um_plb_es010006101um04_b
Post on 05-Apr-2018
227 Views
Preview:
TRANSCRIPT
-
8/2/2019 UM_PLB_ES010006101UM04_B
1/64
ATMAS Division UNCLASSIFIED ES010006101UM4E184
Issue B
Date: 27/03/2003
ROMANIA PROJECT
PLAYBACK
SOFTWARE USER MANUAL
CDRL No. :
ISSUED BY :
Alenia Marconi Systems S.p.A.Via Tiburtina Km 12.400 - Roma
ITALY
The copyright in this document is the property ofAlenia
Marconi Systems S.p.A.The document is supplied on theexpress understanding that it is to be treated as confidential
and that it may not be copied, used or disclosed to others in
whole or in part for any purpose except as authorized inwriting byAlenia Marconi Systems S.p.A.
This document contains a total of 64 pages
UNCLASSIFIED Page 1
TEMP-UK (ATC-Km 12.400) rev 6
-
8/2/2019 UM_PLB_ES010006101UM04_B
2/64
ATMAS Division UNCLASSIFIED ES010006101UM4E184
Issue B
Date: 27/03/2003
DOCUMENT SECURITY CLASSIFICATION:
This document is intended for the use of the recipient only, and for communication to such persons as may be
required to be acquainted with its contents in the course of their duties.
The recipient, and any other person to whom the recipient has communicated the contents of this document,
shall treat this document in accordance with the requirements of Alenia document Security Instructions, 15
February 1992.
Any person others the authorised holder upon obtaining possession of this document, by finding or otherwise,
should forward it by registered post, together with his name and address, in a sealed envelope to:
Ufficio Sicurezza
Alenia Marconi systems S.p.A.
Via Tiburtina 12.400
00131 Roma
ITALY
Any questions arising from this document should be addressed to:
Simonetta Di Domenico
Alenia Marconi Systems S.p.A.
Air Traffic Management & Airport Systems DivisionVia Tiburtina, Km 12.400 - 00131 Roma
ITALY
Telephone +39-06 4150-2612
Fax +39-06 4131133 / 4131436 / 4131091
UNCLASSIFIED Page 2
-
8/2/2019 UM_PLB_ES010006101UM04_B
3/64
ATMAS Division UNCLASSIFIED ES010006101UM4E184
Issue B
Date: 27/03/2003
Issue Authority
Prepared by : ......................................................
(Simonetta Di Domenico)
Date:
Approved by:
(Project Leader)......................................................
(Antonio Mattogno)
Date:
Checked by:
(QA Responsible)
......................................................
(Sergio Pignotti)Date:
Authorised by:
(Project Manager)
......................................................
(Sergio Arceri)Date:
UNCLASSIFIED Page 3
-
8/2/2019 UM_PLB_ES010006101UM04_B
4/64
ATMAS Division UNCLASSIFIED ES010006101UM4E184
Issue B
Date: 27/03/2003
REVISIONS RECORD SHEET
This sheet is a record of revisions to this document.
Issue/AL Date Revised Pages Document Change Note
(DCN)
A 22/11/01 MRT_RPB_TCA UM
B 27/03/03 First Issue
UNCLASSIFIED Page 4
-
8/2/2019 UM_PLB_ES010006101UM04_B
5/64
ATMAS Division UNCLASSIFIED ES010006101UM4E184
Issue B
Date: 27/03/2003
LIST OF ABBREVIATIONS
ABBR. DESCRIPTION
ACC Area Control Centre
ACD Advanced Common Database
ACK Acknowledge
ACL Arrival CLearance
ACR Arrival Clearance with Re-routing
AFTN Aeronautical Fixed Traffic Network
AIS Aeronautical Information Service
ALV Authorization LeVel
APP APProach control
ARR ARRival
ASF Assistant function
ASQ Arrival SeQuencing
ASS Assistant Controller
ATA Actual Time of Arrival
ATC Air Traffic Control
ATD Actual Time of Departure
ATI Actual Time of Inbound
ATM Air Traffic Management
ATO Actual Time Over
ATS Air Traffic Service
ATW Auxiliary Working Position
BRW BroWse
CNL CaNceL
CoMap Coordination Maps display
CSCI Computer Software Configuration Item
CWP Controller Working Position
DAIW Danger Area Infringement Warning
DARD Direct Access Radar Data
UNCLASSIFIED Page 5
-
8/2/2019 UM_PLB_ES010006101UM04_B
6/64
ATMAS Division UNCLASSIFIED ES010006101UM4E184
Issue B
Date: 27/03/2003
DCL Departure CLearance
DCR Departure Clearance with Re-routing
DEP DEParture list
DIS DISabled
DLA DeLAy departure
DMD Dangerous area Map Display
EMG EmerGency
EST ESTimate
ETA Estimated Time of Arrival / Estimated Exit Time from the feeding fix (in
ACL order)
ETD Estimated Time of Departure
ETI Estimated Time of Inbound
ETL Estimated Time of Landing
ETO Estimated Time Over
EXE EXEcutive function
FCK Formality ChecK
FCN Flight data CaNcellation
FDM Flight Data Management
FDP Flight Data Processing
FIR Flight Information Region
FL Flight Level
FLD FLDA Displaying
FLDA FLight DAta page list
FLDI FLight DIrectory listFPLM Flight Plan Message list
FTR File TeRmination
GlobMap Global Mps display
I/O Input/Output
ICAO International Civil Aviation Organization
INBFIX INBound (entry) FIX
INI INItialize
UNCLASSIFIED Page 6
-
8/2/2019 UM_PLB_ES010006101UM04_B
7/64
ATMAS Division UNCLASSIFIED ES010006101UM4E184
Issue B
Date: 27/03/2003
LND LANding report
LRW Landing RunWay
LSV LaSt leVel
LVA planned/cleared LeVel Assignment
MET METeorological
MIL MILitary
MNG MaNaGement
MPG Map Generation System
MRT Multi Radar Tracking
MSAW Minimum Safe Altitude Warning
NAVAID NAVigational AID
NM Nautical Miles
NOTAM NOtice to AirMan
NVS NaVigator aid
OBT Off Block Time
ODS Operator input and Display System
ONL ON Line
OP Operational
OPRSUP OpeRational SUPervisor
PCN Planning Cancellation
PEN PENding tracks
PKB ParKing Bay allocation
PLB PlayBack
PLC Planning Controller
PLN PlaNning function
QNH Barometric pressure / enter QNH
RCL en-Route CLearance
RCR en-Route Clearance with Re-routing
RDP Radar Data Processing
UNCLASSIFIED Page 7
-
8/2/2019 UM_PLB_ES010006101UM04_B
8/64
ATMAS Division UNCLASSIFIED ES010006101UM4E184
Issue B
Date: 27/03/2003
REC RECording
REG REGistration number
REP Position REport
REV estimate REVision
RHP Radar Head Processor
RNG RaNGe scale
RWY RunWaY
SBY Stand-BY
SID Standard Instrumental Departure
SIG fir SIGmet
SMD System Messages Dispatching (CSCI)
SRL SSR code ReLease
SSR Secondary Surveillance Radar / SSR code assignment
STAR STandard Approaching Route
SUM Software User Manual
SUP SuPerVisor
SW SoftWare
TAS True Air Speed / change True Air Speed
TBD To Be Defined
TCA Traffic Conflict Alert
TKF TaKe-oFf report
TMA TerMinal Area
TMS Terminal Area management
TRW departure RunWay
TXT free TeXT
TWR control ToWeR
VDU Video Display Unit
VFR Visual Flight Rule
WTC WaTCher
UNCLASSIFIED Page 8
-
8/2/2019 UM_PLB_ES010006101UM04_B
9/64
ATMAS Division UNCLASSIFIED ES010006101UM4E184
Issue B
Date: 27/03/2003
TABLE OF CONTENTS
1. SCOPE .......................................................................................................................................................11
1.1 IDENTIFICATION...................................................................................................................................................11
1.2 SYSTEM OVERVIEW............................................................................................................................................12
1.3 DOCUMENT OVERVIEW......................................................................................................................................13
2. REFERENCED DOCUMENTS ..............................................................................................................14
3. THE INTERFACES DESCRIPTION ....................................................................................................15
3.1 INTERFACESTOWARDSTHESYSTEMCOMPONENTS...................................................................................................15
3.2 INTERFACETOWARDSTHESYSTEMOPERATOR.........................................................................................................17
4. PLB ORDERS ...........................................................................................................................................18
