1

ANM2017 (www.anm2017.com)

19-21 July 2017, Reitoria, University of Aveiro, Portugal

Program at a glance

Hours 19 July 2017 20 July 2017 21 July 2017

9.00-10.00 Registration Registration Registration

9.30-10.00 Coffee session Coffee session Coffee session

10.00-10.15 Welcome address - -

10.00-13.00 Invited & Oral presentations

Invited & Oral presentations

Invited & Oral presentations

13.00-14.00 Lunch Lunch Lunch

14.00-16.00 Invited/Oral presentations

Invited/Oral presentations

Invited/Oral presentations

16.00-18.00 Poster presentations & Coffee session

Poster presentations & Coffee session

Coffee session

18.00 - - Aveiro city tour & Boat trip (The experience will be complemented with a Welcome Drink and tasting of the well known Aveiro regional sweet - Ovos Moles)

18.30

- Banquet (Montebelo Vista Alegre Ílhavo Hotel) (Bus will start from the conference Venue to the Banquet Venue)

-

Contents

Sessions Page No

Oral ANM 2

Oral APM 4

Oral HE 6

Oral SEM 8

Oral AGM 8

Oral AMM 9

Poster APM 10

Poster HE 12

Poster SEM 13

Poster ANM 13

Poster AGM 15

Poster AMM 16

2

Oral- ANM (Advanced Nano Materials ) - (Auditorium, University of Aveiro)

Program Chairs: Nivas Babu Selvaraj, Pukazh Selvan, Catarina Dias, Ana Rondão

19th July 2017

Session Chairs: Joao Campos Gil, Carmen Rangel, Joao Pedro Araújo

Time Name Title

10.00-10.15 Joao Campos Gil Welcome message

10.15-10.30 F.Carsughi (Plenary) NFFA-Europe: enhancing European competitiveness in

nanoscience research and innovation

10.30-11.00 Tito Trindade

(Invited)

Surface modified magnetic nanoparticles: a new class of

sorbents for water pollutants of distinct nature

11.00-11.20 Bahman Anvari Erythrocyte-Derived Optical Nanoparticles as Theranostic

Agents

11.20-11.40 Eleonora Pargoletti Tailored MnO2 Nanorods as Highly Efficient Materials for

Methyl Orange Adsorption/Degradation

11.40-12.00 Ioan Baldea A Novel Route to Get Functionality in Nanoelectronics: ..

12.00-12.20 Martín López García Photosynthetic photonic structures in plants, a playground for

light harvesting technologies

12.20-12.40 Alaa Almansoori Plasma Treatment of Nanoclays for use in Nanocomposites

Laser Sintering

13.00-14.00 Lunch

Session Chairs: Ioan Baldea, Martín López García

14.00-14.30 Marinella Striccoli

(Invited)

Colloidal Nanocrystals based Advanced Nanocomposite

Materials

14.30-14.50 Ilenia Rossetti Nanostructured photocatalysts for the photooxidation of

ammonia and photoreduction of nitrates from waste waters

14.50-15.10 Marino Brčić Influence of imperfections on double walled carbon nanotube

mechanical properties

15.10-15.30 Keisuke Sato Cell performances of inorganic/organic hybrid solar cells

using silicon nanoparticles

20th July 2017

Session Chairs: Marinella Striccoli, Marino Brčić

10.00-10.30 Henrique Gomes

(Invited)

Advanced electronic materials for ultrasensitive bioelectronic

devices

10.30-11.00 Luiz Pereira (Invited) New generation of high efficient OLED: the use of TADF

materials

11.00-11.20 Kaushik Mallick Citrate stabilized solvothermal synthesis of stannous sulfide

for supercapacitor application

3

11.20-11.40 Olivier Siri New tricks from an old dog in nanomaterials: quinoids after

130 years

11.40-12.00 Paula Obreja Influence of surface substrates on the properties of ZnO

nanowires synthesized by hydrothermal method

12.00-12.20 Filomena Piscitelli Hydrophobic coatings for aeronautical applications

12.20-12.40 Maria-Beatrice

Coltelli

Preparation of water suspensions of nano-calcite for cultural

heritage applications

13.00-14.00 Lunch

Session Chairs: Olivier Siri, Kaushik Mallick

14.00-14.30 Luís Cadillon Costa

(Invited)

Materials electrical characterization: from DC to microwave

frequencies

14.30-14.50 Catarina Dias Effect of the voltage-polarity on the resistive switching of

Pt/MgO/Ta/Ru nanostructures

14.50-15.10 Libor Kvitek Size Depended Catalytic Activity of Gold Nanoparticles

15.10-15.30 Wun-Fan Li First Principles Study of the Stability and Electronic Structure

of 2D Monolayered Transition Metal Oxides

15.30-15.50 Jaya Madan Gate Drain Underlapping: A Performance Enhancer for HD-

GAA-TFET

21st July 2017

Session Chairs: Henrique Leonel Gomes, Sabina Cherneva

10.00-10.30 Leonard Francis

(Invited)

Advanced Electron Microscopic Techniques towards the

Understanding of Metal Nanoparticles and Clusters

10.30-10.50 Shi Shikao (Invited) Self-rising Preparation, Structure and Photoluminescence of

Eu3+ -Activated La2Ce2O7 Composite Nanopowders

10.50-11.10 Martin Grönke Synthesis of α-RuCl3 crystals on the nanoscale via chemical

vapour transport (CVT)

11.10-11.30 Darko Makovec Exchange-Coupled Nanoplatelets Composed of a Hexaferrite

