andex rotary rakes - b&b tractors · andex rotary rakes are designed to produce well-shaped and...
TRANSCRIPT
2
...CompactLine or ProLine?
Maintenance-free oil-immersed system.
Oil-immersed gearbox.
ProLine 10 mm diameter tine arms.
3
Wear-Free Operation
The Vicon Andex Compact
Line and ProLine rakes are
designed for maximum
performance with minimum maintenance.
ProLineThe Andex ProLine rakes feature a unique drive
system, which comprises oil-immersed pinion
and crown wheels. The fully enclosed design
ensures full and permanent lubrication, and
makes the entire system absolutely maintenan-
ce-free.
Our extensive experience guarantees well-
proven technology of the highest standard. The
hardened cam track is adjustable and features
a fl at curve and an extremely large 400 mm
diameter, giving positive guidance to the steel
rotors and quiet machine running.
Aluminium bearing housings, with two integral
ball bearings and wide support, provide solid
and maintenance-free tine arm mounting.
Advantages:
• Oil-immersed crown wheel and pinion
reduces wear to a minimum
• Pinion gear features two bearings for the
driveshaft
• Crown wheel mounted on 4-point radial
bearing
• Permanently lubricated steel guide rollers
• Flat 400 mm cam track, made from high-
tensile SG iron
• Injection moulded aluminium tine arm support
housings
• Generously dimensioned 10 mm diameter
tine arms
CompactLineThe Andex CompactLine rakes feature oil-
immersed cam discs and guide rollers. Also,
the tine arm bearings are fully lubricated, and
hence absolutely maintenance-free.
High-tensile tine arm holders and two bearings
on either side of the driveshaft, provide the
compact unit with strength and dependability.
Vicon-developed cam tracks are specifi cally
tailored to individual rotor diameters, for opti-
mum raking at any working width and on any
model.
The Complete Range of Rakes
Outstanding DurabilityThe Vicon rakes are equipped for maximum
raking performance. The CompactLine
rakes all feature 9 mm wire diameter
tines, whereas the ProLine rakes include
heavy duty 10 mm wire diameter tines for
outstanding durability.
Exceptional Raking PerformanceWith up to 15 double tangential tine arms
and up to 5 double tines per arm Vicon
Andex rakes are equipped for maximum
raking performance. The high tine frequency
ensures clean raking performance even
at reduced rpm and high forward speed.
Infi nitely variable cam track adjustment
allows fi ne tuning to obtain optimum raking
and swath formation according to crop
conditions.
Vicon ProLine
rakes, with up to 56 pairs of
10 mm tines, ensure excellent raking performance.
Perfect Ground FollowingAndex rotary rakes are designed to produce
well-shaped and clean swaths, achieved
by precision in every part of the raking. The
ground contour following ability is important
to avoid dirt in the swath - especially in
uneven fi eld conditions.
Adaptation in 3 DimensionsThese high performance rakes are fi tted
with the TerraLink Quattro wheel system
for superb ground contour following. The
TerraLink Quattro system controls the rotor
in 3 dimensions, with a unique combination
of an undercarriage with 4 wheels and a
specially designed rotor suspension system.
This ensures superb raking performance,
even at higher forward speeds.
TerraLink Quattro
TerraLink Offers 4-Fold Advantages:The TerraLink system offers clear
advantages over pivoting linkage systems:
• maintenance-free system - no pivots or
joints to wear out.
• automatic rotor suspension, ensuring
smooth operation.
• built-in pressure bias on front wheels
prevents lifting and tine bounce.
• optimum ground following for clean raking
at high forward speeds. All wheels are
positioned close to the tines.
TerraLink Quattro is a maintenance free system
- no pivots or joints to wear out.
6
Compact design for easy maintenance.
Andex 323-353-393-423(T)-433 • CompactLine
Compact Design, Low Maintenance
The Compact RangeFor smaller raking operations, Vicon offers
fi ve models designed for use on lower
horsepower tractors, whilst delivering similar
raking performance to its higher specifi cation
machines. With the option of pivoting or fi xed
three point linkage mounting and also
a trailed version, there is a model to suit
any need, from lowland farmer, to the user
looking for clean raking performance, even
when working on steep hillsides.
Andex ‘Compact’ Rotor HeadThe rotor head is grease lubricated.
Within a fully enclosed housing, The
maintenance free cam track and cam
followers are running permanently lubricated
in an oil bath. The rotor shaft and pinion
shaft are all mounted on two bearings
for maximum strength and long service life.