4.1 PLB ORDERSYNTAX..........................................................................................................................................19
4.2 PLB ORDERLIST...............................................................................................................................................204.3 ORDERANALYSISAND EXECUTION.......................................................................................................................22
4.4 ORDERTOCONFIGUREANDINITIALIZE PLB..........................................................................................................25
4.4.1 ASSIGNEMENTOFASERIALPRINTER(ASS) ORDER................................................................................................26
4.4.2 ASSIGNEMENTOFAVOICERECORDER(ASS) ORDER..............................................................................................27
4.4.3 DEASSIGNEMENTOFAVOICERECORDER(DEA) ORDER..........................................................................................28
4.4.4 DEASSIGNEMENTOFASERIALPRINTER (DEA) ORDER............................................................................................29
4.4.5 ENABLETHESERIALPRINTERREPRODUCTION (ENA) ORDER...................................................................................30
4.4.6 ENABLETHE PLH REPRODUCTION (ENA) ORDER.................................................................................................31
4.4.7 ASSIGNEMENTOFFILE (ASF) ORDER...................................................................................................................32
4.4.8 DEASSIGNEMENTOFFILE (DAF) ORDER...............................................................................................................33
4.4.9 MOUNTINGFILE ( MOF) ORDER.........................................................................................................................34
4.4.10 DISMOUNTOFFILE (DMF) ORDER.....................................................................................................................35
4.4.11 SETALOGGERIDOFAVOICERECORDER(SET) ORDER........................................................................................36
4.4.12 SETACHANNELIDOFAVOICERECORDER(SET) ORDER......................................................................................37
4.4.13 SETANACCOUNTOFAVOICERECORDER(SET) ORDER........................................................................................38
4.4.14 SETTHEMESSAGELENGTHOFAVOICERECORDER(SET) ORDER...........................................................................39
4.5 ORDERTOSTART/STOP PLAY-BACKSESSION...........................................................................................................40
4.5.1 STOP PLB SESSION (PAU) ORDER......................................................................................................................41
4.5.2 STARTOF PLB SESSION (RUN) ORDER...............................................................................................................42
4.5.3 POSITIONINGONFILE (POS) ORDER.....................................................................................................................43
UNCLASSIFIED Page 9
-
8/2/2019 UM_PLB_ES010006101UM04_B
10/64
ATMAS Division UNCLASSIFIED ES010006101UM4E184
Issue B
Date: 27/03/2003
4.5.4 REVIEWONFILE (REV) ORDER...........................................................................................................................44
4.6 ORDERTODISPLAY PLB INFORMATION................................................................................................................45
4.6.1 DISPLAYOFTHESTATUSOFALLCONFIGURATED LAN UNIT (SHO) ORDER............................................................454.6.2 DISPLAYOFTHE CSCI XPL STATUS (SHO) ORDER............................................................................................46
4.6.3 DISPLAYOFVOICERECORDERSTATUS (SHO) ORDER.............................................................................................48
4.6.4 DISPLAYOFDIAGNOSTICSTATUS (SHO) ORDER....................................................................................................49
4.6.5 DISPLAYOFFILESTATUS (SHO) ORDER...............................................................................................................50
4.6.6 DISPLAYTHECONTENTSOFSPECIFIEDFILE ...........................................................................................................51
4.7 ORDERS SEQUENCE..............................................................................................................................................52
4.7.1 EXAMPLEOF PLB SESSION .................................................................................................................................52
5. PLB MESSAGES .....................................................................................................................................54
5.1 NOTIFICATIONS ...................................................................................................................................................55
5.2 DIAGNOSTICS.......................................................................................................................................................60
5.3 PLB STOPEVENTS ..............................................................................................................................................63
6. DEGRADED EXECUTION ....................................................................................................................64
UNCLASSIFIED Page 10
-
8/2/2019 UM_PLB_ES010006101UM04_B
11/64
ATMAS Division UNCLASSIFIED ES010006101UM4E184
Issue B
Date: 27/03/2003
1. SCOPE
1.1 IDENTIFICATION
This is the Software User Manual of CSCI XPL
Identification Number : E000XPL-01SUM
Title: Advanced Playback
Abbreviation: PLB
UNCLASSIFIED Page 11
-
8/2/2019 UM_PLB_ES010006101UM04_B
12/64
ATMAS Division UNCLASSIFIED ES010006101UM4E184
Issue B
Date: 27/03/2003
1.2 SYSTEM OVERVIEW
The CSCI Playback (XPL) is a part of SATCAS (ALENIA Air Traffic Control Automatic
System).
The purpose of PLB is to review the data from file on disk that previously is restored from tape
by CSCI BCK or stored by XRE on disk, and all the information stored on file are send to
LAN.
Two different kinds of Playback can be performed:
Fast view Direct from the H/D without restore the file from tapePlayback by means loading from tape and restore on mirrored disk
The users are the following:
- WSs (Workstation) which receive all the messages addressed to them.
The data to be reproducted are:
System tracks, coming from MRT processing
Local tracks (mono-radar/DARD tracks)
Weather data
Orders from controllers
Orders of supervision coming from certain (central processors, workstation, Monitoring
system)
Diagnostic messages coming from displays, central processor,RHPs
Control messages (time,date,etc.)
Auxialiary data
Flight data
In summary, the playback function is able to reproduct all the messages which are stored on file
and send them through out the LANs.
All radar and flight plan data relevant to a workstation are played-back together with all action
performed by the controllers, in order at the time of the recording.
The playback can be performed in fast (double speed)/normal/slow (half speed and one quarter)
modes.
UNCLASSIFIED Page 12
-
8/2/2019 UM_PLB_ES010006101UM04_B
13/64
ATMAS Division UNCLASSIFIED ES010006101UM4E184
Issue B
Date: 27/03/2003
1.3 DOCUMENT OVERVIEW
This document describes the procedures to be followed for the execution of the CSCI XPL.
The paragraph 1 supplies a brief description of the BFS system and of the content of this document.
