what is new in nx6
Post on 26-Mar-2015
228 Views
Preview:
DESCRIPTION
TRANSCRIPT
WHAT IS NEW IN NX6 ?
MATHI KRISHNAN
FULL SCREEN DISPLAY
Selection MiniBar
— Selection MiniBar
— View shortcut menu
View Section
Dynamic Sectioning in 3D and 2D Viewer
Allow multi-select of hidden faces
Selection with Multi-select turned off
Selection with Multi-select turned on
Hide objects immediately
De-emphasis settings
No objects de-emphasized
Objects not on workplane de-emphasized
Layer Settings
Decal
Movie capture in NX
True Shading
Vector Constructor
Vector normal to a non-planar face through a point
Vector tangent to a curve at a point
Planes and datum planes using the view plane
Planes and datum planes using On Curve
Datum plane grid
Work Plane and Grid
Rectangular Non-Uniform grid with major and minor lines, on top of model
Block, Cylinder, Sphere, and Cone associativity
Deviation Check
Geometric transform commands
Make Coaxial
Makes one face coaxial to another face.
Make Coplanar
Makes one face coplanar to another face.
Make Parallel
Makes one face parallel to another face.
Make Perpendicular
Makes one face perpendicular to another face.
Make Tangent
Makes one face tangent to another face.
Make Symmetric
Makes one face symmetric to another face about a plane of symmetry.
Move Face
Adaptive Shell
Cross Section Edit
A solid body is edited in a sketch by moving its cross section curves
Pull Face
Synchronous Modeling Dimensions
Linear Dimension
Angular Dimension
Radial Dimension
Reuse commands
Cut Face
Copies a face set, deletes that face set from the body, and heals the open area left in the model.
Copy Face
Copies a face set from a body, keeping the original face set intact.
Paste Face
Pastes a cut face set into a target body.
Mirror Face
Copies a face set, mirrors it about a plane, and pastes it into the part.
Pattern Face
Copies a set of faces in a circular or rectangular pattern, or mirrors them and adds them to a body.
Unite, Subtract, Intersect
Subtract command using a Group feature as the tool body
Curve Mesh and Swept Surfaces
Law Extension surfaces
Patch Openings
Selected edges of openings to patch
Patch Openings feature
N-Sided Surface
Section Surface
Sweep along a Guide
Datum Coordinate Systems
Global Shaping by Function
Overbend by angle input (A) with tangent continuity at bend line (B)
Overbend by distance (D) input
Point Set
Holes
The Hole dialog box has been completely redesigned, with new options and capabilities.
You can:
Create holes on non-planar facesUse new depth optionsCreate tapered holes
Create screw clearance holesCreate an associative series of holes in multiple bodies and components
Hole Series
Blend enhancements
Edge Blend:
Optionally capping (trimming) an edge blend has the following enhancements:
•You can now select a plane as well as faces to cap an edge blend.
•If you cap an edge blend with a plane, you can specify the trim location plane as also being the capping plane.
•If the capping trim plane intersects the blend face in more than one location, you can specify which intersection to use to trim the blend.
•If you cap the blend with one or more connected faces, they can be from the body being blended or from another body.
Face Blend:
•The Multi-transition law type (Dynamic Law) is now available with Face Blend when the Radius Method is set to Law Controlled.
Face Blend using Multi-Transitional
Edge Blend Caps
Move Object
This command provides the traditional translation and rotation capabilities currently available with the Transform command, but also provides additional repositioning functions.
You can:
Dynamically move objects using handles.
Move objects a specific distance along a given vector, towards a given vector, or between two points.
Move and rotate objects along and about a specified vector.
Combined Curve Projection
Mirror Curve
Sketch Style, Parameters, and Preferences Changes
The Sketch task environment has the following new and modified dialog boxes:
Sketch→Sketch Style
Edit→Sketch Parameters
Edit→Style
Preferences→Sketch
Trim Recipe Curve
Orient Sketch on Path axes to a face or a curve
Sketch on Path with axes relative to face on the right
NX Relations Browser
Geometry selection for designing in an assembly context
(1) Select Scope and (2) Create Interpart Link.
Deform Components
Move Component
Replace Component
The multiple Substitute Component dialog boxes are now combined into a single Replace Component dialog box.
The Open As and Open Assembly As functions that were available in the Assembly Navigator are also now consolidated into Replace Component, as follows:
If the Maintain Relations check box is not selected, the selected components are removed, and the replacement part is added as a new component.
If the Maintain Relations check box is selected, NX maintains as many relationsas possible using the open-as capabilities.
You may need to save modified parts, because the selected components are closed and then reopened as the replacement part.
Wireframe color from face
Modeling View
Drawing member view
Crosshatch
Centerline handles
You can use centerline handles to modify associativity objects and lengths of centerline segments. Centerline handles provide on-screen interaction to lengthen or shorten centerlines. The handles appear when you create or edit a centerline symbol. Handles are not supported for the Automatic Centerline command.
— Drag handle to size centerlines — Associativity Handle
Interference curves
Interference curves
Infer diameter dimension for full circles
Diameter dimension Hole dimension
View dialog box enhancements
The following view dialog boxes have been enhanced to meet the new look and feel of the Drafting NX 6 user interface:
DrawingBaseProjectedDetail
Sketch in Drafting
Annotation Leader and Origin dialog box enhancements
The following are a few examples of dialog boxes that have embedded origin and leader blocks that enable you to add, remove, or edit leaders from annotations in Drafting and PMI:
NoteWeld SymbolIdentification SymbolDatum Feature SymbolDatum TargetFeature Control FramePMI Notes dialogs
Leader on screen interaction
Leader handle
2D and 3D Centerlines
Tube with centerline
Smash Custom Symbol
Associativity for ordinate dimensions
Feature Control Frame
When you create Feature Control Frame (FCF) symbol annotations, the following additional tolerance modifiers are available:
Free State modifier Projected modifier and Projected valueCircle U modifier and Circle U valueStatistical Tolerance modifier
For each FCF symbol annotation, you can create:
A unit basis valueA square zone tolerance modifierAn FCF with a maximum toleranceAn FCF with a datum reference with a Free State modifierCompound datum references. Each datum reference in a compound datum reference can have its own Material Modifier Conditions and Free State modifier.
FCF with Unit Basis Value, compound datum references, and Free State symbols
Datum terminator
Filled datum terminator Unfilled datum terminator
Sectioned/Non-sectioned solid bodies
Sectioned Non-sectioned using solid selection
Oriented Section View
3D oriented section cut
Offset Section Line Symbols
Before offset section lineAfter offset section line (Offset corridors only display during creation)
Store custom symbol in part
THANK YOU
top related