an overview of nrel's online data tool for fuel cell
TRANSCRIPT
![Page 1: An Overview of NREL's Online Data Tool for Fuel Cell](https://reader031.vdocument.in/reader031/viewer/2022020700/61f30e9d4094df43e070cadf/html5/thumbnails/1.jpg)
1 | Fuel Cell Technologies Office eere.energy.gov
An Overview of NREL’s Online Data Tool for Fuel Cell System-Derived Contaminants
Dave Peterson U.S. Department of Energy Fuel Cell Technologies Office
Huyen N. Dinh National Renewable Energy Laboratory
![Page 2: An Overview of NREL's Online Data Tool for Fuel Cell](https://reader031.vdocument.in/reader031/viewer/2022020700/61f30e9d4094df43e070cadf/html5/thumbnails/2.jpg)
NREL is a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC.
An Overview of NREL’s Online Data Tool for Fuel Cell System-Derived Contaminants
Venue: DOE EERE FCTO Webinar
Presenter: Huyen Dinh National Renewable Energy
Laboratory
Date: May 27, 2014
This presentation does not contain any proprietary, confidential, or otherwise restricted information
![Page 3: An Overview of NREL's Online Data Tool for Fuel Cell](https://reader031.vdocument.in/reader031/viewer/2022020700/61f30e9d4094df43e070cadf/html5/thumbnails/3.jpg)
3
Outline
• Motivation • Material Selection • Methodology • Screening Result Examples • Website/Interactive Material Data Tool Demo
![Page 4: An Overview of NREL's Online Data Tool for Fuel Cell](https://reader031.vdocument.in/reader031/viewer/2022020700/61f30e9d4094df43e070cadf/html5/thumbnails/4.jpg)
4
Fuel Cell Electric Vehicle is Almost Here! Manufacturer Launch
Ford ~2017 GM ~2020 Honda ~2015 Hyundai 2013-2015 Daimler ~2017 Nissan ~2017 Toyota ~2015
![Page 5: An Overview of NREL's Online Data Tool for Fuel Cell](https://reader031.vdocument.in/reader031/viewer/2022020700/61f30e9d4094df43e070cadf/html5/thumbnails/5.jpg)
5
Motivation • Balance of plant (BOP) costs have
risen in importance with decreasing stack costs. • Decrease overall fuel cell system
costs by lowering BOP material costs.
• System contaminants have been shown to affect the performance/ durability of fuel cell systems. • Increase performance and
durability by limiting contamination related losses
Examples of common additives in automotive thermoplastics: • Glass fiber • Antioxidant • UV Stabilizer • Flame retardant • Processing aids • Biocides • Catalysts • Residual polymer • Residual solvents
$27
Breakdown of Costs between Stack and BOP
Record Source: http://www.hydrogen.energy.gov/pdfs/13012_fuel_cell_system_cost_2013.pdf
![Page 6: An Overview of NREL's Online Data Tool for Fuel Cell](https://reader031.vdocument.in/reader031/viewer/2022020700/61f30e9d4094df43e070cadf/html5/thumbnails/6.jpg)
6
Fuel Cell Stack & Balance of Plant (BOP)
FC Stack
Air
Back-PressureValve
HydrogenCathode Humidifier
Coolant Pump
Combustor?
Radiator
H2 recirc pmp
Coolant Loop
Water Separator
Cathode Loop
Anode Loop
Air Compressor
90 kWe
D.A. Masten, A.B. Bosco Handbook of Fuel Cells (eds: W. Vielstich, A. Lamm, H.A. Gasteiger), Wiley (2003): vol. 4, chap ter 53, p. 714.
