“influence of heat treatment and natural …€¦ · efecto sinérgico sobre el crecimiento en...
TRANSCRIPT
UNIVERSIDAD POLITÉCNICA DE CARTAGENA
Departamento de Ingeniería de los Alimentos y del Equipamiento agrícola
“INFLUENCIA DE TRATAMIENTOS COMBINADOS DE CALOR Y
ANTIMICROBIANOS NATURALES EN LA VIABILIDAD DE
DISTINTOS MICROORGANISMOS”
Mª Dolores Esteban Maestre
2014
“INFLUENCE OF HEAT TREATMENT AND NATURAL ANTIMICROBIALS
IN THE VIABILITY OF DIFFERENT MICROORGANISMS”
UNIVERSIDAD POLITÉCNICA DE CARTAGENA
Departamento de Ingeniería de los Alimentos y del Equipamiento agrícola
“INFLUENCIA DE TRATAMIENTOS COMBINADOS DE CALOR Y
ANTIMICROBIANOS NATURALES EN LA VIABILIDAD DE
DISTINTOS MICROORGANISMOS”
Director: Alfredo Palop Gómez
“INFLUENCE OF HEAT TREATMENT AND NATURAL ANTIMICROBIALS
IN THE VIABILITY OF DIFFERENT MICROORGANISMS”
Memoria presentada por Mª Dolores Esteban Maestre
para optar al grado de Doctor porla Universidad Politécnica de Cartagena
A mis hijos,
Me gustaría dar mi más sincero agradecimiento a todos las personas que, de una
u otra forma, han hecho que sea posible la realización de esta tesis doctoral.
En primer lugar me gustaría dar las gracias a mi director de tesis, el Catedrático
Alfredo Palop Gómez, porque no hay palabras para agradeceter todo lo que has hecho
por mí. Por tu apoyo contínuo, por tu paciencia y por tu esfuerzo y perseverancia para
que este trabajo saliera adelante. Por todo lo que me has enseñado, y sobre todo por tu
calidad humna. Ha sido un placer trabajar contigo todos estos años.
Gracias también al Catedrático D. Pablo S. Fernández Escámez y a la Dra.
Paula M. Periago Bayonas, por haberme acogido en el departamento, por vuestros
consejos y recomendaciones.
Al Instituto de Biotecnología Vegetal, por permitirme realizar parte de este
trabajo en sus instalaciones.
Especial thanks to Prof. Mackey to let me the opportunity to work at his
Department in the University of Reading. Working under his supervision enabled me to
increase my knowledge about sublethal injury and food preservation by High
Hydrostatic Presion. Thanks to the rest of the staff for allthe help during my instance.
I also acknoeledge Prof. Leguerinel, Prof. Pin, Pro. Valdramidis and Prof.
Stéphane for kindly accepting to refer this manuscript.
A Juanpi, May, y Vera, por vuestra amistad y por estar ahí, dispuestos a
ayudarme siempre que os he necesitado. Una experiencia enriquecedora haber podido
trabajar en equipo con vosotros.
A Javi, Leymaya, Lola, Marina, Rakel, Santi y Vera por vuestra ayuda, vuestros
consejos y por vuestra compañía, que han hecho más amenas todas esas horas de
laboratorio.
A Fermín, gracias por tu paciencia, esfuerzo y profesionalidad, no se si este
trabajo habría sido posible si no hubieras estado ahí para solucionar tantos problemas.
Al Ministerio de Educación y Ciencia que ha financiado esta investigación a
través de una Beca de Formación de Personal Investigador.
A mi padre, primero por la educación que me diste cuandoera una niña, por
confiar y sobre todo, por tu amistad incondicional cuando llegué a ser adulta,
apoyándome y respentando mis decisiones, aun sabiendo que podían no ser las más
acertadas. Gracias papá. A ti mamá por ser cómo eres, fuerte y luchadora. Valores que
vendrán siempre conmigo. Gracias mamá.
Y por supuesto gracias a mi familia. A ti Álvaro por estar siempre a mi lado, por
hacerme seguir hacia delante y también por todas esas horas de apoyo logístico. Y a mis
hijos Paula, Marina y Álvaro, porque haceis que cada día merezca la pena.
RESUMEN
Los tratamientos térmicos se aplican profusamente en la industria alimentaria ya que
permiten destruir a los microorganismos y a sus enzimas de forma controlada,
garantizando, hasta ciertos niveles, la salubridad y estabilidad de los alimentos. Sin
embargo, dichos tratamientos también afectan a algunos componentes termolábiles y a
sus características organolépticas. El uso de antimicrobianos naturales es una alternativa
que, mediante su combinación con los tratamientos térmicos, permitiría disminuir la
intensidad de los mismos, conservando así sus características originales.
En esta Tesis Doctoral se eligieron como microorganismos objeto de estudio aquellos
responsables de toxiinfecciones alimentarias pertenecientes a grupos estructuralmente
distintos, para comprobar si estas diferencias podrían afectar a la eficacia de los
tratamientos aplicados. Para profundizar en el estudio de los tratamientos térmicos, se
ha hecho una especial incidencia en la investigación del efecto de las velocidades de
calentamiento, factores cuya influencia en la termorresistencia microbiana es bastante
desconocido. Se ha elegido como antimicrobianos naturales, una bacteriocinas (nisina) y
dos compuestos presentes en los aceites esenciales de hierbas aromáticas y especias
(carvacrol y timol).
Se ha investigado el efecto de las características del medio de tratamiento y de la
velocidad de calentamiento y enfriamiento sobre la resistencia al calor de esporas de
Bacillus sporothermodurans. Los resultados obtenidos para tratamientos no-
isotérmicos de 1 y 10ºC/min en distintos medios de tratamiento pudieron predecirse
adecuadamente mediante el uso de los modelos no lineales de Weibull y Geeraerd.
Se comprobó si la adición de timol al medio de calentamiento y/o de recuperación
afectaba a la termorresistencia de distintas cepas de esporos de Bacillus, obteniendo un
efecto mayor cuando este compuesto era añadido al medio de recuperación. Se pudo
plantear una ecuación que encontraba una relación entre la concentración de timol
adicionada al medio de recuperación y la disminución del valor D (valor ztimol) para cada
microorganismo estudiado. El mayor efecto se observó en Bacillus subtilis AdHC1 que
presentó un valor ztimol = 3,14.
Al estudiar el efecto de la adición de nisina sobre el crecimiento de una cepa de
Listeria monocytogenes y dos cepas de Salmonella enterica, se observó un aumento de
la fase de latencia de 13,84 a 17,03 horas para Listeria cuando se añadió 0,13 M de
nisina, pero no varió para Salmonella incluso a la concentración más alta ensayada (1,2
M). La velocidad de crecimiento se redujo ligeramente para los tres microorganismos.
El carvacrol tuvo un efecto mayor en el crecimiento de Listeria monocytogenes y
Salmonella enterica mostrando, en el caso de Listeria, un efecto dosis-dependiente que
se pudo predecir mediante modelos matemáticos secundarios.
La adición de nisina y carvacrol a células de Listeria monocytogenes y Salmonella
enterica sometidas a un tratamiento térmico previo de 15 minutos a 55ºC mostró un
efecto sinérgico sobre el crecimiento en caldo de Listeria y un efecto aditivo en el caso
de Salmonella. El efecto sinérgico hallado en Listeria se encontró también cuando el
crecimiento se realizó en una matriz alimentaria.
ABSTRACT
Heat treatments are widely extended in food industry since they are able to inactivate
microorganisms and their enzymes in a controlled way, ensuring food safety and
stability to certain levels. Nevertheless, these treatments have negative effects on heat
sensitive compounds and on the organoleptic characteristics of foods. The use of natural
antimicrobials is an alternative that, in combination with heat treatments, would help to
decrease their intensity, preserving the natural characteristics of the products.
In this Thesis, the microorganisms were chosen among those responsible for food
poisoning outbreaks and belonging to different structural groups, in order to check if the
differences would affect the efficiency of the treatments applied. With the aim of going
in depth of the heat treatments. A special emphasis has been paid to the heating rates,
applied during thermal treatments, since the influence of this factor on the heat
resistance of microorganisms is quite unknown. As natural antimicrobials, a bacteriocin
(nisin) and two compounds present in the essential oils of aromatic herbs and spices
(carvacrol and thymol) were chosen.
The effect of the medium characteristics and of the heating and cooling rates on the
heat resistance of Bacillus sporothermodurans spores has been investigated. The results
obtained for non-isothermal heat treatments at 1 and 10ºC/min in different treatment
media were accurately predicted by the non-linear models of Weibull and Geeraerd.
The impact of the addition of thymol to the heating and/or recovery medium on the
heat resistance of different strains of Bacillus spores was tested. The reults showed a
greater effect when thymol was added to the recovery medium than when it was added
to the heating medium. Moreover, a relationship between the thymol concentration
added to the recovery medium and the decrease in the Dvalue was found. This
relationship was expressed as a mathematical equation (zthymol) for each microorganism
under research. The biggest effect was shown for Bacillus subtilis AdHC1, with a zthymol
= 3.14.
The effect of the addition of nisin on the growth of one strain of Listeria
monocytogenes and two strains of Salmonella enterica was also studied. An increase in
the lag phase from 13.84 to 17.03 hours was found for Listeria when a concentration
0.13 M nisin was added, but no delay in the lag phase of Salmonella was shown, even
for the highest concentration tested (1.2 M). The growth rate was slightly decreased
for the three microorganisms under study.
Carvacrol had a higher effect than nisin on the growth of Listeria monocytogenes and
Salmonella enterica, showing, a dose-dependent effect for Listeria that could be
predicted by mathematical secondary models.
The addition of nisin and carvacrol to Listeria monocytogenes and Salmonella
enterica cells, previously heat treated to 55ºC for 15 minutes, showed a synergistic
effect on the growth on broth of Listeria and an additive effect for Salmonella. The
synergistic effect found for Listeria in broth was was also found in a food matrix.
ÍNDICE
III Índice
1. INTRODUCCIÓN ...................................................................................................... 5
1.1. MICROORGANISMOS DE INTERÉS EN LOS ALIMENTOS. .............................................. 8
1.1.1. Estructura celular de las bacterias: Bacterias Gram-positivas y Gram negativas. ............ 9 1.1.1.1. La membrana plasmática. ................................................................................................ 10 1.1.1.2. La pared celular. .............................................................................................................. 10
1.1.2. Bacterias Gram-positivas: Listeria monocytogenes. ............................................................ 12 1.1.3. Bacterias Gram-negativas: Salmonella spp. ......................................................................... 13 1.1.4. Bacterias esporuladas: Bacillus spp. ..................................................................................... 14
1.1.4.1. Bacillus sporothermodurans. ......................................................................................... 14 1.1.4.2. Bacillus cereus. ............................................................................................................... 16 1.1.4.3. Bacillus subtilis. .............................................................................................................. 17 1.1.4.4. Bacillus licheniformis. ..................................................................................................... 17
1.2. CRECIMIENTO MICROBIANO. .............................................................................................. 18
1.2.1. La curva de crecimiento microbiano. ................................................................................... 18 1.2.2. Factores que afectan al crecimiento microbiano. ................................................................ 19 1.2.3. Modelización de la curva de crecimiento microbiano. ........................................................ 20
1.3. LOS TRATAMIENTOS TÉRMICOS EN LA CONSERVACIÓN DE ALIMENTOS.......... 22
1.3.1. Pasteurización. ....................................................................................................................... 22 1.3.2. Esterilización. ......................................................................................................................... 23
1.4. CINÉTICA DE DESTRUCCIÓN MICROBIANA POR CALOR. .......................................... 23
1.4.1. Inactivación de microorganismos en condiciones isotérmicas. .......................................... 24 1.4.1.1. Curvas de supervivencia no logarítmicas. ....................................................................... 26 1.4.1.2. Modelización de la curva de supervivencia. ................................................................ 27
1.4.1.2.1. El modelo de Weibull. ........................................................................................... 28 1.4.1.2.2. El modelo de Geeraerd. ........................................................................................ 30
1.4.2. Efecto de la temperatura de tratamiento en la inactivación de microorganismos. .......... 31 1.4.3. Inactivación de microorganismos en condiciones no isotérmicas. ..................................... 32
1.4.3.1. Modelo de Weibull .......................................................................................................... 33 1.4.3.2. Modelo de Geeraerd ........................................................................................................ 33
1.5. DAÑO SUBLETAL ...................................................................................................................... 34
1.6. MECANISMOS DE ADAPTACIÓN Y RESISTENCIA. ......................................................... 34
1.7. LOS ANTIMICROBIANOS NATURALES COMO MÉTODO ALTERNATIVO PARA LA
CONSERVACIÓN DE ALIMENTOS. .............................................................................................. 36
1.7.1. Nisina. ...................................................................................................................................... 37 1.7.1.1. Mecanismo de acción. ..................................................................................................... 37 1.7.1.2. Aplicaciones. ................................................................................................................... 38 1.7.2. Aceites esenciales. ............................................................................................................. 40 1.7.2.1. Carvacrol. ....................................................................................................................... 40 1.7.2.2. Timol. .............................................................................................................................. 41 1.7.2.3. Mecanismo de acción ..................................................................................................... 41
1.8. MÉTODOS COMBINADOS DE CONSERVACIÓN. .............................................................. 45
1.9. TÉCNICAS RÁPIDAS DE DETECCIÓN DE MICROORGANISMOS: LA CITOMETRÁ
DE FLUJO. .......................................................................................................................................... 46
2. JUSTIFICACIÓN Y OBJETIVOS ......................................................................... 49
3. AIM AND IMPACT ................................................................................................. 54
4. MATERIALES Y MÉTODOS ................................................................................ 58
4.1. Microorganismos. ......................................................................................................................... 60
4.2. Preparación de los microorganismos. ......................................................................................... 61
4.2.1. Células vegetativas. ................................................................................................................ 61 4.2.2. Esporas. ................................................................................................................................... 61
4.3. Compuestos químicos. .................................................................................................................. 62
4.4. Preparación del zumo de zanahoria. ........................................................................................... 62
4.5. Curvas de crecimiento. ................................................................................................................. 63
4.5.1. Curvas de crecimiento realizadas por medida de la absorbancia en un
espectrofotómetro. ........................................................................................................................... 63 4.5.2. Curvas de crecimiento realizadas por medida de la absorbancia en un Bioscreen. ......... 64 4.5.3. Curvas de crecimiento realizadas por recuento en placa. .................................................. 64 4.5.4. Tratamiento térmico previo. ................................................................................................. 64 4.5.5. Modelización de las curvas de crecimiento. ......................................................................... 65 4.5.6. Análisis estadístico. ................................................................................................................ 66
4.6. Determinación de la resistencia térmica. .................................................................................... 66
4.6.1. El termorresistómetro Mastia. .............................................................................................. 66 4.6.2. Determinaciones de termorresistencia de microorganismos en el termorresistómetro
Mastia. ............................................................................................................................................... 68 4.6.3. Recuperación de supervivientes. ........................................................................................... 69 4.6.4. Análisis de datos. .................................................................................................................... 70
4.6.4.1. Cálculo de los valores D y z en condiciones isotérmicas. ............................................ 70 4.6.4.2. Modelo de Weibull. ........................................................................................................ 71 4.6.4.3. Modelo de Geeraerd. ..................................................................................................... 72 4.6.4.4. Predicción del número de supervivientes en condiciones no isotérmicas. ................ 72
4.6.5. Análisis estadístico. ................................................................................................................ 73
4.7. Citometría de flujo. ....................................................................................................................... 73
4.7.1. El citómetro de flujo. ............................................................................................................. 73 4.7.2. Fluorocromos. ......................................................................................................................... 74 4.7.3. Preparación de las muestras. ................................................................................................ 74 4.7.4. Adquisición de muestras. ....................................................................................................... 76 4.7.5. Recuento en placa................................................................................................................... 76 4.7.6. Análisis de datos. .................................................................................................................... 76
5. RESULTADOS ......................................................................................................... 77
5.1. CAPITULO I: “Efecto de las características del medio y de la velocidad de calentamiento y
enfriamiento en la resistencia al calor en condiciones no isotérmicas de esporos de Bacillus
sporothermodurans IC4.” .................................................................................................................... 79
5.2. CAPITULO II: “Efecto del timol en el medio de calentamiento y de recuperación sobre la
resistencia al calor de esporos de Bacillus en condiciones isotérmicas y no isotérmicas” ............. 89
5.3. CAPITULO III: “Nisina carvacrol y sus combinaciones en el crecimiento de células de
Listeria monocytogenes tratadas termicamente.” ............................................................................ 100
5.4. CAPITULO IV: “Efecto combinado effect of nisin, carvacrol and a previous thermal
treatment on the growth of Salmonella enteritidis and Salmonella senftenberg.” ....................... 110
5.5. CAPITULO V: “Evaluación de la viabilidad de Listeria monocytogenes expuesta a calor y
antimicrobianos naturales mediante citometría de flujo” .............................................................. 120
6. CONCLUSIONES .................................................................................................. 134
7. CONCLUSIONS ..................................................................................................... 139
8. REFERENCIAS ..................................................................................................... 144
1. INTRODUCCIÓN
El hombre, en sus orígenes era nómada, y para poder alimentarse iba de un lugar a
otro, buscando siempre zonas con agua, y abundante caza y pesca. Con el transcurso del
tiempo, el hombre fue evolucionando, y comenzó a producir y almacenar sus propios
alimentos. Ya entonces, era evidente la alteración de los alimentos por los
microorganismos y la muerte por ingesta de alimentos contaminados. Así que sin tener
constancia de la existencia de los microorganismos, los sumerios, 3000 años antes de
Cristo, empezaron a conservar de la carne y el pescado por medio del uso de salazones.