The paragraph 2 supplies a list of referenced documents.
The paragraph 3 supplies a glossary.
The paragraph 4 contains the description of PLB interfaces with external world.
The paragraph 5 provides informations about :
PLayBack CSCI brief functional despription.
Operator commands description.
The chapter 6 provides the list of messages and errors notifications issued from CSCI XPL.
UNCLASSIFIED Page 13
-
8/2/2019 UM_PLB_ES010006101UM04_B
14/64
ATMAS Division UNCLASSIFIED ES010006101UM4E184
Issue B
Date: 27/03/2003
2. REFERENCED DOCUMENTS
Software Requirement Specification E000XPL0-D01SRS.
DoD_2167A_DI-MCCR-80019A.
UNCLASSIFIED Page 14
-
8/2/2019 UM_PLB_ES010006101UM04_B
15/64
ATMAS Division UNCLASSIFIED ES010006101UM4E184
Issue B
Date: 27/03/2003
3. THE INTERFACES DESCRIPTION
3.1 INTERFACES TOWARDS THE SYSTEM COMPONENTS
The interfaces between PLayBack and the external world are :
Identificator : NSV_Message
Description : They are all the messages exchanged with CSCI NSV and the informations about
the operations on the peripherals.
Informations type : To Degrade-To Restore the peripherals performance
Characteristic of exchange : Via Path
Referenced Documents : Interface Requirements Specification PLB
Identificator : NSV_Change_State
Description : It is the message that contains the PLB activation according to node role.
Informations type : PLB activation (Master/Stand_by) To Degrade-To Restore the
peripherals Performance
Characteristic of exchange : Via Path
Referenced Documents : Interface Requirements Specification PLB
Identificator : SMD_Command_To_PLB,PLB_Message_To_SMD, Run_Pause_Order
Description : All the messages exchanged with CSCI SMD (System Messages Dispatcher).
Informations type : These are that informations that to correspond to the orders sent from the
operator and the diagnostic messages
Characteristic of exchange : Via Path
UNCLASSIFIED Page 15
-
8/2/2019 UM_PLB_ES010006101UM04_B
16/64
ATMAS Division UNCLASSIFIED ES010006101UM4E184
Issue B
Date: 27/03/2003
Referenced Documents : Interface Requirements Specification PLB
Identificator : REC_PLB_Message
Description : These are the requests and the answers sent from PLB to REC (and viceversa)
for the peripherals handling
Informations type : These are the informations regarding to the peripherals used
Characteristic of exchange : Via Lan
Referenced Documents : Interface Requirements Specification PLB
Identificator : Print_Message
Description : These are the messages previously recorded trasmitted to the printer
Informations type : These are the messages sent to the printer
Characteristic of exchange : Via Path
Referenced Documents : Interface Requirements Specification PLB
Identificator : PLH_Data
Description : This flow is represented by the messages containing the radar data, acquired
through the CSCI XRE and recorded on the unit, that are reproduced towards the
PLH function.
Informations type : These are the informations regarding to the radar messages
Characteristic of exchange: Via Path
Referenced Documents: Interface Requirements Specification PLB
UNCLASSIFIED Page 16
-
8/2/2019 UM_PLB_ES010006101UM04_B
17/64
ATMAS Division UNCLASSIFIED ES010006101UM4E184
Issue B
Date: 27/03/2003
3.2 INTERFACE TOWARDS THE SYSTEM OPERATOR
The system operator interfaces the CSCI XPL by operator orders.He can address these orders to the CSCI XPL and see the answers or the diagnostics in two
ways:by any node consoleand/or
by a dedicated CMS (Control and Monitoring Subsystem) where the operator can also check thelogical status of CSCI XPL
In both cases, the messages dispatching is executed by SMD.
UNCLASSIFIED Page 17
-
8/2/2019 UM_PLB_ES010006101UM04_B
18/64
ATMAS Division UNCLASSIFIED ES010006101UM4E184
Issue B
Date: 27/03/2003
4. PLB ORDERS
This Chapter describes all orders accepted by CSCI XPL grouped in the following classes:
Configuration and initialization orders:these orders prepare PLB to start a playback sessionOrders to start/ stop playback sessionsInformation presentation orders:these orders show information about the palyback status .
UNCLASSIFIED Page 18
-
8/2/2019 UM_PLB_ES010006101UM04_B
19/64
ATMAS Division UNCLASSIFIED ES010006101UM4E184
Issue B
Date: 27/03/2003
4.1 PLB ORDER SYNTAX
Every order addressed to the CSCI XPL must fit the following syntax:
= [ blank ] blank [ ]
where:
= the node triliteral where the order must be sent. It can be omitted if theorder is typed on the local node console but it must be present if theorder is typed on another node console or by CMS
= the triliteral PLB
= one of the triliterals of the order list managed by PLB (see next paragraph)
1 = blank { blank }
03
= { | }2
UNCLASSIFIED Page 19
-
8/2/2019 UM_PLB_ES010006101UM04_B
20/64
ATMAS Division UNCLASSIFIED ES010006101UM4E184
Issue B
Date: 27/03/2003
4.2 PLB ORDER LIST
The list of all the orders accepted by CSCI XPL is the following:
PLB ASS SP Assign of the Serial Printer
PLB ASS VRn [DKm] Assign phisycal-logical Voice Recorder (optional)
PLB DEA VRn [DKm] Deassign Voice Recorder (optional)
PLB DEA SP Deassign of the Serial Printer
PLB ENA REA Selection of the messages sent to the LAN.
PLB ENA PLH Selection of the messages sent to the PLH function.
PLB ASF {FLA FLB} n Assign phisycal-logical File Unit
PLB DAF {FLA FLB} n Deassign File Unit
PLB MOF {FLA FLB} Mount FLA or FLB
PLB DMF {FLAFLB} Dismount FLA or FLB
PLB POS [mm/gg/aa hh:mm] Search forward and backward fast
PLB PAU Pause Play-back
PLB RUN Run Play-back
PLB REV mm Review last mm minutes of reproduction
PLB SHO DIA Display diagnostic level
PLB SHO LAN Display LAN status
PLB SHO PLB Display Playback status
PLB SHO VR Shows the Voice Recorders assigment status
PLB SHO FL It displayes the files status
PLB MON FLn It display the contents of specified file.
UNCLASSIFIED Page 20
-
8/2/2019 UM_PLB_ES010006101UM04_B
21/64
ATMAS Division UNCLASSIFIED ES010006101UM4E184
Issue B
Date: 27/03/2003
PLB SET LOG xxxxxxx Sets logger identifier (only for VR Nice and WordNet).
PLB SET CHN xxx Sets channel identifier (only for VR Nice and WordNet).
PLB SET LIN user_name password Sets a new account (only for VR WordNet).
PLB SET MSG length Configures the message length for VR WordNet.