Core in between Two Maghemite Layers

11.30-11.50 Mostapha

Dakhchoune

Ultrahigh Flux Gas-Selective Nanoporous Carbon Membranes

11.50-12.10 Henika Arora Impact on Analog and Linearity performance of nanoscale

AlGaN/GaN HEMT with variation in surface passivation

stack

12.10-12.30 Neena S John Films of Multifunctional Reduced Graphene Oxide Based

Metal and Metal Oxide Nanostructures by Interfacial Reaction

12.30-13.00 Jae Su Yu (Invited) Metal-oxide Nanomaterials and Nanostructures for Energy

Harvesting Technologies

13.00-14.00 Lunch

Session Chairs: Neena S John, Luiz Pereira, Jae Su Yu

14.00-14.30 Svitlana Kopyl

(Invited)

Self-assembled diphenylalanine microtubes: emerging

properties and applications

14.30-14.50 Sabina Cherneva Investigation of mechanical properties of electrochemically

deposited on stainless steel OC404 substrate--

4

14.50-15.10 Donglu Shi Magnetic hyperthermia of iron oxide nanoparticles for

biomedical applications

15.10-15.30 Abdul Karim Shah Tungstophosphoric Acid Supported Montmorillonite Solid

Acid Catalyst for Citronellal Cyclisation

15.30-15.50 I.V. Sukhorukova Design and characterization of DOX-loaded BN nanocarrier

for tumor therapy

15.50-16.10 Sedigheh

Joughehdoust

In vitro Study and Surface Modification of Alumina Scaffolds

by Thermally Crosslined Poly(ε-caprolactone fumarate)-

16.10-16.30 A. Zhukeshov The powders and coatings produced by pulsed arc plasma

accelerator

Oral- APM (Advanced Polymer Materials) - Room A- Reitoria, U. of Aveiro

Program Chairs: Ajay Kaushal, Budhendra Kumar Singh, João Grilo

19th July 2017

Session Chairs: Bartosz Tylkowski, Yusuke Hiejima, Nilay Tuccar Kilic

Time Name Title

10.30-11.00 Antonios Kelarakis

(Invited)

Current trends in Polymer Nanocomposites

11.00-11.20 Giuseppe Cappelletti Tailored-Made Fluorinated Methacrylic Coatings for Marble

Protection

11.20-11.40 Kyungkon Kim Stable bulk heterojunction prepared by sequential deposition

of polymer and fullerene layer

11.40-12.00 Myung Han Yoon Crystalline Polymer-Based Conductive Cell Culture Platform

for Direct Electrical Interfaces

12.00-12.20 Andrey Sybachin Self-assembly of anionic liposomes on cationic polymer

particles

12.20-12.40 Sergio Torres-Giner Improving the mechanical & thermal performance of green

composites by reactive extrusion with multi-functionalized

vegetable oils

12.40-13.00 Jun Seong Yun PPO based ion exchange hybrid membranes containing ion

exchange nanoparticles for the application of desalination

13.00-14.00 Lunch

Session Chairs: Giuseppe Cappelletti, Sergio Torres-Giner

14.00-14.20 Emmanuel Beyou Functionalization of Graphite Oxide Sheets with polymer

chains and Their Uses in polymer-based Nanocomposites

14.20-14.40 Bartosz Tylkowski Photo-triggered microcapsules

14.40-15.00 Yusuke Hiejima Deformation of polyethylene solids probed by rheo-Raman

spectroscopy

15.00-15.20 Nilay TUCCAR

KILIC

Compatibilization of PLA/PBAT Blends with Epoxy-POSS

Nanoparticles: “Effect of PBAT Molecular Weight”

15.20-15.40 Elena Kozhunova Synthesis of amphiphilic copolymers based on acrylic acid--

in organic, aqueous–organic & aqueous media via RAFT

polymerization

15.40-16.00 Oluwagbenga Fatile Synthesis and Characterization of Epoxy Matrix

Nanocomposites Reinforced with Zinc Oxide Nanoparticles

5

20th July 2107

Session Chairs: Andrey Sybachin, Sergiy Minko

10.00-10.30 Philip LeDuc (Invited) A Biosensing Soft Robot: Integrating Chemical and Optical

Responsive Synthetic Cells with Soft Robotics

10.30-10.50 Teresa Esteves Mimicking DNA alkylation in organic solvent with an

adenine functional polymer for genotoxins removal from

pharmaceuticals

10.50-11.10 Dmitrii Rusakov High Porosity Macroporous Polyetheretherketone

11.10-11.30 Patrick Steindl Stronger than they look: Foamed Epoxy Resins

11.30-11.50 Leandro Gonçalves Sulfonation of Styrene–co–EGDMA gels

11.50-12.10 Seunghwan Lee A Comparative Study of Polycations vs. Positively Charged

Nanoparticles in Complexation with Mucins

12.10-12.30 Jie Tang The Control of Crystallization Behavior of Nylon 6/66

Copolymer by In-Situ Copolymerization

12.30-12.50 Gisèle Boiteux Structure and electrophysical properties of composites with

ordered distribution of carbon nanofillers in polymer matrix

13.00-14.00 Lunch

Session Chairs: Teresa Esteves, Emmanuel Beyou

14.00-14.20 Bernabe L. Rivas Functional polymers and nanocomposites to remove inorganic

pollutants

14.20-14.40 Sergiy Minko Thermostable Polymer-Enzyme Conjugates

14.40-15.00 Chaobo Song Bilayer PCL /PLGA membrane fabricated in supercritical

CO2 for GBR

15.00-15.20 Alaa Almansoori Plasma Treated Polyamide 12 with High Hydrophilicity

15.20-15.40 Przemyslaw Sowinski Nucleation of crystallization of isotactic polypropylene in the

gamma form under high pressure

15.40-16.00 Dler Jameel Electrical properties of sulfonated polyaniline (SPAN)/GaAs

hybrid heterostructures grown on (100) and (311)B GaAs

planes

21st July 2017

Session Chairs: Ognen Pop-Georgievski, Roman Turczyn

10.00-10.30 Mikhail Zolotukhin

(Invited)

