welding machines - cut-n-welddc inverter mma welder. the flama maxiarc 200lt is a dc inverter mma...
Post on 18-Mar-2021
3 Views
Preview:
TRANSCRIPT
WELDING MACHINES
Flama MMA (Manual Metal Arc) Electrode Inverter Welders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Flama MIG (Metal Inert Gas) Inverter Welders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Flama TIG (Tungsten Inert Gas) Inverter Welders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Flama Plasma Cutting Inverters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
INDEX
2
FLAMA ARC 120EDC INVERTER MMA WELDERThis DC MMA welder has a soft, stable arc enabling easy welding and high quality welds . The machine is robust, tested to 440V and generator friendly .
EXTRA FUNCTIONSBuilt-in anti-sticking device to prevent overload and ease the electrode removal from the workpiece .
PROTECTIONFully protected against over-voltage under-voltage and over-heat .
WEIGHTExtremely low weight and versatile .
GENERATOR FRIENDLYDesigned to work with diesel generators and to avoid failures due to voltage spikes .
ACCESSORIESComplete with electrode holder and earth-clamp cable kits .
PART No. ARC120E
MODEL ARC 120E
POWER SUPPLY VOLTAGE V 160-275
FREQUENCY HZ 50
RATED INPUT POWER KW 4
DUTY CYCLE 40ºC 10 MIN 30% 125A / 100% 80A
NO LOAD VOLTAGE V 60
WELDING CURRENT RANGE A 10 – 125
NET WEIGHT KG 3
DIMENSIONS mm 210 x 125 x 170
ELECTRODE DIAMETER v 1 .6 – v 4 .0
ELECTRODE TYPE 6013, 7018 etc
POWER FACTOR 0 .65
EFFICIENCY % ≥80
COOLING AF
INSULATION CLASS H
PROTECTION CLASS IP23
SPECIFICATIONS
P
Input Voltage
Wide Input Voltage Range
440V Tested in production
Moisture ProofSalt Spray ProofCorrosion Proof
Generator Friendly
3
MMA
MMAFLAMA MINIARC 200DC INVERTER MMA WELDER
EXTRA FUNCTIONS‘Hot Start’ and ‘Arc Force’ built in .
PROTECTIONEquipped with temperature, voltage and current sensors for high protection .
DIGITAL DISPLAYVariable amperage control with digital meter, for a simultaneous welding current display .
WEIGHTExtremely low weight and versatile .
GENERATOR FRIENDLYDesigned to work with diesel generators and to avoid failures due to voltage spikes .
ACCESSORIESThe machine is complete with earth-clamp and electrode holder cable kits . An optional TIG torch can be added to the package for TIG welding of all kinds of standard metals such as mild steel, stainless steel, bronze, etcetera .
SPECIFICATIONS
PART No. MIN200
MODEL MINIARC 200
POWER SUPPLY VOLTAGE V 220 ±10% Single Phase
FREQUENCY HZ 50
RATED INPUT POWER KW 6 .6
DUTY CYCLE 40ºC 10 MIN 15% 200A / 100% 125A
NO LOAD VOLTAGE V 63
WELDING CURRENT RANGE A 10 – 200
NET WEIGHT KG 4 .8
DIMENSIONS mm 305 x 114 x 208
ELECTRODE DIAMETER v 1 .6 – v 4 .0
ELECTRODE TYPE 6013, 7018 etc
POWER FACTOR 0 .75
EFFICIENCY % ≥85
COOLING AF
INSULATION CLASS H
PROTECTION CLASS IP23
P
Input Voltage
440V Tested in production
Generator Friendly
High Duty Cycle
The Flama Miniarc 200 is a DC Inverter MMA Welder . It is a 220V, single phased machine and is designed for the professional welder . The welder has a soft, stable arc enabling easy welding and high quality welds . A digital display facilitates simple amperage setting and machine operation . The machine is robust, tested to 440V, generator friendly and designed for demanding industrial applications .
4
MMA
PART No. MAX200LT
MODEL MAXIARC 200LT
POWER SUPPLY VOLTAGE V 220 ±10% Single Phase
FREQUENCY HZ 50
RATED INPUT POWER KW 6 .5
RATED INPUT CURRENT A 46
DUTY CYCLE 40ºC 10 MIN 60% 200A / 100% 170A
NO LOAD VOLTAGE V 68
WELDING CURRENT RANGE A 10 – 200
NET WEIGHT KG 6 .2
DIMENSIONS mm 370 x 146 x 278
ELECTRODE DIAMETER v 1 .6 – v 5 .0
ELECTRODE TYPE 6013, 7018 etc
POWER FACTOR 0 .70
EFFICIENCY % ≥85
COOLING AF
INSULATION CLASS H
PROTECTION CLASS IP23
SPECIFICATIONS
P
EXTRA FUNCTIONS‘Hot Start’, ‘Anti-sticking’ and ‘Arc Force’ built in .
