✓ Most comprehensive change in DECADES

✓ Class A designed for Common Workplace Injuries

✓ Class B designed for High Risk Work Zones

✓ Class A & Class B Promote Workplace Compliance

✓ Easy to Maintain, Easy to Refill

✓ If your workplace includes wearing PPE, the Class B is the ideal compliance kit

✓ OSHA 1910.151 States that Adequate First Aid Supplies shall be Readily Available

✓ OSHA refers employers to ANSI Z308.1 as guidance for the Minimum Requirements for First Aid

✓ OSHA 1910.1030 Establishes BloodBorne Pathogen Requirements

✓ CSM is NOT a Kit-Repacker, we are a True Manufacturer Made in America with Certified Pride

hpsupplysolutions.com Thank You for Your Business! 21

Facts

Figure 1A. ANSI/ISEA Z308.1-2015, Class A Kit Label

ANSI/ISEA Z308.1-2015, Class A, Type I, II, III or IV First Aid KitThis kit meets the ANSI/ISEA Z308.1-2015 standard as sold. It contains first aid products which meet

performance specifications detailed in the standard at the below required minimum fill. It will continue to be compliant only when maintained with products that meet the standard at specified quantities

Required Minimum Fill 16 Adhesive Bandage 1 x 3 in. 1 Eye/Skin Wash 1 fl oz total1 Adhesive Tape 2.5 yd (total) 1 First Aid Guide10 Antibiotic Application 0.14 fl oz 6 Hand Sanitizer 1/32 oz10 Antiseptic 0.14 fl oz 2 pr Medical Exam Gloves1 Breathing Barrier 1 Roller Bandage 2 in. x 4 yd1 Burn Dressing (gel soaked) 4 x 4 in. 1 Scissors10 Burn Treatment 1/32 oz 2 Sterile pad 3 x 3 in.1 Cold Pack 4 x 5 in. 2 Trauma pad 5 x 9 in.2 Eye Covering w/means of attachment 1 Triangular Bandage 40 x 40 x 56 in. 2.9 sq. in.

The described kit may be suitable for some businesses. However, the adequacy of the contents for hazards of eachwork environment should always be evaluated by competent personnel. Kits should be inspected frequently to ensurethe completeness and usability of all first aid supplies. Any supply beyond its marked expiration date should bediscarded and replaced. For a variety of operations, employers may find that additional first aid supplies and kits areneeded.

Figure 1B. ANSI/ISEA Z308.1-2015, Class B Kit Label

ANSI/ISEA Z308.1-2015, Class B, Type I, II, III or IV First Aid KitThis kit meets the ANSI/ISEA Z308.1-2015 standard as sold. It contains first aid products which meet

performance specifications detailed in the standard at the below required minimum fill. It will continue to be compliant only when maintained with products that meet the standard at specified quantities

Required Minimum Fill 1 First Aid Guide50 Adhesive Bandage 1 x 3 in. 10 Hand Sanitizer 1/32 oz2 Adhesive Tape 2.5 yd (total) 4 pr Medical Exam Gloves25 Antibiotic Application 0.14 fl oz 2 Roller Bandage 2 in. x 4 yd50 Antiseptic 0.14 fl oz 1 Roller Bandage 4 in. x 4 yd1 Breathing Barrier 1 Scissors2 Burn Dressing (gel soaked) 4 x 4 in. 1 Splint25 Burn Treatment 1/32 oz 4 Sterile pad 3 x 3 in.2 Cold Pack 4 x 5 in. 1 Tourniquet2 Eye Covering w/means of attachment 4 Trauma pad 5 x 9 in. 2.9 sq. in. 2 Triangular Bandage 40 x 40 x 56 in.1 Eye/Skin Wash 4 fl. oz. total

The described kit may be suitable for some businesses. However, the adequacy of the contents for hazards of eachwork environment should always be evaluated by competent personnel. Kits should be inspected frequently to ensurethe completeness and usability of all first aid supplies. Any supply beyond its marked expiration date should bediscarded and replaced. For a variety of operations, employers may find that additional first aid supplies and kits areneeded.

