antipiracy
TRANSCRIPT
-
8/9/2019 Antipiracy
1/2
1
SALAMA FIKIRA INTERNATIONAL LIMITED
Anti Piracy Defences Stores for Vessel 200m x 35m
The quantities estimated to build defensives barrier on Bulk carriers and Container Ships vary due tothe different layouts / plans of the vessels. Bridges are taller on container ships and generally the beam/ breath is as well and there are other differences.
Ship Chandler / Agent should order the following;
STEEL:
⇒ 12 x 6mt lengths of “Square Tube 30mm” (2mm gauge) – see picture
⇒ 4 x 6mt lengths of Angle iron 40mm”. To be used to a post strainers.
⇒ 4 lengths (of 6m) of 2”Inch or 50mm” piping if the ship is a bulk carrier.
SQUARE TUBE ANGLE IRON
WIRE:
⇒ 1000m of Galvanised High Tensile fencing wire (must be 1.6mm or no bigger than 2.4mm )
⇒ 25 m of soft binding wire 2mm thickness
⇒ 1000m Coiled razor wire coiled in half-metre diameter – enough to lay 180metres of double
coils either side of the vessel. Surplus to block the access routes to B deck and the bridge⇒ Barbed wire is too time consuming and does not offer the same visual deterrent as razor wire.
COILED RAZOR WIRE
MISC:
⇒ 500 Cable ties – must be heavy duty, 25cm long
⇒ 4 x 50m of Under gate double insulated (or well insulated) single core cable.
⇒ It must have extremely good insulation and be extremely good quality. 1.6mm diameter.
⇒ Generally comes in rolls of 50 mts.– see picture.
-
8/9/2019 Antipiracy
2/2
2
SALAMA FIKIRA INTERNATIONAL LIMITED
CABLE TIES SINGLE CORE CABLE
⇒ 200 “W” light duty Insulators or similar. Because we cannot purchase pop, rivets that are longenough to service the Heavy-duty insulators. If they are available, go for the heavy duty.
⇒ 30 Straining Insulators.
⇒ If strainers are not available, they can be made on ship using the Teflon Plastic carried onships to make Washers and bushes.
STRAINING INSULATORS “W” INSULATORS
⇒
2 Pairs Coveralls – sizes X large this is depending on the number of team members deployingto ship.
⇒
4 Pairs Leather Gloves Heavy duty for working with Razor wire .
⇒ 2 x pop rivet guns
⇒
1000 of 5mm x 12.5mm pop rivets for light duty insulators. If heavy-duty insulators areprovide then the right size rivets need to be sourced. 4mm x20 mm length.
⇒ 3 Pliers
⇒ 3 rolls insulation tape
⇒ Connectors to connect the energiser to the fence wire.
⇒ 10 “WARNING – ELECTRIC” (“KHATAR”) signs Preferably in Somali
⇒
If the vessel does not have 220 volt power as standard then a step up transformer from 110vto 220v is needed. Power requirement for the fence unit is no more than 500 watts
ENERGIZERS
Energizer + Battery x 1 pcs - Transformer from Battery to 7000 Volt charge
NOTE:
The vessel must be equipped with welding machine, angle grinder, hacksaws Drill bits and 24hrelectricity supply.
Operations Salama Fikira Group
December 04 th , 2009.