Fuel Cell Stack Fuel Cell System = Fuel Cell Stack + Balance of Plant
http://www.hydrogen-motors.com/chevrolet-equinox-fuel-cell.html
![Page 7: An Overview of NREL's Online Data Tool for Fuel Cell](https://reader031.vdocument.in/reader031/viewer/2022020700/61f30e9d4094df43e070cadf/html5/thumbnails/7.jpg)
7
System Contaminants Originate From the System Itself
Time Pe
rfor
man
ce
![Page 8: An Overview of NREL's Online Data Tool for Fuel Cell](https://reader031.vdocument.in/reader031/viewer/2022020700/61f30e9d4094df43e070cadf/html5/thumbnails/8.jpg)
Material Selection
![Page 9: An Overview of NREL's Online Data Tool for Fuel Cell](https://reader031.vdocument.in/reader031/viewer/2022020700/61f30e9d4094df43e070cadf/html5/thumbnails/9.jpg)
9
Material Selection Materials chosen based on:
1. Physical properties o Operating conditions (0-100% RH, -40-90˚C)
2. Commercial availability 3. Cost 4. Processability 5. Input from OEMs and fuel cell system
manufacturers o GM (active project collaborator) o Ballard Power Systems o Nuvera
Material Selection Prioritization: based on wetted surface area, total mass/volume, proximity to MEAs, function, cost, and performance implications 1. Structural materials 2. Coolants 3. Elastomers for seals 4. Elastomers for (sub)gaskets 5. Assembly aids (adhesives, lubricants) 6. Hoses 7. Membrane degradation products 8. Fuel Impurities 9. Ions from catalyst alloys Note: materials highlighted in red were chosen for this study
The materials selected for the study were not made specifically for fuel cell application. - Identify and quantify what contaminants leach out from BOP materials - Understand where the contaminants come from (e.g., additives) - Determine impact on fuel cell performance - Help guide fuel cell developers & material suppliers select & design BOP materials for fuel
cell applications
![Page 10: An Overview of NREL's Online Data Tool for Fuel Cell](https://reader031.vdocument.in/reader031/viewer/2022020700/61f30e9d4094df43e070cadf/html5/thumbnails/10.jpg)
10
Example of BOP materials selected for the study based on physical property and cost
Size of Component
Information provided by GM
Approximate Material Cost for Structural Plastics in a Fuel Cell System ($/#)**
Polyamides (23)
PSU (2)
PPS (4)
PEI
PPSU (1)
PAI
PEEK
PA 6 < PA 6,6 (5) < PA 666 < PPA* (4) < PA 6,10 < PA 6,12 < PA 12 < PA 10,10*
$1.50 $7.50 $12.50 $30.00+ Approximate Price/#
** Prices are approximations based on 5/2010 dollars, they are dependent on market and specific material. Figure should be used as a general guideline only. Scale is non-linear.
PA = polyamide (nylon); PPA = polyphthalamide; PSU = polysulfone; PPS = polyphenylene sulfide; PPSU = polyphenylsulfone; PEI = polyethylene imine; PEEK = polyether ether ketone; PAI = polyamide imide; PBT = polybutylene terephthalate (Number of materials studied to-date)
PBT (2)
![Page 11: An Overview of NREL's Online Data Tool for Fuel Cell](https://reader031.vdocument.in/reader031/viewer/2022020700/61f30e9d4094df43e070cadf/html5/thumbnails/11.jpg)
11
Screened 60 BOP materials
Function Description Chemical Description Manufacturer
Total Grades
Structural Plastic Polyamide (PA), polyphthalamide (PPA)
(Nylon) DuPont, EMS, BASF,
Solvay, 23 Structural Plastic Polyphenylene sulfide (PPS) Chevron Phillips 4 Structural Plastic Polysulfone (PSU) Solvay 2 Structural Plastic Polyphenylsulfone (PPSU) Solvay 1 Structural Plastic Polybutylene terephthalate (PBT) DuPont 2 Structural Plastic Epoxy Sumitomo 1 Structural Plastic Phenolic Sumitomo 1
Lubricant/Grease Perfluoroalkylether/
polytetrafluoroethylene (PFAE/PTFE) DuPont 4 Adhesive/Seal Urethane 3M, Bostik, Henkel 6 Adhesive/Seal Silicone 3M 2
Adhesive Epoxy 3M, Reltek 3 Adhesive Acrylic acrylate LORD 1
Thread Lock/Seal Polyglycol dimethacrylate (PGDMA), Henkel 4 Thread Sealant PTFE, Diacetone alcohol LACO, Rectorseal 3
Hose Silicone VenAir 3 Total 60
Asse
