trumpf course catalog ditzingen
Post on 04-Mar-2015
958 Views
Preview:
TRANSCRIPT
CustomerTraining
TruServices
Course Catalog
Iden
t N
o. 1
5985
60-1
0-08
-10-
F –
Subj
ect
to c
hang
e
TRUMPF Werkzeugmaschinen GmbH + Co. KG | Training Center DitzingenSchuckertstrasse 16 · 71254 Ditzingen · GermanyPhone +49(0)7156 303-30500· Fax +49(0)7156 303-930710E-Mail training@de.trumpf.com · Homepage www.mytrumpf.com/training/en
Machine Tools / Power Tools
Laser Technology / Electronics
Medical Technology
TRUMPF is certified according to ISO 9001:2008
(for further information see www.trumpf.com/en/quality)
2 3
There is one factor that is becoming increasingly important in
day-to-day competition: highly-qualified and motivated
employees. Training at TRUMPF contributes significantly to the
advancement and motivation of your staff. It provides them
with in-depth knowledge of our products. In addition to this,
our machine and programming courses foster an understand-
ing of the interactions as well as independent, solution-
oriented thinking.
Experienced instructors bring your employees up-to-date with
advances in technology. With the modern equipment in our
new Ditzingen Training Center and the perfect combination of
theory and hands-on exercises at the machine, learning is fun.
The most modern methods help us to address the individual
needs of our customers. Beginners and experienced users alike
acquire knowledge that quickly pays off. You cannot really
know how good a TRUMPF machine is until you are familiar
with its functions and capabilities.
You can check our latest schedules and course availability on
our website where you can also sign up for the courses.
The
advantage.knowledge
Contents:
Page 4 TruLaser
Page 12 TruMatic
Page 20 TruPunch
Page 28 TruBend Series 3000
Page 34 TruBend Series 5000 / 7000
Page 42 TruBend Series 8000
Page 46 TruLaser Tube
Page 52 TruLaser Cell
Page 58 TruLaser Robot
Page 66 Supplementary Courses
Page 74 Consulting / Seminars
ContactTRUMPF Training Center Ditzingen
Schuckertstrasse 16
71254 Ditzingen
Germany
Phone +49(0)7156 303-30500
Fax +49(0)7156 303-930710
E-Mail training@de.trumpf.com
www.mytrumpf.com/training/en
25%
40%
80%
100%
60%
65%
80%
100%
4 5
2D Laser Processing:
TruLaser
Machine TypesTruLaser 1030
TruLaser 2025 | 2030
TruLaser 2525
TruLaser 3030 | 3040 | 3060
TruLaser 3030 (L20) | 3040 (L32)
TruLaser 3530 classic
TruLaser 5030 | 5040 (L18) |
5060 (L19)
TruLaser 5030 classic | 5040 | 5060
TruLaser 5030 fiber
TruLaser 7025 | 7040
TruLaser 7025 fiber | 7040 fiber
TruLaser 8000
Core Programming Courses Basic Programming
TruTops Laser Drawing and Nesting
TruTops Laser Technology
TruTops Laser Pro
Core Machine Courses Operator
Technology Laser Cutting
Maintenance
TruLaser machines stand for decades of experience and
pioneering innovations in laser cutting. The outstanding
feature of our machines is that they work on the principle of
"flying optics". Thanks to this technology, you not only
achieve high machining speeds and accuracy but also make
the best possible use of your material.
To help you tap into the full potential of your machine, we
have put together a multi-faceted training program. In the
various course modules, you learn not only the basics, but
also acquire in-depth knowledge of special applications that
are tailored to our products. This ensures that you get
maximum use out of your machine.
The above diagram shows the sequence in which the courses should be taken, the
level of knowledge you will attain and the length of each course. Course modules
highlighted in blue provide programming knowledge. Courses highlighted in green
help unlock your machine's potential and keep it in top form. In the darker boxes,
you will find optional courses that expand your knowledge in special fields. Training
schedules and course descriptions are listed on the following pages.
Programming Courses TruTops TubeTechnology
3 days
TruTops LaserDrawing and Nesting
2.5 days
TruTops LaserTechnology
3 days
TruTops LaserAutomation
2 days
3D Tube Design2 / 5 days
TruTops LaserPro
2 days
expertise
TruTops LaserUpdate
1 day
Mac
hine
inst
alla
tion
and
star
t-up
Operator CourseRotoLas
2 days
Shop FloorProgramming
2 days
Maintenance Laser
Application Consulting
Application Consulting
expertise
time t
Operator Course3 / 5 days
TechnologyLaser Cutting
3 days
Maintenance Course3 / 4 days
Instruction on-site
Basic Programming Course1.5 days
> 3 months
Machine Courses
Mac
hine
pur
chas
e
Core Programming Courses Core Machine Courses Optional Courses Application Consulting
Tru
Lase
r
6 7
TruLaser Programming Courses
PrerequisitesPC knowledge
SubjectsDesign and functionality of a laser ma- chine | laser cutting variants (laser cutting, marking, dot marking etc.) | processing strategies for different materials and sheet thicknesses | optimization of laser pro- cessing
ObjectivesYou will acquire basic technological knowledge necessary for TruTops Laser programming. This training course provides the basic knowledge required for the participation in the "TruTops Laser Technol-ogy" training course.
Duration of Training Course1.5 days
Basic Programming
2D Laser Machine
PrerequisitesPC knowledge
This training course is not required in case of prior knowledge of "TruTops Punch Drawing and Nesting"
SubjectsModular software structure | introduction to operating systems | drawing of workpiece geometries | reading in and preparing DXF, IGES and MI drawings | creating mini- nests | manual and job-related nesting of parts geometries on sheets
ObjectivesYou will be able to draw part geometries, import external-format drawings in TruTops and to create a sheet layout. This training course provides the basic knowledge required for the participation in the "TruTops Laser Technology" training course.
Duration of Training Course2.5 days
TruTops Laser Drawing and Nesting
PrerequisitesParticipation in the basic training course to program your machine (or: comprehensive experience in operating the respective machine) Participation in a "Drawing and Nesting" TruTops training course
SubjectsProgramming laser processes (single part, blank, sheet metal and slitting cut) | optimizing processing | creating NC programs | maintenance and adap-tation of the data base
ObjectivesYou will be able to determine processing strategies and create practical programs. In the case of available automation components, participation in a "TruTops Laser Automation" training course is required.
Duration of Training Course3 days
TruTops Laser Technology
PrerequisitesParticipation in the training course “TruTops Laser Technology”
SubjectsMachine components and technical data of automation components | loading and unloading strategies | program auto- mation components | interpretation of NC programs
ObjectivesYou will be able to program automation sequences.
Duration of Training Course2 days
TruTops Laser Automation for SortMaster / LiftMaster Store + Sort
PrerequisitesParticipation in the training course "TruTops Laser Technology" and TruTops Laser programming experience (at least 3 - 6 months)
SubjectsAdopt external data | cutting up scrap | preparation of geometries | use of fixtures | form GMT (geometry with technology) and nesting | create and use customer cycles | manipulate NC texts | create technology tables and rules | your questions
ObjectivesYou will be able to use TruTops functions more efficiently, to increase process reliability on the machine as well as to reduce part cycle times.
Duration of Training Course2 days
TruTops Laser Pro
PrerequisitesParticipation in the TruTops training courses "Drawing and Nesting" and " TruTops Laser Technology"
SubjectsTechnology of tube cutting | modular software structure | programming round and/or rectangular tubes and free profiles | drawing developed contours or developed as DXF, IGES and MI on the tube | pro- gramming and optimizing the processing | creating NC programs
ObjectivesYou will be able to create cutting ge-ometries for tube processing and to create practical NC programs.
Duration of Training Course3 days
TruTops Tube Technologyfor RotoLas2D Laser Machine
TruLaser Machine Courses
PrerequisitesTechnically-oriented vocational training
SubjectsMachine discussion | structure and machine components | structure and adjustment of laser cutting head | training the user inter-face, operating elements and operating sequences with exercises | presentation of the diagnostics system | program manage-ment | machine options
ObjectivesYou will be able to reliably handle the machine’s operating elements and to prepare, initiate and influence the production process.
Duration of Training Course3 / 5 days
Operator Course
2D Laser Machine
PrerequisitesParticipation in an operator’s training course for a TRUMPF 2D laser machine
SubjectsDesign and function of the tube cutting system | explanation and use of operating elements | set-up jobs | operational se-quences for the tube cutting system | run programs | influence cutting quality, different clamping techniques | processing with tube bearing
ObjectivesYou will be able to prepare the tube cutting system for processing, to operate it and to process programs.
Duration of Training Course2 days
Operator Course RotoLas
2D Laser Machiner
Machine typesTruLaser Series 2000 / 3000 / 5000 / 7000 / 8000 not for TruLaser 1030 / 3030 (L20) / 3040 (L32) / 5030 fiber (see following page)
PrerequisitesExperience in operating the respective machine (or: participation in the basic training course to program your machine)
This trainig course is not required for those with TruTops Laser programming experience
SubjectsDrawing workpiece geometries | sheet layout | programming of laser processing | optimize processing | creating NC programs
ObjectivesYou will be able to draw workpieces, select appropriate processing strategies and to create practical NC programs.
Duration of Training Course2 days
Shop Floor Programming
2D Laser Machine
PrerequisitesParticipation in an operator’s training course for a TRUMPF 2D laser machine
SubjectsComprehensive safety instructions | cutting-specific laser basics | getting familiar with the variables influencing the laser cut | process, machine, laser and workpiece parameters | laser power control | cutting of special materials | assessing cut quality
ObjectivesYou will be able to improve your cut quality as well as to establish piercing and cutting parameters for special material.
Duration of Training Course3 days
Technology Laser Cutting
2D Laser Machine
PrerequisitesParticipation in a TruTops training course "Drawing and Nesting" and "TruTops Laser Technology" as well as operator’s training course on a TruLaser Series 8000
SubjectsCreating a program for oversized parts with TruTops Laser | editing geometries | optimizing processing technology for oversized parts | converting NC programs for cycle processing | peculiarities of machine operation when processing oversize formats
ObjectivesYou will be able to program oversize parts, to adapt the processing technology to the peculiarities of cycle processing, to operate the machine with its special requirements and to efficiently produce oversize parts.
Duration of Training Course2 days
Technology Oversize Format ProcessingTruLaser 8000
PrerequisitesTechnically-oriented vocational training
Particular topics of maintenance / service require a qualification as verified electrical engineer
SubjectsStudying system components | detailed safety instructions | beam guidance | setting jobs and handling of cutting head and/or unit | diagnostics with the control | structure of the dust extraction system | explaining maintenance procedures for the machine and laser unit | machine options | pneumatic, gas, hydraulic, cooling water, lubrication diagrams and schematics
ObjectivesYou will be able to maintain the machine according to the given intervals.
Duration of Training Course3 / 4 days
Maintenance Course
2D Laser Machine
Tru
Lase
r
Tru
Lase
r
8 9
TruLaser
Programming Courses Control Duration
Basic Programming Courses
TruLaser Series 1000 / 2000 / 3000 / 5000 / 7000 / 8000 TRUMATIC L 2510 - L 6050 / HSL 2502 C / HSL 4002 C
SIN 840 D 1.5 days
TruTops Programming Courses
TruTops Laser Drawing and Nesting 2.5 days
TruTops Laser Technology 3 days
TruTops Laser Automation for SortMaster / LiftMaster Store + Sort 2 days
TruTops Laser Pro 2 days
TruTops Laser Update 1 day
TruTops Tube Technology for RotoLas 3 days
3D Tube Design 5 days
3D Tube Design for Experienced 3D Designers 2 days
Supplementary Programming Courses
TruTops Fab 3 - 8 days
TruTops Calculate 1 day
TruTops Unfold 1 day
Variants 3 days
after the introduction of relevant software updates
for detailed course information see chapter 'TruLaser Tube'
for detailed course information see chapter 'TruLaser Tube'
for detailed course information see chapter 'Supplementary Courses'
for detailed course information see chapter 'Supplementary Courses'
for detailed course information see chapter 'Supplementary Courses'
for detailed course information see chapter 'Supplementary Courses'
For the latest schedules and course availability
please check our website at
www.mytrumpf.com/training/en
Tru
Lase
r
Tru
Lase
r
10 11
TruLaser
Machine Courses Control Duration
Operator Courses
TruLaser 1030 B&R ARNC0 3 days
TruLaser Series 2000 / 3000 and TruLaser 5030 classic / 5040 / 5060 TRUMATIC L 2510 / L 2530 - L 6030 / L 3040
SIN 840 D 5 days
TruLaser 3030 (L20) / 3040 (L32) SIN 840 D sl 5 days
TruLaser 5030 / 5040 (L18) / 5060 (L19) TRUMATIC L 3050 / L 4050 / L 6050
SIN 840 D 5 days
TruLaser 5030 fiber SIN 840 D sl 5 days
TruLaser Series 7000 / 8000 TRUMATIC HSL 2502 C / HSL 4002 C
SIN 840 D 5 days
RotoLas for TruLaser Series 3000 / 5000 RotoLas for TRUMATIC L 3030 - L 6030
SIN 840 D 2 days
RotoLas for TruLaser 3030 (L20) / 3040 (L32) SIN 840 D sl 2 days
Workshop-oriented Programming Courses
Shop Floor Programming for TruLaser (except for TruLaser 1030 / 3030 (L20) / 3040 (L32) / 5030 fiber) ToPs 100 lite
SIN 840 D 2 days
Advanced Shop Floor Programming for TruLaser 3030 (L20) / 3040 (L32) / 5030 fiber
SIN 840 D sl
Technology Courses Laser Cutting
TruLaser Series 1000 / 2000 / 3000 and TruLaser 5030 classic / 5040 / 5060 TRUMATIC L 2510 - L 6050
B&R ARNC0 | SIN 840 D
3 days
TruLaser 3030 (L20) / 3040 (L32) SIN 840 D sl 3 days
TruLaser 5030 / 5040 (L18) / 5060 (L19) SIN 840 D / D sl 3 days
TruLaser 5030 fiber SIN 840 D sl 3 days
Technology Course Oversize Format Processing
TruLaser 8000 SIN 840 D 2 days
Maintenance Courses
TruLaser 1030 B&R ARNC0 3 days
TruLaser Series 2000 TRUMATIC L 2510 / L 2530
SIN 840 D 3 days
TruLaser Series 3000 with RotoLas TRUMATIC L 3020 / L 3030 - L 6030 with RotoLas / L 3040
SIN 840 D 4 days
TruLaser 3030 (L20) / 3040 (L32) SIN 840 D sl 4 days
TruLaser 5030 / 5040 (L18) / 5060 (L19) SIN 840 D 4 days
TruLaser 5030 classic / 5040 / 5060 TRUMATIC L 3050 / L 4050 / L 6050
SIN 840 D 4 days
TruLaser 5030 fiber SIN 840 D sl 3 days
TruLaser Series 7000 / 8000 TRUMATIC HSL 2502 C / HSL 4002 C
SIN 840 D 4 days
Maintenance Courses
TruCoax Laser (only for TruLaser 1030 / 2025 / 2030) TCF 1 Laser (only for TRUMATIC L 2510)
TASC 3 3 days
TruFlow Laser Part 1 - 3TLF Laser Part 1 - 3
TASC 3 each 5 days
Modular Switch Cabinet (only for TruLaser 2025 / 2030 / 3030 (L20) / 3040 (L32) / 5030 classic / 5030 fiber / 5030 / 5040 / 5040 (L18) / 5060 (L19)) Modular Switch Cabinet (only for TRUMATIC L 2510, L 3050 and L 4050)
Bosch PNC | SIN 840 D | TASC 3
2 days
Consulting Control Duration
Application Consulting / Production assistance According to demand
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
equivalent to course modules 'TruTops Drawing and Nesting' and 'TruTops Laser Technology' (see pages 8-9)
for detailed course information see chapter 'Consulting / Seminars'
for detailed course information see chapter 'Supplementary Courses'
for detailed course information see chapter 'Supplementary Courses'
for detailed course information see chapter 'Supplementary Courses'
For the latest schedules and course availability
please check our website at
www.mytrumpf.com/training/en
For the latest schedules and course availability
please check our website at
www.mytrumpf.com/training/en
Tru
Lase
r
Tru
Lase
r
25%
40%
80%
100%
65%
80%
100%
60%
12 13
Combination Punching / Laser Cutting:
Machine TypesTruMatic 3000
TruMatic 3000 fiber
TruMatic 6000
TruMatic 7000
TRUMATIC 600 L
Core Programming Courses Basic Programming
TruTops Punch Drawing and Nesting
TruTops Punch Technology
TruTops Punch Pro
Core Machine Courses Basic Operator
Operator
Technology Punching
Technology Laser Cutting
Maintenance
The combination machines from TRUMPF unite punching
and laser technology in one machine giving you the ad-
vantages of both processing methods. The punching head
produces standard contours and forms while complex
contours are cut with the laser. In addition to this, all combi-
nation machines can be fully automated.