PROTECTIONEquipped with temperature, voltage and current sensors for high protection .
DIGITAL DISPLAYVariable amperage control with digital meter, for a simultaneous welding current display .
WEIGHTExtremely low weight and versatile .
GENERATOR FRIENDLY Designed to work with diesel generators and to avoid failures due to voltage spikes .
ACCESSORIESThe machine is complete with earth-clamp and electrode holder cable kits . An optional TIG torch can be added to the package for TIG welding of all kinds of standard metals such as mild steel, stainless steel, bronze, etc
Input Voltage
440V Tested in production
Generator Friendly
High Duty Cycle
FLAMA MAXIARC 200LTDC INVERTER MMA WELDERThe Flama Maxiarc 200LT is a DC Inverter MMA Welder . It is a 220V, single phase machine and is designed for the professional welder . The cable kits are heavy duty . The welder has a soft, stable arc enabling easy welding and high quality welds . A digital display facilitates simple amperage setting and machine operation . The machine is robust, tested to 440V, generator friendly and designed for demanding industrial applications . The welder has robust machine plugs and sockets for heavy duty cable and a built in VRD (Voltage Reduction Device) for additional welder safety, especially in a damp environment
5
6
FLAMA MAXIARC 400DC INVERTER MMA WELDERThe Flama Maxiarc 400LT is a DC Inverter MMA Welder . It is a 380V, three phase machine and is designed for the professional welder . The machine can weld with cellulosic electrodes . The unit has PLP (Phase Loss Protection) and a high duty cycle . The welder has a soft, stable arc enabling easy welding and high quality welds . A digital display facilitates simple amperage setting and machine operation . The machine is robust, tested to 550V, generator friendly and designed for demanding industrial applications . The welder has robust machine plugs and sockets for heavy duty cable and a built in VRD (Voltage Reduction Device) for additional welder safety, especially in a damp environment .
PART No. ARC400LT
MODEL MAXIARC 400LT CEL
POWER SUPPLY VOLTAGE V 380 ±10% Three Phase
FREQUENCY HZ 50
RATED INPUT POWER KW 16 .0
RATED INPUT CURRENT A 30
DUTY CYCLE 40ºC 10 MIN 60% 400A / 100% 325A
NO LOAD VOLTAGE V 90
WELDING CURRENT RANGE A 20 – 400
POWER FACTOR 0 .70
NET WEIGHT KG 19
DIMENSIONS mm 485 x 240 x 445
ELECTRODE DIAMETER v 1 .6 – v 6 .0
ELECTRODE TYPE 6013, 7018 etc
COOLING AF
EFFICIENCY % ≥90%
INSULATION CLASS H
PROTECTION CLASS IP23
SPECIFICATIONS
MMA
EXTRA FUNCTIONS‘Hot Start’ and ‘Arc Force’ adjustable: VRD selectable; ‘Anti-sticking’ built in .
PROTECTIONEquipped with temperature, voltage and current sensors for high protection .
DIGITAL DISPLAYVariable amperage control with digital meter, for a simultaneous welding current display .
ACCESSORIESThe machine is complete with earth-clamp and electrode holder cable kits . An optional TIG torch can be added to the package for TIG welding of all kinds of standard metals such as mild steel, stainless steel, bronze, etc
P
Highduty cycle
VoltageReductionDevice
Phase LossProtection
550V Testedin production
Cellulosicelectrode
Input Voltage
IGBT Module
MCU controlsystem
Generator friendly
6
8
FLAMA MIG 200EDC INVERTER MIG WELDER
SPOOLCapable of loading up to 5 kg spool .
PROTECTIONEquipped with temperature, voltage and current sensors for high protection .
ACCESSORIESThe machine is complete with a MIG torch, argon flow meter and a earth clamp cable kit.
PART No. MIG-200
MODEL MIG 200E
POWER SUPPLY VOLTAGE V 220 ±10% Single Phase
FREQUENCY HZ 50
RATED INPUT POWER KW 5 .7
RATED INPUT CURRENT A 34 .5
DUTY CYCLE 40ºC 10 MIN 30% 200A / 100% 120A
NO LOAD VOLTAGE V 42
WELDING CURRENT RANGE A 50 – 200
WELDING VOLTAGE RANGE V 13 .5 – 24
POWER FACTOR 0 .75
WIRE DIAMETER mm Fe: 0 .6 to 1 .0 Ss: 0 .8 to 1 .0 Flux-cored: 0 .6 to 1 .0
NET WEIGHT KG 9
DIMENSIONS mm 410 x 198 x 340
COOLING AF
EFFICIENCY % 85
INSULATION CLASS H
PROTECTION CLASS IP23
SPECIFICATIONS
MIGThe Flama MIG 200E is a DC Inverter MIG Welder . It is a 220V, single phase machine and is designed for the professional welder . The machine is durable, generator friendly and tested to 440V . The machine can accommodate 1kg and 5kg spools of wire . The welder has a soft, stable arc enabling easy welding and high quality welds . A digital display facilitates simple amperage setting and machine operation . The machine is robust, tested to 440V, generator friendly and designed for demanding industrial applications .