Más tarde, surgieron otras técnicas de conservación y elaboración de alimentos, como la
conservación en aceite, el ahumado, el secado al sol, las fermentaciones naturales, la
7
transformación de cereales en pan y la reducción de la actividad acuosa por el agregado
de azúcar y sal.
Sin embargo, no fue hasta el siglo XIX cuando se produjo un cambio significativo en
los métodos de conservación de alimentos. La revolución industrial originó un
desarrollo tal de las ciudades que los métodos artesanales de producción de alimentos
eran insuficientes para abastecer las necesidades de toda la población. Esto hizo
necesario el desarrollo de la producción de alimentos a escala industrial y también del
transporte, ya que estas industrias necesitaban abastecerse de materias primas, obtenidas
en ocasiones a gran distancia del lugar de demanda. Era por tanto necesaria la
conservación, y el almacenamiento y transporte tanto de las materias primas como de
los alimentos procesados.
Con el desarrollo de la ciencia y la tecnología, la conservación de alimentos
evolucionó con gran rapidez, estableciéndose las bases científicas de la conservación de
los alimentos, hasta entonces aplicadas de forma empírica en los métodos tradicionales.
Aunque el descubrimiento de la existencia de los microorganismos se atribuye a Antony
van Leeuwenhoek, en 1693, gracias a la invención del microscopio, no fue hasta casi
dos siglos más tarde, en que Louis Pasteur reconoció el importante papel que juegan
éstos en la alteración de muchos alimentos.
1.1. MICROORGANISMOS DE INTERÉS EN LOS ALIMENTOS.
La naturaleza biológica de los alimentos, sus propiedades físico-químicas y la
disponibilidad de sus nutrientes, los convierten en un sustrato idóneo para el desarrollo
de microorganismos. Además, estas características de los alimentos también son
determinantes en el efecto que un posible tratamiento de conservación pueda tener sobre
un microorganismo determinado, ya que varios estudios han comprobado la existencia
de un efecto protector de algunos compuestos de los alimentos sobre los
microorganismos cuando los alimentos eran sometidos a distintas técnicas de
conservación (Delgado et al., 2004; Pagan et al., 2005). Así mismo, estos métodos de
conservación también pueden modificar estas características e influir en el deterioro de
los mismos.
8
Los principales tipos de microorganismos que participan en el deterioro de los
alimentos son bacterias, hongos filamentosos y levaduras. Estos pueden atacar
prácticamente todos los componentes de los alimentos, e incluso si los colonizan de
forma simultánea, favorecer unos el desarrollo de otros (Davis et al., 1996).
Estos microorganismos son de un gran interés para la industria agroalimentaria, no
sólo desde un punto de vista económico, por las elevadas pérdidas producidas por los
microorganismos alterantes de alimentos, sino también desde un punto de vista
sanitario, ya que son muchos los microorganismos patógenos, causantes de
toxinfecciones alimentarias (Davidson, 2001). De hecho, la Organización Mundial de la
Salud (OMS) considera a la diarrea por intoxicación de origen alimentario como la
enfermedad más común y más ampliamente diseminada en poblaciones humanas en el
mundo; para 1999 se estimaron 1.500 millones de casos al año y 3 millones de muertes
de niños (WHO, 1999).
Para intentar saber cómo las distintas técnicas de conservación pueden afectar a cada
microorganismo es necesario conocer su estructura y fisiología. Por esto, para la
realización de esta Tesis Doctoral se eligieron microrganismos con características
estructurales y fisiológicas distintas: células vegetativas Gram-positivas y Gram-
negativas y esporos.
1.1.1. Estructura celular de las bacterias: Bacterias Gram-positivas y Gram
negativas.
En función de las estructuras celulares que envuelven la célula, las bacterias se
dividen en dos grandes grupos taxonómicos: Gram-positivas y Gram-negativas (figura
1.1). La envoltura celular de las bacterias Gram-positivas comprende la membrana
citoplasmática y una pared celular compuesta por una gruesa capa de peptidoglicano,
que rodea a la anterior. A diferencia de éstas, las bacterias Gram-negativas, presentan
una segunda membrana lipídica externa a la capa de peptidoglicano, la cual es mucho
más delgada. Entre la membrana plasmática y la pared celular se encuentra el
periplasma o espacio periplasmático. En el interior de la membrana plasmática se
encuentra el citoplasma que está constituido por una disolución acuosa, en la que
existen gran variedad de sustancias como: sales, azúcares, aminoácidos, vitaminas y
9
coenzimas, y en el centro se ubica la zona menos densa llamada nucleoide, cuyo
principal componente es el ADN.
1.1.1.1. La membrana plasmática.
La membrana citoplasmática está constituida por una bicapa fosfolipídica, compuesta
por ácidos grasos y glicerol. En esta membrana lipídica se pueden encontrar proteínas
embebidas, tanto integrales como periféricas. La estructura de la membrana cito-
plasmática se estabiliza mediante puentes de hidrógeno e interacciones hidrofóbicas.
Además, cationes como Mg2+ y Ca2+ contribuyen a la estabilización de la membrana
mediante interacciones iónicas con los grupos polares con carga negativa presentes en
los fosfolípidos.
En todo el rango de temperatura de crecimiento de las bacterias, los fosfolípidos y las
proteínas presentan cierta fluidez, lo que le confiere permeabilidad a la membrana. Esta
permeabilidad otorga a la membrana la función de barrera selectiva, permitiendo la
entrada de determinados metabolitos y la salida de las sustancias de desecho, ya que el
paso de estas sustancias se realiza mayoritariamente por transporte activo.
1.1.1.2. La pared celular.
Las bacterias Gram-positivas presentan una capa de peptidoglicano muy gruesa
(figura 1.1), que es responsable de la retención de los tintes violetas durante la tinción
de Gram. Este peptidoglicano es un polímero de N-acetil-2-D-glucosamina, unido en
orientación ß-1,4 con ácido N-acetil murámico. A éste se agrega por el grupo lactilo un
péptido formado por cuatro o más aminoácidos. Esta molécula se polimeriza gran
cantidad de veces, de modo que se forma una malla especial, llamada sáculo de
mureína. Dicho compuesto es de vital importancia para conservar la forma y darle
rigidez a la célula bacteriana (si este compuesto no existiese, la célula reventaría debido
a su gran potencial osmótico). Las paredes celulares Gram-positivas contienen unos
polialcoholes denominados ácidos teicoicos, algunos de los cuales se enlazan con
lípidos para formar ácidos lipoteicoicos. Puesto que los ácidos lipoteicoicos tienen
10
enlaces covalentes con los lípidos de la membrana citoplásmica, son responsables de
enlazar el peptidoglicano a la membrana citoplásmica. Los ácidos teicoicos dan a la
pared celular Gram-positiva una carga negativa total debido a la presencia de los
enlaces de fosfodiéster entre los monómeros del ácido teicoico.
La pared celular de las bacterias Gram-negativas, por el contrario, contiene una capa
fina de peptidoglicano adyacente a la membrana citoplásmica, que es insuficiente para
conservar el color violeta en la decoloración con etanol durante la tinción de Gram.
Además de la capa de peptidoglicano, las bacterias Gram-negativas presentan una
membrana externa adicional semejante a la membrana citoplasmática (figura 1.1),
compuesta por fosfolípidos, proteinas y lipopolisacáridos. La naturaleza altamente
cargada de los lipopolisacáridos confiere una carga negativa total a la pared. La
estructura química de los lipopolisacáridos externos de la membrana es a menudo única
a las cepas bacterianas específicas y es responsable de muchas de las características
antigénicas de estas cepas.
Como en el caso de la membrana citoplasmática, la parte lípidica de la membrana
externa es, en gran parte, impermeable a todas las moléculas cargadas. Sin embargo,
unos canales denominados porinas, presentes en la membrana externa, permiten el
transporte pasivo de muchos iones, azúcares y aminoácidos a través de la membrana
externa. Estas moléculas están, por lo tanto, presentes en el periplasma, la región
comprendida entre las membranas citoplasmática y exterior. El periplasma contiene la
capa de peptidoglicano y muchas proteínas responsables de la unión al substrato,
hidrólisis y recepción de señales extracelulares. Se supone que el periplasma se
encuentra en un estado de tipo gel más que en estado líquido debido a la alta
concentración de proteínas y de peptidoglicano que contiene. Debido a la localización
del periplasma entre las membranas citoplásmica y externa, las señales recibidas y los
substratos son transportados mediante las proteínas que contiene.
11
Figura 1.1. Estructura de la envoltura de una bacteria Gram-positiva y de una
bacteria Gram-negativa (fuente: biologia.laguia2000.com)
1.1.2. Bacterias Gram-positivas: Listeria monocytogenes.
Listeria monocytogenes es una bacteria bacilar, anaerobia facultativa, móvil a 20-
25ºC, gracias a la presencia de un flagelo en posición distal, pero inmóvil a 37ºC. Es un
microrganismo capaz de crecer a temperaturas de refrigeración y en un amplio rango de
pH. También es capaz de crecer a elevadas concentraciones de NaCl (Farber y Peterkin.,
2000). Además este microrganismo posee una gran capacidad de adaptación al medio lo
cual le permite sobrevivir a diversos cambios (Chaturongakul. et al., 2008). L.
monocytogenes es un patógeno oportunista, capaz de sobrevivir y multiplicarse fuera de
hospedadores animales y en medios nutritivos muy simples. L. monocytogenes ha sido
aislada de gran variedad de hábitats, como el suelo, aguas residuales, aire de salas de
procesado de alimentos, carne, marisco crudo, hortalizas, heces de personas y animales
sanos, y leche.
L. monocytogenes es el agente causal de la listeriosis, enfermedad de gran relevancia
para la salud pública dada su gravedad, ya que puede provocar la muerte por meningitis
y septicemia en niños, ancianos y personas inmunodeprimidas, presenta un alto índice
de mortalidad, causando la muerte del 20-30% de las personas infectadas. El 99% de las
listeriosis producidas en humanos son de origen alimentario (Mead et al., 1999). Dado
que la contaminación de alimentos por L. monocytogenes suele ser baja, y que la dosis
infectiva de humanos es relativamente alta (Vázquez-Boland et al., 2001), la alta tasa de
12
incidencia de listeriosis en humanos se debe a la capacidad de L. monocytogenes de
sobrevivir a distintas técnicas de procesado y a su capacidad para multiplicarse a
temperaturas de refrigeración.
Por todo esto, L. monocytogenes es un microorganismo objeto de gran número de
investigaciones realizadas sobre nuevas técnicas de conservación en productos listos
para el consumo conservados a temperaturas de refrigeración durante largo tiempo, ya
que, en los últimos años, han sido los productos de mayor riesgo (Rocourt y Cossart,
2000).
1.1.3. Bacterias Gram-negativas: Salmonella spp.
Las bacterias pertenecientes al género Salmonella son microorganismos patógenos
que actualmente se encuentran englobadas dentro de la familia de las enterobacterias.
Son bacilos Gram- negativos, no formadores de esporos, anaerobios facultativos y
presentan flagelos peritricos. Son microorganismos capaces de crecer en un alto rango
de temperaturas, desde 5,2 hasta 46ºC, y en un amplio rango de pH desde 3,8 hasta 9,5.
La capacidad de este microrganismo para resistir condiciones extremas de pH y
temperatura, unido al hecho de que puedan sobrevivir largos periodos de tiempo en los
alimentos, le permiten en determinadas ocasiones sobrevivir a determinados
tratamientos de conservación y posteriormente desarrollarse durante el almacenamiento,
inclusive a temperaturas de refrigeración.
Salmonella Enteritidis y Salmonella Typhimurium son las serovariedades
relacionadas mayoritariamente con los brotes de intoxicaciones alimentarias (Doyle y
Mazzota, 2000). Sin embargo, otras serovariedades altamente termorresistentes, como
Salmonella Senftenberg, también han sido las causantes de distintos brotes (L’Ecuyer et
al., 1996; Rushdy et al., 1998). Es un microorganismo causante de enfermedades
gastrointestinales, principalmente diarreas, que incluso pueden llevar a la muerte si no
son tratadas debidamente (Rattanachaikunsopon y Phumkhachorn, 2010). Es el
responsable de 14,43 casos de toxiinfecciones alimentarias por cada 100.000 habitantes
(CDC, 2006). Esto hace que sea uno de los microorganismos responsables de la mayoría
de las toxiinfecciones alimentarias declaradas a nivel mundial y, por lo tanto, objeto de
gran número de estudios en la industria agroalimentaria.
13
1.1.4. Bacterias esporuladas: Bacillus spp.
Ciertas bacterias Gram-positivas pueden sintetizar una forma de resistencia
bacteriana, el esporo, que les permite sobrevivir en condiciones desfavorables, y que, se
puede transformar de nuevo en forma vegetativa cuando las condiciones del medio
vuelven a ser favorables. Las bacterias esporuladas, debido a su elevada resistencia al
calor y a otras condiciones adversas, tienen un gran interés en la industria
agroalimentaria.
El género Bacillus esta compuesto por bacilos Gram-positivos capaces de formar
esporos, estrictamente aerobios o anaerobios facultativos. Estos microorganismos se
encuentran en frutas y vegetales y, sus esporos, son capaces de resistir las condiciones
de esterilización, causando daños y alterando las conservas. No obstante su rango de
pHs de crecimiento con un mínimo siempre por encima de 4, les impide desarrollarse en
alimentos ácidos. Presentan un amplio rango temperatura de crecimiento, que va desde
los 4 hasta los 75ºC (Prescott et al., 2002).
Existen más de sesenta especies distintas ampliamente distribuidas en la naturaleza.
1.1.4.1. Bacillus sporothermodurans.
Tradicionalmente la especie más termorresistente del género Bacillus ha sido
Bacillus stearothermophillus, reclasificada en la actualidad dentro del género
Geobacillus (Nazina et al., 2001). No obstante, varios autores (Foschino et al., 1990;
Kessler et al., 1994; Haummer et al., 1995) publicaron la existencia de bacterias
mesófilas formadoras de esporos termorresistentes causantes de la no esterilidad de la
leche UHT. Investigaciones moleculares sobre el RNAr de la fracción 16S de los
ribosomas de estas bacteias mostraron que se trataba de una nueva especie de Bacillus
(Klijn et al., 1994) la cual, fue aislada por primera vez en 1990 en leche esterilizada por
UHT en Alemania y descrita por Petterson et al., (1996) como Bacillus
sporothermodurans.
Su capacidad para poder sobrevivir a estos tratamientos radica en su elevada
termorresistencia, ya que es capaz de sobrevivir a un tratamiento térmico de 130ºC
durante 4 segundos (Huemer et al., 1998), a su inusual cinética de termodestrucción, y a
14
su capacidad para germinar durante el almacenamiento de estos productos, alterando sus
características organolépticas debido a su actividad proteolítica y, por tanto, reduciendo
su vida útil. Los daños que este microorganismo provoca en la leche se manifiestan en
cambios de color y sabor de la leche y desestabilización de la caseina (Klijn et al.,
1997). Un aumento de la temperatura y el tiempo de tratamiento para inactivar B.
sporothermodurans afecta notablemente a las características organolépticas y
nutricionales de la leche (Claeys et al., 2001). B. sporothermodurans también fue
aislado en sopa con curry india la cual había recibido un tratamiento térmico con un Fo
mínimo de 8,9 minutos (Oomes et al., 2007).