Whether it is the operation, maintenance or software systems
of your TruMatic machine – our wide range of courses offers
every user the best training for achieving maximum machine
operation efficiency. See for yourself.
TruMatic
The above diagram shows the sequence in which the courses should be taken, the
level of knowledge you will attain and the length of each course. Course modules
highlighted in blue provide programming knowledge. Courses highlighted in green
help unlock your machine's potential and keep it in top form. In the darker boxes,
you will find optional courses that expand your knowledge in special fields. Training
schedules and course descriptions are listed on the following pages.
TruTops PunchDrawing and Nesting
2.5 days
Operator Course4 / 5 days
Basic Operator Course
2 days
Basic ProgrammingCourse2.5 days
TruTops PunchTechnology
7 days
TruTops PunchAutomation
2 days
TruTops PunchPro
2 days
expertise
TruTops PunchUpdate
1 day
time t
TechnologyPunching
3 days
TechnologyLaser Cutting
3 days
MaintenanceCourse
SheetMaster0,5 days
Instruction on-site
> 3 months
Application Consulting
Core Programming Courses Core Machine Courses Optional Courses Application Consulting
Application Consulting
Programming Courses
Machine Courses
Mac
hine
pur
chas
e
Mac
hine
inst
alla
tion
and
star
t-up
Operator CourseSheetMaster
1 day
Maintenance Course
3 / 4 / 5 days
Maintenance Laser
Tru
Mat
icTr
uM
atic
14 15
TruMatic Programming Courses
PrerequisitesPC knowledge
SubjectsMachine components (without automation components) | technical data | tool systems | structure of a complete file | technology data | tool change | slitting strategies on the blank | repositioning | eject parts | machine options (tapping, engraving, "soft-punch" etc.) | basic laser technology | define laser machining | laser technology tables | laser operating modes | basic cutting tech-nology | cutting and piercing parameters
ObjectivesYou will acquire basic technological knowledge necessary for TruTops Punch programming.
Duration of Training Course2.5 days
Basic Programming Course
Combination Machine
PrerequisitesPC knowledge
This training course is not required in case of prior knowledge of "TruTops Laser Drawing and Nesting"
SubjectsModular structure of software | introduc-tion in operating the system | drawing workpiece geometries | reading in and preparing DXF, IGES and MI drawings | creating mini-nests | job-related nesting of parts geometries on sheets
ObjectivesYou will be able to draw parts geometries, import external-format drawings in TruTops and to create a sheet layout. This training course provides the basic knowledge re-quired for the participation in the "TruTops Punch Technology" training course.
Duration of Training Course2.5 days
TruTops Punch Drawing and NestingCombination Machine
PrerequisitesParticipation in the basic training course to program your machine (or: comprehensive experience in operating the respective machine) Participation in a TruTops training course "Drawing and Nesting"
SubjectsSystem adaptation for your machine | work-ing with the TruTops data base | differentways to the production goal | program-ming punching, nibbling, laser and forming processing processes | sheet layout strate-gies | blank processing | repositioning | op-timize processing | creating NC programs | machine options
ObjectivesYou will be able to determine processing processes and create practical NC programs. In case of additionally available automation components it is necessary to participate in a training course "TruTops Punch Automa-tion".
Duration of Training Course7 days
TruTops Punch Technology
Combination Machine
PrerequisitesParticipation in the training course "TruTops Punch Technology"
SubjectsMachine components and technical data of automation components | system adapta-tion | loading and unloading strategies | create case-oriented NC programs
ObjectivesYou will be able to program automation sequences.
Duration of Training Course2 days
TruTops Punch Automation
Combination Machine
PrerequisitesParticipation in the training course "TruTops Punch Technology" and TruTops Punch programming experience (at least 3 - 6 months)
SubjectsLoading other data formats | preparation of geometries | tool data import | contour mode | programming project | auto-run | production plan | rules for removal | forming tools | processing samples | customize and create new technology tables and rules for combined machines | accurate contours | manipulate NC-texts and tables | your ques-tions
ObjectivesYou will be able to use the TruTops func-tions more effectively, to increase the process reliability of the machine and to reduce processing times of parts.
Duration of Training Course2 days
TruTops Punch Pro
Combination Machine
TruMatic Machine Courses
PrerequisitesTechnical understanding or technically-oriented vocational training
SubjectsMatrize Machine design | technical in- formation punching | nibbling and form- ing | tooling design | tool types and tool maintenance | tool selection criteria | active die
ObjectivesYou will acquire basic knowledge for the operator course TruMatic and/or TruPunch.
Duration of Training Course2 days
PrerequisitesParticipation in the basic operator training course for a punching or punching / laser combination machine (or: experience with TRUMPF punching tools)
SubjectsMachine presentation | structure and machine components | allocate and load tools | adjustment and handling of laser cutting head | training the user interface, operating elements and operating sequences with exercises | presentation of the diagnostics system and online help | manage programs | machine options
ObjectivesYou will be able to operate the machine’s operating elements and to prepare, initiate and influence the production process.
Duration of Training Course4 / 5 days
Basic Operator Course
Combination Machine
Operator Course
Combination Machine
PrerequisitesParticipation in the "Operator Course TruMatic 7000" (or: experience operating the TruMatic 7000)
SubjectsStructure and components of SheetMaster | manual operation | job table, clearing SheetMaster failures | entering an inter-rupted NC program with SheetMaster
ObjectivesYou will be able to handle the operational elements and to prepare, initiate and influ-ence the production process.
Duration of Training Course1 day
Operator Course SheetMaster
TruMatic 7000
Tru
Mat
ic
Tru
Mat
ic
16 17
PrerequisitesTechnically-oriented vocational training
Particular topics of maintenance / service require a qualification as verified electrical engineer
SubjectsMachine structure | technical data | cutting head, laser presser foot, laser sub-unit | laser beam guidance, chiller, exhaust system | hydraulic punching head with elec-tro-hydraulic linear amplifier | die adapter with die base and exhaust system | pneumatic and hydraulic plans and schematics | tool lubrication | overview of controls used | cleaning, care and lubrica-tion of machine according to maintenance overview (check list)
ObjectivesYou will be able to maintain the machine according to the given maintenance intervals.
Duration of Training Course3 / 4 / 5 days
Maintenance Course
TruMatic 3000 / 6000 / 7000
PrerequisitesParticipation in the "Maintenance Course TruMatic 7000"
SubjectsSheetMaster maintenance according to maintenance check list
ObjectivesYou will be able to maintain the SheetMaster according to the given main-tenance intervals.
Duration of Training Course0.5 days
Maintenance Course SheetMaster
TruMatic 7000
PrerequisitesParticipation in the operator’s training course for combination punching / laser machine
SubjectsSafety tips for working with the laser | cutting-specific laser basics | variables influencing laser cutting | practical process parameter elaboration | influence of process parameters on the laser cut | laser power control | cutting a variety of materials | as-sessing cut quality
ObjectivesYou will be able to establish and optimize cutting and piercing parameters.
Duration of Training Course3 days
Technology Laser Cutting
Combination Machine
TruMatic Machine Courses
PrerequisitesParticipation in the operator's training course for punching or combination punch-ing / laser machine | Experience in operat-ing and tooling a punching or combined punching / laser machine (at least for 3 - 6 months)
SubjectsBasics of punching process | framework conditions on the machine | lubrication | coatings | causes for burr and scratch for- mation | avoidance of corrugated sheet | punching with high precision | one- sided trimming | working with forming tools | causes for collisions | tool care | forming tools of size 5 | calibration tool
ObjectivesYou will acquire in-depth knowledge on the application possibilities of the production procedures punching, nibbling and forming as well as on the ideal use of punching, forming and special tools.
Duration of Training Course3 days
Technology Punching
Combination Machine
Tru
Mat
ic
Tru
Mat
ic
18 19
Machine Courses Control Duration
Operator Courses
Basics TruMatic und TruPunchBosch PNC / MTX | SIN 840 D
2 days
TruMatic Series 3000 TRUMATIC 3000 L
Bosch PNC / MTX 5 days
TruMatic 6000 and TRUMATIC 600 L TRUMATIC 600 L / 6000 L
SIN 840 D 5 days
TruMatic 7000 Bosch MTX 4 days
SheetMaster TruMatic 7000 Bosch MTX 1 day
Technology Courses Laser Cutting
PunchingBosch PNC / MTX | SIN 840 D
3 days
TruMatic Series 3000 TRUMATIC 3000 L
Bosch PNC / MTX 3 days
TruMatic 6000 and TRUMATIC 600 L TRUMATIC 600 L / 6000 L
SIN 840 D 3 days
TruMatic 7000 Bosch MTX 3 days
Maintenance Courses
TruMatic Series 3000 TRUMATIC 3000 L
Bosch PNC / MTX 3 days
TruMatic 6000 TRUMATIC 6000 L
SIN 840 D 5 days
TruMatic 7000 Bosch MTX 4 days
SheetMaster TruMatic 7000 Bosch MTX 0.5 days
Maintenance Courses
TruCoax Laser (only for TruMatic 3000) TCF 1 Laser (only for TRUMATIC 3000 L)
TASC 3 3 days
TruFlow Laser Part 1 - 3 TLF Laser Part 1 - 3
TASC 3 each 5 days
Modular Switch Cabinet (only for TruMatic Series 3000 / 7000) Modular Switch Cabinet (only for TRUMATIC 3000L)
Bosch PNC / MTX | TASC 3
2 days
TruMatic
Programming Courses Control Duration
Basic Programming Courses
TruMatic 3000 / 6000 / 7000 und TRUMATIC 600 L TRUMATIC 600 L / 3000 L / 6000 L
Bosch PNC / MTX | SIN 840 D
2.5 days
TruTops Programming Courses
TruTops Punch Drawing and Nesting 2.5 days
TruTops Punch Technology for TruMatic 3000 / 6000 / 7000 and TRUMATIC 600 L 7 days
TruTops Punch Automation for TruMatic 3000 / 6000 / 7000 and TRUMATIC 600 L
2 days
TruTops Punch Pro for TruMatic 3000 / 6000 / 7000 and TRUMATIC 600 L 2 days
TruTops Punch Update 1 day
Supplementary Programming Courses
TruTops Fab 3 - 8 days
TruTops Calculate 1 day
TruTops Unfold 1 day
Variants 3 days
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
Consulting Control Duration
Application Consulting / Production assistance According to demand
for detailed course information see chapter 'Supplementary Courses'
for detailed course information see chapter 'Supplementary Courses'
for detailed course information see chapter 'Supplementary Courses'
for detailed course information see chapter 'Consulting / Seminars'
for detailed course information see chapter 'Supplementary Courses'
for detailed course information see chapter 'Supplementary Courses'
for detailed course information see chapter 'Supplementary Courses'
for detailed course information see chapter 'Supplementary Courses'
after the introduction of relevant software updates
For the latest schedules and course availability
please check our website at
www.mytrumpf.com/training/en
For the latest schedules and course availability
please check our website at
www.mytrumpf.com/training/en
Tru
Mat
ic
Tru
Mat
ic
25%
40%
80%
100%
60%
65%
100%
80%
21
Machine TypesTruPunch 1000
TruPunch 2020
TruPunch 3000
TruPunch 5000
TRUMATIC 200 R
TRUMATIC 500 R
TRUMATIC 2000 R
Punching:
TruPunch from TRUMPF – a machine that is capable of more!
Our innovative punching technology enables complex,
three-dimensional sheet metal processing with the goal of
complete processing on a single machine. Not only that,
but all TRUMPF tools can be rotated, offering enormous
flexibility and productivity in processing. And, to top it off,
various components are available for convert our punch
presses into fully automated systems.
Do you want to get maximum performance out of
your TruPunch machine? In our training courses,
experienced instructors will teach you everything you
need to know for perfect operation, programming
and maintenance of your TruPunch.
Core Programming Courses Basic Programming
TruTops Punch Drawing and Nesting
TruTops Punch Technology
TruTops Punch Pro
Core Machine Courses Basic Operator
Operator
Technology Punching
Maintenance
TruPunch
The above diagram shows the sequence in which the courses should be taken, the
level of knowledge you will attain and the length of each course. Course modules
highlighted in blue provide programming knowledge. Courses highlighted in green
help unlock your machine's potential and keep it in top form. In the darker boxes,
you will find optional courses that expand your knowledge in special fields. Training
schedules and course descriptions are listed on the following pages.