7
All rakes can be set for reduced transport width
by removing the tine arms and placing them on
the carrier frame.
As an option the rotary rakes can be equipped
with a third wheel to improve ground contour
following.
A pivoting 3-pt headstock ensures perfect
ground following performance, and perfect
tracking when cornering. Oscillation dampers
are optionally available.
Curved Tine ArmsAll Andex CompactLine rakes feature
cranked tine arms for signifi cantly cleaner
raking performance and optimised swath
formation. This design ensures that the row
of tines on each tine bar has a more effective
approach angle to the oncoming crop, and
also gives a cleaner lift out of the tine from
the formed swath.
The Andex 353 with 3.5 m working width offers
high performance with a simple but reliable
system.
With a linkage mounted drawbar, the Andex
423T can be easily operated by low horse power
tractors.
The machine can conveniently be raised up to a
height of 50 cm from the tractor driver’s seat.
The Andex 393 with 3.9 m working width for fast
and effective raking action. A crank extension
for height adjustment from the tractor cab is
available for all types.
8
Andex 423-463 • ProLine
Built-In Reliability
High PerformanceThe Andex 423 and 463 are high
performance rakes fi tted with the oil bath
gear box. The standard bogie wheels
offer perfect ground contour following and
minimises the amount of dirt collected in
the swath. As an option these rakes can be
supplied with a third wheel, to ensure even
better fl otation.
Andex 463 ProLine
single rotor rake with 4.6 m
working width.
9
Standard Hydrolift Height AdjustmentFor maximum operating convenience Andex
423 and 463 are fi tted as standard with a
hydraulic height adjusting facility - Hydrolift.
From the tractor seat you can quickly set
the tine height, to match the length of stubble
or different ground conditions. No other
supplier offers the same system.
As an option these rakes can be supplied
with a third wheel, to ensure even better
fl otation.
Hydrolift height adjustment.Infi nitely variable cam track adjustment allows
fi ne tuning, to obtain optimum raking and swath
formation according to crop conditions.
For road transport or storage, the rotor guard
frames are folded up close to the main frame,
where they automatically lock into position. An
assistor spring linked to the swath defl ector
reduces the effort required.
10
Andex 713T VARIO-713T EVO • CompactLine
The Flexible Raking Solution
Flexible RakingThe Andex 713T VARIO and 713T EVO are
designed for maximum fl exibility for raking in
different conditions. The twin rotors, working
independently from each other, makes it
possible to collect either one large swath or
two smaller night swaths. Alternatively the
rakes can place two large swaths into
one, allowing a total of up to 12.5 m crop to
be gathered into one swath.
VARIO or EVO specifi cationThe VARIO version also offers the patented
SideShift system as an option, which
comprises electro-hydraulic control of all
functions, as well as 12 tine arms on the rear
rotor.
Vicon SideShiftA special feature on the Andex 713T is the
possibility to sideshift both rotors - both
front and the rear - from the tractor cab.
With this patented system, raking along fi eld
boundaries or around trees is no problem -
as the tractor can run at a safe distance from
the obstacles. It is also possible to drive with
the tractor on already raked ground.
SideShift to the right - conveniently passing
trees.
SideShift to the left - raking without driving on
unraked crop.
11
The new 713T VARIO with 7.1 m working width
and unique new SideShift device.
Vicon TerraLinkCompletely maintenance- and wear-free:
• Quiet machine running due to automatic
damping.
• Wide track bogies with large wheels
provide perfect ground contour following.
• Trailed axle confi guration enhances quiet
running and reduces tractor input power.
• Superb tracking in road transport.
Easy Conversion from Working to Transport Confi gurationThere’s no need to remove tine arms:
moving the Andex 713T VARIO and 713T
EVO to transport position only requires a
simple operation on the control unit. The
swath defl ector will automatically fold clear,
and transport width for Andex 713T VARIO
and 713T EVO is only 3.00 m (to reach
2.45 m, the tine arms can be removed).
With 50 cm lifting height, swaths can be driven
over with no problem at all. Rotors are lifted
using only a single acting valve.
Both rakes are capable of placing small night
swaths for hay crops.
12
Andex 693 VARIO-693 EVO • CompactLine
The Andex 693 Side Delivery RakeCompleting the CompactLine of side delivery
rakes, this compact and nimble rake features
a sturdy frame and the well-proven TerraLink
Quattro ground-following system. In addition
the VARIO model offers the possiblity of
putting together two swaths.
With a working width of 6.90 m, the machine
rakes up double swaths of up to 13.20 m.