Van Zuijlen et al. (2009) realizaron un estudio sobre cómo afectan las condiciones de
esporulación a la termorresistencia de Bacillus sporothermodurans IC4, obteniendo los
valores de termorresistencia mas altos a 121ºC, 4,1 y 4,34 min., respectivamente, en el
agar de esporulación Campden (Campden sporulation agar, CSA) y en el agar nutritivo
fortificado (Fortified Nutrient Agar; FNA). Los valores de termorresistencia obtenidos
con agar con extracto de sopa de champiñones (Mushroom soap agar; MSA; D121=2,87
min.) y con agar nutritivo (D121 2,7 min.) fueron netamente inferiores. En su estudio
concluyeron que B. sportothermodurans es un microorganismo adecuado para evaluar y
optimizar procesos de esterilización de alimentos porque sus esporos tienen una
termorresistencia constante y adecuada, la cual puede llegar a ser máxima utilizando
diferentes medios de esporulación. Por todo ello, concluye que estos esporos son más
adecuados para la validación de procesos, que por ejemplo, los esporos de Geobacillus
stearothermophilus utilizados normalmente para este fin.
Su elevada termorresistencia lo hace una de las especies más termorresistentes del
genero Bacillus por lo que está siendo utilizada como microorganismo de referencia
para la evaluación biológica de tratamientos térmicos (Periago, et al., 2004). A pesar de
ello existen pocos datos sobre su comportamiento frente a los tratamientos térmicos,
posiblemente debido a su reciente descubrimiento.
Los estudios realizados por Periago et al., (2004), mostraron que las curvas de
supervivencia isotérmicas de B. sporothermodurans en diferentes sopas son claramente
no lineales. Por lo tanto, ninguno de los métodos convencionales basados en la
linealidad del logaritmo de supervivientes frente al tiempo puede ser utilizado para
predecir su inactivación. Van Zuijlen et al., (2009), también observaron la presencia de
15
hombros en las curvas de supervivencia de estos esporos obtenidas tanto en tubos
capilares como en el termorresistómetro, lo que corrobora estudios previos y confirma
que esto es un fenómeno común en esporos de alta termorresistencia (Cook y Brown,
1965; David y Merson, 1990). Además publicaron que los modelos de Weibull y
Geeraerd que describían mejor la inactivación de los esporos de B. sporothermodurans
que los modelos logarítmicos lineales convencionales.
1.1.4.2. Bacillus cereus.
Los microorganismos pertenecientes a esta especie producen dos tipos de
enfermedades alimentarias, el síndrome emético y el diarreico. El síndrome emético o
de vómitos ha sido asociado a una toxina termoestable, capaz de permanecer activa
durante dos meses almacenada a 4ºC. A diferencia de la toxina diarreica, la toxina
emética se produce durante la fase estacionaria del crecimiento. El número de
microorganismos necesarios para provocar el síndrome emético es mayor que el número
necesario para provocar el síndrome diarreico. Ambas enfermedades gastrointestinales
presentan, generalmente, síntomas moderados, que desaparecen en unas 24 horas y son
muy similares a otras enfermedades producidas por patógenos alimentarios, por lo que
la incidencia de estos microorganismos puede ser infra estimada. Sin embargo, las
enfermedades no gastrointestinales, son reportadas como enfermedades sistémicas,
normalmente asociadas con pacientes inmunodeprimidos (Kotiranta et al., 2000).
B. cereus es, del género Bacillus, el principal agente causal de las infecciones
gastrointestinales debido a la producción de un amplio rango de factores de virulencia.
Aunque los procesos heméticos y diarreicos son moderados, se han descrito casos
severos e incluso en algunos casos han provocado la muerte (Lund et al., 2000).
Además, B. cereus es el responsable de infecciones locales y sistémicas entre las que se
incluyen queratitis, endoftalmitis, panoftalmitis, periodontitis, meningitis, neumonía,
infecciones del tracto urinario y fallos renales letales (Beecher et al., 2000; Kotiranta et
al., 2000) especialmente en pacientes inmunodeprimidos, neonatos, drogadictos, heridas
quirúrgicas y catéteres (Drobniewski, 1993; Kotiranta et al., 2000;Hilliard et al., 2003).
16
1.1.4.3. Bacillus subtilis.
Es una especie típicamente mesófila, con temperaturas óptimas de crecimiento y
esporulación próximas a 32ºC. Este microorganismo no está considerado como
patógeno humano. Sin embargo, puede contaminar los alimentos, aunque raramente
causa intoxicación alimenticia. Pese a que tradicionalmente se ha considerado de baja
termorresistencia (Stumbo, 1965), y consecuentemente de escasa repercusión en la
alteración de productos esterilizados, ha sido aislado repetidamente en alimentos
tratados por el calor, desde conservas vegetales acidificadas (Fields et al., 1977) hasta
leches esterilizadas, incluso a temperaturas ultraelevadas (Davies, 1975). Por esto, B.
subtilis, es una de las especies más investigadas y de la que todavía no se han resuelto
las causas de su inesperada supervivencia. Además, B. subtilis se ha mostrado muy
manejable para la manipulación genética, por lo que se ha adoptado como un organismo
modelo para estudios de laboratorio, sobre todo de esporulación.
B. subtilis ha sido identificado como uno de los agentes causales de enfermedades
transmitidas por alimentos en el Reino Unido, Australia, Nueva Zelanda y Canadá. Los
alimentos contaminados que han provocado todos estos síntomas han sido carne,
mariscos, pasta y arroz. Los niveles de B. subtilis encontrados en estos alimentos
oscilaban en un rango de 105 a 109 ufc/g (Robinson et al., 1999). El comienzo de los
síntomas, que típicamente incluyen diarrea y vómitos, puede ocurrir en un corto periodo
de tiempo, de 10 minutos a 14 horas y la duración de estos síntomas puede durar desde
1,5 a 8 horas (Robinson et al., 1999). Otros síntomas que pueden aparecer son dolor
abdominal y náuseas.
1.1.4.4. Bacillus licheniformis.
Es un microorganismo muy ubicuo, ya que lo podemos encontrar en la tierra y en el
polvo, por lo que ha sido asociado frecuente como contaminante de alimentos y
enfermedades alimentarias (Salkinoja et al., 1999). Es conocido como un
microorganismo alterante del pan, la leche (Mostert et al., 1979; Foschino et al., 1990),
17
carnes envasadas (Bell y DeLacy, 1984), y algunos productos enlatados (Norris et al.,
1981).
Generalmente, produce afecciones gastrointestinales que cursan con diarreas,
vómitos, e incluso en casos más graves pueden producir septicemias. También puede
producir oftalmitis, abortos y afectar a la movilidad del esperma.
1.2. CRECIMIENTO MICROBIANO.
Conocer cómo crecen los microorganismos y los distintos factores que pueden influir
sobre su crecimiento es fundamental para poder controlar y predecir el crecimiento de
los mismos en los alimentos.
1.2.1. La curva de crecimiento microbiano.
Cuando una bacteria encuentra unas condiciones óptimas para su crecimiento,
comienza a multiplicarse de forma activa. Este crecimiento bacteriano se da en cuatro
fases diferenciadas, como se muestra en la figura 1.2.
Figura 1.2. Curva de crecimiento microbiano.
Fase latencia
Fase exponencial
Fase estacionaria
Fase de muerte
Tiempo
Núm
ero d
e cé
lula
s
18
La primera de las fases del crecimiento es la fase de latencia, en ella, los
microorganismos se adaptan a su nuevo ambiente. Para ello, llevan a cabo una serie de
modificaciones fisiológicas necesarias para poder adaptarse a este nuevo medio y crecer
en él. En esta fase no hay multiplicación celular, sólo se genera la energía necesaria para
comenzar a multiplicarse y entrar en la fase siguiente. La duración de la fase de latencia
se conoce como ().
La siguiente fase es la fase exponencial o de crecimiento logarítmico. En esta fase los
microorganismos se multiplican activamente por fisión binaria. El paso de una fase a
otra no es brusco sino que se produce de forma gradual. Se aprecia así un aumento
progresivo de la velocidad de duplicación, hasta llegar a un punto en el que todas las
células se están multiplicando y la tasa de crecimiento es máxima. La tangente a esta
curva en su punto de inflexión nos dará la tasa de crecimiento máxima ().
Debido al crecimiento masivo de la fase anterior, se produce un acumulo de
metabolitos tóxicos y/o un agotamiento de los nutrientes, lo que hace que las células
dejan progresivamente de multiplicarse, y entran en fase de crecimiento estacionario, en
la que se alcanza un equilibrio entre las células que todavía se están multiplicando y las
que comienzan a morir, de manera que la concentración de microorganismos se
mantiene constante.
Finalmente, cuando el número de células que mueren es mayor que el número de
células que se dividen los microorganismos entran en fase de declinación o muerte,
observándose un descenso progresivo en el número de microorganismos.
1.2.2. Factores que afectan al crecimiento microbiano.
El crecimiento microbiano se puede ver afectado por una serie de factores:
intrínsecos y/o extrínsecos. Se entienden por factores intrínsecos aquellos que son
característicos del propio alimento: pH, aw, contenido de nutrientes, presencia de
sustancias inhibidoras,…
Y cómo factores extrínsecos a aquellos propios del ambiente en el que se encuentra
el alimento, como son: la temperatura, la humedad relativa y los gases. Son sobre estos
últimos sobre los que realmente podemos actuar para poder controlar el crecimiento de
los microorganismos.
19
La temperatura es uno de los factores más importantes, debido a su influencia en el
crecimiento de los microorganismos. La temperatura puede influir tanto en la duración
de la fase de latencia, como en la velocidad de crecimiento y hasta en el número final de
microorganismos. En general, las temperaturas bajas prolongan la fase de latencia y
disminuyen la velocidad de crecimiento. Estas temperaturas por debajo de la mínima de
crecimiento no destruyen a los microorganismos, solo inhiben su crecimiento Además,
las temperaturas de congelación hacen que se formen cristales de hielo que pueden
llegar a dañar la membrana y pared de los microorganismos, produciendo en muchos
casos la muerte celular. A este efecto de la temperatura, también habría que sumar el
efecto de la baja aw sobre los microorganismos que sean capaces de sobrevivir a estas
temperaturas. Las temperaturas que se encuentran por encima de la temperatura máxima
de crecimiento son letales para los microorganismos. Cuanto más alta sea esta
temperatura, más rápidamente se producirá la destrucción de los microorganismos.
Además de todos estos factores, también hay que considerar los factores implícitos
de cada microorganismo, que están altamente influenciados por los factores
ambientales. El principal es la velocidad específica de crecimiento. Esta depende de las
reacciones implicadas en el metabolismo del microorganismo, es decir, de su equipo
enzimático, y por tanto depende directamente del genotipo, pero depende también de
factores fenotípicos, es decir, del ambiente.
1.2.3. Modelización de la curva de crecimiento microbiano.
Como se puede observar en la figura 1.4, las tres primeras fases de la curva de
crecimiento forman en su conjunto una curva aproximadamente sigmoidea. Por esto, en
los últimos años, se han adaptado distintas funciones matemáticas sigmoideas (como la
de Gompertz o la logística) para poder describir las curvas de crecimiento microbiano.
La mayoría de los autores están de acuerdo en que la función de Gompertz, que describe
una curva sigmoidea asimétrica, está definida por la ecuación 1.1 (Zwietering et al.,
1990):
Ec. 1.1
20
donde Nt es el número de microorganismos a tiempo t, N0 es el número inicial de
microorganismos, C es el número de ciclos logarítmicos de crecimiento, es la
duración de la fase de latencia, que corresponde al corte de la tangente al punto de
inflexión con la asíntota inferior y es la tasa máxima de crecimiento.
Sin embargo, el modelo de Gompertz, en sus diferentes formas, presenta ciertos
inconvenientes. Este modelo sólo describe la curva de crecimiento si ésta tiene la forma
de una curva sigmoidea y, por ejemplo, no tiene en cuenta la posibilidad de que no
exista fase de latencia. Además, para poder definir bien una curva de crecimiento,
necesita tener datos del número de microorganismos en todas las fases de la misma.
Por estos motivos, Baranyi et al.desarrollaron en 1993 un nuevo modelo matemático
que describía la fase de latencia como una fase de adaptación de las células al nuevo
ambiente, independiente del posterior desarrollo de la curva de crecimiento.
Ec. 1.2
donde es el logaritmo del número de microorganismos a tiempo t, el
logaritmo del número inicial de microorganismos del cultivo, m es un parámetro de
curvatura que caracteriza la transición de la fase de latencia a la de crecimiento
exponencial e es el logaritmo de la concentración celular máxima alcanzada.
describe el retraso gradual en el tiempo de transición entre la fase de latencia y la fase
de crecimiento exponencial (ecuación 1.3).
) Ec. 1.3
donde(v) es otro parámetro de curvatura que caracteriza la transición de la fase de
crecimiento exponencial a la fase de crecimiento estacionario y es un parámetro que
caracteriza el estado fisiológico de las células.
Este modelo permite separar la duración de la fase de latencia del posterior
crecimiento exponencial, y permite también construir la curva de crecimiento cuando no
se dispone de datos en la fase estacionaria.
y(t) = yo + max A (t) - –– ln (1 + –––––––––––––– ) em max A(t) – 1
em (ymax – yo)
1
m
21
El modelo, aunque complejo, dispone de un software gratuito que facilita su uso, el
DMFit. DMFit no es un programa en sí, si no que se instala como un complemento de
Microsoft Excel.
1.3. LOS TRATAMIENTOS TÉRMICOS EN LA CONSERVACIÓN DE
ALIMENTOS.
Tradicionalmente, la técnica de conservación por calor de los alimentos, ha sido la
más extendida en las industrias alimentarias. Bien para inactivar células vegetativas en
los procesos de pasteurización, o para inactivar tanto células vegetativas como esporos
en los procesos de esterilización.
El tratamiento térmico óptimo que se debe aplicar a un alimento depende de diversos
factores, como son: la termorresistencia de los microorganismos presentes en el
alimento, la carga microbiana inicial que contenga el alimento antes de su procesado, el
pH del alimento, su estado físico y las cinéticas de inactivación de los distintos factores
de calidad (color, vitaminas,etc).
Como tratamientos térmicos se entienden todos los procesos que tienen como fin la
destrucción de los microorganismos alterantes o patógenos, presentes en los alimentos y
que podrían desarrollarse durante la vida útil de los mismos. Dentro de estos
tratamientos térmicos hay que destacar la pasteurización y la esterilización.
1.3.1. Pasteurización.
Según Fellows, (1994), es el método de conservación de los alimentos por
inactivación de sus enzimas y destrucción de los microorganismos relativamente
termosensibles (bacterias no esporuladas, levaduras y hongos filamentosos), que
provoca cambios mínimos en el valor nutritivo y en las características organolépticas
del alimento
La intensidad del tratamiento térmico y el grado de prolongación de su vida útil se
hallan determinados principalmente por el pH del alimento.
22
1.3.2. Esterilización.
El fin de este proceso es la destrucción, mediante la aplicación de calor a
temperaturas superiores a 100ºC, de todos los organismos viables, y sus esporos, que
puedan ser contados por una técnica de recuento o cultivo adecuados.
Aunque el principal objetivo de la esterilización de alimentos es la destrucción de los
microorganismos, en paralelo, ocurren otra serie de procesos. Algunos son deseables
como la destrucción enzimática o el ablandamiento de los tejidos, aunque cuyos efectos
también deben de ser controlados, para que no lleguen a afectar a sus propiedades
físicas: color, forma, consistencia, etc. Otros efectos son menos deseables, pero
inevitables en parte, como cambios sustanciales en su valor nutritivo y características
organolépticas. Por tanto la optimización de estos procesos tecnológicos se debe centrar
en reducir los tiempos y /o las temperaturas de tratamiento para poder minimizar estos
efectos no deseables que originan un detrimento en el valor nutritivo y en las
características sensoriales del producto, pero manteniendo siempre la seguridad desde
un punto de vista microbiológico.
