1

Andover Continuum

PA-00210 Andover Continuum and Pelco Video Compatibility Matrix

Software and Pelco VideoCompatibility MatrixVersions 1.7 through 1.9

CyberStation / web.Client Software Version

1.7x/1.8 1.81 1.82 1.9

VideoMon1

Add-on softwareVideo

Layouts2Video

Layouts2Video

Layouts2Video

Monitor3Video

Layouts2Video

Monitor4

Pelco Video Management System

DVX9 v3.1 v3.1 v3.1 v3.1 v3.1 v3.1

DVXi9 v4.3.1.90 v4.3.1.90 v4.3.1.90 v4.3.1.90 v4.3.1.90 v4.3.1.90

Digital Sentry

• DS RealVue v4.2 v4.2 v4.2 v4.2

• DS NVR/NVS v4.2 v4.2 v4.2 v4.2

• DS Enterprise v4.2 v4.2

• DS VAU v4.2 v4.2

• DS4U

• DS SRV

Endura v1.x5

Endura v2.05

Cameras

IP Cameras n n

Sarix Cameras6

Andover Continuum Incoming Video System Alarms7

Intrinsic Alarms7 n n n n

Alarming using controller objects7

nor = supported in Andover Continuum software

= available as an add-on software = not supported

Note: Viewing video via the Andover Continuum software interfaces requires different/additional machine resources than workstations and machines that do not use video functionality. Refer to the corresponding Andover Continuum software installation guides for each version (e.g. v1.92, v1.93) for hardware and software requirements to properly support video functionality. The information on these charts is furnished for informational purposes only, is subject to change without notice, and should not be construed as a commitment by Schneider Electric.

1. VideoMon Add-On software is not part of the core Andover Continuum software; it is add-on software supported by the SEBB Americas region (not PSS).

2. Video Layouts functionality is supported both on CyberStation workstations and web.Client browsers.

3. Video Monitor (and Video Administrator used to configure it) is a paid add-on option (in v1.82) to CyberStation (per workstation) and is not supported on web.Client.

4. Video Monitor (and Video Administrator used to configure it) is a standard feature in CyberStation (as of v1.9) and is not supported on web.Client.

5. Endura support requires a paid add-on option to CyberStation (per workstation) and web.Client (per server).

6. Sarix cameras should be configured to use stream 2 at lower resolutions for best machine performance.

7. Only the following video alarms are supported: 1) video server online/offline, 2) camera video loss, and 3) motion detection (per camera).

8. DVX and DVXi do not support video loss and motion alarm functionality.

9.Obsolete Pelco Products

The products listed in the chart below and on the next page are the only video products that can be integrated using Andover Continuum’s video features. Products not listed are not supported in Andover Continuum video features. The Pelco component versions listed in this document are the tested and supported revisions per Andover Continuum software version.

2

Andover Continuum

PA-00210 Andover Continuum and Pelco Video Compatibility Matrix

Software and Pelco VideoCompatibility MatrixVersions 1.91 through 1.94

CyberStation / web.Client Software Version

1.91 1.91 withDSConneX Patch 1.92/.93 1.94

VideoLayouts2

VideoMonitor4

VideoLayouts2

VideoMonitor4

VideoLayouts2

VideoMonitor4

VideoLayouts2

VideoMonitor4

Pelco Video Management System

DVX9 v3.1 v3.1 v3.1 v3.1 v3.1 v3.1 v3.1 v3.1

DVXi9 v4.3.1.90 v4.3.1.90 v4.3.1.90 v4.3.1.90 v4.3.1.90 v4.3.1.90 v4.3.1.90 v4.3.1.90

Digital Sentry

• DS RealVue v4.2 v4.2 v4.2,v7.0 v4.2,v7.0 v4.2,v7.0, v7.1

v4.2,v7.0, v7.1 v7.2.30 v7.2.30

• DS NVR/NVS v4.2 v4.2 v4.2,v7.0 v4.2,v7.0 v4.2,v7.0, v7.1

v4.2,v7.0, v7.1 v7.2.30 v7.2.30

• DS Enterprise v4.2 v4.2 v4.2,v7.0 v4.2,v7.0 v4.2,v7.0, v7.1

v4.2,v7.0, v7.1 v7.2.30 v7.2.30

• DS VAU v4.2 v4.2 v4.2,v7.0 v4.2,v7.0 v4.2,v7.0, v7.1

v4.2,v7.0, v7.1 v7.2.30 v7.2.30

• DS4U v4.2 v4.2 v4.2,v7.0 v4.2,v7.0 v4.2,v7.0, v7.1

v4.2,v7.0, v7.1 v7.3.54 v7.3.54

• DS SRV v7.3.54

Endura v1.x5 See pg.3 See pg.3 See pg.3 See pg.3 See pg.3

Endura v2.05 See pg.3 See pg.3 See pg.3 See pg.3 See pg.3

Cameras

IP Cameras n n n n

Sarix Cameras6 1.6.13.xxxx 1.6 and 1.7

Andover Continuum Incoming Video System Alarms7

Intrinsic Alarms7 n n n n

Alarming using controller objects7

n n

nor = supported in Andover Continuum software

= available as an add-on software = not supported

Note: Viewing video via the Andover Continuum software interfaces requires different/additional machine resources than workstations and machines that do not use video functionality. Refer to the corresponding Andover Continuum software installation guides for each version (e.g. v1.92, v1.93) for hardware and software requirements to properly support video functionality. The information on these charts is furnished for informational purposes only, is subject to change without notice, and should not be construed as a commitment by Schneider Electric.

1. VideoMon Add-On software is not part of the core Andover Continuum software; it is add-on software supported by the SEBB Americas region (not PSS).