P
Input Voltage
Wide Input Voltage Range
440V Tested in production
Moisture ProofSalt Spray ProofCorrosion Proof
Generator Friendly
7
PART No. MIG-250
MODEL MIG 250-1
POWER SUPPLY VOLTAGE V 220 ±10% Single Phase
FREQUENCY HZ 50
RATED INPUT POWER KW 7 .3
RATED INPUT CURRENT A 50
DUTY CYCLE 40ºC 10 MIN 60% 250A / 100% 200A
NO LOAD VOLTAGE V 47
WELDING CURRENT RANGE A 50 – 250
WELDING VOLTAGE RANGE V 13 .5 – 26 .5
POWER FACTOR 0 .7
WIRE DIAMETER mm Fe: 0 .6 to 1 .2 Ss: 0 .8 to 1 .2 Flux-cored: 0 .6 to 1 .2
NET WEIGHT KG 23
DIMENSIONS mm 618 x 240 x 445
EFFICIENCY % 85
COOLING AF
INSULATION CLASS H
PROTECTION CLASS IP23
SPECIFICATIONS
FLAMA MIG 250-1 DC INVERTER MIG WELDERThe Flama MIG 250-1 is a DC Inverter MIG Welder . It is a 220V, single phase machine and is designed for the professional welder . The machine can accommodate up to 20kg spools of wire . The welder has a soft, stable arc enabling easy welding and high quality welds . A digital display facilitates simpleamperage setting and machine operation . The machine is robust, tested to 440V, generator friendly and designed for demanding industrial applications . The machine has waveform control for added stability of the arc even at low current .
MIG
v 300 mm (20 kg)
HighDuty Cycle
Input Voltage
Generator Friendly
Input Voltage
ARC STABILITYWaveform control for added stability of the arc even at low current .
PROTECTIONEquipped with temperature, voltage and current sensors for high protection .
BIG SPOOLCapable of loading up to 20 kg spool .
ACCESSORIESThe machine is complete with a MIG torch, argon flow meter and a earth clamp cable kit.
8
ARC STABILITYWaveform control for added stability of the arc even at low current .
PROTECTIONEquipped with temperature, voltage and current sensors for high protection .
BIG SPOOLCapable of loading up to 20 kg spool .
ACCESSORIESThe machine is complete with a MIG torch, argon flow meter and a earth clamp cable kit.
PART No. MIG-350
MODEL MIG 350
POWER SUPPLY VOLTAGE V 380 ±10% Three Phase
FREQUENCY HZ 50
RATED INPUT POWER KW 11
RATED INPUT CURRENT A 23
DUTY CYCLE 40ºC 10 MIN 40% 315A / 100% 200A
NO LOAD VOLTAGE V 53
WELDING CURRENT RANGE A 50 – 350
WELDING VOLTAGE RANGE V 13 .5 – 30
POWER FACTOR 0 .72
WIRE DIAMETER mm Fe: 0 .6 to 1 .2 Ss: 0 .8 to 1 .2 Flux-cored: 0 .6 to1 .2
NET WEIGHT KG 25
DIMENSIONS mm 618 x 240 x 445
EFFICIENCY % 85
COOLING AF
INSULATION CLASS H
PROTECTION CLASS IP23
SPECIFICATIONS
FLAMA MIG 350DC INVERTER MIG WELDERThe Flama MIG 350 is a DC Inverter MIG Welder . It is a 380V, three phase machine and is designed for the professional welder . The machine can accommodate up to 20kg spools of wire . The unit has PLP (Phase Loss Protection) . The welder has a soft, stable arc enabling easy welding and high quality welds . A digital display facilitates simple amperage setting and machine operation . The machine is robust, tested to 550V, generator friendly and designed for demanding industrial applications . The machine has waveform control for added stability of the arc even at low current . The unit is fitted with a robust 4 roll wire-feeder .
MIG
4 Rolls Wire Feeder
v 300 mm (20 kg)
HighDuty Cycle
Input Voltage
Phase LossProtection
Generator Friendly
9
ARC STABILITYWaveform control for added stability of the arc even at low current .
DIGITAL DISPLAYVariable amperage control with digital meter, for a simultaneous welding current display .
PROTECTIONEquipped with temperature, voltage and current sensors for high protection .
ACCESSORIESThe machine is complete with a MIG torch, argon flow meter, trolley and a earth clamp cable kit. An optional water cooling unit can be added .