There are 11 removable tine arms each fi tted
with 4 tines which are curved to the unique
Vicon design to enable cleaner raking.
A host of exciting details such as the well
thought-out continuous driveline make Andex
693 a universal machine that suits a wide
range of applications. Trailing bogie wheels
make for tight cornering without rotors risking
to tilt and tines to scrape the ground. The
two rotors provide generous overlapping and
the cam tracks are matched to each other to
transfer the material uniformly.
Andex 693 like all Vicon frame-based rakes,
features a headstock that turns through a 90°
angle to give superb tracking and superior
manoeuvrability.
CompactEffectiveness
13
Andex 773 • ProLine
Side Delivery Rakes
Pure Working WidthThe Andex 773 with controlled steering
facility is fi tted with 2x12 double tangential
tine arms which can collect a double swath.
The side-delivery system is capable of
raking crop from 14.5 m working width into
one swath ensuring an effi cient harvesting
chain. It is equipped with a strong carrier
frame and oil-bath gearboxes for extreme
reliability.
Variable Swath SizeThe Andex 773 offers unique fl exibility - it
can produce either a single large swath
or two smaller swaths (option). It is very
simple to change between the different
confi gurations when working with the Andex
773. The rake is set to the desired position
hydraulically and changeover can be carried
out in the fi eld.
Crop from 14.5 m working width into one swath
- wider working width than most other suppliers.
The Andex 773 forming 2 swaths with 8.4 m
working width.
The 4-wheel carrier of the rotorframe
ensures that the rake glides smoothly and
evenly. The close positioning of the wheels
in relation to the tines ensures that they
follow the ground contours perfectly.
14
Andex 633-703-763 • CompactLine
Compact Design - High Performance
Centre Swath RakesVicon offers three cost-effective two rotor
rakes with strong frames. The rakes
produce a nice even centre swath from raking
widths of between 6.3 and 7.8 m. They are
mounted on a strong and stable frame to
ensure long lifetime. Features such as actively
steered wheels, the TerraLink Quattro system
and hydraulically raised rotors are standard.
Andex 703 with 7.0 m working width. Andex 633 with 6.3 m working width.
The Andex 633, 703 and
763 double rotor rakes are
all designed with durability in mind.
15
Andex 763The new Andex 763 double rotor rake offers
hydraulically adjustable working width that can
be set between 7.0-7.8 m. Swath width can
also be varied from 1.20 -1.90 m, ensuring a
perfect match to the pick up width of loader
wagons, balers and foragers.
Unique ManoeuvrabilityThe rear carrier frame with controlled steering
facility allows tight turns on headlands and
loss free swathing even in awkwardly shaped
fi elds. Even if the rotors are lifted on a steep
slope, the steering system reliably counteracts
any deviation. The ability to make sharp
turns up to 90° and the cross stabilizer in the
headstock are unique Vicon features.
The hydraulic adjustable rotors can be set
between 7.0 m...
…and 7.8 m working width.
Vicon centre swath rakes are converted
hydraulically for transport from the tractor cab.
To limit transport height further the main frame
can optionally be hydraulically lowered and the
tine arms can be removed.
The Andex 763 is fi tted with an under-carriage
with 4 wheels and TerraLink Quattro for excellent
raking.
Perfect ground clearance on headlands due to
high positioned main frame.
16
Andex 783-843 • ProLine
The Heavy Duty Rakes
Centre Swath RakesWith adjustable working widths of 7.0 to
7.8 m and 7.6 to 8.4 m these heavy duty
contractor specifi cation rakes provide the
swath formation capability to keep harvesting
operations running at their optimum output.
At the heart of both models is a heavy-duty
rotor head system. Proven to perform year
in, year out in heavy fi rst cut crops, they
are superbly engineered, with the crown
wheel and pinion assembly running in a fully
enclosed oil bath.
Vicon Sets New StandardsThe rear carrier frame with controlled
steering facility gives this rake excellent track
following characteristics, allowing tight turns
on headlands and loss free swathing even in
awkwardly shaped fi elds. Even if the rotors
are lifted on a steep slope, the steering
system reliably counteracts any deviation.
Raking with only one rotor.
Andex 843 with
fully enclosed gearbox and
hydraulically adjustable working width.
1717
Adjustable Working Width The working width is hydraulically adjustable
from the tractor cab. For Andex 783 the
working width can be set between 7.0-7.8 m
and for the Andex 843 7.6-8.4 m.
