anotec boost-it pump to suit ano-jet
TRANSCRIPT
-
8/14/2019 Anotec Boost-It Pump to suit Ano-Jet
1/3
Pump R Unit.Model 6300: To suit High-Jet system
-
8/14/2019 Anotec Boost-It Pump to suit Ano-Jet
2/3
The Fogmaster Model 6300 Low PressurePump is designed to provide the liftnecessary to allow venturi type foggersto operate over six feet above theliquid source.
The Model 6300 has an oscillating pistonpump and a circuit with the ability to
sense a lack of liquid and automaticallyshut off the pump to avoid burnout.Operational lights are provided toindicate status, (Green = pump ON ,Yellow = low liquid level/nopressure). Preferably mount the pumpat or below the liquid source. Thepump can be mounted up to 7 abovethe liquid.
Pump R UnitBooster pump for Ano-Jet system
Model 6300 Pump-R, Low Pressure Pump
230 Volt Type
Anotec Pty Ltd30-32 Chegwyn StBotany NSW 2049
PO Box 292Botany NSW 1455
Tel: +612 9700 1222Fax: +615 9700 1771
Website: anotec.com.auEmail: [email protected]
-
8/14/2019 Anotec Boost-It Pump to suit Ano-Jet
3/3
Anotec Pty Limited
- 3 -
.The operation is straight forward. Connect theinlet to the liquid source and the outlet to theinlet on the fogger power head. When using thewith the High-Jet, pull the tubing off the hosebarb fitting on top of the cover plate, closest tothe handle and the power head end also. This isthe liquid supply line. Connect the thin 4tubing supplied with the pump to the hose barb
on the cover plate and the other end to the inlethose barb on the pump (next to the green light)and connect the other end to the High-Jet powerhead coupling. (Use tubing clips to hold thepressurised line on the hose barbs and preventleaking).
Plugging the Pump-R into 230VAC energises theunit. Unless constant running of the fogger isnecessary, most users plug the Pump-R andFogger into the controlled outlet of a Repeat
Cycle Timer.
The Model 6300 case is corrosion resistant. Thedesign life of the pump is 1000 hours.Replacement parts or repair are available fromAnotec.
Flow rate is .32 GPM @ 0 PSI and pump bypasses@ 38 PSI. These values may vary +/- 15%.
Operation
Anotec Pty Ltd30-32 Chegwyn StBotany NSW 2049
PO Box 292Botany NSW 1455
Tel: +612 9700 1222Fax: +615 9700 1771
Website: anotec.com.auEmail: [email protected]