Metal-free, well-defined multifunctional aromatic polymers

for advanced macro-and nano-technologies

10.30-10.50 Ada Saccà Nano-crystalline Yttria-Stabilised Zirconia as filler for Proton

Exchange Membranes (PEM) in fuel cells

10.50-11.10 Daniela Correia Poly(vinylidene fluoride)/ionic liquid electrospun fibers and

microspheres for tissue engineering applications

11.10-11.30 José Javier Relinque Study of the effect of filling ABS with conductive additives to

obtain filaments for Fused Deposition Modeling in 3D

printing

11.30-11.50 Jivago Nunes Development of a polymer based capacitive screen printed

touchpad

11.50-12.10 Byeol-Nim Lee Synthesis of imidazolium containing Poly(ether ether ketone)

and effect of imidazolium cation moiety on gas permeability

6

12.10-12.30 Carlo Naddeo Infrared Investigation of Photodegradation of Polypropylene

Filled with Multiwalled Carbon Nanotubes

13.00-14.00 Lunch

Session Chairs: José Javier Relinque, Elby Titus

14.00-14.30 Cihui Liu (Invited) Tunable structural color surfaces with visually self-reporting

wettability

14.30-14.50 Joao Maia Graphene Oxide-Based Thermoplastic Polyurethane

Nanocomposites

14.50-15.10 D. H. Turkenburg Various Diels-Alder adduct based thermo-reversible polymers

and their applications

15.10-15.30 Ognen Pop-

Georgievski

Non-fouling Polymer Brushes at the Nanoscale

15.30-15.50 Roman Turczyn Spectroscopic Evaluation of Structural Changes in Composite

Materials Subjected to Self-Heating Effect

Oral- HE (Hydrogen Energy) - Room C- Reitoria, University of Aveiro Program Chairs: Yang Tao, Devaraj Ramasamy, Vanessa Graça

19th July 2017

Session Chairs: Ilenia Rossetti, Ilgi Karapinar

Time Name Title

10.30-11.00 Fernando Marques

(invited)

Performance of Composite Electrolyte Membranes for Energy

Conversion

11.00-11.20 Daniel De Wolf Time development of new hydrogen transmission networks:

new results

11.20-11.40 Xueying Yang Three-demensional Ni-Co-NiCo2O4/NF Nanosheets as Effcient

Electrocatalysts for the Hydrogen Evolution Reaction

11.40-12.00 Felipe Sánchez CNFs-supported Pd series catalysts comparison for hydrogen

evolution from additive-free formic acid decomposition

12.00-12.20 Zhen-Yan Deng Effect of Storage Environment on the Reaction Activity of Al

with Water

12.20-12.40 Mateusz Balcerzak Influence of Co content on the microstructure and hydrogen

storage properties of mechanically alloyed Ti-V alloy

13.00-14.00 Lunch

Session Chairs: Daniel De Wolf, Zhen-Yan Deng, Mateusz Balcerzak

14.00-14.20 Ilenia Rossetti Kinetic modelling and process simulation for H2 production by

steam reforming of diluted bioethanol solutions

14.20-14.40 Guiling Wang Three-demensional porous carbon framework based one-

demensional nanostructured polyaniline nanowires

14.40-15.00 Karolina Kordek Simple electrochemical modification of the carbon cloth for

high performance self-supported overall water splitting

electrode

15.00-15.20 Davide Motta Experimental and computational studies on the catalytic

pathways of hydrous hydrazine decomposition

15.20-15.40 Ilgi Karapinar Effect of HRT on Biohydrogen Production from Hydrolyzed

Waste Wheat By Dark Fermentation

7

20th July 2017

Session Chairs: Raúl Molina, Carolina Herradón , Lee Choong-Gon

14.00-14.20 Patrick Da Costa Natural clay based nickel catalysts for dry reforming of

methane: On the effect of the different promoters

14.20-14.40 Maria Elena Galvez-

Parruca

Biogas dry reforming on Ni-containing hydrotalcite-derived

nano-oxides

14.40-15.00 Dhanesh Chandra Atom Dynamics and Structural Studies of Amorphous Materials

(Ni0.60Nb0.4)100-xZrx (x=0 to 30)

15.00-15.20 Jun Yao Zeolite supported Pd electrocatalyst nano-particle

characterization

15.20-15.40 Ebru Çokay Hydrogen gas production from metal plating wastewater by

electrohydrolysis

21st July 2017

Session Chairs: Patrick Da Costa, Jun Yao, Maria Elena Galvez-Parruca

10.00-10.20 Kaushik Mallick Affirmative role of ZnO towards the electrooxidation of

methanol

10.20-10.40 Lee Choong-Gon Relationship of Electrolyte Amount and Cell Performance in a

Molten Carbonate Fuel Cell

10.40-11.00 Juan A. Botas Experimental assessment of the cyclability and exergy

efficiency of the Mn2O3/MnO thermochemical cycle

11.00-11.20 Raúl Molina H2 production by water splitting with Mn-Co mixed oxides

thermochemical cycles

11.20-11.40 Yanan Yin Bio-hydrogen production by immobilized novel strain

Clostridium butyricum INET1

11.40-12.00 Ashish Nadar Molybdenum Carbide Dispersed on Carbon: A Viable

Nanoelectrocatalyst for Hydrogen Evolution Reaction.