1.4. CINÉTICA DE DESTRUCCIÓN MICROBIANA POR CALOR.
En la década de 1920, Bigelow, Esty y Meyer, en los laboratorios de la National
Canners Association, estudiaron en profundidad los mecanismos de acción del calor
sobre los microorganismos y la cinética de destrucción microbiana, sentando así las
bases de los actuales procesos de esterilización. Pero, en los últimos años, han sido
varias las industrias que han encontrado bacterias cuyos esporos son capaces de
sobrevivir a estos procesos clásicos de esterilización Por esta razón, una de la metas
principales de la conservación de los alimentos, es conocer la cinética de inactivación
por calor de estos esporos bacterianos, y desarrollar modelos matemáticos que permitan
predecir su cinética de inactivación por calor, para poder optimizar dichos procesos,
evitando también el sobreprocesado de los alimentos, que conllevaría a un detrimento
importante de características organolépticas y nutricionales de los mismos así como una
un coste energético excesivo del proceso. Actualmente, este sobreprocesado es la
tendencia seguida por gran parte de las industrias alimentarias.
23
La cinética de inactivación por calor para cada microorganismo y cada condición, se
pensaba que se podía definir en base a los valores D y z, que son en los que,
tradicionalmente, se ha basado la industria alimentaria, para el desarrollo de sus
tratamientos térmicos.
1.4.1. Inactivación de microorganismos en condiciones isotérmicas.
Son muchos los autores, que durante años, han asumido que la mortalidad de los
microorganismos expuestos al calor a temperatura constante sigue una cinética de
primer orden (Jay, 1996; Holdsworth, 1997; Texeira y Rodriguez, 2003). Según esta
teoría, si una población bacteriana es sometida a la acción del calor a una temperatura
constante, la tasa de supervivientes es una función exponencial del tiempo de
tratamiento (ecuación 1.4):
kt
t eNN 0 Ec. 1.4
donde Nt es el número de microorganismos supervivientes tras t minutos de
tratamiento, N0 el número inicial de microorganismos, k la constante de inactivación y t
el tiempo de tratamiento a una temperatura constante.
Si representamos el logaritmo de microorganismos supervivientes frente al tiempo de
tratamiento, a una temperatura constante, se obtiene la gráfica de supervivencia (figura
1.3).
Figura 1.3. Gráfica de supervivencia.
24
Son numerosos los investigadores que han intentado explicar el orden logarítmico de
la gráfica de supervivencia. Una de las teorías más aceptadas fue la de Rahn (1929,
1945a y b), que establecía como base de esta pérdida de la capacidad reproductiva la
desnaturalización de un gen esencial en la reproducción. Ya que, si se daña un gen u
otra estructura esencial para la reproducción, se perdería la capacidad reproductiva, lo
que no ocurriría si se daña cualquier otro tipo de molécula. Marquis et al., (1994),
sugirieron el daño en las proteínas y enzimas como la causa de la inactivación de los
esporos y, de hecho, Palop et al., (1998) observaron que la destrucción de los esporos de
B. megaterium por calor, y también por hidroperóxidos coincidía con la inactivación de
determinados enzimas citoplasmáticos. A pesar de todas estas investigaciones, el
mecanismo exacto de inactivación térmica, así como los componentes dañados durante
el procesado térmico están aún por determinar (Tabis y Buys, 2010).
Muchos autores, en lugar de utilizar la constante de inactivación k, utilizan el tiempo
de reducción decimal DT, que se define como el tiempo de tratamiento necesario para
reducir una población bacteriana a la décima parte, a una temperatura dada, (Katzin et
al., 1943). El valor DT, representado en la figura 1.3 por la inversa negativa de la
pendiente de la curva de supervivencia, es el tiempo necesario para que la recta
atraviese un ciclo logarítmico.
El valor DT es el parámetro empleado para poder comparar la termorresistencia de las
distintas bacterias, bien a la misma temperatura para bacterias de la misma o de distinta
especie, o bien, a distintas temperaturas para una misma cepa. Este parámetro, nos
permite también evaluar el efecto del entorno (concentración y composición del
substrato, pH, temperatura de incubación, sistema de calentamiento, etc) sobre la
resistencia térmica aparente de cada bacteria.
La relación entre los valores DT y k es la que se muestra en la siguiente ecuación (ec.
1.5):
kDT
10ln
Ec. 1.5
25
1.4.1.1. Curvas de supervivencia no logarítmicas.
Aunque desde hace muchos años, ha sido un gran número de autores (Licciardello y
Nikerson; 1963; Alderton et al., 1964; Yokoya y York; 1965; Han et al., 1971; Stumbo,
1973; Han,1975; Han et al., 1976; Pflug y Smith, 1977; Bean et al., 1979a; King et al.,
1979; Komemushi, 1983; Peleg et al., 1998; Mafart et al., 2002; Geeraerd et al., 2005,
entre otros), los que han descrito numerosos curvas de destrucción en las que los
microorganismos no siguen el cásico comportamiento lineal. Hoy en día, en el diseño de
las operaciones de esterilización de muchas empresas de alimentación, todavía se sigue
asumiendo el carácter logarítmico de las curvas de destrucción bacteriana, debido
quizás, a la sencillez de la expresión matemática. Ya que esta expresión se complica
enormemente al considerar el carácter no logarítmico de la misma.
Las curvas de supervivencia no lineales presentan diferentes formas (figura 1.4). En
la mayoría de los casos, estas curvas no lineales presentan una concavidad negativa,
conocida como hombro y/o una concavidad positiva denominada cola. (figura1.4.a.).
Figura 1.4. Distintas formas que pueden presentar las curvas de supervivencia a
temperatura constante, a) Tipo I: De orden logarítmico, Tipo II: Hombro, y Tipo III:
Cola; b) Hombro y cola.
I II
III
b) a)
26
En muchos casos, el logaritmo de los supervivientes con respecto al tiempo aparece
como una línea recta o aproximadamente recta durante al menos las 4-5 primeras
reducciones decimales. Esta situación corresponde con la curva tipo 1 de la figura 1.6.
Por tanto, se ha concluido que, en estos casos, la inactivación microbiana es un proceso
que sigue una cinética de primer orden (Stumbo, 1973, Texeira, 1992; Jay, 1996;
Holdsworth, 1997; Toledo, 1999).
En el resto de los casos, en los que la relación del logaritmo del número de
supervivientes con respecto al tiempo es claramente no lineal, como se muestra en las
curvas Tipo II y Tipo III de la figura 1.4 a) y en la figura 1.4. b), diversos autores
(Stumbo, 1973; Le Jean et al., 1994) han sugerido que la población es una mezcla de
subpoblaciones con diferente sensibilidad al calor, o bien, han aceptado la teoría de que
la cinética de inactivación no sigue una cinética de primer orden, y han propuesto
diferentes modelos matemáticos que permiten predecir dichas cinéticas no lineales
(Shull et al., 1963; Cole et al., 1993; Hills y Mackey, 1995; Linton et al., 1995; Peleg y
Cole, 1998).
1.4.1.2. Modelización de la curva de supervivencia.
Dada la frecuencia con la que los microorganismos mostraban en sus curvas de
supervivencia todas estas desviaciones de la linealidad, han sido muchos los autores que
desde hace muchos años han desarrollado diversos modelos matemáticos con el fin de
poder interpretar estas curvas no lineales. Muchos de estos eran modelos deterministas
(Shull et al., 1963; Rodriguez et al., 1988; Kilsby et al., 2000), y otros eran puramente
empíricos (Baranyi et al., 1996; Buchanan et al., 1997; Geeraerd et al., 2000). Estos
modelos mostraron una buena bondad del ajuste, pero eran poco robustos y sólo se
podían utilizar en situaciones muy concretas. Además, los parámetros de los modelos
determinísticos pueden ser difíciles de estimar, mientras que los parámetros de los
modelos empíricos, por lo general, no tienen un claro significado físico o biológico.
Todos estos modelos, presentan de 3 a 4 parámetros, razón por los que las empresas
evitan utilizarlos en los cálculos matemáticos de sus tratamientos térmicos.
27
1.4.1.2.1. El modelo de Weibull.
Los modelos deterministas asumen la cinética logarítmica de destrucción por el calor
y, a partir de ella, plantean distintas hipótesis para tratar de explicar las desviaciones de
la linealidad. Otro grupo de teorías explica estos comportamientos en base a un
planteamiento netamente diferente. Asume la existencia en la población, de una
distribución de frecuencias, en cuanto a su resistencia al calor se refiere, del
comportamiento de los microorganismos que están siendo sometidos al tratamiento
térmico, y la forma de la gráfica de supervivencia, la consecuencia de dicha
distribución. De entre todos los modelos probabilísticos utilizados, posiblemente el más
empleado es el que se basa en la distribución de Weibull.
La distribución de Weibull surgió para describir el comportamiento de sistemas o
hechos que tienen cierto grado de variabilidad. Fue Weibull, en 1939, quien desarrolló
una función de distribución para analizar estadísticamente la resistencia de distintos
materiales (Cunha et al., 1998). Un modelo simple, derivado de la distribución de
Weibull, basado en la función acumulativa de esta distribución, es capaz de describir
cinéticas de destrucción no logarítmicas en microorganismos.
Fueron Peleg y Cole, 1998, los que introdujeron la función de Weibull en el campo
de la Tecnología de Alimentos. Según estos y posteriormente otros autores (Fernandez
et al., 1999; Peleg, 1999), a una temperatura dada, el tiempo de exposición necesario
para producir la muerte de una bacteria o de un esporo varía de unos individuos a otros.,
y esta dispersión de la resistencia térmica de cada individuo es la que sigue la función
de distribución de Weibull. Si se consideran las gráficas de supervivencia como gráficas
acumulativas de una distribución temporal de sucesos letales, cada microorganismo
muere o es inactivado a un tiempo específico, de tal forma que la gráfica de
supervivencia es un reflejo de la distribución de resistencias de las células, y la forma
que ésta tenga dependerá de la características de la distribución de resistencias dentro de
la población microbiana.
La función de densidad de probabilidades que describe la distribución de Weibull
viene definida por la ecuación 1.6.
28
ptp
etp
tf
1
)(
Ec. 1.6
donde es el parámetro de escala y p es el parámetro de forma.
A partir de ésta, la función acumulativa de esta distribución es la que describe en la
ecuación 1.7, propuesta por Mafart et al., 2002:
pt
LogNLogN
0
Ec. 1.7
donde N es el número de microorganismos tras t minutos de tratamiento y N0 es el
número de microorganismos a tiempo 0.
La ventaja del modelo de Weibull frente a otros modelos no lineales es su
extraordinario parecido con el modelo que define la cinética de destrucción de primer
orden, lo que facilita enormemente su uso.
El parámetro de escala está relacionado con la intensidad del tratamiento y representa
el tiempo necesario para inactivar el primer ciclo logarítmico de la población
microbiana. El parámetro de forma describe el comportamiento de la población, de tal
forma que si p>1 la gráfica es cóncava (fenómeno de hombro), si p<1 la gráfica es
convexa (fenómeno de cola) y si p=1 la gráfica de supervivencia sería lineal (figura
1.5).
Figura 1.5. Gráficas de la distribución de Weibull. (a) Gráfica de densidad de
probabilidad. (b) Gráficas de supervivencia de Weibull.
29
Se han propuesto diferentes formas de la función acumulativa del modelo de Weibull
para describir las curvas de supervivencia no lineales, entre las que destacan las
desarrolladas por Peleg y Cole (1998), van Boekel (2002) y Mafart et al., (2002).
Esta función de distribución de frecuencias ha permitido modelizar cinéticas de
inactivación bifásicas con presencia de colas, ampliamente descritas en la aplicación de
antimicrobianos naturales o nuevas tecnologías para la conservación de alimentos
(Fernández et al., 2002). También se ha aplicado con éxito para describir la inactivación
de esporos de B. subtilis mediante altas presiones y la inactivación de varias especies de
Bacillus y Clostridium mediante calor (Peleg y Cole, 1998; Fernández et al., 1999a) o
de células vegetativas por pulsos eléctricos (Gómez, 2006).
1.4.1.2.2. El modelo de Geeraerd.
Geeraerd et al. (2000), intentando eliminar las limitaciones presentes en la mayoría de
los modelos propuestos hasta ese momento, desarrollaron un modelo propio, para
describir las cinéticas no lineales (ecuación 1.8). Este modelo está basado en el
concepto del valor D de la clásica cinética logarítmica, y permite describir gráficas de
supervivencia no lineales de formas bien distintas, incluyendo tanto la presencia de
hombro como de colas.
Ec. 1.8
donde N es el número de microorganismos a tiempo t, N0 el número inicial de
microorganismos, Nres es el número residual de microorganismos (cola), kmax la
constante de inactivación y Sl el tiempo de duración del hombro.
Estos mismos autores han desarrollado un software, GInaFIT, que permite ajustar las
curvas de supervivencia tanto con su modelo, como con modelos matemáticos de otros
autores que están siendo utilizados en la actualidad (Geeraerd et al., 2005).
30
1.4.2. Efecto de la temperatura de tratamiento en la inactivación de
microorganismos.
Se ha comprobado en numerosas ocasiones que los valores DT también siguen un
comportamiento logarítmico con respecto a la temperatura de tratamiento. Al
representar el logaritmo de los valores DT frente a las correspondientes temperaturas de
tratamiento se obtiene una nueva gráfica, que se denomina de termodestrucción (figura
1.6). Basándose en esta gráfica se puede definir el valor z, como el número de grados
que hay que aumentar la temperatura de tratamiento para que el DT se reduzca en un
ciclo logarítmico, es decir, cuando se eleva la temperatura de tratamiento en z grados, el
tiempo requerido para conseguir la misma destrucción térmica es 10 veces menor. Se
calcula como la inversa negativa de la pendiente de la curva de destrucción térmica
(figura 1.6).
Figura 1.6. Gráfica de destrucción térmica (TDT) de un microorganismo.
A partir de la gráfica de destrucción térmica se puede calcular el valor D a cualquier
temperatura, mediante la ecuación 1.9.
Ec. 1.9
Temperatura
z
Log DT
50
0.1
60
1
z
TT
T
ref
refDTD
10)(
31
donde DT (min) es el valor D a la temperatura T (ºC), DTref (min) el valor D a la
temperatura Tref (ºC) y z (ºC) representa el valor z del microorganismo.
En el caso del modelo de Weibull, la dependencia de los valores delta con la
temperatura, también puede ser descrita con el modelo clásico de Bigelow, al igual que
los valores D convencionales, tal y como se expresa en la ecuación 1.10 (Mafart et al.,
2002):
Ec. 1.10
donde z (ºC) representa el valor z del microorganismo, δT (min) es el tiempo para la
primera reducción decimal a la temperatura T (ºC). y δref (min) el tiempo para la primera
reducción decimal a la temperatura de referencia Tref (ºC).
Para describir la dependencia de la constante de inactivación con respecto a la
temperatura, el modelo de Geeraerd se basa en la ecuación 1.11, derivada igualmente
del modelo de Bigelow.
Ec. 1.11
donde AsymD(T) y AsymD(Tref) son los tiempos de reducción decimal a la
temperatura T y a la temperatura de referencia (Tref) , respectivamente.
1.4.3. Inactivación de microorganismos en condiciones no isotérmicas.
Tradicionalmente, para predecir las curvas de supervivencia en condiciones no
isotérmicas se ha asumido que los microorganismos siguen una cinética de destrucción
de primer orden, empleándose el concepto de letalidad (L), que puede ser definido como
el equivalente de un minuto a una temperatura T en minutos a una temperatura de
referencia (Tref), y que vendría definido por el cociente de los valores D (a las
temperaturas Tref y T), según viene expresado en la ecuación 1.12.
LT = Dref / DT = 10((Tref – T) //z) Ec. 1.12
32
El concepto de letalidad conlleva el cálculo del equivalente letal de cada instante del
tratamiento no isotérmico, para así convertirlo en un tratamiento isotérmico de letalidad
equivalente a la del tratamiento no isotérmico completo. Esta consideración puede llevar
a errores, que serán de mayor magnitud cuanto mayores sean los intervalos de tiempo
establecidos y también ante la presencia de desviaciones de la linealidad. Por este
motivo, en los últimos años, se tiende más al empleo de modelos dinámicos, tanto
lineales como no lineales, que permiten calcular la inactivación microbiana que se
produce a cada una de las temperaturas del tratamiento no isotérmico en los
diferenciales de tiempo que el medio de tratamiento permanece a esas temperaturas, sin
necesidad de integrar la letalidad de ese tratamiento a una temperatura constante.
