wood framing interior sheathing where req'd...interior sheathing wood framing insulation where...
Post on 31-Aug-2021
7 Views
Preview:
TRANSCRIPT
WATER RESISTIVE BARRIER(HardieWrap™ or Equivalent)
EXTERIOR SHEATHING
INSTALL BUG SCREENAS NECESSARY
WOOD RAINSCREEN FURRING(3/8" THICK MIN)
1/4" GAP, DO NOT CAULK
APRON FLASHING (OPTIONAL)
MIN. 6" GRADE CLEARANCE
MAX. 2" OVERHANG
GRADE
NOTE:APRON FLASHING OR BOX FLASHINGDESIGNED TO MITIGATE WATER WITHA 15 SLOPE PROVIDES BETTERAESTHETICS.
FOUNDATION
INSULATIONWHERE REQ'D
INTERIOR SHEATHINGWOOD FRAMING
DETAIL:
GRADE CLEARANCE - RAINSCREEN
HARDIE® TEXTURED PANEL
HARDIE® Textured Panel on Wood Framing• Wood Framing with Wood Rainscreen Furring• OSB or Plywood Sheathing
HARDIE®
Textured Panel
1.01a
4/2021
These drawings are published as an information guide only. These CAD drawings are intended as templates to assist the designer.They do not contain the full details required for construction and must be read in conjunction with the installation instructions onwww.jameshardiepros.com. You should obtain architectural, engineering or other technical advice to assess the suitability of thesedrawings to the requirements of your particular project. James Hardie accepts no liability in respect to the use of these drawings.
For fastener specifications and complete installation instructions refer to appropriate documentation at www.jameshardiepros.com.
WATER RESISTIVE BARRIER(HardieWrap™ or Equivalent)
EXTERIOR SHEATHING
1/4" GAP
MIN. 6" GRADE CLEARANCE
GRADE
FOUNDATION
INSULATIONWHERE REQ'D
INTERIOR SHEATHINGWOOD FRAMING
DETAIL:
GRADE CLEARANCE - RAINSCREEN
HARDIE® TEXTURED PANEL
HARDIE® Textured Panel on Wood Framing
• OSB or Plywood Sheathing
HARDIE®
Textured Panel
1.01b
4/2021
These drawings are published as an information guide only. These CAD drawings are intended as templates to assist the designer.They do not contain the full details required for construction and must be read in conjunction with the installation instructions onwww.jameshardiepros.com. You should obtain architectural, engineering or other technical advice to assess the suitability of thesedrawings to the requirements of your particular project. James Hardie accepts no liability in respect to the use of these drawings.
For fastener specifications and complete installation instructions refer to appropriate documentation at www.jameshardiepros.com.
INSTALL BUG SCREENAS NECESSARY
WOOD RAINSCREEN FURRING(3/8" THICK MIN)
• Wood Framing with Wood Rainscreen Furring
NOTE:APRON FLASHING OR BOX FLASHINGDESIGNED TO MITIGATE WATER WITHA 15 SLOPE PROVIDES BETTERAESTHETICS.
INSTALL BUG SCREENAS NECESSARY
WOOD RAINSCREEN FURRING(3/8" THICK MIN)
INTERIOR SHEATHING
WOOD FRAMING
INSULATIONWHERE REQ'D
BOTTOM PLATE
MOISTURE BARRIER
WATER RESISTIVE BARRIER(HardieWrap™ or Equivalent)
EXTERIOR SHEATHING
1/4" GAP, DO NOT CAULK
MIN. 1" - 2" CLEARANCEDEPENDING ON SPECIFICHARDIE ZONE
PATH / DRIVEWAY / SLABAPRON FLASHING(OPTIONAL)
NOTE:APRON FLASHING OR BOXFLASHING DESIGNED TOMITIGATE WATER WITH A 15SLOPE PROVIDES BETTERAESTHETICS.
CONCRETE SLAB /MASONRY FOOTING
DETAIL:
HARDSCAPE CLEARANCE
HARDIE® Textured Panel on Wood Framing
• OSB or Plywood Sheathing
HARDIE®
Textured Panel
1.02a
4/2021
These drawings are published as an information guide only. These CAD drawings are intended as templates to assist the designer.They do not contain the full details required for construction and must be read in conjunction with the installation instructions onwww.jameshardiepros.com. You should obtain architectural, engineering or other technical advice to assess the suitability of thesedrawings to the requirements of your particular project. James Hardie accepts no liability in respect to the use of these drawings.
For fastener specifications and complete installation instructions refer to appropriate documentation at www.jameshardiepros.com.
