we use advanced cnc equipment to process, perfect testing ... · we use advanced cnc equipment to...
Post on 25-Jul-2020
3 Views
Preview:
TRANSCRIPT
We use advanced CNC equipment to process, perfect testing methods and develop mold design
independently. We choose low pressure casting, gravity casting, sand mold casting and kinds of
casting process.
We also have a full set of casting equipments, produce a large variety of cylinder blocks and
cylinder heads. We can assemble variety models of aluminum alloy complete cylinder head and
cast iron alloy complete cylinder head.
We have the assembly workshop, with a complete cylinder head assembly production line and a
full set of components testing equipment, cylinder head water leak tester, cylinder air tightness
detection station, spring pull and press machine, partial pendulum instruments.
CAREFUL
DETECTION
PRECISIO
MACHINING
CLEAN
CASTING
FITTING
DETECTION
LEAKAGE
TESTING
STRONG
PACKAGESTRONG
PALLET
PRODUCT
COMPARISON
1)Inlet valve 40mm, 2)Exhaust valve 34mm 3)Valve's height 136.5 mm. 4)The deepth of valve seat insert is 0.8mm 5)Prechamber is rectangle shape
1)Inlet valve 40mm, 2)Exhaust valve 34mm 3)Valve’s height 130 mm. 4)Prechamber is crescent shape
1)Inlet valve 42mm, 2)Exhaust valve 36mm 3)Valve’s height 136mm. 4)Prechamber is rectangle shape
1)Inlet valve 40mm, 2)Exhaust valve 34mm 3)Valve’s height 136 mm. 4)The deepth of valve seat insert is 3.3mm5)Prechamber is rectangle shape
HCS No:130014406 HCS No:130014405
HCS No:130014407 HCS No:130014408
1)Inlet valve 40mm, 2)Exhaust valve 34mm 3)Valve’s height 132.6 mm. 4)Prechamber is rectangle shape
HCS No:130014409
THE CYLINDER HEAD DIFFERENT OF 4D56 (D4BH)
The strong package is better to protect cylinder head ,if it is not strong, it is easy to break product.
OUR PRODUCT ANOTHER FACTORY PRODUCT
STRONG
CLAEN
EXCT
FLAT
top related