mbl
y Ai
ds
Stru
ctur
al M
ater
ial
![Page 12: An Overview of NREL's Online Data Tool for Fuel Cell](https://reader031.vdocument.in/reader031/viewer/2022020700/61f30e9d4094df43e070cadf/html5/thumbnails/12.jpg)
Methodology
![Page 13: An Overview of NREL's Online Data Tool for Fuel Cell](https://reader031.vdocument.in/reader031/viewer/2022020700/61f30e9d4094df43e070cadf/html5/thumbnails/13.jpg)
13
Approach/Experimental Methods
Leachant Solutions 60 Materials
GCMS/ICP/IC Identify
organic/ionic contaminants
TOC/Conductivity Quantify
organic/ionic contaminants
Leaching Protocol: • Materials + DI water • 90°C for 1 and 6 weeks • Remove Material
Analytical Membrane Conductivity &
Electrochemical Testing Determine membrane
conductivity & catalyst effect
Ex-situ
Fuel Cell Infusion Determine impact on fuel
cell performance (voltage loss)
In-situ
![Page 14: An Overview of NREL's Online Data Tool for Fuel Cell](https://reader031.vdocument.in/reader031/viewer/2022020700/61f30e9d4094df43e070cadf/html5/thumbnails/14.jpg)
14
Interactive Web Tool
• Material type • Material class • Manufacturers • Trade name & Use • Material Grade
• Solution conductivity • Total organic carbon (TOC) • Ion Chromatography (IC) • Inductively Coupled Plasma
(ICP) • Gas Chromatography Mass
Spectrometry (GCMS) • Leaching Index • In situ fuel cell performance
impact
Input: Material Selection
Data Output
![Page 15: An Overview of NREL's Online Data Tool for Fuel Cell](https://reader031.vdocument.in/reader031/viewer/2022020700/61f30e9d4094df43e070cadf/html5/thumbnails/15.jpg)
Screening Result Examples
![Page 16: An Overview of NREL's Online Data Tool for Fuel Cell](https://reader031.vdocument.in/reader031/viewer/2022020700/61f30e9d4094df43e070cadf/html5/thumbnails/16.jpg)
16
TOC and Conductivity Screening of Extract Solutions
Assembly Aids Materials Structural Materials
• Potential contaminants consist of a mixture of species: organics, inorganics and ions. • Likely target BoP materials: low TOC and low solution conductivity • Higher cost, non-commodity materials (PFAE/PTFE, PPS, PBT, PSU, PPSU) leached out
less ionic and organic contaminants.
1 week soaked leachants, (6 weeks for PFAE/PTFE) 6 week soaked leachants
TOC = Total Organic Carbon
![Page 17: An Overview of NREL's Online Data Tool for Fuel Cell](https://reader031.vdocument.in/reader031/viewer/2022020700/61f30e9d4094df43e070cadf/html5/thumbnails/17.jpg)
17
Leaching Index as a Quick Material Screening Method
GM screened and categorized 34 plastic materials into groups based on their basic polymer resin and brands o Leaching index (conductivity +
total organic carbon) is a quick way to screen plastic materials
o Leaching index shows trends with voltage loss and material cost; In general, the higher the leaching index,
– Higher cell voltage loss – Lower material cost
Decreasing material cost
BES = Bakelite epoxy-based material – Sumitomo; BPS = Bakelite phenolic-based material – Sumitomo; S = Solvay; C = Chevron Philips; B = BASF; D = Dupont; E = EMS
Information provided by GM
Dinh, H.N. "Effect of System Contaminants on PEMFC Performance and Durability." DOE Hydrogen and Fuel Cells Program Annual Merit Review and Peer Evaluation Meeting, Washington, DC, on June 18, 2014.
![Page 18: An Overview of NREL's Online Data Tool for Fuel Cell](https://reader031.vdocument.in/reader031/viewer/2022020700/61f30e9d4094df43e070cadf/html5/thumbnails/18.jpg)
18
Elemental speciation by ICP
Common additives in urethanes1,2: • Flame retardant
• Alumina trihydrate (hydroxide) [Al], K • Fillers and flame retardants
• Limestone, dolomite, talc (Ca,Mg, Si) • Catalysts
• K, Zn
1. Manufacturer’s MSDS; 2. Lindholm, J., et al., J. Appl. Polym. Sci. 123(3): p. 1793-1800 (2011).
Elemental analysis identify leached species, which were linked to fillers and additives (base on knowledge of the type of plastic, common additives and information from datasheets).