HARDIE® TEXTURED PANEL
• Wood Framing with Wood Rainscreen Furring
INTERIOR SHEATHING
WOOD FRAMING
INSULATIONWHERE REQ'D
BOTTOM PLATE
MOISTURE BARRIER
WATER RESISTIVE BARRIER(HardieWrap™ or Equivalent)
EXTERIOR SHEATHING
1/4" GAP, DO NOT CAULK
MIN. 1" - 2" CLEARANCEDEPENDING ON SPECIFICHARDIE ZONE
PATH / DRIVEWAY / SLAB
NOTE:APRON FLASHING OR BOXFLASHING DESIGNED TOMITIGATE WATER WITH A 15SLOPE PROVIDES BETTERAESTHETICS.
CONCRETE SLAB /MASONRY FOOTING
DETAIL:
HARDSCAPE CLEARANCE
HARDIE® Textured Panel on Wood Framing
• OSB or Plywood Sheathing
HARDIE®
Textured Panel
1.02b
4/2021
These drawings are published as an information guide only. These CAD drawings are intended as templates to assist the designer.They do not contain the full details required for construction and must be read in conjunction with the installation instructions onwww.jameshardiepros.com. You should obtain architectural, engineering or other technical advice to assess the suitability of thesedrawings to the requirements of your particular project. James Hardie accepts no liability in respect to the use of these drawings.
For fastener specifications and complete installation instructions refer to appropriate documentation at www.jameshardiepros.com.
HARDIE® TEXTURED PANEL
• Wood Framing with Wood Rainscreen Furring
INSTALL BUG SCREENAS NECESSARY
WOOD RAINSCREEN FURRING(3/8" THICK MIN)
EXTERIOR SHEATHING
WOOD RAINSCREEN FURRING(3/8˝ THICK MIN)
RAINSCREEN AIR GAP
LOW PROFILE INSIDECORNER TRIM
HARDIE® TEXTURED PANEL
INSULATIONWHERE REQ’D
WATER RESISTIVE BARRIER(HardieWrap™ or Equivalent)
DETAIL:
INSIDE CORNER - RAINSCREEN
HARDIE® Textured Panel on Wood Framing
• OSB or Plywood Sheathing
HARDIE®
Textured Panel
1.03a
4/2021
These drawings are published as an information guide only. These CAD drawings are intended as templates to assist the designer.They do not contain the full details required for construction and must be read in conjunction with the installation instructions onwww.jameshardiepros.com. You should obtain architectural, engineering or other technical advice to assess the suitability of thesedrawings to the requirements of your particular project. James Hardie accepts no liability in respect to the use of these drawings.
For fastener specifications and complete installation instructions refer to appropriate documentation at www.jameshardiepros.com.
• Wood Framing with Wood Rainscreen Furring
EXTERIOR SHEATHING
HARDIE® TEXTURED PANEL
INSULATIONWHERE REQ’D
WOOD RAINSCREEN FURRING(3/8˝ THICK MIN)
WATER RESISTIVE BARRIER(HardieWrap™ or Equivalent)
DETAIL:
INSIDE CORNER - RAINSCREEN
HARDIE® Textured Panel on Wood Framing
• OSB or Plywood Sheathing
HARDIE®
Textured Panel
1.03b
4/2021
These drawings are published as an information guide only. These CAD drawings are intended as templates to assist the designer.They do not contain the full details required for construction and must be read in conjunction with the installation instructions onwww.jameshardiepros.com. You should obtain architectural, engineering or other technical advice to assess the suitability of thesedrawings to the requirements of your particular project. James Hardie accepts no liability in respect to the use of these drawings.
For fastener specifications and complete installation instructions refer to appropriate documentation at www.jameshardiepros.com.
W INSIDE CORNER TRIM
RAINSCREEN AIR GAP
• Wood Framing with Wood Rainscreen Furring
EXTERIOR SHEATHING
HARDIETRIM® BOARDS
INSULATIONWHERE REQ’D
WATER RESISTIVE BARRIER(HardieWrap™ or Equivalent)
DETAIL:
INSIDE CORNER - RAINSCREEN
HARDIE® Textured Panel on Wood Framing
• OSB or Plywood Sheathing
HARDIE®
Textured Panel
1.03c
4/2021
These drawings are published as an information guide only. These CAD drawings are intended as templates to assist the designer.They do not contain the full details required for construction and must be read in conjunction with the installation instructions onwww.jameshardiepros.com. You should obtain architectural, engineering or other technical advice to assess the suitability of thesedrawings to the requirements of your particular project. James Hardie accepts no liability in respect to the use of these drawings.
For fastener specifications and complete installation instructions refer to appropriate documentation at www.jameshardiepros.com.