UNCLASSIFIED Page 21
-
8/2/2019 UM_PLB_ES010006101UM04_B
22/64
ATMAS Division UNCLASSIFIED ES010006101UM4E184
Issue B
Date: 27/03/2003
4.3 ORDER ANALYSIS AND EXECUTION
The CSCI XPL analyses any received order in several consecutive phases:
Acceptability analisys: in this phase PLB checks if it can accept any order (right or wrong)
If PLB cant accept any command, the following notifications are sent to SMD and displayedon the sender I/O console (and/or on notification window of CMS):
: PLB IS IN XXXXX STATE
where XXXXX is the actual PLB status incompatible with order execution
or
: THE NODE IS COMMUTINGif the order is sent during a change node status phase
otherwise PLB continues the analisys
Syntax analisys: in this phase PLB checks if the order parameters are correct in number andvalue
If the syntax is wrong, the following notification is sent to SMD and displayed on the sender
I/O console (and/or on notification window of CMS):
: SYNTAX ERROR
otherwise PLB continues the analisys
UNCLASSIFIED Page 22
-
8/2/2019 UM_PLB_ES010006101UM04_B
23/64
ATMAS Division UNCLASSIFIED ES010006101UM4E184
Issue B
Date: 27/03/2003
Preliminary semantic analisys: in this phase PLB checks if it can suddenly reply the answer
(either with positive or negative issue)
If it can, a notification is sent to SMD and displayed on the sender I/O console (see the chapter6 for notifications in case of negative issue)
otherwise the following notification is sent to SMD and displayed on the sender I/O console(and/or on notification window of CMS):
: ORDER ACCEPTEDor
: ORDER IN EXECUTION
and PLB continues the analisys
Semantic analisys: in this phase PLB checks if the order is compatible with file status orperipheral status (Voice Recoreder, Serial Printer ).
If not, two different notifications are sent to SMD and displayed on the sender I/O console(and/or on notification window of CMS):
: COMMAND NOT IN SEQUENCE
if the operator omits some preliminary order (for example if he tries to mount a file notpreviously assigned)
The chapter 6 will contain the complete list of cases where these notifications are shown.
UNCLASSIFIED Page 23
-
8/2/2019 UM_PLB_ES010006101UM04_B
24/64
ATMAS Division UNCLASSIFIED ES010006101UM4E184
Issue B
Date: 27/03/2003
Order execution: this phase follows the preliminary semantic analisys (if the answer to the
order can be suddenly replied) or the semantic analisys in case of orderscompatibles with the PLB and peripheral status.
At the end of execution, there are two types of notifications sent to SMD and displayed on thesender I/O console (and/or on notification window of CMS).
The first one is referred to information presentation orders (see the netx paragraphs):
: (it is to be noted that the generic answer in case of negative issue at the end of each
analisys phase has this form, where the order answer is an appropriate diagnostic
see the chapter 6)
while the second one is referred to all others orders:
: FMS ERROR (case of device off)or : ERROR IN EXECUTION (case of errors occurred during the
execution)In this last case the answer is followed by a diagnostic message that explains the error occurred.
UNCLASSIFIED Page 24
-
8/2/2019 UM_PLB_ES010006101UM04_B
25/64
ATMAS Division UNCLASSIFIED ES010006101UM4E184
Issue B
Date: 27/03/2003
4.4 ORDER TO CONFIGURE AND INITIALIZE PLB
The CSCI XPL can manage up to five files in two different way:
the first one mode is olny with file main
the second one mode (is optional) with file main and file reserve, in this case the file reserve
must be the continuation file of file main .
Each file unit is identified by a physical number (1,2,3,4,5), the role of file is identified by a
logical name that can be FLA for main file and FLB for file reserve.
At the start no files are assigned to PLB, to begin a playback session are needed some
operations.
The first operation is the assignment of file main (PLB ASF FLX), the second is mounting of
files (PLB MOF FLX).
Naturally, there are also the commands to dismount and to deassign files (PLB DAF/DMF
FLX).
Besides it is possible to require some selections regarding to printer, for instance, or
reproduction modality (PLB ENA REA/PLH )
UNCLASSIFIED Page 25
-
8/2/2019 UM_PLB_ES010006101UM04_B
26/64
ATMAS Division UNCLASSIFIED ES010006101UM4E184
Issue B
Date: 27/03/2003
4.4.1 ASSIGNEMENT OF A SERIAL PRINTER (ASS) ORDER
Syntax: PLB ASS SP
Purpose: Assign to PLB the serial printer.
After this command is posiible the output on serial printer .
Remark: If the printer is already assigned to PLB,
"DEVICE ALREADY ASSIGNED" is displayed;
The assignment of a serial printer already assigned is rejected.
Result: The printer is assigned and the "DEVICE ASSIGNED" is displayed.
UNCLASSIFIED Page 26
-
8/2/2019 UM_PLB_ES010006101UM04_B
27/64
ATMAS Division UNCLASSIFIED ES010006101UM4E184
Issue B
Date: 27/03/2003
4.4.2 ASSIGNEMENT OF A VOICE RECORDER (ASS) ORDER
Syntax: PLB ASS VRn [Dkm]
where n = 1 .. 3 is the voice recorder unit
m = 1 , 2 is the VR decks
Purpose : Assign to the PLB the Voice Recorder n
with all the Decks that itcontains, if "DKm" isn't.
If "DKm" is present instead, it assign to the PLB the Deck m only;
Remarks : The assignment of a voice recorder already assigned is rejected.If the Voice Recorder doesn't support the Deck m then the command isrejected.
If it tries to assign more than 2 Deck then the command is rejected.
UNCLASSIFIED Page 27
-
8/2/2019 UM_PLB_ES010006101UM04_B
28/64
ATMAS Division UNCLASSIFIED ES010006101UM4E184
Issue B
Date: 27/03/2003
4.4.3 DEASSIGNEMENT OF A VOICE RECORDER (DEA) ORDER
Syntax: PLB DEA VRn [Dkm]
where n = 1 .. 3 is the voice recorder unit
m = 1 , 2 is the VR decks;
Purpose : Deassign to the PLB the Voice Recorder n with all the Decks
that it contains.
If "DKm" is present instead, it deassign to the PLB the Deck m only;
Remarks : The deassignment of a voice recorder already deassigned is rejected.If the Voice Recorder desn't support the Deck m then the command is rejected.If it tries to deassign more than 2 Deck then the command is rejected.
UNCLASSIFIED Page 28
-
8/2/2019 UM_PLB_ES010006101UM04_B
29/64
ATMAS Division UNCLASSIFIED ES010006101UM4E184
Issue B
Date: 27/03/2003
4.4.4 DEASSIGNEMENT OF A SERIAL PRINTER (DEA) ORDER
Syntax: PLB DEA SP
Purpose: Deassigns to PLB the serial printer.
The printings are not issued any more.
Remark: If the printer is already deassigned to PLB, "DEVICE ALREADY ASSIGNED"
is displayed;
The deassignment of a serial printer already deassigned is rejected.
UNCLASSIFIED Page 29
-
8/2/2019 UM_PLB_ES010006101UM04_B
30/64
ATMAS Division UNCLASSIFIED ES010006101UM4E184
Issue B
Date: 27/03/2003
4.4.5 ENABLE THE SERIAL PRINTER REPRODUCTION (ENA) ORDER
Syntax: PLB ENA REA
Purpose: It selectes the reproduced messages to send to the LAN.
Remark: If the PLB is in RUN status the command is rejected.
