annual asbestos awareness review -...

30
Olathe Public Schools | Annual Asbestos Awareness Review 1 Annual Asbestos Awareness Review

Upload: doancong

Post on 21-Mar-2018

221 views

Category:

Documents


2 download

TRANSCRIPT

Page 1: Annual Asbestos Awareness Review - …schools.olatheschools.com/buildings/osc/download/asbestos/annual...Olathe Public Schools | Annual Asbestos Awareness Review 1 ... Asbestos deposits

Olathe Public Schools | Annual Asbestos Awareness Review  1 

  

Annual Asbestos

Awareness Review

Page 2: Annual Asbestos Awareness Review - …schools.olatheschools.com/buildings/osc/download/asbestos/annual...Olathe Public Schools | Annual Asbestos Awareness Review 1 ... Asbestos deposits

Olathe Public Schools | Annual Asbestos Awareness Review  2 

  

What is Asbestos? In this section you will learn:

About the 6 types of asbestos. Ancient history of asbestos. Modern history of asbestos.

Asbestos is the name applied to six naturally occurring minerals that are mined from the earth. Unlike other minerals, however, the crystals of asbestos form long, thin fibers. Asbestos deposits are found throughout the world, but the primary sites of commercial asbestos production are Canada, Russia, and South Africa. Commercial mining of asbestos in the United States was halted in the 1980s. Once extracted from the earth, asbestos-containing rock is crushed, milled (or ground), and graded. This produces long, thread-like fibers of material. What appears to the naked eye as a single fiber is actually a bundle of hundreds or thousands of fibers, each of which can be divided even further into tiny fibers (fibrils), invisible without the aid of a microscope. Asbestos materials are divided into two groups -- serpentine and amphibole. Amphibole asbestos fibers are straight and needle-like. Serpentine asbestos fibers are silky in texture, and curly. All asbestos in the serpentine group is called Chrysotile. This is the most common type of asbestos found in buildings in the United States, accounting for approximately 95 percent of the asbestos found in the nation's buildings. It is commonly known as "white asbestos" because of its natural color.

The amphibole group contains five types of asbestos. Amosite, the second most common type of asbestos found in buildings in the United States, is often referred to as "brown asbestos" for the color of the natural mineral. Crocidolite, or "blue asbestos" has been used in high-temperature insulation products and on chemical resistant surfaces, such as laboratory tables for chemistry and biology classes (upon occasion, the custodial staff will drill holes in table tops for new fixtures without realizing that the material may contain crocidolite). The remaining three types of asbestos in the amphibole group -- Anthophyllite, Tremolite, and Actinolite -- are rare and have little commercial value. They are occasionally found as contaminants or minor constituents in asbestos-containing materials.

Mineral asbesto sin moler (crisolito).

Page 3: Annual Asbestos Awareness Review - …schools.olatheschools.com/buildings/osc/download/asbestos/annual...Olathe Public Schools | Annual Asbestos Awareness Review 1 ... Asbestos deposits

Olathe Public Schools | Annual Asbestos Awareness Review  3 

  

Asbestos fibers are also virtually indestructible. They are resistant to chemicals and heat, and they are very stable in the environment. They do not evaporate into air or dissolve in water, and they are not broken down over time. Asbestos is probably the best insulator known to man. Because asbestos has so many useful properties, it has been used in over 3,000 different products. Usually asbestos is mixed with other materials to actually form the products. Floor tiles, for example, may contain only a small percentage of asbestos. Depending on what the product is, the amount of asbestos in asbestos containing materials (ACM) may vary from 1%-100%. Unfortunately, all the characteristics listed above are what makes asbestos a health and environmental problem today.

History of Asbestos Ancient History Asbestos has been used for over 2,000 years. The word asbestos comes from the ancient Greek’s and means "Non burnable." The Greeks admired the "miracle mineral" because of its softness and flexibility and its ability to withstand heat. The Greeks used asbestos much like cotton, spinning and weaving it into cloth.

The non burnable quality of asbestos and its flexibility made it useful for several ancient products.

Below is a short list of ways asbestos was used in ancient times:

Ancient Greeks used asbestos for lamp wicks and blacksmith gloves. Ancient Egyptians used asbestos cloth to prepare bodies for burial. Romans collected ashes of the dead by wrapping bodies in asbestos before cremation. Ancient people believed asbestos cured certain illnesses.

 

 

 

 

 

Asbestos fibers are identified using a microscope.

All types of asbestos tend to break into very tiny fibers. These individual fibers are so small that many must be identified using a microscope. In fact, some individual fibers may be up to 700 times smaller than a human hair. Because asbestos fibers are so small, once released into the air, they may stay suspended there for hours or even days.  

A single asbestos fiber 

Page 4: Annual Asbestos Awareness Review - …schools.olatheschools.com/buildings/osc/download/asbestos/annual...Olathe Public Schools | Annual Asbestos Awareness Review 1 ... Asbestos deposits

Olathe Public Schools | Annual Asbestos Awareness Review  4 

  

The Shroud of Turin (probably discovered in Asia Minor in AD 500’) - was wrapped in an asbestos blanket for protection from fire.

Charlemagne (European Emperor – Middle Ages - Around 800 AD) - had a tablecloth woven from asbestos. He would bet his dinner guests that they couldn’t burn it.

Marco Polo (Around AD 1300 –Italian trader and traveler – 24 year trip to Central Asia & China –Friend of Kublia Kahn) – reported the use of asbestos in gun powder by the Chinese.

Modern History The unique characteristics of asbestos made it perfect for use in machinery during the industrial revolution. Asbestos was not widely available anywhere in the world until the late 1800s, when major deposits were found in Canada. Thereafter, asbestos was used to make thermal insulation for boilers, pipes, and other high temperature applications, and was also used as a fireproofing and reinforcement material. During World Wars I and II, the military used asbestos extensively in ships and other applications. Commercial usages of asbestos in buildings increased greatly thereafter, but growing concerns about the health risks associated with asbestos exposure resulted in a voluntary reduction in the use of asbestos beginning in the 1970s.

Below is a short timeline of the modern use of asbestos.

1800’s – Industrial Revolution – Powerful engines and other large machinery produced intense heat. Asbestos was used as insulation and fire protection.

1870 – Asbestos used to insulate boilers in trains. 1900’s Asbestos use as insulation for steam pipes and boilers in ships. 1930’s and after WWII – Asbestos became a popular construction material in the U.S. It was used for fireproofing, insulation, decorative plaster, and soundproofing.

Half of all multi-story buildings built in the U.S. from 1950-1970 contain some form of asbestos: Cement Products; Acoustical Plaster; Fireproofing; Wallboard; Ceiling Tile; Vinyl Asbestos Floor Tile; Insulation; etc.

Key Points Asbestos is a natural mineral that is mined from the earth. The different types of asbestos are:

Amosite Chrysotile

Tremolite Actinolite

Anthophyllite Crocidolite

Of these six, three are used more commonly. Chrysotile (white) is the most common, but it is not unusual to encounter Amosite (brown / off-white), or Crocidolite (blue) as well. Asbestos breaks down to fibers that are invisible to the naked eye and can float in the air for hours to days. Asbestos fibers are nearly indestructible:

They resist chemicals They resist heat and friction They do not break down over time

 

Page 5: Annual Asbestos Awareness Review - …schools.olatheschools.com/buildings/osc/download/asbestos/annual...Olathe Public Schools | Annual Asbestos Awareness Review 1 ... Asbestos deposits

Olathe Public Schools | Annual Asbestos Awareness Review  5 

  

Where is Asbestos Found? In this section you will learn:

Where asbestos is found The classification of various materials What are the more common materials that contain asbestos The most common ACBM found in Olathe School District Definitions of "Friable" and "Nonfriable"

Asbestos has been used in thousands of products, largely because it is plentiful, readily available, cheap, and strong, does not burn, conducts heat and electricity poorly, and is resistant to chemical corrosion. Products made with asbestos are often referred to as asbestos-containing materials (ACM).

