warning · warning to reduce risk of fire or shock hazard, do not expose this product to rain or...
Post on 06-Apr-2020
0 Views
Preview:
TRANSCRIPT
WARNING
To reduce risk of fire or
shock hazard, do not
expose this product torain or moisture.
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOTREMOVE COVER (OR BACK). NO USER SERVICEABLE
RISKOFELECTRICSHOCK PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICEDO NOT OPEN PERSONNEL.
This symbol indicates "dangerous
_, This symbol indicates _t, voltage" inside the product thatimportant instructions _ presents a risk of electric shock oraccompanying the product, personal injury.
Cautions
NCaution: To reduce the risk of electric shock, match the wide blade of the power
cord to the wide slot in the AC outlet. Be sure to insert the plug completely.
Attention: Pour viter les chocs lectriques, introduire la lame la plus large de la
fiche dans la borne correspondante de la prise et pousserjusqOau fond.
Refer to the identification/rating label located on the back panel of your product
for its proper operating voltage.
FCC Regulations state that unauthorized changes or modifications to this
equipment may void the user € authority to operate it.
Cable TV Installer: This reminder is provided to call your attention to Article820-40 of the National Electrical Code (Section 54 of the Canadian Electrical Code,
Part 1) which provides guidelines for proper grounding and, in particular, specifies
that the cable ground shall be connected to the grounding system of the building
as close to the point of cable entry as practical.
Care and Cleaning: Use a soft cloth or the dusting attachment of your vacuum cleaner to dust your
VCR. Remove dust from both top and bottom ventilation holes.
Plastic surfaces are easily scratched and can be marred by alcohol and varioussolvents. Avoid excessive use of oil-based furniture polishes since the materialsused in the cabinet will accumulate more dust. A nonabrasive, antistatic cleaner/
polisher is recommended.
Product Registration
Please fill out the product registration card and return it immediately, Returning the card allows us to contact you if needed.
Keep your sales receipt to obtain warranty parts and service and for proof of purchase. Attach it here and record the serial and modelnumbers in case you need them. The numbers are located on the back of the receiver.
Model No. VG4269
Serial NO.
Purchase Date:
Dealer/Address/Phone:
i
First Things First ....................... i .................... 3
Setting Up the VCR ....................................... 7
Using the Menu to Set Up Features .............. 8
Language Selection .................................. 8
Cable TV Setup .......................................... 9
VCR Channels List ................................... 10
Auto Scan for Channels .................... 10
Adding or Removing Channels ......... 11Time and Date ......................................... 12
Setting Time and Date ...................... 12
Second Audio Program .......................... 13
VCR Basics ...................................................... 15
Remote Control Buttons .............................. 16
Playing a Tape .............................................. 17Automatic Rewind ....................................... 18
Tape Eject ..................................................... 18
Recording ..................................................... 18
Check the Safety Tab .............................. 18
Recording ....................................................... 19
OTR Recording ............................................. 20
Timer Recording ........................................... 21
Stopping a Timer Recording .................. 22
Reviewing and Clearing Programs ........ 22
Recording Broadcast Stereo or SAP
(Second Audio Program) TV ..................... 23
Recording Audio Only ................................. 23
Playing Back Audio Only ............................. 24
Copying and Editing Tapes .......................... 24
Other Features ............................................. 25
Picture Search Options ................................. 26Forward and Reverse Search .................. 26
Slow Motion ............................................ 26
Tracking ................................................... 27
Time Counter .......................................... 27
On-screen Displays ....................................... 28
Audio Setup Features .................................. 28
Reception ................................................ 29
Tape Playback ............................................... 30
Connections .................................................. 31
Connecting Youro VCR ................................... 32Jacks and Cables ........................................... 32
RF Jacks and Coaxial Cables (F-type) ..... 32
AudioNideo Jacks and Cables
(RCA-type) ............................................ 32
Choosing a VCR Connection ....................... 33
Advantages of AudioNideo CableConnections .......................................... 33
TV with RF Jack Only .............................. 34
TV with AudioNideo Jacks ..................... 35
TV with AN Jacks and Cable Box to
Unscramble Pay Channels Only ........... 36
Reference ....................................................... 37
Front Panel ................................................... 38
Display Panel ................................................ 39Back Panel .................................................... 40
Troubleshooting Tips ................................... 41
How to Find Your TV's
Video Input Channel ................................. 45
Specifications ................................................ 46
Cleaning the VCR ............................... .......... 46
Limited Warranty ......................................... 47
Index ............................................................. 48
2
Welcome To Your New VCR...
To help you get started using your VCR with as
little reading as possible, we've put all the basicinformation needed in the first three sections. To
help you out, there's even an initial setup feature
the first time you turn on your VCR which walks
you through several set up steps at once.
Getting Started
Before this first step, though, learning aboutthe time and date, your remote control's features,
working with channels, and basic video tape
operations are essential to get all you can out
of the VCR. Once you are comfortable with thesefeatures, feel free to refer to other sections
because they cover the more detailed information.
r1 FIRST THINGS FIRST
V
V
¥
V
What Remains?
The final sections of this manual contain
playback and recording information, a detailedconnections section, and a reference section
including troubleshooting tips, warranty
information, and an index.
V
V
READ ME!
These note boxes give you tips foryour new video cassette recorder.
3
Step 1: What's in the Box?
The following items come packed in the box:
VCR
Remote control
RF coaxial cable
2 "AA" Batteries
STEP 2: Install Batteries in the
Remote Control
J I
Follow these steps whenever you need to install or change the
batteries in your VCR remote.
1. Remove the cover of the battery compartment.
2. Place the batteries into the remote's back panel. Match the
positive (+) and negative (-) ends of each battery to the
diagram inside the battery compartment.
3. Replace the cover.
STEP 3: Connect Your VCR
If you connect your VCR to your home antenna or cable system
and then to your TV, use the VCR's ANT IN and RF OUT jacks for
a good signal as shown to the right.
If you have a TV with AUDIONIDEO jacks, use the jacks for a
better connection. Refer to the section, Connections, toward
the back of the manual, for additional connection options.
STEP 4: Plug in the VCR
Your VCR°s power cord has a plastic band strung through the
blades. Remove plastic band before plugging the cord into
the power outlet. To remove band, cut with a pair of scissors
and pull it free of the blades. Once the plastic is removed, match
the wide blade of the power cord to the wide slot in the ACoutlet. Be sure to insert the plug completely.
CABLE, CABLE BOX, OR ANTENNA_
VCR
I
iTM ojq4
STEP 5: Tune the TV
Tune the TV to the VCR viewing channel. The VCR viewing
channel is channel 3 or 4 or the TV's video input.
If you connect your VCR using the ANTENNA connectorswith RF coaxial cable, set the 3 CH. 4 switch to channel 3
or channel 4--the channel you want to use on your TV.
If you connect your VCR using the AUDIO/VIDEO jackswith audio/video cables, select the TV's video input with
the remote control's INPUT button to see the signal. For
more information see, "How to Find Your TV's Video inputChannel," in the Reference section of this manual.
STEP 6: Turn on the VCR
Press POWER on the VCR's front panel or the POWER button
on the remote control to turn on the VCR. After connecting
your VCR to a TV correctly and tuning to the proper viewing
channel, the first time you turn the VCR on, press the MENU
button to display LANGUAGE screen. This is the start of aninitial set up which helps you set different options for yourVCR.
STEP 7: Initial Setup
Your VCR will ask you to select a language after it has been
hooked up to the TV, plugged in, and turned on. Then pressthe MENU button.