UNCLASSIFIED Page 30
-
8/2/2019 UM_PLB_ES010006101UM04_B
31/64
ATMAS Division UNCLASSIFIED ES010006101UM4E184
Issue B
Date: 27/03/2003
4.4.6 ENABLE THE PLH REPRODUCTION (ENA) ORDER
Syntax: PLB ENA PLH
Purpose: It selectes the reproduced messages to send about the PLH function
Remarks: If PLH function isn't configurated on mode then the command is rejected. If the PLAYBACK is in RUN then the command is rejected.
UNCLASSIFIED Page 31
-
8/2/2019 UM_PLB_ES010006101UM04_B
32/64
ATMAS Division UNCLASSIFIED ES010006101UM4E184
Issue B
Date: 27/03/2003
4.4.7 ASSIGNEMENT OF FILE (ASF) ORDER
Syntax: PLB ASF {FLA FLB} n
where n = 1,2,3,4,5 is the file unit physical number
Purpose: This command assigns the main logical unit and reserve logical unit (FLA, FLB)
to the file unit which physical number is "n". This unit is dedicated to PLB.
Remarks: If the file unit "n" is already assigned to REC or to PLB the command isrejected.
If another file unit with physical number not equal to "n" is already assigned toPLB the command is rejected.
If there is a disk error then the command is rejected.If the file is in backup then the command is rejected.
UNCLASSIFIED Page 32
-
8/2/2019 UM_PLB_ES010006101UM04_B
33/64
ATMAS Division UNCLASSIFIED ES010006101UM4E184
Issue B
Date: 27/03/2003
4.4.8 DEASSIGNEMENT OF FILE (DAF) ORDER
Syntax: PLB DAF {FLA FLB}
Purpose: This command deassigns(releases) the "Phisycal Unit"
with logical name FLA (main file) or with logical name FLB (reserve file).
Remarks: If no file unit is assigned to PLB the command is rejected.If there is a disk error then the command is rejected.
UNCLASSIFIED Page 33
-
8/2/2019 UM_PLB_ES010006101UM04_B
34/64
ATMAS Division UNCLASSIFIED ES010006101UM4E184
Issue B
Date: 27/03/2003
4.4.9 MOUNTING FILE ( MOF) ORDER
Syntax : PLB MOF {FLA FLB}
Purpose : This command allows the mounting of the main file or file reserve
and defines the disk as playback device.
Remarks : In case of file main (FLA) the command is refused when:
the file was still not assigned with the PLB ASF command .
the file was already mounted.
the file is empty .
the disk is not avalaible.
theres an FMS ERROR.
In case of file reserve (FLB) the command is refused when:
the file was still not assigned with the PLB ASF command .
the file was already mounted.
the file main was not mounted.
the file reserve is not continuation file.
the file is empty.
the disk is not avalaible .
theres an FMS ERROR.
UNCLASSIFIED Page 34
-
8/2/2019 UM_PLB_ES010006101UM04_B
35/64
ATMAS Division UNCLASSIFIED ES010006101UM4E184
Issue B
Date: 27/03/2003
4.4.10 DISMOUNT OF FILE (DMF) ORDER
Syntax : PLB DMF {FLA FLB}
Purpose: This command allows the dismounting of the main file and file reserve.
Remarks. : The file was still not assigned and mounted .
The file was already dismounted.
The disk is not avalaible .
Theres an FMS ERROR.
If the PLB status is running.
UNCLASSIFIED Page 35
-
8/2/2019 UM_PLB_ES010006101UM04_B
36/64
ATMAS Division UNCLASSIFIED ES010006101UM4E184
Issue B
Date: 27/03/2003
4.4.11 SET A LOGGER ID OF A VOICE RECORDER (SET) ORDER
Syntax: PLB SET LOG xxxxxxx
where xxxxxxx = 0000001 .. 9999999 is the value numerical of logger identifier.
Purpose: Set logger identifier to the PLB of a Voice Recorder.
Remarks: The command is rejected if a Voice Recorder is already assigned.
UNCLASSIFIED Page 36
-
8/2/2019 UM_PLB_ES010006101UM04_B
37/64
ATMAS Division UNCLASSIFIED ES010006101UM4E184
Issue B
Date: 27/03/2003
4.4.12 SET A CHANNEL ID OF A VOICE RECORDER (SET) ORDER
Syntax: PLB SET CHN xxx
where xxx = 001 .. 128 is the value numerical of channel logical identifier.
Purpose: Set the channel previously recorded on Voice Recorder has to be played.
Remarks: The command is rejected if a Voice Recorder is already assigned.
UNCLASSIFIED Page 37
-
8/2/2019 UM_PLB_ES010006101UM04_B
38/64
ATMAS Division UNCLASSIFIED ES010006101UM4E184
Issue B
Date: 27/03/2003
4.4.13 SET AN ACCOUNT OF A VOICE RECORDER (SET) ORDER
Syntax: PLB SET LIN user_name[password
Where user_name = is the string that contains the user.
password = is the string that contains the password.
Purpose: Set account to the PLB for Voice Recorder identification.
Remarks: The command is rejected if a Voice Recorder is already assigned. To changepassword, the user is able to use again this command.
The string can accept only digit and letter.
UNCLASSIFIED Page 38
-
8/2/2019 UM_PLB_ES010006101UM04_B
39/64
ATMAS Division UNCLASSIFIED ES010006101UM4E184
Issue B
Date: 27/03/2003
4.4.14 SET THE MESSAGE LENGTH OF A VOICE RECORDER (SET) ORDER
Syntax: PLB SET MSG length
where length = 10 .. 30 identify the number of minutes for message length.
Purpose: Set the time of messages length to configure the Voice Recorder.
Remarks: The command is rejected if a Voice Recorder is already assigned.
UNCLASSIFIED Page 39
-
8/2/2019 UM_PLB_ES010006101UM04_B
40/64
ATMAS Division UNCLASSIFIED ES010006101UM4E184
Issue B
Date: 27/03/2003
4.5 ORDER TO START/STOP PLAY-BACK SESSION
A PLB session to start needs that one file is assigned and mounted, at least.The order to start is
PLB RUN command on I/O Console.
To stop a PLB session tje oder is PLB PAU command
A PLB session terminate also automatically when the file are ended. ,in case only file main is
present.
Otherwise, when also the file reserve is present, the session terminates after the end of file
reserve.
UNCLASSIFIED Page 40
-
8/2/2019 UM_PLB_ES010006101UM04_B
41/64
ATMAS Division UNCLASSIFIED ES010006101UM4E184
Issue B
Date: 27/03/2003
4.5.1 STOP PLB SESSION (PAU) ORDER
Syntax : PLB PAU
Purpose: Stops the operative PLB. The voice registration and the digital registration are stopped.
Remarks:. If PLB is already in pause then the command is rejected.
UNCLASSIFIED Page 41
-
8/2/2019 UM_PLB_ES010006101UM04_B
42/64
ATMAS Division UNCLASSIFIED ES010006101UM4E184
Issue B
Date: 27/03/2003
4.5.2 START OF PLB SESSION (RUN) ORDER
Syntax: PLB RUN [xxx]
where:
xxx = OEI the reproduction speed is one-eight of the real registation
speed.
xxx = OQU the reproduction speed is one-quarter of the real registration
speed.
xxx = HAL the reproduction speed is half time of the real registration
speed.
xxx = DOU the reproduction speed is double time of the real registration
speed.
