"
3118"
3318"
3718"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
1834"
1734"
1834"
1934"
1934"
2918"
3118"
3318"
3518"
3918" 411
8"
3718"
3118"
3318"
3518"
2234"
2134"
2134"
2034"
1934"
2034"
25000
Features:* Temperature Range : -425 Degree * Exposted Polyurethane Surface are coated with
* (-254 Degrees C ) to 275 Degrees F (135 Degrees C) Monolar Mastic.
* Medium or Heavy Load Capacity * Support Saddles are constructed in accordance
* Design Load are Based on a Safety Factor of 5 with the MSS - SP58 and the ASME B31 Piping
* Steel Surface Finish : Hot Dip Galvanized or painted Code Requirements.
* Support Saddle are constructed on High Density * Technical Specification: AAAT - CS - 2010
Polyurethane with Fiberglass Reinforced Composite. * For Unique Applications, Contact AAA Tech.
* Support Saddle restrains - Y movement. * Steel Component are constructed of A - 36 Steel
SWP - 360BC - DW - BG
31
AAA TECHNOLOGY AND SPECIALTIES CO., INC.
" W "
INS. THK.
BOP
A-307 OR B7
BOLT/ STUDS
O.D.
12" TYP.
6"1" TYP.
12" 18"
INSULATION
SINGLE WEAR PAD
INSULATION THICKNESS
PIPESIZE BOP O.D.
1 " 1-1 / 2 " 2 " 2-1 / 2 " 3 " 4 "
18000
19000
21000
22000
240
350
425
500
575
675
1200
2000
3000
5500
6000
7000
8000
9000
16000
514"2"
212"
3"
312"
4"
5"
6"
8"
10"
12"
14"
16"
18"
20"
24"
938"
1112"
1312"
1718"
6 516"
838"
1038"
1434"
1634"
7250
7750
8000
250
300
350
400
490
580
1050
1250
2300
2500
2900
4250
4750
5750
6250
6750
160
VERTICAL LOAD ( lbs)
" W "
10
TEE
4
4
6
8
10
12
12
14
18
18
20
22
22
24
26"
28"
30"
32"
34" 24000
8600 2436"
2750016000 28
42"
40"
2900016500 28
5 " 6 " 7 " 8 "MEDIUMDUTY
HEAVYDUTY
534"
838"
738"
1534"
1918"
2118"
2318"
2718"
2918"
3112"
3312"
3512"
3712"
3912"
4312"
4578"
BOP O.D. BOP O.D. BOP O.D. BOP O.D. BOP O.D. BOP O.D. BOP O.D. BOP O.D. BOP O.D.
614"
738"
738"
838"
938"
1212"
1818"
2018"
2218"
2418"
2818"
3018"
3212"
3412"
3612"
3812"
4012"
4478"
4678" 477
8" 4878" 497
8" 5178" 537
8" 5578" 577
8" 5978"
4578" 467
8" 4778" 537
8" 5578" 577
8"
4712" 491
2" 5112"451
2"4112"401
2"3912"
4378"
4212" 451
2" 4712" 491
2"4312"411
2" 5112" 531
2"
4912"431
2" 4712"451
2"4112"391
2"3812"371
2"
4712"
4512"
4318"
2934"
2734"
2534"
2334"
4512"
4312"
4118"
2734"
2534"
2334"
2134"
2034"
4312"
4112"
3918"
2534"
2334"
2134"
1934"
1834"
4112"
3912"
3718"
2334"
2134"
1934"
1734"
1634"
1534"
3912"
3712"
3518"
2134"
1934"
1734"
1534"
1434"
1312"
1312"
1212"
1212"
1112"
3712"
3512"
3318"
1934"
1734"
1534"
1312"
1212"
1112"
3612"
3412"
1834"
1634"
1434"
1312"
1112"
1038"
3512"
3312"
3118"
1734"
1534"
1312"
1112"
1038"
938"
838"
738"
TEE
TEE
TEE
TEE
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
6"
6"
6"
6"
6"
6"
6"
6"
738"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
838"
938"
1918"
2118"
2318"
2518"
2918"
4"
4"
4"
4"
4"
4"
4"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
938"
838"
938"
1038"
2018"
2218"
2418"
2618"
3018"
3218"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
1038"
938"
1038"
1112"
2118"
2318"
2518"
2718"
3118"
6"
6"
6"
6"
6"
6"
6"
8"
6"
6"
6"
6"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
2318"
2518"
2718"
2918"
3318"
4978"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
1434"
1312"
1434"
1534"
2518"
2718"
2918"
3118"
3518"
5178"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
1634"
1534"
1634"
1734"
1734"
2718"
2918"
3118"
3318"
3718"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
1834"
1734"
1834"
1934"
1934"
2918"
3118"
3318"
3518"
3918" 411
8"
3718"
3118"
3318"
3518"
2234"
2134"
2134"
2034"
1934"
2034"
25000
Features:* Temperature Range : -425 Degree * Exposted Polyurethane Surface are coated with
* (-254 Degrees C ) to 275 Degrees F (135 Degrees C) Monolar Mastic.
* Medium or Heavy Load Capacity * Support Saddles are constructed in accordance
* Design Load are Based on a Safety Factor of 5 with the MSS - SP58 and the ASME B31 Piping
* Steel Surface Finish : Hot Dip Galvanized or painted Code Requirements.
* Support Saddle are constructed on High Density * Technical Specification: AAAT - CS - 2010
Polyurethane with Fiberglass Reinforced Composite. * For Unique Applications, Contact AAA Tech.
* Support Saddle restrains - Y movement. * Steel Component are constructed of A - 36 Steel
DWP - 360BC - DW - BG
32
AAA TECHNOLOGY AND SPECIALTIES CO., INC.
DOUBLE WEAR PADDOUBLE WEAR PAD" W "
INS. THK.
BOP
A-307 OR B7
BOLT/ STUDS
O.D.
12" TYP.
6"1" TYP.
12" 18"
INSULATION
INSULATION THICKNESS
PIPESIZE BOP O.D.
1 " 1-1 / 2 " 2 " 2-1 / 2 " 3 " 4 "
18000
19000
21000
22000
240
350
425
500
575
675
1200
2000
3000
5500
6000
7000
8000
9000
16000
514"2"
212"
3"
312"
4"
5"
6"
8"
10"
12"
14"
16"
18"
20"
24"
938"
1112"
1312"
1718"
6 516"
838"
1038"
1434"
1634"
7250
7750
8000
250
300
350
400
490
580
1050
1250
2300
2500
2900
4250
4750
5750
6250
6750
160
VERTICAL LOAD ( lbs)
" W "
10
TEE
4
4
6
8
10
12
12
14
18
18
20
22
22
24
26"
28"
30"
32"
34" 24000
8600 2436"
2750016000 28
42"
40"
2900016500 28
5 " 6 " 7 " 8 "MEDIUMDUTY
HEAVYDUTY
534"
838"
738"
1534"
1918"
2118"
2318"
2718"
2918"
3112"
3312"
3512"
3712"
3912"
4312"
4578"
BOP O.D. BOP O.D. BOP O.D. BOP O.D. BOP O.D. BOP O.D. BOP O.D. BOP O.D. BOP O.D.