VCR Viewing Channel
/ IA/V input/output jacks Channel 314 switch
When using the ANT IN and RF OUT
jacks to connect your VCR, tune yourTV to channel 3 or 4.
The 3-4 switch on the back of the VCRdetermines which TV channel is used
to see VCR's picture.
When using the AUDIO/VIDEO jackson the rear of the VCR to connect to
your TV, you must tune to the TV'svideo input channel. For moreinformation about selecting yourvideo input channel see, "How to FindYour TV's Video Input Channel," inthe Reference section of this manual.
LANGUAGE
I
ERAN_AIS
ESPA_OL
SELECT=(A T)
END=tMENU)
English is selected as the default language but you can
change it to French or Spanish by using the • • arrow
buttons on the remote control to highlight your selection.
When the language you want all screens to appear in ishighlighted, press the MENU button on the remote control.
5
STEP 8: Access the Menus
The MENU and arrow buttons let you access, select, and change
your VCR's preferences. For example, once you have finished
choosing a language, it would be a good time to set the timeand date.
The VCR's main MENU will be displayed once you are finished
choosing a language. In the main MENU, you are offered the
choices of PROGRAM, SET UP, and PRESET.
1.
2.
Use the • • arrow keys to highlight the PRESET selection,
and press ENTER on the remote control to select it.
In the PRESET menu, the CLOCK SET selection is
highlighted by default. Press the ENTER button on the
remote control to display the next menu:
CLOCK SET
TIME DATE YEAR
SELECT_(A•_ b)
ENO=(RENU)
MENU
PROGRAM
SET UP
SEEN PRESET
CH MEMORY
SELECT=(AV)END=(MENU)
Use the remote control's • • arrow
buttons to highlight the menu selections
you want, Then, press the ENTER button to
make your selection.
. The • • <, arrow buttons on the remote control are used
to highlight different parts of the time and date. The hour is
highlighted first by default, and "12" is blinking. Use the
• v arrows to set the hour. To change the hour to PM, scroll
with the • • arrows until the right hour is selected.
Next, highlight the minutes using the <, arrow buttons on
the remote control. Select the proper time using the • •
arrows again to scroll through the numbers.
The date and year are selected by first highlighting the
number with the 4, arrow buttons and then using the
• • arrow buttons to scroll to the proper numbers. When
you are finished setting the date and time, press the MENUbutton on the remote control to return to the main MENU.
All other on-screen menus work in a similar method usingthe remote control to follow on-screen instructions. See the
next section, Additional Set-Up Features, for detailedinformation about accessing individual menus.
6
On-screen Guide and
Additional Setup Features
Below is a list of setup features that you need to
set up before using your VCR for the first time.
Select a Language
Cable/Antenna Selection
Setup for a Cable Box
Set up the Antenna
Set time and Date
2¥
SETTING UP THE VCR
V
V
Set Up the VCR's Channels (Auto Scan)
Adding and Deleting Channels
Setup a Second Audio Program (SAP)
V
V
V
7
Using the Menu to Set Up Features
You can set up your VCR's features by using the remotecontrol's buttons to enter your choices from on-screen
instructions. Each menu item is explained in this section.
There are a few setups that need to be completed before other
features can be used. For example, before you can record a
show using the PROGRAM feature, you must first set the timeand date and scan for available channels.
Before you can make any selections though, you must first
determine which language you want your VCR to displayinformation.
Language Selection
1. On your remote control, press the MENU button to displaythe VCR's main MENU.
MENU
PROGRAN
.
PRESET
SELECT=(&• ENTER)
END=(RENU)
Use the remote control's Av arrow keys to highlight theSET UP selection, then press ENTER on the remote control.
SET UP
I [L]I.'BJSAP SET ON
ANTENNA NRNUB
_ ENGmr_r.J:m
SELECT=(k•• _)
END=(MENU)
3. Use the • • arrow buttons on the remote control to
highlight the LANGUAGE selection. Then, use the <-
arrow buttons on the remote to highlight English (ENG),
Fran_ais (French) (FRA), or Espafiol (Spanish) (ESP). When
the proper language is highlighted, press MENU on theremote to return to the main menu.
On-Screen Menus
Not all the VCR screens are shown in
this manual when explaining thefeatures.
8
Cable TV Setup
This setup applies only when you have cable television. To select
between a regular TV antenna and a cable input:
1. Press MENU on the remote control to display the VCR'smain MENU.
MENU
PROGRAR
SET UP
.
SELECT=(A• ENTER)END=(HENU)
Use the • • arrow keys to highlight the PRESET selection,
and press ENTER on the remote control.
PRESET
CLOCK SET=_
SELECT=(A•)END=(MENU)
, Use the • • arrow keys to highlight the CH MEMORY
selection, and press ENTER on the remote control.
EH RERORY
m] IEATEAUTO SCAN ON
ADO CH --CH
ERASE EH --CH
SELECT=(&•" ")END=(RENU)
4, Use the < m,arrow buttons on the remote to highlight theCATV selection, then press MENU on the remote control.
Your VCR is now set up to accept a cable signal. You will
tune to the channel that your TV uses to see the signal. If
recording cable TV programming, you need to make surethe VCR is set to this same channel (usually 03, 04, or the
Video Input Channel).
Video Input Channel?
If you use your Audio/Video jacks toconnect your VCR to your TV, thenyou need to tune to the TV's videoinput channel to see the picture.
For more information on the superiorquality of a video input channelpicture, see How to Find Your TV'SVideo Input Channel in the Referencesection of this manual or your TV'sUser's Guide,
9
VCR Channels List
Your VCR may come with a channel list preset at the factory,
but you will probably want to add or delete channels
depending on personat preference, and whether channels areactive in your area. If you have cable television, you will want
to set the antenna for CATV (see previous page).
Using Auto Scan to Search for ChanneLs
I. Press the MENU button on your remote control to displaythe VCR's main MENU.
MENU
PROGRAM
SET UP
iw
2.
SELECT=(&• ENTER)END=(MENU)
Use the • • arrow keys to highlight the PRESET selection,
and press ENTER on the remote control.
PRESET
CLOCK SET=m,,..
SELECT=(k •)ENO=(MENU)
3. Use the •• arrow keys to highlight the CH MEMORY
selection, and press ENTER on the remote control.
CH MEMORY
TV/CATV TV CATV
r I _NADD CN --CH
ERASE CH --CH
SELECT=(&•< ")END=(RENU)
4. Use the •• arrow keys to highlight the AUTO SCAN
selection, and then use the • • arrow keys to highlight ON.
10
Auto Scan
Use the Auto Scan feature to placeall available channels in memory.
If you ever change cable or antennasignals, you may need to Auto Scanagain.
]
The VCR begins scanning for the available channels--thistakes about one to-two minutes.
If you have CATV selected, then the VCR searches for cablechannels.
If you have TV selected, then the VCR searches for localbroadcast stations.
When the scan is complete, the VCR will blink the OFFselection under the AUTO SCAN selection.
Adding or Removing Channels
You may want to add or remove channels after you AUTO
SCAN, especially if some of the channels have weak signals oryou don't want to watch them.
1. Press MENU on the remote control to display the VCR's
main MENU, then scroll until the PRESET selection is
highlighted and press ENTER.
2. Use the A v arrow keys to highlight the CH MEMORYselection, and press ENTER on the remote control.
3. To add channels, use the • • arrow keys to highlight the
ADD CH selection, and the screen displays:
CH HEHORY
TV/CATV TV CATV
AUTO SCAN OFF ON
I - -I_amERASE CH --CH
BIB TO SET CHPUSH 0-9 KEYS BB
SELECT=(AV)END=(RENU)
4.