12.00-12.20 Sushma Rawool Investigations on Photocatalytic Properties of C@TiO2

Composites with Varying Carbon Content

13.00-14.00 Lunch

Session Chairs: Felipe Sánchez, Davide Motta, Ebru Çokay

14.00-14.20 Hassnain Abbas

Khan

Sulfuric acid decomposition over Thiol-stabilized one pot

Pt/SBA-15 catalyst:

14.20-14.40 Hye-yeong Lee Effect of PEG Additive in Electrode on the Performance of

PEMFC

14.40-15.00 Hoyoung Kim Development of Non-precious Catalysts for Acidic Hydrogen

Evolution Reaction using Electrodeposition

15.00-15.20 Hyanjoo Park Pt-based Alloy Catalysts for High Temperature PEMFC

Cathode

15.20-15.40 Jimmy Romanos Nanoporous Graphene Monolith for Hydrogen Storage

15.40-16.00 Byeol-Nim Lee Synthesis of imidazole group containing poly ether ether ketone

for anion exchange membrane fuel cells

16.00-16.20 Aitana Tamayo CO2/H2O thermochemical splitting on porous SiOC/LSMO

nanocomposites

8

Oral- SEM ( Solar Energy Materials) - Room C - Reitoria, University of Aveiro

Program Chairs: Yang Tao, Devaraj Ramasamy, Vanessa Graça

20th July 2017

Session Chairs: Joao Campos Gil, Carmen Rangel

Time Name Title

10.00-10.20 Hélène ARENA Carbide nanocomposite TiC –SiC for bulk solar absorbers

applications

10.20-10.40 Thirawudh

Pongfprayoon

Conductive and water dispersible carbon nanotube for dye-

sensitisized solar cell

10.40-11.00 Veronica Braza New growth approaches to improve the performance in

GaAsSbN-based solar cells

11.00-11.20 Madjid Sarvghad Corrosion of Stainless Steel 316 in Molten Salts for Thermal

Energy Storage

11.20-11.40 Nisha Deopa Photoluminescence study of Eu3+ doped lithium lead alumino

borate glasses for solar cell applications

11.40-12.00 Abbas AL-Rjoub A Novel design of selective solar absorbance for high

temperature applications

12.00-12.20 Rahul Pandey Rear Contact Silicon Solar Cell with SiC Based Front Surface

Passivation for Ultraviolet Radiation Stability

12.20-12.40 Quantao Liu Effect of Thermal Properties Evolution of Asphalt Concrete on

Long Term Performance of Asphalt Solar Collector

Oral- AGM (Advanced Graphene Materials) - Room B- Reitoria

Program Chairs: E..Lora Da Silva, Mario Santos

20th July 2017

Session Chairs: Florent Bourquard, Vera Marinova, Maxim Chichkov

Time Name Title

10.00-10.30 Anna Baldycheva

(Invited)

2D Material Liquid Crystal Nanocomposites for Reconfigurable

Integrated Optoelectronics and Si Photonics

10.30-10.50 Igor Luzinov Scalable manufacturing of the highly conductive reduced

graphene oxide monolayer

10.50-11.10 Rasa Pauliukaite Electrochemical characterization of graphene synthesized with

various reducing agents for application in supercapacitor

11.10-11.30 Adriana Marinoiu Iodine-doped Graphene –Catalyst Layer in PEM Fuel Cells

11.30-11.50 Nevill Gonzalez

Szwacki

Will borophene outperform graphene?

11.50-12.10 Yury Stebunov SPR Analysis of Antibody-Antigen Interaction using Graphene

Oxide Linking Layers

12.10-12.30 E.M. Sheregii HgCdTE alloys as Natural 3D analog of Graphene

12.30-12.50 Kasinath Ojha Multi-Doped Carbon Based Composites for Oxygen Reduction

Reactions

9

21st July 2017

Session Chairs: Rasa Pauliukaite, Elena Lacatus

14.00-14.30 Diana Fernandes

(Invited)

Carbon-based nanomaterials for electrocatalysis

14.30-14.50 Vera Marinova Graphene based liquid crystals hybrid devices

14.50-15.10 Christoph Testud Dynamic properties of GO from femtosecond infrared and THz

pump probe spectroscopy

15.10-15.30 Krzysztof Gajewski Scanning Tunneling Potentiometry studies of 2D materials and

Pt:C composites

15.30-15.50 Maxim Chichkov Characterization of few-layer graphene grown by CVD on Cu

foil

15.50-16.10 Florent Bourquard Highly pyridinic N-doped Graphene Synthesized by Ultrashort

Pulsed-Laser Deposition and Thermal Annealing

Oral- AMM (Advanced Magnetic Materials & Spintronics ) - Room B- Reitoria

Program Chairs: E..Lora Da Silva, Mario Santos

20th July 2017

Session Chairs: Alex Trukhanov, José Miguel Mesquita Teixeira, Lesley Cohen

14.00-14.30 In-Sang Yang Raman Study of Spin Waves in Hexagonal HoMn1-xGaxO3

14.30-14.50 Natalia Kovaleva Collective High-Field Magnetization Response of Nanoisland