TruTops PunchDrawing and Nesting
2.5 days
TruTops PunchTechnology
6 days
TruTops PunchAutomation
1.5 days
TruTops PunchPro
2 days
expertise
TruTops PunchUpdate
1 day
Operator CourseSheetMaster
1 day
Shop FloorProgramming
3 / 5 days
Maintenance CourseSheetMaster
0.5 days
expertise
time t
Operator Course3.5 / 4 days
Maintenance Course2.5 / 3.5 days
Instruction on-site
Basic ProgrammingCourse2.5 days
> 3 months
Core Programming Courses Core Machine Courses Optional Courses Application Consulting
Application Consulting
Application Consulting
Programming Courses
Machine Courses
Mac
hine
pur
chas
e
Mac
hine
inst
alla
tion
and
star
t-up
TechnologyPunching
3 days
BasicOperator Course
2 days
Tru
Pun
ch
22 23
TruPunch Programming Courses
PrerequisitesPC knowledge
SubjectsMachine components | technical data | tool system | basic NC programming | tech tables | work positions | tool change | ma-chining cycles | blank (slitting technology, execution possibilities) | repositioning | part ejection | non-routine technology | machine options | forming
ObjectivesYou will acquire basic technical knowledge necessary for TruTops Punch programming.
Duration of Training Course2.5 days
Basic Programming Course
Punching Machine
PrerequisitesPC knowledge
This training course is not required for those with "TruTops Laser Drawing and Nesting" experience
SubjectsModular structure of software | introduc-tion to operating the system | drawing workpiece geometries | reading in and preparing DXF, IGES and MI files | creating mini-nests | manual and job-related nest-ing of part geometries on sheets
ObjectivesYou will be able to draw part geometries, import external-format drawings in TruTops and to create a sheet layout. This training course provides you with the necessary ba-sic knowledge to participate in a “TruTops Punch Technology” course.
Duration of Training Course2.5 days
TruTops Punch Drawing and NestingPunching Machine
PrerequisitesParticipation in the training course "TruTops Punch Technology"
SubjectsMachine components and technical data of automation components | system adapta-tion | loading and unloading strategies | program automation components | creating case-oriented NC programs
ObjectivesYou will be able to program automation sequences.
Duration of Training Course1.5 days
PrerequisitesParticipation in the training course "TruTops Punch Technology" and TruTops Punch programming experience (at least 3 - 6 months)
SubjectsLoading other data formats | preparation of geometries | tool data import | contour mode | programming project | auto-run | production plan | rules for removal | forming tools | processing samples | manipulate NC-texts and tables | your questions
ObjectivesYou will be able to use the TruTops func-tions more effectively, to increase the process reliability of the machine and to reduce part processing time.
Duration of Training Course2 days
TruTops Punch Pro
Punching Machine
PrerequisitesParticipation in a basic training course to program your machines (or: comprehensive experience in operating the respective machine) Participation in a TruTops training course “Drawing and Nesting”
SubjectsSystem adaptation for your machine | work-ing with the TruTops data base | different ways to the production goal | program-ming punching, nibbling and forming processes | sheet layout strategies | blank processing | repositioning | process optimi-zation | creating NC programs | machine options
ObjectivesYou will be able to determine processes and create practical NC programs. For automation components, participation in the "TruTops Punch Automation" training course is required.
Duration of Training Course6 days
TruTops Punch Technology
Punching Machine
TruTops Punch Automation
Punching Machine
TruPunch Machine Courses
PrerequisitesPrerequisitesTechnical understanding or technically-oriented vocational training
SubjectsMatrize Machine design | technical in- formation punching | nibbling and form- ing | tooling design | tool types and tool maintenance | tool selection criteria | active die
ObjectivesYou will acquire basic knowledge for the operator course TruMatic and/or TruPunch.
Duration of Training Course2 days
PrerequisitesParticipation in the basic operator training course for a punching or punching / laser combination machine (or: experience with TRUMPF punching tools)
SubjectsPresentation of machine | structure and components of machine | adjust and load tools | training the user interface, opera-tional elements and processes along with exercises | presentation of the diagnostics system and online help | program manage-ment | machine options
ObjectivesYou will be able to handle the machine’s operating elements and to prepare, initiate and influence the production process.
Duration of Training Course3.5 / 4 days
Basic Operator Course
Punching Machine
Operator Course
Punching Machine
PrerequisitesParticipation in the "Operator Course TruPunch 2020 / 3000 / 5000" (or: TruPunch 3000 / 5000 operation experience)
SubjectsStructure and components of SheetMaster | manual operating | job table, clearing SheetMaster failures | entering an inter-rupted NC program with SheetMaster
ObjectivesYou will be able to reliably handle the op-erational elements and to prepare, initiate and influence the production process.
Duration of Training Course1 day
Operator Course SheetMaster
TruPunch 3000 / 5000
PrerequisitesParticipation in the basic programming course for your machine(or: participation in the "Operator Course" for your machine)
SubjectsRequired system adaptations | simply creating typical punching part geometries including 90° bending extensions with relief grooves and unfolding | simply draw-ing workpiece geometries | sheet layout | programming punching and nibblingblank processing | creating NC programs
ObjectivesYou will be able to draw simple work- pieces, select suitable processing strategies and to generate practical NC programs.
Duration of Training Course3 days
Easy Programming
TruPunch 1000
PrerequisitesPC knowledge
This training course is intended for the TruTops Punch Basic software at the pro-gramming station and on the machine.
This training course is not required if TruTops Laser / Punch / Bend Drawing experience is available
SubjectsModular software structure | introduction to how to operate the system | drawing work-piece geometries | reading in and preparing DXF, IGES and MI drawings
ObjectivesYou will be able to draw part geometries and to import external-drawing formats in TruTops Punch Basic.
Duration of Training Course1 day
TruTops Punch Basic Drawing
TruPunch 1000 / 5000 (S10)
PrerequisitesParticipation in the basic training course toprogram your machine (or: comprehensive experience in operating the respective machine) Participation in a TruTops training course “Drawing”
This training course is intended for the TruTops Punch Basic software at the pro-gramming station and on the machine
SubjectsSystem adaptation for your machine | working with the TruTops data base | differ-ent ways to the production goal | program-ming of punching, nibbling and forming | sheet layout strategies (without nesting) | blank processing | repositioning | process optimization | creating NC programs | machine options
ObjectivesYou will be able to determine processing and create practical NC programs.
Duration of Training Course4 days
TruTops Punch Basic Technology
TruPunch 1000 / 5000 (S10)
Tru
Pun
ch
Tru
Pun
ch
24 25
PrerequisitesTechnically-oriented vocational training
SubjectsMachine structure | technical data | hydrau-lic punching head with electro-hydraulic linear amplifier | die adapter | automatic tool changer | how to use hydraulic, pneumatic and circuit diagrams | adjust-ment jobs | how to use the diagnostics system | machine maintenance according to intervals
ObjectivesYou will be able to maintain the machine according to the given maintenance intervals.
Duration of Training Course2.5 days
Maintenance CourseTruPunch 2020 and TRUMATIC 2000 R
PrerequisitesParticipation in the operator's training course for punching or combination punching / laser machine | Experience in operating and tooling a punching or combined punching / laser machine (at least for 3 - 6 months)
SubjectsBasics of punching process | framework conditions on the machine | lubrication | coatings | causes for burr and scratch for-mation | avoidance of corrugated sheet | punching with high precision | one- sided trimming | working with forming tools | causes for collisions | tool care | forming tools of size 5 | calibration tool
ObjectivesYou will acquire in-depth knowledge on the application possibilities of the production procedures punching, nibbling and forming as well as on the ideal use of punching, forming and special tools.
Duration of Training Course3 days
PrerequisitesTechnically-oriented vocational training
SubjectsMachine structure | technical data | hydrau-lic punching head with electro-hydraulic linear amplifier | die adapter | exhaust system | principle of tool changer | drive system | hydraulics, pneumatics and elec-trics | tool lubrication | adjustment jobs | maintaining machine according to inter-vals | diagnostics systems
ObjectivesYou will be able to maintain the machine according to the given maintenance intervals.
Duration of Training Course2.5 / 3.5 days
Technology Punching
Punching Machine
Maintenance Course
TruPunch 1000 / 3000 / 5000
PrerequisitesParticipation in the "Maintenance Course TruPunch 3000 / 5000"
SubjectsSheetMaster maintenance according to maintenance check list
ObjectivesYou will be able to maintain the SheetMas-ter according to the given maintenance intervals.
Duration of Training Course0.5 days
Maintenance Course SheetMasterTruPunch 3000 / 5000
TruPunch Machine Courses
Machine TypesTruPunch 2020 / 3000 / 5000 (except TruPunch 5000 (S10)) and TRUMATIC 2000 R / 200 R
PrerequisitesPC knowledge
Participation in the basic programming training course for your machine (or: participation in the operator’s training course for your machine)
This training course is not required if TruTops Punch experience is available
SubjectsDrawing of part geometries | sheet layout |programming of punching, nibbling and forming | blank processing | repositioning | process optimization | generating NC programs
ObjectivesYou will be able to draw workpieces, select appropriate processing strategies and to generate practical NC programs.
Duration of Training Course5 days
Shop Floor Programming
Punching Machine
Tru
Pun
ch
Tru
Pun
ch
26 27
TruPunch
Machine Courses Control Duration
Operator Courses
Basics TruMatic and TruPunchBosch PNC / MTX |SIN 840 D
2 days
TruPunch 1000 TRUMATIC 1000 R
Bosch PNC 3.5 days
TruPunch 2020 / 3000 / 5000 and TRUMATIC 2000 R TRUMATIC 2000 R - 5000 R
Bosch PNC | SIN 840 D
4 days
SheetMaster TruPunch 3000 / 5000 TRUMATIC 3000 R / 5000 R SheetMaster
SIN 840 D 1 day
Workshop-oriented Programming Courses
Easy Programming for TruPunch 1000 Easy Programming for TRUMATIC 1000 R
Bosch PNC 3 days
TruTops Punch Basic Drawing for TruPunch 1000 / 5000 (S10)Bosch PNC | SIN 840 D
1 day
TruTops Punch Basic Technology for TruPunch 1000 / 5000 (S10)Bosch PNC | SIN 840 D
4 days
Shop Floor Programming for TruPunch 2020 / 3000 / 5000 and TRUMATIC 200 R / 2000 R | ToPs 2000 for TRUMATIC 200 R / 2000 R / 2020 R / 3000 R / 5000 R
Bosch PNC | SIN 840 D
5 days
Technology Course
PunchingBosch PNC / MTX |SIN 840 D
3 days
Maintenance Course
TruPunch 1000 (TRUMATIC 1000 R) Bosch PNC 2.5 days
TruPunch 2020 and TRUMATIC 2000 R (TRUMATIC 2000 R / 2020 R) Bosch PNC 2.5 days
TruPunch 3000 (TRUMATIC 3000 R) Bosch PNC 3.5 days
SheetMaster TruPunch 3000 (TRUMATIC 3000 R SheetMaster) Bosch PNC 0.5 days
TruPunch 5000 (TRUMATIC 5000 R) SIN 840 D 3.5 days
SheetMaster TruPunch 5000 (TRUMATIC 5000 R SheetMaster) SIN 840 D 0.5 days
Maintenance Course
Modular Switch Cabinet (only for TruPunch 1000 / 3000) Modular Switch Cabinet (only for TRUMATIC 3000 R)
Bosch PNC | SIN 840 D TASC 3
2 days
Programming Courses Control Duration
Basic Programming Courses
TruPunch 1000 / 2020 / 3000 / 5000 and TRUMATIC 2000 R TRUMATIC 2000 R / 2020 R / 3000 R / 5000 R
Bosch PNC | SIN 840 D
2.5 days
TRUMATIC 200 R / 500 R CC 220 2.5 days
TruTops Programming Courses
TruTops Punch Drawing and Nesting 2.5 days
TruTops Punch Technology for TruPunch 1000 / 2020 / 3000 / 5000 and TRUMATIC 2000 R
6 days
TruTops Punch Automation for TruPunch 3000 / 5000 1.5 days
TruTops Punch Technology for TRUMATIC 200 R / 500 R 6 days
TruTops Punch Automation for TRUMATIC 500 R 1.5 days
TruTops Punch Pro for TruPunch 1000 / 2020 / 3000 / 5000 and TRUMATIC 2000 R 2 days
TruTops Punch Update 1 day
Supplementary Programming Courses
TruTops Fab 3 - 8 days
TruTops Calculate 1 day
TruTops Unfold 1 day
Variants 3 days
Consulting Control Duration
Application Consulting / Production assistance According to demand
NEW
NEW
NEW
for detailed course information see chapter 'Supplementary Courses'
for detailed course information see chapter 'Supplementary Courses'
for detailed course information see chapter 'Supplementary Courses'
for detailed course information see chapter 'Supplementary Courses'
after the introduction of relevant software updates
for detailed course information see chapter 'Supplementary Courses'
for detailed course information see chapter 'Consulting / Seminars'
For the latest schedules and course availability
please check our website at
www.mytrumpf.com/training/en
For the latest schedules and course availability
please check our website at
www.mytrumpf.com/training/en
Tru
Pun
ch
Tru
Pun
ch
25%
40%
100%
65%
85%
100%
60%
29
TruBend Series 3000
Machine Types
TruBend 3066
TruBend 3120
TruBend 3180
Core Programming Courses Basic Programming
TruTops Bend Drawing
TruTops Bend Technology
Core Machine Courses Basic Operator
Operator
Technology Course Bending
Maintenance and Service
Bending:
With the TruBend Series 3000, you get the best entry-level
machine for bending technology. Equipped with the most
important functions for reliable bending, the TruBend Series
3000 is the ideal solution for anyone who places high value
on TRUMPF quality and also on a highly attractive price-to-
performance ratio.
Learn all the basics you need to handle your TruBend Series
3000 with perfection! In our courses, step by step you
will learn everything you need to reach your machine's full
capacity. Interested? Find out more!
Series 3000TruBend
The above diagram shows the sequence in which the courses should be taken, the
level of knowledge you will attain and the length of each course. Course modules
highlighted in blue provide programming knowledge. Courses highlighted in green
help unlock your machine's potential and keep it in top form. In the darker boxes,
you will find optional courses that expand your knowledge in special fields. Training
schedules and course descriptions are listed on the following pages.