5,
Use the 0-9 buttons on the remote to enter the channel youwish to add. The cursor will blink for a moment over the
ADD CH heading and then return to the -- once the channel
has been added to memory.
To remove a channel, use the • • arrow buttons to highlightthe ERASE CH selection.
Continued on Next Page
Selecting Channels
The Channel up and down buttonsaccess those channels active in
your VCR channel list.
You can still access channels not
on the channel list by using thenumber buttons on the remotecontrol,
11
CH RERORY
TV/CATV TV CATV
AUTO SCAN O_rF ON
ADD CH --CH
;_ - -r,mi TO SET CH
PUSH 0-9 KEYSiSELECT=(AV)
END=(MENU)
Use the 0-9 buttons on the remote control to enter the
channel you wish to remove. The cursor will blink for amoment over the ERASE CH header and then return to the
-- prompt.
Time and Date
The time and date need to be set before you can record any
show you program into the VCR's memory. Time and date must
also be set before the clock will display properly on the front ofthe recorder.
Setting Time and Date
1. Press MENU on the remote control to display the VCR'smain MENU.
HENU
PROGRAM
SET UP
2.
SELECT=(&• ENTER)END=(RENU)
Use the Av arrow keys on the remote control to highlight
the PRESET selection, then press ENTER on the remotecontrol.
PRESET
CH NENORY
SELECT=(& T)ENP=(RENU)
3. The CLOCK SET selection is already highlighted. Hit theENTER button on the remote control to access the menu.
12
CLOCK GET
TIME DATE YEAR
4.
SELECT=(&•4 ")
END=(MENU)
Use the &v arrow keys on the remote control to scroll
through the time until the right hour is selected (includingAM or PM). Use the arrow buttons to select minutes, month
and date, and finally the year using the arrow buttons to
scroll to the right number. Once you have set the time and
date, press ENTER on the remote control to return to the
previous MENU.
Second Audio Program
Some broadcasters may offer programs with stereo audio or a
Second Audio Program (SAP). To take advantage of this second
audio signal, you must first turn on the VCR's SAP feature:
1. Press the MENU button on the remote control to display theVCR's main MENU.
RENU
PROGRAH
2.
PRESET
SELECT=(&• ENTER)
ENG=(MENU)
Use the • • arrow keys on the remote control to highlight
the SET UP selection, then press ENTER on the remotecontrol.
SET UP
_,= = _FFANTENNA RANUmlim
LANGUAGE m FRA ESP
SELECT=(k•4 ")
END=(RENU)
3, In the SET UP menu, the SAP selection is already
highlighted. The cursor blinks over the OFF position. To turn
on SAP, use the ,4• arrow buttons on the remote control to
move the highlight over the ON selection. When you are
finished, press MENU to return to the previous screen.
13
Learning the Basics to GetYou Started
These VCR basics should be enough for you to
begin enjoying your VCR. Learning to use the
remote control functions, play a recorded tape,
and record a program will help you get the most
out of your VCR.
This section shows you the basics of using your
VCR. It discusses things like using the remote
control, playing a tape, and recording programs.3
V
VVCR BASICS
VI
V
V
V
I VCR Basics tells you what you need |
to know in order to watch a movie Jor tape your favorite show.
15
Remote Control Buttons(In alphabetical order)
AUDIO SEL toggles the VCR's audio output between Stereo,Mono L, and Mono R.
CHANNEL Up or Down Selects next higher or lower channel
in the VCR's channel memory. Also used to scroll up and down
through on-screen display choices,
CLK/CNTR Toggles between the clock and tape counter displays
both on-screen and on the VCR's front panel.
EJECT Ejects a tape inserted in the VCR.
ENTER Selects a highlighted on-screen display.
FWD Fast forwards the tape when the VCR is stopped. Searches
forward through a tape during playback ("Cue"). Pressing this
button twice toggles between Cue mode and fast-forward mode.
mFINFD Shows/hides the status displays on the TV screen.
INPUT SELECT Toggles between the line input and the VCR's
tuner. Line input refers to the signal coming from the componentconnected to the AUDIO/VIDEO IN jacks on the front of the VCR.
MENU Brings up VCR's main MENU on the TV screen. Also exits
out of menu screens to the previous menu.
Numbers (0 through 9, 100) Select a channel up to 99 by
pressing the 0-9 buttons. Select a cable channel over 99 by
pressing the 100 button. When 1- - appears on the screen, pressthe other two numbers.
PAUSE Pauses playback or recording. Press PAUSE again to
return to playback or recording.
PLAY Plays a tape.
POWER Turns the VCR on or off.
REC. OTR Pressing both buttons starts VCR recording. When
both buttons are pressed again, the VCR is set to record for a
specific duration of time before automatically shutting off.Record times are built in half hour intervals from two to six hours.
RESET Resets time counter to 0:00:00. Allows you to change
entries when setting a timer recording.
REV Rewinds the tape when the VCR is stopped. Searches
backward ("Cues") through a tape during playback. Starts slow
motion during play-pause and decreases slow-motion speed.
_"_WER TIMER
RESET
INPUT_
TV'VCR
CLK.CNI_
AUDIOSEL
MEN[
16
SHIFT Used to move a cursor right and left in on-screen displaychoices.
SLOW Used for slow-motion playback. Pressing this button asecond time slows playback more.
SP.EP Selects a recording speeds Standard Play (SP) or ExtendedPlay (EP).
STOP Stops the current VCR function such as record, playback,rewind, or fast forward.
TIMER Readies the VCR for a timer program, and is designated
when the " [] " symbol lights on the front panel. Require that a
timer program has been correctly set and a videotape with thesafety tab in place is in the VCR.
TV,VCR Switches the picture signal so that it either comes from
the VCR or cable/antenna system.
n,Tm_ i i i
.LI:L-ILI:LILISP
Playing a Tape
1. Tune the TV to your VCR viewing channel (3, 4, or the TV'svideo input) and hit the TVoVCR button on the remote so that
the VCR display appears on the VCR'e front panel.
2. Insert a tape in the VCR.
The VCR display indicates that the unit is in
VCR mode, suitable to watch a tape.
J "
The tape automatically begins playback (if the safety tab onthe cassette is removed).
Press FWD or REV to position the tape.
Press PLAY on the VCR or remote control (if necessary) to
begin tape play.
Press PAUSE on remote for Still Picture.
Press SLOW on the remote control for slow motion playback.
Press STOP/EJECT on VCR (STOP on remote) to stop playback.
Pause
If you pause, the VCR automaticallyswitches from pause to PLAY after afew minutes to reduce tape wear.
Automatic Tracking
The VCR has automatic trackingwhich adjusts the picture whenplaying back a tape recorded onanother VCR. Automatic trackingis turned on whenever a tape isinserted or the VCR's power isturned on.
17
Automatic Rewind
The VCR automatically rewinds a tape if it reaches the end
of the tape during playback.
Tape Eject
Press STOPeEJECTon the VCR (EJECT on the remote) when a
tape is stopped to eject it. A tape can be ejected even when theVCR is turned off.
Recording
If you want to record something that you're watching, you can
use basic recording methods:
1. Set the tape speed by pressing the SpoEp button on the
remote to change between SP and ER
2. Press the RECORD button (REC/OTR buttons on the remote)
to begin recording.