Asbestos proved particularly useful in the construction industry. Building materials that contain asbestos are referred to as asbestos-containing building materials (ACBM). Commercial usage of asbestos products in the construction industry was most common from about 1945 to 1980. Some of the most common uses of ACBM include:

Fireproofing Materials -- Usually spray-applied to steel beams used in construction of multi-story buildings to prevent structural members from warping or collapsing in the event of fire.

Insulation Material -- Usually spray-applied, trowel-applied, or manually installed after being preformed to fit surfaces such as pipes for thermal insulation and condensation control.

Acoustical or soundproofing material – Trowel- or spray-applied. May also be used for decoration. Asbestos was mixed with other materials and sprayed onto ceilings and walls to produce a soft, textured look.

Miscellaneous Materials -- Asbestos has been added to asphalt, vinyl, cement and other materials to make products like roofing felts, exterior siding and roofing shingles, wallboard, pipes for water supply, combustion vents, and flues for waste gases and heat. Fibers in asbestos cement, asphalt, and vinyl materials are usually firmly bound into materials in good condition and typically will be released only if the material is damaged mechanically -- for example through drilling, cutting, grinding, or sanding. In addition, asbestos in roofing shingles and siding exposed to weathering may slowly deteriorate and has the potential to release fibers.

Examples of the more common ACBM found in schools are: floor tiles, 9 inch especially  vinyl base   mastic (adhesive)  roofing materials  gaskets in heating and air-conditioning equipment  ceiling panels and tiles  wallboard  

Page 6: Annual Asbestos Awareness Review - …schools.olatheschools.com/buildings/osc/download/asbestos/annual...Olathe Public Schools | Annual Asbestos Awareness Review 1 ... Asbestos deposits

Olathe Public Schools | Annual Asbestos Awareness Review  6 

  

joint compound   plaster   pipe insulation, boiler insulation, duct-wrap insulation, duct joint tape, and duct vibration dampening cloth 

fireproofing on structural members, fire brick for boilers, and fire doors  acoustical spray-on   cement pipes, and panels  thermal insulating papers 

In the Olathe School District, asbestos is most likely to be found in:

ceiling tiles in buildings built prior to 1981 (very rare)  most 9" floor tiles in buildings built prior to 1981  a few 12" floor tiles in buildings built prior to 1981  insulation around pipes and boilers, and   interiors of fire doors 

Friable vs. Non-friable ACBM Friable ACBM will release fibers into the air more readily than non-friable ACBM. Therefore, the AHERA Rule differentiates between friable and non-friable ACBM. The regulations define friable ACBM as material that may be crumbled, pulverized, or reduced to powder by hand pressure when dry. Undamaged non-friable ACBM should be treated as friable if any action performed on the material will make them friable.

Categories of Asbestos-Containing Building Materials

EPA identifies three categories of ACBM (See the definitions appearing in § 763.83 of the AHERA Rule):

Surfacing Materials -- Interior ACBM that has been sprayed on, troweled on, or otherwise applied to surfaces (structural members, walls, ceilings, etc.) for acoustical, decorative, fireproofing, or other purposes. This includes acoustical plaster, hard plasters (wall or ceiling), fireproofing insulation, spray-applied or blown-in thermal material, joint or patching compound (wall or ceiling), and textured paints or plasters.

Thermal System Insulation -- Insulation used to control heat transfer or prevent condensation on pipes and pipe fittings, boilers, breeching, tanks, ducts, and other parts of hot and cold water systems; heating, ventilation, and air conditioning (HVAC) systems; or other mechanical systems. These insulation materials include pipe lagging, pipe wrap, HVAC duct insulation, block insulation, cements and muds, and a variety of other products such as gaskets and ropes.

Miscellaneous Materials -- Other, mostly non-friable products and materials found on structural components, structural members or fixtures, such as floor tile, ceiling tile, construction mastic for floor and ceiling materials, sheet flooring, fire doors, asbestos cement pipe and board, wallboard, acoustical wall tile, and vibration damping cloth. "Miscellaneous materials" do not include thermal system insulation or surfacing materials.

Page 7: Annual Asbestos Awareness Review - …schools.olatheschools.com/buildings/osc/download/asbestos/annual...Olathe Public Schools | Annual Asbestos Awareness Review 1 ... Asbestos deposits

Olathe Public Schools | Annual Asbestos Awareness Review  7 

  

Buildings that have asbestos-containing materials in them will have that information contained in the district Asbestos Management Plan, located in the Main Office.

Pipe and boiler insulation that contains asbestos will be labeled with identifying

stickers and placards.

Asbestos-containing ceiling tiles will not be labeled or marked. These tiles cannot be differentiated from other tile by visual means - they must be analyzed by a laboratory test.

Key Points This Section introduces some important terms used in the AHERA Rule. You should be especially familiar with the following:

Asbestos-Containing Material (ACM) -- Any material or product that contains more than one percent asbestos.

Asbestos-Containing Building Material (ACBM) -- Surfacing ACM, thermal system insulation ACM, or miscellaneous ACM that is found in or on interior structural members or other parts of a school building.

Friable ACBM -- Material that may be crumbled, pulverized, or reduced to powder by hand pressure when dry. Friable ACBM also includes previously non-friable material when it becomes damaged to the extent that when dry it may be crumbled, pulverized, or reduced to powder by hand pressure.

Non-friable ACBM -- Material that, when dry, may not be crumbled, pulverized, or reduced to powder by hand pressure.

Surfacing ACM -- Interior ACM that has been sprayed on, troweled on, or otherwise applied to surfaces (structural members, walls, ceilings, etc.) for acoustical, decorative, fireproofing, or other purposes.

Thermal System ACM -- Insulation used to control heat transfer or prevent condensation on pipes and pipe fittings, boilers, breeching, tanks, ducts, and other parts of hot and cold water systems; heating, ventilation, and air-conditioning (HVAC) systems; or other mechanical systems.

Miscellaneous ACM -- Other, mostly non-friable, products and materials (found on structural components, structural members or fixtures) such as floor tile, ceiling tile, construction mastic for floor and ceiling materials, sheet flooring, fire doors, asbestos cement pipe and board, wallboard, acoustical wall tile, and vibration damping cloth.

Undamaged non-friable ACBM should be treated as friable if any action performed would render these materials friable. When previously non-friable ACBM becomes damaged to the extent that when dry it may it may be crumbled, pulverized, or reduced to powder by hand pressure, it should be treated as friable.

Page 8: Annual Asbestos Awareness Review - …schools.olatheschools.com/buildings/osc/download/asbestos/annual...Olathe Public Schools | Annual Asbestos Awareness Review 1 ... Asbestos deposits

Olathe Public Schools | Annual Asbestos Awareness Review  8 

  

How is Asbestos Dangerous? In this section you will learn:

Why asbestos is a health threat What is asbestosis What is mesothelioma How asbestos relates to lung cancer.

Health Effects Associated with Asbestos Exposure The health effects associated with asbestos exposure have been studied for many years. Results of these studies show that inhalation (breathing in) of asbestos fibers leads to increased risk of developing several diseases. Exactly why some people develop these diseases remains a mystery, but it has been well demonstrated that most asbestos-related illnesses are dose-response related (i.e., the greater the exposure to airborne asbestos fibers, the greater the risk of developing an illness).

Relative Hazards of Asbestos Exposure Almost daily, we are exposed to some prevailing level of asbestos fibers in buildings or experience some existing level in the outdoor air. Some fibers that are inhaled remain in the lungs. Brief "bursts" of exposure, when added to the background level, increase the potential to cause or trigger the development of an asbestos related disease. These brief bursts of exposure occur in many ways. For example, when a carpenter drills a hole in an asbestos fire door without taking any precautions, an increased amount of asbestos may be released into the air. The more often these bursts of exposure occur, the greater the risk of breathing asbestos fibers. People most at risk for this additional exposure are maintenance and construction workers who work on and disturb asbestos in buildings. This clearly demonstrates the need for an active asbestos policy and an ongoing operations and maintenance (O&M) plan for buildings that contain ACBM. It is important to recognize that the majority of people who have developed diseases because of asbestos exposures are former asbestos workers. These workers were frequently exposed to high levels of asbestos fibers each working day, with little or no protection. Today's asbestos maintenance workers and AHERA-trained asbestos abatement workers are trained to follow specific work practices and wear appropriate protection, including respirators, to minimize the risk of exposure. However, increased risk may occur when a worker who does not use a respirator or follow specific work practices disturbs any ACBM. Respiratory System The effects of asbestos exposure most often involve the lungs. Air breathed into the body passes through the mouth and nose, continuing into the windpipe. The windpipe divides into smaller and smaller tubes that end up in the lungs as air sacs called alveoli. It is in these air sacs that respiration occurs. Oxygen is absorbed into tiny blood vessels (or capillaries), and waste gases, such as carbon dioxide, pass out of the blood and are exhaled.

