with primed red coating - united asphalt company · with primed red coating ... roofnav and/or...
Post on 07-Jul-2018
215 Views
Preview:
TRANSCRIPT
Features & BeneFits oF structodek HigH density witH Primed red coating
COST EFFECTIVE SINGLE-PLY COVER BOARD
LESS ADHESIVE USE – SUPERIOR BONDING
FIBERGLASS FREE – CONTRACTOR FRIENDLY
LIGHTWEIGHT & STRONG – EASY TO ROOF STAGE & FIELD CUT
ADHESIVE COMPATIBLE – LOW VOC, WATER-BASED, SOLVENT-BASED & FOAMS
FM & UL APPROVED IN THOUSANDS OF CLASS 1 & CLASS A FIRE RATED ASSEMBLIES
PRIMED RED 2 SIDES – PROVIDES OPTIMAL BOND IN MULTILAYER SYSTEMS
NO ADDITIONAL PRIMING NEEDED WITH MANY PEEL & STICK APPLICATIONS
MOISTURE-RESISTANT CORE – NO NEED FOR EDGE COATING
UNIVERSAL COVERBOARD – WORKS GREAT IN B.U.R. & COLD-APPLIED SYSTEMS
NON-ASPHALTIC PROPRIETARY PRIMED RED COATING
HAIL RESISTANT – SOUNDSTOPTM TECHNOLOGY
#BRF-BR-3
STRUCTODEK® HDSINGLE-PLY COVERBOARDSTRUCTODEK® HDWITH PRIMED RED COATINGPATENT PENDING
Innovations In Fiber Technology TM
EXAMPLES OF STANDARD UL CLASS A / FM 1-90 RE-ROOF ASSEMBLIES
COMPATIBLE WITH ALLSINGLE-PLY MEMBRANES
GLOVES OPTIONAL - FIBERGLASS FREE
EFFECTIVE & EFFICIENT BONDINGWITH ALL ADHESIVES
Product overview
BLUE RIDGE FIBERBOARD is proud to unveil
STRUCTODEK HD WITH PRIMED RED COATING.
This high density roofing coverboard has been tested and
approved as an integral component by the major membrane
manufacturers who create today's finest roofing systems.
structodek Hd witH Primed red coating recommended aPPlications
• TPO, PVC, CSPE, Single-Ply Membrane
• Bonding adhesive (solvent- or water-based)
• STRUCTODEK HD WITH PRIMED RED COATING
• Existing Roof Assembly
• EPDM Single-Ply Membrane• Bonding adhesive (solvent- or
water-based)• STRUCTODEK HD WITH
PRIMED RED COATING• Existing Roof Assembly
• Built-up Roof Plies• Asphalt• STRUCTODEK HD WITH
PRIMED RED COATING• Existing Roof Assembly
• Modified Bitumen Cap Sheet• Modified Bitumen Base Sheet• STRUCTODEK HD WITH
PRIMED RED COATING• Existing Roof Assembly
comPliances
• FM Approved Class 1 – FM Approval Standard
4450/4470
• UL Classified to Canadian Std CAN/ULC-S107
and US Std UL 790
• ASTM C 208, Type II, Grade 1 and Grade 2
• CAN/ULC-S706-09 Type II, Classes 1 and 2
• Canadian Evaluation CCMC #13186-L
• Miami-Dade County, Florida,
NOA No.13-0626.02, Expiration date 09/18/18
• FBC product approval number, FL #13792.1
• Water Absorption 7% max per ASTM C 208
• Proud member of the Single-Ply Roofing Industry
Single-Ply Fully Adhered
Single-Ply Mechanically Attached
Single-Ply Ballasted
Modified Bitumen Cold
Modified Bitumen Mopped
BUR Ply Sheets
BUR Hybrid
Self-Adhered
Spray Foam (SPUR)
EXAMPLES OF STANDARD UL CLASS A / FM 1-90 NEW CONSTRUCTION ROOF ASSEMBLIES
EASY ROOF LOADING -LIGHT WEIGHT & STRONG
UNIVERSAL - ALSO B.U.R. &COLD-APPLIED COMPATIBLE
Fastening Pattern requirements
For fastening patterns, refer to FM
RoofNav and/or membrane manufacturer
for specific assembly requirements.
ul “P” assemBly requirements
UL Classified STRUCTODEK High Density Fiberboard Roof Insulation can be used in any P Design as part of a Class A, B or C
Roof Covering as specified in the Design.
systems manuFacturers aPProval
Additional joint listings from these manufacturers can be found in the current versions of the UL Roofing Materials and Systems
Directory and the FM Approval Guide for FM Approvals/RoofNav.