614"
738"
738"
838"
938"
1212"
1818"
2018"
2218"
2418"
2818"
3018"
3212"
3412"
3612"
3812"
4012"
4478"
4678" 477
8" 4878" 497
8" 5178" 537
8" 5578" 577
8" 5978"
4578" 467
8" 4778" 537
8" 5578" 577
8"
4712" 491
2" 5112"451
2"4112"401
2"3912"
4378"
4212" 451
2" 4712" 491
2"4312"411
2" 5112" 531
2"
4912"431
2" 4712"451
2"4112"391
2"3812"371
2"
4712"
4512"
4318"
2934"
2734"
2534"
2334"
4512"
4312"
4118"
2734"
2534"
2334"
2134"
2034"
4312"
4112"
3918"
2534"
2334"
2134"
1934"
1834"
4112"
3912"
3718"
2334"
2134"
1934"
1734"
1634"
1534"
3912"
3712"
3518"
2134"
1934"
1734"
1534"
1434"
1312"
1312"
1212"
1212"
1112"
3712"
3512"
3318"
1934"
1734"
1534"
1312"
1212"
1112"
3612"
3412"
1834"
1634"
1434"
1312"
1112"
1038"
3512"
3312"
3118"
1734"
1534"
1312"
1112"
1038"
938"
838"
738"
TEE
TEE
TEE
TEE
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
6"
6"
6"
6"
6"
6"
6"
6"
738"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
838"
938"
1918"
2118"
2318"
2518"
2918"
4"
4"
4"
4"
4"
4"
4"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
938"
838"
938"
1038"
2018"
2218"
2418"
2618"
3018"
3218"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
1038"
938"
1038"
1112"
2118"
2318"
2518"
2718"
3118"
6"
6"
6"
6"
6"
6"
6"
8"
6"
6"
6"
6"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
2318"
2518"
2718"
2918"
3318"
4978"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
1434"
1312"
1434"
1534"
2518"
2718"
2918"
3118"
3518"
5178"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
1634"
1534"
1634"
1734"
1734"
2718"
2918"
3118"
3318"
3718"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
1834"
1734"
1834"
1934"
1934"
2918"
3118"
3318"
3518"
3918" 411
8"
3718"
3118"
3318"
3518"
2234"
2134"
2134"
2034"
1934"
2034"
25000
Features:* Temperature Range : -425 Degree * Exposted Polyurethane Surface are coated with
* (-254 Degrees C ) to 275 Degrees F (135 Degrees C) Monolar Mastic.
* Medium or Heavy Load Capacity * Support Saddles are constructed in accordance
* Design Load are Based on a Safety Factor of 5 with the MSS - SP58 and the ASME B31 Piping
* Steel Surface Finish : Hot Dip Galvanized or painted Code Requirements.
* Support Saddle are constructed on High Density * Technical Specification: AAAT - CS - 2010
Polyurethane with Fiberglass Reinforced Composite. * For Unique Applications, Contact AAA Tech.
* Support Saddle restrains - Y movement. * Steel Component are constructed of A - 36 Steel
SWP - 360BC - DW - AG
33
AAA TECHNOLOGY AND SPECIALTIES CO., INC.
12" TYP.
6"1" TYP.
12" 18"
INSULATION
" W "
INS. THK.
BOP
A-307 OR B7
BOLT/ STUDS
O.D.
SINGLE WEAR PAD
INSULATION THICKNESS
PIPESIZE BOP O.D.
1 " 1-1 / 2 " 2 " 2-1 / 2 " 3 " 4 "
18000
19000
21000
22000
240
350
425
500
575
675
1200
2000
3000
5500
6000
7000
8000
9000
16000
514"2"
212"
3"
312"
4"
5"
6"
8"
10"
12"
14"
16"
18"
20"
24"
938"
1112"
1312"
1718"
6 516"
838"
1038"
1434"
1634"
7250
7750
8000
250
300
350
400
490
580
1050
1250
2300
2500
2900
4250
4750
5750
6250
6750
160
VERTICAL LOAD ( lbs)
" W "
10
TEE
4
4
6
8
10
12
12
14
18
18
20
22
22
24
26"
28"
30"
32"
34" 24000
8600 2436"
2750016000 28
42"
40"
2900016500 28
5 " 6 " 7 " 8 "MEDIUMDUTY
HEAVYDUTY
534"
838"
738"
1534"
1918"
2118"
2318"
2718"
2918"
3112"
3312"
3512"
3712"
3912"
4312"
4578"
BOP O.D. BOP O.D. BOP O.D. BOP O.D. BOP O.D. BOP O.D. BOP O.D. BOP O.D. BOP O.D.
614"
738"
738"
838"
938"
1212"
1818"
2018"
2218"
2418"
2818"
3018"
3212"
3412"
3612"
3812"
4012"
4478"
4678" 477
8" 4878" 497
8" 5178" 537
8" 5578" 577
8" 5978"
4578" 467
8" 4778" 537
8" 5578" 577
8"
4712" 491
2" 5112"451
2"4112"401
2"3912"
4378"
4212" 451
2" 4712" 491
2"4312"411
2" 5112" 531
2"
4912"431
2" 4712"451
2"4112"391
2"3812"371
2"
4712"
4512"
4318"
2934"
2734"
2534"
2334"
4512"
4312"
4118"
2734"
2534"
2334"
2134"
2034"
4312"
4112"
3918"
2534"
2334"
2134"
1934"
1834"
4112"
3912"
3718"
2334"
2134"
1934"
1734"
1634"
1534"
3912"
3712"
3518"
2134"
1934"
1734"
1534"
1434"
1312"
1312"
1212"
1212"
1112"
3712"
3512"
3318"
1934"
1734"
1534"
1312"
1212"
1112"
3612"
3412"
1834"
1634"
1434"
1312"
1112"
1038"
3512"
3312"
3118"
1734"
1534"
1312"
1112"
1038"
938"
838"
738"
TEE
TEE
TEE
TEE
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
6"
6"
6"
6"
6"
6"
6"
6"
738"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
838"
938"
1918"
2118"
2318"
2518"
2918"
4"
4"
4"
4"
4"
4"
4"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
938"
838"
938"
1038"
2018"
2218"
2418"
2618"
3018"
3218"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
1038"
938"
1038"
1112"
2118"
2318"
2518"
2718"
3118"
6"
6"
6"
6"
6"
6"
6"
8"
6"
6"
6"
6"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
2318"
2518"
2718"
2918"
3318"
4978"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
1434"
1312"
1434"
1534"
2518"
2718"
2918"
3118"
3518"
5178"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
1634"
1534"
1634"
1734"
1734"
2718"
2918"
3118"
3318"
3718"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
1834"
1734"
1834"
1934"
1934"
2918"
3118"
3318"
3518"
3918" 411
8"
3718"
3118"
3318"
3518"
2234"
2134"
2134"
2034"
1934"
2034"
25000
Features:* Temperature Range : -425 Degree * Exposted Polyurethane Surface are coated with
* (-254 Degrees C ) to 275 Degrees F (135 Degrees C) Monolar Mastic.
* Medium or Heavy Load Capacity * Support Saddles are constructed in accordance
* Design Load are Based on a Safety Factor of 5 with the MSS - SP58 and the ASME B31 Piping
* Steel Surface Finish : Hot Dip Galvanized or painted Code Requirements.
* Support Saddle are constructed on High Density * Technical Specification: AAAT - CS - 2010
Polyurethane with Fiberglass Reinforced Composite. * For Unique Applications, Contact AAA Tech.
* Support Saddle restrains - Y movement. * Steel Component are constructed of A - 36 Steel
DWP - 360BC - DW - AG
34
AAA TECHNOLOGY AND SPECIALTIES CO., INC.
DOUBLE WEAR PADDOUBLE WEAR PAD
12" TYP.
6"1" TYP.
12" 18"
INSULATION
" W "
INS. THK.
BOP
A-307 OR B7
BOLT/ STUDS
O.D.
INSULATION THICKNESS
PIPESIZE BOP O.D.
1 " 1-1 / 2 " 2 " 2-1 / 2 " 3 " 4 "
18000
19000
21000
22000
240
350
425
500
575
675
1200
2000
3000
5500
6000
7000
8000
9000
16000
514"2"
212"
3"
312"
4"
5"
6"
8"
10"
12"
14"
16"
18"
20"
24"
938"
1112"
1312"
1718"
6 516"
838"
1038"
1434"
1634"
7250
7750
8000
250
300
350
400
490
580
1050
1250
2300
2500
2900
4250
4750
5750
6250
6750
160
VERTICAL LOAD ( lbs)
" W "
10
TEE
4
4
6
8
10
12
12
14
18
18
20
22
22
24
26"
28"
30"
32"
34" 24000
8600 2436"
2750016000 28
42"
40"
2900016500 28
5 " 6 " 7 " 8 "MEDIUMDUTY
HEAVYDUTY
534"
838"
738"
1534"
1918"
2118"
2318"
2718"
2918"
3112"
3312"
3512"
3712"
3912"
4312"
4578"
BOP O.D. BOP O.D. BOP O.D. BOP O.D. BOP O.D. BOP O.D. BOP O.D. BOP O.D. BOP O.D.
