ANNAMACHARYA INSTITUTE OF TECHNOLOGY & SCIENCES::RAJAMPET(AN AUTONOMOUS INSTITUTION)

DEPARTMENT OF MECHANICAL ENGINEERING6th BOS MINUTES: 2015-2016

Date:05-06-2015

The minutes of BOS held at 11:00 AM on Friday 05-06-2015 at institute premises AITS,Rajampet.

Agenda:

Conversion of I B.Tech year pattern to Semester pattern.

Discussion to finalize the syllabus of II,III&IV B.Tech syllabus of Mechanicalengineering R15 regulation.

Revisions if any observed in syllabus.

Incorporation of PPC Module of ERP for M.Tech – CAD/CAM & M.Tech (MachineDesign).

Any other item with the permission of chair.

Members of BOS:

1. Prof N.Sivarami reddy Chairman

Professor & Head, _ Present.

Dept.of ME,

AITS, Rajampet.

2. Sri M Maruthi Prasad Member

Associate Professor, _ Present.

Dept.of ME,

AITS, Rajampet.

3.Sri H. Suresh Babu Rao Member

Assistant Professor, _ Present.

Dept.of ME,

AITS, Rajampet.

4. Dr G. Krishnaiah University Nominee

Assistant Professor, _ Present.

Professor

Dept. of ME,

AITS, Tirupati

5. Prof G.Jayachandra reddy Subject Expert

Principal, YSRCE of Yogivemana university _ Present

Proddutur

6. Prof P. Madar Valli,

Professor,

Dept of ME, AITS Rajampet

Prof N Siva Rami Reddy, Head of the department, Department of MechanicalEngineering & chairman of the Board of Studies welcomed the members. All the members alsointroduced themselves before the starting of the meeting.

After the Discussion the following resolutions are made

The committee went through the coarse structure, scheme of instructions and syllabi for I,II, III & IV B.Tech Mechanical Engineering programe R-15 Regulations as enclosed inANNEXURE-I

PPC Moduel of ERP is suggested for M.Tech –CAD/CAM & M.Tech –Machine Design.

Conversion of 1st year B.Tech in to semester system from yearly pattern. Finalized the syllabi for B.Tech-courses based on the inputs from the Department

advisory Board as enclosed in Annexure II.

Engineering mechanics is revised and divided in to Engineering mechanics- Statics-5G511 & Engineering mechanics-Dynamics-5G521.

Engineering graphics is revised and divided in to Engineering graphics-1(5G512)&Engineering graphics-2 (5G522).

Conclude to introduce new courses as enclosed.

New Courses:

English through literature 5GC11

Engineering Mathematics -I 5GC14Problem solving techniques and introduction to Cprogramming

5G111

Engineering mechanics -Statics 5G511

Engineering Graphics-I 5G512

Problem solving through C lab 5GC13

Technical English 5GC21

Engineering Mathematics -II 5GC24

C Programming and Data structures 5G121

Engineering mechanics -Dynamics 5G521

Engineering Graphics-II 5G522

Engineering Mathematics -III 5GC31

Machine Dynamics lab 5G568

Gas turbines and jet propulsion 5G578

Total Quality Management 5G57D

Integrated Product development 5G57E

Turbo Machinery 5G581

MOOCs NIL

Prof.N.Sivarami Reddy

Chairman

ANNEXURE –I

ANNAMACHARYA INSTITUTE OF TECHNOLOGY & SCIENCES::RAJAMPET(AN AUTONOMOUS INSTITUTION)

DEPARTMENT OF MECHANICAL ENGINEERINGRegulations :R15 Programme Code: G5

I Year B. Tech., I Semester

SubjectCode

Subject NameHours /Week C

L T P5GC11 English through Literature 2 1 0 25GC12 Engineering Chemistry 4 1 0 45GC14 Engineering Mathematics-I 3 1 0 35G111 Problem solving techniques and introduction to C Programming 3 1 0 35G511 Engineering Mechanics - Statics 3 1 0 35G512 Engineering Graphics –I 2 -- 6 55GC16 ELCS Lab-I -- -- 3 25GC17 Engineering Chemistry Lab -- -- 3 25G113 Problem solving through C Lab -- -- 3 25G514 Engineering workshop -- -- 3 2