Page 9: Annual Asbestos Awareness Review - …schools.olatheschools.com/buildings/osc/download/asbestos/annual...Olathe Public Schools | Annual Asbestos Awareness Review 1 ... Asbestos deposits

Olathe Public Schools | Annual Asbestos Awareness Review  9 

  

The body has several mechanisms to "filter" the air it breathes. First, large particles are removed in the nose and mouth. Many smaller particles are caught on the mucus-coated walls of the airway tubes. These airways have "hairy" linings (ciliate cells) that constantly propel mucus upward. Particles caught in the mucus are swept up into the back of the mouth. From here they are swallowed or expelled (spit out). Unfortunately, cigarette smoking temporarily paralyzes these hair-like cells, disabling one of the body's natural defenses against unwanted dust or fibers. Despite natural bodily defenses, some dust particles inevitably reach the tiny air sacs in the lungs. When this occurs, the human immune system dispatches large cells called macrophages to engulf the particles and "digest" them. These cells deposit a coating on the particles and may begin forming scar tissue around them. This is just another natural defense mechanism the body uses against unwanted debris in the lungs.

Asbestos-Related Diseases If the body's defenses fail to control or remove asbestos fibers that enter the lungs, the risk of developing an asbestos-related disease increases. Asbestos-related diseases include asbestosis, lung cancer, mesothelioma, and other cancers.

Asbestosis -- Asbestosis is a disease characterized by lung scarring. It reduces lung elasticity -- the ability to inhale and exhale in response to muscular contractions of the diaphragm -- and makes breathing very difficult. Asbestosis is most common among workers who have been exposed to large amounts of asbestos fibers over a period of time. It is a serious disease and, in those persons exposed to high levels of asbestos, can eventually lead to disability or death. All forms of asbestos are suspected to have the potential to cause asbestosis. Like all diseases associated with asbestos exposure, it may take many years for the disease to show up. The typical latency period for asbestosis is 15 to 30 years. Available data indicate that the frequency of occurrence of asbestosis rises and the disease worsens with increasing dust exposure. The Occupational Safety and Health Administration (OSHA) Asbestos Standards were developed to minimize the incidence of asbestosis among asbestos workers by reducing their exposure to asbestos.

 

 

 

 

 

 

 

    

 

Macróphage of Asbestos Macrophages normally engulf small particles in the lung. Asbestos particles, however, tend to rupture the macrophage on contact, releasing its contents into the surrounding lung tissue. This condition is characteristic of people suffering from asbestosis, a disease caused by the inhalation of asbestos fibers. Since asbestos was used extensively as an insulating material in private homes and public buildings, its removal and subsequent dispersal into the air can cause severe environmental problems for those living and working nearby. The inhalation of asbestos fibers has been linked to lung cancer.

"Macrophage on Asbestos," Microsoft® Encarta® 98 Encyclopedia. © 1993-1997 Microsoft Corporation. All rights reserved.

Page 10: Annual Asbestos Awareness Review - …schools.olatheschools.com/buildings/osc/download/asbestos/annual...Olathe Public Schools | Annual Asbestos Awareness Review 1 ... Asbestos deposits

Olathe Public Schools | Annual Asbestos Awareness Review  10 

  

Lung Cancer – As with asbestosis, there appears to be a dose-response relationship between asbestos exposure and lung cancer. In addition, lung cancer arising from asbestos exposure also has a latency period before development -- typically 30 years or longer. The risk of contracting lung cancer as a result of exposure to asbestos increases if the worker is a cigarette smoker. Cigarette smokers who are exposed to asbestos are over 50 times more likely to develop lung cancer than the normal, non-smoking population. As a result, a program to help workers stop smoking and an asbestos operations and maintenance program will help reduce the risk of lung cancer among asbestos maintenance workers.

Mesothelioma -- Mesothelioma is a cancer that occurs in the chest cavity lining or in the lining of the abdominal (stomach) lining. This type of cancer spreads rapidly and is always fatal. Cases of mesothelioma have been found in people who have had a limited exposure to asbestos. The onset of this disease appears to be independent of smoking behavior but related to dose and to time from first known asbestos exposure. Mesothelioma tends to have a long latency period -- usually 30 to 40 years.

Other Diseases – Several other diseases seem to occur more frequently among people who have been exposed to asbestos. These include cancer of the esophagus, stomach, colon, and pancreas; pleural (fibrous) plaques; pleural thickening; and pleural effusion.

The risks of contracting any of these diseases make it extremely important that asbestos maintenance workers utilize proper work practices and respiratory protection.

Risk Associated with Low Exposure While studies of asbestos workers and laboratory animals clearly reveal that asbestos is hazardous, the risks associated with low-level, non-occupational exposure (i.e., an occupant of a building who is not actually disturbing the asbestos) have not been directly demonstrated. Estimating low-level risks from exposure data is not a straightforward process, and the validity of current methodologies is questionable.

Based on a thorough review of the literature available on the health effects of asbestos, the National Institute for Occupational Safety and Health (NIOSH) has concluded that there is no level below which the risks of contracting an asbestos-related disease are zero. This means that there is no established safe level of exposure to asbestos.

When is Asbestos Dangerous? The most common way for asbestos fibers to enter the body is through breathing. In fact, asbestos containing material is not generally considered to be harmful unless it is releasing dust or fibers into the air where they can be inhaled or ingested. Many of the fibers will become trapped in the mucous membranes of the nose and throat where they can then be removed, but some may pass deep into the lungs, or, if swallowed, into the digestive tract. Once they are trapped in the body, the fibers can cause health problems.

Asbestos is most hazardous when it is friable. The term "friable" means that the asbestos is easily crumbled by hand, releasing fibers into the air. Sprayed on asbestos insulation is highly friable. Asbestos floor tile is not.

Page 11: Annual Asbestos Awareness Review - …schools.olatheschools.com/buildings/osc/download/asbestos/annual...Olathe Public Schools | Annual Asbestos Awareness Review 1 ... Asbestos deposits

Olathe Public Schools | Annual Asbestos Awareness Review  11 

  

Asbestos-containing ceiling tiles, floor tiles, undamaged laboratory cabinet tops, shingles, fire doors, siding shingles, etc. will not release asbestos fibers unless they are disturbed or damaged in some way. If an asbestos ceiling tile is drilled or broken, for example, it may release fibers into the air. If it is left alone and not disturbed, it will not.

Asbestos pipe and boiler insulation does not present a hazard unless the protective canvas covering is cut or damaged in such a way that the asbestos underneath is actually exposed to the air.

Damage and deterioration will increase the friability of asbestos containing materials. Water damage, continual vibration, aging, and physical impact such as drilling, grinding, buffing, cutting, sawing, or striking can break the materials down making fiber release more likely.

Please remember Because it is so hard to destroy asbestos fibers, the body cannot break them down or remove them once they are lodged in lung or body tissues. They remain in place where they can cause disease.

Determining Factors Three things seem to determine your likelihood of developing one of these asbestos related diseases:

1. The amount and duration of exposure - the more you are exposed to asbestos and the more fibers that enter your body, the more likely you are to develop asbestos related problems. While there is no "safe level" of asbestos exposure, people who are exposed more frequently over a long period of time are more at risk.