614"
738"
738"
838"
938"
1212"
1818"
2018"
2218"
2418"
2818"
3018"
3212"
3412"
3612"
3812"
4012"
4478"
4678" 477
8" 4878" 497
8" 5178" 537
8" 5578" 577
8" 5978"
4578" 467
8" 4778" 537
8" 5578" 577
8"
4712" 491
2" 5112"451
2"4112"401
2"3912"
4378"
4212" 451
2" 4712" 491
2"4312"411
2" 5112" 531
2"
4912"431
2" 4712"451
2"4112"391
2"3812"371
2"
4712"
4512"
4318"
2934"
2734"
2534"
2334"
4512"
4312"
4118"
2734"
2534"
2334"
2134"
2034"
4312"
4112"
3918"
2534"
2334"
2134"
1934"
1834"
4112"
3912"
3718"
2334"
2134"
1934"
1734"
1634"
1534"
3912"
3712"
3518"
2134"
1934"
1734"
1534"
1434"
1312"
1312"
1212"
1212"
1112"
3712"
3512"
3318"
1934"
1734"
1534"
1312"
1212"
1112"
3612"
3412"
1834"
1634"
1434"
1312"
1112"
1038"
3512"
3312"
3118"
1734"
1534"
1312"
1112"
1038"
938"
838"
738"
TEE
TEE
TEE
TEE
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
6"
6"
6"
6"
6"
6"
6"
6"
738"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
838"
938"
1918"
2118"
2318"
2518"
2918"
4"
4"
4"
4"
4"
4"
4"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
938"
838"
938"
1038"
2018"
2218"
2418"
2618"
3018"
3218"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
1038"
938"
1038"
1112"
2118"
2318"
2518"
2718"
3118"
6"
6"
6"
6"
6"
6"
6"
8"
6"
6"
6"
6"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
2318"
2518"
2718"
2918"
3318"
4978"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
1434"
1312"
1434"
1534"
2518"
2718"
2918"
3118"
3518"
5178"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
1634"
1534"
1634"
1734"
1734"
2718"
2918"
3118"
3318"
3718"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
1834"
1734"
1834"
1934"
1934"
2918"
3118"
3318"
3518"
3918" 411
8"
3718"
3118"
3318"
3518"
2234"
2134"
2134"
2034"
1934"
2034"
25000
Features:* Temperature Range : -425 Degree * Exposted Polyurethane Surface are coated with
* (-254 Degrees C ) to 275 Degrees F (135 Degrees C) Monolar Mastic.
* Medium or Heavy Load Capacity * Support Saddles are constructed in accordance
* Design Load are Based on a Safety Factor of 5 with the MSS - SP58 and the ASME B31 Piping
* Steel Surface Finish : Hot Dip Galvanized or painted Code Requirements.
* Support Saddle are constructed on High Density * Technical Specification: AAAT - CS - 2010
Polyurethane with Fiberglass Reinforced Composite. * For Unique Applications, Contact AAA Tech.
* Support Saddle restrains - Y movement. * Steel Component are constructed of A - 36 Steel
SWP - 360BC - DW - ST
35
AAA TECHNOLOGY AND SPECIALTIES CO., INC.
12" TYP.
6"
1" TYP.
12" 18"
INSULATION
INS. THK.
BOP
A-307 OR B7
BOLT/ STUDS
O.D.
" W "
SINGLE WEAR PAD
INSULATION THICKNESS
PIPESIZE BOP O.D.
1 " 1-1 / 2 " 2 " 2-1 / 2 " 3 " 4 "
18000
19000
21000
22000
240
350
425
500
575
675
1200
2000
3000
5500
6000
7000
8000
9000
16000
514"2"
212"
3"
312"
4"
5"
6"
8"
10"
12"
14"
16"
18"
20"
24"
938"
1112"
1312"
1718"
6 516"
838"
1038"
1434"
1634"
7250
7750
8000
250
300
350
400
490
580
1050
1250
2300
2500
2900
4250
4750
5750
6250
6750
160
VERTICAL LOAD ( lbs)
" W "
10
TEE
4
4
6
8
10
12
12
14
18
18
20
22
22
24
26"
28"
30"
32"
34" 24000
8600 2436"
2750016000 28
42"
40"
2900016500 28
5 " 6 " 7 " 8 "MEDIUMDUTY
HEAVYDUTY
534"
838"
738"
1534"
1918"
2118"
2318"
2718"
2918"
3112"
3312"
3512"
3712"
3912"
4312"
4578"
BOP O.D. BOP O.D. BOP O.D. BOP O.D. BOP O.D. BOP O.D. BOP O.D. BOP O.D. BOP O.D.
614"
738"
738"
838"
938"
1212"
1818"
2018"
2218"
2418"
2818"
3018"
3212"
3412"
3612"
3812"
4012"
4478"
4678" 477
8" 4878" 497
8" 5178" 537
8" 5578" 577
8" 5978"
4578" 467
8" 4778" 537
8" 5578" 577
8"
4712" 491
2" 5112"451
2"4112"401
2"3912"
4378"
4212" 451
2" 4712" 491
2"4312"411
2" 5112" 531
2"
4912"431
2" 4712"451
2"4112"391
2"3812"371
2"
4712"
4512"
4318"
2934"
2734"
2534"
2334"
4512"
4312"
4118"
2734"
2534"
2334"
2134"
2034"
4312"
4112"
3918"
2534"
2334"
2134"
1934"
1834"
4112"
3912"
3718"
2334"
2134"
1934"
1734"
1634"
1534"
3912"
3712"
3518"
2134"
1934"
1734"
1534"
1434"
1312"
1312"
1212"
1212"
1112"
3712"
3512"
3318"
1934"
1734"
1534"
1312"
1212"
1112"
3612"
3412"
1834"
1634"
1434"
1312"
1112"
1038"
3512"
3312"
3118"
1734"
1534"
1312"
1112"
1038"
938"
838"
738"
TEE
TEE
TEE
TEE
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
6"
6"
6"
6"
6"
6"
6"
6"
738"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
838"
938"
1918"
2118"
2318"
2518"
2918"
4"
4"
4"
4"
4"
4"
4"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
938"
838"
938"
1038"
2018"
2218"
2418"
2618"
3018"
3218"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
1038"
938"
1038"
1112"
2118"
2318"
2518"
2718"
3118"
6"
6"
6"
6"
6"
6"
6"
8"
6"
6"
6"
6"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
2318"
2518"
2718"
2918"
3318"
4978"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
1434"
1312"
1434"
1534"
2518"
2718"
2918"
3118"
3518"
5178"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
1634"
1534"
1634"
1734"
1734"
2718"
2918"
3118"
3318"
3718"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
1834"
1734"
1834"
1934"
1934"
2918"
3118"
3318"
3518"
3918" 411
8"
3718"
3118"
3318"
3518"
2234"
2134"
2134"
2034"
1934"
2034"
25000
Features:* Temperature Range : -425 Degree * Exposted Polyurethane Surface are coated with
* (-254 Degrees C ) to 275 Degrees F (135 Degrees C) Monolar Mastic.
* Medium or Heavy Load Capacity * Support Saddles are constructed in accordance
* Design Load are Based on a Safety Factor of 5 with the MSS - SP58 and the ASME B31 Piping
* Steel Surface Finish : Hot Dip Galvanized or painted Code Requirements.