QTY. CSM# UNIT# DESCRIPTION SIZE PIECES 4 R210-006 607 Certi-Strips - Plastic 1”x 3” 16/unit 2 R211-033 636 Triangular Bandage - w/Pins 40”x 40”x 56” 3/unit 1 R211-011 637 Certi-Gauze Pads 3”x 3” 4/unit 5 R213-038 675 Antiseptic BZK Towelettes 5”x 7” 10/unit 1 R213-033 735 Hand Sanitizer 1g 10/unit 1 R216-003 652 Certi-Tape 1/2”x 2-1/2 yd. 2/unit 1 R214-008 676 Eye Pads - 4 Certi-Tape - 4 Oval/Strips 8/unit 1 R216-013 782 Tourniquet - Latex Free-Forceps-Scissors Assort 3/unit 2 R216-082 816 Gloves - Nitrile Large 2/pair 1 R233-358 Certi-Sporyn - Antibiotic Cream 1g 25/box 1 R233-375 Certi-Burn Cream 1g 25/box 1 R270-026 CPRotector® - Plastic Bag 5.5”sq. 1 2 R216-035 Cold Pack - Certi-Cool Junior 5”x 7” 1 2 R505-204 Water Jel Burn Dressing 4”x 4” 1 1 R508-016 Eye Wash 4 oz. 1 2 C211-024 Certi-Gauze Roll 2”x 6 yd. 1 1 C211-027 Certi-Gauze Roll 4”x 6 yd. 1 4 R231-419 Trauma Pad - Compress 5”x 9” 1 1 R506-269 Sam® Splint 36” 1 1 R234-010 First Aid Facts Guide Book 1

36 MetalCSM# K615-019

ANSI Class A ANSI Class B

hpsupplysolutions.com Thank You for Your Business!

QTY. CSM# UNIT# DESCRIPTION SIZE PIECES 1 R210-006 607 Certi-Strips - Plastic - ANSI 1” x 3” 16/unit 1 R211-011 637 Certi-Gauze Pads - ANSI 3” x 3” 4/unit 1 R213-011 663 Certi-Sporyn - Antibiotic Cream - ANSI 1g 10/unit 1 R213-038 675 Antiseptic BZK Towelettes - ANSI 5” x 7” 10/unit 1 R213-033 735 Hand Sanitizer 1g 10/unit 1 R214-008 676 Eye Pads - 4 Certi-Tape - 4 Oval/Strips 8/unit 1 R515-081 645 Certi-Burn Cream - ANSI 1g 10/unit 1 R216-082 816 Gloves - Nitrile - ANSI Large 2/pair 1 R270-026 CPRotector® - Plastic Bag 5.5” sq. 1 1 R505-204 Water Jel Burn Dressing 4” x 4” 1 1 R216-035 Cold Pack - Certi-Cool Junior 5” x 7” 1 1 R511-017 Eye Wash 1 oz 1 1 R240-030 Certi-Tape - ANSI 1/2” x 2 1/2 yd. 1 1 C211-024 Certi-Gauze Roll 2” x 6 yd. 1 1 R237-010 Scissors - Bandage - Red Handle 4” 1 2 R231-419 Trauma Pad - Compress 5” x 9” 1 1 R211-033 636 Triangular Bandage - W/Pins 40” x 40” x 56” 3/unit 1 R234-009 First Aid Facts Guide Card 1

16 Poly WhiteCSM# K615-011

43

5

✓ Brand New items added to meet ANSI requirements

✓ “Mouth-to-Mouth Barrier” must be 510K device

✓ Eye Wash is a Snap-Off Top to Prevent Cross-Contamination

✓ Hand Sanitizer is now Mandatory

✓ Cold Compress Instantly Activates and Lasts for 20 Minutes

✓ All of these items must be added to your current first aid kit in order to meet the new ANSI requirement - Reference Page 3

hpsupplysolutions.com Thank You for Your Business! 6

Facts

7

✓ First Aid Kits no longer designated by “Number of Persons” that it will serve. Class A for Common Work Injuries and Class B for High Risk Injuries

✓ Class A and Class B Kits are Gasketed and Weather Resistant

✓ Save-A-Tooth® is the only tooth saving system scientifically proven to work, and has been FDA approved and received the ADA (American Dental Association) seal of acceptance. Teeth begin to die within 15 minutes of being knocked out of the mouth, but a Save-A-Tooth® will keep that tooth alive and undamaged for up to 24 hours

✓ Heat Stress Kits are important to any work area. Designed to bring down body temperature and to avoid heat stroke

✓ iXL Elite Hydration (Supplemental) Contains Zero Sodium, 400mg Potassium for electrolyte replenishment

✓ Elovate Glucose SlimPak (Supplemental) Protects the 1-in-12 people that are diabetics - Lows can be Fatal

✓ Hemostatic Agent (Supplemental) Coagulates the blood in seconds

✓ Providing Burn treatment when seconds count will go a long way in easing the injury and pain of the victim

hpsupplysolutions.com Thank You for Your Business! 8

Facts

9 hpsupplysolutions.com Thank You for Your Business!