FeNi Films

14.50-15.10 Jacek Polit Bioimaging with CdCoS Quantum Dots Conjugated With

Human Serum Albumin

15.10-15.30 Gunther Hennrich Nano-structured Bisarylacetylene Materials for Magneto-optics

15.30-15.50 Malika Yakhlef Dynamics Modeling and Simulation of Magneto mechanical

Properties of the Non Oriented Fe-Si 3% Sheets

15.50-16.10 Hamedi Naima Precipitation during the Nitiding in Fe-Cr-C Steels

21st July 2017

Session Chairs: Jacek Polit, Gunther Hennrich, In-Sang Yang

10.30-11.00 Lesley Cohen

(Invited)

Manganese Antiperovskites for Antiferromagnetic Spintronics

11.00-11.20 Alex Trukhanov Anomalous microwave properties of the diamagnetically doped

hexagonal ferrites

11.20-11.40 José Miguel Teixeira Micromagnetic Simulations of Magnetization Reversal

Processes in Diameter Modulated Ni and Co Nanowires

11.40-12.00 Rasha Ghunaim Magnetic nanoparticles-filled Carbon nanotubes as potential

thermo-seed for Hyperthermia

12.00-12.20 Vanessa Cardoso Microfluidic technology as efficient strategy for the automated

and effective cleaning of magnetic entities

10

Posters - APM (Advanced Polymer Materials)- 19th July 2017

Poster No Name Title

APM-01 Raul Quijada Study of Barrier Properties of Nanocomposites based on Graphene

Derivatives and two Polymer Matrices

APM-02 Gabriele

Milani

Combined Experimental and Numerical Investigation on NR-PB Rubber

Blends

APM-03 Álvaro

Montero

Polymer modified sulfonated PEEK ionomers membanes for H2/O2 fuel

cells

APM-04 Hyeon-Jin Seo Study of Micropatterned Film with a Polystyrene patterning via Plasma-

Enhanced Chemical Vapor Deposition

APM-05 Jung-Hoon Yu VO2/PVP/Cellulose Based Hybrid Composites for Flexible

Thermochromic Smart Films with Enhanced Uniformity and Optical

Switching Properties

APM-06 Takumitsu

Kida

In-situ Raman spectroscopic study of the effects of molecular weight

and molecular weight distribution on tensile deformation of HDPE

APM-07 Sergio Torres-

Giner

Development of environmentally friendly thermosetting resins by means

of naturally occurring and chemically modified halloysite nanotubes

APM-08 Andrey

Sybachin

Water-soluble magnetic nanocomposites of polysacharide and iron oxide

(3+)

APM-09 Pavel Bazant Preparation of antibacterial polymer composites by Ag-ZnO hybrid

nanoparticles

APM-10 Itziar Velaz TiO2 Nanoparticles Containing α- and β-Cyclodextrins and Sorbic acid.

Release Studies

APM-11 Manoela A

Prado

The influence of synthetic Ni-talc on properties of waterborne based

polyurethane nanocomposites

APM-12 Álvaro

Montero

Analysis of methods to determine free ion diffusivity and charge

concentration on composite polymers containing lithium salts in

supported ionic liquid-like phases (SILLPs)

APM-13 Vanessa

Cardoso

Magnetic and nonmagnetic composites for biotechnological applications

APM-14 Sandesh Pai Fe(II) Metallo-Supramolecular Polymers Self-Assembled from 2,6-

Bis(2- Pyridyl)Pyrimidine as Active Electrochromic Materials

APM-15 Juliana

Oliveira

Environmentally-friendly polymer-based printable devices for indirect

X-ray detection

APM-16 Juliana

Oliveira

A new polymer binder for high performance printable lithium-ion

battery anodes

APM-17 Violeta

Popescu

Salicylic Acid as Potential Cross-linking Agent for Gelatin-Based

Hydrogel

APM-18 José Javier

Relinque

Enhancing properties of polymeric matrices by inclusion of

nanoadditives

APM-19 José Javier

Relinque

Characterisation of Al-acrylic resin composites suitable for its use in

Stereolithography

APM-20 Jivago Nunes Printable piezoresistive sensor matrix for interactive and biomedical

applications

11

APM-21 Amilton M.

Santos

Synthesis and characterization of poly(N-vinilcaprolactam)

homopolymers comprising carboxylic, hydroxyl, bromide and azide end

groups

APM-22 Amilton M.

Santos

Organic/Inorganic Hybrid Colloidal Particles by RAFT-Mediated

Emulsion Polymerization

APM-23 Anastasia

Dobreikina

Advanced Biomimetic Gels with Chemical and Physical Interpenetrating

Networks

APM-24 Jun Seong Yun Preparation and characterization of ion exchange composite membrane

for the application of desalination

APM-25 Sang Yong

Nam

CO2/N2 separation using Poly(ether ether ketone) membranes based on

functionalized ionic liquid

APM-26 Arantza

Zornoza

Interaction of Methylparaben with Tetronic T904

APM-27 Marioara

Moldovan

The structure, properties and susceptibility of the nanocomposites with

graphene oxide, used in dentistry

APM-28 Ouezna

Hamouma

Flexible Paper@MWCNT@Polypyrrole composites for chemo-resistive

gas sensing

APM-29 Carmela

Scudieri

A novel compact supercapacitor based on PVDF_HFP/NiMoS2 aerogel

APM-30 Codruta Sarosi Mechanical properties of orthodontic cements with graphene oxide

nanofillers

APM-31 Amilton M.