TruTops BendDrawing1.5 days
TruTops BendTechnology
5 days
expertise
TruTops BendUpdate
1 day
expertise
time t
Basic Operator Course
1 day
TechnologyBending
3 days
Maintenance and Service Course
2 days
Instruction on-site
Basic ProgrammingCourse1.5 days
> 3 months
Operator Course2 days
Core Programming Courses Core Machine Courses Optional Courses Application Consulting
Application Consulting
Application Consulting
Programming Courses
Machine Courses
Mac
hine
pur
chas
e
Mac
hine
inst
alla
tion
and
star
t-up
Tru
Ben
d
30 31
TruBend Series 3000 Machine Courses
PrerequisitesExperience in handling a press brake or participation in the TruBend "Basic Opera-tor Course"(or: participation in the basic course to program your machine)
SubjectsMachine design | machine options | techni-cal data | user interface DELEM control and operational elements | safety instructions | bending methods | functional units (axis system, press beam cycle etc.) | tool system | calculations and criteria for selec-ting tools | numeric and graphical program creation | program optimization and hand-ling | processing various programs
ObjectivesYou will be able to operate, program and set-up a TruBend Series 3000, guarantee-ing part quality.
Duration of Training Course2 days
Operator Course
TruBend Series 3000
PrerequisitesExperience in operating and tooling a press brake, creating bending programs, designing bent parts or you work in the production planning and are responsible for the quality control of bending parts
SubjectsBending technology basics | machine technology | characteristics of TRUMPF bending tools | application technology | tool selection criteria | special tools | solu-tion examples for bending tasks
ObjectivesYou will acquire comprehensive knowl-edge on the variety of processing pos-sibilities with a TRUMPF press brake and TRUMPF Bending Tools.
Duration of Training Course3 days
Technology Course Bending
TruBend Series 3000 / 5000 / 7000
PrerequisitesTechnically-oriented vocational training
SubjectsMachine structure | technical data | operat-ing conditions | main drive unit | functional units | backgauge system | tool clamping | machine control | PCSS press safety control
ObjectivesYou will be able to maintain the machine according to the given intervals as well as to localize malfunctions and clear simple errors.
Duration of Training Course2 days
Maintenance and Service CourseTruBend Series 3000
PrerequisitesPC knowledge and technical understanding or experience in handling the material sheet
SubjectsMachine design | machine options | techni-cal data | axis system and other functional units | press beam cycle | bending methods | tool overview | calculations and criteria for selecting tools
ObjectivesYou will acquire basic knowledge for the operator course TruBend Series 3000 / 5000 / 7000 and/or the course TruTops Bend Technology.
Duration of Training Course1 day
Basic Operator Course
TruBend Series 3000 / 5000 / 7000
PrerequisitesPC knowledge
SubjectsComponents/axes of machine | technical data | tool system | programming param-eters | bending procedures (air bending, coining) | bending technology: procedures, offset values, framework conditions (mini-mum side length, component design)
ObjectivesYou will acquire basic technical knowledge necessary for TruTops Bend. You will be able to interpret program parameters for bending machines.
Duration of Training Course1.5 days
Basic Programming Course
Press Brake
PrerequisitesPC knowledge
This training course is not required for those with knowledge of TruTops Laser / Punch / Tube Drawing
SubjectsModular software structure | introduction to operating the system | drawing of work- piece geometries | reading in and preparing DXF, IGES and MI drawings
ObjectivesYou will be able to draw part geometries and to import external-format drawings in TruTops.
Duration of Training Course1.5 days
TruTops Bend Drawing (Programming station)
PrerequisitesParticipation in the basic training course to program your machine (or: comprehensive experience in operating the respective machine) Participation in a TruTops "Drawing" train-ing course
SubjectsOperating the system | maintenance and optimization of data base (shortening values, material management, tool data, machine data) | creation of simple profiles by the profile editor and their unfolding | adaptation of unfolding processes to correct shortening values | input of bending lines with necessary bending data and bend-ing sequences | creating allocation plan (checking and modification of determined tool set-ups) | simulation of the bending sequence | generating NC programs
ObjectivesYou will be able to enter the neces-sary bending data, to select appropriate processing strategies and to generate practical NC programs.
Duration of Training Course5 days
TruTops Bend Technology (Programming station)
TruBend Series 3000 Programming Courses
Tru
Ben
d
Tru
Ben
d
32 33
Machine Courses Control Duration
Operator Course
Basics TruBend Series 3000 / 5000 / 7000 DELEM 1 day
TruBend Series 3000 DELEM 2 days
Technology Courses
Bending DELEM 3 days
Maintenance and Service Courses
TruBend Series 3000 DELEM 2 days
TruBend Series 3000
Programming Courses Control Duration
Basic Programming Courses
TruBend Series 3000 / 5000 / 7000 and TrumaBend V Series 1.5 days
TruTops Programming Courses
TruTops Bend Drawing (Programming station) 1.5 days
TruTops Bend Technology (Programming station) 5 days
TruTops Bend Update 1 day
Supplementary Programming Courses
TruTops Fab 3 - 8 days
TruTops Calculate 1 day
TruTops Unfold 1 day
Consulting Control Duration
Application Consulting / Production assistance According to demand
for detailed course information see chapter 'Supplementary Courses'
for detailed course information see chapter 'Supplementary Courses'
for detailed course information see chapter 'Supplementary Courses'
after the introduction of relevant software updates
for detailed course information see chapter 'Consulting / Seminars'
For the latest schedules and course availability
please check our website at
www.mytrumpf.com/training/en
For the latest schedules and course availability
please check our website at
www.mytrumpf.com/training/en
Tru
Ben
d
Tru
Ben
d
25%
40%
100%
50%
65%
85%
100%
60%
34 35
TruBend Series 5000
Machine Types
TruBend 5050
TruBend 5085
TruBend 5130
TruBend 5170
TruBend 5230
TruBend 5320
Core Programming Courses Basic Programming
TruTops Bend Drawing
TruTops Bend Technology
Core Machine Courses Basic Operator
Operator
Date Base Management
Technology Bending
Maintenance and Service
Both the ram and backgauge are marked by high speeds and
acceleration rates that ensure high dynamics. Paired with a
work area that can be customized for the operator, the
machines of the TruBend Series 7000 offer optimal conditions
for productive and ergonomic work.
Do you wish to achieve maximum efficiency on your TruBend
Series 5000 / 7000? Regardless of whether you are learning
the basics or wish to expand your knowledge in specialized
applications – our broad range of courses offers just the right
training for you. Find out for yourself!
The machines of the TruBend Series 5000 are the flexible
and productive press brakes. And there is a good reason for
this: The TruBend Series 5000 unites innovative technology
with high precision. This goes hand in hand with a very high
level of flexibility when it comes to bending different parts.
From programming, through allocation all the way to the
bending process – the TruBend Series 5000 is extremely
productive. Moreover, you can also automate these machines
with the BendMaster.
With the TruBend Series 7000 machines, we offer perfect
interaction between man and machine.
Bending:
Series 5000 / 7000TruBend
TruBend Series 7000
Machine Types
TruBend 7018
TruBend 7036
The above diagram shows the sequence in which the courses should be taken, the
level of knowledge you will attain and the length of each course. Course modules
highlighted in blue provide programming knowledge. Courses highlighted in green
help unlock your machine's potential and keep it in top form. In the darker boxes,
you will find optional courses that expand your knowledge in special fields. Training
schedules and course descriptions are listed on the following pages.
TruTops BendDrawing1.5 days
TruTops BendTechnology
5 days
TruTops BendAutomation
4 days
expertise
TruTops BendUpdate
1 day
Operator CourseBendMaster
5 days
expertise
time t
Operator Course2 / 3 days
TechnologyBending
3 days
Maintenance and Service Course
2 days
Instruction on-site
Basic Programming Course1.5 days
> 3 months
Date Base Management
1 day
Basic Operator Course
1 day
Core Programming Courses Core Machine Courses Optional Courses Application Consulting
Application Consulting
Application Consulting
Shop Floor Programming
Programming Courses
Machine Courses
Mac
hine
pur
chas
e
Mac
hine
inst
alla
tion
and
star
t-up
Tru
Ben
d
Tru
Ben
d
36 37
TruBend Series 5000 / 7000 Machine Courses
PrerequisitesPC knowledge and technical understanding or experience in handling sheet metal
SubjectsMachine design | machine options | techni-cal data | axis system and other functional units | press beam cycle | bending methods | tool overview | calculations and criteria for selecting tools
ObjectivesYou will acquire the basic knowledge for the operator course TruBend Series 3000 / 5000 / 7000 and/or the course TruTops Bend Technology.
Duration of Training Course1 day
Basic Operator Course
TruBend Series 3000 / 5000 / 7000
PrerequisitesPC knowledge and experience in handling a press brake or participation in the TruBend "Basic Operator Course"(or: participation in the basic course to program your machine)
SubjectsUser interface | operational elements and operational sequences | safety instruc-tions | tool system | numeric and graphical program creation | program optimization and handling | processing various programs by the ACB angle sensor system and/or bending aid
ObjectivesYou will be able to operate, program and set-up a TruBend Series 5000, guaranteeing part quality.
Duration of Training Course3 days
PrerequisitesExperience in handling a press brake or participation in the TruBend "Basic Operator Course"(or: participation in the basic course to program your machine)
SubjectsMachine design | machine options | techni-cal data | user interface TASC 6000 control and operational elements | safety instruc-tions | bending methods | functional units(axis system, press beam cycle etc.) | tool system | calculations and criteria for selec-ting tools | numeric and graphical program creation | program optimization and hand-ling | processing various programs
ObjectivesYou will be able to operate, program and set-up a TruBend Series 7000, guarantee-ing the part quality.
Duration of Training Course2 days
Operator Course
TruBend Series 5000
Operator Course
TruBend Series 7000
PrerequisitesParticipation in an operator training for a bending machine
SubjectsCreating materials | inserting special upper and lower tools | creating bending curves | adopting one’s own bending factors | as-signing user rights
ObjectivesYou will be able to customize the machine control to individual customer requirements.
Duration of Training Course1 day
Data Base Management
TruBend Series 5000 / 7000
PrerequisitesParticipation in the "Operator Course TruBend Series 5000"
SubjectsStructure BendMaster | technical data | additional equipment | manual operating device | axis system | safety switching on and off | manual moving | select and man-age programs | part loading | producing | assembly of gripper systems | diagnostic at gripper system and coveyor
ObjectivesYou will acquire basic knowledge and skills to operate the BendMaster.
Duration of Training Course5 days
Operator Course BendMaster
TruBend Series 5000
TruBend Series 5000 / 7000 Programming Courses
PrerequisitesPC knowledge
This training course is not required for those with TruTops Laser / Punch / Tube Drawing knowledge
SubjectsModular software structure | introduction to how to operate the system | drawing of workpiece geometries | reading in and preparing DXF, IGES and MI drawings
ObjectivesYou will be able to draw part geometries and import external-format drawings in TruTops.
Duration of Training Course1.5 days
TruTops Bend Drawing (Programming station)
PrerequisitesParticipation in the basic training course to program your machine (or: comprehensive experience in operating the respective machine) Participation in a TruTops "Drawing" train-ing course
SubjectsOperating the system | maintenance and optimization of data base (shortening values, material management, tool data, machine data) | creation of simple profiles by the profile editor and their unfolding | adaptation of unfolding processes to correct shortening values | input of bending lines with necessary bending data and bend-ing sequence | creating allocation plan (checking and modification of determined tool set-ups) | simulation of the bending sequence | generating NC programs
ObjectivesYou will be able to enter the necessary bending data, select appropriate process- ing strategies and to generate practical NC programs.
Duration of Training Course5 days
TruTops Bend Technology (Programming station)
PrerequisitesParticipation in the training course "TruTops Bend Technology"
SubjectsSub-assemblies and technical data of auto-mation components | framework condi-tions | principle of course of part manu-facturing with automation | basics system adaptation in TruTops Bend | program creation with automation TruTops Bend | course, reset and modification possibili-ties | loading and unloading strategies
ObjectivesYou will be able to program automation sequences.
Duration of Training Course4 days
TruTops Bend Automation BendMaster
PrerequisitesPC knowledge
SubjectsComponents/axes of machine | technical data | tool system | programming param-eters | bending procedures (air bending, coining) | bending technology: procedures, offset values, framework conditions (mini-mum side length, component design)
ObjectivesYou will acquire the basic technical knowl-edge necessary for TruTops Bend. You will be able to interpret program parameters for bending machines.
Duration of Training Course1.5 days
Basic Programming Course
Press Brake
PrerequisitesPC knowledge
This training course has been designed for operators who prepare or edit workpiece drawings for TruTops Bend by TruTops Bend Drawing (Machine) on the control
This training course is not required for those with prior knowledge of TruTops Laser / Punch / Tube Drawing
SubjectsModular software structure | introduction to how to operate the system | drawing work-piece geometries | reading in and preparing DXF, IGES and MI drawings
ObjectivesYou will be able to draw part geometries and import drawings of external formats in TruTops.
Duration of Training Course1 day
TruTops Bend Drawing (Machine)TruBend Series 5000
Tru
Ben
d
Tru
Ben
d
38 39
TruBend Series 5000 / 7000 Machine Courses
PrerequisitesTechnically-oriented vocational training
SubjectsMachine structure | technical data | operat-ing conditions | Main drive unit | functional units | backgauge system | tool clamping | machine control | PCSS press safety control
ObjectivesYou will be able to maintain the machine according to the given intervals as well as to localize malfunctions and clear simple errors.
Duration of Training Course2 days
Maintenance and Service Course
TruBend Series 5000 / 7000
PrerequisitesYou have experience in operating and tooling a press brake, creating bending programs, designing bending parts or you work in the production planning and are responsible for the quality control of bending parts
SubjectsBending technology basics | machine technology | characteristics of TRUMPF Bending Tools | application technology | tool selection criteria | special tools | solu-tion examples for bending tasks
ObjectivesYou will acquire comprehensive knowledge on the variety of processing possibilities with a TRUMPF press brake and TRUMPF Bending Tools.
Duration of Training Course3 days
Technology Course Bending
TruBend Series 3000 / 5000 / 7000
PrerequisitesParticipation in the basic training course to program your machine (or: comprehensive experience in operating the respective machine) Participation in a TruTops "Drawing" train-ing course
SubjectsOperating the system | Maintenance and optimization of data base (shortening values, material management, tool data, machine data) | creation of simple profiles by the profile editor and their unfolding | adaptation of unfolding processes to cor-rect shortening values | input of bending lines with necessary bending data and bending sequence | creating allocation plan (checking and modification of determined tool set-ups) | simulation of the bending sequence | generating NC programs
ObjectivesYou will be able to enter the necessary bending data, select appropriate process- ing strategies and to generate practical NC programs.
