ANYWELD www.img-us.com

PAUT and TOFD Weld Inspection Solution

Motorized One Axis Scanner

for Circumferential and Longitudinal Weld Inspections

Main Features :

• PAUT and TOFD

• Circumferential or longitudinal

• Motorized, One Axis

• Compatible with any AUT flaw detector

• Magnetic or non magnetic materials

• Holds up to 8 probes (10 with dual TOFD IMG

wedges)

• Programmable Speed

• Remote control (wired or wireless)

• Up to 14 different configurations

ANYWELD www.img-us.com

PAUT and TOFD Weld Inspection Solution

A truly modular and affordable solution for any PAUT and TOFD

weld inspection

Anyweld is a magnetic wheeled scanner designed for almost

any type of one line inspection of welds. Its design allows a self

aligned scan on circumferential welds of pipes from 4" OD up

to flat, but can be used on longitudinal welds as well. The

scanner can also be used on non magnetic materials with the

optional bearing chains. Electronic Anyweld used on a AUT

validation on 10.75" CRA weld.

In the pressure equipment manufacturing branch the demand

on Automated Ultrasonic Inspection (AUT), Phased Array

and/or TOFD solutions is steadily increasing and replacing usual

radiographic examination.

Anyweld has been designed to be very compact, robust and

adaptive. It can carry from 1 PA probe, with minimized

encumbrance, up to 8 probes (10 with dual TOFD IMG wedges).

IMG proprietary design of magnetic wheels provide for

unprecedented attractive force and ensure proper traction. The

use of the scanner on non magnetic materials is ensured by

adding bearing chain, which can also be used for better scan

alignment on magnetic materials.

Anyweld embedded or external battery operated electronics

guarantees constant traction and speed control in any position.

Speed is step programmable from 2 mm/s to 100 mm/s.

Remote control can be wired or wireless (optional).

ANYWELD www.img-us.com

PAUT and TOFD Weld Inspection Solution

12V auxiliary output is available for external water

feeding pumps with on-off commands on the remote

control. The scanner can be assembled in at least 14

different configurations.

Anyweld has a laser guide for accurate positioning,

saving time in inspection.

The power unit provides a direct hi resolution encoder output which can be wired to match any AUT flaw detector

such as Sonatest (Veo and Prisma), AGR, Zetec or other equipment with encoder input.

Solutions for Ultrasonic Non-Destructive Testing (NDT)

IMG ULTRASUONI srl via agli archi 8/c , 23826 Mandello del Lario (LC) ITALY

+39 0341 733723 | img@img-us.com | www.img-us.com

REV.01 | 24/02/2016

ANYWELD www.img-us.com

PAUT and TOFD Weld Inspection Solution

Key Features

• Diameter Range: 100 mm up to flat

• Scanner encumbrance: 170 (l) x 106 (w) x 90 (h)

• Speed adjustment: 12 steps from 2 to 100 mm/s

• Weight: from 3 to 6 kg according to probes.

• Up to 8 independent gimbal gimbal spring

loaded probe holders

• Waterproof and powered led liner with

magnetic on off switch

• Fast lock fork pin release, dual bearing

attachment

• Rugged construction for harsh environment

• Zipper tube cable organizer for easy umbilical

cable opening and replacement

• Cable length and zipper tube standard 5 meters,

custom length available

• Very strong magnetic wheels

• Bearings chains for scanning on non magnetic

materials

Scanner Kit

• Anyweld main frame with single bar attachment and motor

• 1 probeholder bar

• 2 springloaded probe holders

• 2 forks with different arms length

• Motor control with 14.4 V Li-Ion Battery

• 1 Encoder cable (specify AUT flaw detector)

• 1 easy setup organizer

• 1 Run off rubber mat

• Rugged explorer case

Optional Accessories

• Full range of IMG TOFD probes and wedges

• Full range of IMG Phased Array probes and

wedges

• Electric pump with reservoir

• Spring loaded probeholders

• Zipper tube cable organizer

• Wireless scanner and pump remote control

• Dual Bar attachment with diameter adjustment

• External Battery in sealed field case

• Over the weld configuration attachment