* Support Saddle are constructed on High Density * Technical Specification: AAAT - CS - 2010
Polyurethane with Fiberglass Reinforced Composite. * For Unique Applications, Contact AAA Tech.
* Support Saddle restrains - Y movement. * Steel Component are constructed of A - 36 Steel
DWP - 360BC - DW - ST
36
AAA TECHNOLOGY AND SPECIALTIES CO., INC.
DOUBLE WEAR PADDOUBLE WEAR PAD
12" TYP.
6"
1" TYP.
12" 18"
INSULATION
INS. THK.
BOP
A-307 OR B7
BOLT/ STUDS
O.D.
" W "
INSULATION THICKNESS
PIPESIZE BOP O.D.
1 " 1-1 / 2 " 2 " 2-1 / 2 " 3 " 4 "
18000
19000
21000
22000
240
350
425
500
575
675
1200
2000
3000
5500
6000
7000
8000
9000
16000
514"2"
212"
3"
312"
4"
5"
6"
8"
10"
12"
14"
16"
18"
20"
24"
938"
1112"
1312"
1718"
6 516"
838"
1038"
1434"
1634"
7250
7750
8000
250
300
350
400
490
580
1050
1250
2300
2500
2900
4250
4750
5750
6250
6750
160
VERTICAL LOAD ( lbs)
" W "
10
TEE
4
4
6
8
10
12
12
14
18
18
20
22
22
24
26"
28"
30"
32"
34" 24000
8600 2436"
2750016000 28
42"
40"
2900016500 28
5 " 6 " 7 " 8 "MEDIUMDUTY
HEAVYDUTY
534"
838"
738"
1534"
1918"
2118"
2318"
2718"
2918"
3112"
3312"
3512"
3712"
3912"
4312"
4578"
BOP O.D. BOP O.D. BOP O.D. BOP O.D. BOP O.D. BOP O.D. BOP O.D. BOP O.D. BOP O.D.
614"
738"
738"
838"
938"
1212"
1818"
2018"
2218"
2418"
2818"
3018"
3212"
3412"
3612"
3812"
4012"
4478"
4678" 477
8" 4878" 497
8" 5178" 537
8" 5578" 577
8" 5978"
4578" 467
8" 4778" 537
8" 5578" 577
8"
4712" 491
2" 5112"451
2"4112"401
2"3912"
4378"
4212" 451
2" 4712" 491
2"4312"411
2" 5112" 531
2"
4912"431
2" 4712"451
2"4112"391
2"3812"371
2"
4712"
4512"
4318"
2934"
2734"
2534"
2334"
4512"
4312"
4118"
2734"
2534"
2334"
2134"
2034"
4312"
4112"
3918"
2534"
2334"
2134"
1934"
1834"
4112"
3912"
3718"
2334"
2134"
1934"
1734"
1634"
1534"
3912"
3712"
3518"
2134"
1934"
1734"
1534"
1434"
1312"
1312"
1212"
1212"
1112"
3712"
3512"
3318"
1934"
1734"
1534"
1312"
1212"
1112"
3612"
3412"
1834"
1634"
1434"
1312"
1112"
1038"
3512"
3312"
3118"
1734"
1534"
1312"
1112"
1038"
938"
838"
738"
TEE
TEE
TEE
TEE
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
6"
6"
6"
6"
6"
6"
6"
6"
738"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
838"
938"
1918"
2118"
2318"
2518"
2918"
4"
4"
4"
4"
4"
4"
4"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
938"
838"
938"
1038"
2018"
2218"
2418"
2618"
3018"
3218"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
1038"
938"
1038"
1112"
2118"
2318"
2518"
2718"
3118"
6"
6"
6"
6"
6"
6"
6"
8"
6"
6"
6"
6"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
2318"
2518"
2718"
2918"
3318"
4978"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
1434"
1312"
1434"
1534"
2518"
2718"
2918"
3118"
3518"
5178"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
1634"
1534"
1634"
1734"
1734"
2718"
2918"
3118"
3318"
3718"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
1834"
1734"
1834"
1934"
1934"
2918"
3118"
3318"
3518"
3918" 411
8"
3718"
3118"
3318"
3518"
2234"
2134"
2134"
2034"
1934"
2034"
25000
SWP - 360BC - DW - AG & ST
Features:* Temperature Range : -425 Degree * Exposted Polyurethane Surface are coated with
* (-254 Degrees C ) to 275 Degrees F (135 Degrees C) Monolar Mastic.
* Medium or Heavy Load Capacity * Support Saddles are constructed in accordance
* Design Load are Based on a Safety Factor of 5 with the MSS - SP58 and the ASME B31 Piping
* Steel Surface Finish : Hot Dip Galvanized or painted Code Requirements.
* Support Saddle are constructed on High Density * Technical Specification: AAAT - CS - 2010
Polyurethane with Fiberglass Reinforced Composite. * For Unique Applications, Contact AAA Tech.
* Support Saddle restrains - Y movement. * Steel Component are constructed of A - 36 Steel
37
AAA TECHNOLOGY AND SPECIALTIES CO., INC.
12" TYP.
1" TYP.
INSULATION
6" 12" 18"
INS. THK.
BOP
A-307 OR B7
BOLT/ STUDS
O.D.
" W "
SINGLE WEAR PAD
INSULATION THICKNESS
PIPESIZE BOP O.D.
1 " 1-1 / 2 " 2 " 2-1 / 2 " 3 " 4 "
18000
19000
21000
22000
240
350
425
500
575
675
1200
2000
3000
5500
6000
7000
8000
9000
16000
514"2"
212"
3"
312"
4"
5"
6"
8"
10"
12"
14"
16"
18"
20"
24"
938"
1112"
1312"
1718"
6 516"
838"
1038"
1434"
1634"
7250
7750
8000
250
300
350
400
490
580
1050
1250
2300
2500
2900
4250
4750
5750
6250
6750
160
VERTICAL LOAD ( lbs)
" W "
10
TEE
4
4
6
8
10
12
12
14
18
18
20
22
22
24
26"
28"
30"
32"
34" 24000
8600 2436"
2750016000 28
42"
40"
2900016500 28
5 " 6 " 7 " 8 "MEDIUMDUTY
HEAVYDUTY
534"
838"
738"
1534"
1918"
2118"
2318"
2718"
2918"
3112"
3312"
3512"
3712"
3912"
4312"
4578"
BOP O.D. BOP O.D. BOP O.D. BOP O.D. BOP O.D. BOP O.D. BOP O.D. BOP O.D. BOP O.D.
614"
738"
738"
838"
938"
1212"
1818"
2018"
2218"
2418"
2818"
3018"
3212"
3412"
3612"
3812"
4012"
4478"
4678" 477
8" 4878" 497
8" 5178" 537
8" 5578" 577
8" 5978"
4578" 467
8" 4778" 537
8" 5578" 577
8"
4712" 491
2" 5112"451
2"4112"401
2"3912"
4378"
4212" 451
2" 4712" 491
2"4312"411
2" 5112" 531
2"
4912"431
2" 4712"451
2"4112"391
2"3812"371
2"
4712"
4512"
4318"
2934"
2734"
2534"
2334"
4512"
4312"
4118"
2734"
2534"
2334"
2134"
2034"
4312"
4112"
3918"
2534"
2334"
2134"
1934"
1834"
4112"
3912"
3718"
2334"
2134"
1934"
1734"
1634"
1534"
3912"
3712"
3518"
2134"
1934"
1734"
1534"
1434"
1312"
1312"
1212"
1212"
1112"
3712"
3512"
3318"
1934"
1734"
1534"
1312"
1212"
1112"
3612"
3412"
1834"
1634"
1434"
1312"
1112"
1038"
3512"
3312"
3118"
1734"
1534"
1312"
1112"
1038"
938"
838"
738"
TEE
TEE
TEE
TEE
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
6"
6"
6"
6"
6"
6"
6"
6"
738"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
838"
938"
1918"
2118"
2318"
2518"
2918"
4"
4"
4"
4"
4"
4"
4"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
938"
838"
938"
1038"
2018"
2218"
2418"
2618"
3018"
3218"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
1038"
938"
1038"
1112"
2118"
2318"
2518"
2718"
3118"
6"
6"
6"
6"
6"
6"
6"
8"
6"
6"
6"
6"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
2318"
2518"
2718"
2918"
3318"
4978"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
1434"
1312"
1434"
1534"
2518"
2718"
2918"
3118"
3518"
5178"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
1634"
1534"
1634"
1734"
1734"
2718"
2918"
3118"
3318"
3718"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
1834"
1734"
1834"
1934"
1934"
2918"
3118"
3318"
3518"
3918" 411
8"
3718"
3118"
3318"
3518"
2234"
2134"
2134"
2034"
1934"
2034"
25000
Features:* Temperature Range : -425 Degree * Exposted Polyurethane Surface are coated with
* (-254 Degrees C ) to 275 Degrees F (135 Degrees C) Monolar Mastic.