Santos

Evaluation of in vitro ketoprofen controlled release behavior from

chitosan/poly(NVCL-co-IA-co-EGDMA)-based microparticles

APM-32 Gisèle Boiteux Electroactive organic-inorganic polymer system based on thermoset and

thermoplastic oligomers and lithium perchlorate salt

APM-33 Claudio

Terraza

Silicon-containing lineal and rigid poly(azomethine)s. Synthesis and

characterization

APM-34 Claudio

Terraza

Silylated poly(azomethine)s derived from aromatic dialdehydes and

diamines containing biphenyl moieties. Synthesis and characterization

APM-35 Leandro G

Aguiar

Specific Surface Prediction through Copolymerization Kinetic Modeling

APM-36 Mohammed

Alshammari

Comparison of cyclic and polymeric disulfides as catalysts for the

regioselective chlorination of phenols

APM-37 ItziarVélaz Effect of the presence of TiO2 nanoparticles on the Structure,

Morphology and Bacterial growth behaviour of Polylactic acid- TiO2

nanocomposites

APM-38 Nivas Babu

Selvaraj

Properties of KNN/PVDF composites synthesized via immersion

precipitation

APM-39 Nivas Babu

Selvaraj

PVDF-Cu nanocomposites prepared via immersion precipitation

APM-40 Alexandra

Carvalho

Hybrid Silica-Cellulose Acetate Membrane Thickness by Unilateral

NMR Sensor

APM-41 Zeinab El-

Moussawi

Low Band Gap Near-IR Conjugated Copolymer Based on Dithienosilole

and Pyridalthiadiazole for enhanced Voc in OPV Cells

APM-42 Alexandru

Mihai

Grumezescu

MAPLE Fabricated Hydroxyapatite-Magnetite Nanoparticles Coatings

Used for the Stimulation of Fixation at the Bone-Implant Interface

APM-43 Atieh Aghajani Preparation of new functionalized gold NPs as elementary bricks

towards hybrid electrode materials for applications in catalysis

12

Posters - HE (Hydrogen Energy)- 19th July 2017

Poster

No

Name Title

HE-01 Lyuba Ilieva

Gencheva

Alumina supported Au/Y-doped ceria catalysts for pure hydrogen

production

HE-02 Yang Tao DFT+U study for the explanation of the physio-chemical properties of

Pr2O2SO4

HE-03 Ligang Lin Effective desulfuration from fuel based on pervaporation process

coupled with membrane absorber for sulfur-free hydrogen source

HE-04 Maria J. Rivero Enhanced Photocatalytic Hydrogen Production over TiO2/Graphene

Oxide Catalyst

HE-05 Poliana Bezerra

Silva

Experimental Evaluation of Hydrogen Tracer over Ni/γ-Al2O3 Catalyst

in Catalytic Trickle-Bed Reactor

HE-06 Patrick Da

Costa

Hydrogen production from dry methane reforming over KIT-6 modified

with Ni and Y

HE-07 Leandro

Rodríguez

Hybrid Nafion –metallic oxides membranes for intermediate

temperature PEM single cell

HE-08 Lopez Federico Functionalization and deposition of Pd on carbonaceous substrates

HE-09 Jong-Lam Lee MoS2-coated CuO Nanowires for H2 Production using

Photoelectrochemical Water Splitting

HE-10 Byeol-Nim Lee Preparation and Characterization of imidazolium functionalized

poly(ether ether ketone) anion exchange membranes for alkaline fuel

cell

HE-11 Sudhakaran M S

P

SrNiO3 perovskite catalyst for dry reforming of propane with

heterogeneous support to produce syngas

HE-12 Eleonora

Ponticorvo

Continuous flow HER evaluation of a new Pt-Pd/Co nano-

electrocatalyst

HE-13 Ana Filipa

Ferreira

Training in the field of hydrogen & Fuel cell technologies

HE-14 Billel

Boumaaraf

Photovoltaic- Wind Renewable Energy System Connected to Grid Using

Multilevel Inverter

HE-15 Kyung-Ran

Hwang

Catalytic Steam Reforming of Biomass-derived Acetic Acid for

Sustainable Hydrogen Production

HE-16 In-Gu Lee Hydrogen Production by Steam Reforming of Glycerol over Ni-

Y/activated charcoal

HE-17 D. Pukazshelvan Effect of Mg2TiO4 and MgTiO3 additives on the hydrogen storage

behavior of MgH2

HE-18 D. Pukazshelvan Feasibility analysis on the synthesis of CH4 from CO2 and H2 in a

protonic solid oxide electrolyzer

HE-19 Devaraj

Ramasamy

New buffer layer for improved performance of SOFC cathode

HE-20 Devaraj

Ramasamy

Surface morphology of thin film preparation at high sintering

temperature

13

Posters - SEM (Solar Energy Materials)- 19th July 2017

Poster No Name Title

SEM-01 Daniela

Correia

Printable photovoltaic systems based on Cu(In,Ga)Se2 chalcopyrite

SEM-02 Taeho Moon Lead Acetate Based Hybrid Perovskite through Hot Casting for Planar

Heterojunction Solar Cells

SEM-03 Dong-Won

Kang

Carbon-nanotube Assisted Hybrid Hole Transport Layer for Efficient

Planar Perovskite Solar Cells

SEM-04 Nadia

BENREGUIA

Electrochemical and Photoelectrochemical Characterization of CuCrO2

synthesized by sol-gel method

SEM-05 Marta Sousa Enhanced SnS Phase Purity of Films Produced by Rapid Thermal

Processing of SnS2-x Precursors

SEM-06 Billel

Boumaaraf

Maximizing the Overall Energy Output with an Experimental Model

Validation of a Spiral Hybrid--

SEM-07 Billel

Boumaaraf

Theoretical and experimental study of a serpentine hybrid PV/T collector

with an adapted--

SEM-08 Sung-Min

Youn

Front surface field formation by functional p-NiO layer for CIGS thin

film photovoltaics

SEM-09 Hyeong Jun

Kim

Graphene Electrodes-based CIGS Solar Cells for Large Active Area

SEM-10 Da Hye Jeong Large area post deposition treatment of flexible CIGS thin film solar cells

Posters- ANM (Advanced Nano Materials)- 20th July 2017

Poster

No.