3. Press STOP to stop recording.
If you just want to pause the recording for a short time
(such as during a commercial), press PAUSE instead of STOR
To resume recording, press PAUSE.
Check the Safety Tab
No matter how you record, you need to make sure there is a
tape in the VCR, and that the safety tab on the tape is notremoved. You cannot record on a tape whose safety tab is
missing.
If the safety tab is removed and you want to record over it,
simply cover the space with vinyl tape.
Safety Tab
18
Several Recording Options
Now that you've gone through the basic steps
necessary to operate your VCR, it's time to explain
the different advanced recording features available
to suit your needs.
Recording Features on your VCR include:
Recording (explained inthe VCR Basics section)
OTR Recording
Timer Recording
Broadcast Stereo or
Second Audio Program (SAP)
Audio Only Recording
Copying and Editing Tapes
4
¥
¥
VRECORDING
V
V
V
19
Recording Features
There are three ways to record programs:
Recording- pressing one button to start recording aprogram (see VCR Basics section).
OTR Recording- starts recording a program already being
watched, and automatically stops the recording after
a designated period of time.
13mer Recording-- automatically starts and stops a
recording at a predetermined time and date.
OTR Recording
Use OTR recording when you want to quickly record the
remaining portion of the program you are watching.
I, Set the tape speed to SP or EP by pressing the SpoEp buttonon the remote control. The current speed is reflected on-
screen (if you have this option selected by using the INFObutton on the remote control), and on the VCR front panel.
2. Press the REC button (REC/OTR buttons on the remote
control) to begin recording.
3. Repeatedly press the REC/OTR buttons on the remote to set
end time of the recording.
OTR 12:30 • IEP 36
(Screen shown is just an example)
Each time you press the REC/OTR button, you increase the
recording time to the next half-hour (up to 4 hours total). Whilethe VCR is in this recording mode, the front panel display willblink the time that the VCR is scheduled to shut off.
The VCR continues to record and then automatically turns off at
the time you select.
To stop an OTR recording, press the STOP button on the remote
control (STOP/EJECT on the front panel).
OTR Recording
OTR recording is a great way totape the last quarter of the game,or the last pert of a movie whenyou have to leave.
2O
Timer Recording
You can set up as many as six timer recording programs.
1. Press MENU on the remote control to display the VGR'smain MENU.
2. The PROGRAM selection should be highlighted. Press theENTER button on the remote control.
PROGRAM
CH DATE ON OFF SPD
e_• -- -1-- -:-- -:--• -- -/-- -:-- -:--
-- -I-- -:-- -:---/-- .:.- -;__
• -_ -I-- -:-- -:-- -$ELECT=(&Y _1_)
END=(RENU)
.
4,
.
6.
Use the • arrow button on the remote control to highlightthe CH field. Use the number buttons on the remote control
to enter the channel of the recording. Use the 100 button toenter channels over 100, then add the other two numbers
using the 0-9 buttons.
Use the • arrow button on the remote control to highlight
the DATE field. Scroll through the dates using the • • arrowbuttons on the remote control.
If you want to program a show to record once a week orevery day Monday through Friday, scroll through a month ofdates (alternatively, you can just use the • down button on
the remote control when the date field is first highlighted).
Choose MO~FR for daily recording during th e standard workweek. Choose WKLYSU through WKLYSA for once a week
recordings.
Use the • arrow button on the remote control to highlightthe first ON field, the hour. This field marks the start time of
the program. Scroll to the correct hour, including AM or PM,
using the • • arrow buttons on the remote control.
Use the • arrow button on the remote control to highlightthe next ON field, minutes. Scroll to the correct minute
using the • • arrow buttons on the remote control.
Use the • arrow button on the remote control to highlightthe hour field of the next section, OFF. This section marks
when the timer recording will stop.
Set the hour and minutes the same way as in the ON field,
making sure to scroll to the correct AM or PM time.
(Continued on Next Page)
_mer Recording Information
The Clock must be set correctly.
Insert a tape with the safety tab inplace and enough tape to recordthe program.
When recording from a cable box orsatellite receiver, turn on that unitand tune it to the channel you wantto record before the recording is tobegin. The VCR channel should beset to the cable box's output channel(usually Channel 3 or 4).
21
7.
8,
Finally, set the speed of the recording to either Standard
Play (SP) or Extended Play (EP). You can either use the SP°EPbutton on the remote control to do this, or highlight the SPD
field in the PROGRAM menu using the <P, arrow buttons onthe remote and using the Av arrow buttons on the remote
control to toggle between the two speeds.
Review the information to make sure it is correct, and then
press MENU to save and return to the previous screen.
You must press the TIMER button on the VCR's remote
control before the programmed show starts in orderfor the feature to work correctly. Pressing the TIMER
button turns off the VCR and displays the timer
indicator on the VCR's front panel.
If you want to add another programmed recording to your
list, make sure the bullet (round circle) is highlighted in the
PROGRAM screen and use the arrow buttons to highlight thenext available field. Then, follow steps 1-8 to complete.
PROGRARCH DATE ON OFF $PD
• -- -/-- -:-- -:-- -
__ -/__ .:-- -:-- --i-- .:--
• -- -/-- -:-- -:-- -SELECT=(& • 4 _)
END=CMENU)
A finished program recording
(screen used is an example only).
_mer Program Tools
DTE]' _ -- -- -- -- _.
. ,LIL1.L1LIS PM
The timer Indicator will appear on the
VCR's display panel after you have
programmed a time and date to recordand pressed the TIMER button on the
remote control.
The VCR's remote
control timer button
Stopping a Timer Recording
To stop or cancel a timer recording in progress (even an
OTR recording):
Press and hold the POWER button on the VCR's front paneluntil the display shows STOR
Reviewing and Clearing Programs
To clear programs that you have already set up, simply go to thePROGRAM on-screen menu, highlight the bullet next to the
program you want to delete or change, then press the RESETbutton on the remote control. This clears all fields of the
program.
To create a new timer program, follow steps 1-8 under Timer
Recording.
22
Recording Broadcast Stereo or SAP
(Second Audio Program) TV Programs
Some TV programs are broadcast with stereo audio or SAP
(Second Audio Program).
1.
2.
3.
Turn on the TV and tune it to the VCR viewing channel
(either 3, 4, or TV's video input).
Insert a tape with safety tab in place.
If your VCR viewing channel is 3 or 4, make sure the VCR
indicator appears in the VCR's display panel. If not, pressTV°VCR to turn it on.
4. Use the SP.EP button on the remote to select a recording
speed. The tape speed indicator appears on the VCR's front
panel and on the TV screen (if this option is set using theINFO button on the remote control).
.
6.
Select the channel or line input to be recorded.
Set the audio reception using the AUDIO SEL button on the
remote control. Choose LR, L, or R for the type of audio youwant to record. See Other Features section for more
information.
7. Press REC/OTR to start recording.
8. Press STOP when you are finished.
Recording Audio Only
You can record audio only from another audio source connected
to the AUDIO IN (R and L) jacks on the front of the VCR.
1. Press the INPUT button on the remote to select the line
input (L appears on the VCR's front panel).
The VCR will record audio from the audio equipment
connected to the AUDIO IN jacks.
2. Use SP-EP on the remote control to select the recording
speed.
3. Start playing audio source and press REC (REC/OTR buttons
on the remote control) to begin recording.
4. Press STOP when you are finished.i
L
Line Input Channel Explained
If you have trouble understandingthe concept of the Line Input, see"How to Find Your TV's Video InputChannel" in the Reference section of
this manual or refer to your TV'sUser's Guide for more information.