Purpose: Executes the start of the operative Play-back.
Remarks: If there arent file assigned and mounted then the run commands is rjected.
If the PLB was already in run status then the command is rejected.
UNCLASSIFIED Page 42
-
8/2/2019 UM_PLB_ES010006101UM04_B
43/64
ATMAS Division UNCLASSIFIED ES010006101UM4E184
Issue B
Date: 27/03/2003
4.5.3 POSITIONING ON FILE (POS) ORDER
Syntax: PLB POS [mm/gg/aa hh:mm]
where:
mm = 1, 2 , ... , 12 is the mounth of positioning
gg = 1, 2 , ... , 31 is the day of positioning
aa = 0, 1, 2 , ... , 99 is the year of positioning
hh = 0, 1, 2 , ... , 23 are the hours of positioning
mm = 0, 1 , ..., 59. are the minutes of positioning
Purpose: Executes fast forward and backward search.
Remarks: If the play-back is in run status then the command is rejected.
If the file was not assigned (command PLB ASF) or was not mounted (command
PLB MOF) or the PLB is in RUN (command PLB RUN) the command is rejected.
If date and hour inserted in the command are not recorded on file then thecommand is rejected the command isisplayed.
UNCLASSIFIED Page 43
-
8/2/2019 UM_PLB_ES010006101UM04_B
44/64
ATMAS Division UNCLASSIFIED ES010006101UM4E184
Issue B
Date: 27/03/2003
4.5.4 REVIEW ON FILE (REV) ORDER
Syntax: PLB REV mm
where: mm = 00,01,...,99 are the minutes
Purpose: The command executes the review of the last mm minutes.
Remarks: To execute the command the play-back must be in pause status.
If the play-back is not in pause then the command is rejected.
If the time is not on file then the command is rejected.
UNCLASSIFIED Page 44
-
8/2/2019 UM_PLB_ES010006101UM04_B
45/64
ATMAS Division UNCLASSIFIED ES010006101UM4E184
Issue B
Date: 27/03/2003
4.6 ORDER TO DISPLAY PLB INFORMATION
4.6.1 DISPLAY OF THE STATUS OF ALL CONFIGURATED LAN UNIT (SHO) ORDER
Syntax: PLB SHO LAN
Purpose: Shows the LANs status.
Remarks: none
Result : When executed, the SHO order displays the following information layout
LAN STATUS : xxx yyy
where:
xxx = ON connection LAN on (default)
= OFF connection LAN off
yyy = SEL connection LAN selected
= UNS connection LAN not selected
UNCLASSIFIED Page 45
-
8/2/2019 UM_PLB_ES010006101UM04_B
46/64
ATMAS Division UNCLASSIFIED ES010006101UM4E184
Issue B
Date: 27/03/2003
4.6.2 DISPLAY OF THE CSCI XPL STATUS (SHO) ORDER
Syntax : PLB SHO PLB
Purpose : This command shows the status of CSCI Playback.
Remarks: none
Result : If the order is executed,the following table is displayed to show the internal statusof tasks and the reproduction speed, when it reproduces:
PLB STATUS : xxx repmode speed
P1STATUS : yyyy
P2STATUS : yyyy
P4STATUS : yyyy
where:
xxx = ON Play-back in reproduction= OFF Play-back not in reproduction
repmode = REA real time reproduction
= PLH plh reproduction
= SP serial printer reproduction
speed = 'x 2' double reproduction speed
= 'x 1' normal reproduction speed
= '1/2' half reproduction speed= '1/4' one-quarter reproduction speed
= '1/8' one-eight reproduction speed
yyyy = internal task status
UNCLASSIFIED Page 46
-
8/2/2019 UM_PLB_ES010006101UM04_B
47/64
ATMAS Division UNCLASSIFIED ES010006101UM4E184
Issue B
Date: 27/03/2003
for P1 is always displayed in WORK STATUS (RUNNING), since the
transitions in other status are too fast to be displayed.
forP2 this task has six status as follows :
- WITHOUT DEVICE (no device is assigned to Playback)
- WITH DEVICE (tape or file device is assigned to Playback)
- ADVAN (after a POS command operator or an internal pause)
- PAUOP ('PAUSE OPERATOR' after a PAU command operator )
- PAUIN ('PAUSE INTERNAL' when there is the pause of PMRT
and PLN or the pause of Voice Recorder)
- OPER(running)
for P4 this task has five status as follows:
- IDLE (no file is assigned to Playback)
- FILE ASSIGNED (a file is assigned to Playback)
- POS (after a POS command operator)
- WRITE (during the tape mounting)
- READ (running)
Otherwise it displayes, when does not reproduce: PLB STATUS : OFF
UNCLASSIFIED Page 47
-
8/2/2019 UM_PLB_ES010006101UM04_B
48/64
ATMAS Division UNCLASSIFIED ES010006101UM4E184
Issue B
Date: 27/03/2003
4.6.3 DISPLAY OF VOICE RECORDER STATUS (SHO) ORDER
Syntax : PLB SHO VR
Purpose: Shows the status of the Voice Recorders.
Remarks: none
Result : When executed the SHO order displays the following information layout :
PLB SHO VR :
VR1 : DECK1 xxx yyyy zzz
VR2 : DECK2 xxx yyyy zzz
VR3 : DECK2 xxx yyyy zzz
where :
xxx = REC tape assigned to the Recording function
= PLB tape assigned to the Play-back function
= ---- tape not assigned
yyyy = MAIN main tape
zzz = ON tape operating (default)
UNCLASSIFIED Page 48
-
8/2/2019 UM_PLB_ES010006101UM04_B
49/64
ATMAS Division UNCLASSIFIED ES010006101UM4E184
Issue B
Date: 27/03/2003
4.6.4 DISPLAY OF DIAGNOSTIC STATUS (SHO) ORDER
Syntax: PLB SHO DIA
Purpose: Shows the maximum level of the diagnostic messages that XPL can issue.
Remarks: none
Result : When executed the SHO order displays the following information layout :
PLB SHO DIA : DIAGNOSTIC LEVEL n
where:
n = -1 , 0 , 1 , 2 , ... , 7 is the diagnostic levels.
The meaning of these values is:
-1 = not diagnostic
0 = higher diagnostic level
...
7 = lower diagnostic level
UNCLASSIFIED Page 49
-
8/2/2019 UM_PLB_ES010006101UM04_B
50/64
ATMAS Division UNCLASSIFIED ES010006101UM4E184
Issue B
Date: 27/03/2003
4.6.5 DISPLAY OF FILE STATUS (SHO) ORDER
Syntax: PLB SHO FL
Purpose: This command shows the File Units status.
Remarks: none
Result : When executed the SHO order displays the following information layout :
PLB SHO FL :
FL1 xxx yyyy zzz
FL2 xxx yyyy zzz
....
FLn xxx yyyy zzz
where:
n = 1 .. 5 is the number of the file
xxx = REC file assigned to the Recording function
= PLB file assigned to the Playback function
= --- file not assigned
yyyy = MAIN main file (for FLA)
= RES continuation file (for FLB)
= RESR reserve file (for FLC)
= --- file not assigned
zzz = MOU mounted file
= DSM file not mounted
= --- file not assigned to XPL .