* Medium or Heavy Load Capacity * Support Saddles are constructed in accordance
* Design Load are Based on a Safety Factor of 5 with the MSS - SP58 and the ASME B31 Piping
* Steel Surface Finish : Hot Dip Galvanized or painted Code Requirements.
* Support Saddle are constructed on High Density * Technical Specification: AAAT - CS - 2010
Polyurethane with Fiberglass Reinforced Composite. * For Unique Applications, Contact AAA Tech.
* Support Saddle restrains - Y movement. * Steel Component are constructed of A - 36 Steel
38
AAA TECHNOLOGY AND SPECIALTIES CO., INC.
DOUBLE WEAR PADDOUBLE WEAR PAD
12" TYP.
1" TYP.
INSULATION
6" 12" 18"
INS. THK.
BOP
A-307 OR B7
BOLT/ STUDS
O.D.
" W "
INSULATION THICKNESS
PIPESIZE BOP O.D.
1 " 1-1 / 2 " 2 " 2-1 / 2 " 3 " 4 "
18000
19000
21000
22000
240
350
425
500
575
675
1200
2000
3000
5500
6000
7000
8000
9000
16000
514"2"
212"
3"
312"
4"
5"
6"
8"
10"
12"
14"
16"
18"
20"
24"
938"
1112"
1312"
1718"
6 516"
838"
1038"
1434"
1634"
7250
7750
8000
250
300
350
400
490
580
1050
1250
2300
2500
2900
4250
4750
5750
6250
6750
160
VERTICAL LOAD ( lbs)
" W "
10
TEE
4
4
6
8
10
12
12
14
18
18
20
22
22
24
26"
28"
30"
32"
34" 24000
8600 2436"
2750016000 28
42"
40"
2900016500 28
5 " 6 " 7 " 8 "MEDIUMDUTY
HEAVYDUTY
534"
838"
738"
1534"
1918"
2118"
2318"
2718"
2918"
3112"
3312"
3512"
3712"
3912"
4312"
4578"
BOP O.D. BOP O.D. BOP O.D. BOP O.D. BOP O.D. BOP O.D. BOP O.D. BOP O.D. BOP O.D.
614"
738"
738"
838"
938"
1212"
1818"
2018"
2218"
2418"
2818"
3018"
3212"
3412"
3612"
3812"
4012"
4478"
4678" 477
8" 4878" 497
8" 5178" 537
8" 5578" 577
8" 5978"
4578" 467
8" 4778" 537
8" 5578" 577
8"
4712" 491
2" 5112"451
2"4112"401
2"3912"
4378"
4212" 451
2" 4712" 491
2"4312"411
2" 5112" 531
2"
4912"431
2" 4712"451
2"4112"391
2"3812"371
2"
4712"
4512"
4318"
2934"
2734"
2534"
2334"
4512"
4312"
4118"
2734"
2534"
2334"
2134"
2034"
4312"
4112"
3918"
2534"
2334"
2134"
1934"
1834"
4112"
3912"
3718"
2334"
2134"
1934"
1734"
1634"
1534"
3912"
3712"
3518"
2134"
1934"
1734"
1534"
1434"
1312"
1312"
1212"
1212"
1112"
3712"
3512"
3318"
1934"
1734"
1534"
1312"
1212"
1112"
3612"
3412"
1834"
1634"
1434"
1312"
1112"
1038"
3512"
3312"
3118"
1734"
1534"
1312"
1112"
1038"
938"
838"
738"
TEE
TEE
TEE
TEE
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
6"
6"
6"
6"
6"
6"
6"
6"
738"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
4"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
838"
938"
1918"
2118"
2318"
2518"
2918"
4"
4"
4"
4"
4"
4"
4"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
938"
838"
938"
1038"
2018"
2218"
2418"
2618"
3018"
3218"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
1038"
938"
1038"
1112"
2118"
2318"
2518"
2718"
3118"
6"
6"
6"
6"
6"
6"
6"
8"
6"
6"
6"
6"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
2318"
2518"
2718"
2918"
3318"
4978"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
1434"
1312"
1434"
1534"
2518"
2718"
2918"
3118"
3518"
5178"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
1634"
1534"
1634"
1734"
1734"
2718"
2918"
3118"
3318"
3718"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
1834"
1734"
1834"
1934"
1934"
2918"
3118"
3318"
3518"
3918" 411
8"
3718"
3118"
3318"
3518"
2234"
2134"
2134"
2034"
1934"
2034"
25000
DWP - 360BC - DW - AG & ST
SWP - 180 - H CV
Features:* Temperature Range : -425 Degree * Exposted Polyurethane Surface are coated with
* (-254 Degrees C ) to 275 Degrees F (135 Degrees C) Monolar Mastic.
* Light or Medium Load Capacity * Support Saddles are constructed in accordance
* Design Load are Based on a Safety Factor of 5 with the MSS - SP58 and the ASME B31 Piping
* Steel Surface Finish : Hot Dip Galvanized or painted Code Requirements.
* Support Saddle are constructed on High Density * Technical Specification: AAAT - CS - 2010
Polyurethane with Fiberglass Reinforced Composite. * For Unique Applications, Contact AAA Tech.
* Support Saddle restrains - Y movement. * Steel Component are constructed of A - 36 Steel
39
AAA TECHNOLOGY AND SPECIALTIES CO., INC.
"F"
INS. THK.
O.D.
INSULATION1" TYP.
SINGLE WEAR PAD
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
3/8"
3/8"
INSULATION THICKNESS
PIPESIZE
Pad THK.
1 / 2 "
F O.D.
3 / 4 "
F O.D.
1 "
F O.D.
1-1 / 2 "
F O.D.
2 "
F O.D.
2-1 / 2 "
F O.D.
3 "
F O.D.
3-1 / 2 "
F O.D.
4 "
F O.D.
925
975
1040
1160
45
55
85
105
155
185
225
275
345
415
530
610
690
775
845
885
1/4"
114"
1"
34"
12" 12 2
2
238"
24
18
112"
2"
212"
3"
312"
4"
5"
6"
8"
10"
12"
14"
16"
18"
20"
24"
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
1818181818 18
18 18 18 18 18 18 18
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
238"
278"
312"
4"
412"
5"
5 916"
238"
278"
278"
312"
312"
4"
412"
5"
5 916"
658"
278"
278"
312"
312"
4"
412"
5"
658"
658"
512"
758"
858"
4"
412"
4"
5"
5"
5 916"
658"
658"
758"
758"
858"
958"
27"
23"
21"
19"
17"
16"
14"
1134"
5"
5"
5 916"
5 916"
658"
658"
758"
758"
858"
858"
958"
1034"
1234"
17"
15"
18"
20"
22"
24"
28"
658"
658"
658"
658"
758"
758"
858"
858"
958"
958"
1034"
1134"
16"
14"
18"
19"
23"
21"
25"
29"
758"
758"
758"
758"
858"
858"
958"
958"
1034"
1034"
1134"
1234"
17"
15"
19"
20"
22"
24"
26"
30"
858"
858"
858"
858"
958"
958"
958"
958"
958"
958"
1034"
1034"
1034"
1034"
1134"
1134"
1134"
1134"
1234"
1234"
1234"
14"
14"
16"
15"
18"
20"
21"
23"
25"
27"
31" 32"
28"
26"
24"
22"
21"
17"
19"
LIGHTDUTY
MEDIUMDUTY
775
835
925
45
65
85
120
155
185
215
275
335
435
495
555
615
675
700
750
35
VERTICAL LOAD ( lbs)
DWP - 180 - H CV
Features:* Temperature Range : -425 Degree * Exposted Polyurethane Surface are coated with
* (-254 Degrees C ) to 275 Degrees F (135 Degrees C) Monolar Mastic.