HARDIE® TEXTURED PANEL
• Wood Framing with Wood Rainscreen Furring
WOOD RAINSCREEN FURRING(3/8˝ THICK MIN)
RAINSCREEN AIR GAP
LEAVE APPROPRIATEGAP AND CAULK
HARDIETRIM® BOARDS
LEAVE APPROPRIATEGAP AND CAULK
EXTERIOR SHEATHING
INSULATIONWHERE REQ’D
WATER RESISTIVE BARRIER
RAINSCREEN AIR GAP
WOOD RAINSCREEN FURRING(3/8˝ THICK MIN)
(HardieWrap™ or Equivalent)
DETAIL:
INSIDE CORNER - RAINSCREEN
HARDIE® Textured Panel on Wood Framing
• OSB or Plywood Sheathing
HARDIE®
Textured Panel
1.03d
4/2021
These drawings are published as an information guide only. These CAD drawings are intended as templates to assist the designer.They do not contain the full details required for construction and must be read in conjunction with the installation instructions onwww.jameshardiepros.com. You should obtain architectural, engineering or other technical advice to assess the suitability of thesedrawings to the requirements of your particular project. James Hardie accepts no liability in respect to the use of these drawings.
For fastener specifications and complete installation instructions refer to appropriate documentation at www.jameshardiepros.com.
HARDIE® TEXTURED PANEL
• Wood Framing with Wood Rainscreen Furring
EXTERIOR SHEATHING
WATER RESISTIVE BARRIER (HardieWrap™ or Equivalent)
DETAIL:
OUTSIDE CORNER - RAINSCREEN
HARDIE® TEXTURED PANEL
HARDIE® TEXTURED PANEL
HARDIE® Textured Panel on Wood Framing
• OSB or Plywood Sheathing
HARDIE®
Textured Panel
1.04a
4/2021
These drawings are published as an information guide only. These CAD drawings are intended as templates to assist the designer.They do not contain the full details required for construction and must be read in conjunction with the installation instructions onwww.jameshardiepros.com. You should obtain architectural, engineering or other technical advice to assess the suitability of thesedrawings to the requirements of your particular project. James Hardie accepts no liability in respect to the use of these drawings.
For fastener specifications and complete installation instructions refer to appropriate documentation at www.jameshardiepros.com.
• Wood Framing with Wood Rainscreen Furring
WOOD RAINSCREEN FURRING(3/8˝ THICK MIN)
RAINSCREEN AIR GAP
LOW PROFILE OUTSIDECORNER TRIM
HARDIETRIM® BOARDS
EXTERIOR SHEATHING
WATER RESISTIVE BARRIER (HardieWrap™ or Equivalent)
DETAIL:
OUTSIDE CORNER - RAINSCREEN
HARDIE® TEXTURED PANEL
HARDIE® TEXTURED PANEL
HARDIE® Textured Panel on Wood Framing
• OSB or Plywood Sheathing
HARDIE®
Textured Panel
1.04b
4/2021
These drawings are published as an information guide only. These CAD drawings are intended as templates to assist the designer.They do not contain the full details required for construction and must be read in conjunction with the installation instructions onwww.jameshardiepros.com. You should obtain architectural, engineering or other technical advice to assess the suitability of thesedrawings to the requirements of your particular project. James Hardie accepts no liability in respect to the use of these drawings.
For fastener specifications and complete installation instructions refer to appropriate documentation at www.jameshardiepros.com.
• Wood Framing with Wood Rainscreen Furring
WOOD RAINSCREEN FURRING(3/8˝ THICK MIN)
RAINSCREEN AIR GAP
LEAVE APPROPRIATEGAP AND CAULK
HARDIETRIM® BOARDS
LEAVE APPROPRIATEGAP AND CAULK
EXTERIOR SHEATHING
WATER RESISTIVE BARRIER(HardieWrap™ or Equivalent)
DETAIL:
OUTSIDE CORNER - RAINSCREEN
HARDIE® TEXTURED PANEL
HARDIE® TEXTURED PANEL
HARDIE® Textured Panel on Wood Framing
• OSB or Plywood Sheathing
HARDIE®
Textured Panel
1.04c
4/2021
These drawings are published as an information guide only. These CAD drawings are intended as templates to assist the designer.They do not contain the full details required for construction and must be read in conjunction with the installation instructions onwww.jameshardiepros.com. You should obtain architectural, engineering or other technical advice to assess the suitability of thesedrawings to the requirements of your particular project. James Hardie accepts no liability in respect to the use of these drawings.
For fastener specifications and complete installation instructions refer to appropriate documentation at www.jameshardiepros.com.
• Wood Framing with Wood Rainscreen Furring
WOOD RAINSCREEN FURRING(3/8˝ THICK MIN)
RAINSCREEN AIR GAP
WATER RESISTIVE BARRIER(HardieWrap™ or Equivalent)
EXTERIOR SHEATHING
HARDIE® TEXTURED PANEL
HORIZONTAL ZFLASHING TRIM
NOTE:3/8" MINIMUM GAP IS RECOMMENDED TOACCOUNT FOR STRUCTURAL MOVEMENTBETWEEN FLOOR JOINTS.
