an intelligent device packed with featuresbrochurev1... · fleet management applications ... •...

2
36a Gibson Ave Padstow NSW 2211 www.maxon.com.au | [email protected] P 02 8707 3000 | F 02 8707 3001 | INTELIMAX+ FEATURES Supports packet data and 2-way SMS RS232/RS485 Interface (RJ45 Connector) Auto recovery including detect and auto redial Wide ranging input voltage (6-48VDC) Remote AT Command configurable Windows GUI for fast configuratiuon and updates The Intelimax+ is a 3G serial modem designed in Australia for remote monitoring applications, as well as data collection and controlling the flow of data between devices and control equipment. The Intelimax+ is engineered especially to withstand Australia’s vast climate and environmental conditions. Employing an ARM processor, with battery-backed RTC, the Intelimax+ has a full feature set. This includes extensive event recording, connection management, fault recovery, security features, and remote firmware upgradability. All of which assist in creating a highly reliable communications gateway. Enhanced capabilities also include CSD to IP, remote AT Commands, SNMPv3, SSH, Telnet, remote management, onboard IP stack and FTP. This multi-purpose device mounts perfectly in control boxes and alongside other equipment. The Intelimax+ is suitable for global 3G networks and provides a comprehensive range of features that will suit your telemetry requirements. Water Quality and levels Monitoring Remote Monitoring Power and Substations Data Logging Traffic Signals Fleet Management Applications Monitor Security systems and alarms Weather Station 3G Communications Device AN INTELLIGENT DEVICE PACKED WITH FEATURES +

Upload: dinhtuong

Post on 08-Mar-2018

216 views

Category:

Documents


0 download

TRANSCRIPT

36a Gibson Ave Padstow NSW 2211 www.maxon.com.au | [email protected] P 02 8707 3000 | F 02 8707 3001 |

INTELIMAX+ FEATURES

• Supports packet data and 2-way SMS

• RS232/RS485 Interface (RJ45 Connector)

• Auto recovery including detect and auto redial

• Wide ranging input voltage (6-48VDC)

• Remote AT Command configurable

• Windows GUI for fast configuratiuon and updates

The Intelimax+ is a 3G serial modem designed in Australia for remote monitoring applications, as well as data collection and controlling the flow of data between devices and control equipment.

The Intelimax+ is engineered especially to withstand Australia’s vast climate and environmental conditions. Employing an ARM processor, with battery-backed RTC, the Intelimax+ has a full feature set. This includes extensive event recording, connection management, fault recovery, security features, and remote firmware upgradability. All of which assist in creating a highly reliable communications gateway. Enhanced capabilities also include CSD to IP,

remote AT Commands, SNMPv3, SSH, Telnet, remote management, onboard IP stack and FTP.

This multi-purpose device mounts perfectly in control boxes and alongside other equipment. The Intelimax+ is suitable for global 3G networks and provides a comprehensive range of features that will suit your telemetry

requirements.

Water Quality and levels Monitoring

Remote Monitoring Power and Substations

Data Logging

Traffic Signals

Fleet Management

Applications

Monitor Security systems and alarms

Weather Station

3G Communications Device

AN INTELLIGENT DEVICE PACKED WITH FEATURES

+

Frequency BandsWCDMA/HSPA 800 MHz, 850 MHz, 900 MHz, 1900 MHz, 2100 MHz, GSM/GPRS/EDGE 850 MHz, 900 MHz, 1800 MHz, 1900 MHz

* Contact Maxon Australia for further information about Carrier Approvals.

+

36a Gibson Ave Padstow NSW 2211 www.maxon.com.au | [email protected] P 02 8707 3000 | F 02 8707 3001

General Features• RS232 or RS485 (RJ45) (software configurable)

• HSPA/EDGE/GPRS/GSM module

• External SMA Female antenna

• USB 2.0 connection

• Packet switched data

• CSD (Circuit Switch Data) (network dependant)

• SNMPv3

• 2 way SMS

• Remote SMS diagnostics

• Remote SSH and Telnet management

• Remote AT command configurable

• Remote / local user interface

• Extended AT command set

• External DC power

• Wide ranging input power

• Supports DDNS

• Supports TCP/IP, UDP/IP Stack

• Supports Firmware over the AIR (FOTA)

• Onboard FTP Client

• Auto recovery including detect and auto redial

• Inbuilt carrier detection watchdog

• Inbuilt periodic reset

• Inbuilt WAN Schedular

• Diagnostic monitoring (Syslog)

• Backup configuration file (.dat)

Connections• RJ45 Connector for Serial communications (RS232) and Pin 1 for power

• Mini USB connector

• SIM Card

• Antenna Connector SMA Female

• Reset Button

Data• HSPA: UL 5.7 Mbps , DL 7.2 Mbps

• WCDMA PS: UL 384 kbps, DL 384 kbps

• WCDMA CS: UL 64 kbps, DL 64 kbps

• GPRS/EDGE: UL 236 kbps, DL 236 kbps

• GSM CS: UL 9.6 kbps, DL 9.6 kbps

LED• Power (Red)

• RSSI / Data (Red)

Module Approvals• GCF • PTCRB• CE • FCC• Carrier Approvals • ACA*

Environmental Specifications• Operation Temperature -30 to 70° C

• Extreme Operation Temperature -40 to 85° C

• Storage Temperature -40 to 85° C

• Humidity: 5 to 95%

Power• 6 ~ 48 V DC (reverse polarity protection)

• Active Mode - 150mA @ 12V

• Dormant Mode - 50mA @ 12V

• Sleep Mode - 30mA @ 12V

Operating Systems• Microsoft Windows OS

Compliance• RoHS Compliant

• ACMA

• FCC

Dimensions71mm x 55mm x 26mm (without side brackets and antenna)

Mounting• Detachable side mounting brackets