Total 17 5 18 28

I Year B. Tech., II Semester

SubjectCode

Subject NameHours /Week C

L T P5GC21 Technical English 2 1 0 25GC23 Engineering Physics 4 1 0 45GC24 Engineering Mathematics-II 3 1 0 35G121 C programming and Data Structures 3 1 0 35G521 Engineering Mechanics - Dynamics 3 1 0 35G522 Engineering Graphics –II 2 -- 6 55GC26 ELCS Lab-II -- -- 3 25GC28 Engineering Physics Lab -- -- 3 25G123 Programming in C and Data structures Lab -- -- 3 25G124 IT Workshop -- -- 3 2

Total 17 5 18 28

Note: L - Lecture; T-Tutorial; P – Practical; C – Credits

ANNAMACHARYA INSTITUTE OF TECHNOLOGY & SCIENCES::RAJAMPET

(AN AUTONOMOUS INSTITUTION)DEPARTMENT OF MECHANICAL ENGINEERING

Regulations :R15Programme Code: G5

II Year B. Tech., I SemesterSubject

CodeSubject Name

Hours / WeekC

L T P5GC31 Engineering Mathematics -III 3 1 0 35G531 Mechanics of Solids 3 1 0 35G532 Metallurgy & Material Science 3 1 0 35G533 Basic Thermodynamics 3 1 0 35G534 Manufacturing Technology 3 1 0 35G535 Machine Drawing# 2 -- 6 35GC35 Aptitude And Reasoning Skills 2 -- 0 25G536 Manufacturing Technology Lab 0 -- 3/2 25G537 Material Science Lab and Mechanics of Solids Lab* 0 -- 3/2 2

Sports & Extension Activities -- -- 1 0Total 24 05 7/4 24

NOTE:*The Students will attend the Material Science lab and Mechanics of Solids lab in alternate weekthat is 3/2 per week.#The End exam for Machine Drawing will be for 4 hrs in the following format.All questions are to be answeredQ1: Questions set on section I & II of the syllabus 2 out of 3 or 2 out of 4 to be answered with a

weightage of 4 marks each – 08 marksQ2: Questions set on Section II of the syllabus 2 out of 3 to be answered with a weightage of 10

marks each – 20 marksQ3: Drawing of assembled views of Section III items of Syllabus with a weightage of 42 marks.

Note that, all answers should be on the drawing sheet only. Answers on the drawing sheetonly will be valued.

II Year B. Tech., II SemesterSubject

CodeSubject Name

Hours / WeekC

L T P5GC42 Probability and Statistics 3 1 0 35GC43 Environmental Science 3 1 0 35G245 Electrical and Electronics Engineering 3 1 0 35G541 Applied Thermodynamics - I 3 1 0 35G542 Fluid Mechanics and Hydraulic Machinery 3 1 0 35G543 Kinematics of Machinery 3 1 0 35G249 Electrical and Electronics Engineering lab* 0 -- 3 25G544 Fluid Mechanics and Hydraulic Machines Lab 0 -- 3 25G545 Seminar – I 0 -- 2 2

Total 24 05 08 24

Note: L - Lecture; T-Tutorial; P – Practical; C – Credits* The Students will attend the Electrical Engineering lab and Electronics Engineering lab in

alternate week that is 3/2 per week.