DETAIL:
HORIZONTAL BREAK @ FLOOR TRANSITION - RAINSCREEN
HARDIE® Textured Panel on Wood Framing
• OSB or Plywood Sheathing
HARDIE®
Textured Panel
1.05a
4/2021
These drawings are published as an information guide only. These CAD drawings are intended as templates to assist the designer.They do not contain the full details required for construction and must be read in conjunction with the installation instructions onwww.jameshardiepros.com. You should obtain architectural, engineering or other technical advice to assess the suitability of thesedrawings to the requirements of your particular project. James Hardie accepts no liability in respect to the use of these drawings.
For fastener specifications and complete installation instructions refer to appropriate documentation at www.jameshardiepros.com.
1/4" GAP, DO NOT CAULK
• Wood Framing with Wood Rainscreen Furring
WOOD RAINSCREEN FURRING(3/8˝ THICK MIN)
INSTALL BUG SCREENAS NECESSARY
WATER RESISTIVE BARRIER(HardieWrap™ or Equivalent)
EXTERIOR SHEATHING
HARDIE® TEXTURED PANEL
HORIZONTAL ANGLEDT-FLASHING TRIM
NOTE:3/8" MINIMUM GAP IS RECOMMENDED TOACCOUNT FOR STRUCTURAL MOVEMENTBETWEEN FLOOR JOINTS.
DETAIL:
HORIZONTAL BREAK @ FLOOR TRANSITION - RAINSCREEN
HARDIE® Textured Panel on Wood Framing
• OSB or Plywood Sheathing
HARDIE®
Textured Panel
1.05b
4/2021
These drawings are published as an information guide only. These CAD drawings are intended as templates to assist the designer.They do not contain the full details required for construction and must be read in conjunction with the installation instructions onwww.jameshardiepros.com. You should obtain architectural, engineering or other technical advice to assess the suitability of thesedrawings to the requirements of your particular project. James Hardie accepts no liability in respect to the use of these drawings.
For fastener specifications and complete installation instructions refer to appropriate documentation at www.jameshardiepros.com.
1/4" GAP, DO NOT CAULK
CAULK
• Wood Framing with Wood Rainscreen Furring
WOOD RAINSCREEN FURRING(3/8˝ THICK MIN)
INSTALL BUG SCREENAS NECESSARY
WATER RESISTIVE BARRIER(HardieWrap™ or Equivalent)
EXTERIOR SHEATHING
HARDIE® TEXTURED PANEL
NOTE:3/8" MINIMUM GAP IS RECOMMENDED TOACCOUNT FOR STRUCTURAL MOVEMENTBETWEEN FLOOR JOINTS.
DETAIL:
HORIZONTAL BREAK @ FLOOR TRANSITION - RAINSCREEN
HARDIE® Textured Panel on Wood Framing
• OSB or Plywood Sheathing
HARDIE®
Textured Panel
1.05c
4/2021
These drawings are published as an information guide only. These CAD drawings are intended as templates to assist the designer.They do not contain the full details required for construction and must be read in conjunction with the installation instructions onwww.jameshardiepros.com. You should obtain architectural, engineering or other technical advice to assess the suitability of thesedrawings to the requirements of your particular project. James Hardie accepts no liability in respect to the use of these drawings.
For fastener specifications and complete installation instructions refer to appropriate documentation at www.jameshardiepros.com.
1/4" GAP, DO NOT CAULK
Z-FLASHING
HARDIETRIM® BOARDS
• Wood Framing with Wood Rainscreen Furring
WOOD RAINSCREEN FURRING(3/8˝ THICK MIN)
INSTALL BUG SCREENAS NECESSARY
WATER RESISTIVE BARRIER(HardieWrap™ or Equivalent)
EXTERIOR SHEATHING
HARDIE® TEXTURED PANEL
NOTE:3/8" MINIMUM GAP IS RECOMMENDED TOACCOUNT FOR STRUCTURAL MOVEMENTBETWEEN FLOOR JOINTS.
DETAIL:
HORIZONTAL BREAK @ FLOOR TRANSITION - RAINSCREEN
HARDIE® Textured Panel on Wood Framing
• OSB or Plywood Sheathing
HARDIE®
Textured Panel
1.05d
4/2021
These drawings are published as an information guide only. These CAD drawings are intended as templates to assist the designer.They do not contain the full details required for construction and must be read in conjunction with the installation instructions onwww.jameshardiepros.com. You should obtain architectural, engineering or other technical advice to assess the suitability of thesedrawings to the requirements of your particular project. James Hardie accepts no liability in respect to the use of these drawings.