The hydraulic adjustable rotors can be set
between 7.0 m...
… and 7.8 m working width.
The Andex centre swath rakes are converted
hydraulically for transport position from the
tractor cab. Tine arms are removeable.
The ability to make sharp turns up to 90° and
the cross stabilizer in the headstock are unique
Vicon features. Convinient for turning on
headlands with perfect ground clearance.
The Andex 783 and 843 are the perfect rakes for
producing swaths with big balers, as the swaths
it produces are large and evenly formed.
18
Andex 1103 • ProLine
High Flexibility and Performance
11 m Working PowerVicon introduces a new twin rotor rake with
11 m working width, for the high performance
segment, normally covered by more expensive
four rotor rakes.The new Andex 1103 offers
easy operation, excellent manoeuvrability
and a heavy duty design. Despite a working
width of 11 m, the rake is very compact and
manoeuvrable in the fi eld. Convenient when
working in smaller fi elds.
Standard equipment on the Andex 1103 includes
the maintenance-free TerraLink system, for
superb ground following.
TerraLink QuattroThe Andex 1103 is fi tted with the TerraLink
Quattro system, offering perfect ground
contour followings. A unique combination of an
undercarriage with 6 wheels, and a specially
designed rotor suspension, ensures a superb
raking performance, even at high forward
speed.
The Andex 1103, with up
to 11 m working width, designed for
heavy duty operation and maximum performance.
19
Adjustable Rotor HeightHydraulic height adjustment of the rotors to
suit the length of stubble or ground conditions,
along with hydraulic suspension to reduce
ground pressure.
Adjustable Working WidthHydraulically adjustable working width/swath
width to be set between 9.6 & 10.9 m.
Active wheel steering, allowing sharp turns on
headlands and during transport.
The Andex 1103 is built around two heavy duty
gearboxes, designed for hard work. The fully
enclosed design ensures permanent lubrication
and maintenance-free operation.
Easy OperationThe new Andex 1103 is designed for easy
operation, with a number of features, making
the working day as comfortable as possible.
15 Tine Arms per RotorWith 15 double tangential tine arms and 4
double tines per arm, the Andex 1103 is well
equipped for maximum raking performance.
The high tine frequency ensures clean raking
performance, even at reduced rpm and high
forward speed.
To reach a transport height below 4 m, the tine
arms are removed and placed safely on the
carrier frame.
20
Andex 1503 • ProLine
15 m Working Width
15 m Working WidthThe Andex 1503 with 15 m working width is
designed for high output and heavy use. It
is fi tted with a total of 56 tine arms and 254
tines. Four rotors, each fi tted with 13/15 tine
arms and 4/5 tines per arm.
Brakes and TyresA choice of tyre sizes (550/45 R22.5) not
only ensures gentle treatment of the ground,
but also makes for excellent stability both
in the fi eld and on the road. Hydraulic or
pneumatic brakes permit road speeds up to
50 km/h, so it takes minimum time to move
the machine from one fi eld to another.
A Superbly Manoeuvrable UnitThe 2-pt headstock allows a turning angle
up to 90° and the steered wheel axles
ensure these Vicon rakes have unequalled
manoeuverability. Despite a total length of
9 m, even narrow gateways or approach
lanes to fi elds are easily negotiated.
Optimal Ground Pressure at all TimesHydraulic ground pressure control means
constant and adjustable pressure on the
rotors regardless of their position on the
carrier frame. Free mobililty in three planes
combined with six steered twin wheels per
rotor give each rake head perfect ground
following ability for the cleanest possible
raking performance.
Each rotor can independently be set for
height using the electric in-cab control system
(option).
21
The operator-friendly AutoForm control
box gives fully automatic or manual control of
the rake. All major functions, e.g. lifting
for headland turns or folding & unfolding the
unit into transport or operating position, are
activated by simply pressing one switch.
Programmable delay between lifting and
lowering of each pair of rotors keeps the
operator’s workload to a minimum.
AutoForm
Adjustable Working WidthRaking width can be continuously varied on
the move between 9.5 m and 15 m. Raking
width can be matched to the density of crop
to obtain an evenly shaped and equally
wide swath over the full length. You can
independently steer an outside rotor around
an obstacle such as a pole or tree without
having to change travel direction with the
complete machine.
The two outer rotors can be adjusted individually
to match a working width between 9.5-15 m.
Fast and easy folding mechanism.
With its clever folding mechanism the total
height remains below 4 m - despite a rotor
diameter of 3.8 m! And there’s no need to remove
tine arms for road transport.
