EFFECTIVE JANUARY 1, 2017

A N T O I N E P R O U L X

The standard wood options offered by Antoine Proulx are:NeoLacquers: Ivory, Buttercream, Aged BronzeLimed Limba (Flat-cut) Ebonized Ash (Flat-cut)Weathered Limba (Flat-cut) ZebrawoodDriftwood Limba (Flat-cut) Natural Limba (Flat-cut)Smoke Gray Oak (Rift-sawn) Natural Wenge (Rift-sawn)Stormy Walnut (Flat-cut) Ebony (reconstituted)Bootblack Oak (Rift-sawn) Walnut Sand (Flat-cut)Statuary Walnut (Flat-cut) American Blk Walnut (Flat-cut)Midas Oak (Quartered) Natural Walnut (Flat-cut)Natural Figured Mahogany Riverbed Oak (Rift-sawn)Dark Figured Mahogany Desert Cerused Oak (Rift-sawn)Ebonized Walnut (Flat-cut) Mountain Cerused Oak (Rift)Stain to match +25%* (+ $250)* A sample for approval for astain-to-match is an additional $250.00 Net.

Pumiced Aluminum may be specified as a table-top material onall style numbers ending in “33” and “74.” For example, both theDT-33 Dining Table and the DK-74 Desk are available withPumiced Aluminum tops.

Other wood veneers may be specified by quote. Please call forquote and lead time (800-457-0756).

The standard metal finishes (for legs, supports, & pulls) offeredby Antoine Proulx are:

Black (with baked on epoxy finish)Bronze (with baked on epoxy finish)Burnished Brass (with baked on epoxy finish)Graphite (with baked on epoxy finish)Nickel (with baked on epoxy finish)Pewter (with baked on epoxy finish)Silvered Steel (with baked on epoxy finish)

All metal used for legs and supports is cold-rolled steel and/or alu-minum finished with a baked-on epoxy-coated finish in the colorsindicated above. Cold-rolled steel is an imperfect material whichexhibits natural pits and changes in density. This is an extrudedproduct, not a cast element. The innate properties of the cold-rolled steel are not defects, simply natural characteristics.

Both solid hardwoods and veneers (see Green Statement on page96) are used in the construction of all our handcrafted furniture.Solid woods are used in framing to ensure sturdy construction anddurability and veneers enable us to provide for a more uniformand continuous matching of wood grains and colorations.

All selections of veneers and metal finishes should be carefullymade due to the fact that all veneers and finishes are specifically selected by Antoine Proulx for each piece of furniture. Because notwo trees are alike, veneers used to process orders may differ fromsample veneers and floor samples. Also, keep in mind that mostwoods darken naturally with age. Therefore, new products can besignificantly lighter than older floor samples or veneer samples. Accordingly, Antoine Proulx does not guarantee an exact match tosamples, nor can we control the size, location, or coloration ofveneer markings.

Dove-tailed drawer bodies (see Green Statement on page 96) aremade of solid maple or ash (depending upon what is readily avail-able in the market). Drawer fronts utilize the same veneer as spec-ified for the entire piece. Imported drawer slides, which are bothinvisible (under-mounted) and silent when in motion, are usedwherever drawers are specified (except where full-extension drawerslides are indicated).

Our beds are made to fit the following standard American-sizedmattresses unless otherwise indicated on your purchase order:

Eastern King Mattress: 76”w x 80”l (7” - 8”h)California King Mattress: 72”w x 84”l (7” - 8”h)Queen Mattress: 60”w x 80”l (7” - 8”h)Full Mattress: 54”w x 75”l (7” - 8”h)Twin Mattress: 39”w x 75”l (7” - 8”h)

It is best if you select your mattress and/or box spring prior to ordering your bed frame from Antoine Proulx. If we do notreceive exact measurements from you (using the forms we pro-vide), we will use standard sizes above.

Antoine Proulx representatives should send orders and directinquiries to our Phoenix office:

Antoine Proulx, LLCAttn: Marc Desplaines207 West Clarendon Avenue, #8FPhoenix, AZ 85013

Tel: 602-952-1580email: marc@antoineproulx.comwebsite: www.antoineproulx.com

Design professionals operating in market areas of our representa-tives should send orders directly to them (see inside cover of cata-logue). Design professionals operating outside the market areas ofAntoine Proulx’s representatives should send orders to our Phoenixheadquarters above.

All tables and case goods by Antoine Proulx are F. O. B. North Oxford, Massachusetts:

R & P Woodworking, Inc.Attn: Richard Desplaines4 Pioneer DriveNorth Oxford, MA 01537

Tel: 508-987-3722Fax: 508-987-3922

photos: ted dillard/painting: scooter nyc studio/design: zuzugraphicsWhile reasonable efforts were made to ensure that the information in this price list was completeand accurate at the time of printing, Antoine Proulx assumes no responsibility for indirect, inciden-tal, or consequential damages arising from any errors herein. Changes or corrections to the informa-tion contained in our price list may be incorporated into future price lists.