FLAMA MIG 350FDC INVERTER MIG WELDER
P
v 300 mm (20 kg)
HighDuty Cycle
IGBTModule
550V Tested in production
The Flama MIG 350F is a DC Inverter MIG Welder . It is a 380V, three phase machine and is designed for the professional welder . The machine has a high duty cycle and PLP (Phase Loss Protection) . The welder has a soft, stable arc enabling easy welding and high quality welds . A digital display facilitates simple amperage setting and machine operation . The machine is robust, tested to 550V, generator friendly and designed for demanding industrial applications . The machine has waveform control for added stability of the arc even at low current . The unit is fitted with a robust 4 roll wire-feeder .
MIG
PART No. MIG 350F
MODEL MIG 350F
POWER SUPPLY VOLTAGE V 380 ±10% Three Phase
FREQUENCY HZ 50
RATED INPUT POWER KW 13 .5
RATED INPUT CURRENT A 28
DUTY CYCLE 40ºC 10 MIN 60% 350A / 100% 275A
NO LOAD VOLTAGE V 56
WELDING CURRENT RANGE A 50 – 350
WELDING VOLTAGE RANGE V 13 .5 – 40
EFFICIENCY % 85
WIRE DIAMETER mm Fe: 0 .6 to 1.2 Ss: 0 .8 to 1 .2 Flux-cored: 0 .6 to 1 .2
NET WEIGHT KG 21
DIMENSIONS mm 555 x 240 x 445
POWER FACTOR 0 .7
COOLING AF
INSULATION CLASS H
PROTECTION CLASS IP23
SPECIFICATIONS
Phase LossProtection
Input Voltage
Generator Friendly
10
Water cooler displayedis an optional extra.
ARC STABILITYWaveform control for added stability of the arc even at low current .
DIGITAL DISPLAYVariable amperage control with digital meter, for a simultaneous welding current display .
PROTECTIONEquipped with temperature, voltage and current sensors for high protection .
ACCESSORIESThe machine is complete with a MIG torch, argon flow meter, trolley and a earth clamp cable kit. An optional water cooling unit can be added.
FLAMA MIG 500FDC INVERTER MIG WELDER
PART No. MIG 500F
MODEL MIG 500F
POWER SUPPLY VOLTAGE V 380 ±10% Three Phase
FREQUENCY HZ 50
RATED INPUT POWER KW 26
RATED INPUT CURRENT A 41
DUTY CYCLE 40ºC 10 MIN 60% 500A / 100% 390A
NO LOAD VOLTAGE V 90
WELDING CURRENT RANGE A 35 – 500
WELDING VOLTAGE RANGE V 13 .5 – 50
EFFICIENCY % 85
WIRE DIAMETER mm Fe: 0 .6 to 1 .6 Ss: 0 .8 to 1 .6 Flux-cored: 0 .6 to 1 .6
NET WEIGHT KG 30
DIMENSIONS mm 555 x 240 x 445
POWER FACTOR 0 .95
COOLING AF
INSULATION CLASS H
PROTECTION CLASS IP23
SPECIFICATIONSP
v 300 mm (20 kg)
HighDuty Cycle
IGBTModule
550V Tested in production
Phase LossProtection
Input Voltage
Generator Friendly
The Flama MIG 500F is a DC Inverter MIG Welder . It is a 380V, three phase machine and is designed for the professional welder . The machine has a high duty cycle and PLP (Phase Loss Protection) . The welder has a soft, stable arc enabling easy welding and high quality welds . A digital display facilitates simple amperage setting and machine operation . The machine is robust, tested to 550V, generator friendly and designed for demanding industrial applications . The machine has waveform control for added stability of the arc even at low current . The unit is fitted with a robust 4 roll wire-feeder .
MIG
11
Water cooler displayedis an optional extra.
FLAMA MIG 500F DUAL PULSEDC INVERTER MIG WELDERThe Flama MULTIMIG 500F DUAL PULSE is a Synergic DC Inverter Welder . It is a 380V, three phase machine and is designed for the professional welder . The machine is durable, generator friendly and tested to 550V . The machine has a high duty cycle and PLP (Phase Loss Protection) . The welder has a soft, stable arc enabling easy welding and high quality welds . A digital display facilitates simple amperage setting and machine operation . The machine has waveform control for added stability of the arc even at low current . The Dual Pulse function allows for devoted pulse curves for high quality welding of aluminium, mild steel, stainless steel and silicon bronze materials . The unit is fitted with a robust 4 roll wire-feeder .
SPECIFICATIONS
PART No. MIG-500F-DP
MODEL MIG 500F Dual Pulse
POWER SUPPLY VOLTAGE V 380 + 10% Three Phase
FREQUENCY HZ 50/60
RATED INPUT POWER KW 23
RATED INPUT CURRENT A 34
DUTY CYCLE 40ºC 10 MIN 60% 500A / 100% 400A
NO LOAD VOLTAGE V 68(MIG) 14(MMA)
WELDING CURRENT RANGE A 15 - 500(MIG) 10 - 500(MMA)
WELDING VOLTAGE RANGE V 14 – 50
EFFICIENCY % ≥85
WIRE DIAMETER mm Fe: 0 .6 to 1 .6 Ss:0 .8 to 1 .6 Flux-cored: 0 .6to 1 .6 Al: 1 .0 to 1 .6
NET WEIGHT KG 32 .5
DIMENSIONS mm 605 x 240 x 445
POWER FACTOR 0 .7
COOLING AF
INSULATION CLASS H
PROTECTION CLASS IP23
v 300 mm (20 kg)
HighDuty Cycle
IGBTModule
550V Tested in production
Phase LossProtection
DUAL PULSE FUNCTIONAllows to activate devoted pulse curves for aluminum, mild steel, stainless steel and CiSi3 .