UNCLASSIFIED Page 50
-
8/2/2019 UM_PLB_ES010006101UM04_B
51/64
ATMAS Division UNCLASSIFIED ES010006101UM4E184
Issue B
Date: 27/03/2003
4.6.6 DISPLAY THE CONTENTS OF SPECIFIED FILE
Syntax: PLB MON Fln
Purpose: This command shows the informations present on the File (The identification
number of the File,the initial Date and Hour of recording,the end Date and Hour
of ording).
where: n = 1 , 2 , 3 , 4 , 5 (number of the file)
Remarks: none.
Result : When executed the SHO order displays the following information layout :
PLB MON FLn :
INIT DATE : MM/DD/YYYY/hh:mm:ss
END DATE : MM/DD/YYYY/hh:mm:ss
where:
FLn = { FL1 , FL2 , FL3 , FL4 , FL5 }
MM is the month of recording
DD is the day of recording
YYYY is the year of recording
hh is the hour of recording
mm is the minute of recording
ss is the second of recording
UNCLASSIFIED Page 51
-
8/2/2019 UM_PLB_ES010006101UM04_B
52/64
ATMAS Division UNCLASSIFIED ES010006101UM4E184
Issue B
Date: 27/03/2003
4.7 ORDERS SEQUENCE
As above seen, the SHO order can be executed every time after the startup phase.
To executed the other orders, is necessary to respect a definite sequence.
4.7.1 EXAMPLE OF PLB SESSION
PLB SHO PLB PLB SHO PLB :
PLB STATUS : OFF
P1STATUS : WORK
P2STATUS : WITHOUT DEVICE
P4STATUS : IDLE
PLB SHO FL PLB SHO FL :
FL1 --- ---- ---
FL2 --- ---- ---
....
FLn xxx yyyy zzz
PLB ASF FLA 1 PLB ASF FLA 1 : ORDER ACCEPTED
PLB ASF FLA 1 : FILE ASSIGNED
As above seen, the ASF FLB n order can be executed only if the file B is a continuation file.
PLB ASF FLB 2 PLB ASF FLB 2 : ORDER ACCEPTED
PLB ASF FLB 2 : FILE ASSIGNED
UNCLASSIFIED Page 52
-
8/2/2019 UM_PLB_ES010006101UM04_B
53/64
ATMAS Division UNCLASSIFIED ES010006101UM4E184
Issue B
Date: 27/03/2003
PLB SHO FL PLB SHO FL :
FL1 PLB MAIN DSM
FL2 PLB RES DSM....
FLn xxx yyyy zzz
PLB MOF FLA PLB MOF FLA : ORDER ACCEPTED
PLB MOF FLA : FILE MOUNTED
PLB MOF FLB PLB MOF FLB : ORDER ACCEPTED
PLB MOF FLB : FILE MOUNTED
PLB SHO FL PLB SHO FL :
FL1 PLB MAIN MOU
FL2 PLB RES MOU
....
FLn xxx yyyy zzz
PLB RUN
PLB SHO PLB PLB SHO PLB :
PLB STATUS : ONP1STATUS : WORK
P2STATUS : OPERATIVE
P4STATUS : READ
UNCLASSIFIED Page 53
-
8/2/2019 UM_PLB_ES010006101UM04_B
54/64
ATMAS Division UNCLASSIFIED ES010006101UM4E184
Issue B
Date: 27/03/2003
5. PLB MESSAGES
All the information PLB wants to communicate to the operators are sent as messages anddisplayed, by SMD, on I/O consoles and/or on the CMS windows. There are two types ofmessages:
- notifications (for example the answers to the orders typed by the operators or when someparticular event occurrs)The format of these messages is of two types:
: (case of orders answer)PLB : (case of particular event)
- diagnostics (in case of some errors occurred during the orders execution or if someoperators action is required)
The format of these messages is following :
PLB CODE:PmPRSWppRESxxxxH :where:
m = PLB internal module index (in decimal format) where the error is occurred
1 : P1 process2 : P2 process4 : P4 process
pp = procedure index (in decimal format) into the module where the error isoccurred
xxxx = error code (in hexadecimal format): if it is different from zero, it is a MARAerror code
The list of all PLB messages (the ASCII strings) is reported in the followings paragraphs.
UNCLASSIFIED Page 54
-
8/2/2019 UM_PLB_ES010006101UM04_B
55/64
ATMAS Division UNCLASSIFIED ES010006101UM4E184
Issue B
Date: 27/03/2003
5.1 NOTIFICATIONS
The list of all the ASCII notification strings is the following:
if the internal PLB status is incompatible with any order execution
NO COMMAND ALLOWED IN STAND-BY : the order received is incompatiblewith the PLB status.
COMMAND NOT ALLOWED FOR THIS VR TYPE: the order received isincompatible with the PLB of a Voice Recorder.
if the order syntax is wrong
INVALID COMMAND RECEIVED :syntax error in the command. The commandmust be written correctly.
SYNTAX ERROR: syntax error in the command. The command must be writtencorrectly.
ONLY DIGIT ON xxx PARAMETER: syntax error in the command xxx. Theparameter must be written only with digit.
LENGHT LOG PARAMETER 1..7: syntax error in the command LOG. Thelenght of parameter must be from 1 ..7.
LENGHT CHN PARAMETER 1..3: syntax error in the command CHN. Thelenght of parameter must be from 1 ..3.
OUT OF RANGE : syntax error in the command CHN or MSG. The range of valueis :For CHN from 1 to 128for MSG from 10 to 30.
ONLY DIGIT OR LETTER ON LIN PARAMETER: syntax error in thecommand. The parameter must be written only with digit or letter.
case of the execution of an order with a negative issue caused by a wrong order sequence
COMMAND NOT IN SEQUENCE :the command do not respect the sequence ofthe commands.
case of the execution of an order with a positive issue.
UNCLASSIFIED Page 55
-
8/2/2019 UM_PLB_ES010006101UM04_B
56/64
ATMAS Division UNCLASSIFIED ES010006101UM4E184
Issue B
Date: 27/03/2003
ORDER ACCEPTED : no syntactic error in the command. The command had been
written correctly.ORDER IN EXECUTION : the command has been accepted and it is in progress.
UNCLASSIFIED Page 56
-
8/2/2019 UM_PLB_ES010006101UM04_B
57/64
ATMAS Division UNCLASSIFIED ES010006101UM4E184
Issue B
Date: 27/03/2003
FILE ASSIGNED : positive result of the ASF command.
FILE DEASSIGNED : positive result of the DAF command.
FILE MOUNTED : positive result of the PLB MOF command.
FILE DISMOUNTED : positive result of the PLB DMF command.
PLAYBACK IN PAUSE : positive result of the PAU command.
PLAYBACK IN RUN : positive result of the RUN command
PLAY-BACK IN POSITIONING : positive result of the PLB POS command.
PLAY-BACK ALREADY IN POSITIONING : positive result of PLB POScommand, because XPL is already in advance;
DEVICE DEASSIGNED : positive result of deassignement of device.
case of the execution of an order with a negative issue
ERROR IN EXECUTION : the operation is finished with error. To control the
peripherals status, their assignation or the possible others diagnosticmessages to send.