For fastener specifications and complete installation instructions refer to appropriate documentation at www.jameshardiepros.com.
1/4" GAP, DO NOT CAULK
Z-FLASHING
LEAVE APPROPRIATE GAPAND CAULK
HARDIETRIM® BOARDS
• Wood Framing with Wood Rainscreen Furring
WOOD RAINSCREEN FURRING(3/8˝ THICK MIN)
INSTALL BUG SCREENAS NECESSARY
FOAM SEALANT SEALANT
EXTERIOR SHEATHING
SEALANT W/BACKER ROD
WATER RESISTIVE BARRIER(HardiWrap™ or Equivalent)
PIPE 1-1/2" OR LESS
DETAIL:
1-1/2" OR LESS PENETRATION TREATMENT - RAINSCREEN
HARDIE® TEXTURED PANEL
HARDIE® Textured Panel on Wood Framing
• OSB or Plywood Sheathing
HARDIE®
Textured Panel
1.06
4/2021
These drawings are published as an information guide only. These CAD drawings are intended as templates to assist the designer.They do not contain the full details required for construction and must be read in conjunction with the installation instructions onwww.jameshardiepros.com. You should obtain architectural, engineering or other technical advice to assess the suitability of thesedrawings to the requirements of your particular project. James Hardie accepts no liability in respect to the use of these drawings.
For fastener specifications and complete installation instructions refer to appropriate documentation at www.jameshardiepros.com.
• Wood Framing with Wood Rainscreen Furring
WOOD RAINSCREEN FURRING(3/8˝ THICK MIN)
BLOCKING AS REQ'D
VENT OPENING
WATER RESISTIVE BARRIERHardieWrap™ or Equivalent
EXTERIOR SHEATHING
1/4" GAP, DO NOT CAULK
FLASHING
TRIM AROUND OPENING
TRIM AROUND OPENING
LEAVE APPROPRIATE GAPAND CAULK
DETAIL:
FIXTURE PENETRATION - RAINSCREENThese drawings are published as an information guide only. These CAD drawings are intended as templates to assist the designer.They do not contain the full details required for construction and must be read in conjunction with the installation instructions onwww.jameshardiepros.com. You should obtain architectural, engineering or other technical advice to assess the suitability of thesedrawings to the requirements of your particular project. James Hardie accepts no liability in respect to the use of these drawings.
For fastener specifications and complete installation instructions refer to appropriate documentation at www.jameshardiepros.com.
HARDIE® Textured Panel on Wood Framing
• OSB or Plywood Sheathing
HARDIE®
Textured Panel
1.07
4/2021
HARDIE® TEXTURED PANEL
• Wood Framing with Wood Rainscreen Furring
WOOD RAINSCREEN FURRING(3/8˝ THICK MIN)
HEADER
WATER RESISTIVE BARRIER(HardieWrap™ or Equivalent)
EXTERIOR SHEATHING
1/4" GAP, DO NOT CAULK
Z-FLASHINGNOTE: REFER TO WINDOWMANUFACTURER’S INSTRUCTIONSFOR PROPER WINDOW INSTALLATION
WINDOW FRAME
DETAIL:
WINDOW / DOOR HEAD - RAINSCREEN
These drawings are published as an information guide only. These CAD drawings are intended as templates to assist the designer.They do not contain the full details required for construction and must be read in conjunction with the installation instructions onwww.jameshardiepros.com. You should obtain architectural, engineering or other technical advice to assess the suitability of thesedrawings to the requirements of your particular project. James Hardie accepts no liability in respect to the use of these drawings.
For fastener specifications and complete installation instructions refer to appropriate documentation at www.jameshardiepros.com.
HARDIE®
Textured Panel
1.08a
4/2021
HARDIE® Textured Panel on Wood Framing
• OSB or Plywood Sheathing
HARDIE® TEXTURED PANEL
• Wood Framing with Wood Rainscreen Furring
INSTALL BUG SCREEN AS NECESSARY
WOOD RAINSCREEN FURRING(3/8˝ THICK MIN)
HEADER
WATER RESISTIVE BARRIER(HardieWrap™ or Equivalent)
EXTERIOR SHEATHING
1/4" GAP, DO NOT CAULK
Z-FLASHING
HardieTrim® Boards
NOTE: REFER TO WINDOWMANUFACTURER’S INSTRUCTIONSFOR PROPER WINDOW INSTALLATION
WINDOW FRAME
DETAIL:
WINDOW / DOOR HEAD - RAINSCREEN
HARDIE® TEXTURED PANEL
These drawings are published as an information guide only. These CAD drawings are intended as templates to assist the designer.They do not contain the full details required for construction and must be read in conjunction with the installation instructions onwww.jameshardiepros.com. You should obtain architectural, engineering or other technical advice to assess the suitability of thesedrawings to the requirements of your particular project. James Hardie accepts no liability in respect to the use of these drawings.