EFFECTIVE JANUARY 1, 2017

TERMS AND CONDITIONS

A N T O I N E P R O U L X

1. PRICES: All prices are wholesale (net of discounts) to-the-trade,freighton board (F. O. B.) North Oxford, Massachusetts and do not include tax, crating, handling, insurance, storage, shipping, assembly, or installation.Prices are in U. S. Dollars.

2. TERMS: Please note that all Antoine Proulx furniture is made-to-order. A deposit of at least 50% of the purchase price is required withthe order before any work is commenced. Lead time for production onlyis 14 weeks from Antoine Proulx’s receipt of deposit (unless otherwiseindicated on Confirmation of Order and Agreement). Shipping time isadditional. When a stain-to-match is specified, lead time for productionbegins from Customer’s approval of Company’s match sample. Saiddeposits are not refundable except as pursuant to paragraph number 3.Full payment, including state or local excise taxes, if applicable, crating,handling, storage , if applicable, and insurance shall be made byCustomer and received by Antoine Proulx (Company) before delivery orshipment to Customer. For $75.00 Company shall assist Customer withsecuring shipment services for the furniture, if requested. Delivery datesare approximate and Company shall not be responsible for any delay orfailure in performance due to causes beyond its control. We recommendshipping merchandise double blanket-wrapped by moving van but willquote deliveries by common carriers. Company will provide shippingquotes with the following firms only: Ambassador for New England, NewYork Tri-State, and Florida deliveries; YRC for deliveries nationwide.Company will provide only one quote from either of the firms above. IfCustomer is not pleased with the quote we provide, it is Customer’sresponsibility to obtain its own quote and to notify Antoine Proulx of itschoice and final arrangements before Company will release the merchan-dise.

3. CHANGE ORDERS & CANCELLATIONS: Due to the fact that allveneers and finishes are specifically selected by the Company for eachpiece of furniture, changes will be accepted in writing ONLY up to seven(7) days after order confirmation date and ONLY if confirmed by theCompany in writing. Cancellations are not allowed.

4. STORAGE: The Company is not equipped to store any furniture forlong periods of time. If Customer is unable to secure delivery withinthirty (30) days of notification by the Company of completion of furni-ture, the Company reserves the right to transfer the furniture to a storagefacility at the Customer’s sole expense. Stored goods will result in storagecharges of $100 per month per item which shall be added to the paymentdue prior to delivery.

5. CLAIMS: The Company is not responsible for damage or loss incurredin transit or in storage. All furniture has been carefully inspected andwrapped with foam paper and bubble-wrap (or crated, if requested) priorto release to storage or delivery company. Any claims against theCompany shall be submitted by the Customer in writing within seven(7) days of receipt of delivery. Failure to make such claim shall consti-tute full and unqualified acceptance of the goods and a waiver of defectsor other claims. Company’s liability shall not exceed the contract priceand the Company shall not be responsible for indirect, incidental, or con-sequential damages arising from this agreement. Any loss or damage tothe furniture is the responsibility of the delivery company once the furni-ture leaves our workshop.

Antoine Proulx is not responsible for repairs to damages caused duringdelivery or storage nor is it responsible for filing insurance claims with thedelivery company. All freight claims are the responsibility of theCustomer. Antoine Proulx will provide a “Notification of DeliveryRelease” once the delivery company has picked-up the furniture from ourworkshop. Upon receipt of this notification, Customer should direct alldelivery inquiries to the delivery company. Bear in mind that the deliverycompany is notified to pick-up the furniture only after the Companyreceives final balance payment from Customer. Customer must allow upto two (2) weeks for delivery company to pick-up furniture at ourworkshop (due to its rural Massachusetts location) in addition to thetime necessary for delivery to final destination (2 - 4 more weeks).

6. GUIDELINES TO FOLLOW FOR FREIGHT DAMAGE: Any visibledamage should be noted by the delivery person on the freight bill. If fur-niture was crated, check for any indication of rough handling. Notify thedelivery company’s office immediately to inspect the merchandise if dam-age is noticed. If damage is noticed only when unpacking, notify thedelivery company immediately for inspection. Do not destroy packingmaterials until it is inspected. Any claims for loss or damage should befiled immediately with the delivery company making delivery to yourdoor. DO NOT REFUSE TO ACCEPT DELIVERY as this will causeunnecessary shipping expense for returns. If merchandise is returnedwithout you first having contacted the shipping company for inspection,no claim can be filed. Shipments returned to Antoine Proulx’s workshopwithout Company’s consent in writing will be refused and either re-deliv-ered or stored at Customer’s expense.