2. Whether or not smoke - if you smoke and you have been exposed to asbestos, you are far more likely to develop lung cancer than someone who does not smoke and who has not been exposed to asbestos. If you work with asbestos or have been exposed to it, the first thing you should do to reduce your chances of developing cancer is to stop smoking. Organizations that may offer programs, support, or information to help people stop smoking are:

National Cancer Institute (1-800-4-CANCER) American Heart Association (1-800-242-8721) American Lung Association (in Kansas: 913-894-6767) American Lung Association (in Missouri: 816-842-5242) American Lung Association

3. Age - cases of mesothelioma have occurred in the children of asbestos workers whose only exposures were from the dust brought home on the clothing of family members who worked with asbestos. The younger that people are when they inhale asbestos, the more likely they are to develop mesothelioma. This is why enormous efforts are being made to prevent school children from being exposed. Because each exposure to asbestos increases the body burden of asbestos fibers, it is very important to reduce and minimize your exposure.

Additional Information about the risks of asbestos exposure put out by the EPA.

Page 12: Annual Asbestos Awareness Review - …schools.olatheschools.com/buildings/osc/download/asbestos/annual...Olathe Public Schools | Annual Asbestos Awareness Review 1 ... Asbestos deposits

Olathe Public Schools | Annual Asbestos Awareness Review  12 

  

EPA’s Five Facts Regarding Asbestos To put the potential hazard and risk of asbestos exposure in proper perspective, the EPA published the following five facts, which they hope will help calm the unwarranted fears that a number of people seem to have about the mere presence of asbestos in buildings.

One: Although asbestos is hazardous, the risk of asbestos-related disease depends upon exposure to airborne asbestos. Although asbestos is hazardous, the risk of asbestos-related disease depends upon exposure to airborne asbestos.

Two: Based on available data, the average airborne asbestos levels in buildings seem to be very low. Accordingly, the health risk to most building occupants also appears to be very low.

Three: Removal is often not a building owner's best course of action to reduce asbestos exposure. In fact, an improper removal can create a dangerous situation where none previously existed. Removal is often not a building owner's best course of action to reduce asbestos exposure. In fact, an improper removal can create a dangerous situation where none previously existed.

Four: EPA only requires asbestos removal in order to prevent significant public exposure to airborne asbestos fibers during building demolition or renovation projects.

Five: EPA and OSHA recommend a proactive, in-place management program whenever asbestos-containing material is discovered. Management of asbestos in-place means having a program to ensure that the day-to-day management of the building minimizes release of asbestos fibers into the air, and ensures that if asbestos fibers are released, either accidentally or intentionally, proper control and cleanup procedures are implemented.

Source: U.S. Environmental Protection Agency: Managing Asbestos in Place--A Building Owner's Guide to Operations and Maintenance Programs for Asbestos-Containing Materials, 20T-2003, July 1990.

Key Points Asbestos-related diseases are dose-response related (the greater the exposure to airborne fibers, the greater the risk of developing an illness) and have a latency period (typically 15 to 30 years). Exposure to asbestos may result in:

Asbestosis – a disease characterized by lung scarring, which reduces the lungs' ability to function

Lung cancer – a disease characterized by lung scarring, which reduces the lungs' ability to function

Mesothelioma an always fatal cancer arising in the chest or abdominal cavity Other illnesses – these include cancer of the esophagus, stomach, colon, and pancreas; pleural

(fibrous) plaques; pleural thickening; and pleural effusion. Risks associated with low-level, non-occupational exposure (e.g., a building occupant who is not actually disturbing the asbestos) are not well established. The National Institute for Occupational Safety and Health (NIOSH) has determined, however, that there is no established safe level of exposure. Asbestos that has been identified will pose little risk if it is well maintained under an operations and maintenance program. EPA only requires asbestos removal to prevent significant public exposure to airborne asbestos fibers during building demolition or renovation activities.

 

Page 13: Annual Asbestos Awareness Review - …schools.olatheschools.com/buildings/osc/download/asbestos/annual...Olathe Public Schools | Annual Asbestos Awareness Review 1 ... Asbestos deposits

Olathe Public Schools | Annual Asbestos Awareness Review  13 

  

Recognizing Asbestos Containing Building Materials (ACBM)

In this section you will learn: Information to help you recognize suspect ACM and ACBM How to recognize damaged ACBM What various ACBM look like

How can asbestos be identified? While it is often possible to "suspect" that a material or product contains asbestos by visual inspection, actual identification can only be made by microscopic analysis. You can, however, learn what types of material could contain asbestos and use this information to avoid disturbing or damaging "suspect" material. Also learn what is asbestos in your building by reviewing the Asbestos Management plan. The plan is located in the main office of your building. Below is a list of common commercial materials that can contain asbestos. Some of these materials may even be found in your own home. Look over the list to make yourself familiar with the various materials. Common ACBM and ACM commercial materials include:

Appliances: ▪ Hand held dryers ▪ Toasters, popcorn

poppers, slow cookers ▪ Electric blankets ▪ Clothes dryers ▪ Boilers 

Asbestos Cement Products: ▪ Asbestos cement pipe and

fittings ▪ Asbestos cement sheets ▪ Asbestos cement shingles 

Automotive: ▪ Body filler, radiator sealant ▪ Transmissions, mufflers  

Construction Products: ▪ Wallboard ▪ Hoods and vents ▪ Roofing and roof shingles, siding 

Electrical Products: ▪ Cable and electrical

wire insulation ▪ Switchboards ▪ Electronic motor

components 

Felts and papers: ▪ Roofing and felts ▪ Pipeline wrap 

Floor Coverings: ▪ Vinyl-asbestos floor tile  ▪ Asbestos-felt backed

vinyl sheet flooring 

Friction materials: ▪ Brake shoes and pads ▪ Clutch facings 

Gaskets: ▪ Sheet gaskets ▪ Automotive gaskets ▪ Coal and wood

burning stove door gaskets 

Paints, coatings, sealants: ▪ Asphaltic compounds ▪ Buffing and polishing

compounds ▪ Caulking and patching

compounds ▪ Drilling fluids ▪ Plaster and stucco ▪ Textured paints and tile

cement 

Textile and felt products: ▪ Cloth (aprons, gloves,

suits, blankets) ▪ Rope, wicks, and tape ▪ Fire hoses ▪ Ironing board pads ▪ Piano and organ felts ▪ Theater curtains  

Other products: ▪ Distress flares ▪ Reinforced plastic ▪ Blackboards  ▪ Lamp sockets, light

bulbs  ▪ Phonograph records ▪ Linings for vaults,

safes, filing cabinets 

   

Page 14: Annual Asbestos Awareness Review - …schools.olatheschools.com/buildings/osc/download/asbestos/annual...Olathe Public Schools | Annual Asbestos Awareness Review 1 ... Asbestos deposits

Olathe Public Schools | Annual Asbestos Awareness Review  14 

  

ACBM As was learned earlier, the EPA places Asbestos Containing Building Material in three categories:

Surfacing Materials -- Interior ACBM that has been sprayed on, troweled on, or otherwise applied to surfaces (structural members, walls, ceilings, etc.) for acoustical, decorative, fireproofing, or other purposes. This includes acoustical plaster, hard plasters (wall or ceiling), fireproofing insulation, spray-applied or blown-in thermal material, joint or patching compound (wall or ceiling), and textured paints or plasters.

Thermal System Insulation -- Insulation used to control heat transfer or prevent condensation on pipes and pipe fittings, boilers, breeching, tanks, ducts, and other parts of hot and cold water systems; heating, ventilation, and air conditioning (HVAC) systems; or other mechanical systems. These insulation materials include pipe lagging, pipe wrap, HVAC duct insulation, block insulation, cements and muds, and a variety of other products such as gaskets and ropes.

Miscellaneous Materials -- Other, mostly nonfriable products and materials found on structural components, structural members or fixtures, such as floor tile, ceiling tile, construction mastic for floor and ceiling materials, sheet flooring, fire doors, asbestos cement pipe and board, wallboard, acoustical wall tile, and vibration damping cloth. "Miscellaneous materials" do not include thermal system insulation or surfacing materials.