The Andex 1503 can optionally be supplied
with active steering wheel axles for excellent
maneauvrability.
The 2-pt headstock allows a turning angle up to
90º.
22
Andex 323 353 393 423 423T 433 463 693 VARIO 693 EVO
Dimensions/weights
Working width (m) 3.20 3.50 3.90 4.20 4.20 4.30 4.60 6.90/7.70 6.90
Working width (ft) (10’6”) (11’6”) (12’10”) (13’9”) (13’9”) (14’1”) (15’1”) (22’8”/25’3”) (22’8”)
Transport width (m/ft) 1.60 (5’3”) 1.75 (5’9”) 1.75 (5’9”) 1.75 (5’9”) 2.00(6’7”) 2.10 (6’11”) 2.15 (7’1”) 2.85 (9’4”) 2.85 (9’4”)
Transport length (m/ft) 3.10 (10’2”) 3.35 (11’) 3.60 (11’10”) 3.15 (10’4”) 3.90 (12’10”) 3.85 (12’8”) 3.35 (11’) 8.05 (26’5”) 8.05 (26’5”)
Transport height (m) - - - - - - - 3.15/4.00 3.15/4.00
Transport height (ft) - - - - - - - (10’4”/13’1”) (10’4”/13’1”)
Weight (kg) 320 420 460 610 540 500 660 1900 1700
Weight (lb) (665) (928) (1014) (1344) (1190) (1115) (1463) (4189) (5575)
Swath width (m)
Swath width (ft)
Capacity theo. (ha/h) 3.5 3.9 4.3 4.6 4.6 4.7 5.1 7.6 7.6
Hitching system
Pivoting 3-pt headstock (cat.) 1/2 1/2 1/2 2 - 1/2 2 - -
Lower links (2-pt.) - - - - - - - - -
Linkage drawbar - - - - • - - • •
Gauge wheel 16° o o o o o o o o o
Rotors/Tine arms/Tines
Rotor diameter (m) 2.60 2.80 3.05 3.35 3.35 3.35 3.65 3.35 3.35
Rotor diameter (ft) (8’6”) (9’2”) (10’0”) (11’) (11’) (11’) (12’) (11’) (11’)
Swath delivery left left left left left left left 1-2x left left
Number of rotors 1 1 1 1 1 1 1 2 2
Number of arms per rotor 9 10 11 12 11 12 13 11/12 11/12
Number of double tines/arm 3 4 4 4 4 4 4 4/5 4/5
Tine diameter (mm) 9 9 9 10 9 9 10 9 9
Continuous cam track - - - • - - • - -
Detachable tine arms • • • • • • • - -
Height adjustment ack rail mech. mech. hydr. mech. mech. hydr. mech. mech.
Wheels and axles
Tyre (rotors) 15x6.00-6 6 16x6.50-8 16x6.50-8 16x6.50-8 18x8.50-8 16x6.50-8 16x6.50-8 16x6.50-8 16x6.50-8
Fixed tandem axle o o o • • o • • •
Pivoting tandem axle - - - o - - o - -
Stand. tyres (carrying frame) - - - - - - - - -
Opt. tyres (carrying frame) - - - - - - - - -
Optional equipment
Carrier arm compensating o o o • - o • - -
Locking catch for slopes o o o • - o • - -
Tyres - - - - - - - - -
Safety accessories
Warning panels o o o o o o o • •
Road lights o o o o o o o • •
• = standard o = optional - = not available * = double swath
Technical Specifications
23
713T VARIO 713T EVO 633 703 763 773 783 843 1103 1503
6.60/7.10* 6.60/7.10 6.30 7.00 7.00/7.80 7.70/8.40* 7.00-7.80 7.60-8.40 9.60-10.90 9.50/15.00
(21’8”23’4) (21’8”23’4) (20’8”) (23’) (23’/25’7”) (25’3”/27’7”) (23”-25’7”) (24’11”-27’7”) (31’6”-35’9”) (31’2”/49’3”)
3.00 (9’10”) 3.00 (9’10”) 2.85 (9’4”) 2.85 (9’4”) 2.85(9’4”) 2.85 (9’4”) 2.85 (9’4”) 2.85 (9’4”) 2.85 (9’4”) 3.00 (9’10”)
7.50 (24’7”) 7.50 (24’7”) 5.80 (19’) 5.80 (19’) 5.80(19’) 8.90 (29’2”) 5.80 (19’) 6.10 (20’) 7.20 (23’7”) 9.20 (30’2”)
- - 4.00 3.45/4.15 3.45/4.15 3.20/4.00 3.99/4.15 3.30/4.00 3.85/5.00 3.45/4.00
- - (13’1”) (11’4”/13’7”) (11’4”/13’7”) (10’60”/13’1”) (13’1”/13’7”) (10’10”/13’1”) (12’8”/16’5”) (11’4”/13’1”)
1400 1390 1520 1640 1640 2220 1750 1850 2865 5700
(3086) (3351) (3316) (3316) (4894) (3858) (3750) 6316) (12566)
1.30 1.30 1.20-1.90 1.30-1.90 1.40-2.10 1.40-2.70
(4’3”) (4’3”) (3’11”-6’3”) (4’3”-6’3”) (4’7”-6’11”) (4’7”-8’10”)
7.3 7.3 6.9 7.7 8.4 8.5 8.6 9.2 12 16