2. Video Layouts functionality is supported both on CyberStation workstations and web.Client browsers.

3. Video Monitor (and Video Administrator used to configure it) is a paid add-on option (in v1.82) to CyberStation (per workstation) and is not supported on web.Client.

4. Video Monitor (and Video Administrator used to configure it) is a standard feature in CyberStation (as of v1.9) and is not supported on web.Client.

5. Endura support requires a paid add-on option to CyberStation (per workstation) and web.Client (per server).

6. Sarix cameras should be configured to use stream 2 at lower resolutions for best machine performance.

7. Only the following video alarms are supported: 1) video server online/offline, 2) camera video loss, and 3) motion detection (per camera).

8. DVX and DVXi do not support video loss and motion alarm functionality.

9.Obsolete Pelco Products

3

Andover Continuum

PA-00210 Andover Continuum and Pelco Video Compatibility Matrix

Andover Continuum Video Interfaces Video Layouts Introduced in v1.7, allow users to view live video and search (and view) recorded video in a matrix format (up to a 3x3 matrix). Video Layouts can be launched to display live video upon an alarm event.

Note: Video Layouts are supported in CyberStation machines and in web.Client browsers.

Video Monitor Introduced in v1.82, allows users to simultaneously view live and recorded video associated with Andover Continuum points (e.g. doors, outputs) upon an alarm event. Up to 16 cameras can be assigned to each object; only one camera can be viewed at a time.

Note: Video Monitor (& Video Administrator used to configure it) is not supported in web.Client; it is only supported on CyberStation workstations.

Viewing video through a web page is possible but is not a core feature of Andover Continuum software. HTM file samples (for particular software version) are available on the Buildings Business Extranet Global website.

Browse to Products -> Andover Continuum -> Software -> Sample HTM page for Video

GeneralBecause Pelco Digital Sentry and Endura are different systems with different integration methods, some video functionality with Andover Continuum may vary between systems.

Pelco video system versions must be successfully tested with Andover Continuum versions for video integration support.

• Pelco release of a new version does not automatically ensure compatibility with Andover Continuum; it must be formally tested by Andover Continuum

Sarix camerasFor Pelco Endura, Andover Continuum defaults to stream 2 for video. If stream 2 is not available, then Andover Continuum will revert to stream 1. However, note this does impact machine resources. Refer to the Andover Continuum software installation guides for machine requirements per revision.

Cameras TestedAnalog, IP (including Sarix cameras) were tested through both Digital Sentry and Endura systems to verify compatibility with Andover Continuum. The following table includes the sample IP and Sarix cameras tested (including revision).

Note: Only Andover Continuum software v1.92 and greater support Sarix cameras.

Pelco VideoManagement

System

Supported video

formats

Digital SentryMJPG, MPEG4,

H.264Endura MPEG4, H.264

Sarix camera models

Software version tested for 1.94

IXE10C 1.7.41.9081IXE10DN 1.74.9081

IM10DN10 1.7.41.8263IMS0LW10 1.8.1.8270

IEE10N 1.7.41.8111IXS0LW 1.8.1.9083IX30C 1.7.41.9080

Spectra IV IP 1.02.0015Spectra IV IP H.264 1.7.41.2084

IP110 1.02.0015IP3701 1.02.0015

CamerasTested version with Andover Continuum

v1.92 & v1.93

Tested version with Andover Continuum

v1.94IP 3701 camera 1.00.0026 1.02.0015Spectra IV IP Camera 1.01.0052 1.02.0015Sarix Cameras 1.6.13.xxxx

Supported Video Formats

Refer to the list of the tested Sarix Cameras to the right.

4

Andover Continuum

PA-00210 Andover Continuum and Pelco Video Compatibility Matrix

Compatible Endura components (including versions) per Andover Continuum software revision:Specific versions of Pelco Endura components have been tested for compatibility Andover Continuum software. The following versions (for the products below) are required for compatibility per Andover Continuum software revision:

CyberStation / web.Client Software Version

v1.91 v1.92 / v1.93 v1.94

Pelco Endura Component

SM5000 System Manager 1.04.0027 1.04.0036 1.4.69.492

WS5000 1.05.0046 2.03.00.9084 2.05.03.10245

WS5070 - - 2.05.03.10245

NSM5200 2.00.01.xxxx 2.1.3.0120 2.1.5.0001

NET5301T single channel encoder 1.03.1054 1.03.2061 1.03.2061

NET53XX 8/16 channel encoder 1.4.0419 1.4.0041 1.4.0041

DVR5100 1.04.3044 1.05.3035 1.05.3035

DVR5300 1.04.4014 1.04.4014 1.04.4014

ENC5316 encoder (for DVR5300) 1.4.0412 1.4.0421 1.4.0421

NVR5100 1.04.4014 1.04.4109 2.13.0120

Endura Express - 1.01.00.0051 1.01.01.0004

UDI5000 - 1.0.2.0005 1.0.2.0307

Note: Only Endura-enabled components are compatible with Andover Continuum software – e.g. the DVR5100 must be Endura-enabled to be supported.

You may need to upgrade the software in your Pelco devices for successful integration with Andover Continuum. Software upgrades are available from Pelco.

The information on these charts is furnished for informational purposes only, is subject to change without notice, and should not be construed as a commitment by Schneider Electric.

April 2012

Schneider Electric Jägershillgatan 213 75 Malmö, Sweden Telephone: +46 (40) 38 68 50 www.schneider-electric.com

© 2

012

Sch

neid

er E

lect

ric. A

ll rig

hts

rese

rved

.

All brand names, trademarks and registered trademarks are the property of their respective owners. Information contained within this document is subject to change without notice.