EMPTY FILE : NO DATA : negative result of the MON FLn command, becausethe file is not assigned or the file is assigned but there is no data.
UNCLASSIFIED Page 57
-
8/2/2019 UM_PLB_ES010006101UM04_B
58/64
ATMAS Division UNCLASSIFIED ES010006101UM4E184
Issue B
Date: 27/03/2003
FILE IN BACKUP : negative result of the ASF command, because there was a
backup in progress.FILE ALREADY ASSIGNED : negative result of the ASF command, because
the device is already assigned to the CSCI XRE or the CSCI XPL .
NO FILE ASSIGNED TO PLB : negative result of the DAF command, becausethe file had not been assigned to PLB.
NO DATA : negative result of the SHO DAT command, when PLB was not in run.
ORDER NOT ACCEPTED : PLAYBACK IN RUN : negative result of the DAF
command for file main ( FLA ).
PLAYBACK ALREADY IN PAUSE : negative result of the PAU commandbecause PLB is already in pause.
PLAYBACK ALREADY IN RUN : negative result of the RUN command becausePLB is already in run.
COMMAND ABORTED : the command is refused by the operator.
COMMAND NOT IN SEQUENCE : the command does not respect the correct
sequence of the commmands (see paragraphs "Orders Sequence").
UNCLASSIFIED Page 58
-
8/2/2019 UM_PLB_ES010006101UM04_B
59/64
ATMAS Division UNCLASSIFIED ES010006101UM4E184
Issue B
Date: 27/03/2003
OTHER FILE ALREADY ASSIGNED TO PLB : negative result of the PLB ASFcommand, because an another device is already assigned to the CSCI
XPL.
FILE EMPTY : FILE NOT MOUNTED : negative result of the PLB MOFcommand, because no device is mounted.
DEVICE ALREADY DISMOUNTED : negative result of the PLB MOFcommand, because the device had already been dismounted.
DEVICE ALREADY ASSIGNED : negative result of assignement of device.
DEVICE ALREADY DEASSIGNED : negative result of the PLB DEA VRcommand, because the device had already deassigned.
FILE NOT MOUNTED
INVALID CONTINUATION FILE : negative result of the PLB MOF FLBcommand, because the file B is not continuation file.
FMS ERROR : FILE NOT MOUNTED : negative result because the file is notpresent on disk.
UNCLASSIFIED Page 59
-
8/2/2019 UM_PLB_ES010006101UM04_B
60/64
ATMAS Division UNCLASSIFIED ES010006101UM4E184
Issue B
Date: 27/03/2003
5.2 DIAGNOSTICS
The following messages are displayed on I/O console:
TIME IS NOT ON FILE : negative result of the PLB POS command, because thedate and the hour are not valid on file.
The possible explanation string of internal error codes for the Playback CSCI, are:
"CONVERSION ERROR"
"CREATE PATH ERROR"
"BUFFER BOUNCED"
"GET WORK AREA ERROR"
"PATH DETACHED"
"RELEASE WORK AREA ERROR"
"REPLY WITH NOK RESULTCODE"
"INVALID PU INDEX""INVALID MESSAGE RECEIVED"
"UNKNOWN MESSAGE RECEIVED"
"PLB TO SMD PATH OVERFLOW"
"PLB TO SMD PATH OVERFLOW RECOVERY"
The following internal errors are specified in according to the module in which it occurred.
UNCLASSIFIED Page 60
-
8/2/2019 UM_PLB_ES010006101UM04_B
61/64
ATMAS Division UNCLASSIFIED ES010006101UM4E184
Issue B
Date: 27/03/2003
P1 (1) PROCESS:
"CREATE BUFFER ERROR"
"DELETE FILE ERROR"
"ATTACH PATH ERROR"
"OPEN FILE ERROR"
"OPEN PATH ERROR"
"READ FILE ERROR"
"CREATE FILE ERROR"
"WRONG MESSAGE STATUS"
"CREATE TIMER ERROR"
"INVALID POINTER"
"INVALID .DII FILE"
"CLOSE PATH ERROR"
"DELETE FILE ERROR"
"WRITE FILE ERROR"
"INVALID PU INDEX"
"RESTART COMPLETED"
"PRINTER RECOVERY NOT OK . DEVICE DEASSIGNED"
"OPEN ERROR"
"RECEIVE ERROR"
"READ DIRECTORY FILE ERROR""CLOSE DIRECTORY FILE ERROR"
"OPEN DIRECTORY FILE ERROR"
"RECEIVE / ATTACH PATH WITH DIRECTORY FILE ERROR"
"ATTACH PATH WITH DIRECTORY FILE ERROR"
"ERROR DATABASE MAY BE CORRUPTED"
P2 (2) PROCESS:
"MESSAGE RECEIVED IN STAND-BY STATUS"
"INVALID MESSAGE RECEIVED"
"CREATE TIMER ERROR"
"INVALID INTERNAL STATUS"
"INVALID MESSAGE DESIGNATOR"
"INVALID SENDER DESIGNATOR"
"UNCORRECT MESSAGE FORMAT"
UNCLASSIFIED Page 61
-
8/2/2019 UM_PLB_ES010006101UM04_B
62/64
ATMAS Division UNCLASSIFIED ES010006101UM4E184
Issue B
Date: 27/03/2003
"TIMER ALLIGNAMENT"
P4 (4) PROCESS:
P4 OPEN NOK
P4 CLOSE NOK
P4 SEEKREAD NOK
P4 SEEKWRITE NOK
P4 INTERNAL ERROR
P4 ATTACH PATH NOK
P4 GET PATH STATUS NOK
P4 FMS BUFFER NOT AVAILAIBLE
P4 LOCAL BUFFER NOT AVAILAIBLE
P4 NODAL BUFFER NOT AVAILAIBLE
P4 COMMAND MESSAGE OUT OF SEQUENCE
P4 RESULT_CODE OF REL$WORK$AREA NOK
P4 RECEIVED BUFFER WITH STATUS < > 0
P4 INVALID ACCESS TO AUTOMA STRUCTURE
P4 RECEIVED BUFFER WITH ERRRONEUS INFORAMATIONP4 FILE BUFFER NOT AVALAIBLE
P4 DIR BUFFER NOT AVALAIBLE
UNCLASSIFIED Page 62
-
8/2/2019 UM_PLB_ES010006101UM04_B
63/64
ATMAS Division UNCLASSIFIED ES010006101UM4E184
Issue B
Date: 27/03/2003
5.3 PLB STOP EVENTS
In some cases the errors detected by PLB prevent the correct continuation of PLB execution. Inthese cases PLB sends to the kernel a stop signal to advise it that it is not more able tocontinue the execution.
The events that cause these fatal error are called stop events and are usually the impossibility toobtain some resources as:- to open a path with others CSCI- to create a mailbox- to create a process
- to create a bufferor when the PLB configuration parameters are incompatible with node configuration.
UNCLASSIFIED Page 63
-
8/2/2019 UM_PLB_ES010006101UM04_B
64/64
ATMAS Division UNCLASSIFIED ES010006101UM4E184
Issue B
Date: 27/03/2003
6. DEGRADED EXECUTION
Not applicable.
top related