ANNAMACHARYA INSTITUTE OF TECHNOLOGY & SCIENCES::RAJAMPET(AN AUTONOMOUS INSTITUTION)

DEPARTMENT OF MECHANICAL ENGINEERINGRegulations :R15

Programme Code: G5III Year B. Tech., I Semester

SubjectCode

Subject NameHours / Week

CL T P

5GA51 Managerial Economics and Financial Analysis 3 1 0 35G551 Applied Thermodynamics - II 3 1 0 35G552 Dynamics of Machinery 3 1 0 35G553 Machine tools 3 1 0 35G554 Design of Machine Elements-I 3 1 0 35G555 Heat Transfer 3 1 0 35GC52 English For Competitive Examinations 2 -- 0 25G556 Heat Transfer Lab 0 -- 3 25G557 Thermal Engineering Lab 0 -- 3 2

AUDITCOURSE

Professional Ethics / Stress Management 2 -- -- 0

Total 28 05 06 24

III Year B. Tech., II SemesterSubject

CodeSubject Name

Hours / WeekC

L T P5G561 Instrumentation and control systems 3 1 0 35G562 CAD/CAM 3 1 0 35G563 Metrology and Surface Engineering 3 1 0 35G564 Applied Thermodynamics-III 3 1 0 35G565 Design of Machine Elements-II 3 1 0 35G566 Industrial Management 3 -- 0 35G567 Metrology Lab and Machine Tools Lab 0 -- 3/2 25G568 Machine dynamics lab 0 -- 3 25G569 Seminar – II 0 -- 2 2

AUDITCOURSE

Advanced English Communications skills Laboratory -- -- 3 0

Total 26 05 11/2 24

Note: L - Lecture; T-Tutorial; P – Practical; C – Credits

ANNAMACHARYA INSTITUTE OF TECHNOLOGY & SCIENCES::RAJAMPET

(AN AUTONOMOUS INSTITUTION)DEPARTMENT OF MECHANICAL ENGINEERING

Regulations :R15Programme Code: G5

IV Year B. Tech., I SemesterSubject

CodeSubject Name

Hours / WeekC

L T P5G571 Operations Research 3 1 0 35G572 Automobile Engineering 3 1 0 35G573 Finite Element Methods 3 1 0 3

Open Elective 3 1 0 3PROFESSIONAL ELECTIVE –I 3 1 0 3

5G574 Tribology5G575 Advanced Manufacturing Systems5G576 Automation and Robotics

PROFESSIONALELECTIVE –II 3 1 0 35G577 Un conventional Machining process5G578 Gas turbines and jet propulsion5G579 Rapid Prototyping

5G57AInstrumentation lab and optimization lab with MATLABsoftware

0 -- 3 2

5G57B CAD/CAM Lab 0 -- 3 25G57C Comprehensive Mechanical Engineering 0 -- 3 2

Total 24 06 9 24

LIST OF OPEN ELECTIVE SUBJECTSOffered By

Department of5G679 Disaster Management CE5G27C System Modelling and Simulation EEE

5G57D Total Quality Management ME

5G57E Integrated Product Development ME5G377 Nano Technology and Applications ECE5G378 Medical Instrumentation ECE5G178 .NET Technologies CSE5G47B Cyber Laws IT5GA71 Intellectual Property Rights DBA5GA72 Human Resource Management DBA

IV Year B. Tech., II SemesterSubject

CodeSubject Name

Hours / WeekC

L T PPROFESSIONALELECTIVE III 3 1 0 3

5G581 Turbo-machinery5G582 Computational Fluid Dynamics5G583 Non-Conventional sources of Energy

PROFESSIONALELECTIVE IV 3 1 0 35G584 Power plant engineering5G585 Production and operations management5G586 Supply Chain Management5G587 Seminar – III 0 -- 2 25G588 Project Work 8 8

MOOCs 3Total 8 0 10 19

Note: L - Lecture; T-Tutorial; P – Practical; C – Credits

Annexure II

-'.- -.lJ-

l-l1oo An o^- Fi D -f fL '3,r.--- c^o 1f e*-

ln, k

I

v-1*il,