Anotec Pty Limited

Anotec® 0307

Odour Control Formulations General Information & Specification Sheet

Formulations Division

ANOTEC PTY LTD | 30 CHEGWYN ST | BOTANY NSW 2019 | TEL: 02 9700

Anotec® 0307by Anotec Pty Ltd.

techniques for odour

or drip-fed depending on the application required

Anotec 0307 is fully miscible in water with scientifically chosen and blended surfactants. This blend,

when applied via either a misting, fogging device or trigger sprayer bottle, alters the surface tension

of the liquid/vapor compound.

A key property of the

odour components. The primary action takes place at the chemical odour and

interface.

Briefly, Anotec 0307 properties include:

• Detergent

• Increased penetrating and wetting abilities that allows the encapsulation of insoluble

chemical odour components.

• Aeration to assist in the successful disassociation of the chemical

• The ability to breakdown hydrocarbons into smaller droplets for further natural degradation.

• Dissolves the chemical odour component so that it no longer forms part of the original

emission.

Anotec® Odour control formulations are

developed for use in areas where odour issues

exist that constitute an odour annoyance

though all toxic issues

by the client.

Most conventional odour solutions consist of

applying fragrances to mask the problem. Adding

fragrances simply covers or overpowers offending odours with something more acceptable. Anotec

has a scientific 'fingerprint' approach. Odour samples are subjected to 'mass spectrometer analysis',

breaking down odours into component parts, providing a unique

odour control approach is to analyse this 'fingerprint' and provide a customized antidote solution

designed to control offending odours.

Anotec 0307 initially bonds with the odorous molecules resulting in

malodour incapable of reconstituting

formulations have

Anotec® 0307 Odour Control Formulations

ANOTEC PTY LTD | 30 CHEGWYN ST | BOTANY NSW 2019 | TEL: 02 9700

www.anotec.com.au

0307 is a brand name for all odour control, formulations researched and developed

by Anotec Pty Ltd. Efficacies of the formulations are determined via qualitative

techniques for odour measurement. Anotec 0307 formulations can be fogged, hand spra

depending on the application required.

is fully miscible in water with scientifically chosen and blended surfactants. This blend,

when applied via either a misting, fogging device or trigger sprayer bottle, alters the surface tension

of the liquid/vapor compound.

A key property of the Anotec 0307 formulation is that

odour components. The primary action takes place at the chemical odour and

Briefly, Anotec 0307 properties include:

Detergent-like action of the Anotec product in the liquid/air interface.

Increased penetrating and wetting abilities that allows the encapsulation of insoluble

chemical odour components.

Aeration to assist in the successful disassociation of the chemical

The ability to breakdown hydrocarbons into smaller droplets for further natural degradation.

Dissolves the chemical odour component so that it no longer forms part of the original

emission.

Odour control formulations are

d for use in areas where odour issues

exist that constitute an odour annoyance even

all toxic issues are addressed and treated

Most conventional odour solutions consist of

applying fragrances to mask the problem. Adding

ply covers or overpowers offending odours with something more acceptable. Anotec

has a scientific 'fingerprint' approach. Odour samples are subjected to 'mass spectrometer analysis',

breaking down odours into component parts, providing a unique

odour control approach is to analyse this 'fingerprint' and provide a customized antidote solution

designed to control offending odours.

initially bonds with the odorous molecules resulting in

malodour incapable of reconstituting back into a volatile organic compound.

formulations have been proven scientifically by way of olfactometry and chemical fingerprinting.

Anotec® 0307 Odour Control Formulations

General Information & Specification Sheet

Formulations Division

ANOTEC PTY LTD | 30 CHEGWYN ST | BOTANY NSW 2019 | TEL: 02 9700 1222 | FAX: 02 9700 1771

www.anotec.com.au

all odour control, formulations researched and developed

Efficacies of the formulations are determined via qualitative

Anotec 0307 formulations can be fogged, hand spra

.

is fully miscible in water with scientifically chosen and blended surfactants. This blend,

when applied via either a misting, fogging device or trigger sprayer bottle, alters the surface tension

that it modifies the surface properties of chemical

odour components. The primary action takes place at the chemical odour and

like action of the Anotec product in the liquid/air interface.

Increased penetrating and wetting abilities that allows the encapsulation of insoluble

Aeration to assist in the successful disassociation of the chemical odour compound.

The ability to breakdown hydrocarbons into smaller droplets for further natural degradation.

Dissolves the chemical odour component so that it no longer forms part of the original

Odour control formulations are

d for use in areas where odour issues

even

Most conventional odour solutions consist of

applying fragrances to mask the problem. Adding

ply covers or overpowers offending odours with something more acceptable. Anotec

has a scientific 'fingerprint' approach. Odour samples are subjected to 'mass spectrometer analysis',

breaking down odours into component parts, providing a unique odour ‘fingerprint’.

odour control approach is to analyse this 'fingerprint' and provide a customized antidote solution

initially bonds with the odorous molecules resulting in dilution thus

into a volatile organic compound. Efficacy of

been proven scientifically by way of olfactometry and chemical fingerprinting.

Anotec® 0307 Odour Control Formulations

Specification Sheet

Formulations Division

1222 | FAX: 02 9700 1771

all odour control, formulations researched and developed

and quantitative

Anotec 0307 formulations can be fogged, hand sprayed, misted

is fully miscible in water with scientifically chosen and blended surfactants. This blend,

when applied via either a misting, fogging device or trigger sprayer bottle, alters the surface tension

the surface properties of chemical

odour components. The primary action takes place at the chemical odour and Anotec 0307

Increased penetrating and wetting abilities that allows the encapsulation of insoluble

odour compound.

The ability to breakdown hydrocarbons into smaller droplets for further natural degradation.

Dissolves the chemical odour component so that it no longer forms part of the original

ply covers or overpowers offending odours with something more acceptable. Anotec

has a scientific 'fingerprint' approach. Odour samples are subjected to 'mass spectrometer analysis',

erprint’. Anotec's

odour control approach is to analyse this 'fingerprint' and provide a customized antidote solution

dilution thus rendering the

Efficacy of Anotec 0307

been proven scientifically by way of olfactometry and chemical fingerprinting.

Anotec® 0307 Odour Control Formulations

General Information & Specification Sheet

Formulations Division

ANOTEC PTY LTD | 30 CHEGWYN ST | BOTANY NSW 2019 | TEL: 02 9700 1222 | FAX: 02 9700 1771

www.anotec.com.au

Item Code 7110 Description Anotec 0307 is a concentrated odour control formulation

manufactured specifically for controlling and/or eliminating

malodours generated from general industrial, processing and

manufacturing activities. The formulation comprises of nature

identical plant oils, emulsifiers and non-ionic surfactant blend.

This product is fully miscible in water and must be diluted prior to

use

Application All Anotec® odour control formulations can be atomized via most

fogging and misting devices. Suggested application equipment

include the Anotec Fogmaster range, high pressure hydraulic or air

assisted nozzle arrangements.

Availability Anotec 0307 is available in 5-L, 25-L, 200-L and 1000-L IBC or Schutz

tanks. Ask about our Hyperconcentrate formulations suitable for

volume users and exporters.

Product Specification

Colour Clear / Milky-White

Odour Characteristic pine/eucalyptus blend

Specific gravity (mmHg) 0.98 grams/L

Stability / Storage 2 years (unopened)

Boiling Point (0C) 100

Flammability Not Flammable

Solubility in Water Completely

Abrasives None

pH 7.0

Ionic Nature Non-ionic