Recording audio only will erase
anything that was previouslyrecorded on the tape.
Audio Connection
FRONT OF VCR
o,I 2I,,,.,Le o 9_ 9 e L I ,e,o_ve,.YouI .....%"° "°""1 d%"o= 'odo,
BACK OF AMPLIFIER / RECEIVER which does not
look the same,
23
Playing Back Audio Only
To get stereo sound, connect the AUDIO OUT jacks on the back
of the VCR to the appropriate input on your amplifier or receiver.
Do not use the phono input. Refer to your amplifier or receiver
user's guide.
Using Two VCRs for Copying and
Editing Tapes
Use one VCR as the playback VCR and the other as the
recording VCR.
1. Connect the VCRs using the diagram at the right.
2. Turn on both VCRs and "IV.
. Tune the TV to the VCR viewing channel (either 3, 4, or TV's
video input). (See, "How to Find Your VCR's Video Input
Signal," in the References section of this manual for moreinformation).
4. If you are using coaxial cables for the connection, tune
recording VCRto channel 3 or 4--the one selected on the
playback VCR.
If you are using audio/video cables, select the line input on
the recording VCR.
5. Insert the tape you want to copy into playback VCR. Insert a
blank tape with its safety tab in place into recording VCR.
6. Using visual search, locate the segment you want to copy on
the playback VCR. Pause the tape at this location.
7. Press RECORD on the recording VCR, then PAUSE.
8. Press PAUSE on both VCRs to begin copying.
9. Press PAUSE on both VCRs to stop copying.
10. Repeat steps 6-9 to copy or edit additional segments.
Caution:
The unauthorized recording ofsatellite broadcasts, television
programs, or other copyrightedmaterials may infringe on the rightsof others,
Two VCR Connection
CABLE BOX
ORANTENN_
pLAYBACK VGR
RECORDING VCR
NOTE: Thisisanexample of two
possible VCRs. You
may have differentmodels that do not
look the same.
m
4- OR--k
TO TV TO TV
24
Features to Enhance
VCR Operation
]]me Counter
On-Screen Displays
Audio Reception
• Audio Playback
V
V
V
V
15OTHERFEATURESV
V
25
Picture Search Options
The most basic way to search during playback is using the FWDor REV buttons on the remote control. This section contains other
options available for searching a tape.
Forward and Reverse Search
You can search a tape during playback. Sound is turned off
during picture search. Search works well for tapes recorded atboth SPor EPspeeds.
1, Press FWD to search forward or REV to search in reverse.
2. Press PLAY to return to normal playback.
Slow Motion
You can view a tape using slow motion or frame-by-frame action.
Slow motion and frame advance works well for tapes recorded atthe SP or EPspeeds.
For Frame Advance:
1. Press PLAY on the remote control to begin playback.
2. During playback, press PAUSE and then PLAY again tobegin single-frame playback.
For Slow Motion Playback:
1. Press PLAY to begin playback.
2. Press PAUSE to freeze playback.
3. Press PLAY repeatedly to advance the playback one frame ata time.
4. Press PAUSE again to return to normal playback. The VCR
switches automatically from slow-motion playback to stopafter a few minutes.
26
Tracking
Your VCR has automatic tracking which removes interference
like streaks or "snow" from the picture. Automatic tracking isactivated when you insert a tape or turn on the VCR.
Occasionally you may need to manually adjust tracking,
especially if the tape was recorded on a different VCR. Just
use the CHANNEL UP and DOWN buttons (AT) on the VCR's
front panel or remote control to reduce the distortion. By
pressing and holding either of the buttons, you should notice apoint when the picture becomes clearer. If it gets too much
distortion on the screen, use the opposite button to reverse the
amount of tracking until the picture is clear.
You can also use this tracking method when you pause a tape's
playback to reduce jittering of the picture.
When you manually adjust the picture, automatic tracking isturned off. To turn automatic tracking back on, eject the tapeand reinsert it. Tracking has no effect during recording--onlyplayback.
Time Counter
The time counter shows the actual time it takes to record a
program or play back a segment of a recorded tape. It helps
locate the beginning or end of programs you taped. The time
counter resets to 0:00:00 whenever the tape is ejected from
the VCR or the RESETbutton on the remote control is pressed.
For example, if you record a 30-minute program at thebeginning of the tape and you want to go to the end of
that program to begin another recording, you would:
1. Press INFO on the remote control until you see the timecounter on the TV screen.
2. Press RESET to reset the time counter to 0:00:00.
3. Press FWD to forward the tape until the time counterreads 0:30:00.
4. Press STOP. This is the approximate end of the 30-minute
program (You may want to press PLAY to verify). Now, youcan begin recording at this spot.
5, Press INFO twice to remove the time counter from the
screen and return to the normal display mode.
:30:00 •
HOURS X
MINUTES SECONDS
EP 26
Timer Counter on-screen display lists hours,
minutes and seconds of a segment of tape.
27
On-screen Displays
The INFO button shows the status of the VCR (STOP = I,
PLAY = ,, RECORD = e, etc.), channel number, time counter,
time, and tape speed on the TV screen. The date and time must
be set before they can be displayed.
1. Press INFO to see the on-screen displays.
2. Press INFO again to have only the time counter remainon the screen.
3. Press INFO again to have no displays appear on the
TV screen. This is useful for dubbing tapes.
Turning off the VCR also resets the displays.
Audio Setup Features
The audio setup features enhance your tape playback and
recordings. The features in this section are accessed by using theAUDIO SEL button on the remote control. In order to receive a
High Fidelity playback, you must use AN cables to connect your
VCR to your TV or Stereo (See the Connections section of thismanual for more information).
The VCR's default audio mode is stereo. This is reflected in both
the rQ[] appearing on the front panel's display.
1. Pressing the AUDIO SEL button changes the setting to monosound coming from the left channel (l'Q). This setting is fine
if your TV does not have stereo capabilities or if you do nothave A/V connections.
2.
3.
Pressing the AUDIO SEL button on the remote control againchanges the audio channel to right only (1_1).
Pressing the AUDIO SEL button again removes the audioinformation altogether.
:30:00 • EP 26
MINUTES SECONDS
On-screen disp_y (times ouO
_,_ 0:30:00
T#me counter only (does not time out)
)
No displays will appear
(useful for dubbing)
Select STEREO for normal or stereo broadcast TV recording.
Select MONO if the stereo signal is weak and the sound is
too noisy.
To receive Hi-Fi stereo sound, useaudio-video cables with a compatible
TV or receiver, Using only the RFOUT jack will not produce stereosound.
28
Reception
Some TV programs are broadcast with stereo audio or a
Second Audio Program (SAP) which offers a second language.
The reception feature lets you select the type of audio you wantto record.
Select SAP to record a Second Audio Program instead ofnormal audio on both the Hi-Fi and linear tracks.
1. To select the SAP mode, press MENU on the remote control
to display the VCR's main MENU.
MENU
PROGRAM
2.
PRESET
SELECT=(&• ENTER)
END=(NENU)
Use the Av arrow buttons on the remote control to highlight
the SET UP selection, then press the ENTER button.
SET UP
_ONmANTENNA _ MANU
LANGUAGE m FRA EEP
SELECT=(A•• _)
END=(MENU)
3. The SAP selection is already highlighted, so use the <_
arrow buttons to move the selection to ON, then press theMENU button to exit the menu.
29
Tape Playback
The VCR records the same audio on both Hi-Fi and linear tracks
on the tape. Hi-Fi sound is recorded on a separate left and rightstereo channels. Monaural sound is recorded on the linear track.