Duration of Training Course5 days
TruTops Bend Technology (Machine)TruBend Series 5000
Tru
Ben
d
Tru
Ben
d
40 41
TruBend Series 5000 / 7000
Programming Courses Control Duration
Basic Programming Courses
TruBend Series 3000 / 5000 / 7000 and TrumaBend V Series 1.5 days
TruTops Programming Courses
TruTops Bend Drawing (Programming station) 1.5 days
TruTops Bend Technology (Programming station) 5 days
TruTops Bend Automation BendMaster 4 days
TruTops Bend Update 1 day
Supplementary Programming Courses
TruTops Fab 3 - 8 days
TruTops Calculate 1 day
TruTops Unfold 1 day
Machine Courses Control Duration
Operator Courses
Basics TruBend Series 3000 / 5000 / 7000 (in case of TruBend Series 5000 as of software version 5.0)
TASC 6000 1 day
TruBend Series 5000 incl. graphical Shop Floor Programming and ACB (as of software version 5.0)
TASC 6000 3 days
TruBend Series 5000 incl. ACB TrumaBend V Series with ACB (up to software version 4.5)
TASC 6000 3 days
TruBend Series 7000 TASC 6000 2 days
BendMaster TASC 6000 5 days
Workshop-oriented Programming Courses
Date Base Management TruBend Series 5000 / 7000 (in case of TruBend Series 5000 as of software version 5.0)
TASC 6000 1 day
Programming Machine Profile Editor (up to software version 4.5)
TASC 6000 2 days
TruTops Bend Drawing (Machine) for TruBend Series 5000 1 day
TruTops Bend Technology (Machine) for TruBend Series 5000 5 days
Technology Courses
Bending TASC 6000 3 days
Maintenance and Service Courses
TruBend Series 5000 TrumaBend V Series
TASC 6000 2 days
TruBend Series 7000 TASC 6000 2 days
Consulting Control Duration
Application Consulting / Production assistance According to demand
for detailed course information see chapter 'Supplementary Courses'
for detailed course information see chapter 'Supplementary Courses'
for detailed course information see chapter 'Supplementary Courses'
after the introduction of relevant software updates
for detailed course information see chapter 'Consulting / Seminars'
For the latest schedules and course availability
please check our website at
www.mytrumpf.com/training/en
For the latest schedules and course availability
please check our website at
www.mytrumpf.com/training/en
Tru
Ben
d
Tru
Ben
d
40%
100%
65%
100%
60%
42 43
TruBend Series 8000
Machine Types
TruBend 8050
TruBend 8085
TruBend 8130
TruBend 8170
TruBend 8230
TruBend 8300
TruBend 8400
TruBend 8500
TruBend 8600
The TruBend Series 8000 is distinguished by its made-to-order
functionality. The TruBend Series 8000 is exactly the right
solution for all users who have to bend workpieces that are
extremely long, high or thick. After all, tailor-made solutions
are the daily business of EHT, our cooperation partner.
Would you like to know how you can make the best use of
the excellent performance of the TruBend Series 8000? Then
check out our extensive training program and learn how to
use this machine's performance most efficiently.
The above diagram shows the sequence in which the courses should be taken, the
level of knowledge you will attain and the length of each course. Course modules
highlighted in blue provide programming knowledge. Courses highlighted in green
help unlock your machine's potential and keep it in top form. In the darker boxes,
you will find optional courses that expand your knowledge in special fields. Training
schedules and course descriptions are listed on the following pages.
The dates for the TruTops Bend programming courses can be found under
"Bending | TruBend Series 3000" (pages 32 - 33).
Training courses for the TruBend Series 8000 machines are held at EHT in Teningen,
Germany.
Bending:
Series 8000TruBend
Core Programming Courses Core Machine Courses Optional Courses
TruTops BendDrawing1.5 days
TruTops BendTechnology
5 days
expertise
TruTops BendUpdate
1 day
Operator Course Basics LCB
1 day
expertise
time t
Maintenance and Service Course
3 days
Instruction on-site
> 3 months
Operator CourseLCB
2 days
Operator Course2 / 3 days
Programming Courses
Machine Courses
Mac
hine
pur
chas
e
Mac
hine
inst
alla
tion
and
star
t-up
Tru
Ben
d
Tru
Ben
d
44 45
TruBend Series 8000 Machine CoursesTruBend Series 8000 Programming Courses
PrerequisitesTechnically-oriented vocational training or experience in sheet metal processing
SubjectsStructure of press brake, standard com-ponents and optional equipments | safety instructions | functional units | training the user interface, operating elements and op-erating sequences with exercises | technolo-gy bending | tool system | program creation by graphics and NC input | program hand-ling and optimization | bending methods | processing different bending programs
ObjectivesYou will acquire knowledge and skills to allocate and operate a press brake of the TruBend Series 8000 with 2D control, run-in bending parts and guarantee product quality.
Duration of Training Course2 days
Operator CourseTruBend Series 8000with 2D control
PrerequisitesTechnically-oriented vocational training or experience in sheet metal processing
SubjectsStructure of press brake, standard sub-assemblies and optional equipments | safety instructions | functional units | training the user interface, operating elements and operating sequences with exercises | technology bending | tool system | program creation by graphics and NC input | program handling and optimization | bending methods | processing different bending programs | create products in 3D | bending process with 3D support
ObjectivesYou will acquire knowledge and skills to allocate and operate a press brake of the TruBend Series 8000 with 3D control, run-in bending parts and guarantee product quality.
Duration of Training Course3 days
Operator CourseTruBend Series 8000with 3D control
PrerequisitesParticipation in the "Operator Course TruBend Series 8000"
SubjectsMeasuring principle | sensor system compo-nents | handling | conditions and possibili-ties of use | functional principle of sensor measuring methods in theory and practice
ObjectivesYou will acquire knowledge of the possibili-ties of use and functional principle of the LCB angle sensor system.
Duration of Training Course1 day
Operator Course Basics LCB
TruBend Series 8000
PrerequisitesYou program and/or operate a TruBend Series 8000 with Cybelec control and so far you have not yet or rarely used the LCB angle sensor system
SubjectsMeasuring principle | sensor system compo-nents | handling | conditions and possibili-ties of use | functional principle of sensor measuring methods in theory and practice | working examples | solution approaches to bending with the angle sensor system on complex parts
ObjectivesYou will acquire comprehensive knowledge and skills to efficiently use the LCB angle sensor system on your bending parts.
Duration of Training Course2 days
Operator Course LCB
TruBend Series 8000
PrerequisitesTechnically-oriented vocational training
SubjectsMachine structure | technical data | installa-tion conditions | functional units | hydrau-lics, pneumatics and electrics | backgauge system | tool clamping | bending aid | LCB sensor system | press safety control | drives
ObjectivesYou will be able to maintain the machine according to the given intervals.
Duration of Training Course3 days
Maintenance and Service CourseTruBend Series 8000
PrerequisitesPC knowledge
This training course is not required for those with prior knowledge of TruTops Laser / Punch / Tube Drawing
SubjectsModular structure of software | introduction into how to operate | drawing of work piece geometries | reading in and preparing DXF, IGES and MI drawings
ObjectivesYou will be able to draw part geometries and import external-format drawings in TruTops.
Duration of Training Course1.5 days
TruTops Bend Drawing (Programming station)
PrerequisitesParticipation in the "Operator Course TruBend Series 8000" (or: comprehensive experience in operating the respective machine) Participation in a TruTops “Drawing” training course
SubjectsOperating the system | maintenance and optimization of data base (shortening values, material management, tool data, machine data) | creation of simple profiles by the profile editor and their unfolding | adaptation of unfolding processes to correct shortening values | input of bending lines with necessary bending data and bend-ing sequences | creating allocation plan (checking and modification of determined tool set-ups) | simulation of the bending sequence | generating NC programs
ObjectivesYou will be able to enter the necessary bending data, select appropriate process- ing strategies and to generate practical NC programs.
Duration of Training Course5 days
TruTops Bend Technology (Programming station)
Tru
Ben
d
Tru
Ben
d
25%
40%
100%
60%
65%
80%
100%
46 47
Tube Processing:
With the TruLaser Tube machines, you can produce parts
quickly and precisely, in addition to being well prepared to
meet all market requirements. What's so exceptional about
the TruLaser Tube? The laser cuts contours and trims tubes in
one operation. Tube constructions that are made possible by
the laser, facilitate and reduce downstream fabrication steps.
The edges are smooth and the parts are ready for assembly
without the need for refinishing.
Do you want to make the best use of all of the functions on
your TruLaser Tube? Well, we have put together a training
package that meets your requirements perfectly! Choose the
appropriate courses from the training program and perfect
the use of your machine.
Machine TypesTruLaser Tube 5000
TruLaser Tube 7000
TubeTruLaser
The above diagram shows the sequence in which the courses should be taken, the
level of knowledge you will attain and the length of each course. Course modules
highlighted in blue provide programming knowledge. Courses highlighted in green
help unlock your machine's potential and keep it in top form. In the darker boxes,
you will find optional courses that expand your knowledge in special fields. Training
schedules and course descriptions are listed on the following pages.
TruTops TubeDrawing
1 day
TruTops TubeTechnology
4 days
expertise
TruTops TubeUpdate
1 day
time t
Operator Course4 days
Maintenance Course3 days
Instruction on-site
Basic Programming Course3 days
> 3 months
3D Tube Design2 / 5 days
Application Consulting
Application Consulting
Maintenance Laser
Core Programming Courses Core Machine Courses Optional Courses Application Consulting
Programming Courses
Machine Courses
Mac
hine
pur
chas
e
Mac
hine
inst
alla
tion
and
star
t-up
TechnologyTube Cutting
4 days
TechnologyTube Cutting
Special Profiles1 day
expertise
Tru
Lase
r Tu
be
48 49
PrerequisitesPC knowledge
For tube programming the training courses "TruTops Tube Drawing“ and "TruTops Tube Technology“ are required
SubjectsIntroduction into 3D design | tube program-ming | creating 3D tube models | reading in and editing external drawings | export tube designs in TruTops Tube
ObjectivesYou will be able to draw individual tubes and to design complex 3D tube models. You will develop tubes for further processing in TruTops Tube.
Duration of Training Course5 days
3D Tube Design
PrerequisitesPC knowledge
In-depth experience in handling parametric 3D CAD systemsFor tube programming the training courses "TruTops Tube Drawing“ and "TruTops Tube Technology“ are required
SubjectsTube programming | creating 3D tube models | reading in and editing external drawings | export tube designs in TruTops Tube
ObjectivesYou will be able to draw individual tubes and to design complex 3D tube models. You will develop tubes for further processing in TruTops Tube.
Duration of Training Course2 days
3D Tube Design for Experienced 3D Designers
TruLaser Tube Programming Courses
PrerequisitesPC knowledge
SubjectsMachine components | technical data | basic NC programming | complete files | editing of NC programs and tables | laser operat-ing modes | technological information on laser cutting | production plan
ObjectivesYou will acquire basic technical knowledge necessary for TruTops Tube and you will be able to interpret NC texts.
Duration of Training Course3 days
Basic Course
TruLaser Tube 5000 / 7000
PrerequisitesPC knowledge
This training course is not required for those with prior knowledge of TruTops Laser / Punch / Bend Drawing
SubjectsModular structure of software | introduction to how to operate | drawing of work piece geometries | reading in and preparing DXF, IGES and MI drawings
ObjectivesYou will be able to draw part geometries and import other drawings in TruTops.
Duration of Training Course1 day
TruTops Tube Drawing
TruLaser Tube 5000 / 7000
PrerequisitesPC knowledge Participation in a TruTops training course "Drawing" Participation in a basic training course to program your machine (or: comprehensive experience in operating the respective machine)
SubjectsProgramming of round and/or rectangular tubes and free profiles | draw developed contours or develop them as DXF, IGES and/or MI on the tube | programming laser processing processes | optimizing the processing process | creating NC programs | tube layout with identical and differing parts | creating production plans and service programs
ObjectivesYou will acquire the knowledge you need to program your machine. You will be able to draw workpieces, select suitable processing strategies and to create success-ful NC programs.
Duration of Training Course4 days
TruTops Tube Technology
TruLaser Tube 5000 / 7000
TruLaser Tube Machine Courses
PrerequisitesTechnically-oriented vocational training
SubjectsMachine discussion | structure and compo-nents of machine | structure and adjust-ment of laser cutting head | training the user interface, operating elements and operating sequences with exercises | presentation of the diagnostics system and online help | program manage-ment | important NC programming func-tions | machine options
ObjectivesYou will be able to handle the machine’s operating elements and to prepare, initiate and influence the production process.
Duration of Training Course4 days
Operator Course
TruLaser Tube 5000 / 7000
PrerequisitesExperience with TruLaser Tube 5000 / 7000 operating and/or programming experience with TruTops Tube (at least 3 - 6 months respectively)
Recommendation: joint participation operator and programmer
SubjectsIn-depth safety instructions | cutting-specific laser basics | familiarizing with the parameters influencing the laser cut | quality assessment and optimization of laser cuts | recognizing and clearing cut-ting problems | programming and cutting special materials and special profile
ObjectivesYou will be able to increase the cutting quality on a TruLaser Tube to the optimum, create programs for special materials and special profiles and establish the pertaining cutting parameters.
Duration of Training Course4 days
PrerequisitesParticipation in the training course "Technology Tube Cutting" or at least 12 months of experience in machine operating, programming and parameter optimization
SubjectsDeveloping a systematic procedure to process special profiles - special profile pro-gramming in TruTops Tube - Implementing and processing these special profiles on the TruLaser Tube 5000 / 7000
ObjectivesYou will be able to implement a systematic procedure to process special profiles on your machine.
Duration of Training Course1 day
PrerequisitesTechnically-oriented vocational training
Particular topics of maintenance / service require a qualification as verified electrical engineer
SubjectsGetting familiar with the components of the system | detailed safety instructions | external beam path | adjustment jobs and handling the cutting head | design of the control PLCX/MMC/NCK | diagnostic pos-sibilities with the control | installation of the dust extractor | explanation of Maintenance works for machine and laser unit | options of the machine | pneumatic, gas, lubrication and circuit diagrams
ObjectivesYou will be able to maintain the machine according to the given maintenance intervals.