7. WARRANTY: The Company disclaims all warranties, express orimplied, including but not limited to any implied warranties of mer-chantability or fitness for a particular purpose. Customer shall keep inmind the fact that no two trees are alike; therefore, veneers may differfrom samples available. Similarly, since metal densities vary, the metalfinishes produced may deviate from samples shown. The Company doesnot guarantee, warrant or represent an exact match to samples, nor canCompany control size, location, or coloration of veneer markings + grain.

8. DESIGNS: Company reserves the exclusive right to manufacture thecopyrighted designs shown. All dimensions are considered approximate.The Company also reserves the right to make changes in dimensions,design, and construction without prior notice. Drawings for approvalare $300.00 and strike-off ’s for approval are $250.00 Net in advance.

10. DISPUTES: All disputes which involve this agreement shall be gov-erned by the laws of the State of Arizona. This agreement contains all theterms and conditions agreed upon by Customer and Company and super-sedes Customer's purchase order, if any. No modification to this agree-ment shall be valid unless in writing signed by both parties. Any contro-versy arising from this agreement shall be settled by arbitration whichshall be conducted in the City of Phoenix.

9. CUSTOMIZATION: Antoine Proulx will customize most of its designsas indicated in the price book. Minor changes such as the dimensions ofa table top will require at least a 10% additional charge over the net price.More complex changes to case goods or to design, configuration, andoverall scale in general will require at least a 15% additional charge overthe net price. Please always call for an exact quotation.

A N T O I N E P R O U L X

ARMOIRESAR-16 Armoire/Media Cabinet

AR-81A Armoire/Media Cabinet

BEDSBD-04 Bed

BD-45B BedBD-75 Platform Bed

BD-75B (box spring & mattress) BedBD-75C Platform BedBD-119S HIGH BedBD-119S LOW Bed

BD-119NW HIGH or LOW BedBD-138A BedBD-138B Bed

BD-160 BedDB-03 Day Bed

DB-116 Day BedDB-03C Day Bed

BENCHESBN-03 BenchBN-33 BenchBN-60 BenchBN-66 Bench

BOOKCASESBC-51 Bookcase

BC-52 Bookcase with Lateral File BaseBC-82A Bookcase with Lateral File BaseBC-82B Bookcase with Lateral File BaseBC-83A Bookcase with Cupboard BaseBC-83B Bookcase with Cupboard Base

INFO/FC-127 (A&C)MT-97A EtagereMT-97B Etagere

BC-130A Bookcase with Lateral File BaseBC-130B Bookcase

INFO/SH-134 Wall Mounted Shelves

CHAIRS (DINING/SIDE)CH-140 Dining/Side ChairCH-144 Dining/Arm ChairCH-168 Dining/Arm ChairCH-168 Dining/Side Chair

COFFEE TABLESCT-14 Coffee TableCT-21 Coffee Table

CT-21S Coffee Table with ShelfCT-22 Coffee Table/TV Stand

CT-26 Coffee TableCT-26S Coffee Table with Shelf

CT-33 Coffee TableCT-33S Coffee Table with Shelf

CT-43 Coffee TableCT-80 Coffee TableCT-85 Coffee TableCT-91 Coffee Table

CT-91S Coffee Table with ShelfCT-139 Coffee Table

CT-147S Coffee Table with ShelfCT-162 Coffee Table

CT-193 Racetrack Coffee TableCT-195 Coffee Table

CONSOLE TABLESST-03 Console TableST-12 Console Table

ST-21S Console Table with Shelf

ST-26 Console TableST-26S Console Table with Shelf

ST-33 Console TableST-33S Console Table with Shelf

ST-91 Demilune Console TableST-91S Demilune with ShelfST-147S Console with Shelf

DESKSDK-06 Desk (A&B)

DK-21 DeskDK-26 DeskDK-28 Desk

DK-28P Partner’s DeskDK-33 Desk

SE-33 Computer Side ExtensionDK-36 DeskDK-74 Desk

DK-95 Arc-shaped Desk

DK-158 Desk with Bookcase

DINING/CONFERENCE TABLESDT-21 Dining/Conference Table

DT-33 Dining Table (Square)DT-33 Dining/Conference Table

DT-33E Dining Table with ExtensionDT-43 Dining/Conference Table

GT-43 Game/Dining Table

DT-74 Dining/Conference TableDT-74E Dining Table with Extension

DT-86 Dining Table Options:DT-86B Dining Table Base only

1.) Round with 1.5” thick table top2.) Round with 4” Apron

3.) Round with Recessed Apron4.) Round Extension with 4” Apron

5.) Round Extension with Recessed Apron6.) Racetrack with 1.5” Thick Table Top

7.) Racetrack with 4” Apron8.) Racetrack with Recessed Apron

9.) Racetrack Extension with 4” Apron10.) Racetrack Extension w/Recessed Apron11.) Rectangular Table with 4” Apron12.) Rectangular Table with Recessed Apron13.) Rectangular Extension with 4” Apron14.) Rectangular Extension w/recessed Apron