ARC STABILITYWaveform control for added stability of the arc even at low currents .
DIGITAL DISPLAYVariable amperage control with digital meter, for a simultaneous welding current and tension display .
PROTECTIONEquipped with temperature, voltage and current sensors for high protection .
ACCESSORIESThe machine is complete with a MIG torch, argon flow meter, trolley and a earth clamp cable kit. An optional water cooling unit can be added.
P
3 Phase380V/400V415V/440V50Hz/60Hz
Generator Friendly
Dual Phase
Synergetic
MIG
12
Water cooler displayedis an optional extra.
FLAMA MIG 500F SYNERGICDC INVERTER MIG WELDER
PART No. MIG-500F-SYN
MODEL MIG 500F SYN
POWER SUPPLY VOLTAGE V 380 ±10% Three Phase
FREQUENCY HZ 50
RATED INPUT POWER KW 21 .5 (MIG) 18 (TIG) 23 (MMA)
RATED INPUT CURRENT A 33 (MIG) 27 .5 (TIG) 35 (MMA)
DUTY CYCLE 40ºC 10 MIN 60% 500A / 100% 400A
NO LOAD VOLTAGE V 66
WELDING CURRENT RANGE A 40 – 500 (MIG)
WELDING VOLTAGE RANGE V 10 – 50 (MIG)
WIRE DIAMETER mm Fe: 0 .6 to 1 .6 Ss: 0 .8 to1 .6 Flux-cored: 0 .6 to1 .6
NET WEIGHT KG 30
DIMENSIONS mm 605 x 240 x 445
POWER FACTOR 0 .7
EFFICIENCY % ≥85
COOLING AF
INSULATION CLASS H
PROTECTION CLASS IP23
SPECIFICATIONS
P
v 300 mm (20 kg)
HighDuty Cycle
IGBT Module
550V Tested in Production
Synergetic
Phase Loss
Protection Generator Friendly
Spool Gun
Input Voltage
The Flama MIG 500F Synergic is a DC Inverter Multi-process Welder . It is a 380V, three phase machine and is designed for the professional welder . The machine has a high duty cycle and PLP (Phase Loss Protection) . The welder has a soft, stable arc enabling easy welding and high quality welds . A digital display facilitates simple amperage setting and machine operation .The machine is robust, tested to 550V, generator friendly and designed for demanding industrial applications . The machine has waveform control for added stability of the arc even at low current . The unit is Multi-Purpose and MIG, TIG and MMA modes are selectable . The unit is fitted with a robust 4 roll wire-feeder .
MULTI-PROCESSMIG, TIG and MMA modes selectable .
Extra Features:- The machine has 20 Pre-set programs for welding Aluminium,
Mild Steel and Copper Silicon Wires .- The Synergic Option allows for easy Welding control settings .- Synergic Option can also be turned off .
ARC STABILITYWaveform control for added stability of the arc even at low current .
DIGITAL DISPLAYVariable amperage control with digital meter, for a simultaneous welding current display .
PROTECTIONEquipped with temperature, voltage and current sensors for high protection .
ACCESSORIESThe machine is complete with a MIG torch, argon flow meter, trolley and a earth clamp cable kit. An optional water cooling unit can be added.
MIG
13
Water cooler displayedis an optional extra.
AC BALANCE CONTROLAC balance (50-85%) control monitors the oxide and helps improve cleaning during aluminium welding .
PROTECTIONEquipped with temperature, voltage and current sensors for high protection .
ACCESSORIESThe machine is complete with a TIG torch, argon flow meter, wired foot control and a earth clamp cable kit.
FLAMA TIG 200E AC/DC PULSEAC/DC INVERTER HF TIG WELDERThe Flama TIG 200E AC/DC Pulse is a high frequency TIG Welder . The machines can be utilized for both AC and DC TIG pulse welding . It is a 220V, single phase machine and is designed for the professional welder . The unit has a wired remote foot control . This AC/DC TIG welder has a soft, stable arc enabling easy welding and high quality welds . A digital display facilitates simple amperage setting and machine operation . The machine is robust, tested to 440V, generator friendly and designed for demanding industrial applications . The machine has high frequency ignition and pulsing features .