Duration of Training Course3 days
Technology Tube Cutting
TruLaser Tube 5000 / 7000
Technology Tube CuttingModule Special ProfilesTruLaser Tube 5000 / 7000
Maintenance Course
TruLaser Tube 5000 / 7000
Tru
Lase
r Tu
be
Tru
Lase
r Tu
be
50 51
Machine Courses Control Duration
Operator Courses
TruLaser Tube 5000 TUBEMATIC
SIN 840 D 4 days
TruLaser Tube 7000 SIN 840 D sl 4 days
Technology Course
Tube Cutting TruLaser Tube 5000 / 7000 SIN 840 D / D sl 4 days
Tube Cutting Module Special Profiles TruLaser Tube 5000 / 7000 SIN 840 D / D sl 1 day
Maintenance Courses
TruLaser Tube 5000 TUBEMATIC
SIN 840 D 3 days
TruLaser Tube 7000 SIN 840 D sl 3 days
Maintenance Courses
TruFlow Laser Part 1 - 3 TLF Laser Part 1 - 3
TASC 3 each 5 days
TruLaser Tube
Programming Courses Control Duration
Basic Programming Courses
TruLaser Tube 5000 / 7000 TUBEMATIC
3 days
TruTops Programming Courses
TruTops Tube Drawing for TruLaser Tube 5000 / 7000 1 day
TruTops Tube Technology for TruLaser Tube 5000 / 7000 4 days
3D Tube Design 5 days
3D Tube Design for Experienced 3D Designers 2 days
TruTops Tube Update 1 day
NEW
NEW
Consulting Control Duration
Application Consulting / Production assistance According to demand
after the introduction of relevant software updates
for detailed course information see chapter 'Supplementary Courses'
for detailed course information see chapter 'Consulting / Seminars'
For the latest schedules and course availability
please check our website at
www.mytrumpf.com/training/en
For the latest schedules and course availability
please check our website at
www.mytrumpf.com/training/en
Tru
Lase
r Tu
be
Tru
Lase
r Tu
be
60%
80%
100%
60%
65%
80%
100%
52 53
Machine TypesTruLaser Cell 3010
TruLaser Cell 7020 | 7040
TruLaser Cell 7020 fiber | 7040 fiber
TLC 1000
TLC 1005 | 6005
TLC CUT 5
3D Laser Processing:
The machines of the TruLaser Cell open up all the possibilities
of laser processing to you. Be it laser cutting or laser welding,
3D or 2D workpieces, single parts or serial production – with
the TruLaser Cell you have an all around machine at your
disposal for laser processing.
Acquire a broad base of knowledge to exploit the full poten-
tial of your TruLaser Cell. In our training courses, you will learn
everything you need to achieve top performance with your
machine.
CellTruLaser
The above diagram shows the sequence in which the courses should be taken, the
level of knowledge you will attain and the length of each course. Course modules
highlighted in blue provide programming knowledge. Courses highlighted in green
help unlock your machine's potential and keep it in top form. In the darker boxes,
you will find optional courses that expand your knowledge in special fields. Training
schedules and course descriptions are listed on the following pages.
Operator CourseSeamLine
1.5 days
Core Programming Courses Core Machine Courses Optional Courses
Teaching I2 days
TruTops Cell3.5 + 0.5 + 1 + 1.5 days
TruTops Laser2.5 + 3 days
Teaching IIon-site2 days
expertise
TruTops CellUpdate
1 day
Operator Course3 / 4 days
Maintenance Laser
expertise
time t
Basic Operator Course
1 day
TechnologyLaser Welding
2.5 days
Maintenance Course2.5 days
Instruction on-site
Basic Programming Course5 days
> 3 months
Measuring Probe /SeamLine
2 days
TruTops TubeTechnology
3 days
3D Tube Design2 / 5 days
Variable Programming
2.5 days
ConfigurableControl Interface
1.5 days
Programming Courses
Machine Courses
Mac
hine
pur
chas
e
Mac
hine
inst
alla
tion
and
star
t-up
Application Consulting
Application Consulting
Tru
Lase
r C
ell
54 55
Basic Programming Course
3D Laser
PrerequisitesPC knowledgeTechnically-oriented vocational training
SubjectsMachine components | technical data | ba-sics of NC programming | program move-ments, interpolation types | influence how machine moves | subroutine technology | laser programming | program editor
ObjectivesYou will be able to create NC programs for flat sheets and tubes as well as to optimize them.
Duration of Training Course5 days
PrerequisitesParticipation in the 3D Laser "Operator Course" | Participation in the basic training course on programming your machine is recommended
SubjectsBasics of teaching | functions of 5-axis software | possibilities of teach software | teaching exercises in running-in and opti-mizing machine
ObjectivesYou will be able to program 3D parts by the teach procedure and to optimize programs.
Duration of Training Course2 days
Teaching I
3D Laser
PrerequisitesParticipation in the training course "Opera-tor Course TruLaser Cell Series 7000" and in the basic training course to program your machine
SubjectsUser interface | create module | configure and activate | integrate module configura-tion in the automatic mode | activate data channel | diagnostics functions
ObjectivesYou will acquire the theoretical and practical principles required for program-ming/operating. You are ready to handle the configurable control interface to make full use of it.
Duration of Training Course1.5 days
Programming configurable Control Interface3D Laser
PrerequisitesGood NC programming knowledgeMathematical knowledge (e.g. sine/cosine)
SubjectsTypes of variables | phasors | functions | jump commands | control structures | subroutines | global programs
ObjectivesYou learn the different possibilities of vari-able programming.
Duration of Training Course2.5 days
Variable Programming
3D Laser
PrerequisitesParticipation in the training course "TruTops Cell Technology"
SubjectsCreating parameterized contour fields for coating | optimization of processing speci-fications regarding coating technology
ObjectivesYou will be able to create practical NC programs for 3D part coating.
Duration of Training Course1.5 days
TruTops Cell TechnologyLaser Metal Deposition3D Laser
TruLaser Cell Programming Courses TruLaser Cell Machine Courses
PrerequisitesTechnically-oriented vocational training
SubjectsStudying machine components (laser, cut-ting optics / welding optics, FocusLine, …) |inputting dimensions, moving modes in general | structure and content of laser technology tables | zero point correction and setting zero points
ObjectivesYou will acquire knowledge to participate in the 3D Laser "Operator Course" with-out previously participating in the basic training course to program your machine.
Duration of Training Course1 day
PrerequisitesThe Participation in the basic training course to program your machine is re- commended alternatively for TruLaser Cell Series 7000: participation in the "Basic Operator Course TruLaser Cell Series 7000"
SubjectsPresentation of machine | safety instruc-tions on working with a laser | structure and machine components | training the user interface, operating elements and operating sequences with exercises | ad-justment jobs on machine | structure and adjustment of processing heads | service programs | manage programs | implemen-tation of studied programming commands
ObjectivesYou will acquire necessary theoretical and practical basic knowledge for operating the machine, you are prepared to handle the operational elements of the machine and you can prepare, initiate and influence the production process.
Duration of Training Course3 / 4 days
PrerequisitesParticipation in the 3D Laser "Operator Course"
SubjectsSafety tips for welding | welding-specific laser basics | variables influencing welding |practical welding exercises | influence of process parameters on the welding pro-cess | welding of the most various materi-als | assessing welding seam
ObjectivesYou will be able to establish welding parameters and improve them.
Duration of Training Course2 / 2.5 days
PrerequisitesTechnically-oriented vocational training
Particular topics of maintenance / service require a qualification as verified electrical engineer
SubjectsMachine structure | technical data | safety instructions | principle of generating the beam | external beam guidance | checking the alignment | centring laser beam | chiller | de-dusting unit | drives | maintenance and adjustment jobs | diagnostics possibilities on the control | care and lubrication of ma-chine according to maintenance overview
ObjectivesYou will be able to maintain the machine according to given intervals.
Duration of Training Course2.5 / 3 days
Maintenance Course
3D Laser
PrerequisitesParticipation in the basic training course to program your machine
SubjectsProgramming measuring functions | pro-gramming calculation cycles to correct the coordinate system | programming measur-ing functions in TruTops Cell
ObjectivesYou will be able to program the measuring functions for ControlLine, the measuring probe and SeamLine both manually and in TruTops Cell.
Duration of Training Course2 days
Programming Measuring Probe and SeamLine3D Laser
Basic Operator Course
TruLaser Cell Series 7000
Operator Course
3D Laser
Technology Laser Welding
3D Laser
PrerequisitesPC knowledgeParticipation in the basic training course to program your machineIdeal: participation in the training course "Teaching TruLaser Cell Series 7000" or "Teaching TLC 1000 / 1005 / 6005 / CUT 5"
SubjectsImporting and preparing 3D drawings in TruTops Cell | processing 3D models | optimization of processing process | adapt-ing 3D models in TruTops Cell to the actual position of the workpiece in the machine
ObjectivesYou will be able to generate practical NC programs from 3D models.
Duration of Training Course3.5 days
TruTops Cell Technology
3D Laser
PrerequisitesPC knowledgeParticipation in the basic training course to program your machine and the training course “TruTops Cell Technology”
SubjectsPreparing and processing of moved work- pieces (are also turned by the rotary axis) |with or without turning of the cutting head “bevel cut”
ObjectivesYou will be able to generate practical NC programs for parts clamped in the rotary axis.
Duration of Training Course 0.5 days
TruTops Cell Module Rotary Axis3D Laser
PrerequisitesPC knowledge Participation in the basic training course to program your machine and the training course “TruTops Cell Technology”
SubjectsDesigning cutting fixtures by means of a 3D model | programming and/or exporting (e.g. TruTops Laser) the individual parts of the fixture
ObjectivesAbility to design fixtures for cutting parts.
Duration of Training Course1 day
TruTops Cell Module Fixture Design3D Laser
Operator Course SeamLine
3D Laser
PrerequisitesParticipation in the "Operator Course TruLaser Cell Series 7000" Participation in the basic training course to program your machine is recommended
SubjectsMeasurement procedure incident light / light section | adjust monitor and oper-ate user interface | calibrate seam sensor | adjust parameters for image analysis
ObjectivesYou will acquire the required theoretical and practical principles for operating. You will be ready to handle the seam sensor system SeamLine, able to prepare, initiate and influence the measurement process.
Duration of Training Course1.5 days
Tru
Lase
r C
ell
Tru
Lase
r C
ell
56 57
Programming Courses Control Duration
Basic Programming Courses
TruLaser Cell 3010 / 7020 / 7040 and TLC 1000 / 1005 / 6005 / CUT 5 5 days
Manual Programming Courses
Teaching I TruLaser Cell 3010 2 days
Teaching I TruLaser Cell Series 7000 2 days
Teaching I TLC 1000 / 1005 / 6005 / CUT 5 2 days
Teaching II TruLaser Cell Series 7000 and TLC 1000 / 1005 / 6005 / CUT 5 2 days
Programming Measuring Probe and SeamLine for TruLaser Cell Series 7000 (as of software version 4.0)
2 days
Programming configurable Control Interfacefor TruLaser Cell Series 7000
1.5 days
Variable Programming 2.5 days
TruTops Programming Courses
TruTops Cell Technology Cutting and Welding for 5-axis Laser Machines 3.5 days
TruTops Cell Module Rotary Axis 0.5 days
TruTops Cell Module Fixture Designing 1 day
TruTops Cell Technology Laser Metal Deposition 1.5 days
TruTops Cell Update 1 day
TruTops Laser Drawing and Nesting 2.5 days
TruTops Laser Technology 3 days
TruTops Tube Technology for RotoLas 3 days
3D Tube Design 5 days
3D Tube Design for Experienced 3D Designers 2 days
Supplementary Programming Courses
TruTops Unfold 1 day
Machine Courses Control Duration
Operator Courses
Basics TruLaser Cell Series 7000 SIN 840 D 1 days
TruLaser Cell 3010 SIN 840 D 3 days
TruLaser Cell Series 7000 SIN 840 D 4 days
SeamLine für TruLaser Cell Series 7000 (as of software version 4.0) SIN 840 D 2 days
TLC 1000 / 1005 / 6005 / CUT 5 SIN 840 D 3 days
Technology Courses
Laser Welding TruLaser Cell Series 7000 (as of software version 4.0) SIN 840 D 2.5 days
Laser Welding TruLaser Cell Series 7000 (up to software version 3.0) SIN 840 D 2.5 days
Laser Welding TLC 1000 / 1005 / 6005 SIN 840 D 2 days
Maintenance Courses
TruLaser Cell Series 7020 / 7040 SIN 840 D 2.5 days
TLC 1000 / 1005 / 6005 / CUT 5 SIN 840 D 3 days
Maintenance Courses
TruFlow Laser Part 1 - 3 TLF Laser Part 1 - 3
TASC 3 each 5 days
TruLaser Cell
NEW
NEW
NEW
NEW
NEW
NEW
NEW
Consulting Control Duration
Application Consulting / Production assistance According to demand
after the introduction of relevant software updates
after the introduction of relevant software updates
for detailed course information see chapter 'Supplementary Courses'
for detailed course information see chapter 'Supplementary Courses'
for detailed course information see chapter 'TruLaser Tube'
for detailed course information see chapter 'TruLaser Tube'
for detailed course information see chapter 'TruLaser'
for detailed course information see chapter 'TruLaser'
for detailed course information see chapter 'TruLaser'
For the latest schedules and course availability
please check our website at
www.mytrumpf.com/training/en
For the latest schedules and course availability
please check our website at
www.mytrumpf.com/training/en
Tru
Lase
r C
ell
Tru
Lase
r C
ell
65%
60%
100%
100%
58 59
3D Laser Processing:
RobotTruLaser
The modular concept of the TruLaser Robot Series 5000
epitomizes a system perfectly customized to you and
your requirements and opens up for you all possibilities of
laser processing not just in welding, but also laser contract
welding and laser cutting of 3D or 2D workpieces.
Interested in how to fully exploit the high performance of the
TruLaser Robot Series 5000? Check out our extensive,
multi-faceted training program and learn everything you need
to most efficiently make use of the individual solutions of
this machine.
Machine TypesTruLaser Robot 5020
TruLaser Robot 5120
The above diagram shows the sequence in which the courses should be taken, the
level of knowledge you will attain and the length of each course. Course modules
highlighted in blue provide programming knowledge. Courses highlighted in green
help unlock your machine's potential and keep it in top form. In the darker boxes,
you will find optional courses that expand your knowledge in special fields. Training
schedules and course descriptions are listed on the following pages.
Core Programming Courses Core Machine Courses Optional Courses
TruTops CellModule Rotary Axis
0,5 days
TruTops Cell Technology Laser Metal Deposition
1,5 days
TechnologyWeld Wire
1 day
TruTops CellModule Fixture
Design1 day
TruTops CellTechnology
Cutting and Welding3,5 days
TechnologyTeachLine
3 days
TechnologyRotary Axis
1 day
MaintenanceLaser2 days
time t
TechnologyLaser Cutting
2,5 days
TechnologyProgrammable
Foccusing Optics2 days
Instruction on-site
> 3 months
Application Consulting
Application Consulting
Programming Courses
Machine Courses
Mac
hine
pur
chas
e
Mac
hine
inst
alla
tion
and
star
t-up
TechnologyLaser MetalDeposition
2 days
expertise
Operator and Programming Course TruLaser Robot Series 5000
10 days
expertise
Tru
Lase
r R
ob
ot
Tru
Lase
r R
ob
ot
60 61
TruTops Cell Technology Cutting and Welding for TruLaser Robot 3D Laser
PrerequisitesLaser cutting or welding technology and knowledge on TruLaser Robot programming
SubjectsImporting and preparing 3D drawings in TruTops Cell | processing 3D models | optimisation of processing process | adapt-ing 3D models in TruTops to the actual position of the work piece in the machine | programming of a rotary/tilt table
ObjectivesYou are able to generate practical NC pro-grams from 3D models.