1.4.3.1. Modelo de Weibull
El modelo de Weibull, para predecir el número de supervivientes en condiciones no
isotérmicas, se basa en la dependencia de δ con respecto a la temperatura (ecuación
1.10), ya que para cada intervalo, el valor de δ depende también de la temperatura. La
tasa de inactivación logarítmica isotérmica dependiente del tiempo puede ser descrita
como una ecuación diferencial (ecuación 1.13) (van Zuijlen et al., 2010):
Ec. 1.13
1.4.3.2. Modelo de Geeraerd
El modelo de Geeraerd también se puede emplear como modelo dinámico, para
predecir el número de supervivientes en condiciones no isotérmicas..En ese caso, las
ecuaciones que lo definen son las ecuaciones diferenciales 1.14 y 1.15, mientras que la
dependencia de Kmax con la temperatura ya ha sido definida en la ecuación 1.11.
Ec. 1.14
33
Ec. 1.15
donde representa la densidad de microorganismos (cfu/mL), el estado
fisiológico de la célula (-), la tasa específica de inactivación (1/min) y es la
densidad de población residual (ufc/mL).
1.5. DAÑO SUBLETAL
Los microorganismos que sobreviven a la acción letal de los agentes conservantes
pueden haber sido dañados de manera subletal, por lo que son capaces de crecer
solamente si las condiciones ambientales son las adecuadas (Mackey, 2000). El análisis
del daño subletal presenta dos grandes inconvenientes. Por un lado, las células dañadas
pueden crecer o no cuando se utilizan medios selectivos para el cultivo de los
microorganismos, lo que conlleva a una sobreestimación de la letalidad de los
tratamientos. Además, el daño subletal produce un aumento en la fase de latencia de los
microorganismos, por lo que se deben aumentar los tiempos de incubación de los
cultivos tras el tratamiento. Sin embargo, si estos microorganismos pierden la capacidad
de recuperación debido a la combinación de las distintas técnicas de conservación
(barreras), se ve afectada su homeostasis, y la célula no será capaz de crecer , la tasa de
inactivación obtenida será superior (Mackey, 2000). Por esto, la caracterización del
daño subletal producido por las tecnologías emergentes de conservación es uno de los
principales objetivos de numerosas investigaciones, para poder así optimizar la
combinación de tratamientos técnicos subletales y conseguir así un mayor efecto letal
sobre los microorganismos.
1.6. MECANISMOS DE ADAPTACIÓN Y RESISTENCIA.
Son muchos los autores que han demostrado que los microorganismos pueden
desarrollar mecanismos de respuesta y de resistencia cuando son expuestos a daños
34
subletales, lo que puede afectar seriamente a la seguridad de alimentos (Abee y
Wouters, 1999). En los últimos años, muchas son las teorías que han tratado de
dilucidar los mecanismos de adaptación al estrés de las bacterias y el mecanismo de
regulación por parte de los genes. El mecanismo regulador más importante (Mañas y
Pagán, 2005) parece ser la activación del factor sigma (). Una vez activado, este factor
se une a las RNA polimerasas, formando un promotor específico. El factor S (figura
1.8) es el que regula la transcripción de más de 50 genes implicados en la resistencia al
calor y al estrés ácido y oxidativo entre otros en bacterias Gram-negativas (Huisman et
al., 1996). La inducción de este factos sigma se produce como respuesta al agotamiento
de nutrientes, generalmente cuando las células entran en la fase estacionaria de
crecimiento y también cuando las células que se encuentran en fase exponencial sufren
algún tipo de estrés, incluido el agotamiento de los nutrientes del medio (Dodd y
Aldsworth, 2002). En el caso de las bacterias Gram-positivas (B. subtilis, L.
monocytogenes y Staphylococcus. aureus) se ha descrito un factor sigma equivalente a
este, el factor B (Abee y Wouters, 1999; Hill et al., 2002). Además, parece ser que
ambos factores sigma presentan mecanismos de acción paralelos en cuanto al desarrollo
de los mecanismos de resistencia al estrés de las bacterias Gram-positivas y Gram-
negativas se refiere. No se sabe exactamente cómo estos factores desarrollan los
distintos mecanismos de resistencia. Sin embargo, se sabe que el factor 32, codificado
por el gen rpoH, controla la respuesta a los choques térmicos mediante un rápida y
temporal sobreexpresión de chaperones y proteasas.
Figura 1.8. Esquema de la respuesta de los microorganismos al estrés (fuente:
California Institute of Technology).
35
Son muchos los casos (Palhano et al., 2004; Buchanan et al., 2004) en los que se han
observado la aparición de resistencias cruzadas por la aplicación de distintas técnicas de
conservación, por lo que la adaptación de los microorganismos a las condiciones
ambientales adversas durante el procesado es un riesgo que siempre debe ser
considerado Sin embargo, la aplicación de un choque térmico en presencia de
compuestos antimicrobianos o no, no protege a las bacterias de la acción de estos
compuestos. Esto indica que los cambios originados por este choque térmico en las
envolturas celulares no son relevantes en la resistencia a estos compuestos.
1.7. LOS ANTIMICROBIANOS NATURALES COMO MÉTODO
ALTERNATIVO PARA LA CONSERVACIÓN DE ALIMENTOS.
De entre todos los métodos de conservación propuestos como alternativa a los
tratamientos térmicos, los antimicrobianos naturales han atraído mucho interés y han
sido objeto de numerosas investigaciones, ya que a pesar de que su dosis máxima está
limitada para muchos de ellos por poder conferir olores y sabores desagradables a los
alimentos, son totalmente seguros para la salud.
La Organización de la Naciones Unidas para la Alimentación y la Agricultura (FAO)
y la Organización Mundial de la Salud (WHO) son los encargados de realizar, entre
otras muchas funciones, los análisis de los nuevos compuestos, comprobando la
seguridad de los mismos y sus dosis de ingesta máxima (MDI) en los que se basa el
organismo competente en materia de legislación de cada país para aprobar y regular el
uso de los antimicrobianos químicos en los alimentos. Para evitar este proceso, las
empresas alimentarias han buscado conservantes emergentes en compuestos que ya se
utilizaban en los alimentos, posiblemente con otros propósitos, pero que son
compuestos potencialmente antimicrobianos, la mayoría presentes en plantas y
utilizados como ingredientes saborizantes. Estos compuestos ya están aprobados y no
son tóxicos en los niveles utilizados, y la mayoría de los cuales están clasificados como
GRAS.
Los compuestos antimicrobianos naturales se encuentran ampliamente distribuidos
en el medio ambiente, los podemos encontrar en plantas, animales, o bien, ser
36
producidos por distintos microorganismos, varios de los cuales ya están siendo
utilizados como conservantes de alimentos.
Diversos estudios reflejan la distinta sensibilidad de los microorganismos a estos
compuestos según su naturaleza, y también según el medio de laboratorio o alimento en
el que se aplique el tratamiento (Twari et al., 2009).
1.7.1. Nisina.
Es una bacteriocina, producida por Lactococcus (Streptococcus) lactis. Es un
compuesto de naturaleza proteica que presenta actividad antimicrobiana principalmente
frente a células vegetativas y esporas de bacterias Gran positivas. Pero, en ausencia de
otros métodos de conservación no inhibe el crecimiento de bacterias Gram negativas,
levaduras ni hongos.
Como conservante de alimentos, es un compuesto que presenta unas propiedades
muy atractivas, ya que no confiere colores ni olores desagradables a los alimentos y no
presenta toxicidad para el ser humano, incluso se ha comprobado que no desarrolla
resistencia cruzadas a antibióticos. Además, es estable al calor y al almacenamiento
durante largos periodos de tiempo.
1.7.1.1. Mecanismo de acción.
En general, la nisina presenta una elevada actividad antimicrobiana frente a un
amplio espectro de bacterias Gram-positivas y frente a esporos bacterianos. En
circunstancias normales, no inhibe de forma significativa a mohos, levaduras y bacterias
Gram-negativas. Las bacterias Gram-negativas son resistentes a la nisina porque ésta no
es capaz de penetrar su compleja pared y alcanzar su sitio diana, que es la membrana
citoplasmática (Lück y Jager, 1995; Philips, 1999; Davidson, 2000).
En el caso de las células vegetativas, la primera estructura afectada por la nisina es la
membrana plasmática. La nisina forma poros en la membrana, por los que disipan la
fuerza motriz de protones. Esto inhibe la entrada de aminoácidos, y producen una
rápida salida al exterior de pequeños metabolitos, iones y otros solutos citoplasmáticos,
37
como aminoácidos, nucleótidos y ATP (Abbe, 1995; Barbosa-Cánovas et al., 1998
Crandall y Montville, 1998).
La membrana externa de las bacterias Gram-negativas evita que la nisina pueda
interactuar con la membrana plasmática de las células. Pero, cualquier tratamiento como
un tratamiento térmico subletal, altas presiones hidrostáticas o la congelación, pueden
provocar alteraciones en la membrana externa que hagan que las bacterias Gran-
negativas sean sensibles a la nisina (Hill et al., 2006; Tiwari et al., 2009).
Las bacterias formadoras de esporas, en general, son más sensibles a la nisina que el
resto de las bacterias Gram positivas, sobre todo las especias pertenecientes a los
géneros Bacillus y Clostridium y esta sensibilidad parece aumentar en condiciones
ácidas y en esporos dañadas térmicamente (Jack et al., 1995). En la mayoría de los
estudios realizados, la nisina parece tener un efecto esporostático, aunque también se
han visto efectos esporicidas dependiendo de la cepa estudiada y de los daños
ocasionados por el tratamiento térmico (de Vuyust y Vandame, 1994; Thomas y Delves-
Brughton, 2005). El mecanismo de acción de la nisina no inactiva esporas ni inhibe su
germinación, sino que actúa en la postgerminación, inhibiendo crecimiento de la espora
(Komitopoulou et al., 1999; Meghrous et al., 1999; Prittjarvi, et al., 2001).
1.7.1.2. Aplicaciones.
La nisina es efectiva como conservante de alimentos contra microorganismos
patógenos como Listeria monocytogenes (Nassar et al., 1995; Mahadeo et al., 1994).
Otro uso muy importante se centra en bacterias Gram-positivas formadoras de
endosporas, incluyendo al género Bacillus y Clostridium, lo que la convierte en un
conservante idóneo para productos pasteurizados o tratados térmicamente pero que no
están estériles. Estos tratamientos eliminan las células vegetativas de los productos, pero
no las bacterias esporuladas, que sobreviven a ellos y pueden, posteriormente, germinar
y multiplicarse durante el almacenamiento de estos productos, incluso en refrigeración,
alterando sus características organolépticas y convertirlos en productos no aptos para el
consumo. Thomas y Delves-Broughton, 2001 comprobaron que el crecimiento de un
cultivo de 104 ufc/mL de Bacillus sporothermodurans al que se le adicionaban 0,125 µg
de de nisina/mL, aumentaba su fase de latencia en 7 días a 37ºC. Otro grupo de
38
bacterias sensibles a la nisina son las bacterias ácido lácticas, microorganismos
alterantes de productos ácidos, como ensaladas aliñadas, salsas o bebidas alcohólicas
como vino y cerveza, que son productos que no suelen ser tratados térmicamente.
El uso de la nisina como conservante de alimentos ha sido probado en todo tipo de
productos: tanto líquidos como sólidos, enlatados, almacenados a temperatura ambiente
o en refrigeración (Delves- Broughton y Gasson, 1994; Thomas et al., 2000; Thomas y
Delves- Broughton, 2001), principalmente en alimentos procesados térmicamente para
evitar la germinación de las esporas durante el almacenamiento y la consecuente
alteración de los mismos. Además, permite disminuir los efectos negativos del
tratamiento térmico al poder reducir la intensidad de los mismos, reduciendo al mismo
tiempo el coste económico de los procesos.
La nisina (E-234) es la única bacteriocina reconocida como GRAS (Generally
Recognized As Safe. Su uso como conservante alimentario está autorizado en la unión
Europea por la Directiva 95/2/ (CE) sobre aditivos alimentarios diferentes a los
colorantes y los edulcorantes, modificada por la Directiva 98/72/CE. Este compuesto es
utilizado mayoritariamente en la industria quesera para controlar el crecimiento de
Clostridium spp. y en otros alimentos cremosos.
Tabla 1.1. Concentración de nisina aceptada por la Directiva 98/72/CE.
Postres de semolina tapioca y productos similares 3 mg/kg
Queso madurado y queso fundido 12,5 mg/kg
Clotted cream 10 mg/kg
Queso mascarpone 10 mg/kg
Ciertos compuestos, han mostrado un efecto sinérgico cuando se han usado de
combinados con la nisina. Entre estos, se pueden destacar aceites esenciales como el
timol y el carvacrol, ácidos orgánicos, bacteriocinas, extractos de ajo, y lisozima entre
otros (Pol y Smid, 1999; Pol 2001; Singh et al, 2001; Mansour and Millieri, 2001).
Otras estudios in situ (Schillinger, 1999), incluso han demostrado la producción de
bacteriocinas que pueden potenciar el efecto de la nisina. En Listeria monocytogenes y
39
Bacillus ha sido probado este efecto sinérgico de nisina, carvacrol y citrato en paté de
hígado (ter Steeg, 1993; ter Steeg et al., 1994).
1.7.2. Aceites esenciales.
Muchas plantas, especias y hierbas aromáticas, así como sus aceites esenciales,
contienen un elevado número de compuestos que se sabe que son letales para bacterias,
mohos y levaduras, o bien que inhiben, distintas actividades metabólicas, como la
producción de micotoxinas y toxinas bacterianas (Beuchat, 1994; Davidson, 2001 Ultee
y Smid, 2001).
Los compuestos antimicrobianos de las plantas se encuentran presentes normalmente
en la fracción de los aceites esenciales de las hojas (romero y tomillo), flores (clavo),
bulbos (ajo y cebolla), frutos (pimienta y cardamomo) y otras partes de las plantas
(Nychas, 1995; Shelef, 1983). Estos compuestos antimicrobianos suelen ser terpenos,
alcoholes alifáticos, aldehídos, cetonas, ácidos e isoflavonoides.
La compleja composición de los aceites esenciales puede variar en función de las
condiciones de crecimiento de cultivo de la planta, del modo de extracción del mismo, y
de otros factores que hacen que éstos tengan diferente grado de actividad antibacteriana
(Dorman y Deans, 2000).
Generalmente, los aceites esenciales que poseen elevada actividad antibacteriana
frente a patógenos resistentes contienen un alto porcentaje de compuestos fenólicos
como carvacrol, eugenol y timol (Farag et al., 1989).
En esta Tesis Doctoral, para evitar fluctuaciones debido a esta variabilidad se
utilizaron productos comerciales puros, asegurándose así una concentración fija del
compuesto a utilizar.
1.7.2.1. Carvacrol.
El carvacrol (figura 1.9 a) es un fenol monoterpenoide presente en la fracción
esencial de distintas plantas, como el orégano (Origanum vulgare) en un 60-70% y el
tomillo (Thymus spp.) en un 45% (Ultee et al., 2002).
40
El estudio de la actividad antibacteriana del aceite esencial de tomillo y, del
carvacrol como su componente mayoritario, presenta distintos niveles de inhibición del
crecimiento cuando se utilizó frente a especies Gram-positivas y Gram-negativas
(Dorman y Deans, 2000).
Otros autores han estudiado la actividad antimicrobiana de este compuesto frente a
distintas bacterias. Du et al., (2008), comprobaron la efectividad de este compuesto
frente al crecimiento de E.coli en films de manzana comestible. Ultee y Smid, (2001)
viernon como afectaba este compuesto al crecimiento y a la producción de toxina de
Bacillus cereus.
1.7.2.2. Timol.
Es un compuesto fenólico (figura 1.9 b), incoloro, de olor y sabor agradable, que se
encuentra presente en la naturaleza en los aceites esenciales del tomillo y del orégano, al
igual que su isómero carvacrol. Es, junto con el carvacrol uno de los terpenos
mayoritarios presente en la fracción del aceite esencial del tomillo en un porcentaje de
un 43% y del orégano, en un porcentaje hasta en un 50%.