For fastener specifications and complete installation instructions refer to appropriate documentation at www.jameshardiepros.com.
HARDIE® Textured Panel on Wood Framing
• OSB or Plywood Sheathing
HARDIE®
Textured Panel
1.08b
4/2021
• Wood Framing with Wood Rainscreen Furring
WOOD RAINSCREEN FURRING(3/8˝ THICK MIN)
INSTALL BUG SCREEN AS NECESSARY
WOOD RAINSCREEN FURRING(3/8˝ THICK MIN)
NOTE: REFER TO WINDOWMANUFACTURER’S INSTRUCTIONSFOR PROPER WINDOW INSTALLATION.
EXTERIOR SHEATHING
WATER RESISTIVE BARRIER(HardieWrap™ or Equivalent)
FLASH WINDOW PER MANUFACTURERRECOMMENDATION (If trim is protrudingbeyond window sill it must be flashed.)
WINDOW FRAME
WOOD FRAMING
INTERIOR SHEATHING
HARDIE® TEXTURED PANEL
DETAIL:
WINDOW SILL - RAINSCREEN
HARDIE® Textured Panel on Wood Framing
• OSB or Plywood Sheathing
HARDIE®
Textured Panel
1.09a
4/2021
These drawings are published as an information guide only. These CAD drawings are intended as templates to assist the designer.They do not contain the full details required for construction and must be read in conjunction with the installation instructions onwww.jameshardiepros.com. You should obtain architectural, engineering or other technical advice to assess the suitability of thesedrawings to the requirements of your particular project. James Hardie accepts no liability in respect to the use of these drawings.
For fastener specifications and complete installation instructions refer to appropriate documentation at www.jameshardiepros.com.
• Wood Framing with Wood Rainscreen Furring
NOTE: REFER TO WINDOWMANUFACTURER’S INSTRUCTIONSFOR PROPER WINDOW INSTALLATION.
EXTERIOR SHEATHING
WATER RESISTIVE BARRIER(HardieWrap™ or Equivalent)
FLASH WINDOW PER MANUFACTURERRECOMMENDATION (If trim is protrudingbeyond window sill it must be flashed.)
WINDOW FRAME
J-TRIM
WOOD FRAMING
INTERIOR SHEATHING
HARDIE® TEXTURED PANEL
DETAIL:
WINDOW SILL- RAINSCREEN
HARDIE® Textured Panel on Wood Framing
• OSB or Plywood Sheathing
HARDIE®
Textured Panel
1.09b
4/2021
These drawings are published as an information guide only. These CAD drawings are intended as templates to assist the designer.They do not contain the full details required for construction and must be read in conjunction with the installation instructions onwww.jameshardiepros.com. You should obtain architectural, engineering or other technical advice to assess the suitability of thesedrawings to the requirements of your particular project. James Hardie accepts no liability in respect to the use of these drawings.
For fastener specifications and complete installation instructions refer to appropriate documentation at www.jameshardiepros.com.
• Wood Framing with Wood Rainscreen Furring
WOOD RAINSCREEN FURRING(3/8˝ THICK MIN)
NOTE: REFER TO WINDOWMANUFACTURER’S INSTRUCTIONSFOR PROPER WINDOW INSTALLATION.
EXTERIOR SHEATHING
WATER RESISTIVE BARRIER(HardieWrap™ or Equivalent)
FLASH WINDOW PER MANUFACTURERRECOMMENDATION (If trim is protrudingbeyond window sill it must be flashed.)
WINDOW FRAME
WOOD FRAMING
INTERIOR SHEATHING
DETAIL:
WINDOW SILL - RAINSCREEN
HARDIE® Textured Panel on Wood Framing
• OSB or Plywood Sheathing
HARDIE®
Textured Panel
1.09c
4/2021
These drawings are published as an information guide only. These CAD drawings are intended as templates to assist the designer.They do not contain the full details required for construction and must be read in conjunction with the installation instructions onwww.jameshardiepros.com. You should obtain architectural, engineering or other technical advice to assess the suitability of thesedrawings to the requirements of your particular project. James Hardie accepts no liability in respect to the use of these drawings.
For fastener specifications and complete installation instructions refer to appropriate documentation at www.jameshardiepros.com.
HARDIE® TEXTURED PANEL
HARDIETRIM® BOARDS
• Wood Framing with Wood Rainscreen Furring
WOOD RAINSCREEN FURRING(3/8˝ THICK MIN)
NOTE: REFER TO WINDOWMANUFACTURER’S INSTRUCTIONSFOR PROPER WINDOW INSTALLATION.