12 PIN
P
Potentiometer Remote Control Torch
Up/Down Remote Control Torch
440V Tested In Production
MCU Control System
Easy Arc Striking
Input Voltage
Wired Foot Control
Inverter Frequency 100KHZ
AC/DC Technology
Generator Friendly
SPECIFICATIONS
PART No. WSME-200
MODEL TIG 200E AC/DC PULSE
POWER SUPPLY VOLTAGE V 220 + 10% Single Phase
FREQUENCY HZ 50
RATED INPUT POWER KW 4 .3 (AC TIG) 3 .8 (DC TIG) 5 .7 (MMA)
RATED INPUT CURRENT A 30(AC TIG) 27(DC TIG) 36 .6(MMA)
DUTY CYCLE 40ºC 10 MIN 35% 200A (AC TIG) 40% 170A (MMA&DC TIG) 60% 155A (AC TIG) 60% 140A (MMA&DC TIG) 100% 120A (AC TIG) 100% 110A (MMA&DC TIG)
NO LOAD VOLTAGE V 52
WELDING CURRENT RANGE A 10 – 200 (AC TIG) / 10 – 170 (MMA & DC TIG)
DOWN SLOPE S 0 – 10
POST FLOW S 1 – 10
PULSE FREQUENCY HZ 0 .5 – 200
AC FREQUENCY HZ 60
PULSE WIDTH RANGE % 5 – 95
CLEARANCE EFFECT(AC TIG) 15 – 50
NET WEIGHT KG 7
DIMENSIONS mm 410 x 146 x 278
EFFICIENCY % ≥85
COOLING AF
INSULATION CLASS IP23
PROTECTION CLASS H
TIG
14
MULTI-WAVEFORM OUTPUTAC waveforms include square wave, sine wave, triangular wave .
AC BALANCE CONTROLAC balance(50-85%) control monitors the oxide and helps better cleaning during aluminium welding .
PROTECTIONEquipped with temperature, voltage and current sensors for high protection .
ACCESSORIESThe machine is complete with a TIG torch, foot control, argon flow meter, trolley and a earth clamp cable kit. An optional water cooling unit can be added.
Generator Friendly
MCU Control System
P
PotentiometerRemote Control Torch
Up/Down Remote Control Torch
550V Tested in Production (380V)
Easy Arc Striking
Wired Foot Control
Phase Loss Protection
Input Voltage
Pulse
AC/DC Technology
High Duty Cycle
IGBT Module
TIG
The Flama TIG 320 AC/DC Pulse is a high frequency TIG Welder . The machines can be utilized for both AC and DC TIG pulse welding . It is a 380V, three phase machine and is designed for the professional welder . It has PLP (Phase Loss Protection) and a high duty cycle . The unit has a wired foot control . This AC/DC TIG welder has a soft, stable arc enabling easy welding and high quality welds . A digital display facilitates simple amperage setting and machine operation . The machine is robust, tested to 550V, generator friendly and designed for demanding industrial applications . The machine has high frequency ignition and pulsing features .
SPECIFICATIONS
PART No. WSME-350
MODEL TIG 320 AC/DC PULSE
POWER SUPPLY VOLTAGE V 380 ±10% Three Phase
FREQUENCY HZ 50
RATED INPUT POWER KW 9 .5 (TIG) 12 (MMA)
RATED INPUT CURRENT A 15 .5 (TIG) 24 (MMA)
DUTY CYCLE 40ºC 10 MIN 60% 320A / 100% 250A
NO LOAD VOLTAGE V 50
WELDING CURRENT RANGE A 10 – 320
UP/DOWN SLOPE S 0 – 10
POST FLOW S 0 – 2/0 – 10
PULSE FREQUENCY HZ 0 .5 – 200
PULSE WIDTH RANGE % 5 – 95
AC FREQUENCY HZ 50 – 250
NET WEIGHT KG 25 .5
DIMENSIONS mm 550 x 240 x 445
POWER FACTOR 0 .75
EFFICIENCY % ≥85
COOLING AF
INSULATION CLASS H
PROTECTION CLASS IP23
FLAMA TIG 320 AC/DC PULSE AC/DC INVERTER HF TIG WELDER
15
Water cooler displayedis an optional extra.
SPECIFICATIONS
MULTI-WAVEFORM OUTPUTAC waveforms include square wave, sine wave, triangular wave .
AC BALANCE CONTROLAC balance(50-85%) control monitors the oxide and helps better cleaning during aluminium welding .
PROTECTIONEquipped with temperature, voltage and current sensors for high protection .
ACCESSORIESThe machine is complete with a TIG torch, foot control, argon flow meter, trolley and a earth clamp cable kit. An optional water cooling unit can be added.