Duration of Training Course 3,5 days
TruTops Cell TechnologyLaser Metal Deposition3D Laser
TruTops Cell Module Rotary Axis3D Laser
TruTops Cell Module Fixture Design3D Laser
RequirementsPC knowledgeTechnically-oriented vocational training
SubjectsSafety instructions | operating elements and operation of cell, robot and additional axes and adjustment jobs | robot program-ming for laser cells and additional axes | basics of laser welding | process parameter adjustment | assessment of weld seam
ObjectivesYou will be able to operate the TruLaser Robot Series 5000 and you will acquire the required robot knowledge and be able to establish and improve welding parameters.
Duration of Training Course10 days
RequirementsPC knowledgeParticipation in the "Operator and Progam-ming Course TruLaser Robot Series 5000"
SubjectsMeasuring procedure incident light and light section | teaching by the TeachLine Sensor | adjust monitor and operate user interface | adjust parameters for image analysis | TeachLine programming on the robot control
ObjectivesYou will acquire the required theoretical and practical principles for operating and programming and be ready to handle the TeachLine sensor system. You will be able to prepare, initiate and influence the meas-urement process.
Duration of Training Course3 days
RequirementsPC knowledgeParticipation in the "Operator and Progam-ming Course TruLaser Robot Series 5000"
SubjectsEMT measurement of rotary axis | coupling and uncoupling of rotary axis | adjust parameters for the rotary axis | rotary axis programming on the robot control
ObjectivesYou will acquire the required theoretical and practical principles for operating and programming. You will be able to safely handle the rotary axis.
Duration of Training Course1 day
Operator and Progamming Course3-D-Laser
Technology TeachLine
TruLaser Robot 5020
Technology Rotary Axis
TruLaser Robot 5020
Technology Weld Wire
TruLaser Robot 5020
RequirementsPC knowledgeParticipation in the "Operator and Progam-ming Course TruLaser Robot Series 5000"
SubjectsWeld wire feed roller replacement | adjust parameters for weld wire | weld wire programming on the robot control | tech- nology weld wire
ObjectivesYou will acquire the required theoretical and practical principles for operating and programming and be ready to handle the weld wire. You will be able to establish and improve welding parameters.
Duration of Training Course1 day
PrerequisitesPC knowledge Participation in the basic training course to program your machine and the training course “TruTops Cell Technology”
SubjectsDesigning cutting fixtures by means of a 3D model | programming and/or exporting (e.g. TruTops Laser) the individual parts of the fixture
ObjectivesAbility to design fixtures for cutting parts.
Duration of Training Course1 day
PrerequisitesPC knowledgeParticipation in the basic training course to program your machine and the training course “TruTops Cell Technology”
SubjectsPreparing and processing of moved work- pieces (are also turned by the rotary axis) |with or without turning of the cutting head “bevel cut”
ObjectivesYou will be able to generate practical NC programs for parts clamped in the rotary axis.
Duration of Training Course 0.5 days
PrerequisitesParticipation in the training course "TruTops Cell Technology"
SubjectsCreating parameterized contour fields for coating | optimization of processing speci-fications regarding coating technology
ObjectivesYou will be able to create practical NC programs for 3D part coating.
Duration of Training Course1.5 days
Tru
Lase
r R
ob
ot
Tru
Lase
r R
ob
ot
62 63
RequirementsPC knowledgeParticipation in the "Operator and Program-ming Course TruLaser Robot Series 5000"
SubjectsSafety tips on working with the laser | align Programmable Focussing Optics to the processing plane | operate and adjust Pro- grammable Focussing Optics | establish and adjust process parameters | mainte-nance | practical process parameter establishing | impact of process parameters on the weld | assessment of weld
ObjectivesYou will acquire the required theoretical and practical principles for operating and programming and handling the Program-mable Focussing Optics. You will be able to establish and improve welding parameters.
Duration of Training Course 2 days
Technology Programmable Focussing OpticsTruLaser Robot 5020
RequirementsPC knowledgeParticipation in the "Operator and Progam-ming Course TruLaser Robot Series 5000"
SubjectsSafety tips on working with the laser | cutting-specific laser basics | factors influencing the laser cut | practical process parameter establishing | impact of process parameters on the laser cut | cutting different materials | assessment of cutting quality
ObjectivesYou will acquire the required theoretical and practical principles for operating and programming and handling the laser optics. You will be able to establish and improve cutting parameters.
Duration of Training Course2,5 days
Technology Laser Cutting
TruLaser Robot 5020
Technology Laser Metal DepositionTruLaser Robot 5020
RequirementsPC knowledgeParticipation in the "Operator and Progam-ming Course TruLaser Robot Series 5000"
SubjectsSafety tips on working with the laser and metal powder | Technology Package DepositionLine | operate and adjust powder conveyor | establish and adjust process parameters | maintenance | practical process parameter establishing | impact of process parameters on the coating | assessment of coating
ObjectivesYou will acquire the required theoretical and practical principles for operating and programming and handling optics. You will be able to establish and improve coating parameters.
Duration of Training Course2 days
Tru
Lase
r R
ob
ot
Tru
Lase
r R
ob
ot
64 65
Programming Courses Control Duration
Robot Programming Courses
Operator and Programming Course TruLaser Robot Series 5000 10 days
TruTops Programming Courses
TruTops Cell Technology Cutting and Welding for TruLaser Robot 3,5 days
TruTops Cell Technology Laser Metal Deposition 1,5 days
TruTops Cell Module Rotary Axis 0,5 days
TruTops Cell Module Fixture Designing 1 day
3D Tube Design 5 days
3D Tube Design for Experienced 3D Designers 2 days
Machine Courses Control Duration
Operator and Programming Courses
TruLaser Robot Series 5000 Kuka 10 days .
Technology Courses
TeachLine TruLaser Robot 5020 Kuka 3 days
Weld Wire TruLaser Robot 5020 Kuka 1 day
Rotary Axis TruLaser Robot 5020 Kuka 1 day
Laser Cutting TruLaser Robot 5020 Kuka 2,5 days
Laser Metal Deposition TruLaser Robot 5020 Kuka 2 days
Focussing Optics TruLaser Robot 5020 Kuka 2 days
Consulting Control Duration
Application Consulting / Production assistance According to demand
TruLaser Robot
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
for detailed course information see chapter 'TruLaser Tube'
for detailed course information see chapter 'TruLaser Tube'
for detailed course information see chapter 'Machine Courses'
for detailed course information see chapter 'Consulting / Seminars'
For the latest schedules and course availability
please check our website at
www.mytrumpf.com/training/en
For the latest schedules and course availability
please check our website at
www.mytrumpf.com/training/en
Tru
Lase
r R
ob
ot
Tru
Lase
r R
ob
ot
66 67
Supplementary
Courses
Topic:
This encompasses all courses dealing with the technology-
spanning topics of programming and maintenance of your
products. Learn how to use TruTops Fab, the TRUMPF soft-
ware for controlling and planning your sheet metal fabrica-
tion, or to use TruTops Unfold for unfolding 3D models.
In addition to this, we offer a complete range of maintenance
courses for modular switch cabinets and for the TruFlow and
TruCoax lasers.
The above diagram shows a list of supplementary courses and their duration. Course
modules highlighted in blue provide programming knowledge. Courses highlighted
in green impart knowledge in special areas of maintenance. Training schedules and
course descriptions are listed on the following pages.
Optional Courses
time t
TruTopsUnfold
1 day
Variants3 days
TruTops FabStorage1,5 days
TruTopsCalculate
1 day
TruTops FabProduction
0.5 days
TruTops FabQuickjob
3 days
TruTops FabPurchasing
1 day
TruTops FabCalculation
1 day
MaintenanceTruFlow RF generator | Part 3
5 days
MaintenanceTruFlow RF generator | Part 3
5 days
MaintenanceModular Switch Cabinet
2 days
MaintenanceTruFlow 5000 to 8000 | Part 2
5 days
MaintenanceTruFlow 8000 to 15000 | Part 2
5 days
MaintenanceTruFlow 5000 to 8000 | Part 1
5 days
MaintenanceTruFlow 8000 to 15000 | Part 1
5 days
MaintenanceTruDisk 2002 to 8002
4 days
MaintenanceTruFlow RF generator | Part 3
5 days
MaintenanceTruFlow 2000 to 4000 | Part 2
5 days
MaintenanceTruFlow 2000 to 4000 | Part 1
5 days
Mac
hine
inst
alla
tion
and
star
t-up
TruTops FabCustomer
1 day
TruTops Fabfor Administrators
2 days
Programming Courses
Technical Courses
Mac
hine
pur
chas
e
MaintenanceTruCoax 2000 to 3200
3 days
Sup
ple
men
tary
Co
urs
es
68 69
TruTops ProductsTruTops Laser / Punch
Target GroupKey users and TruTops programmers
PrerequisitesExtensive PC knowledge
SubjectsSystem overview | measures to prepare the installation | TruTops Fab user interface | management and control of production orders | create nesting jobs (TruTops Laser / Punch) | definition of operations and work plans | most important aspects of material management | maintenance of material and customer data | workplace management | manufacturing data management and reporting - monitoring functionality
ObjectivesYou will be able to implement the TruTops Fab module Quickjob successfully.
Duration of Training Course3 days
TruTops ProductsTruTops Laser / Punch
Target GroupKey users and purchasing agents
PrerequisitesParticipation in the "TruTops Fab Module Quickjob"
SubjectsRequests for quotation | order manage-ment | suppliers management
ObjectivesYou will acquire the knowledge necessary for managing requests for quotation, for order and suppliers data management.
Duration of Training Course1 day
TruTops Fab
Module Quickjob
TruTops Fab
Module Purchasing
TruTops ProductsTruTops Laser / Punch
Target GroupKey users and TruTops programmers
PrerequisitesParticipation in the "TruTops Fab Module Quickjob"
SubjectsTruTops Fab user interface | managing and controlling production orders by consider-ing sub-assemblies | definition of sub- assembly-specific operations and work plans | creating the corresponding work-places and workplace groups
ObjectivesYou will be able to implement the TruTops Fab module Production successfully.
Duration of Training Course0.5 days
TruTops ProductsTruTops Laser / Punch
Target GroupKey users and storage system managers
PrerequisitesParticipation in the "TruTops Fab Module Quickjob"
SubjectsBasics of storage management (manual storage) | configuration and managing of different storage locations and sectors | batch management | graphic display of material use | inventory list
ObjectivesYou will acquire the knowledge necessary for managing requests for quotation, for order and suppliers data management.
Duration of Training Course1.5 days
TruTops Fab
Module Production
TruTops Fab
Modul Storage
TruTops ProductsTruTops Laser / Punch
Target GroupUsers in charge of preliminary cost calcula-tion of sheet metal parts
PrerequisitesBasic PC knowledge
SubjectsSoftware customization and data manage-ment | preparing cost calculations for in- dividual workpieces and sub-assemblies | vectorization of graphics files (option)
ObjectivesYou will acquire the knowledge required to prepare cost calculations based on your individual cost situation.
Duration of Training Course1 day
TruTops FabModule Calculation / TruTops Calculate
TruTops ProductsTruTops Laser / Punch / Bend
PrerequisitesTruTops Drawing (the option Dimensioning Module would be beneficial)Mathematical knowledge (such as angle functions) Knowledge of Microsoft Excel
SubjectsAutomation of creation of variants (similar drawings which can be created from an existing GEO file by the functions “modify” menu, e.g. stretch, displace, copy,…) | vari-ants depending on conditions (e.g. number of holes depending on the length) | vari- able hole patterns (calculated by arithme-tic formulas) | creation of all single parts required for a complete sub-assembly, e.g. create a cupboard by simply modifying the total length, width and height | export and import of variant files
ObjectivesYou will be able to create similar part drawings (*.geo) automatically.
Duration of Training Course3 days
Variants
TruTops ProductsTruTops Laser / Punch
Target GroupKey users and TruTops programmers
PrerequisitesParticipation in the "TruTops Fab Module Quickjob"
SubjectsTruTops Fab user interface | function area customer order management | managing and controlling of customer orders from quotations to invoicing | customer data management, preparation of quotations, order confirmation, production, delivery and invoicing as well as debt collection and credit notes are particularly considered
ObjectivesYou will acquire knowledge to implement the TruTops Fab module Customer success-fully.
Duration of Training Course1 day
TruTops Fab
Module Customer
TruTops ProductsTruTops Laser / Punch
Target GroupIT administrators, PC support personnel
PrerequisitesProfound IT knowledge: PCs, data bases, network administration
SubjectsSystem adjustment, data maintenance, print layout adjustment, troubleshooting and reaction
ObjectivesYou will be able to administer a TruTops Fab system.
Duration of Training Course2 days
TruTops Fabfor Administrators
PrerequisitesPC knowledge
Basics of unfolding technique
SubjectsLoading and unfolding components | single parts | volume models | surface models | data bank adaptation | populate materials and tools in the TruTops Unfold data base
ObjectivesYou will be able to unfold 3D models avail-able in the common exchange formats. You create a 2D drawing in the GEO or DXF format.
Duration of Training Course1 day
TruTops Unfold
Supplementary Programming Courses
Sup
ple
men
tary
Co
urs
es
Sup
ple
men
tary
Co
urs
es
70 71
Supplementary Technical Courses Supplementary Technical Courses
Machine TypesTruLaser 2025 / 2030 / 3030 (L20) / 3040 (L32) / 5030 classic / 5030 fiber / 5030 / 5040 / 5040 (L18) / 5060 (L19), TruMatic Series 3000 / 7000, TruPunch 1000 / 3000, TruLaser Tube 7000, OEM Laser with Modu-lar Switch Cabinet
PrerequisitesElectrotechnical basic knowledge with the qualification verified electrical engineer
SubjectsStructure and diagnostics of the modular switch cabinet | function and diagnostics of the Profi and Asi bus as well as the safety system
ObjectivesYou will be able to commission and diagnose machines with modular control cabinets, read the schematics as well as diagnose the Profi and the Asi bus plus the corresponding safety system.
Duration of Training Course2 days
Maintenance Course
Modular Switch Cabinet
Maintenance CourseTruCoax 2000 to 3200
PrerequisitesTechnically-oriented vocational training
Particular topics of maintenance / service require a qualification as verified electrical engineer
SubjectsLaser technology basics | structure of TruCoax laser | safety instructions | struc-ture of laser control | laser operation |schematics structure | structure and func-tion of LS3 and TASC 3 control | resonator components | basics of gas and vacuum system | cooling system | maintenance works at laser, RF generator and chiller | working on the beam generator | power measurement | beam alignment | align-ment laser | error simulation | diagnostics systems
Note: the tasks are performed at a TruCoax laser without machine connection.