ICP = inductively coupled plasma OES = optical emission spectroscopy
Ag Be Cu Mg Pb Tl Al Ca Fe Mn S U As Cd K Na Se V B Co Li Ni Si Zn
Ba Cr Mg P Sr 29 elements; ICP-OES elemental analysis
Major Species Identified via ICP-OES Elemental Analysis
Macomber, C.S.; Christ, J.; Wang, H.; Pivovar, B.S.; Dinh, H.N. "Characterizing Leachant Contaminants from Fuel Cell Assembly Aids, a Prelude to Effects on Performance." ECS Transactions (50:2), 2013; pp. 603-618.
![Page 19: An Overview of NREL's Online Data Tool for Fuel Cell](https://reader031.vdocument.in/reader031/viewer/2022020700/61f30e9d4094df43e070cadf/html5/thumbnails/19.jpg)
19
Anions Quantified by Ion Chromatography [IC]
F - Cl - Br - NO3- PO4
- SO4-
6 anions; IC ionic analysis
Observed species can be attributed to fillers and additives
Macomber, C.S.; Christ, J.; Wang, H.; Pivovar, B.S.; Dinh, H.N. "Characterizing Leachant Contaminants from Fuel Cell Assembly Aids, a Prelude to Effects on Performance." ECS Transactions (50:2), 2013; pp. 603-618.
![Page 20: An Overview of NREL's Online Data Tool for Fuel Cell](https://reader031.vdocument.in/reader031/viewer/2022020700/61f30e9d4094df43e070cadf/html5/thumbnails/20.jpg)
20
Organic Compounds Identified via GCMS Material function Chemical
description Major organic compounds
identified Source of species
Lubricant/ Grease PFAE/PTFE None
Adhesive/Seal Urethane
methyl benzenediamine hydrolysis product of residual monomer
4- methyl benzenesulfoneamide hydrolysis product of a cyano water scavenger
2-(2-ethoxyethoxy)-ethanol acetate
Residual solvent (added for material flowability)
2-(2-ethoxyethoxy)-ethanol
Adhesive/Seal Silicone benzyl alcohol
2-(2-ethoxyethoxy)-ethanol acetate 2-(2-ethoxyethoxy)-ethanol
Adhesive/Seal Epoxy benzyl alcohol [p/o]-tert-butyl-phenol
Adhesive/Seal Acrylic Acrylate 2-methyl-2-hydroxyethyl ester, 2-propenoic acid
Thread Lock/Seal PGDA polyethylene glycol dimethacrylate Lower molecular weight
molecule derived from original polymer
• Organic compounds come from polymer resins, additives, residual solvents, and by-products of incomplete polymerization.
• The more expensive materials such as PFAE/PTFE are clean (no organics detected).
PFAE/PTFE = Perfluoroalkylether/ polytetrafluoroethylene; PGDA = Polyglycol Dimethacrylate GCMS = gas chromatography mass spectrometry
Macomber, C.S.; Christ, J.; Wang, H.; Pivovar, B.S.; Dinh, H.N. "Characterizing Leachant Contaminants from Fuel Cell Assembly Aids, a Prelude to Effects on Performance." ECS Transactions (50:2), 2013; pp. 603-618.
![Page 21: An Overview of NREL's Online Data Tool for Fuel Cell](https://reader031.vdocument.in/reader031/viewer/2022020700/61f30e9d4094df43e070cadf/html5/thumbnails/21.jpg)
21
Contaminates, partially recovers
HFR
(Ω-c
m2 )
Urethane example TOC = 1280 ppm
In-situ infusion screening for impact on fuel cell performance (at 0.2 A/cm2)
System contaminants can have an adverse effect on fuel cell performance, but the effect is complex. Some contamination are recoverable while others are not.
HFR
(Ω-c
m2 )
iR
-free
Vol
tage
(V)
HFR
(Ω-c
m2 )
Contaminates, Does not recover
HFR
(Ω-c
m2 )
iR-fr
ee V
olta
ge (V
)
Epoxy example TOC = 1695 ppm
clean
Material Classification by Result
iR-fr
ee V
olta
ge (V
)
HFR
(Ω-c
m2 )
PFAE/PTFE example TOC = 10 ppm
Opu, M.S.; Ohashi, M.; Cho, H.S.; Macomber, C.S.; Dinh, H.N.; Van Zee, J.W. "Understanding the Effects of Contaminants from Balance of Plant Assembly Aids Materials on PEMFCs-In Situ Studies." ECS Transactions (50:2), 2013; pp. 619-634.