EXTERIOR SHEATHING
WATER RESISTIVE BARRIER(HardieWrap™ or Equivalent)
FLASH WINDOW PER MANUFACTURERRECOMMENDATION (If trim is protrudingbeyond window sill it must be flashed.)
WINDOW FRAME
WOOD FRAMING
INTERIOR SHEATHING
LEAVE APPROPRIATE GAP AND CAULK
DETAIL:
WINDOW SILL - RAINSCREEN
HARDIE® Textured Panel on Wood Framing
• OSB or Plywood Sheathing
HARDIE®
Textured Panel
1.09d
4/2021
These drawings are published as an information guide only. These CAD drawings are intended as templates to assist the designer.They do not contain the full details required for construction and must be read in conjunction with the installation instructions onwww.jameshardiepros.com. You should obtain architectural, engineering or other technical advice to assess the suitability of thesedrawings to the requirements of your particular project. James Hardie accepts no liability in respect to the use of these drawings.
For fastener specifications and complete installation instructions refer to appropriate documentation at www.jameshardiepros.com.
HARDIE® TEXTURED PANEL
HARDITRIM® BOARDS
• Wood Framing with Wood Rainscreen Furring
WOOD RAINSCREEN FURRING(3/8˝ THICK MIN)
EXTERIOR SHEATHING
FLASHING TAPE
DOOR / WINDOWJAMB
LEAVE APPROPRIATEGAP AND CAULK
WATER RESISTIVE BARRIER(HardieWrap™ or Equivalent)
NOTE:REFER TO WINDOWMANUFACTURER’S INSTRUCTIONSFOR PROPER WINDOW INSTALLATION.
WOOD RAINSCREENFURRING (3/8˝ THICK MIN)
RAINSCREENAIR SPACE
DETAIL:
DOOR/WINDOW JAMB
These drawings are published as an information guide only. These CAD drawings are intended as templates to assist the designer.They do not contain the full details required for construction and must be read in conjunction with the installation instructions onwww.jameshardiepros.com. You should obtain architectural, engineering or other technical advice to assess the suitability of thesedrawings to the requirements of your particular project. James Hardie accepts no liability in respect to the use of these drawings.
For fastener specifications and complete installation instructions refer to appropriate documentation at www.jameshardiepros.com.
HARDIE® Textured Panel on Wood Framing
• OSB or Plywood Sheathing
HARDIE®
Textured Panel
1.10a
4/2021
HARDIE® TEXTURED PANEL
• Wood Framing with Wood Rainscreen Furring
EXTERIOR SHEATHING
FLASHING TAPE
DOOR / WINDOWJAMB
LEAVE APPROPRIATE
J-TRIM
GAP AND CAULK
WATER RESISTIVE BARRIER(HardieWrap™ or Equivalent)
NOTE:REFER TO WINDOWMANUFACTURER’S INSTRUCTIONSFOR PROPER WINDOW INSTALLATION.
DETAIL:
DOOR/WINDOW JAMB
These drawings are published as an information guide only. These CAD drawings are intended as templates to assist the designer.They do not contain the full details required for construction and must be read in conjunction with the installation instructions onwww.jameshardiepros.com. You should obtain architectural, engineering or other technical advice to assess the suitability of thesedrawings to the requirements of your particular project. James Hardie accepts no liability in respect to the use of these drawings.
For fastener specifications and complete installation instructions refer to appropriate documentation at www.jameshardiepros.com.
HARDIE® Textured Panel on Wood Framing
• OSB or Plywood Sheathing
HARDIE®
Textured Panel
1.10b
4/2021
HARDIE® TEXTURED PANEL
WOOD RAINSCREENFURRING (3/8˝ THICK MIN)
• Wood Framing with Wood Rainscreen Furring
RAINSCREENAIR SPACE
EXTERIOR SHEATHING
FLASHING TAPE
DOOR / WINDOWJAMB
LEAVE APPROPRIATEGAP AND CAULK
WATER RESISTIVE BARRIER(HardieWrap™ or Equivalent)
NOTE:REFER TO WINDOWMANUFACTURER’S INSTRUCTIONSFOR PROPER WINDOW INSTALLATION.
DETAIL:
DOOR/WINDOW JAMB
These drawings are published as an information guide only. These CAD drawings are intended as templates to assist the designer.They do not contain the full details required for construction and must be read in conjunction with the installation instructions onwww.jameshardiepros.com. You should obtain architectural, engineering or other technical advice to assess the suitability of thesedrawings to the requirements of your particular project. James Hardie accepts no liability in respect to the use of these drawings.
For fastener specifications and complete installation instructions refer to appropriate documentation at www.jameshardiepros.com.
