www.nuuo.com trusted video management nuuo bridge remote setting

www.nuuo.comTrusted Video Management

NUUO Bridge Remote Setting

www.nuuo.comTrusted Video Management

Overview• NUUO Bridge Remote introduction

• Remote Access : Domain

• Remote Access : Workgroup

www.nuuo.comTrusted Video Management

NUUO Bridge Remote Introduction Step :

•1.Start up the Bridge for v 1.0.2

•2. Press Settings and select remote

•3.There are two types for remote connection:

• Domain

• WorkGroup

www.nuuo.comTrusted Video Management

Remote Access : Domain• When select Domain for remote access to Lenel Onguard , you only need to

enter the IP only .

• Please follow the instructions :

• 1) Start > Right Click Computer >Properties

• 2) Click Advanced System Settings on the left

• 3) Go to the Computer Name tab

• 4) Click Change next to “Rename this computer etc “

• 5) Check the box for Domain , not Workgroup . Type your domain name then press OK.

• Note :You might have to enter the details of an Administrator account and you will have to restart the computer .

www.nuuo.comTrusted Video Management

Domain : System Setting

www.nuuo.comTrusted Video Management

•Domain :Domain name Change

www.nuuo.comTrusted Video Management

•Domain: Log in with AD Username/Password

www.nuuo.comTrusted Video Management

•Remote Access : Workgroup• When select Workgroup for remote access to Lenel Onguard , you need to

enter the IP & username / Password

• Please follow the instructions :

• 1) Start > Right Click Computer >Properties

• 2) Click Advanced System Settings on the left

• 3) Go to the Computer Name tab

• 4) Click Change next to “Rename this computer etc “

• 5) Check the box for Workgroup . Type “Workgroup “ then press OK.

www.nuuo.comTrusted Video Management

•Workgroup : System Setting

www.nuuo.comTrusted Video Management

•Workgroup : Change name

www.nuuo.comTrusted Video Management

FAQ

www.nuuo.comTrusted Video Management

•Remote Onguard Configuration requirement• 1) Allow WMI pass Windows Firewall

• Close Windows Firewall directly

• Refer to the link below for section 「 In Windows Firewall, ...」：• http://www.sitepoint.com/php-wmi-dig-deep-windows-php/

• 2) Query Device successfully ， but can not connect to OnGuard

• Refer to the link below for section : 「 To grant DCOM remote access permissions」

• http://msdn.microsoft.com/en-us/library/aa393266

www.nuuo.comTrusted Video Management

Thank you!