Below you will find images of ACBM from each of these three categories. Look at each image carefully so you can become familiar with the appearance of asbestos containing material. Examples of Surfacing Materials

   

Plaster: Pictured is plaster sample #80807K19; white finish coat over brown/base coat applied to wire lathe. This 1920s vintage plaster meets the definition of asbestos containing material (ACM), and becomes friable if it is disturbed. Note the visible fiber bundle at 7.5 mm. Many acoustical plasters are also ACM Picture is courtesy of University of Wisconsin-Milwaukee

Floor Underlayment Here is an example of industrial sand floor underlayment and nine-inch asbestos composite floor tile in the Kenilworth building. We believe the purpose of the underlayment was for vibration dampening and noise reduction in this former factory building, built 1914, by the Ford Motor Company. The underlayment is approximately 1" thick. This material contains approximately 10% chrysotile asbestos and is applied directly over concrete. Asbestos floor tile is applied over the underlayment. Picture is courtesy of University of Wisconsin-Milwaukee

Page 15: Annual Asbestos Awareness Review - …schools.olatheschools.com/buildings/osc/download/asbestos/annual...Olathe Public Schools | Annual Asbestos Awareness Review 1 ... Asbestos deposits

Olathe Public Schools | Annual Asbestos Awareness Review  15 

  

Examples of Thermal System Insulation (TSI)

This is an example of highly friable thermal system insulation (TSI). This particular type, often called "mag" insulation, was used to insulate pipes. We normally find mag on high-temperature utilities such as steam or condensate lines. This sample contains both chrysotile and amosite asbestos. This particular sample has long visible fibers, but some mag insulation doesn't. As seen in this photo, mag insulation is highly friable and can result in significant exposure if disturbed.

Picture is courtesy of University of Wisconsin-Milwaukee.

Here is an example of common asbestos thermal system insulation (TSI), similar in appearance to gray, wrapped paper or cardboard. Picture is courtesy of University of Wisconsin-Milwaukee.

Though similar in appearance to the TSI above, the insulation pictured below is non-ACM. It was obtained from another building. So, is there a way to tell the difference simply by appearance? No, you must have it analyzed. Picture is courtesy of University of Wisconsin-Milwaukee

The gray corrugated, cardboard-like material pictured below is AirCell (or Air-O-Cell) asbestos

insulation.

Picture is courtesy of University of Wisconsin-Milwaukee.

The picture below shows an Instance where new fiberglass insulation was applied directly over existing asbestos insulation. Use caution when working on any unlabeled material, particularly in areas where we have both ACM insulation side-by-side with new insulation. If in doubt, assume the material is ACM. Picture is courtesy of University of Wisconsin-Milwaukee.

Picture is courtesy of University of Wisconsin-Milwaukee.

Picture is courtesy of University of Wisconsin-Milwaukee..

An example of asbestos in a laboratory incubator (door gasket and body insulation).  

   

Page 16: Annual Asbestos Awareness Review - …schools.olatheschools.com/buildings/osc/download/asbestos/annual...Olathe Public Schools | Annual Asbestos Awareness Review 1 ... Asbestos deposits

Olathe Public Schools | Annual Asbestos Awareness Review  16 

  

Examples of Miscellaneous Materials

Laboratory Equipment: Laboratory ovens, like this muffle furnace, often have asbestos insulation. For example, this small oven has both non-friable transite board and friable ACM insulated electrical wiring (both materials are chrysotile asbestos). Picture is courtesy of University of Wisconsin-Milwaukee.

Celing Tile: Although rare in Olathe School District, ceiling tile may also contain asbestos. This tile has both chrysotile and amosite fibers.

Picture is courtesy of University of Wisconsin-Milwaukee.

Clothing: The top glove is an asbestos thermal mitten (70% chrysotile asbestos). Asbestos clothing of this type may result in unnecessary asbestos exposure through normal use and handling, therefore we do not recommend the use of asbestos protective clothing. The bottom glove is a modern, non-asbestos item. Non-asbestos thermal protective clothing is available from the usual laboratory equipment vendors.

Picture is courtesy of University of Wisconsin-Milwaukee.

Picture is courtesy of University of Wisconsin-Milwaukee. 

Transite and Transite-like Products: This is an example of transite board. This variety is similar in appearance to common pegboard, except transite is usually gray and very dense. The perforated variety is often used in acoustical applications such as in music rooms and auditoriums.

The laboratory bench on left picture (transite) has a black laminate surface. Note the visible fibers in the asbestos bench sample. The small sample is from a stone bench top. Transite is a Category II waste. Superficially, the transite and stone bench tops look identical due to the black laminate surface.

Picture is courtesy of University of Wisconsin-Milwaukee. 

Oakum: This is oakum pipe joint packing. Sample #90813K19 was negative, however other oakum varieties have tested positive for asbestos and were highly friable.

Picture is courtesy of University of Wisconsin-Milwaukee.

 

Page 17: Annual Asbestos Awareness Review - …schools.olatheschools.com/buildings/osc/download/asbestos/annual...Olathe Public Schools | Annual Asbestos Awareness Review 1 ... Asbestos deposits

Olathe Public Schools | Annual Asbestos Awareness Review  17 

  

Recognizing damaged asbestos containing material. There are three conditions that result in asbestos becoming airborne. They are fallout, impact and reentrainment. Fallout

Fallout is the result of aging and degradation of the bonding agents that hold the asbestos product together.

Fiber release from fallout is usually low level, continuous, and may increase as the structure ages.

Fallout can be a source of fibers, which accumulate on horizontal surfaces overtime. Impact Impact is the contact of asbestos materials through actions such as striking, cutting or penetration. These actions disturb the integrity of the material, resulting in fiber release. Highly friable forms of asbestos are especially susceptible to impact. Activities such as spraying with adhesives and paints can cause fiber release. Impact causes occasional, but high, concentrations of fiber release. Reentrainment Reentrainment results from the physical disturbance of settled fibers, causing them to become airborne again. Sweeping; dusting, and other normal building activities can result in reentrainment of fallen asbestos fibers. Reentrainment can result in fiber release that may vary from low to high airborne concentrations. If water damage, physical damage or delamination of the material is observed, then fiber release has occurred, is occurring or will likely occur in the future. Fibers that are released into an air stream, such as in an air plenum or near a forced air stream are likely to be transported to other parts of the building. Materials subjected to noise or vibration such as those located in gymnasiums, band rooms or in buildings near highways or airports may have a higher potential to release asbestos fibers.  

 

 

 

 

 

 

 

Page 18: Annual Asbestos Awareness Review - …schools.olatheschools.com/buildings/osc/download/asbestos/annual...Olathe Public Schools | Annual Asbestos Awareness Review 1 ... Asbestos deposits

Olathe Public Schools | Annual Asbestos Awareness Review  18 

  

Examples of Damaged ACBM: The following pictures show various types of ACBM with damage. Look closely at the images and note the areas with damage.  

Pipe Mud Packing: Asbestos was used in this instance and it has begun to crack and release fibers. Unless you have received the full 16-hour O&M course training you cannot clean up or repair material that contains asbestos. From the University of Kansas

 This picture shows a significantly damaged pipe joint on a steam pipe. The pipe is also insulated with asbestos air cell insulation that looks like corrugated cardboard on the edges. Asbestos insulation on heating pipes is often held in place by metal bands.    Copyright © 1997-2000 Heimer Engineering, P.C. All right Reserved. Used with Permission.

This picture also shows asbestos mud joints that are significantly damaged. This pipe is also insulated with asbestos air cell insulation. Most pipes wrapped in asbestos also have asbestos containing joints.

Paper Insulation: If you find material in this condition, and pieces of asbestos paper on the floor, immediately leave the area and report it to the Operation Service Center at 780-7011. Most of this pipe covering is in good condition, but there are some damaged areas. When these areas are repaired, the pipe is then considered to be in good condition, and there should not be any release of fibers. While the pipe is still damaged, only those personnel with the appropriate training will be allowed to repair or clean up around the pipe. AHERA Classification: Damaged Thermal Insulation.