HARDIE® Textured Panel on Wood Framing
• OSB or Plywood Sheathing
HARDIE®
Textured Panel
1.10c
4/2021
HARDIE® TEXTURED PANEL
• Wood Framing with Wood Rainscreen Furring
WOOD RAINSCREENFURRING (3/8˝ THICK MIN)
RAINSCREENAIR SPACE
EXTERIOR SHEATHING
FLASHING TAPE
DOOR / WINDOWJAMB
LEAVE APPROPRIATEGAP AND CAULK
WATER RESISTIVE BARRIER(HardieWrap™ or Equivalent)
NOTE:REFER TO WINDOWMANUFACTURER’S INSTRUCTIONSFOR PROPER WINDOW INSTALLATION.
DETAIL:
DOOR/WINDOW JAMB
These drawings are published as an information guide only. These CAD drawings are intended as templates to assist the designer.They do not contain the full details required for construction and must be read in conjunction with the installation instructions onwww.jameshardiepros.com. You should obtain architectural, engineering or other technical advice to assess the suitability of thesedrawings to the requirements of your particular project. James Hardie accepts no liability in respect to the use of these drawings.
For fastener specifications and complete installation instructions refer to appropriate documentation at www.jameshardiepros.com.
HARDIE® Textured Panel on Wood Framing
• OSB or Plywood Sheathing
HARDIE®
Textured Panel
1.10d
4/2021
HARDIE® TEXTURED PANEL
• Wood Framing with Wood Rainscreen Furring
RAINSCREENAIR SPACE
WOOD RAINSCREENFURRING (3/8˝ THICK MIN)
SOFFIT
WATER RESISTIVE BARRIER(HardieWrap™ or Equivalent)
INSULATIONWHERE REQ’D
EXTERIOR SHEATHING
CAULK
HARDIE® TEXTURED PANEL
WOOD RAINSCREEN FURRING(3/8" THICK MIN)
DETAIL:
WALL & SOFFIT - VENTED RAINSCREEN
HARDIE® Textured Panel on Wood Framing
• OSB or Plywood Sheathing
HARDIE®
Textured Panel
1.11a
4/2021
These drawings are published as an information guide only. These CAD drawings are intended as templates to assist the designer.They do not contain the full details required for construction and must be read in conjunction with the installation instructions onwww.jameshardiepros.com. You should obtain architectural, engineering or other technical advice to assess the suitability of thesedrawings to the requirements of your particular project. James Hardie accepts no liability in respect to the use of these drawings.
For fastener specifications and complete installation instructions refer to appropriate documentation at www.jameshardiepros.com.
• Wood Framing with Wood Rainscreen Furring
SOFFIT
WATER RESISTIVE BARRIER(HardieWrap™ or Equivalent)
INSULATIONWHERE REQ’D
EXTERIOR SHEATHING
CAULKJ-TRIM
HARDIE® TEXTURED PANEL
DETAIL:
WALL & SOFFIT - VENTED RAINSCREEN
HARDIE® Textured Panel on Wood Framing
• OSB or Plywood Sheathing
HARDIE®
Textured Panel
1.11b
4/2021
These drawings are published as an information guide only. These CAD drawings are intended as templates to assist the designer.They do not contain the full details required for construction and must be read in conjunction with the installation instructions onwww.jameshardiepros.com. You should obtain architectural, engineering or other technical advice to assess the suitability of thesedrawings to the requirements of your particular project. James Hardie accepts no liability in respect to the use of these drawings.
For fastener specifications and complete installation instructions refer to appropriate documentation at www.jameshardiepros.com.
• Wood Framing with Wood Rainscreen Furring
WOOD RAINSCREEN FURRING(3/8" THICK MIN)
NOTE:DO NOT USE HARDIE TRIMOR BOARD AS CAP FLASHING
METAL CAPPING
UNDERLAY TO PROVIDEISOLATION OF METAL
FLASHING TO FRAMING
WATER RESISTIVE BARRIER(HardieWrap™ or Equivalent)
INSULATION
HARDIE® TEXTURED PANEL
WOOD RAINSCREEN FURRING(3/8" THICK MIN)
WHERE REQ’D
EXTERIOR SHEATHING
DETAIL:
PARAPET WALL - RAINSCREEN
HARDIE® Textured Panel on Wood Framing
• OSB or Plywood Sheathing
HARDIE®
Textured Panel
1.12
4/2021
These drawings are published as an information guide only. These CAD drawings are intended as templates to assist the designer.They do not contain the full details required for construction and must be read in conjunction with the installation instructions onwww.jameshardiepros.com. You should obtain architectural, engineering or other technical advice to assess the suitability of thesedrawings to the requirements of your particular project. James Hardie accepts no liability in respect to the use of these drawings.
For fastener specifications and complete installation instructions refer to appropriate documentation at www.jameshardiepros.com.
• Wood Framing with Wood Rainscreen Furring
INSTALL BUG SCREENAS NECESSARY
top related