Name Title

ANM-01 El Montassir

Dahmane

Preparation and evaluation of Chloramphenicol-loaded chitosan

nanoparticles for anti-microbial drug delivery

ANM-02 Gianguido Ramis Nanostructured materials for the valorization of (waste) organic

solutions and CO2 recycle for fuels ..

ANM-03 El Montassir

Dahmane

Physicochemical properties of α-chitin whiskers-reinforced chitosan

nanocomposite films

ANM-04 D.I. Tishkevich New approach of electrochemical formation of nanostructured Al2O3

membranes

ANM-05 Karolina Kordek Simple synthesis of highly luminescent carbon quantum dots from a

waste precursor and optical properties ..

ANM-06 Libor Kobera Solid State NMR Study of Fe-ions in Nanostructured

Aluminosilicates during Sorption of Anions

ANM-07 Cátia Rodrigues Triboelectric Driven Turbine to Generate Electricity from the Motion

of Water

ANM-08 Ana Gomes Study and Optimization of a Triboelectric Nanogenerator to Harvest

Energy from Walking

ANM-09 Tatiana Kozlova Formation and study of Ta and Mo nanocluster films for highly

efficient thermoelectric materials development

ANM-10 César Saldías In situ obtained copper-chitosan/fluorescein film and hydrogel

nanocomposites and their catalytic performance

14

ANM-11 V.V. Fetisov Мiniature Radioisotope Thermoelectric Power Supply

ANM-12 Dulat Omirbekov Obtaining of superhydrophobic surface in RF capacitively coupled

discharge in AR/CH4 medium

ANM-13 Dulat Omirbekov The influence of gas temperature on formation and growth of the dust

nanoparticles in Ar/CH4 medium

ANM-14 Jung-Hoon Yu Porous NiO/TiO2 Nanobowl Composite Hybrid Electrochromic

Devices with Enhanced Optical Modulation

ANM-15 Jiri Brus Enhanced ion dynamic and site-specific interactions in

MIL53(Al)@[LiCobisdicarbollide] MOF designed for Li-batteries

ANM-16 Jou-Hyeon Ahn Sulfurized polyacrylonitrile nanofibers for high performance lithium

sulfur batteries

ANM-17 Dimitre Z.

Dimitrov

Inverted Pyramids Nanostructured Silicon

ANM-18 Hanna Maltanava Synthesis of ZnO mesoporous powders and their application in dye

photodegradation

ANM-19 Hanna Maltanava Sol-gel template synthesis of mesoporous titania powder with

photocatalytic activity under visible light

ANM-20 Renata Jastrzab Preparation and stabilization of silver nanocolloids reduced by D-

glucose used as active antibacterial materials

ANM-21 Renata Jastrzab Preparation and characterization of long-term stable SERS active

materials as potential supports for medical diagnostic

ANM-22 Marcia Escote Transport properties of NdNiO3 nanowires

ANM-23 Yerassyl Yerlanuly Obtaining of Carbon Nanomaterials by PECVD Method

ANM-24 Yerassyl Yerlanuly Influence of dispersion of catalytic carrier for growth mechanism of

carbon nanotubes

ANM-25 Lei Wang Fabrication-resolution enhancement method based on low-energy

multiple exposures

ANM-26 D. W. Kang Nitric Oxide Post-deposition Annealing of Atomic Layer Deposited

SiO2 on 4H-SiC

ANM-27 Martina Urbanova Structure &dynamics of alginate beads crosslinked by different

polyvalent ions as seen by Solid-state NMR spect..

ANM-28 João Paulo de F.

Grilo

Sintering of nano Ce0.9Gd0.1O1.95 powders with alkali carbonates

ANM-29 A.I.B. Rondão Effect of Nanosized Dispersed Phases on the Behavior of Mg-

Partially Stabilized Zirconia

ANM-30 Luca Rimoldi The role played by the catalyst physicochemical features on guaiacol

hydrodeoxygenation

ANM-31 Sedigheh

Joughehdous

Synthesis of Bio-Active Glass by Sol-gel Method and Using Spark

Plasma Sintering (SPS) for Forming Process

ANM-32 Hae Kyung Jeong Graphite Oxide, CNT, and Activated Carbon Composites for Energy

Storage Device

ANM-33 Heeyeon Kim CVD synthesis of hybrid nano-catalysts for fuel cell electrode

ANM-34 Mónica Cerquido DC potentiostatic electrodeposition of gold-mushrooms in micro-

holes

ANM-35 Soo Hyun Lee Synthesis and Characterizations of Eu3+-doped SrMoxW1-xO4 red-

emitting phosphors

ANM-36 Gregor Meller Simulation of Injection Currents into Disordered Molecular

Conductors

15

ANM-37 Dong-Kwon Kim Electrodeposition-Fabricated Pt Alloy Catalysts for Hydrogen