ObjectivesYou will be able to perform maintenance jobs, know functional sequences, localize laser malfunctions and clear them, if re-quired, and to communicate error diagnos-tics to the TRUMPF service department.
Duration of Training Course 3 days
PrerequisitesTechnically-oriented vocational training
Note: TruFlow 2000 - 8000 have the laser no. D0004.... /D0008..../D0009....TruFlow 8000 - 15000 have the laser no. D0005....
SubjectsBasics of laser technology | design of TruFlow lasers | safety instructions | switch cabinet structure | laser operation | structure of schematics | safety circuit structure | basics of gas and vacuum system | cooling system | maintenance works on lasers, RF generator and chiller | data back-up | re-placement of output mirror, mode adjust-ment, check beam quality by a series of mode shots | power measurement | beam alignment | alignment laser | error simulation | diagnostics systems
Note: the tasks are performed at a TruFlow laser without machine connection.
ObjectivesYou will be able to perform maintenance jobs, know functional sequences, localize laser malfunctions and clear them, if re-quired, and communicate error diagnostics to the TRUMPF service department.
Duration of Training Course5 days
Maintenance CourseTruFlowPart 1
PrerequisitesParticipation in the "Maintenance Course TruFlow Part 1"
SubjectsStructure, function and communication of TASC 3 | safety instructions | measurements and diagnostics of gas and vacuum system | structure, function and works at beam generator, resonator and mirror system, mirror cleaning | structure, function and diagnostics of frequency converter, LSM and magnetic bearing electronics | chiller | error simulation | diagnostics systems
Note: the works are performed at a TruFlow laser without machine connection.
ObjectivesYou will be able to recognize functional sequences of the TruFlow laser, carry out maintenance and service work, localize and clear laser malfunctions and communicate error diagnostics to the TRUMPF service department.
Duration of Training Course5 days
Maintenance CourseTruFlowPart 2
PrerequisitesParticipation in the Maintenance training course TruFlow part 1 and part 2 Qualification as verified electrical engineer
SubjectsStructure and function of sub-assemblies in the radiofrequency generator | safety instructions | HV power supply module, network distribution, driver stage, end stage and control module | structure of schematics | adjustment | replacement of sub-assemblies | adjustment work and measurements on the RF generator | diagnostics system | analogue values | methodology and problem solution during troubleshooting
ObjectivesYou will be able to know the functions and structure of the RF generator, carry out adjustment and setting work as well as troubleshooting.
Duration of Training Course5 days
Maintenance CourseTruFlowPart 3
PrerequisitesTechnically-oriented vocational training
Particular topics of maintenance / service require a qualification as verified electrical engineer
SubjectsBasics of laser technology | laser safety | laser, optics and supply unit design | CPX control and boards | interface description | TruControl 1000 operation | malfunction and monitoring messages | creation of pulse shapes and laser programs | exercise: error identification | design of laser cool-ing, air treatment and diode power supply | maintenance on cooling system and air handler | general maintenance jobs | elec-tric servicing | basics of laser welding with practical exercises
ObjectivesYou will be able to perform maintenance jobs, know functional sequences, localize laser malfunctions and clear them, if re- quired, and communicate error diagnostics to the TRUMPF Laser Service Department and program the laser or perform align- ment work.
Duration of Training Course4 days
Maintenance CourseTruDisk 2002 to 8002
Sup
ple
men
tary
Co
urs
es
Sup
ple
men
tary
Co
urs
es
72 73
Programming Courses Control Duration
Supplementary Programming Courses
TruTops Fab Module Quickjob 3 days
TruTops Fab Module Production 0.5 days
TruTops Fab Module Storage 1,5 days
TruTops Fab Module Purchasing 1 day
TruTops Fab Module Customer 1 day
TruTops Fab Module Calculation 1 day
TruTops Fab for Administrators 2 days
TruTops Calculate 1 day
TruTops Unfold 1 day
Variants 3 days
Technical Courses Control Duration
Maintenance Courses TruCoax 2000 to 3200
TruCoax 2000 to 3200 TCF 1
TASC 3 3 days
Maintenance Course TruDisk 2002 to 8002
TruDisk 2002 to 8002 (4 C) CPX 4 days
Maintenance Courses TruFlow 2000 to 4000
Part 1 TruFlow 2000 to 4000 Part 1 TLF 2000 to 4000
TASC 3 5 days
Part 2 TruFlow 2000 to 4000 Part 2 TLF 2000 to 4000
TASC 3 5 days
Maintenance Courses TruFlow 5000 to 8000
Part 1 TruFlow 5000 to 8000 Part 1 TLF 5000 to 8000
TASC 3 5 days
Part 2 TruFlow 5000 to 8000 Part 2 TLF 5000 to 8000
TASC 3 5 days
Maintenance Courses TruFlow 8000 to 15000
Part 1 TruFlow 8000 to 15000 Part 1 TLF 8000 to 15000
TASC 3 5 days
Part 2 TruFlow 8000 to 15000 Part 2 TLF 8000 to 15000
TASC 3 5 days
Maintenance Courses TruFlow 2000 to 15000 RF generator
Part 3 TruFlow 2000 to 4000 IS 11 - 22 Part 3 TLF 2000 to 4000 IS 11 - 22
TASC 3 5 days
Part 3 TruFlow 5000 IS 30 Part 3 TLF 5000 IS 30
TASC 3 5 days
Part 3 TruFlow 6000 to 15000 IS 36 - 44 Part 3 TLF 6000 to 15000 IS 36 - 44
TASC 3 5 days
Maintenance Course / Control
Modular Switch Cabinet TruLaser 2025 / 2030 / 5030 classic / 5030 / 5040 / 5040 (L18) / 5060 (L19), TruMatic Series 3000, TruPunch 1000 / 3000
Bosch PNC/MTX | SIN 840 D / D sl
2 days
Modular Switch Cabinet TruLaser 3030 (L20) / 3040 (32) / 5030 fiber SIN 840 D sl 2 days
Modular Switch Cabinet TruMatic 7000 / TruLaser Tube 7000 Bosch MTX / SIN 840 D sl
2 days
Supplementary Courses
NEW
NEW
NEW
NEW
NEW
NEW
NEW
For the latest schedules and course availability
please check our website at
www.mytrumpf.com/training/en
For the latest schedules and course availability
please check our website at
www.mytrumpf.com/training/en
Sup
ple
men
tary
Co
urs
es
Sup
ple
men
tary
Co
urs
es
74 75
Consulting /
Topic:
Application Application Consulting /
Production assistance
Creative Part Design Seminar
Workshop
Production Processes SYNCHRO Information Day
SYNCHRO Business Games
SYNCHRO Workshop
TRUMPF training opportunities range from information days
and seminars, workshops and business simulations, to
custom consulting. The topics are multi-faceted: applications,
sheet metal design, SYNCHRO, the TRUMPF production
system, tools or materials.
With the wide range of opportunities that are offered, there
must be a topic that arouses your interest. Please check
the following pages for course descriptions and schedules.
Office Processes SYNCHRO in the office Information Day
Materials Material sciences
Tools Punching into the 3rd dimension
Seminars
Co
nsu
ltin
g /
Sem
inar
s
76 77
PrerequisitesParticipants have completed the requisite operating and programming courses for your TRUMPF machine
SubjectsImparting application knowledge based on your TRUMPF products | The subject mat-ter is tailored to your needs |
Example: Increase productivity through the use of optimized sheet layouts; reduce part production times by using suitable process-ing strategies; exploit all resources offered by the TruTops programming software; selective use of tools for different applica-tions; analysis and optimization of the production workflow
ObjectivesYou will acquire full potential of machine programming software, being able to improve the quality of parts and compo-nents, boost productivity, increase process reliability in production workflow.
DurationAccording to demand
Application Consulting / Production assistance
Target GroupExecutives
PrerequisitesNone
SubjectsConvey the philosophie of TRUMPF produ-cion system SYNCHRO | present objectives, concepts and action in the implementation of SYNCHRO | getting familiar with princi-ples, methods and tools (SYNCHRO house) | guided plant tour to SYNCHRO stations | discussion and question meeting with a TRUPMF plant manager
ObjectivesYou will be able to understand SYNCHRO and recognize applications.
Duration1 day
SYNCHRO
Information Day
Target GroupExecutives
PrerequisitesKnowledge of the SYNCHRO Information Day would be beneficial
SubjectsConvey the philosophy of TRUMPF produ-cion system SYNCHRO (short form) | objec-tives, concepts and action by implementa-tion I showing company waste | learning process improvements and organizational modification steps with SYNCHRO | guided plant tour to SYNCHRO stations
ObjectivesYou will be able to convince executives of the value of SYNCHRO and to show the potential and practical application of SYNCHRO.
Duration1 day
SYNCHRO
Business games
Target GroupExecutives and employees
PrerequisitesNone, appointments are made individually
SubjectsA topic defined by the customer is processed by executives and employees on-site;advantages and benefit of SYNCHRO is shown by means of practical examples. Among others the following topics can be treated: work flow design | 5A (cleanliness and order logistics (Kanban) | tooling time optimization TPM (total productive mainte-nance) | small-scale production flow | imple-mentation of flow production etc.
ObjectivesYou will be able to understand SYNCHRO and to detect waste. You elaborate first improvement measures and initiate first implementation steps.
DurationAt least 2 to 3 days, depending on selection of topics
SYNCHRO
Workshop
Target GroupExecutives and employees
PrerequisitesNone
SubjectsConvey the office SYNCHRO philosophy |present objectives, concepts and action in the implementation of SYNCHRO | study-ing individual methods (4-stage model) | company tour to office SYNCHRO stations | discussions and questions
ObjectivesYou will be able to understand office SYNCHRO and recognize applications.
Duration1 day
SYNCHRO in the office
Information Day
SubjectsElaborating design and engineering rules | active and creative part design from you daily engineering and/or production life | elaborating new, cost-efficient and pro- cess optimized designs | handling the com- ponents of the sheet metal process | pro-ducing an idea from the workshop in our showroom: from the idea to the finished part
Main topics possible:sheet metal design I tube design I laser welding design
Seminar: Ditzingen-based general training course with trainees from various customersWorkshop: Customer-individual meeting (in Ditzingen and/or onsite)
ObjectivesYou will acquire knowledge and sugges-tions on efficient part designing taking up-to-date production possibilities of sheet metal processing into account.
Duration1 - 3 days
Seminars / WorkshopsPart Design
Target GroupEmployees from the fields production, de-sign engineering, development, purchasing and sales as well as design engineers and operators
PrerequisitesBasic knowledge of materials (e.g. by skilled worker training)
SubjectsNew European material standardization for steels (DIN EN 10027) and aluminium materials (DIN EN 515, DIN EN 573, DIN EN 1706 and DIN EN 1780) | interpretation of standard designations with regard to mate-rial processibility | structure and internal structure of steels and aluminium materials as well as how they are influenced by processing (welding, forming etc.) | opti-mization of manufacturing process with regard to material and processing influence of faults | surface technology
ObjectivesYou will be able to comprehend the Euro-pean Standard Norm and you will get to know the influencing factors concerning the inner structure of the material during the production procedure. This will help you to recognize all faults on time and will optimize your manufacturing process.
Duration2 days
Target GroupDesigners and developers as well as employees from the areas quality manage-ment and process planning
PrerequisitesKnowledge of technical drawing practice
SubjectsDimensions and dimensional tolerances (EN ISO 14660 and new EN ISO 14405-1/-2) | ISO- dimensional tolerance coding (new EN ISO 286-1) | general tolerances (ISO 2768 and new EN ISO 8062) | shape and position tolerances (EN ISO 1101:2008), tolerancing principles | references and refer-ence systems (new EN ISO 5459) | surface roughness (among other things new EN ISO 1302) | acceptance criteria for surfaces
ObjectivesYou will be able to comprehend the es-sential standard modifications in the wake of conversion to international standards, recognize faulty, ambiguous or unclear records in technical drawings, understand important "default rules" and safely inter-pret new ISO symbolism as well as optimize design drawings.
Duration2 days
Material sciences - selection, processing and standardization of sheet metal materials
Dimension, shape, position and surface tolerances for sheetmetal parts
Machine TypesTruPunch 1000 / 2020 / 3000 / 5000, TruMatic 3000 / 6000 / 7000, TRUMATIC 2000 R
Target groupDesign engineers and operators
SubjectsThe TRUMPF tool system | reduction of production costs by TRUMPF tools | flexible forming processes (component optimiza-tion, design engineering guidelines) | innovations, complete processing, special applications and problem solutions | tour through the tool production
ObjectivesYou will acquire a detailed overview of standard / special tools as well as their possibilities of use. You will be able to assess the feasibility of forming processes. Detailed information on our tool applica-tions will be conveyed to you.
Duration2 days
Punching into the 3rd dimension – Flexible Forming on the Punching Machine
Consulting | Seminars Consulting | Seminars
Co
nsu
ltin
g /
Sem
inar
s
Co
nsu
ltin
g /
Sem
inar
s
78 79
Consulting / Seminars Duration
Application
Application Consulting / Production assistance According to demand
Creative Part Design
Seminar sheet metal design 3 days
Seminar laser welding design 2 days
Seminar tube design 1 day
Workshop part design 1,5 - 3 days
SYNCHRO
Information Day 1 day
Business Games 1 day
Workshop 3 - 5 days
SYNCHRO in the office
Information Day 1 day
Materials
Dimension, shape, position and surface tolerances for sheetmetal parts 2 days
Material sciences - selection, processing and standardization of sheet metal materials 2 days
Tools
Punching into the 3rd dimension - flexible forming on the punching machine 2 days
Consulting | Seminars
NEW
NEW
NEW For the latest schedules and course availability
please check our website at
www.mytrumpf.com/training/en
Co
nsu
ltin
g /
Sem
inar
s
Co
nsu
ltin
g /
Sem
inar
s
CustomerTraining
TruServices
Course Catalog
Iden
t N
o. 1
5985
60-1
0-08
-10-
F –
Subj
ect
to c
hang
e
TRUMPF Werkzeugmaschinen GmbH + Co. KG | Training Center DitzingenSchuckertstrasse 16 · 71254 Ditzingen · GermanyPhone +49(0)7156 303-30500· Fax +49(0)7156 303-930710E-Mail training@de.trumpf.com · Homepage www.mytrumpf.com/training/en
Machine Tools / Power Tools
Laser Technology / Electronics
Medical Technology
TRUMPF is certified according to ISO 9001:2008
(for further information see www.trumpf.com/en/quality)
top related