![Page 22: An Overview of NREL's Online Data Tool for Fuel Cell](https://reader031.vdocument.in/reader031/viewer/2022020700/61f30e9d4094df43e070cadf/html5/thumbnails/22.jpg)
22
Performance Impact & Mitigation Strategy Remarks
Fuel Cell Performance Impact Considerations • Contamination impact depends on operating conditions (current density, concentration, Pt
loading, RH interaction with Pt loading & concentration, temperature). • Operating conditions (e.g., time, temperature) that cause more liquid/plastic contact need to
be considered in developing a fuel cell system • Cost, resin type & additives need to be considered when selecting BOP plastic materials
Suggested mitigation strategies: • Minimize extract solution concentration (low leaching index)
o Minimize contact time of the plastic materials with water in the fuel cell system o Minimize exposure of plastic material to high temperature o Increase RH (water flush) or increase RH and potential cycling (ex-situ recovery) o Choose clean BOP materials (usually more expensive, resin type) o Modify commercial plastic materials to minimize contaminants (i.e., coating, less or alternative
additives)
• Add filter and/or consider other mitigation methods
![Page 23: An Overview of NREL's Online Data Tool for Fuel Cell](https://reader031.vdocument.in/reader031/viewer/2022020700/61f30e9d4094df43e070cadf/html5/thumbnails/23.jpg)
Website Live Demo
![Page 24: An Overview of NREL's Online Data Tool for Fuel Cell](https://reader031.vdocument.in/reader031/viewer/2022020700/61f30e9d4094df43e070cadf/html5/thumbnails/24.jpg)
24
Summary • A relatively large material data base is now publicly
accessible & all of the information can be found in one place
• Intended to help fuel cell industry select appropriate BOP materials & in cost-benefit analyses.
• Help fuel cell developers and material suppliers develop clean materials for fuel cell application
• Designed the web tool to be interactive, informative & easy to use
• Will continue to improve the website, so feedback is welcome
• Look for our publications for more in depth analysis of the results
![Page 25: An Overview of NREL's Online Data Tool for Fuel Cell](https://reader031.vdocument.in/reader031/viewer/2022020700/61f30e9d4094df43e070cadf/html5/thumbnails/25.jpg)
25
Acknowledgements The Department of Energy EERE Fuel Cell Technology Office for project funding.
• Dave Peterson & Kathi Epping, Technology Development Manager
3M, Ballard Power Systems, Nuvera Fuel Cells, Proton Onsite, Sumitomo, BASF, Chevron Phillips, DuPont, Solvay, EMS, Bostik, Henkel, LORD, Reltek, LACO, Rectorseal, VenAir for providing materials for screening development.
Ranville group at Colorado School of Mines for the ICP-OES and IC measurements NREL team members: Clay Macomber, Guido Bender, Heli Wang, KC Neyerlin, Bryan
Pivovar, Huyen Dinh NREL website developer team: Chris Ainscough, Sara Havig, Shauna Fjeld, Michael Oakley General Motors: P. Yu, K. O’Leary, B. Lakshmanan, E.A. Bonn, Q. Li, A. Luong, R. Reid, J.
Sergi, R. Moses, S. Bhargava, and T. Jackson University of South Carolina: J. Weidner, B. Tavakoli, J. Van Zee, M. Ohashi, M. Opu, M.
Das, H. Seok Cho University of Hawaii: J. St-Pierre, K. Bethune Colorado School of Mines: J. Christ, R. Richards Los Alamos National Laboratory: T. Rockward 3M: S. Hamrock
![Page 27: An Overview of NREL's Online Data Tool for Fuel Cell](https://reader031.vdocument.in/reader031/viewer/2022020700/61f30e9d4094df43e070cadf/html5/thumbnails/27.jpg)
27
Question and Answer
• Please type your question into the question box
hydrogenandfuelcells.energy.gov
![Page 28: An Overview of NREL's Online Data Tool for Fuel Cell](https://reader031.vdocument.in/reader031/viewer/2022020700/61f30e9d4094df43e070cadf/html5/thumbnails/28.jpg)
28
Thank You
hydrogenandfuelcells.energy.gov