Figura 1.9. Fórmula química del carvacrol a) y del timol b).
1.7.2.3. Mecanismo de acción
Pese a que son muchos los estudios realizados sobre la actividad de los aceites
esenciales y sus componentes, su mecanismo de acción no ha sido estudiado en detalle
(Lambert et al., 2001).
a) b)
41
La mayoría de los estudios sobre la acción de los aceites esenciales frente a
microorganismos patógenos coinciden en que son más activos frente a Gram- positivos
que frente a Gram- negativos (Shelef, 1983; Farag et al., 1989; Outtara et al., 1997;
Smith- Palmer et al., 1998; Delaquis et al., 2002; Harpaz et al., 2003). Este hecho se
debe a que la membrana externa de las bacterias Gram- negativas disminuye la difusión
de compuestos hidrofóbicos a su través (Vaara, 1992). Sin embargo, no todos los
estudios coinciden (Wilkinson et al., 2003). Lambert et al., 2001, comprobaron que los
aceites esenciales son capaces de entrar en el periplasma de las bacterias Gram-
negativas a través de las proteínas de membrana externa. De hecho, Aeromonas
hydrophyla, parece ser una de las especies más sensibles a la acción de los aceites
esenciales (Deans y Ritchie, 1987; Stecchini et al., 1993; Wan et al., 1998).
Todos los estudios apuntan a que la principal acción principal de estos aceites
esenciales la llevan a cabo los compuestos fenólicos.
Su actividad antimicrobiana parece que no se debe a un sólo mecanismo de acción,
sino a la acción multifactorial que los distintos componentes de los aceites esenciales
tienen sobre la célula: alteración de la membrana plasmática y de las proteínas,
degradación de la pared celular, filtración del contenido celular, afectando a la
concentración del citoplasma y produciendo la disminución de la fuerza motriz,
(Skandamis y Nychas, 2001; Skandamis et al., 2001; Carson et al., 2002; Holley y
Patel, 2005).
Una de las características más importantes de los aceites esenciales es su naturaleza
hidrófoba, que les confiere la capacidad de penetrar a través de las membranas
celulares, alterando su estructura y haciéndolas más permeables (Carson et al., 2002).
La célula, debido a este aumento de permeabilidad, sufre una salida moderada de iones
y otros compuestos celulares, que puede tolerar, cuando es moderada, sin perder su
viabilidad. Sin embargo, cuando esta pérdida es excesiva puede llevar a la muerte
celular (Ultee et al., 2000).
También parece evidente la interacción de los componentes de los aceites esenciales
con las proteínas integrales de membrana (Knobloch et al., 1989; Pol et al., 2001). Las
moléculas hidrocarbonadas presentes en los aceites esenciales pueden acumularse en la
bicapa lipídica y destruir la interacción lipoproteica (Juven et al., 1994; Sikkema et al.,
1995), provocando modificaciones de la estructura celular y como consecuencia
42
alteraciones de la funcionalidad celular. Según Burt (2004), los componentes de los
aceites esenciales podrían interaccionan con las ATPasas presentes en la membrana
citoplasmática, por lo que se vería afectada la síntesis de energía y de componentes
estructurales.
Gill et al. (2006), llevaron a cabo un estudio con eugenol, carvacrol y cinamaldehído
y demostraron su efecto inhibitorio sobre la ATPasa de membrana de Escherichia coli y
Listeria monocytogenes.
Los mecanismos de acción del carvacrol y del timol son muy similares al de otros
compuestos fenólicos, provocando la interrupción de la cadena respiratoria, la alteración
de canales iónicos de membrana, las alteraciones del flujo de electrones y el transporte
activo (Denyer y Hugo, 1991b).
Burt et al. (2007) observaron que al exponer las células a concentraciones subletales
de agentes antimicrobianos naturales (como carvacrol y timol), se produjeron cambios
en la concentración de los ácidos grasos de la membrana celular, aumentando los ácidos
grasos insaturados. Cuando las bacterias Gram-negativas fueron expuestas al carcacrol,
observaron que este compuesto era capaz de desintegrar la membrana externa de estas
bacterias, favoreciendo así la salida de lipopolisacáridos e incrementando la
permeabilidad de la membrana citoplasmática (Lambert et al., 2001), provocando con
ello la salida del ATP, la inhibición de las ATPasa y la disminución de la fuerza motriz
de protones.
De acuerdo con Ultee et al. (2000), se pueden distinguir tres fases físicas de las
membranas celulares: una bicapa en fase gel (cadena de lípidos ordenada), una bicapa
en fase líquida-cristalina (cadena de lípidos desordenada) y una estructura hexagonal.
Para una funcionalidad biológica optima, la membrana debe mantenerse en estado
fluido líquido cristalino, por lo que la actividad del carvacrol, probablemente tenga
efecto a este nivel, ya que se ha observado que conforme aumenta la concentración de
carvacrol, mayor es la cantidad de este componente acumulado en la membrana y por
consiguiente mayor es el daño. Estudios en B. cereus analizaron el mecanismo de
acción del carvacrol, encontrando que el grupo OH- del compuesto y la presencia de un
sistema deslocalizador de electrones son requisito importante para la actividad
antimicrobiana de este compuesto. El carvacrol interactúa con la membrana celular
disolviéndose en la bicapa fosfolipídica, alineándose entre las cadenas de ácidos grasos.
43
Esta distorsión de la estructura física puede causar la expansión y desestabilización de la
membrana, aumentando su fluidez y provocando un aumento en su permeabilidad
(Ultee et al., 2002).
El mecanismo de acción del timol es semejante al del carvacrol, ya que su estructura
química es similar. Es capaz de desintegrar la membrana externa de las bacterias Gram-
negativas, permitiendo así la salida de lipopolisacáridos e incrementando la
permeabilidad de la membrana citoplasmática (Helander et al., 1998). Lambert et al.
(2001) estudiaron el mecanismo de acción del timol frente S. thyphymurium y S. aureus,
concluyendo que este agente antimicrobiano se une a las proteínas hidrofóbicas de la
membrana mediante puentes de hidrógeno, lo que permite un incremento en la
permeabilidad, afectando la homeostasis del pH y la concentración de iones. Lambert y
Pearson (2000) señalaron que el timol cambia la permeabilidad de las células
microbianas, dejando así que salgan iones, ATP, ácidos nucleicos y aminoácidos,
esenciales para el metabolisimo. Estos efectos causan un incremento en la fase lag,
provocando una disminución en la carga microbiana total.
Chaibi et al. (1997) confirmaron que en células de B. cereus y Clostridium botulinum
el timol puede inhibir alguno de los diferentes procesos involucrados en la transición de
espora a célula, como la germinación, el crecimiento y la multiplicación celular. Para
inhibir la multiplicación celular era necesario menos cantidad de timol, posiblemente
por su carácter hidrofóbico. Falcone et al. (2005) encontraron q para una concentración
de timol de 50 a 250 ppm se veía un efecto dosis dependiente, mientras q cuando la
concentración era igual o superior a 500 ppm no se observó crecimiento alguno, efecto
totalmente inhibitorio. También observaron que este efecto inhibitorio es mayor en
Bacillus subtilis, seguido de Bacillus cereus y por último de Bacillus licheniformis.
1.7.2.4. Aplicaciones.
Muchos son los autores que han controlado el desarrollo de distintos
microorganismos patógenos en alimentos. Roller y Seedhar (2002) utilizaron una
solución de carvacrol y cinamaldehido para controlar la carga microbiana en kiwi y
melón. Para ello, la fruta se sumergió en soluciones de 0,15-0,75 μL/mL de ambos
44
compuestos, siendo el tratamiento menos efectivo en melón, posiblemente debido a la
diferencia de pH entre ambas frutas más ácido en el kiwi que en el melón.
También son muchos los estudios que han comprobado el efecto sinérgico contra
microorganismos cuando se utilizan distintos aceites esenciales de forma conjunta, o
bien, cuando se combinan con otros antimicrobianos naturales u otras técnicas de
procesado. Hay varias hipótesis que demuestran que el carvacrol puede incrementar el
número, tamaño o la duración de la existencia de poros creados por nisina en la
membrana celular (Periago y Moezelar, 2001).
Actualmente, el uso de aceites esenciales está ampliamente extendido sobre todo tipo
de productos: carne, pescados, arroz, productos lácteos, frutas y hortalizas.
1.8. MÉTODOS COMBINADOS DE CONSERVACIÓN.
La aparición de nuevos métodos de inactivación microbiana, ha hecho que se vuelva
considerar la aplicación de técnicas combinadas (Raso y Barbosa-Cánovas, 2003),
basada en la “Teoría de Barreras” de Leistner, (2000). Esta teoría se basa en la
conservación de alimentos mediante la aplicación de varias “barreras” o métodos de
conservación aplicados de forma simultánea y/o sucesiva, con objeto de mejorar el
efecto letal conseguido por cada una de ellos por separado, de forma, que se puedan
obtener productos seguros sin un detrimento de su calidad organoléptica ni nutricional.
Conocer con exactitud el mecanismo de inactivación de cada una de las distintas
técnicas de conservación permite elegir tratamientos que al aplicarlos de forma conjunta
obtengan un efecto sinérgico, permitiendo así reducir su intensidad, disminuyendo, por
lo tanto, las alteraciones o daños que pudieran ocasionar sobre el producto.
La existencia de un daño subletal en las envolturas celulares de los
microorganismos es importante en la conservación de alimentos por procesos
combinados (Mackey, 2000). Ya que las células microbianas dañadas presentan menor
resistencia a condiciones adversas. Distintos estudios han comprobado que la existencia
de daños subletales en las envolturas celulares y/o poros reversibles, son de gran
utilidad en el desarrollo de técnicas combinadas con otros agentes o antimicrobianos
naturales (Raso y Barbosa-Cánovas, 2003). La aplicación simultánea de nisina (0,15
μg/mL) y carvacrol o timol (0,3 mmol/L) causó una mayor disminución del crecimiento
45
de cepas de B. cereus que cuando los antimicrobianos fueron aplicados individualmente
(Periago et al., 2001). Estos mismos autores consiguieron la máxima reducción de la
viabilidad en células que habían experimentado un tratamiento térmico previo a 45 ºC.
La acción sinérgica de nisina y carvacrol fue mayor a 30 ºC que a 8 ºC a pH 7, lo que
parece indicar que la temperatura induce cambios en la permeabilidad de la membrana.
1.9. TÉCNICAS RÁPIDAS DE DETECCIÓN DE MICROORGANISMOS:
LA CITOMETRÁ DE FLUJO.
En determinadas circunstancias, las industrias de alimentación necesitan técnicas
rápidas de detección y estimación del número de microorganismos viables en un
alimento. La citometría de flujo, conjuntamente con el uso de fluorocromos, parece
satisfacer estas necesidades (Nuñez, 2001, Invitrogen, 2012).
Esta técnica permite conocer no sólo el número de microorganismos, sino también el
estado fisiológico de los mismos, permitiendo así diferenciar la presencia de distintas
subpoblaciones. Esta información no se puede obtener con los métodos tradicionales de
recuento en placa y pruebas bioquímicas.
La citometría de flujo comenzó a desarrollarse en los años veinte del siglo pasado,
para analizar suspensiones coloidales y poder detectar, contar y medir el tamaño de las
partículas de los aerosoles. Fue en los años setenta, cuando los avances en el campo de
la óptica y de la fluorescencia permitieron el desarrollo de esta técnica para poder ser
utilizada en el análisis de células.
En esencia, un citómetro de flujo es un equipo que consigue un flujo de células, el
cual es atravesado por una luz láser. El láser, al impactar con las células, produce una
serie de señales que son recogidas por detectores y fotomultiplicadores, los cuales
transforman la luz emitida en una señal electrónica (voltaje), que puede ser cuantificada.
También puede presentar un sistema “sorting” para la separación de las subpoblaciones
celulares.
Las células, arrastradas por un fluido envolvente, que generalmente es una solución
salina, son bombeadas al interior del citómetro de flujo a través de un conducto sobre el
cual incide el haz del láser, y que es tan estrecho, que las células tienen que pasar a su
través una detrás de otra.
46
Figura 1.10. Esquema del fundamento del citómetro de flujo.
El láser más común es el de argón, de 488 nm, ya que a esta longitud de onda, se
excitan la mayoría de los fluorocromos. También se utiliza el láser de diodo de 635 nm.
En su interior, el citómetro de flujo presenta una serie de lentes y filtros que seleccionan
y dirigen la emisión y la excitación de los haces de luz. Al atravesar el rayo de luz, las
células interaccionan con éste, causando dispersión de la luz. Basándose en la difracción
de la luz en sentido frontal, se puede evaluar el tamaño de las células que pasan
(parámetro denominado Forward Scatter, FSC) y al medir la reflexión de la luz de
manera lateral se evalúa la granularidad o complejidad de éstas (parámetro denominado
Side Scatter, SSC). Además de la dispersión de la luz, si previamente a su análisis se
coloca a las células en presencia de anticuerpos marcados con moléculas fluorescentes,
o son teñidas con fluorocromos específicos o bien presentan autofluorescencia, se puede
obtener más información con respecto a su naturaleza y a su estado fisiológico. El uso
de moléculas fluorescentes distintas (con distintos colores de fluorescencia) permite
analizar la presencia de varios marcadores de manera simultánea. Los detectores más
frecuentes son los de fluorescencia verde (FL1; 530 nm), naranja (FL2; 585 nm) y roja
LLuuzz eemmiittiiddaa
CCéélluullaass
LLuuzz
ddiissppeerrssaaddaa
47
(FL3; > 650 nm). El parámetro de forma (FSC) es captado por un fotodiodo, mientras
que el parámetro de tamaño (SSC) y las emisiones fluorescentes son captadas por
fotomultiplicadores. Ambos, fotodiodos y fotomultiplicadores, generan una señal
eléctrica cuando los fotones inciden sobre ellos, proporcional al número de fotones, que
es amplificada a un voltaje. Y es este voltaje el que puede ser procesado
electrónicamente. Los restos y el ruido electrónico también pueden generar un voltaje
determinado, por lo que para obviar este voltaje, habría que fijar un umbral, y sólo se
reconocerían señales con voltaje superior a este umbral establecido.
Los resultados pueden ser analizados de diversas maneras. Los parámetros
estadísticos más utilizados son los recuentos totales, recuentos en regiones definidas,
media, desviación estándar y coeficiente de variación. Las formas de mostrar los
resultados también son muy variadas: diagramas de dispersión de puntos, histogramas,
diagramas de densidad o tablas con estadísticas.
La citometría de flujo es una técnica muy útil para el recuento y análisis de células en
suspensión, en una concentración de al menos 103 ufc/mL. El uso de esta técnica está
ampliamente extendido en medicina, para el contaje de células sanguíneas y también de
otros tipos de células. En la industria alimentaria, también se ha utilizado esta técnica en
la industria cervecera y otro tipo industrias de alimentos líquidos (vino, leche, zumos de
frutas, etc.) para comprobar la viabilidad de los cultivos iniciadores de estos productos,
poder detectar patógenos y microorganismos alterantes, comprobar si los
microorganismos esporulados están germinando o no, o incluso para cuantificar la
eficacia de antisépticos o bacteriocinas (Berney, et al., 2006a; Berney, et al., 2006b;
Boulos, et al., 1999).
La citometría de flujo permite conocer la viabilidad de las células utilizando
compuestos fluorescentes capaces de cuantificar parámetros como la actividad
enzimática, la integridad de membrana, contenido en ácidos nucleicos o el potencial de
membrana entre otros. En general, se deben utilizar dos o más técnicas
simultáneamente. Normalmente se combina una técnica positiva con un parámetro vital
(por ejemplo la actividad enzimática) con otra negativa para otro parámetro vital (por
ejemplo, la integridad de membrana) (Hernlem y Hua, 2010).
48
2. JUSTIFICACIÓN Y OBJETIVOS
El tratamiento térmico ha sido y es el método de conservación por excelencia en la
conservación de alimentos. Sin embargo, la aparición en los últimos años de
microorganismos resistentes a los tratamientos térmicos tradicionales ha hecho que la
tendencia de la industria alimentaria haya sido la de incrementar los tiempos y las
temperaturas de dichos tratamientos. Con ello se pretende garantizar la seguridad
microbiológica de los alimentos, pero conlleva un sobreprocesado de los productos, con
el consiguiente detrimento de las características organolépticas y nutricionales de los
mismos.