* Light or Medium Load Capacity * Support Saddles are constructed in accordance
* Design Load are Based on a Safety Factor of 5 with the MSS - SP58 and the ASME B31 Piping
* Steel Surface Finish : Hot Dip Galvanized or painted Code Requirements.
* Support Saddle are constructed on High Density * Technical Specification: AAAT - CS - 2010
Polyurethane with Fiberglass Reinforced Composite. * For Unique Applications, Contact AAA Tech.
* Support Saddle restrains - Y movement. * Steel Component are constructed of A - 36 Steel
40
AAA TECHNOLOGY AND SPECIALTIES CO., INC.
DOUBLE WEAR PADDOUBLE WEAR PAD
"F"
INS. THK.
O.D.
INSULATION1" TYP.
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
3/8"
3/8"
INSULATION THICKNESS
PIPESIZE
Pad THK.
1 / 2 "
F O.D.
3 / 4 "
F O.D.
1 "
F O.D.
1-1 / 2 "
F O.D.
2 "
F O.D.
2-1 / 2 "
F O.D.
3 "
F O.D.
3-1 / 2 "
F O.D.
4 "
F O.D.
925
975
1040
1160
45
55
85
105
155
185
225
275
345
415
530
610
690
775
845
885
1/4"
114"
1"
34"
12" 12 2
2
238"
24
18
112"
2"
212"
3"
312"
4"
5"
6"
8"
10"
12"
14"
16"
18"
20"
24"
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
1818181818 18
18 18 18 18 18 18 18
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
238"
278"
312"
4"
412"
5"
5 916"
238"
278"
278"
312"
312"
4"
412"
5"
5 916"
658"
278"
278"
312"
312"
4"
412"
5"
658"
658"
512"
758"
858"
4"
412"
4"
5"
5"
5 916"
658"
658"
758"
758"
858"
958"
27"
23"
21"
19"
17"
16"
14"
1134"
5"
5"
5 916"
5 916"
658"
658"
758"
758"
858"
858"
958"
1034"
1234"
17"
15"
18"
20"
22"
24"
28"
658"
658"
658"
658"
758"
758"
858"
858"
958"
958"
1034"
1134"
16"
14"
18"
19"
23"
21"
25"
29"
758"
758"
758"
758"
858"
858"
958"
958"
1034"
1034"
1134"
1234"
17"
15"
19"
20"
22"
24"
26"
30"
858"
858"
858"
858"
958"
958"
958"
958"
958"
958"
1034"
1034"
1034"
1034"
1134"
1134"
1134"
1134"
1234"
1234"
1234"
14"
14"
16"
15"
18"
20"
21"
23"
25"
27"
31" 32"
28"
26"
24"
22"
21"
17"
19"
LIGHTDUTY
MEDIUMDUTY
775
835
925
45
65
85
120
155
185
215
275
335
435
495
555
615
675
700
750
35
VERTICAL LOAD ( lbs)
SWP - 360 - HC
Features:* Temperature Range : -425 Degree * Exposted Polyurethane Surface are coated with
* (-254 Degrees C ) to 275 Degrees F (135 Degrees C) Monolar Mastic.
* Light or Medium Load Capacity * Support Saddles are constructed in accordance
* Design Load are Based on a Safety Factor of 5 with the MSS - SP58 and the ASME B31 Piping
* Steel Surface Finish : Hot Dip Galvanized or painted Code Requirements.
* Support Saddle are constructed on High Density * Technical Specification: AAAT - CS - 2010
Polyurethane with Fiberglass Reinforced Composite. * For Unique Applications, Contact AAA Tech.
* Support Saddle restrains - Y movement. * Steel Component are constructed of A - 36 Steel
41
AAA TECHNOLOGY AND SPECIALTIES CO., INC.
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
3/8"
3/8"
INSULATION THICKNESS
PIPESIZE
Pad THK.
1 / 2 "
F O.D.
3 / 4 "
F O.D.
1 "
F O.D.
1-1 / 2 "
F O.D.
2 "
F O.D.
2-1 / 2 "
F O.D.
3 "
F O.D.
3-1 / 2 "
F O.D.
4 "
F O.D.
925
975
1040
1160
45
55
85
105
155
185
225
275
345
415
530
610
690
775
845
885
1/4"
114"
1"
34"
12" 12 2
2
238"
24
18
112"
2"
212"
3"
312"
4"
5"
6"
8"
10"
12"
14"
16"
18"
20"
24"
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
1818181818 18
18 18 18 18 18 18 18
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
238"
278"
312"
4"
412"
5"
5 916"
238"
278"
278"
312"
312"
4"
412"
5"
5 916"
658"
278"
278"
312"
312"
4"
412"
5"
658"
658"
512"
758"
858"
4"
412"
4"
5"
5"
5 916"
658"
658"
758"
758"
858"
958"
27"
23"
21"
19"
17"
16"
14"
1134"
5"
5"
5 916"
5 916"
658"
658"
758"
758"
858"
858"
958"
1034"
1234"
17"
15"
18"
20"
22"
24"
28"
658"
658"
658"
658"
758"
758"
858"
858"
958"
958"
1034"
1134"
16"
14"
18"
19"
23"
21"
25"
29"
758"
758"
758"
758"
858"
858"
958"
958"
1034"
1034"
1134"
1234"
17"
15"
19"
20"
22"
24"
26"
30"
858"
858"
858"
858"
958"
958"
958"
958"
958"
958"
1034"
1034"
1034"
1034"
1134"
1134"
1134"
1134"
1234"
1234"
1234"
14"
14"
16"
15"
18"
20"
21"
23"
25"
27"
31" 32"
28"
26"
24"
22"
21"
17"
19"
LIGHTDUTY
MEDIUMDUTY
775
835
925
45
65
85
120
155
185
215
275
335
435
495
555
615
675
700
750
35
VERTICAL LOAD ( lbs)
"F"
INS. THK.
O.D.
INSULATION
1" TYP.
SINGLE WEAR PAD
DWP - 360 - HC
Features:* Temperature Range : -425 Degree * Exposted Polyurethane Surface are coated with
* (-254 Degrees C ) to 275 Degrees F (135 Degrees C) Monolar Mastic.
* Light or Medium Load Capacity * Support Saddles are constructed in accordance
* Design Load are Based on a Safety Factor of 5 with the MSS - SP58 and the ASME B31 Piping
* Steel Surface Finish : Hot Dip Galvanized or painted Code Requirements.
* Support Saddle are constructed on High Density * Technical Specification: AAAT - CS - 2010
Polyurethane with Fiberglass Reinforced Composite. * For Unique Applications, Contact AAA Tech.
* Support Saddle restrains - Y movement. * Steel Component are constructed of A - 36 Steel
42
AAA TECHNOLOGY AND SPECIALTIES CO., INC.
"F"
INS. THK.
O.D.
INSULATION
1" TYP.
DOUBLE WEAR PADDOUBLE WEAR PAD
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
3/8"
3/8"
INSULATION THICKNESS
PIPESIZE
Pad THK.
1 / 2 "
F O.D.
3 / 4 "
F O.D.
1 "
F O.D.
1-1 / 2 "
F O.D.
2 "
F O.D.
2-1 / 2 "
F O.D.
