using your diagnostic station
Post on 23-Mar-2016
21 Views
Preview:
DESCRIPTION
TRANSCRIPT
Using your Diagnostic StationUsing your Diagnostic Station
ADC by SunTech Adview features
• Overview of the ADC ADC by SunTech by SunTech AdviewAdview• Taking an automated BP measurement• Taking a manual BP measurement• Taking a temperature measurement• Taking an SpO2 measurement
• Recalling the last reading• Clearing the last reading• Need help?
Contents
Overview of the ADC by SunTech Adview BP Module
Pressure column1 bar = 10mmHg
Automatic button
Manual button
Warning icon
Cuff/Hose Error icon
Systolic BP/Cuff pressure
Diastolic BP
Pulse rate icon
MAP icon
Pulse rate/Mean Arterial Pressure (MAP)
Contents
Overview of the fully configured ADC by SunTech Adview
TemperatureMode button
Retention clip
Temperature Module
Signal quality
Contents
BP Module
SpO2 Module
Press the auto button to take an automatic measurement ORPress and hold the manual button to inflate the cuff, and take a traditional manual reading with a stethoscope
Taking a BP Measurement
Contents
Taking an automated BP measurement
1.1. Wrap cuff snugly around upper arm. Wrap cuff snugly around upper arm. Click here to visit the to visit the ADC website for further details on proper placement.ADC website for further details on proper placement.
2.2. Ask the patient to stay still and quiet, press and release the Ask the patient to stay still and quiet, press and release the automatic button to start an automatic measurement.automatic button to start an automatic measurement.
3.3. A measurement is displayed in about 35-40 secondsA measurement is displayed in about 35-40 seconds
Contents
Taking a manual BP measurement1.1. Wrap cuff snugly around Wrap cuff snugly around
upper arm and position your upper arm and position your stethoscope.stethoscope.
2.2. Press and hold the manual Press and hold the manual button to inflate the cuff to the button to inflate the cuff to the desired pressure.desired pressure.
3.3. Watch the pressure displayed Watch the pressure displayed and quickly release the and quickly release the button to deflate the cuff at button to deflate the cuff at 3mmHg/sec.3mmHg/sec.
1.1. When the measurement is determined, press the auto button to When the measurement is determined, press the auto button to completely deflate the cuff.completely deflate the cuff.
Contents
Taking a temperature measurement
1.1. Place a disposable cover on the blue probe; the display Place a disposable cover on the blue probe; the display shows the type of measurement, (oral). shows the type of measurement, (oral).
2.2. Wait for the device to beep. Wait for the device to beep. 3.3. Then, place the probe under the patient’s tongue; the Then, place the probe under the patient’s tongue; the
posterior medial sublingual pocket is preferred for accuracy. posterior medial sublingual pocket is preferred for accuracy. 4.4. A “traveling dash” displays for 10-15 seconds until a reading A “traveling dash” displays for 10-15 seconds until a reading
is displayed. is displayed. Contents
Taking an SpO2 measurement
For the reusable finger sensor, insert the patient’s digit into the For the reusable finger sensor, insert the patient’s digit into the sensor; a “traveling dash” displays for 10-20 seconds until a sensor; a “traveling dash” displays for 10-20 seconds until a reading is displayed. The reading is updated every second.reading is displayed. The reading is updated every second.
Contents
Recalling the last reading
Note: Measurements are displayed for 2 minutes after which the display showsNote: Measurements are displayed for 2 minutes after which the display shows - - -
Press and hold the Automatic BP button for 2 - 3 seconds to Press and hold the Automatic BP button for 2 - 3 seconds to display the last measurement values.display the last measurement values.
Contents
Clearing the last reading
Note: If there are privacy concerns with regards to measurements on the display, you Note: If there are privacy concerns with regards to measurements on the display, you can clear the display. Once cleared, they cannot be recalled.can clear the display. Once cleared, they cannot be recalled.
Press and hold the Automatic BP button for 5 - 6 seconds to Press and hold the Automatic BP button for 5 - 6 seconds to clear the last measurement values.clear the last measurement values.
Contents
top related