ugnaini model: g180 x 180 pa built-in enclosure …

CLEARANCES: Install the oven with a minimum 1 inch clearance on sides and back to combustible construction. Consult the manual for enclosure instructions.

VENTING: The oven can be vented in two methods:

1. Direct vent using 8 inch chimney pipe listed to UL 103 HT and installed per UL 737.

2. Indirect vent using a Type 1 hood system installed per UL 2162.

SHELF: Stainless steel shelf bolts to oven. Shelf to be covered with non-combustible material provided by installer.

UTILITIES: Provide 3/4 “ N.P.T. gas supply. 116,000 BTU natural or propane. 120VAC / 1.1 AMP electrical supply.

BURNER SYSTEM: Avanzini Drago Burner. Automatic or manual.

WEIGHT: 5800 lb.

NOTE: The oven should be installed in accordance with all relevant local and national codes and in a manner acceptable to the authority having jurisdiction.

Progressive changes in technology and product development may necessitate changes to specifications without notice.

© COPYRIGHT 2011, Mugnaini Imports, Inc.May not be used without permission of copyright holder.

Mugnaini SeriesMODEL: G180 X 180 PA BUILT-IN ENCLOSURE

COMMERCIAL GAS FIRED OVEN

UL 2162 and UL 737 ANSI/NSF-4ANSI-Z83.11CAN/CGA-1.8

Mugnaini Imports, Inc.11 Hangar Way, Watsonville CA 95076888.887.7206 | 831.761.1767 | Fax: 831.728.5570www.mugnaini.com | mugnaini@mugnaini.com

MUGNAINI®I T A L Y ’ S O R I G I N A L P I Z Z A O V E N

MUGNAINI®

84 78 "

813 4

"

32" ARCH OUTSIDE

TOP VIEW

SHELF

52"

6"

39"

78"

39"

41 2

"

103 4

"

2O GAUGE GALVANIZEDSTEEL SURROUND

FRONT VIEW

FRONT PANEL1/2" CEMENT BOARD

GAS BURNERCONTROL

PANEL

FRESH AIRREQUIRED

�

�

�

�

GASBURNER

SIDE VIEW

55"

APPROX. 1038 "

STEEL PAN WITH 6"

THERMAL SLAB

STEEL FEET4" x 4" x 1/4"

STEEL FRAME2" x 2" TUBULAR