y-lock pullforce connector and cable system · solder connection smt solder process reflow mating...
Post on 03-Dec-2018
216 Views
Preview:
TRANSCRIPT
What IS Y-LOCK: appLICatIOnS:
SpeCIfICatIOnS:
The Y-Lock system is developed and tested for different kinds of applications including:
• Automotive applications
• Industrial applications
• Consumer electronics
• Lighting systems
• non-ZIF Board-to-Cable system
• FFC has just to be pushed-in (push-lock) and can be pulled-out (pullforce) without any further action to the connector
• Quick and easy assembly • Two different versions, generation1 and generation 2
•Poka-Yoke system • Pitches: 0.5 and 1.0mm
• 90° and 180° versions
• Various pin counts available
• Automatic assembly of FFC is possible • Produced at TS16949 certified factories
Description Pitch 0.5mm Pitch 1.0mm
Temperature Range -40°C to +105°C
Solder Connection SMT
Solder Process Reflow
Mating Cycles Minimum 10
Contact Plating at mating area 0.3 µm Au 0.3µm Au
Voltage Rating 50V DC 125V DC
Current Rating 0.5A 1A
Packaging Tape & Reel (180° version with Pick & Place cap)
Y-LOCK® pULLfORCe COnneCtOR and CabLe SYStem
SeRIeS Y-Lpf
The Y-Lock connector family is combining a space saving and process securing design with smart and reliable technology. The connector system is designed for applications with tough requirements. Available now in two different generations the Y-Lock is able to fulfill a huge spectrum of tasks in regards to mechanical, climatic and electrical specifications.
The Y-Lock system is developed and tested for different kinds of applications including:
Ordering code for FFC cable
Locking function between the supporting tape on the FFC and the connector. Small hooks on the inner housing of the connector insulator ensuring the locking function between the FFC and connector.
Additional stiffener is assembled mechanically on the FFC. Locking function between stiffener and connector. Poka-Yoke system means it is not possible to insert the FFC in wrong direction. The use of the stiffener is guiding the FFC during insertion.
Yamaichi is offering the complete system including the FFC. For the second generation the stiffener is already assembled.
Y-LPF - F x - xx - xxx -x x - F - V
Serie F = FFC Pitch1 = 1.0mm5 = 0.5mm
Pin Count 12 to 30/50
Tota
l Len
gth
in m
m Direction Supporting Tape A = sameB = opposite
Additional Stiffener
0 = one cable side
2 = two sides
Plating Termination Area F = Au Flash
UL No.
V = UL20706
**Available Pin Counts: 12, 14, 16, 18, 20, 22, 24, 26, 28 and 30
Y-Lock Gen 1
Y-Lock Gen 2
FFc
(GEN 2 version only)
Pitch Part Number Pin Count Orientation
1.00mm Y-LPF-C1-30-S1-BF-R Y-LPF-C1-30-S9-BF-R
** **
180°C 90°C
0.50mm Y-LPF-C5-30-S1-BF-R Y-LPF-C5-30-S9-BF-R
30 30
180°C 90°C
Pitch Part Number Pin Count Orientation
0.50mm Y-LPF-C5-50-S1-BF-REDC 50 180°C
(with other mating design)
AUTOMOTIVE
COMPLIANT
AUTOMOTIVE
COMPLIANT
(depending on the pitch)
Version Oct. 2014
Yamaichi ElEc tronicsItalia s.r.l.Centro Direzionale ColleoniVia Colleoni, 1Palazzo Taurus Ing. 120864 Agrate Brianza (MB)Italy
Phone +39 039 6881-185Fax +39 039 6892-150 E-Mail sales@yamaichi.itWeb www.yamaichi.eu
Yamaichi ElEc tronics GB Ltd.6 The ClockhouseStratton Park Micheldever Hampshire SO21 3DP Great Britain
Phone +44 (0)7808 493377Fax +44 (0)1962 774902E-Mail sales@yamaichi.co.ukWeb www.yamaichi.eu
Yamaichi ElEc tronics Deutschland GmbHConcor Park Bahnhofstraße 20 85609 Aschheim-Dornach Germany
Phone +49 (0)89 45109 - 0Fax +49 (0)89 45109 - 110E-Mail info@yamaichi.deWeb www.yamaichi.eu
Y-lPF-c5-50-s1-BF-rEDc
Y-lPF -c5-30-s1-BF-r (180° tYPE) Y-lPF -c5-30-s9-BF-r (90° tYPE)
Y-lock® PUllForcE connEctor anD caBlE sYstEm
Outline dimensions for 50 pin, 180° type (0.50mm pitch) - GEN 2
Example outline dimensions for 180° and 90° types (0.50mm pitch) - GEN1
TECHNICAL DATA AND SPECIFICATIONS ARE FOR REFERENCE ONLY
top related