trimble 2d & 3d grade control systems for dozers & graders presenters name
Post on 15-Jan-2016
219 Views
Preview:
TRANSCRIPT
Trimble 2D & 3D Grade Control Systems for Dozers & Graders
Presenters name
Trimble GCS for Dozers
Trimble offers the heavy and highway contractor the broadest range of Grade Control Systems in the industry from 2D laser-based to 3D GNSS or Total Station-based.
Trimble systems are rugged, easy to use, fully upgradeable and portable, and flexible enough to meet a wide range of application and jobsite requirements.
Trimble Grade Control Systems with automatic blade control maximizes dozer performance.
Whether grading simple pads and slopes or complex design surfaces and alignments the operator can get to grade at high speeds, without sacrificing grade control accuracy or quality of the final graded surface.
Trimble 2D Grade Control Systems for Dozers
Trimble GCS900 – 2D Dozer Configurations
Configuration Applications
Blade Slope Only Blade slope control for rough gradingFlat and sloping pads
Single Laser (Lift only)
Small housing pads, building sitesTennis courtsSports fieldsFinish grading
Single Laser and Blade Slope (Lift and tilt)
General site elevation controlRoad maintenanceSports fieldsFinish Grading
Dual Laser(Lift and Tilt)
Medium / Large commercial building sites and housing padsRoad ConstructionGolf coursesMaterial balancingFinish grading
Trimble 2D GCS900 for Dozers
Key System Features:•CB450 or CB460 full color graphical control box•Lift and tilt automatic blade control for controlling both the elevation and slope of the blade
•Linked mode operation which ties the lift and tilt functions together for greater speed and accuracy
•On-machine components are portable and can be used on other machine types, without software / firmware upgrades
•On-machine components are modular and can be added or removed depending upon application
•3-5 mm vertical accuracies•Systems are easily upgradeable to 3D
Trimble 2D GCS900 Dozer
CB460LR4101 or 2
VM4XX CB450 PM400AS400
-or-
Trimble 3D Grade Control Systems for Dozers
Trimble GCS900 – 3D Dozer ConfigurationsConfiguration Applications
Single GNSS and Blade SlopeRoads/highways -rough gradingLarge earthmoving projects - dams, reclamation, etc.Landfills/ waste depositsCommercial/residential site prep - pads, grading for large slabs, etc.Land reclamation projects
Dual GNSS Bulk EarthworksRoads/highways/railways - rough gradingLandfills, waste deposits, projects with steep slopesCommercial/residential site prep - complex designGolf course constructionEmbankments, retention ponds
Single / Dual GNSS with Laser Augmentation
Roads/highways/railways – fine gradingAirport construction – runways, tarmacsCommercial/residential site prep - complex designs, slabs, pads
Universal Total Station Roads/highways/railways – finished gradingAirport construction – runways, tarmacsCommercial/residential site prep - complex designsSubdivisions - pads, local infrastructure
Trimble 3D GCS900 Dozer
SNRx10
PM400
SNM940- or -
MS992 1 or 2
MT900- or - - or - MS992SR300
AS400 VM4xx CB460CB450
-or-
Trimble GCS900 3D GCS For DozersOff Machine Infrastructure
For the GCS900 2DAND
For the GCS900 3D with Laser
Augmentation
For the GCS900 3DWith GNSS
ORGNSS and Laser
Augmentation
For the GCS900 3DWith MT900
GL700 Grade Laser GNSS Base StationSPSx30 Universal
Total Station
Trimble 2D & 3D Grade Control Systems for Motor Graders
Trimble 2D GCS for Motor Graders
Trimble offers the heavy and highway contractor the broadest range of Grade Control Systems in the industry, from 2D laser or sonic based to 3D GNSS or Total Station based.
Trimble systems are rugged, easy to use, fully upgradeable and portable, and flexible enough to meet a wide range of application and jobsite requirements.
Trimble Grade Control Systems with automatic blade control maximizes motor grader performance.