- - - - - - - - - -
- - 2 2 2 2 2 2 2 2
• • - - - - - - - -
• • - - - - - - - -
3.00 3.00 3.00 3.35 3.35 3.65 3.35 3.65 4.55 3.85
(9’10”) (9’10”) (9’10”) (11’) (11’) (11’4”/12’) (11’) (12’) (14’11”) (12’8”)
1-2x left 1x2x left centre centre centre 1-2x left centre centre centre centre
2 2 2 2 2 2 2 2 2 4
11/12 11/12 2x11 2x11 2x11 2x12 2x11 2x12 2x15 13/15
4 4 4 4 4 4/5 4 4 4 4/5
9 9 9 9 9 10 10 10 10 10
- - - - - • • • • •
• • - o o • • • • •
mech. mech. mech. mech. mech. mech. mech. mech. mech.•/elec. o mech.•
18.5x8.50-8 18.5x8.50-8 16x6.50-8 16x6.50-8 16x6.50-8 16x6.50-8 16x6.50-8 16x6.50-8 16x6.50-8 16x6.50-8
o o TerraLink TerraLink TerraLink TerraLink TerraLink TerraLink Terra Terra
- - Quattro Quattro Quattro Quattro Quattro Quattro Contact Contact
- - 10.0/75-15.3 10.0/75-15.3 10.0/75-15.3 11.5/80-15.3 11.5/80-15.3 11.5/80-15.3 11.5/80-15.3 500/50-17
- - - - - - - - - 550/45-22.5
- - - - - - - - - -
- - - - - - - - - -
- - - - - - - - 380/55-17 550/45-22.5
• • • • • • • • • •
• • • • • • • • • •
Information provided in this brochure is made for general information purposes only and for worldwide circulation. Inaccuracies, errors or omissions may occur and the information may thus not constitute basis for any legal claim against Kverneland Group. Availability of models, specifi cations and optional equipment may differ from country to country. Please consult your local dealer. Kverneland Group reserves the right at any time to make changes to the design or specifi cations shown or described, to add or remove features, without any notice or obligations. Safety devices may have been removed from the machines for illustration purposes only, in order to better present functions of the machines. To avoid risk of injury, safety devices must never be removed. If removal of safety devices is necessary, e.g. for maintenance purpose, please contact proper assistance or supervision of a technical assistant. © Kverneland Group Gottmadingen N.V.
F-1
528
-UK
Kverneland GroupKverneland Group is a leading international company developing, producing and distributing agricultural machinery and services.
Strong focus on innovation allows us to provide a unique and broad product range with high quality. Kverneland Group offers an extensive package of systems and solutions to the profes-sional farming community. The offering covers soil preparation, seeding, forage- and bale equipment, spreading and spraying.
KR
OG
AG
ER
09.2
009
Original Spare PartsKverneland Group spare parts are designed to give reliable, safe and optimal machinery performance - whilst ensuring a low cost life-cycle. High quality standards are achieved by using innovative production methods and patented processes in all our production sites.
Kverneland Group has a very professional network of partners to support you with service, technical knowledge and genuine parts. To assist our partners, we provide high quality spare parts and an effi cient spare parts distribution worldwide.
Kverneland Group UK Ltd.Walkers Lane, Lea Green, St. HelensMerseyside, WA9 4AFPhone + 44 1744 8532 00
Kverneland Group Ireland Ltd.Hebron Industrial EstateKilkenny, IrelandPhone + 353 56 51597
Kverneland Group USA5908, Butternut Drive, East Syracuse (New York)13057, USAPhone + 1 315 431 3501
www.vicon.eu