wastewater treatment for meat processing facilities€¦ · wastewater produced by commercial meat...
Post on 10-Aug-2020
8 Views
Preview:
TRANSCRIPT
1.800.420.4056newterra.com
Customer Need Wastewater produced by commercial meat processing facilities is high in BOD (biochemical oxygen demand). ■ Operations discharging to municipal sewers can face costly levies due to capacity
limitations at the municipal treatment plant or for exceeding increasingly stringent discharge parameters.
■ Facilities without access to municipal treatment must meet higher environmental standards for surface or subsurface discharge.
■ Septic systems and other rudimentary treatment systems require large subsurface beds, consuming valuable land that could be sold as additional sites
■ Connection costs to municipal collection systems may not be available or prohibitively expensive
■ Subsurface beds will eventually foul and need to be replaced/rebuilt, which is extremely costly
■ Septic Systems and other rudimentary treatment systems negatively impact the environment as opposed to Newterra’s advanced treatment
The Newterra Solution Newterra designs and manufactures modular, membrane bioreactor (MBR) wastewater treatment systems that are effective for the high BOD wastewater of food and beverage processors. Treated ef� uent delivered by Newterra systems meets regulatory requirements for a wide range of discharge options and water reuse applications. When required, Dissolved Air Flotation (DAF) pretreatment can be incorporated to reduce fats, oil and grease (FOG) and total suspended solids (TSS).
Differentiation Newterra systems: ■ are very compact, requiring minimal land and allowing additional sites to be located on
former subsurface beds ■ offer the � exibility to be con� gured as fully self-contained units including tankage, or as
hybrids that combine prefabricated elements with inground tanks ■ scalable and can be designed to allow for additional treatment units to be incorporated as
they’re required ■ are equipped with odor control and noise attenuation, so systems can be located in close
proximity to residents ■ offer high quality treated ef� uent that meets the most stringent environmental standards
for reuse, direct surface or subsurface discharge ■ are built to high standards as permanent assets with simpli� ed maintenance requirements ■ can operate in extreme conditions from -30ºC to +40ºC ■ are designed with the convenience of remote monitoring and system control by Newterra or
by your own operators ■ are built with the operators in mind as packaged treatment facilities; not just enclosures
for equipment
Newterra Offers Scalable, Cost-Effective SystemsFor Treating High BOD Wastewater
Wastewater Treatmentfor Meat Processing Facilities
Newterra Value Proposition
• Compact footprint• No odor • Scalable• More discharge options• Sound attenuation• Packaged facility• Operator-friendly• Reuse-ready ef� uent
1.800.420.4056 | newterra.com Newterra and the Newterra logo are trademarks or registered trademarks of Newterra, Ltd. or its af� liates in the U.S. and other countries. Copyright © 2020. Newterra, Ltd. Speci� cation are subject to change without notice. 05-2020
Membrane Bioreactor (MBR) SystemCompact Wastewater Treatment For Meat Processing Facilities
Speci� cations – Flexible Building Block Designs
Constituent Typical Ef� uent
BOD5 <2.0 mg/L
TSS <1.0 mg/L
NH3-N <0.5 mg/L
TP <0.05 mg/L
TN <3.0 mg/L
Turbidity <0.5 NTU
ExceptionalEf� uent Quality
System Name Enclosure Tankage Capacity GPD Capacity m3/Day
N-MBR 7 8’ x 20’ Incl: Internal 1,800 7
N-MBR 12 8’ x 40’ Incl: Internal 3,200 12
N-MBR 50 16’ x 40’ Incl: Internal 13,200 50
N-MBR 100 24’ x 40’ Incl: Internal 26,400 100
N-MBR 125 8’ x 120’ Incl: Internal 33,000 125
N-MBR 250 16’ x 40’ Engineered 66,000 225
N-MBR 500 16’ x 40’ Engineered 135,000 500
N-MBR 750 32’ x 40’ Engineered 200,000 750
N-MBR 1600 Custom Engineered 420,000 1600
N-MBR 3200 Custom Engineered 850,000 3200
N-MBR - Cust Custom Engineered >850,000 >3200
Accommodates WideFlow Variations
■ Engineered Tankage may be containerized, in-ground (concrete or � berglass) or above ground bolted steel or other and is custom con� gured for the application
■ Enclosure sizes do not include tankage if tankage is noted as Engineered■ Con� guration may vary depending on: – Redundancy Requirements – Variability in � ows or seasonality (turndown) – In� uent strength – Outlet criteria, especially P and TN – Climate conditions■ Sludge treatment options available and can be built in to system■ Pre-Treatment Options such as DAF or Clari� cation■ Enclosures can be � nished to match customer speci� cation■ newtN SCADA system for data acquisition, offsite control, alarm monitoring
and more
40
35
Actual Treated Flow
Design Flow
Trea
ted
Flow
(m3 )
Actual System Performance
45
50
20
15
30
25
5
0
10
Day 1 Day 2 Day 3 Day 4 Day 5 Day 6 Day 7 Day 8 Day 9 Day 10 Day 11 Day 12 Day 13
Systems can becustom cladded
to suit environment
Optional Rubber Membrane Roo� ng
Operators perform routinemaintenance on the inside
top related