3 "
F O.D.
3-1 / 2 "
F O.D.
4 "
F O.D.
925
975
1040
1160
45
55
85
105
155
185
225
275
345
415
530
610
690
775
845
885
1/4"
114"
1"
34"
12" 12 2
2
238"
24
18
112"
2"
212"
3"
312"
4"
5"
6"
8"
10"
12"
14"
16"
18"
20"
24"
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
1818181818 18
18 18 18 18 18 18 18
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
238"
278"
312"
4"
412"
5"
5 916"
238"
278"
278"
312"
312"
4"
412"
5"
5 916"
658"
278"
278"
312"
312"
4"
412"
5"
658"
658"
512"
758"
858"
4"
412"
4"
5"
5"
5 916"
658"
658"
758"
758"
858"
958"
27"
23"
21"
19"
17"
16"
14"
1134"
5"
5"
5 916"
5 916"
658"
658"
758"
758"
858"
858"
958"
1034"
1234"
17"
15"
18"
20"
22"
24"
28"
658"
658"
658"
658"
758"
758"
858"
858"
958"
958"
1034"
1134"
16"
14"
18"
19"
23"
21"
25"
29"
758"
758"
758"
758"
858"
858"
958"
958"
1034"
1034"
1134"
1234"
17"
15"
19"
20"
22"
24"
26"
30"
858"
858"
858"
858"
958"
958"
958"
958"
958"
958"
1034"
1034"
1034"
1034"
1134"
1134"
1134"
1134"
1234"
1234"
1234"
14"
14"
16"
15"
18"
20"
21"
23"
25"
27"
31" 32"
28"
26"
24"
22"
21"
17"
19"
LIGHTDUTY
MEDIUMDUTY
775
835
925
45
65
85
120
155
185
215
275
335
435
495
555
615
675
700
750
35
VERTICAL LOAD ( lbs)
SWP -90 - FS
Features:* Temperature Range : -425 Degree * Exposted Polyurethane Surface are coated with
* (-254 Degrees C ) to 275 Degrees F (135 Degrees C) Monolar Mastic.
* Medium or Heavy Load Capacity * Support Saddles are constructed in accordance
* Design Load are Based on a Safety Factor of 5 with the MSS - SP58 and the ASME B31 Piping
* Steel Surface Finish : Hot Dip Galvanized or painted Code Requirements.
* Support Saddle are constructed on High Density * Technical Specification: AAAT - CS - 2010
Polyurethane with Fiberglass Reinforced Composite. * For Unique Applications, Contact AAA Tech.
* Support Saddle restrains - Y movement.
43
AAA TECHNOLOGY AND SPECIALTIES CO., INC.
BOP
" W "
1" TYP.
6"
12"
18"
INS. THK.SINGLE WEAR PAD
FOAM WEAR PAD
INSULATION THICKNESS
PIPESIZE
1 "
BOP W
1-1 / 2 " 2 " 2-1 / 2 " 3 " 3-1 / 2 " 4 "
114"
1"
34"
12"
112"
2"
3"
4"
6"
8"
10"
12"
14"
16"
18"
20"
24"
4 678"
BOP W BOP W BOP W BOP W BOP W BOP W
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
6
6
6
6
6
6
6
12
6
6
6
6
6
6
6
6
6
6
678"
678"
678"
758"
758"
858"
9
1058"
1312"
1478"
1558"
17
1812"
1978"
2234"
512"
614"
614"
9
1058"
12
1312"
1558"
17
1812"
2114"
614"
614"
614"
614"
678"
678"
8
838"
10
1138"
1234"
1414"
15
1638"
1734"
1918"
22
512"
512"
512"
718"
758"
1414"
434"
434"
434"
434"
512"
512"
612"
678"
838"
10
1138"
1234"
1312"
15
1638"
1734"
2058"
358"
358"
4
4
434"
434"
534"
618"
758"
9
1058"
12
1278"
1414"
1558"
17
1978"
278"
3
314"
358"
358"
4
5
512"
678"
838"
10
1138"
1218"
1312"
15
1638"
1918"
218"
218"
258"
212"
278"
314"
4
434"
618"
758"
918"
1012"
1138"
1278"
1414"
1558"
1812"
DWP -90 - FS
Features:* Temperature Range : -425 Degree * Exposted Polyurethane Surface are coated with
* (-254 Degrees C ) to 275 Degrees F (135 Degrees C) Monolar Mastic.
* Medium or Heavy Load Capacity * Support Saddles are constructed in accordance
* Design Load are Based on a Safety Factor of 5 with the MSS - SP58 and the ASME B31 Piping
* Steel Surface Finish : Hot Dip Galvanized or painted Code Requirements.
* Support Saddle are constructed on High Density * Technical Specification: AAAT - CS - 2010
Polyurethane with Fiberglass Reinforced Composite. * For Unique Applications, Contact AAA Tech.
* Support Saddle restrains - Y movement.
44
AAA TECHNOLOGY AND SPECIALTIES CO., INC.
DOUBLE WEAR PADDOUBLE WEAR PAD
FOAM WEAR PAD
BOP
" W "
1" TYP.
6"
12"
18"
INS. THK.
INSULATION THICKNESS
PIPESIZE
1 "
BOP W
1-1 / 2 " 2 " 2-1 / 2 " 3 " 3-1 / 2 " 4 "
114"
1"
34"
12"
112"
2"
3"
4"
6"
8"
10"
12"
14"
16"
18"
20"
24"
4 678"
BOP W BOP W BOP W BOP W BOP W BOP W
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
6
6
6
6
6
6
6
12
6
6
6
6
6
6
6
6
6
6
678"
678"
678"
758"
758"
858"
9
1058"
1312"
1478"
1558"
17
1812"
1978"
2234"
512"
614"
614"
9
1058"
12
1312"
1558"
17
1812"
2114"
614"
614"
614"
614"
678"
678"
8
838"
10
1138"
1234"
1414"
15
1638"
1734"
1918"
22
512"
512"
512"
718"
758"
1414"
434"
434"
434"
434"
512"
512"
612"
678"
838"
10
1138"
1234"
1312"
15
1638"
1734"
2058"
358"
358"
4
4
434"
434"
534"
618"
758"
9
1058"
12
1278"
1414"
1558"
17
1978"
278"
3
314"
358"
358"
4
5
512"
678"
838"
10
1138"
1218"
1312"
15
1638"
1918"
218"
218"
258"
212"
278"
314"
4
434"
618"
758"
918"
1012"
1138"
1278"
1414"
1558"
1812"
SWP -180 - FS
Features:* Temperature Range : -425 Degree * Exposted Polyurethane Surface are coated with
* (-254 Degrees C ) to 275 Degrees F (135 Degrees C) Monolar Mastic.
* Medium or Heavy Load Capacity * Support Saddles are constructed in accordance
* Design Load are Based on a Safety Factor of 5 with the MSS - SP58 and the ASME B31 Piping
* Steel Surface Finish : Hot Dip Galvanized or painted Code Requirements.
* Support Saddle are constructed on High Density * Technical Specification: AAAT - CS - 2010
Polyurethane with Fiberglass Reinforced Composite. * For Unique Applications, Contact AAA Tech.
* Support Saddle restrains - Y movement.
45
AAA TECHNOLOGY AND SPECIALTIES CO., INC.
BOP
" W "
1" TYP.
