wall-e prototype i
Post on 16-Feb-2016
31 Views
Preview:
DESCRIPTION
TRANSCRIPT
Wall-E Prototype I
Team: 1Hang Xie
The design project Wall-E Prototype I is an intelligent automated trash collecting robot with obstacle detection capability. The robot responses to either user’s direct manual control, or the object tracking software, to locate and collect the targeted trash object (This prototype uses a colored ping pong ball as the prescribed target object – the “trash”).
Constraints
• Robotic arm gripper Max open: 55mm(40mm for a ping pong ball)• Deck dimensions: 7.25” W* 7.25”L(4”*4”PCB; 3”
x 2.5“ H-bridge; 3”*1.8”*2” camera; 1.61" x 4.80" x 1.65" battery)• Dimensions: 11” W* 10” L * 5 H• H-bridge and motor on the top of the deck for
heat dissipation.• Weight should be within 7 lbs • Speed = 5.2 in/sec
DustBot
• Size: 2 wheel
• Capacity: 40 kg
• Packing: full-body plastic
Sand Flea
•Weight: 11lb• Dimension:
13”L*18”w * 6”H• Power: 2 hours• Speed:3.4 mph• Temperature: -
15C to 45C, water resistant
top related