Whether grading simple pads and slopes or complex design surfaces and alignments the operator can get to grade at high speeds, without sacrificing grade control accuracy or quality of the final graded surface.
Trimble 2D Grade Control Systems for Motor Graders
Trimble GCS900 - 2D Grader Configurations
Configuration Application
Cross Slope - only Road maintenanceRoad constructionSports fieldsEmbankmentsRoad ditches
Single or Dual Laser with Cross Slope
Small-to-large housing and building, padsMedium/large commercial sitesSports fieldsRoad constructionMaterial balancingHighway construction and maintenanceRunwaysEmbankmentsRoad ditches
Single or Dual Sonic with Cross Slope
Single sonic or single laser with cross slope
Trimble 2D GCS900 for Graders
Key System Features:
•CB450 or 460 full color graphical control – upgradeable to 3D•Simple cross slope-only configurations to combinations of single / dual laser and single / dual sonic tracers
•Lift and tilt automatic blade control control for controlling both the elevation and slope of the blade
•Angle sensors capable of 100% slopes•Left and right auto/manual and offset switches•On-machine components are portable between machine types, without software / firmware upgrades
•On-machine components are modular and can be added or removed depending upon application
•3-5 mm vertical accuracies•Systems are easily upgradeable to 3D
Trimble 2D GCS900 Grader
RS400
SR3001 or 2
LR4101 or 2
AS400 x2
ST4001 or 2
- or - - or -
PM400
VM4xx
CB460CB450
-or-
Trimble 3D Grade Control Systems for Motor Graders
Trimble GCS900 - 3D Grader Configurations
Configuration Application
Single GNSS and Cross Slope Roads/highways -rough gradingLarge earthmoving projects - dams, reclamation, etc.Landfills/ waste depositsCommercial/residential site prep - pads, grading for large slabs, etc.Land reclamation projects
Dual GNSS Bulk EarthworksRoads/highways/railways - rough gradingLandfills, waste deposits, projects with steep slopesCommercial/residential site prep - complex designGolf course constructionEmbankments, retention ponds
Trimble GCS900 - 3D Grader Configurations
Configuration Application
Single / Dual GNSS with Laser Augmentation
Roads/highways/railways – fine gradingAirport construction – runways, tarmacsCommercial/residential site prep - complex designs, slabs, pads
Universal Total Station and Cross Slope
Roads/highways/railways – finished gradingAirport construction – runways, tarmacsCommercial/residential site prep - complex designsSubdivisions - pads, local infrastructure
Trimble 3D GCS900 for Graders
Key System Features:
• CB450 or CB460 full color graphical control box – 2D and 3D capable• On-machine software available in 25 languages, configurable on-the-fly, with a button press
• Integrated smart GNSS antenna, cab and blade mountable, quick release mounting for removal
• Indicate or automatic blade control configurations• Auto-Sideshift of the motor grader blade supported• Dual GNSS blade mounted solution provides the most versatile grading solution on the market
• On-machine components are portable between machine types, without software / firmware upgrades
• On-machine components are modular and can be added or removed depending upon applications
• Multiple system configurations for fine and finished grade applications , depending upon project requirements – GNSS with Laser Augmentation and Universal Total Station based solutions
• Global solutions for two-way data transfer or synchronization of data between machine and office
Trimble 3D GCS900 Grader
ST400 Optional
SNM940
- and / or -
RS400MS9921 or 2
MT900AS400
x2 MS992SR300
- or - - or -
PM400VM4xx
SNRx10
CB460CB450
-or-
Trimble GCS900 3D GCS For Motor GradersOff Machine Infrastructure
For the GCS900 2DAND
For the GCS900 3D with Laser
Augmentation
For the GCS900 3DWith GNSS
ORGNSS and Laser
Augmentation
For the GCS900 3DWith MT900
GL700 Grade Laser GNSS Base StationSPSx30 Universal
Total Station
top related