To enjoy Hi-Fi sound, connect your VCR to a stereo television or
amplifier/receiver using the audio/video jacks. The Tape Playback
feature lets you select which audio you use during playback.
With a normal stereo recording, switching the audio channels
with the remote button results in the following:
[] = left channel audio only
[] = right channel audio only
I'Cli_l= stereo audio
No channels selected = linear audio on both channels
With the SAP feature turned on in the menu system, switchingthe audio channels with the remote button results in the
following:
[] = linear audio on both channels
[] = SAP on both channels
[]IR1= linear audio on left channel and SAP on right channel
No channels selected = linear audio on both channels
30
Things to Know Before Connecting
Components
Protect Your Components from Power Surges
Connect all components before plugging any
power cords into the wall outlet.
Always turn off the TV and other components
before you connect or disconnect any cables.
¥
V
Position Cables Correctly to Avoid Audio Hum orInterference
Insert all cable plugs firmly into their jacks.
Place the audio/video cables to the sides of the TV's
back panel instead of straight down the middle
after you connect your components.
Try not to coil any twin-lead cables and keep them
away from the audio/video cables as much as
possible.
Make sure all antennas and cables are properly
grounded. Refer to the Safety tips sheet packed
with your unit.
Protect Your Components from Overheating
Do not block ventilation holes in any of the
components. Arrange the components so that aircan circulate freely.
Do not stack components.
Allow adequate ventilation when placing yourcomponents in a stand.
Place an amplifier or satellite receiver on the top
shelf of the stand so heated air rising from it willnot flow around other components.
V
¥
6
VCONNECTIONS
¥
31
Connecting Your VCR
Refer to these pages to help you connect your VCR.
Jacks and Cables
RF Jacks and Coaxial Cables (F-type)
The RFjacks provide good picture and mono sound quality, andmust be used if audio/video connections are not available for
your TV.
These jacks are required for antenna or cable-TV connections.
The RF jacks on the VCR are labeled ANT. IN and RF OUT. The
coaxial cable supplied with your VCR is used to connect the VCR's
RFOUT jack and your TV's antenna input.
Audio/Video Jacks and Cables (RCA-type)
The AUDIONIDI=O jacks provide very good picture quality and
Hi-Fi sound, and can be used if your TV has audio/video input
jacks. For more information about input channels, see page 45.
These jacks are used for most audio/video connections between
components. The VCR AUDIONIDEO jacks are color coded
(yellow for video and white for audio).
If your TV only has two inputs for audio (stereo), you may need a
Y-adapter to hear sound from both channels.
0RF Jack
0AudioNideo Jack
32
Choosing a VCR Connection
There are several different ways to connect your VCR, depending
on whether or not you have cable service, and if you have a cablebox, and whether some of the channels are scrambled, and
maybe you have a satellite receiver along with cable (but no
cable box), or a satellite receiver and no cable or... well, you get
the picture.
Five connections are described in this section and one of them
should provide you with a VCR connection that works.
• TVwith RFJack Only
• TVwith Audiofideo Jacks
• TV with Audio/Video Jacks and Cable Box to Unscramble
Pay Channels Only
If you need to connect additional components not shown in the
diagrams here (and are unsure of how to connect them), refer to
the instruction manual that came with that particular
component.
Advantages of Audio/Video CableConnections
Using a simple coaxial cable connection gives you good picturequality. If your television has audio/video jacks though, it is
highly recommended that you use them to get even better
picture quality and Hi-Fi stereo sound when recording and
playing back videotapes. These connections give you more
convenient operation by not having to share the TV's
antenna signal. For more information about AUDIO/VIDEO INPUT
see, "How to Find Your TV's Video Input Channel," in theReferences section of this manual.
33
TV with RFJack Only
This connection assumes:
You are connecting antenna, cable, or cable box system.
Your television has only an RF input jack.
This connection provides:
Mono sound playback from VCR.
Record one channel while watching another (exceptwhen using a cable box for all channels).
To use this connection, you must have:(1) coaxial cable for cable or antenna connection; (2) forcable box.
To connect:
1. Connect cables as shown.
2. Return to First Things First, then follow the steps.
Using This Connection
Tune your TV to channel 3 or 4, whichever one you selectedwith the 3 CH. 4 switch on the back of the VCR.
To play a tape:1. Insert a tape.
2. If necessary, press PLAY.
To record one program and watch another:
1. Begin recording a program using one of therecording features.
2. Press the TV.VCR button and select a different channelon the TV.
VCR
TV
CABLE, CABLE BOX, OR ANTENNA_
O
34
TV with Audio/Video Jacks
This connection assumes:
You are connecting an antenna, cable, or cable box system.
Your television has audio/video jacks.
This connection provides:
Hi-Fi stereo sound playback from VCR.
Record one channel while watching another (except when
using a cable box for all channels).
To use this connection, you must have:
(1) coaxial cable for cable/antenna connection; (2) forcable box.
(2) audio/video cables.
To connect:
1. Connect cables as shown.
2. Return to First Things First, then follow the steps.
Using This Connection
Tune your TV to its video input channel (see page 45 for moreinformation). Use of TV*VCR button is not required.
To play a tape:
1. Insert atape.
2. If necessary, press PLAY.
To record one program and watch another:
1. Begin recording a program using one of the
recording features.
2. Select a different channel on the TV.
VCR
TV
CABLE, CABLE BOX, OR ANTENNA_
35
TV with Audio/Video Jacks and Cable Box
to Unscramble Pay Channels Only
This connection assumes:
You are using a cable box only to unscramble premiumchannels.
Your TV has audio/video input jacks.
This connection provides:
Hi-Fi stereo sound playback from the VCR.
Recording a scrambled or unscrambled channel through thecable box while watching an unscrambled channel.
To use this connection, you must have:(3) coaxial cables
(2) audio/video cables
(1) splitter
To connect:
1. Connect cables as shown.
2. Return to First Things First, then follow the steps.
Using This Connection
Tune your TV to its video input channel (see page 45 for moreinformation). Use of TVoVCR button is not required.
To play a tape:
1. Insert a tape.
2. If necessary, press PLAY.
To record a scrambled or unscrambled program
and watch another unscrambled program:
1. Begin recording a scrambled or unscrambled programthrough the cable box using one of the recording features.
2. Select an unscrambled channel on the TV.
I AII scrambled channels must beviewed through the VCR.
CABLE BOX
VCR
36
This section gives you some additional information
about the VCR, including a description of the unit's
controls and displays.
You will also find the section, Troubleshooting Tips,
in this Appendix. These areas might help resolve some
of those simple problems.
Finally, this section of the manual also contains
your warranty information.
V
V
V
V
V
7V
REFERENCE L
37
Front Panel
\ -Remote Sensor
AUDIO (R and L mono) and VIDEO IN Jacks Receives signalsfrom another component, like a VCR or camcorder, when it is
connected to these jacks. Use INPUT on the remote to select "L"
to record from these jacks.
CHANNEL Up or Down Selects next higher or lower channel in
the VCR's channel memory. Adjusts tracking when a tape is
playing. Press both together to re-center tracking.
FWD Forwards the tape when the VCR is stopped. Searches the
picture forward during playback.
PLAY Plays a tape.
POWER Turns the VCR on or off.
RECORD Starts VCR recording.
Remote Sensor Receives signals from the remote control. Aimthe remote at this sensor.
REV Rewinds the tape when the VCR is stopped. Searches thepicture in reverse during playback.