51
Esto ha hecho que parte de las industrias alimentarias busquen métodos alternativos a
los tratamientos térmicos para la conservación de alimentos. No obstante, ninguno de
estos métodos es capaz de garantizar la seguridad y estabilidad alimentaria, cuando es
aplicado de manera individual. Por esto, la tendencia actual como solución a sus
problemas es la búsqueda de un efecto sinérgico en la combinación de los distintos
métodos de conservación.
Una de los métodos alternativos es la utilización de antimicrobianos naturales, tanto
de bacteriocinas como de distintos compuestos presentes en los aceites esenciales de
distintas hierbas aromáticas y especias. La combinación de antimicrobianos naturales
con un tratamiento térmico permitiría reducir la intensidad de éste, mejorando la calidad
del producto final, que es una de las principales demandas del consumidor actual.
Para garantizar la seguridad de los alimentos sometidos a cualquiera de estos
procesos de conservación, es necesario conocer y poder predecir las cinéticas de
inactivación de los microorganismos, así como las cinéticas de crecimiento de los
supervivientes presentes en los alimentos tratados.
El objetivo final de esta Tesis Doctoral es optimizar los tratamientos térmicos
aplicados de manera individual y/o combinados con compuestos antimicrobianos,
garantizando la seguridad y estabilidad alimentaria. La investigación se ha llevado a
cabo sobre bacterias Gram positivas, bacterias Gram negativas y esporos bacterianos,
dado que las grandes diferencias existentes entre estos grupos de microorganismos
condicionan el efecto de los tratamientos.
Con la finalidad de alcanzar este objetivo se plantearon los siguientes objetivos
parciales:
Estudiar el efecto de las características del medio y de la velocidad de
calentamiento y enfriamiento sobre la resistencia al calor de microorganismos
esporulados.
Estudiar el efecto de la adición de antimicrobianos naturales al medio de
calentamiento y de recuperación sobre la resistencia al calor de microorganismos
esporulados expuestos a tratamientos de calentamiento isotérmico y no
isotérmico.
52
Evaluar el efecto combinado de un tratamiento térmico previo sobre el
crecimiento en presencia de antimicrobianos naturales de diversas especies de
bacterias vegetativas en alimentos y en un medio de referencia.
Profundizar en el conocimiento del mecanismo de acción de estos procesos
combinados.
Estudiar la validez de modelos matemáticos para predecir el comportamiento de
los microorganismos sometidos a estos métodos de conservación de alimentos.
53
3. AIM AND IMPACT
Heat treatment has been the most widely used procedure for microbial inactivation in
food. Neverthelees, the finding in recent years of microosganisms able to survive to
these traditional treatments has led food industries to increase treatment times and
temperatures.Such increases aim to ensure food safety, but involves an overproccesing
of food products, which unfortunately entails unwanted side effects in the organoleptic
and nutritional properties.
This limitation has promoted the development of alternative methods to heat
treatments for food preservation. However, none of these new technologies is able to
ensure food safety and stability, when applyed individually. Consequently, present
56
trends include to look for synergistic effects when, at least, two of these methods are
combined.
One of the alternative methods is the addition of natural antimicrobials, either
bacteriocins or different compounds present in the essential oil of aromatic herbes and
spices. The combination of natural antimicrobials with a heat treatment could help to
reduce its intensity, improving the quality of the final product, wich is actually, one on
the most important requests of present consummers.
In order to ensure the microbiological safety of food products exposed to these
treatments, there is a need for accurate predictions of microbial inactivation kinetics, as
well as for growth kinetics of the survivors.
The aim of this Thesis is to optimize the heat treatments applied individually and/or in
combination with natural antiicrobials, ensuring both, food safety and stability. The
research has been carried out with Gram positive bacteria, Gram negative bacteria and
bacterial spores, since differences among these groups are expected to determine the
effects of the treatments.
Within this global aim, several more specific objectives were set:
To explore the effect of the medium characteristics and the heating and cooling
rates on the heat resistance of sporeformig bacteria.
To explore the effect of the addition of natural antimicrobials to the heating and
recovery media on the heat resistance of sporeformig bacteria exposed to
isothermal and non-isothermal treatments.
To assess the combined effect of a previous heat treatment on the growth in
presence of natural antimicrobials of different vegetative bacteria in food and in
a reference medium.
To explore the mechanism of action of these combined processes.
To explore the suitability of mathematical models to predict the behaviour of
microorganisms exposed to these preservation technologies.
57
4. MATERIALES Y MÉTODOS
4.1. Microorganismos.
A lo largo de esta investigación se utilizaron los siguientes microorganismos:
- Listeria monocytogenes CECT 4031, suministrada por la Colección
Española de Cultivos Tipo (CECT).
- Listeria monocytogenes Scott A NCTC 11994, suministrada por Institute
of Food Research.
- Salmonella enterica serovar Enteritidis CECT 4300, suministrada por la
CECT.
60
- Salmonella enterica serovar Senftenberg CECT 4565, suministrada por la
CECT.
- Bacillus cereus INRA ATZ421, suministrada por la colección de cultivos
del Institut National de la Recherche Agronomique.
- Bacillus licheniformis CECT 4525, suministrada por la CECT.
- Bacillus subtilis AdHC1, suministrada por Unilever Bestfoods Research
Vlaardingen.
- Bacillus subtilis CECT 4071, suministrada por la CECT.
- Bacillus sporothermodurans cepa IC4, suministrada por Unilever
Netherlands Sourcing Unit Oss.
4.2. Preparación de los microorganismos.
4.2.1. Células vegetativas.
Las cepas de L. monocytogenes 4031 y S. enterica se mantuvieron en placas de agar
triptona soja (TSA) suplementadas con un 0,6 % (m/V) de extracto de levadura
(TSAYE; Scharlau Chemie, Barcelona, España) a 4°C.
Los cultivos se prepararon tomando una colonia de la placa que se inoculaba en
caldo de triptona soja (TSB; Scharlau Chemie) enriquecido con un 0,6% (m/V) de
extracto de levadura (TSBYE) y se incubaba a 37ºC durante 24 horas. De este cultivo se
tomaba una muestra con un asa de siembra que se subcultivaba en TSBYE otras 24
horas a 37ºC, hasta que los microorganismos alcanzaban la fase estacionaria, con una
concentración aproximada de 109 células/mL.
4.2.2. Esporas.
El medio de esporulación que se utilizó para B. cereus, ambas cepas de B. subtilis y
B. licheniformis fue agar de recuento en placa (PCA; Scharlau Chemie).
61
Cada placa de Petri fue inoculada con 0,2 mL de un cultivo crecido 24 horas a 37ºC
en caldo infusión de cerebro y corazón (BHIB; Scharlau Chemie), sembrado a partir de
una colonia aislada de una placa de agar. Las placas así inoculadas se incubaron a 37ºC.
Para la obtención de esporos de B. sporothermodurans se realizó una siembra en
estría en placas de PCA que se incubaron a 30ºC durante 24 horas. De esta placa de agar
se tomaron 4 colonias aisladas que se suspendieron en una disolución de NaCl (Panreac,
Barcelona, España) al 0,85%. Posteriormente, se inocularon con 0,2 mL de esta
suspensión en placas de agar de esporulación de Campdem (CSA; Brown et al., 1984)
que contienen 28g/L de agar nutritivo (Scharlau), 0,1 g/L de MnSO4 (Panreac), 0,056
g/L de CaCl2 (Panreac), 3g/L de agar bacteriológico (Scharlau). Estas placas se
incubaron a 37ºC.
Para todos los microrganismos, las placas inoculadas se incubaron durante al menos
5 días, hasta asegurar mediante microscopía de contraste de fases (Leica DM LS.
Wetzlar, Alemania), una tasa de esporulación de, al menos, el 90%.
Los esporos se recogieron de las placas mediante inundación con agua destilada
estéril y arrastre con una varilla estéril. Después de ser recogidas, las suspensiones de
esporos se centrifugaron 3 veces durante 20 minutos a 3.000g en una centrífuga
(Haraeus Instruments, Hanau, Alemania). La concentración final de esporas se ajustó a
109 esporas/ mL con agua destilada estéril y se almacenó a 4ºC.
4.3. Compuestos químicos.
Las soluciones madre de nisina, carvacrol y timol (todos de Sigma-Aldrich Chemie,
Steinheim, Alemania) a concentraciones de 0,3 mM para nisina (N) y 0,5 M para
carvacrol (C) y timol (T) se prepararon en un 95 % de etanol y se almacenaron a 4ºC
hasta su uso.
4.4. Preparación del zumo de zanahoria.
El zumo de zanahoria se preparó a partir de zanahorias frescas de la variedad
Nantesa, suministradas por una empresa local de productos mínimamente procesados.
Las zanahorias se pelaron, lavaron y trocearon. El zumo se preparó utilizando una
62
licuadora convencional y se filtró a través de un colador metálico. El zumo de zanahoria
obtenido se dispensó en tubos que se trataban con vapor durante 15 minutos, y se
almacenaban a –40°C. Los inhibidores naturales presentes en las zanahorias se
destruyen por este tratamiento térmico (Valero et al., 2000). El pH final del zumo de
zanahorias fue de 6,14±0,10. Justo antes de los experimentos, los tubos se trataban otra
vez con vapor durante 15 minutos, y posteriormente se ajustaba la temperatura a 37°C.
4.5. Curvas de crecimiento.
Cuando el crecimiento se produjo en caldo de cultivo TSB, las curvas de crecimiento
se realizaron mediante medidas de absorbancia, llevadas a cabo en un espectrofotómetro
y en un Bioscreen C.
En el caso del crecimiento en zumo de zanahoria, la turbidez del medio impedía la
estimación del crecimiento mediante medidas de absorbancia, y se tuvieron que realizar
curvas de crecimiento mediante recuento en placa.
Se realizaron curvas de crecimientos con distintas concentraciones de nisina y
carvacrol para conocer el efecto antimicrobiano de estos compuestos sobre los distintos
microorganismos. En todos los casos, se comprobó que la cantidad de alcohol
adicionada con los compuestos antimicrobianos no tenía efecto alguno sobre los
microorganismos.
En ocasiones, se aplicó un tratamiento térmico a los cultivos de microorganismos,
previo a su incubación en las condiciones de cultivo seleccionadas, con objeto de
conocer su efecto en el crecimiento de los supervivientes al mismo.
4.5.1. Curvas de crecimiento realizadas por medida de la absorbancia en un
espectrofotómetro.
En el caso de L. monocytogenes, las medidas de absorbancia se llevaron a cabo en un
espectrofotómetro (ZUZI 4110RS, Auxilab, Beriáin, Spain) a una longitud de onda de
620 nm. Se prepararon tubos de 5 mL de TSBYE con nisina y/o carvacrol y se
incubaron a 37ºC y, a tiempos preestablecidos, se tomaron medidas de la absorbancia a
dicha longitud de onda. Para ver el posible efecto de estas sustancias antimicrobianas
63
sobre este microorganismo se utilizaron diferentes concentraciones de nisina (0,13, 0,26
y 0,39 µM) y carvacrol (0,11, 0,22, 0,33, 0,44 y 0,66 mM) solas y combinadas (0,13 µM
N + 0,11 mM C y 0,13 µM N + 0,22 mM C).
Los compuestos antimicrobianos se adicionaban al medio previamente a la
inoculación del microorganismo, en una concentración inicial de 103 ufc / mL, para
poder estudiar así el posible efecto de estos compuestos en la fase de latencia o en la
velocidad de crecimiento de estos microorganismos.
4.5.2. Curvas de crecimiento realizadas por medida de la absorbancia en un
Bioscreen.
Los estudios sobre el efecto de los compuestos antimicrobianos en el crecimiento de
S. Senftenberg y S. Enteritidis, se llevaron a cabo mediante medidas de absorbancia a
420-580 nm en placas microtiter en un Bioscreen C analyzer con baja agitación (Lab
Systems, Helsinki, Finlandia). Para estos microorganismos, las curvas de crecimiento se
realizaron en TSBYE con nisina y/o carvacrol a 37ºC y se utilizaron diferentes
concentraciones de nisina (0,13, 0,26, 0,39 y 1,2 µM) y carvacrol (0,11, 0,33, 0,55 y
0,77 mM) solas y combinadas (1,2 µM N + 0,77 mM C), añadidas al medio con
anterioridad a la adición del inóculo del microorganismo, en una concentración de
103ufc/mL.
4.5.3. Curvas de crecimiento realizadas por recuento en placa.
Las curvas de crecimiento de L. monocytogenes en zumo de zanahoria se realizaron
añadiendo una concentración de nisina 0,13µM y/o una concentración 0,33 o 0,66 mM
de carvacrol, solas o combinadas, que se añadían al medio antes de ser inoculados con
una concentración de microorganismos de 103 ufc/mL para comprobar su efecto
inhibitorio y se incubaban durante 24 horas a 37ºC. Pasado este tiempo de incubación se
sembraban diluciones seriadas de cada condición en placas de TSAYE y se incubaban a
37ºC durante 24 horas.
4.5.4. Tratamiento térmico previo.
64
Para los experimentos realizados con L. monocytogenes y S. enterica se seleccionó
un tratamiento térmico moderado de 15 min a 55°C por producir una reducción de 3
ciclos logarítmicos en L. monocytogenes CECT 4031 y S. Enteritidis y de un ciclo
logarítmico en la población de L. monocytogenes Scott A y S. Senftenberg.
Los cultivos de trabajo se dividían en dos alícuotas. Una de ellas se utilizaba para el
control no tratado y a la otra se le aplicaba dicho tratamiento térmico. El cultivo control
se diluía hasta 103 células/mL, mientras que el cultivo expuesto al tratamiento térmico
se diluía hasta 106 cells/mL.en el caso de L. monocytogenes y S. Enteritidis y hasta 104
cells/mL para S. Senftenberg. Así se aseguraba que cuando comenzaba el crecimiento,
todos los cultivos partían del mismo número inicial. Este tratamiento térmico se aplicó a
los cultivos crecidos en TSBYE durante 24 h a 37 °C, colocando estos tubos en un baño
de agua precalentado a 55ºC (Frimengruppe Press-Daimier, Dresden, Alemania). Antes
y después del tratamiento térmico, se realizaron diluciones seriadas en agua de peptona
tamponada (APT, Scharlau Chemie) y se sembraron en placas de TSAYE para conocer
la tasa de inactivación del tratamiento. Las placas se incubaron durante 24 horas a 37°C.
4.5.5. Modelización de las curvas de crecimiento.
Las curvas de crecimiento para estudiar el efecto de la nisina y el carvacrol sobre L.
monocytogenes y S. enterica se construyeron representando las medidas de absorbancia
(unidades de densidad óptica; u. D.O.) frente al tiempo de exposición en horas (t). Las
medidas de absorbancia de un cultivo son sólo una estimación de su crecimiento pero,
siguiendo el método propuesto por Smelt et al. (2000), se pueden convertir estas
medidas de la densidad óptica en estimaciones de la fase de latencia ( ) (Ecuación 3.1).
De acuerdo con estos autores, para poder estimar este parámetro, es necesario tener en
cuenta una serie de consideraciones. La fase de latencia se define como el tiempo
necesario para que las células puedan adaptarse a las nuevas condiciones del ambiente y
dividirse en dos células hijas. Después de esta primera división, las células se considera
que crecen inmediatamente a su mayor velocidad de crecimiento (µmax ). El tiempo de
generación ( ) se calcula para cada una de las concentraciones de los distintos
antimicrobianos. Las primeras muestras de turbidez aparecen cuando el número de
65
microorganismos es de 106 ufc / mL para ambos microorganismos, valor que se
corresponde con 9,97 generaciones (Ng)
t = tt – (gt Ng) Ec. 3.1
donde tt es el tiempo al que aparece la turbidez.
Las curvas de crecimiento resultantes se ajustaron mediante la función propuesta por
Baranyi et al. (1993) (Ecuación 1.2), reproducida aquí para facilitar la lectura de este
capítulo.
Ec. 1.2
Las condiciones en las que pasados 15 días de incubación a 37ºC no se observaba un
aumento de la turbidez se sembraban en placas de TSA y se incubaban a 37ºC durante
24 horas para comprobar el número de microorganismos presentes en el cultivo.
Estos experimentos se realizaron, al menos, por triplicado.