P
PotentiometerRemote Control Torch
Up/Down Remote Control Torch
550V Tested in Production(380V)
Easy Arc Striking
Wired Foot Control
Phase Loss Protection
3 Phase380V/400V415V/440V50Hz/60Hz
Pulse
Generator Friendly
MCU Control System
AC/DC Technology
High Duty Cycle
IGBT Module
FLAMA TIG 500 AC/DC PULSE AC/DC INVERTER HF TIG WELDER
The Flama TIG 500 AC/DC Pulse is a high frequency TIG Welder . The machines can be utilized for both AC and DC TIG pulse welding . It is a 380V, three phase machine and is designed for the professional welder . It has PLP (Phase Loss Protection) and a high duty cycle . The unit has a wired remote foot control . This AC/DC TIG welder has a soft, stable arc enabling easy welding and high quality welds . A digital display facilitates simple amperage setting and machine operation . The machine is robust, tested to 550V, generator friendly and designed for demanding industrial applications . The machine has high frequency ignition and pulsing features .
SPECIFICATIONS
PART No. WSME-500
MODEL TIG 500 AC/DC PULSE
POWER SUPPLY VOLTAGE V 380 + 10% Three Phase
FREQUENCY HZ 50 - 250
RATED INPUT POWER KW 18 .8 (TIG) 25 (MMA)
RATED INPUT CURRENT A 41 (DCTIG) 48 (DCMMA) 37 (DCTIG) 34 (DCMMA)
DUTY CYCLE 40ºC 10 MIN 60% 500A / 100% 390A
NO LOAD VOLTAGE V 50
WELDING CURRENT RANGE A 10 – 500
UP/DOWN SLOPE S 0 – 10
POST FLOW S 0 – 2/0 – 10
PULSE FREQUENCY HZ 0 .5 – 250
PULSE WIDTH RANGE % 5 – 95
AC FREQUENCY HZ 50 – 250
NET WEIGHT KG 30
DIMENSIONS mm 590 x 280 x 485
POWER FACTOR 0 .75
EFFICIENCY % 85
COOLING AF
INSULATION CLASS H
PROTECTION CLASS IP23
TIG
16
Water cooler displayed is an optional extra.
SPECIFICATIONS
P440V Power
Factor Correction
Moisture ProofSalt Spray Proof
Generator Friendly
FLAMA CUT 40 PADC INVERTER PLASMA CUTTER
PILOT ARC CONTROLLERIncreases cutting capabilities and speed . Extends tip’s life . Ideal for grid cutting .
PROTECTIONVarious protective and alarm functions for over-temperature and over-current .
WEIGHTExtremely low weight and versatility .
ACCESSORIESThe machine complete with a PT60 Plasma torch and a earth clamp cable kit.
The Flama Plasma CUT PA is a DC Inverter plasma cutter . It is a 220V, single phase machine and is designed for professional use . The machine has a severance cutting capacity of 25mm on carbon steel and 14 mm on stainless steel and aluminium . The unit is tested to 440V and is generator friendly . The cutter has pilot arc ignition increasing its cutting capabilities and speed . This feature also extends the tip’s life and makes it ideal for grid cutting .
Carbon Steel
Aluminium Copper
MAXIMUM CUTTING THICKNESS
PART No. CUT40PA
MODEL CUT 40 PA
POWER SUPPLY VOLTAGE V 160 - 275
FREQUENCY HZ 50/60
RATED INPUT POWER KW 4 .9
RATED INPUT CURRENT A 32
DUTY CYCLE 40ºC 10 MIN 60% 40A / 100% 30A
NO LOAD VOLTAGE V 32
CUTTING CURRENT RANGE A 20 - 40
SEVERANCE CUT mm ≤25
PRODUCTION CUT mm CARBON STEEL ≤20
STAINLESS STEEL ≤14
ALUMINIUM ≤14
COPPER ≤12
NET WEIGHT KG 7 .3
DIMENSIONS mm 460 x 146 x 278
COOLING AF
INSULATION CLASS H
PROTECTION CLASS IP23
POWER FACTOR 0 .65
SPECIFICATIONS
Cutting performance
PLASMA
17
The Flama Plasma Cut 40 COM is a DC Inverter plasma cutter . It is a 220V, single phase machine and is designed for professional use . The machine is durable, generator friendly and tested to 440V . There is a built in compressor which makes the unit suitable for site work . The machine has a severance cutting capacity of 18mm on carbon steel and 14 mm on stainless steel and aluminium . This plasma cutter is a 220V/single phase machine which has a built in compressor making it ideal for field work . The cutter has pilot arc ignition increasing its cutting capabilities and speed . This feature also extends the tip’s life and makes it ideal for grid cutting .
FLAMA PLASMA CUT 40 COMDC INVERTER PLASMA CUTTER
SPECIFICATIONS
PART No. CUT40COM
MODEL CUT 40 COM
POWER SUPPLY VOLTAGE V 220 ±10% Single Phase
FREQUENCY HZ 50
RATED INPUT POWER KW 4 .9
RATED INPUT CURRENT A 32
DUTY CYCLE 40ºC 10 MIN 60% 40A / 100% 30A
NO LOAD VOLTAGE V 220
CUTTING CURRENT RANGE A 20 – 40
SEVERANCE CUT mm ≤18
PRODUCTION CUT mm CARBON STEEL ≤14
STAINLESS STEEL ≤14
ALUMINIUM ≤14
COPPER ≤5
NET WEIGHT KG 18
DIMENSIONS mm 520 x 213 x 400
COOLING AF
INSULATION CLASS H
PROTECTION CLASS IP23
PILOT ARC CONTROLLERIncreases cutting capabilities and speed . Extends tip’s life . Ideal for grid cutting .