ANSI/ISEA Z308.1-2015

Appendix B (informative)Guidance on Ongoing Maintenance, Other First Aid Supplies and Unitized Kits

B.1 Ongoing Maintenance of First Aid Kits

First aid kits should be frequently inspected to ensure the completeness and usable condition of supplies in order to maintain compliance with this standard. Any supply beyond its marked expiration date should be replaced.

B.2 Supplemental First Aid Supplies for Consideration - Applicable Environments

It is recognized that each work environment is unique and it is expected that a first aid kit containing the minimum required first aid supplies will be augmented with additional items or additional qualities of required supplies based upon the specified hazards existing in a workplace environment. The selection of such items should be based on the recommendation and consultation of a person competent in first aid and cognizant of the hazards and on the number of people found in the workplace. Federal, state and local requirements should be consulted, where appropriate. Augment kits with the following first aid supplies, as applicable:

FIRST AID SUPPLY PURPOSELow dose aspirin Used to treat suspected heart attackHemostatic agent For individuals with compromised clotting or uncontrollable bleedingElectrolyte replacement Heat-stress related injuriesGlucose replacement Diabetic or hypoglycemic episodesAnalgesics (oral and/or topical)/anti-inflammatory Pain management; swelling controlHydrocortisone Itchiness and skin-related reactions including rashesAntihistamine Allergic reactionsFoil blanket Treat shock and/or cold stress related injuries

B.3 Unitized Kits

Unitized first aid kits contain first aid supplies arranged in uniform-sized, color coded boxes, in an effort to simplify the organization and restocking of the kit. Color coding of such items is noted below:

● Blue - Antiseptics● Yellow - Bandages● Red - Burn Treatments● Orange - Personal Protective Equipment (PPE)● Green - Miscellaneous

Appendix B Guidelines

CSM# PURPOSE DESCRIPTION SIZE PIECES K615-007 ZLB - Supplemental First Aid Supplies

C232-001 Heart Attacks Aspirin Tablets 2/pkg. 2 C507-011 Clotting Blood WoundSeal Drop/Pour 3 R515-000 Hydration IXL STICK - Ras/Lem - 0 Sodium Powder 16.9 fl. oz R515-050 Diabetic Elovate Slimpak - Cherry 15g 1 C232-110 Inflammation Certi-Profen Tablets - Ibuprofen 2/pkg. 2 C216-028 Topical Anti-Itch Hydrocortisone Cream - 1% 1g 2 R514-027 Antihistamine Diphen Tablet 1/pkg R286-038 Shock Rescue Blanket - Silver in Plastic Bag 52” x 84” 1

Supplemental KitCSM# K615-007

10

Supplemental Products

11 hpsupplysolutions.com Thank You for Your Business!

10PW - Bloodborne PathogenCSM# FK200-970

10PW - Body Fluid Clean UpCSM# FK200-902

18PN - Burn ReliefCSM# K612-161

12

18PR - Complete First AidCSM# K612-072

Don’t Forget

13 hpsupplysolutions.com Thank You for Your Business! 14

18PR - Heat Stress ResponderCSM# K613-040

Lens Cleaning Towelettes CSM# R508-001

18PA - CamoCSM# K612-151

02/22/16 - Rev.03

U.S.A. Manufacturer of High Quality

FIRST AID Products

1400 Chestnut Ave.Kansas City, MO 64127Phone: 800-854-7474

email: info@certifiedsafety.comweb: certifiedsafetymfg.com

For more than 55 years, Certified Safety Mfg. has been bringing First Aid and Safety Products to the workplace. Our commitment is to provide quality products and prompt service as well as friendly and knowledgeable customer service. We will continue to be innovative with new products and listen to your ideas.

Certified Safety is world wide with distributors in many countries as well as in every major city in America.

The variety of quality items we produce has made us the #1 growing manufacturer in our industry. All of our products, where applicable, meet and/or exceed the guidelines set forth by OSHA and ANSI/ISEA standards as outlined in Section

Z308.1.2015 and Federal Specif icat ion GG-K391(a). Since Certified Safety is a manufacturer and not a “kit re-packager,” we are regulated by the FDA to meet and follow the rules set forth by cGMP (current Good Manufacturing Practices).

Beyond meeting and exceeding standards, we continually research new ways to innovate and manufacture better quality products. Our patented CPRotector (US Patent #5562093), the “Mouth-to-Mouth Barrier,” is second to none. We can customize for you and/or your customers and provide every variety of First Aid kit you can imagine.

We take pride in providing American made products and being a “one-stop shop.”

hpsupplysolutions.com Thank You for Your Business!