6"
12"
18"
INS. THK. DOUBLE WEAR PADDOUBLE WEAR PAD
FOAM WEAR PAD
INSULATION THICKNESS
PIPESIZE
1 "
BOP W
1-1 / 2 " 2 " 2-1 / 2 " 3 " 3-1 / 2 " 4 "
114"
1"
34"
12"
112"
2"
3"
4"
6"
8"
10"
12"
14"
16"
18"
20"
24"
4 678"
BOP W BOP W BOP W BOP W BOP W BOP W
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
6
6
6
6
6
6
6
12
6
6
6
6
6
6
6
6
6
6
678"
678"
678"
758"
758"
858"
9
1058"
1312"
1478"
1558"
17
1812"
1978"
2234"
512"
614"
614"
9
1058"
12
1312"
1558"
17
1812"
2114"
614"
614"
614"
614"
678"
678"
8
838"
10
1138"
1234"
1414"
15
1638"
1734"
1918"
22
512"
512"
512"
718"
758"
1414"
434"
434"
434"
434"
512"
512"
612"
678"
838"
10
1138"
1234"
1312"
15
1638"
1734"
2058"
358"
358"
4
4
434"
434"
534"
618"
758"
9
1058"
12
1278"
1414"
1558"
17
1978"
278"
3
314"
358"
358"
4
5
512"
678"
838"
10
1138"
1218"
1312"
15
1638"
1918"
218"
218"
258"
212"
278"
314"
4
434"
618"
758"
918"
1012"
1138"
1278"
1414"
1558"
1812"
DWP -180 - FS
Features:* Temperature Range : -425 Degree * Exposted Polyurethane Surface are coated with
* (-254 Degrees C ) to 275 Degrees F (135 Degrees C) Monolar Mastic.
* Medium or Heavy Load Capacity * Support Saddles are constructed in accordance
* Design Load are Based on a Safety Factor of 5 with the MSS - SP58 and the ASME B31 Piping
* Steel Surface Finish : Hot Dip Galvanized or painted Code Requirements.
* Support Saddle are constructed on High Density * Technical Specification: AAAT - CS - 2010
Polyurethane with Fiberglass Reinforced Composite. * For Unique Applications, Contact AAA Tech.
* Support Saddle restrains - Y movement.
46
AAA TECHNOLOGY AND SPECIALTIES CO., INC.
BOP
" W "
1" TYP.
6"
12"
18"
INS. THK. DOUBLE WEAR PADDOUBLE WEAR PAD
FOAM WEAR PAD
INSULATION THICKNESS
PIPESIZE
1 "
BOP W
1-1 / 2 " 2 " 2-1 / 2 " 3 " 3-1 / 2 " 4 "
114"
1"
34"
12"
112"
2"
3"
4"
6"
8"
10"
12"
14"
16"
18"
20"
24"
4 678"
BOP W BOP W BOP W BOP W BOP W BOP W
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
6
6
6
6
6
6
6
12
6
6
6
6
6
6
6
6
6
6
678"
678"
678"
758"
758"
858"
9
1058"
1312"
1478"
1558"
17
1812"
1978"
2234"
512"
614"
614"
9
1058"
12
1312"
1558"
17
1812"
2114"
614"
614"
614"
614"
678"
678"
8
838"
10
1138"
1234"
1414"
15
1638"
1734"
1918"
22
512"
512"
512"
718"
758"
1414"
434"
434"
434"
434"
512"
512"
612"
678"
838"
10
1138"
1234"
1312"
15
1638"
1734"
2058"
358"
358"
4
4
434"
434"
534"
618"
758"
9
1058"
12
1278"
1414"
1558"
17
1978"
278"
3
314"
358"
358"
4
5
512"
678"
838"
10
1138"
1218"
1312"
15
1638"
1918"
218"
218"
258"
212"
278"
314"
4
434"
618"
758"
918"
1012"
1138"
1278"
1414"
1558"
1812"
SWP -360 - FS
Features:* Temperature Range : -425 Degree * Exposted Polyurethane Surface are coated with
* (-254 Degrees C ) to 275 Degrees F (135 Degrees C) Monolar Mastic.
* Medium or Heavy Load Capacity * Support Saddles are constructed in accordance
* Design Load are Based on a Safety Factor of 5 with the MSS - SP58 and the ASME B31 Piping
* Steel Surface Finish : Hot Dip Galvanized or painted Code Requirements.
* Support Saddle are constructed on High Density * Technical Specification: AAAT - CS - 2010
Polyurethane with Fiberglass Reinforced Composite. * For Unique Applications, Contact AAA Tech.
* Support Saddle restrains - Y movement.
47
AAA TECHNOLOGY AND SPECIALTIES CO., INC.
BOP
" W "
1" TYP.
6"
12"
18"
INS. THK.
DOUBLE WEAR PADDOUBLE WEAR PAD
FOAM WEAR PAD
INSULATION THICKNESS
PIPESIZE
1 "
BOP W
1-1 / 2 " 2 " 2-1 / 2 " 3 " 3-1 / 2 " 4 "
114"
1"
34"
12"
112"
2"
3"
4"
6"
8"
10"
12"
14"
16"
18"
20"
24"
4 678"
BOP W BOP W BOP W BOP W BOP W BOP W
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
6
6
6
6
6
6
6
12
6
6
6
6
6
6
6
6
6
6
678"
678"
678"
758"
758"
858"
9
1058"
1312"
1478"
1558"
17
1812"
1978"
2234"
512"
614"
614"
9
1058"
12
1312"
1558"
17
1812"
2114"
614"
614"
614"
614"
678"
678"
8
838"
10
1138"
1234"
1414"
15
1638"
1734"
1918"
22
512"
512"
512"
718"
758"
1414"
434"
434"
434"
434"
512"
512"
612"
678"
838"
10
1138"
1234"
1312"
15
1638"
1734"
2058"
358"
358"
4
4
434"
434"
534"
618"
758"
9
1058"
12
1278"
1414"
1558"
17
1978"
278"
3
314"
358"
358"
4
5
512"
678"
838"
10
1138"
1218"
1312"
15
1638"
1918"
218"
218"
258"
212"
278"
314"
4
434"
618"
758"
918"
1012"
1138"
1278"
1414"
1558"
1812"
DWP -360 - FS
Features:* Temperature Range : -425 Degree * Exposted Polyurethane Surface are coated with
* (-254 Degrees C ) to 275 Degrees F (135 Degrees C) Monolar Mastic.
* Medium or Heavy Load Capacity * Support Saddles are constructed in accordance
* Design Load are Based on a Safety Factor of 5 with the MSS - SP58 and the ASME B31 Piping
* Steel Surface Finish : Hot Dip Galvanized or painted Code Requirements.
* Support Saddle are constructed on High Density * Technical Specification: AAAT - CS - 2010
Polyurethane with Fiberglass Reinforced Composite. * For Unique Applications, Contact AAA Tech.
* Support Saddle restrains - Y movement.
48
AAA TECHNOLOGY AND SPECIALTIES CO., INC.
BOP
" W "
1" TYP.
6"
12"
18"
INS. THK.
DOUBLE WEAR PADDOUBLE WEAR PAD
FOAM WEAR PAD
INSULATION THICKNESS
PIPESIZE
1 "
BOP W
1-1 / 2 " 2 " 2-1 / 2 " 3 " 3-1 / 2 " 4 "
114"
1"
34"
12"
112"
2"
3"
4"
6"
8"
10"
12"
14"
16"
18"
20"
24"
4 678"
BOP W BOP W BOP W BOP W BOP W BOP W
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
6
6
6
6
6
6
6
12
6
6
6
6
6
6
6
6
6
6
678"
678"
678"
758"
758"
858"
9
1058"
1312"
1478"
1558"
17
1812"
1978"
2234"
512"
614"
614"
9
1058"
12
1312"
1558"
17
1812"
2114"
614"
614"
614"
614"
678"
678"
8
838"
10
1138"
1234"
1414"
15
1638"
1734"
1918"
22
512"
512"
512"
718"
758"
1414"
434"
434"
434"
434"
512"
512"
612"
678"
838"
10
1138"
1234"
1312"
15
1638"
1734"
2058"
358"
358"
4
4
434"
434"
534"
618"
758"
9
1058"
12
1278"
1414"
1558"
17
1978"
278"
3
314"
358"
358"
4
5
512"
678"
838"
10
1138"
1218"
1312"
15
1638"
1918"
218"
218"
258"
212"
278"
314"
4
434"
618"
758"
918"
1012"
1138"
1278"
1414"
1558"
1812"
top related