PROTECTIONVarious protective and alarm functions for over-temperature and over-current .
ACCESSORIESThe machine complete with a PT60 Plasma torch and a earth clamp cable kit.
Carbon SteelMaximum cutting thickness
Carbon SteelQuality cutting thickness
P
Input Voltage
Compressor Inside
440V Tested in Production
PLASMA
18
FLAMA PLASMA CUT 65 (CNC)DC INVERTER PLASMA CUTTER
SPECIFICATIONS
PART No. CUT65CNC
MODEL CUT 65 (CNC)
POWER SUPPLY VOLTAGE V 380 ±10% Three phase
FREQUENCY HZ 50
RATED INPUT POWER KW 7 .8
RATED INPUT CURRENT A 17 .4
DUTY CYCLE 40ºC 10 MIN 90% 65A / 100% 61A
NO LOAD VOLTAGE V 300
CUTTING CURRENT RANGE A 20 – 65
SEVERANCE CUT mm ≤35
PRODUCTION CUT mm CARBON STEEL ≤25
STAINLESS STEEL ≤25
ALUMINIUM ≤20
COPPER ≤14
NET WEIGHT KG 24
DIMENSIONS mm 640 x 213 x 445
COOLING AF
INSULATION CLASS H
PROTECTION CLASS IP23
HEAVY DUTY CYCLEMore than 90% .
PILOT ARC CONTROLLERIncreases cutting capabilities and speed . Extends tip’s life . Ideal for grid cutting .
PROTECTIONVarious protective and alarm functions for over-temperature and over-current .
ACCESSORIESThe machine complete with a PT60 Plasma torch and a earth clamp cable kit. An optional 180 deg machine torch can be added.
Cutting performance Carbon steel Maximum cutting thickness
Option
Input Voltage
The Flama Plasma CUT 65 (CNC) is a DC Inverter plasma cutter . It is a 380V, three phase machine and is designed for professional use . The machine is durable, generator friendly and tested to 550V . The machine has a severance cutting capacity of 35mm on carbon steel, 25 mm on stainless steel and 20mm on aluminium . There is a CNC port for automatic cutting applications . The cutter has pilot arc ignition increasing its cutting capabilities and speed . This feature also extends the tip’s life and makes it ideal for grid cutting .
PLASMA
19
The Flama Plasma CUT 100 (CNC) is a DC Inverter plasma cutter . It is a 380V, three phase machine and is designed for professional use . The machine is durable, generator friendly and tested to 550V . The machine has a severance cutting capacity of 50mm on carbon steel, 40 mm on stainless steel and 36mm on aluminium . There is a CNC port for automatic cutting applications . The cutter has pilot arc ignition increasing its cutting capabilities and speed . This feature also extends the tip’s life and makes it ideal for grid cutting .
FLAMA PLASMA CUT 100 (CNC) DC INVERTER PLASMA CUTTER
SPECIFICATIONS
PART No. CUT100CNC
MODEL CUT 100 CNC
POWER SUPPLY VOLTAGE V 380 ±10% Three Phase
FREQUENCY HZ 50
RATED INPUT POWER KW 19
RATED INPUT CURRENT A 36 .8
DUTY CYCLE 40ºC 10 MIN 60% 100A / 100% 80A
NO LOAD VOLTAGE V 495
CUTTING CURRENT RANGE A 20 – 100
SEVERANCE CUT mm ≤50
PRODUCTION CUT mm CARBON STEEL ≤40
STAINLESS STEEL ≤40
ALUMINIUM ≤36
COPPER ≤20
NET WEIGHT KG 23
DIMENSIONS mm 640 x 240 x 445
COOLING AF
INSULATION CLASS H
PROTECTION CLASS IP23
P
Option
Input Voltage
550V Tested in Production
Phase LossProtection
IGBT Module
Digital pressure meter
MCU control system
PILOT ARC CONTROLLERIncreases cutting capabilities and speed . Extends tip’s life . Ideal for grid cutting .
PROTECTIONVarious protective and alarm functions for over-temperature and over-current .
ACCESSORIES The machine complete with a PT100 Plama torch and a earth clamp cable kit. An optional 180 deg machine torch can be added.
Carbon SteelMaximum cutting thickness
Carbon SteelQuality cutting thickness
PLASMA
20
Contact usJohannesburg: 011 392 5661
E-mail: orders@cut-n-weld.co.za | Website: www.cut-n-weld.co.za
Address: Unit 6, 11 Venda Road, Sebenza, 1609, Johannesburg
top related