From the University of Kansas

Sprayed-on Ceiling: Asbestos is often found on ceilings as a sprayed-on material. Generally, this material is friable. If it is encapsulated or has a hard coating, it does not represent a hazard unless disturbed. You may work around this type of material, however, do not hang displays or flower pots, etc. from it. AHERA Classification: Potential for Significant Damage (because of occupancy and use.)  

From the University of Kansas 

Page 19: Annual Asbestos Awareness Review - …schools.olatheschools.com/buildings/osc/download/asbestos/annual...Olathe Public Schools | Annual Asbestos Awareness Review 1 ... Asbestos deposits

Olathe Public Schools | Annual Asbestos Awareness Review  19 

  

Sprayed-on Insulation: The ACBM sprayed on the pipes and ceiling in this slide shows water damage and delamination. Again, only personnel who have received the 16 hour O&M training may clean-up the disturbed asbestos containing building material debris. Instead, the LEA contact person should be notified immediately. AHERA Classification: Significantly Damaged Surfacing Material. From the University of Kansas

Sprayed-on Insulation: Here is an example of friable asbestos sprayed-on ceiling beams as fireproofing. Notice where the asbestos is hanging loose; this is very friable. From the University of Kansas

Insulation on a Broiler: It has been estimated that one out of every four boilers installed before 1970 contains asbestos. Generally, if the boiler is coated with asbestos then so are the boiler pipes. Usually the insulation on boilers is two to six inches thick and contains chicken wire or some other for structural support. Repair of this material or the cleaning of ACM debris must be done by properly trained O&M personnel. AHERA C1assification: Damaged Thermal Insulation. From the University of Kansas

6 Month Periodic Inspections A visual inspection of asbestos is required every six months. Custodial and maintenance personnel with the proper asbestos awareness training are qualified to conduct visual inspections. Please note, visual inspection means that you look carefully at the ACBM for any possible damage or deterioration, but you are not to repair or touch any damaged material. Damage ACBM should be reported to the Operation Service Center at 780-7011.

During the inspection, look for materials that are deteriorating in condition. Evidence of debris on horizontal surfaces, hanging material, dislodged chunks, scrapings, indentations and cracking are indicators of poor material condition. Look for areas of accidental or deliberate physical damage where Asbestos Containing Building Materials (ACBM) have been disturbed such as:

finger marks in the material graffiti pieces of missing or dislodged material scrape marks from movable equipment or furniture an accumulation of friable materials on the floor, shelves or other horizontal surfaces.

Look for deterioration resulting in the accumulation of dust on the surface of the ACBM, delamination of the material, or an adhesive failure where it pulls away from the substrate. Inspect the materials for water damage, such as discoloration of or stains on the ACBM or the adjacent walls or floors. Look for buckling of the walls or floors and areas where pieces of ACBM may have separated into layers or may be failing down and exposing the substrate.

Page 20: Annual Asbestos Awareness Review - …schools.olatheschools.com/buildings/osc/download/asbestos/annual...Olathe Public Schools | Annual Asbestos Awareness Review 1 ... Asbestos deposits

Olathe Public Schools | Annual Asbestos Awareness Review  20 

  

Actions to Take By taking the right action you can reduce the risk of exposure to asbestos.

Know where the asbestos is in your building. If you find materials that could contain asbestos, recommend to your supervisor that they be tested.

Ask your supervisor for training in proper ways to work around asbestos materials. If you see materials that have been disturbed, report the damage to the Operation Service Center at 780-7011.

If the cleaning or maintenance in your building is not being done properly, see that it is corrected.

Maintenance personnel with the 16 hour training ought to keep on hand items that are useful for working on or around asbestos materials. These include:

disposal bags respirators tools for working on insulation disposable coveralls drop cloths water bottles for misting filters, etc. glove bags

Key Points You can "suspect" that material contains asbestos but only through microanalysis can asbestos be identified.

learn what material is most likely to contain asbestos read the Asbestos Management Plan to learn where actual ACBM is located in your

work place.

If you find damaged ACBM, do not attempt to repair or clean up the spill. Contact the Operation Service Center at 780-7011 and report the incident.

Only maintenance personnel who have had the 16 hour O&M training may clean up or repair damaged asbestos material.

There are three conditions that result in asbestos becoming airborne. They are: fallout impact reentrainment

 

   

Page 21: Annual Asbestos Awareness Review - …schools.olatheschools.com/buildings/osc/download/asbestos/annual...Olathe Public Schools | Annual Asbestos Awareness Review 1 ... Asbestos deposits

Olathe Public Schools | Annual Asbestos Awareness Review  21 

  

How to avoid Asbestos Exposure In this section you will learn:

How to protect yourself from exposure How to minimize your risk if exposed How to strip asbestos tile floors How to finish asbestos tile floors How to maintain asbestos tile floors What to do if you find damaged asbestos material

In order to avoid being exposed to asbestos, you must be aware of the locations it is likely to be found. If you do not know whether something is asbestos or not, assume that it is until it is verified otherwise. Remember that you cannot tell if floor or ceiling tiles contain asbestos just by looking at them. If you have reason to suspect that something is asbestos, either because it is labeled as such, or because it is something that is likely to contain asbestos (9" floor tile, for example) DO NOT DISTURB IT. Never:

drill hammer cut saw break damage move disturb poke, any asbestos-containing materials or suspected materials.

The Olathe School District has surveyed all district buildings for the presence of asbestos. If you need to do work that might involve asbestos (lifting ceiling tiles, repairing insulated pipelines, etc.), check with Operations Service Center to find out what can be done safely. For example, before moving any ceiling tiles to perform maintenance work, it will be necessary to ensure they do not contain asbestos. If they do contain asbestos, they will need to be removed by licensed asbestos abatement workers before the work may be performed.

Housekeeping Stripping of Vinyl Asbestos Floor Coverings

Training

Custodial and maintenance personnel who are responsible for the care and maintenance of asbestos containing floor coverings should be thoroughly trained to safely and properly operate the machines, pads and floor care chemicals used at the facility. Frequency of Stripping

Stripping of vinyl asbestos floor coverings should be done as infrequently as possible (e.g., once per year maximum and preferably when the building is unoccupied). Excessive stripping of floors using aggressive techniques will result in increased levels of asbestos fibers in the air

Page 22: Annual Asbestos Awareness Review - …schools.olatheschools.com/buildings/osc/download/asbestos/annual...Olathe Public Schools | Annual Asbestos Awareness Review 1 ... Asbestos deposits

Olathe Public Schools | Annual Asbestos Awareness Review  22 

  

Prior to Stripping

Prior to machine operation, apply an emulsion of chemical stripper in water to the floor. Use a mop to soften the wax or finish coat. Stripping Operations

When stripping floors becomes necessary, the machine used for stripping the finish should be equipped with the least abrasive pad as possible (black pads are usually the most abrasive and the white pads the least abrasive). Consult with your floor tile and floor finish product manufacturer for recommendations on which pad to use on a particular floor covering. Incorporate the manufacturer's recommendations into your floor maintenance work procedures. The machine used to remove the wax or finish coat should be run at a low rate of speed (i.e., ranging between 175-300 rpm) during the stripping operation. There is a direct correlation between machine speeds and the release of asbestos fibers from asbestos containing floor coverings. The higher the machine speed the greater the probability of asbestos fiber release. Never perform dry stripping. Always strip floors while wet. Do not operate a floor machine with an abrasive pad on un-waxed or unfinished floor containing-asbestos materials. Consult with floor tile and floor finish product manufacturers concerning specific or unique problem(s) on the maintenance of your floors. After Stripping

After stripping and before application of a high solids floor finish, the floor should be thoroughly cleaned, while wet, preferably with a Wet-Vac HEPA filtration vacuum system. Finishing of Vinyl Asbestos Floor Coverings

Use of Sealer and Solid Finish Prior to applying a finish coat to a vinyl asbestos floor covering, apply 2 to 3 coats of sealer. Continue to finish the floor with a high percentage solids finish. It is an industry recommendation to apply several thin coats of a high percentage solid finish to obtain a good sealing of the floor's surface, thereby minimizing the release of asbestos fibers during finishing work. Spray-Buffing Floors

When spray-buffing floors, always operate the floor machine at the lowest rates of speed possible and equip the floor machine with the least abrasive pad as possible. A recent EPA study indicated that spray-buffing with high-speed floor machines resulted in significantly higher airborne asbestos fiber concentrations than spray-buffing with low speed machines. Burnishing Floors

When dry-burnishing floors, always operate the floor machine at the lowest rate of speed possible to accomplish the task (i.e., 1200-1750 rpm), and equip the floor machine with the least abrasive pad as possible.