STOP/EJECT Stops the normal functions such as record,
playback, rewind, fast-forward, or pause. Ejects the tape whenthe VCR is stopped.
38
Display Panel
•O0"OL-,'.SP PM
DT Appears when digital tracking is activated by the VCR.
TIME The current time appears. AM and PM indicators appearwith the time.
TIME COUNTER This shows the actual amount of time a
segment of a recorded tape has used. This counter helps locate
the beginning or end of programs taped.
REC INDICATOR ( • ) Lights when the VCR is recording, taking
the place of the clock on the VCR's display. A red circle appears in
the display and a circle appears on the VCR's on-screen display (if
this option is enabled).
TIMER INDICATOR ([_]) Lights during a timer recording or when
the VCR is set for a timer recording and the VCR is turned off.
VCR INDICATOR Determines the source of the picture (Applies
only if the VCR Viewing Channel is 3 or 4). Pressthe TVNCRbutton on the remote control to turn on or off.
• VCR Indicator on: Picture fromVCR.
• VCR Indicator off: Picture from the TV channel.
39
Back Panel
Auo_v,oEo OA_TIR-OOT L
CH.31CH.4 Switch Selects the channel to which you will tune
the TV to see the VCR picture if you connect the VCR using
one of the basic hookups (Does not apply if you use the A/V hook
ups to connect the VCR to the TV).
AUDIO (R and L) and VIDEO OUT Jacks Sends signals
from VCR to another component, like a TV or VCR, when
connected by these jacks with A/V cables.
ANT IN Jack Receives a signal from an antenna or cable
system when attached.
RF OUT Jack Passes the VCR's signal to %/using the coaxial
cable supplied.
40
Troubleshooting Tips
No power
Check to make surethe VCR is plugged into a working outlet.
Check to make sure your connections are correct.
VCR does not respond to remote
Check to make sure there are no objects between the VCR andremote.
The batteries may need changing.
Poor or no picture for normal TV viewing
Check to make sure the VCR indicator is off.
Check to make sure the TV is switched to an active channel.
Check to make sure the antenna connections are secure andcorrect.
Snowy or no picture during playbackPress TVNCR to turn VCR indicator on.
Check TV channel selected (3 or 4) to make sure it matches thechannel selected with 3 CH. 4 switch on back of VCR.
Check to make sure the TV's fine tuning is correct for the channelyou have selected.
Check video cable connections between VCR and TV monitor.
Check to make sure the "rv monitor is set to video input(see How to Find Your TV's Video Input Channel in this section formore information).
Try another tape.
Some snow/streaks are normal during search, stop action, frameadvance, and slow-motion playback.
Streaks in picture during normal playbackAdjust the tracking by using the • • buttons on the remote controlto move streaks up or down for the best picture.
Check to make sure the tape is of good quality and not worn out.
(Continued on Next Page)
41
Troubleshooting Tips (Cont.)
Time counter not working or time counter not working insearch modes
The time counter does not advance during unrecorded portions oftape. When an unrecorded segment of tape is encountered, thetime counter will hold its count until recorded material is detected
again.
A minus (-) will appear in front of the time if you rewind the tapefarther back than a counter reading of O:OO:OO.
The time counter disappears during search; this is normal.
Will not record or play
Check to make sure there is a tape in the VCR.
Try ejecting and reinserting the cassette.
Check to make sure the tape is not broken.
Check to make sure the VCR is not in pause mode. Press PAUSE orPLAY on the remote control to return to normal playback.
Rewind does not operate
Check to make sure the tape is not already rewound.
Will not record
Check to make sure the safety tab is intact.
Check to make sure the VCR is not in the line input mode. Press theINPUT SELECTbutton on the remote control.
Clock shows incorrect time or date
Power interruption, clock needs to be reset in the PRESET->CLOCKSET menu.
Check to make sure the clock is set accurately (check AM/PM and,date).
VCR makes noise when stopped
VCR is removing tape from heads. This is normal. The headcylinder inside the VCR will continue to rotate for a few minutesafter you put the VCR in the stop mode.
42
Troublesho oting Tips (Cont.)
Will not AUTO SCAN active channels correctlyCheck to make sure the antenna connections are secure andcorrect.
Check to make sure the Signal Type: TV/CATV feature is setcorrectly in the PRESET-> CH MEMORY menu.
Check to make sure the AUTO/MANU feature is set correctly in theSET UP-> ANTENNA menu.
If ANTENNA was set to AUTO in the SET UP menu, try using eitherCATV or TV setting in the PRESET-> CH MEMORY menu instead.
AUTO SCAN may not be necessary if using a cable box for allchannels. Contact your local cable company for more information.
Tape plays back in slow motionPress PLAY to return to normal playback.
Cannot select channels over 69
Cable channels over 69 can only be selected if the TV/CATV featurein the PRESET->CH MEMORY menu is setto CATV.
Cassette does not start to play automatically
Check to make sure that the safety tab is removed from the videocassette.
Time counter disappears during searching
This is normal
On-screen menus appear incorrectly in English, French, orSpanish.
Check LANGUAGE feature in the SET UP menu.
(Continued on Next Page)
43
Troubleshooting Tips (Cont.)
No stereo sound during playback
Check to make sure the TAPE PLAYBACK feature is set to EIl_l tohear stereo sound during playback. The tape you are playing mustbe recorded in stereo in order to use the Hi-Fi feature.
Must use the AUDIO/VIDEO OUT jacks on the back of the VCR tohear stereo sound.
Must be hooked to a component capable of playing stereo sound,
Stereo audio too noisy
Stereo signal is weak. Set audio reception to [] only.
Adjust the tracking by pressing the Channel up or down buttons(A T) to minimize the noise.
44
How to Find Your TV's
Video Input Channel
You need to tune your TV to the Video Input Channel if you are
using the VCR's Audio/Video OUT jacks to connect to the TV's
Audio/Video INPUT jacks instead of coaxial cable. You must select
this "channel" (also called LINE INPUT) before you can see the
VCR's menus, reception, or taped content. However, even though
your VCR's remote control has an INPUT SELECTbutton, this will
not control your TV. Instead, this button is used when another
component is connected to your VCR using the Audio/Video
INPUT jacks on the front panel (such as a camcorder).
The video input channel/LINE INPUT on televisions varies from
brand to brand and model to model. Ultimately, you should
consult the Owner's Manual from your TV, but some steps arelisted below which you can try first:
Press a button on the TV's remote control (see table below).
Selecting the channel from the TV's menu system(see table below).
Tune directly to the channel by selecting a specific number(see table below).
Go through all channels in the TV's channel list by pressing
the channel up or down buttons on the remote control or TV.
Some common scenarios are listed in the following table:
WARNING: Your VCR's INPUT
Button will not find your TV'$VIDEO INPUT channel.
Common Scenarios for
Video Input Channel Variations
Button/Switch Button on the Channel
on the "rv TV Remote Number
VIDEO VID 1 O0
SIGNAL LINE 90
VlD 1 VID 91
VID 2 VIDEO 92
S-VlD S-VlD 93
S-VIDEO INPUT VID 1
S-VIDEO VID 2
SOURCE
AUX
The VCR's Remote Control INPUT
SELECT Button
The VCR's remote control INPUT SELECTbutton finds the VIDEO INPUT channel of
your VCR, not your TV. This button isusedwhen something is plugged intothe VCR's A/V IN jacks on the front panelsuchas a camcorder.