• TPO, PVC or CSPE Single-Ply Membrane
• Bonding adhesive (solvent- or water-based)
• STRUCTODEK HD WITH PRIMED RED COATING
• Polyisocyanurate Rigid Insulation
• Metal Roof Deck
• EPDM Single-Ply Membrane• Bonding adhesive (solvent- or
water-based)• STRUCTODEK HD WITH
PRIMED RED COATING• Polyisocyanurate Rigid
Insulation• Metal Roof Deck
• Modified Bitumen Cap Sheet• Modified Bitumen Base Sheet• STRUCTODEK HD WITH
PRIMED RED COATING• Polyisocyanurate Rigid
Insulation• Metal Roof Deck
• Built-Up Roof Plies• Asphalt• STRUCTODEK HD WITH
PRIMED RED COATING• Extruded Polystyrene Rigid
Insulation• Metal Roof Deck
comPliances
• FM Approved Class 1 – FM Approval Standard
4450/4470
• UL Classified to Canadian Std CAN/ULC-S107
and US Std UL 790
• ASTM C 208, Type II, Grade 1 and Grade 2
• CAN/ULC-S706-09 Type II, Classes 1 and 2
• Canadian Evaluation CCMC #13186-L
• Miami-Dade County, Florida,
NOA No.13-0626.02, Expiration date 09/18/18
• FBC product approval number, FL #13792.1
• Water Absorption 7% max per ASTM C 208
• Proud member of the Single-Ply Roofing Industry
BitecTM
Bondcote Corp.®
Burkeline Roofing Systems®
Carlisle® Syntec
Centimark® Corp
CertainTeed
Conklin® Company
Cooley Inc.
Derbigum®
Duro-Last Roofing®
Ecology Roof Systems®
ER Systems®
Firestone Building Products
FlexTM Membrane International
GAF® Materials Corp
GenFlex® Roofing Systems
Henry Company®
Hydro-Stop
Hyload Inc.
IB Roof SystemsTM
Johns Manville
Lexcan Industrial Supply Ltd
Malarkey Roofing Products®
Mule-Hide Products
Polyglass® USA
Sika-Sarnafil®
Seaman Corp
Siplast®
Soprema®
Tamko Building Products®
The Garland Company®
Tremco Inc.®
US Ply
Versico Inc.
*Check with specific membrane manufacturer for system warranty approval and required fastening pattern.
structodek Hd WITH Primed red coating and leedSTRUCTODEK HD is an environmentally friendly product that can help a design team earn LEED credits.
The use of STRUCTODEK HD may contribute to the following LEED credits:
• MR Credit 2: Construction Waste Management
• MR Credit 4: Recycled Content
• MR Credit 5: Regional Material
• MR Credit 6: Rapidly Renewable Materials
• IEQ 4.4: Low-Emitting Materials – Composite Wood and Agrifiber Products
PHysical ProPerties 1/2" values• Thickness ...................................................................................................................... + or - 10%
• Transverse Strength, lbf ..................................................................................................... 12-14
• Tensile Strength Parallel, min, lbf/in2 ....................................................................................150
• Tensile Strength Perpendicular, min, lbf/ft2 ...........................................................................600
• Water Absorption by volume per ASTM C208, max % ..........................................................7
• Moisture Content by weight, max, % ....................................................................................10
• Linear Expansion 50-90% RH, max, % ............................................................................... 0.5
• Modulus of Rupture, min, lbf/in2 ..........................................................................................275
• Deflection at Specified Min. Load, max, in. ......................................................................... 0.75
• Flute Spanability, max width, in. ................................................................................... 1-5/8 (40mm)
• R-Value, ft2-h-ºF/BTU ........................................................................................................... 1.3
• 4' x 4' Packaging ........................................................................................................90 pieces/unit
• 4' x 8' Packaging ........................................................................................................90 pieces/unit
For further information on STRUCTODEK HD WITH PRIMED RED COATING, including data sheet, installation procedures, guide specs, and SDS, visit www.blueridgefiberboard.com.
CUSTOMER SERVICE EASTERN REGION AND CANADA800-233-8721
CUSTOMER SERVICE WESTERN AND SOUTHWESTERN REGION800-535-4088
TECHNICAL SUPPORT800-596-9699
info@blueridgefiberboard.comwww.blueridgefiberboard.com @blueridgefiber
9/14-35M
1:25,000,000
1:12,000,000
0 500 km
0 500 mi
0 500 km
0 500 mi
These maps were put together with data made available by the Earth Science Information Center, U.S. Geological Survey (June 2002). Data obtained from: http://nationalatlas.gov
Alaska
Hawaii Puerto Rico &U.S. Virgin Islands
QR code generated on http://qrcode.littleidiot.be
top related