Page 23: Annual Asbestos Awareness Review - …schools.olatheschools.com/buildings/osc/download/asbestos/annual...Olathe Public Schools | Annual Asbestos Awareness Review 1 ... Asbestos deposits

Olathe Public Schools | Annual Asbestos Awareness Review  23 

  

Cleaning After Stripping and Sealing Floors After stripping a floor and applying a new coat of sealer and finish, use a wet mop for routine cleaning whenever possible. When dry mopping, a petroleum-based mop treatment is not recommended for use. Maintenance During Winter During the winter months when sanding and/or salting of icy parking lots becomes necessary, it is an industry recommendation that matting be used at the entrance way to the school building and inside the doorway where feasible. This would significantly eliminate the scuffing of floors by abrasive sanding materials brought into the building on the shoes of building occupants. More frequent wet mopping and dry mopping of floors should be performed during the winter months to minimize damage to the floors. The same recommendations holds true of schools located on coastal areas where building occupants could track sand into the schools.

Additional Precautions

Condition of Glides

Check to see if chair and desk glides are in good condition and replace where indicated. Worn glides can gouge the floor coverings and possibly cause asbestos fiber release. Parking Lot/Walkway Maintenance

During the winter months, have parking lots and walkways swept to avoid tracking salt and ice-melting compounds into the school by students. These materials can cause severe scuffing of floor coverings and lead to the release of asbestos fibers into the school building(s). Use of Mats Where feasible, use mats at entrance ways to cafeterias, gymnasiums, libraries, etc., to protect against possible scuffing of floor covering(s), etc. from salt and ice-melting compounds and from ocean sand. Broken and fallen ceiling tiles should be left in place until identified. Only after they have been identified as safe may they be removed. Asbestos tiles will be removed by asbestos abatement workers. Broken and damaged asbestos floor tiles must also be removed by asbestos abatement workers. Spills It is important to report any damaged asbestos-containing materials to Operations Service Center at 780-7011 immediately. If, for example, you discover some sprayed-on asbestos insulation has been knocked off a ceiling or wall, this would be considered a "spill." As such it would need to be cleaned up immediately by asbestos abatement workers. Do not attempt to clean up spills yourself! Disturb the material as little as possible. Also report any damaged pipe insulation, ceiling tile, 9" floor tile, fallen clumps of sprayed-on insulation, etc. Take measures to prevent others from disturbing the spill until the Asbestos Abatement crew arrives. By knowing where asbestos is likely to be located and then taking measures not to disturb it, you will protect yourself and others from exposure to this hazardous substance.

Page 24: Annual Asbestos Awareness Review - …schools.olatheschools.com/buildings/osc/download/asbestos/annual...Olathe Public Schools | Annual Asbestos Awareness Review 1 ... Asbestos deposits

Olathe Public Schools | Annual Asbestos Awareness Review  24 

  

Guide for Reducing Asbestos Exposure by the EPA

Your Building contains materials which contain asbestos and may release fibers into the air. Breathing asbestos fibers is dangerous. This fact sheet tells how to reduce exposure to asbestos fibers. Please read it carefully. Protecting Yourself from Asbestos Some of the friable building materials in your school contain asbestos. Friable asbestos-containing materials crumble easily and release fibers into the air. Breathing these fibers may cause cancer and other diseases. The more asbestos you breathe the greater your chances are of getting disease. You can take precautions that will reduce or eliminate the risk of being exposed to asbestos. Find out from your supervisor where these friable asbestos containing materials are in your building. Do not touch or disturb them unless you have to. If you must handle an asbestos-containing material, first lightly spray it with water. (EPA recommends using water which contains wetting agents, if they are available.) Wet asbestos-containing material will not release as many fibers. Even if friable asbestos-containing materials are not disturbed, they may release asbestos fibers, which will fall slowly to the floor. If you are cleaning in areas which contain these materials, do not use a broom: it will stir fibers into the air. Do not use a vacuum cleaner unless it is equipped with a High Efficiency Particulate Absolute (HEPA) filter. The fibers are so small they can pass through an ordinary vacuum cleaner and out into the room. When cleaning in areas which contain friable asbestos-containing material, use dampened mops and dustcloths. Dampened mops and dustcloths will hold the fibers much better than dry mops and dustcloths, and will reduce the number of fibers put back into the air. It is best to use mops with disposable heads and to throw away the mop head after use. Otherwise fibers will be released as the mop dries. Use either lightly dampened mops or cloths or a vacuum with a High Efficiency Particulate Absolute filter to clean areas where wet mopping cannot be used (such as carpeting or hardwood floors). Clean tables and chairs in the area with damp cloths. Do not dust them with brushes or with dry cloths, and do not vacuum them. After you use the mop heads and cloths, put them in a plastic bag while they are still wet. Dislodged materials should also be placed in plastic bags for disposal.

A List of Important Points to Remember • Do not handle or disturb friable asbestos-containing materials unless necessary. • If you must handle asbestos-containing materials, wet them first. • If you must disturb asbestos (for example, to repair a light), see your supervisor before

starting work, then:

▪ Place a plastic dropcloth below the work area. ▪ Spray asbestos-containing material with water before you disturb it. ▪ Make sure that only those persons who are necessary for the job are in the area. ▪ Put all the asbestos you remove into a heavy plastic bag. Seal the bag and discard it. ▪ After the job, clean all the ladders and tools you used with a wet cloth.

Page 25: Annual Asbestos Awareness Review - …schools.olatheschools.com/buildings/osc/download/asbestos/annual...Olathe Public Schools | Annual Asbestos Awareness Review 1 ... Asbestos deposits

Olathe Public Schools | Annual Asbestos Awareness Review  25 

  

▪ Roll up the drop cloth carefully and put it in a plastic bag. Discard the bag. ▪ Clean the floor below the work area with a wet mop. ▪ Put the mop head and the cloth used to clean the ladders in a plastic bag while they

are still wet, seal the bag, and discard it.

If you must disturb or remove large sections of asbestos-containing material, see your supervisor before you begin. The National Institute for Occupational Safety and Health recommends that a respirator approved for toxic dusts be worn during such work. You should make arrangements to turn off the school’s ventilation system if you are disturbing or removing large sections of asbestos-containing material. The ventilation system should remain off until the work is completed and the area has been cleaned. EPA Form 7730-2 (6-82) AHERA 19

Custodians with the two hour training are not qualified to work on or cleanup asbestos.

Key Points Know the location of asbestos in your building and never:

drill hammer cut

saw break damage

move disturb poke

Any asbestos-containing materials or suspected materials. Maintain asbestos tile floor by using the least aggressive pads. Report damaged asbestos to the Operation Service Center. Do not attempt to clean up spills yourself!

   

Page 26: Annual Asbestos Awareness Review - …schools.olatheschools.com/buildings/osc/download/asbestos/annual...Olathe Public Schools | Annual Asbestos Awareness Review 1 ... Asbestos deposits

Olathe Public Schools | Annual Asbestos Awareness Review  26 

  

Federal and State Regulations In this section you will learn:

What the AHERA regulation does What NESHAPs means About the EPA Worker Protection Rule Permissible exposure limits What the Kansas Department of Health and Environment regulates

Concerning asbestos, public and private schools in Kansas are regulated by the Environmental Protection Agency and the State of Kansas. On October 22, 1986, Congress promulgated the Asbestos Hazard Emergency Response Act (AHERA), Public Law 99-519. AHERA mandated that EPA develop regulations to respond to asbestos in schools. On October 30, 1987, EPA promulgated the Asbestos-Containing Materials in Schools Rule (hereinafter referred to as the AHERA Rule), 40 CFR Part 763, Subpart E. This rule requires that all of the nation's nonprofit elementary and secondary schools, both public and private, inspect their school buildings for asbestos-containing building materials (ACBM), develop a plan to manage the asbestos for each school building, notify parents and staff regarding management plan availability, provide asbestos awareness training to school maintenance and custodial workers, and other requirements. The governing authority responsible for AHERA compliance is the Local Education Agency (LEA). "Local Education Agency" means either any local educational agency as defined in Section 198 of the Elementary and Secondary Education Act of 1965 (often called school district), the owner of any private, non-profit elementary or secondary school building, or the governing authority of any school operated under the Defense Department's education system. We are regulated by AHERA, Workers Protection Rule, NESHAPS, and the Kansas Department of Health and Environment. Below is a synopsis of what the varying regulations require.