Oxidation Reaction in High Temperature PEMFC

ANM-38 Fatima Mousli Spontaneous grafting of RuO2-TiO2 mixed oxide nano-photocatalyst

with diazonium salts

ANM-39 Grzegorz Adamek Titanium based foams prepared by hybrid method: thermal dealloying

process combined with space holder technique

ANM-40 Zhassulan

Nakysbekov

Influence of low power electron irradiation on the structure of copper

nanopowder

ANM-41 Dan Eduard

Mihaiescu

Hybrid multilayer nanomaterials using Fe3O4 magnetic core-shell

nanoparticles as support

ANM-42 Sang Soon Hwang An Experimental Investigation of Combustion Synthesis of SiO2

Nanoparticles Using the Premixed Flat Burner

ANM-43 Sandra Alice

Buteică

Nanostructured silica/plant extract nanomaterials with modified

release behavior. In vivo biocompatibility

ANM-44 Halina Garbacz Biological behavior of titanium processed by severe plastic

deformation

ANM-45 Kun Luo Au/MWNT Nanocomposite as an Efficient Oxygen Reduction

Reaction Catalyst

ANM-46 Houa Hammache Study of NiO electrochemical deposition mechanism

ANM-47 L. Makhloufi Electrochemical deposition of nanostructured cuprous oxide thin film

on aluminium substrate

ANM-48 Lijian Meng Optical and structural properties of nanostructural bismuth oxide films

prepared by rf reactive magnetron sputtering

ANM-49 Neda Neykova Study of ZnO nanorods grown under UV irradiation

ANM-50 SeonJu Kim Enhanced light extraction from OLED using high refractive index

mesh

ANM-51 Nicoleta Cioatera Wet-chemical syntheses of nanocrystalline nickel tungstate

ANM-52 Vicente Sánchez E Characterization of a mesoporous gamma-al2o3 catalyst: influence of

their properties on ethanol conversion

ANM-53 Soohyun Hwang Fabrication of CZTS nanocrystal suitable for photo-sintering effect

ANM-54 Meder Kamalov N-terminal residues impact the morphology of biomimetic silaffin

silica particles

ANM-55 Alina Maria

Holban

Magnetite nanoparticles as efficient nanoshuttles for the delivery of

antimicrobial natural volatile compounds

ANM-56 Valentina

Grumezescu

Bioactive polymeric coatings obtained by advanced laser technique to

inhibit microbial colonization

Posters- AGM (Advanced Graphene Materials)- 20th July 2017

Poster

No.

Name Title

AGM 01 Rajat Biswas Fano resonances in electron transmission through a pair of delta

function magnetic barriers in graphene ..

AGM 02 E. Lora da Silva Translational Symmetry Breaking of Bilayer Graphene Systems

AGM 03 Chandana Sinha Electron transmission through a rectangular graphene magnetic

barrier modulated by an oscillating electric field

16

AGM 04 Eudésio O. Vila Graphene Monolayer Evaluation for Lithium Ion Battery

Development

AGM 05 Maria Grazia

Musolino

Synthesis and characterization of metal oxides /graphene oxide

nanocomposites..

AGM 06 Aleksey Arsenin Graphene Oxide Linking Layers for Highly Sensitive SPR

Biosensing of Small Molecules

AGM 07 Mario C. Santos Effects of Geometric Deformation in Graphene

AGM 08 Cong Wang Tuning the optical and electrical properties of ReSe2 by nanoscale

strain engineering

AGM 09 Elena Lacatus Analysis and Models of 3D Fabrication Techniques of Graphene

Based Functionalized Nanostructured Materials

AGM 10 Jaehyeong Lee A Novel Reduction Method of Graphene Oxide Thin Films by

Intensive Pulse Light

AGM 11 Gwang Wee Yoo Optimization of Laser Scribing Process for Shingled Solar

Cell Interconnection

Posters - AMM (Advanced Magnetic Materials & Spintronics) -20th July 2017

Poster No. Name Title

AMM-01 Ali Bentouaf Structural, electronic and magnetic properties of new series

quaternary Heusler alloy Co2VSi0.5Ga0.5 : Ab initio Study

AMM-02 Miguel M. Dias Remotely Activated Thermal Switch Based on Magnetic Nanofluids

AMM-03 Oracio Navarro Effects of anti-site defects in doped Sr2FeMoO6: First principle

calculations

AMM-04 Oracio Navarro Electronic correlation effects on the Curie temperature in double

perovskites

AMM-05 Leandro Martins Perpendicular magnetic anisotropy in MgO-CoFeB nanostructures:

effect of the annealing treatment in the magnetic properties

AMM-06 Jacek Polit Growth of Zn1-xNixO diluted magnetic semiconductor thin films

and their structural and optical properties

AMM-07 Chayada

Surawanitkun

Temperature Dependence of Magnetic Properties on Switching

Energy in Magnetic Tunnel Junction Devices with Tilted

Magnetization

AMM-08 Iosif Malaescu Temperature and magnetic field effect on the thermal and

rheological behaviour of the magnetic fluids

AMM-09 Simona Gabriela

Muntean

Fe3O4/Ag/C Nanocomposites: Synthesis, Characterization and

Evaluation of Adsorption Capacity

AMM-10 El-abbas

Endaisha

Computational investigations of spin-orbit coupling on electronic

properties for specific heusler compounds

AMM-11 Sílvio Meneses Magnetoresistance due to pinned uncompensated magnetization in

IrMn

AMM-12 Joana C. Matos Synthesis and characterization of SPIONs for biomedicine