45
Specifications
Format:
Record/Playback
System:
Video Signal System:
Antenna:
Tuner:
l_pe:
Power Requirement:
Power Consumption:
Dimensions:
Weight:
Storage Temperature
Range:
Operating
Temperature Range:
VHS
Video: 4-head
Audio: Hi-Fi stereo record/playback
system
EIA standard: NTSC color
75-ohm external VHF/UHF combinedantenna terminal
USA: 181 channels capability*
(125 cable channels)
Canada: 178 channels capability*
(122 cable channels)
Auto Programming frequency
synthesis
120V AC, 60 Hz
15 watts
3.54 inches high (90 mm)
14.57 inches wide (370 ram)
10.63 inches deep (270 mm)
6.4 pounds (2.9 kg)
- 22°F to +149°F
(-30°C to +65°C)
+41°F to +104°F
(+5°C to +40°C)
*Check your cable company's compatibility requirements.
Cleaning the VCR
Use a soft cloth or dusting attachment of your vacuum cleaner to
dust your VCR. Remove dust from the ventilation holes on the
top, back, sides, and bottom of the cabinet.
Plastic surfaces are easily scratched and can be marred by alcoholand various solvents. Avoid excessive use of oil-based furniture
polishes since the materials used in the cabinet will accumulate
more dust. We recommend using a nonabrasive, antistatic
cleaner and polisher. I pecifications are subject to changewithout notification.
46
Limited Warranty
What your warranty covers:Any defect in materials or workmanship.
For how long after your purchase:
Ninety days for labor charges.
One year for parts.
The warranty period for rental units begins with the first rental or 45 days from date of shipment to the rentat firm,whichever comes first.
What we will do:
Pay any Authorized RCAVCR Service Center the labor charges to repair your VCR.
Pay any Authorized RCA VCR Service Center for the new or, at our option, refurbished replacement parts required torepair your VCR.
How you get service:
Take your VCR to any Authorized RCA VCR Service Center. To identify your nearest Authorized RCA VCR ServiceCenter, ask your dealer, look in the Yellow Pages, or call 1-800-336-1900.
Show the Authorized Service Center Representative your evidence or purchase date or first rental.
Pick up your VCR when repairs are completed.
What your warranty does not cover:
Customer instruction. (Your Owner's Manual clearly describes how to install, adjust, and operate your VCR. Anyadditional information should be obtained from your Dealer.)
Installation and related adjustments.
Signal reception problems not caused by your VCR.
Damage from misuse or neglect.
Cleaning of video/audio heads.
Batteries.
A VCR that has been modified or incorporated into other products or is used for institutional or other commercial
purposes.
A VCR purchased or serviced outside the USA.
Acts of God, such as but not limited to lightning damage.
Product Registration:Please complete and mail the Product Registration Card packed with your VCR. It will make it easier to contact youshould it ever be necessary. The return of the card is not required for warranty coverage.
How state law relates to this warranty:
This warranty gives you specific legal rightsand you also may have other rights that vary from state to state.
If you purchased your VCR outside the United States:
This warranty does not apply. Contact your dealer for warranty information.
47
A
AN IN Jacks 38
AN Jacks 38
AN jacks 40ANT IN Jack 40
Audio Hum 31
Audio Only Recording
Playback 24AUDIO SEL 16
Audio Setup Features 28
Reception 29
AudioNideo CableConnections 33
Advantages 33
Audio/Video Jacks 35, 36TV Connection 35, 36
Auto Scan 10
Automatic Rewind 18
Automatic Tracking 17
BBack Panel 40
AN OUT Jacks 40
ANT IN jack 40
CH.3/CH.4 Switch 40
RF OUT jack 40Basics 15
Batteries 4
Broadcast Stereo 23
CCable Box 36
Cable TV Setup 9Cables 31
Positioning Correctly 31
Care and Cleaning i2Cautions i
CH.3/CH.4 Switch 40
CHANNEL Up or downbuttons 16
CHANNEL Up or Down 38
Channels List 10
Cleaning the VCR 46CLK/CNTR button 16
Connecting Components31
Things to Know 31Connections 31
Copying and Editing Tapes24
Display Panel 39REC Indicator 39
Time Indicator 39
]3me Counter Display 39Timer Indicator 39
VCR Indicator 39
I=EJECT button 16
ENTER button 16
FFirst Things First 3Forward Search 26
Frame Advance 26
Front Panel
AN Jacks 38
Channel Up/Down 38FWD 38
Play Button 38Power Button 38
REC button 38
Remote Sensor 38
REW 38
Speed Indicator 38
Stop/Eject Button 38
Front Panel Diagram 38FWD 38
FWD button 16
Index 48
INFO button 16
Initial Setup 5INPUT SELECT button
Interference 31
16
JJacks and Cables 32
Audio/Video Jacks and
Cables (RCA-type) 32RF Jacks and Coaxial
Cables (F-type) 32
/
Language Selection 8
MMain Menu 6
MENU button 16
Menus
Accessing 6
Cable TV Setup 9
Language Selection 8
Second Audio Program13
Time and Date 12
Using to Set Up Features8
VCR Channels List 10
N
Numbers (0 through 9,100) buttons 16
O
On-screen Displays 28On-screen Guide 7
On-Screen Menus 8
48
Other Features
Enhancing Operation 25
OTR Recording 20
Overheating 31
PPAUSE button 16
Picture Search Options 26Forward and Reverse
Search 26
Slow Motion 26
PLAY 38
PLAY button 16
POWER 38
POWER button 16
Power Surges 31
Product Registration i
Protecting Components 31
RREC 38
REC/OTR button 16
Recording 18, 19
Audio Only 23
Recording Features 20
OTR Recording 20
Timer Recording 21
Recording Options 19Reference 37Remote Control
Buttons 16
Install Batteries 4
Remote control 4
Remote Sensor 38
REV,button 16Reverse Search 26
REW 38
RF Jack
TV Connection 34
RF Jacks and Coaxial
Cables (F-type) 32RF OUT Jack 40
S
Safety Information iSAP (Second Audio Pro-
gram) 23
Second Audio Program 13
Second Audio Program
(SAP) 23
Selecting Channels 10Setting Up the VCR 7
Setup Features 7SHIFT button 17
SLOW button 17
Slow Motion 26
Specifications 46SPEED button 17
STOP button 17
STOP/EJECT 38
T
Tape
Ejecting 18
Recording 18
Safety Tab 18Tape Playback 30
Tapes
Playing 17Time and Date 12
Setting 12Time Counter 27
TIMER button 17
Timer Program Tools 22
Timer Recording 21
Timer Recordings
Reviewing and Clearing
Programs 22
Stopping 22
Tracking 27
Troubleshooting Tips41, 42, 43, 44
TV
Tuning 5TVNCR button 17
VVCR
Choosing a Connection33
Cleaning 46
Connecting 4Jacks and Cables 32
Plugging in 4Turning On 5
Viewing Channel 5VCR Basics 15
VCR Channels List 10
Adding or RemovingChannels 11
Auto Scan 10
Channel Search 10
Video Input Channel 9, 45
W
Warranty 47
49
If your VCR needs service, please contact your dealer or the
nearest Service Center from the yellow pages. Please do not
send any products to the Indianapolis address listed in thismanual or on the carton. This will only add delays in service
for your product.
THOMSON CONSUMER ELECTRONICS10330 North Meridian Street
Indianapolis, IN 46290
01999 Thomson Consumer Electronics, Inc.Trademark(s)® RegisteredMarca(s) Registrada(s)Printed in SingaporeTOGOM 1547128A
288E8961
top related