EPA Asbestos Hazard Emergency Response Act (AHERA) AHERA applies only to schools. This law requires schools to: 1. Inspect buildings for asbestos by October 12, 1988:

EPA-accredited inspector must identify all asbestos and determine its condition. EPA-accredited management planner must develop management plan with protective measures.

Repair or remove any asbestos that presents a health hazard, take steps to maintain any remaining asbestos in good condition.

Provide employee training. Inform employees and parents of steps the school is taking to protect people from the asbestos.

2. Re-inspections every 3 years since original management plan went into effect July 9, 1989):

Inspector must re-inspect all known and assumed asbestos and determine its condition. Management planner must recommend protective measures.

Page 27: Annual Asbestos Awareness Review - …schools.olatheschools.com/buildings/osc/download/asbestos/annual...Olathe Public Schools | Annual Asbestos Awareness Review 1 ... Asbestos deposits

Olathe Public Schools | Annual Asbestos Awareness Review  27 

  

3. Management Plan & Response Actions: Schools must make the management plan available for public inspection and implement protective measures in a timely manner. Protective measures include:

removal encapsulation enclosure repair operations & maintenance

4. Annual Notification: School must notify employees and parents annually that the management plan is available for inspection and whether any asbestos related activities are planned for the year. 5. Short-Term Worker Notification: School must notify short-term workers (utility repairmen, contractors, etc.) of the location of asbestos in buildings. 6. LEA Designated Person: School must designate an employee to be responsible for implementing the management plan. 7. Training: School must provide 2-hr asbestos training to custodial and maintenance employees who work in buildings that contain asbestos, and an additional 14-hr training to employees who will disturb asbestos. 8. Periodic Surveillance: Every 6 months, school must check condition of all known and assumed asbestos. 9. Record Keeping: School must maintain detailed records of asbestos-related activities. 10. Warning Labels: School must attach warning labels adjacent to asbestos in routine maintenance areas (such as boiler rooms).

EPA Worker Protection Rule 40 CFR 763.121 (App. B to Subpart E for small-scale, short duration) This law is based on OSHA regulations. This law specifies how much asbestos a worker can be exposed to; various workplace practices; medical monitoring; worker protection and training requirements.

The law only applies to school employees who repair, remove, or otherwise disturb friable asbestos as part of their work. It does not apply to custodial employees who only clean or work in the vicinity of asbestos.

1. Permissible Exposure Limits (PEL) Specifies how many asbestos fibers an employee can be exposed to, based on samples of air at the worksite. Current PEL is 0.2 fibers per cubic centimeter of air, based on measurements taken over an 8 hour time period.

Page 28: Annual Asbestos Awareness Review - …schools.olatheschools.com/buildings/osc/download/asbestos/annual...Olathe Public Schools | Annual Asbestos Awareness Review 1 ... Asbestos deposits

Olathe Public Schools | Annual Asbestos Awareness Review  28 

  

What does this mean? If you are working at a moderate pace and have healthy lungs, you are breathing about 25 liters of air per minute. If you are exposed to the PEL of 0.2 f/cc for 8 hours, you will inhale over 2 million asbestos fibers. SAME SIZE AS A DROP OF WATER.

2. Respiratory Protection, Medical Monitoring, Training, Know Your Rights EPA enforces strict procedures to protect employees when they disturb asbestos:

Employees must wear respirators and protective clothing when disturbing asbestos.

School must enclose and restrict access to areas where asbestos work is taking place.

Employees must follow special work practices and use various controls when performing asbestos work.

Employees must follow special decontamination procedures before leaving an asbestos work area.

The asbestos work area must be cleaned using special procedures after the work is finished.

School must provide special training to employees who disturb asbestos.. Employees must be provided with annual medical examinations. Schools must keep detailed records of asbestos repair and removal jobs.

There are certain exemptions to these rules depending on the amount of asbestos being disturbed (< 3 ft.).

National Emissions Standards for Hazardous Pollutants (NESHAPs) NESHAPs is designed to prevent "visible emissions" of asbestos when buildings are renovated or demolished. This law applies to state and local government, private businesses, etc. NESHAPs Requirements:

Before a building is renovated or demolished, it must be inspected for asbestos. EPA and state agencies must be notified before a building is demolished (whether or not asbestos is present) or renovated (if friable asbestos is present).

Asbestos must be removed according to special methods. For instance, asbestos is usually wetted to control the release of fibers during demolition and renovation.

Asbestos must be disposed in leak tight containers while wet. Containers must be marked with special EPA labels. Waste must be buried within 24 hours.

Kansas Department of Health and Environment (KDHE) Regulations

KDHE regulates asbestos removal, encapsulation, dismantling, and demolition projects. KDHE has requirements for:

licensing and certification worker training notification work practices waste disposal

   

Page 29: Annual Asbestos Awareness Review - …schools.olatheschools.com/buildings/osc/download/asbestos/annual...Olathe Public Schools | Annual Asbestos Awareness Review 1 ... Asbestos deposits

Olathe Public Schools | Annual Asbestos Awareness Review  29 

  

 

Key Points EPA Regulations Asbestos Hazard Emergency Response Act (AHERA) AHERA applies to public and private elementary and secondary schools. AHERA requires schools to:

inspect buildings for asbestos   repair or remove any asbestos that presents a health hazard  take steps to maintain any remaining asbestos in good condition  provide employee training  inform employees and parents of measures being taken to protect people from asbestos  

Workers Protection Rule The worker protection rule applies to state and local government employees who disturb friable asbestos (other than small-scale, short-duration projects). The rule specifies:

permissible exposure limits (PEL)  safe work practices and controls  medical monitoring  training requirements 

National Emissions Standards for Hazardous Air Pollutants (NESHAPs) NESHAPs require public agencies and private businesses to prevent "visible emissions" of asbestos when buildings are renovated or demolished. During renovation and demolition, NESHAPs requires:

inspections notification of EPA and state agencies removal of asbestos proper disposal of asbestos waste

State Regulations Kansas Department of Health and Environment (KDHE) Regulations KDHE regulates asbestos removal, encapsulation, dismantling, and demolition projects. KDHE specifies requirements for:

licensing and certification worker training notification work practices waste disposal

 

Page 30: Annual Asbestos Awareness Review - …schools.olatheschools.com/buildings/osc/download/asbestos/annual...Olathe Public Schools | Annual Asbestos Awareness Review 1 ... Asbestos deposits

Olathe Public Schools | Annual Asbestos Awareness Review  30 

  

““AAccrroonnyymmss”” WWhhaatt ddoo tthheeyy mmeeaann??

ACM

Asbestos Containing Materials

ACBM Asbestos Containing Building Materials

HVAC Heating Ventilation Air Conditioning

AHERA Asbestos Hazard Emergency Response Act

EPA Environmental Protection Agency

O&M Operations & Maintenance

OSHA Occupational Safety & Health Administration

NIOSH National Institute for Occupational Safety and Health

PEL Permissible Exposure Limits

NESHAPs National Emissions Standards for Hazardous Air Pollutants

KDHE Kansas Department of Health and Environment

TSI Thermal System Insulation

RPM Revolutions Per Minute

HEPA High Efficiency Particulate Air

CFR Code of Federal Regulations

LEA Local Education Agency