DT-89 Dining/Conference TableDT-89B Dining Table Base Only

DT-90 Dining Table with Drop LeavesDT-90A Dining/Conference Table

DT-90B Dining Table Base Only

DT-121E Dining w/Self Storing Leaf

INFO/DT-133 Dining/Conference TableDT-163 Dining/Conference Table

DT-166 Dining Table Options1.) DT-166 Round Dining Table

2.) DT-166 Rectangular Dining Table3.) DT-166 Square Dining Table

4.) DT-166 Racetrack Dining Table5.) DT-166E Round with Extension

6.) DT-166E Rectangular with Extension7.) DT-166E Square with Extension

8.) DT-166E Racetrack with Extension

ST-21S Console Table with Shelf and Drawers

ST-33S Console Table with Shelf and Drawers

DK-28M Desk

INFO/DK-128A Desk

INFO/DK-128F DeskINFO/DK-128F DeskINFO/DK-128D DeskINFO/DK-128B Desk

EFFECTIVE JANUARY 1, 2017

INDEX BY CATEGORY

A N T O I N E P R O U L X

END TABLESET-22 End/Bedside TableET-23 End/Bedside Table

ET-23S End/Bedside Table with ShelfET-26 End/Bedside Table

ET-26S End/Bedside Table with ShelfET-30 End/Bedside TableET-31 End/Bedside TableET-33 End/Bedside Table

ET-33S End/Bedside Table with ShelfET-34 End/Bedside TableET-36 End/Bedside TableET-41 End/Bedside TableET-47 End/Bedside TableET-53 End/Bedside Table

ET-54 Nesting TablesET-74 End/Bedside TableET-78 End/Bedside Table

ET-87 End/Bedside Table (Round)

ET-93 End/Bedside TableET-93S End/Bedside Table with Shelf

ET-96 End TableET-101 End/Bedside Table

ET-125 End/Bedside TablesET-126 End/Bedside Tables

ET-147S End/Bedside Table with ShelfET-148S End/Bedside Table with Shelf

ET-164 End/Bedside TableET-174A End Table

ET-176 End Table with Tray TopET-177 End/Bedside TableET-178 End/Bedside TableET-179 End/Bedside TableET-180 End/Bedside TableET-181 End/Bedside TableET-182 End/Bedside TableET-183 End/Bedside TableET-184 End/Bedside TableET-185 End/Bedside TableET-186 End/Bedside Table

ET-190 Oval End Table

FILE CABINETSFC-06 File CredenzaFC-33 File Credenza

FC-41 File CabinetFC-50 Lateral File Cabinet

FC-76 File CredenzaFC-112 File Credenza

INFO/FC-127C Credenza with Floating Top

FC-141 Mobile File Pedestal

FOLDING SCREENSFS-94 Flat Screen Partition

FLOOR LAMPSLT-187F Floor Lamp

MIRRORS

FR-27 Mirror (Narrow)

FR-115 MirrorFR-167 MirrorFR-173 MirrorFR-175 Mirror

WALL-MOUNTED SHELVESSH-134 Wall-mounted Shelves

CARE GUIDE & TEHCNICAL INFO

GREEN STATMENT

DRESSERS/BUFFETSDR-06A Dresser/Buffet

DR-11A DresserDR-33A Dresser

DR-33E BuffetDR-59A Dresser/BuffetDR-76A Dresser/Buffet

DR-77 DresserDR-102 Dresser

DR-103A Dresser/Buffet

DR-129 Dresser/BuffetINFO/DR-129

DR-147 Dresser/BuffetDR-170 Dresser/Buffet

DR-103B Dresser/BuffetDR-103E Dresser/Buffet

DR-06F Dresser/Buffet

DR-76E Dresser/Buffet

ET-174B End Table

ET-190 Square End Table

ET-87 End/Bedside Table (Square)ET-87 End/Bedside Table (Square)

MT-97B Etagere End/Bedside Table

FR-27 Mirror

EFFECTIVE JANUARY 1, 2017

INDEX BY CATEGORY

Back to Index

Back to Index

Back to Index

Back to Index

Back to Index

Back to Index

Back to Index

Back to Index

Back to Index

Back to Index

Back to Index

Back to Index

Back to Index

Back to Index