4.5.6. Análisis estadístico.
Los análisis de varianza y los test de Duncan´s se realizaron con el programa
Statgraphics Plus v. 5.1 (Statpoint Technologies, Inc, Warrenton, VA, USA). Las
diferencias entre los datos se consideraron significativas cuando p≤0.05.
4.6. Determinación de la resistencia térmica.
4.6.1. El termorresistómetro Mastia.
Las determinaciones de termorresistencia se llevaron a cabo en un
termorresistómetro
y(t) = yo + max A (t) - –– ln (1 + –––––––––––––– ) em max A(t) – 1
em (ymax – yo)
1
m
66
Mastia (Conesa et al., 2009), que es una modificación del termorresistómetro TR-SC
(Condón et al., 1993), que permite llevar a cabo rampas de calentamiento y
enfriamiento a distintas velocidades. El esquema del termorresistómetro se muestra en
la Figura 3.1. El aparato está formado por un vaso de calentamiento (E) de acero
inoxidable, con unas dimensiones de 8,5 x 12 cm de diámetro externo y una pantalla
deflectora para mejorar la turbulencia. Este vaso está cerrado por una tapa provista de
una junta tórica (F), atravesada por un eje de agitación, provisto con una hélice (3) y
ocho puertos con cierres roscados para: la fuente de presión (N2) (G); la inyección del
inóculo, a través de un septum de cromatografía de gases; el tubo de recogida de
muestras (4); un termopar (5) para monitorizar la temperatura durante el tratamiento;
dos puertos para los brazos de la resistencia (2) y otros dos para los brazos del serpentín
de refrigeración.
Para poder llevar a cabo la extracción de muestras a través del tubo, desde el vaso
principal cuando la presión es muy baja (temperaturas inferiores a 100ºC) o cuando el
medio es demasiado viscoso, éste está presurizado mediante un manómetro (6)
conectado a la fuente de presión (G). Para poder vencer la presión cuando los
microrganismos son inyectados, se utiliza una jeringuilla Hamilton (H). El eje de
agitación está accionado por un motor (I), conectado con el autómata (B). La
temperatura en el interior del vaso se regula mediante un PID (Proporcional Integral
Derivativo) (J), conectado a la resistencia (2), a una válvula solenoide (8) que regula el
flujo de agua a través del serpentín de refrigeración (1), y a la Pt100 (5). Cuando el PID
detecta que la temperatura es inferior a la seleccionada el autómata activa la resistencia
(2); cuando la temperatura supera la programada, el autómata actúa sobre la válvula
solenoide (8) para controlar el flujo de agua fría por el serpentín (1).
67
Figura 3.1. Diagrama de un termorresistómetro Mastia: (A) Agua de enfriamiento;
(B) autómata programable; (C) pantalla táctil; (D) ordenador; (E) vaso principal; (F)
tapa; (G) fuente de presión (N2); (H) jeringuilla Hamilton; (I) motor de agitación; (J)
PID, (1) serpentín de refrigeración; (2) resistencia; (3) hélice; (4) tubo de extracción de
muestra; (5) Pt100; (6) manómetro; (7) válvula solenoide; (8) válvula solenoide del
sistema de enfriamiento.
El termorresistómetro puede ser programado para trabajar en modo isotérmico, en
modo no isotérmico con incrementos o descensos regulares de la temperatura e incluso
en modos más complejos, simulando tratamientos industriales y combinando fases de
calentamiento, mantenimiento y enfriamiento.
4.6.2. Determinaciones de termorresistencia de microorganismos en el
termorresistómetro Mastia.
Para llevar a cabo los tratamientos isotérmicos, una vez que el vaso lleno con el
medio de calentamiento seleccionado se estabilizaba a la temperatura de tratamiento
68
seleccionada, se inoculaban 0,2 mL de la suspensión de microrganismos y se recogían
las muestras en tubos estériles a los tiempos previamente seleccionados. Las muestras
eran inmediatamente enfriadas, posteriormente se realizaban las diluciones apropiadas
en agua de peptona tamponada (APT; Scharlau Chemie), a partir de las cuales se
sembraban las placas de Petri y se les añadía el medio de cultivo determinado para cada
microrganismo y se incubaban a las temperaturas y tiempos seleccionados.
Como medios de calentamiento para la determinación de los valores de
termorresistencia de B. sporothermodurans se utilizaron tampón McIlvaine de distintos
pH (3, 5 y 7) y crema de calabacín de pH 6,3 (Alvalle, Murcia, Spain). En el caso de B.
cereus, B. subtilis 4071, B. subtilis AdHC1 y B. licheniformis el medio de calentamiento
que se utilizó fue BHIB, al que se le adicionaban las distintas concentraciones de timol
seleccionadas.
Para el estudio de la termorresistencia de B. sporothermodurans bajo condiciones no
isotérmicas, el termorresistómetro se programó para las rampas de calentamiento a una
temperatura inicial de 110ºC y a dos velocidades distintas de calentamiento, 1 y 10ºC
por minuto. En el caso de los tratamientos de enfriamiento se programó una temperatura
inicial de 126ºC para las rampas de 1ºC/min y de 130ºC para las rampas de 10ºC/min.
Para la realización de los tratamientos no isotérmicos, una vez estabilizada la
temperatura inicial, se inoculaba 0,2 mL de la suspensión de esporos y se recogían las
muestras en tubos estériles a intervalos predeterminados de tiempo. Las muestras se
procesaban como se ha descrito anteriormente para los tratamientos isotérmicos.
4.6.3. Recuperación de supervivientes.
El recuento de microrganismos viables se realizó a partir de la siembra por
duplicado, de las diluciones apropiadas de las muestras en APT, en agar triptona soja
(TSA; Scharlau Chemie) + 0,6% YE para L. monocytogenes y S. enterica y en BHIA
para B. sporothermodurans y en BHIA con la concentración predeterminada de timol
para Bacillus spp. Las placas se incubaron durante 24 horas a 37ºC para todos los
microrganismos. Tiempos más largos de incubación no mostraron cambios
significativos en los recuentos.
69
4.6.4. Análisis de datos.
4.6.4.1. Cálculo de los valores D y z en condiciones isotérmicas.
Todos los microorganismos investigados mostraron, a excepción de B.
sporothermodurans, cinéticas logarítmicas de destrucción cuando fueron sometidos a
condiciones isotérmicas de tratamiento. Para estos microorganismos, el cálculo de los
tiempos de reducción decimal (valores DT), se realizó con el clásico modelo lineal
(Bigelow, 1921), y se calcularon como la inversa negativa de la pendiente de la línea de
regresión obtenida a partir de los valores de la curva de supervivencia.
Los valores z se calcularon como la inversa negativa de la pendiente de la linea de
regresión resultante de representar los valores del logaritmo de DT frente a las
correspondientes temperaturas de tratamiento (curvas de termodestrucción o TDT). La
dependencia de los valores DT con la temperatura puede ser descrita matemáticamente
mediante la ecuación 1.9, reproducida aquí para facilitar la lectura de este capítulo.
Ec. 1.9
donde DT (min) es el valor D a la temperatura T (ºC), DTref (min) el valor D a la
temperatura Tref (ºC) y z (ºC) representa el valor z del microorganismo.
El efecto de las diferentes concentraciones de timol en el medio de recuperación en
los valores D se modelizó utilizando un modelo secundario basado en el modelo de
Mafart y Leguerinel (1998) (ecuación 3.2)
Ec. 3.2
donde es el incremento en la concentración de timol en el medio de
recuperación que conlleva a una reducción decimal en el valor D y es el valor D, a
esa misma temperatura, sin timol en el medio de recuperación.
z
TT
T
ref
refDTD
10)(
70
Los valores ztimol se calcularon como la inversa negativa de la pendiente de la línea
de regresión resultante de representar los valores del logaritmo de D frente a las
correspondientes concentraciones de timol de cada tratamiento tratamiento.
Estos métodos tradicionales, para determinar la muerte microbiana, se basan en que
esta inactivación sigue una cinética de primer orden y que la resistencia al calor de toda
la población microbiana es homogénea. Sin embargo, en las curvas de supervivencia de
B. sporothermodurans se encontraron desviaciones de esta linealidad, ya que se
observaba la presencia de hombros. Otros investigadores (van Zuijlen et al., 2010)
habían aplicado, con éxito, los modelos de Weibull y Geeraerd como modelos no
lineales, alternativos a los métodos tradicionales basados en una cinética de primer
orden. En esta investigacion también se aplicaron estos mismos modelos no lineales
para ajustar las gráficas de supervivencia de este microorganismo, en lugar de la
cinética logarítmica.
4.6.4.2. Modelo de Weibull.
Para aplicar el modelo de Weibull, se empleó la ecuación propuesta por Mafart et al.
(2002) de la función de supervivencia de la distribución de frecuencias de Weibull
(ecuación 1.7), reproducida aquí para facilitar la lectura de este capítulo:
pt
LogNLogN
0
Ec. 1.7
donde, N es el número de microorganismos tras t minutos de tratamiento y N0 es el
número de microorganismos a tiempo 0, p es el parámetro de forma y es el parámetro
de forma, que representa el tiempo necesario para reducir la población microbiana en un
ciclo logarítmico y cuya dependencia con la temperatura, al igual que los valores D
convencionales puede ser descrita con el modelo clásico de Bigelow, tal y como se
expresó en la ecuación 1.10 (Mafart et al., 2002):
Ec. 1.10
71
Para el ajuste de todas las curvas de supervivencia de B. sporothermodurans en un
mismo medio de calentamiento se utilizó un mismo valor del parámetro p, siguiendo el
modelo descrito por Couvert et al. (2005).
4.6.4.3. Modelo de Geeraerd.
Para modelizar las curvas de supervivencia de B. sporothermodurans también se
empleó el modelo dinámico propuesto por Geeraerd et al. (2005) basado en la cinética
logarítmica, descrita en la ecuación 1.4. Dado que no se observaron colas en las curvas
de supervivencia, se empleó el modelo log linear + hombro propuesto por estos autores
para estos casos (ecuación. 3.3):
Ec. 3.3
Ec. 1.15
Para modelizar las curvas de supervivencia, se empleó la ecuación 3.4, la cual se
obtiene a partir de las ecuaciones 3.3 y 1.15 (reproducida aquí para facilitar la lectura),
cuando se aplica dicho modelo a los datos experimentales.
Ec. 3.4
donde N representa el número de microorganismos (ufc/mL), N0 el número incialde
microorganismos), kref (min-1) es la tasa de inactivación específica a la temperatura de
referencia Tref (ºC) y SI la longitud del hombro.
Los parámetros del modelo fueron estimados con el programa GInaFIT (Geeraerd et
al., 2000), creado por los mismos autores.
4.6.4.4. Predicción del número de supervivientes en condiciones no isotérmicas.
refTrefTrefTrefT
refTrefT
refref
tkSlk
Slk
TT
ee
etkNN
11log
10lnloglog 0
72
En la pruebas realizadas bajo condiciones no isotérmicas, los resultados
experimentales obtenidos se compararon con los resultados predichos a partir de los
valores obtenidos en condiciones isotérmicas de los modelos no lineales de Weibull (δ,
p y z) y el modelo dinámico de Geeraerd (DT, Sl y z). Se analizó la bondad del ajuste de
los modelos de Weibull y Geeraerd y la capacidad de los mismos para predecir el
múmero de microorganismos supervivientes a los tratamientos de calentamiento y
enfriamiento.
El modelo de Weibull, para predecir el número de supervivientes en condiciones no
isotérmicas, se basa en la dependencia de δ con respecto a la temperatura (Ec. 1.10), ya
que para cada intervalo, el valor de δ depende también de la temperatura.
Cuando se empleó el modelo de Geeraerd para describir la inactivación en
condiciones isotérmicas, la dependencia de kmax con respecto a la temperatura se
describió según el modelo de Biguelow (ecuación 1.11)
Ec.1.11
4.6.5. Análisis estadístico.
Los cálculos estadísticos y las regresiones lineales de los valores D y z, así como sus
correspondientes pendientes, los coeficientes de correlación (ro) y los intervalos de
confianza para el 95%, se calcularon usando el programa Microsoft® Excel 2007 para
Windows®.
Las regresiones no lineales del modelo de Weibull fueron estimados con la
herramienta Solver de Excel (Microsoft® Excel 2000 para Windows®). Las regresiones
no lineales del modelo de Geeraerd, se realizaron usando la herramienta GInaFIT
(Geeraerd et al., 2005) para Excel. Los coeficientes de determinación (r2) y valores del
error cuadrático medio (RMSE) de dichas regresiones también se calcularon con Excel.
4.7. Citometría de flujo.
4.7.1. El citómetro de flujo.
73
Se utilizó un citómetro de flujo FACSCalibur (BD Biosciences, San José, CA, USA)
equipado con un láser de argón-ión de 488 nm y 15 mW enfriado por aire. Como fluido
envolvente para todos los estudios se utilizó FacsflowTM (BD Biosciences). En la
preparación de las muestras, también se utilizó tampón fosfato salino (PBS; Panreac,
Barcelona, España) filtrado con un filtro Millipore Millex-GN (Millipore Corporation,
Bedford, USA). Para el perfecto funcionamiento del aparato, se realizaba una limpieza
diaria y una semanal según las instrucciones del fabricante y una calibración mensual
con Beads fluorescentes (CalibriteTM three color calibration beads, BD Biosciences).
4.7.2. Fluorocromos.
Se utilizó un Baclight kit (Molecular Probes, Leiden, The Netherlands), que contiene
SYTO9 y yoduro de propidio (PI) como colorantes vitales para evaluar la viabilidad de
las células tratadas. Ambos son compuestos que se unen al ADN. El SYTO9, necesita
que la célula tenga una actividad metabólica normal para poder atravesar su membrana
e unirse a las moléculas de ADN en formación. Sin embargo, el PI, necesita que la
membrana celular no esté intacta y así poder penetrar en la célula y poder desplazar el
SYTO9 y unirse al ADN (Ananta et al., 2004).
Las células vivas teñidas con SYTO9 emiten fluorescencia verde, mientras que las
células dañadas teñidas con PI emiten fluorescencia roja. La fluorescencia verde emitida
por el SYTO9 es recogida en el canal FL1 y la fluorescencia roja emitida por el PI es
recogida a su vez en el canal FL3.
4.7.3. Preparación de las muestras.
El microorganismos utilizado para las pruebas realizadas en el citómetro de flujo fue
Listeria monocytogenes Scott A NCTC 11994. En estos experimentos se utilizaron dos
tipos distintos de cultivos, un cultivo con la población en fase de crecimiento
exponencial y otro con la población en fase de crecimiento estacionario, para poder
comprobar si el estado fisiológico de las células influía en los resultados de los
tratamientos aplicados.
74
Para la preparación de células en fase estacionaria se tomaba un asa de un tubo de
glicerol congelado y se introducía en un tubo de 5 mL de TSBYE que se incubaba de 6
a 8 horas a 37ºC. De este cultivo se tomaban 50 µL que se inoculaban en 50 mL de
TSBYE en un matraz Erlenmeyer y se incubaba a 37ºC (a 200 rpm) durante 18 h. Tras
este periodo de incubación, los microorganismos se encontraban en fase estacionaria
con una concentración aproximada de 109 ufc/mL. Para la preparación de células en fase
exponencial se tomaban 100 µL del cultivo en fase estacionaria y se inoculaban en un
matraz Erlenmeyer con 50 mL de TSBYE y se incubaban a 37ºC (a 200 rpm) durante 3
h. Tras este periodo de incubación, los microorganismos se encontraban en fase
exponencial con una concentración aproximada de 106 ufc/mL. Los 50 mL del cultivo,
exponencial o estacionario, eran introducidos en un tubo Falcon y centrifugado a 3500
rpm durante 10 min a 4ºC. Se eliminaba el sobrenadante y el depósito era resuspendido
en 50 mL de tampón salino fosfato (PBS; Panreac, Barcelona, España). Para células en
fase estacionaria, se volvía a centrifugar y el depósito era resuspendido en 2 mL de
PBS. Se tomaban 250 µL de esta suspensión y se añadían a 50 mL de PBS, obteniendo
una suspensión con una D.O.680nm de 0,2, que se corresponde con una concentración
final aproximada de 106 ufc/mL, que se mantenía en hielo hasta su uso. Para la
preparación de células en fase exponencial las dos veces se resuspendía en 50 mL de
PBS con una D.O.680nm de 0,2, que se corresponde con una concentración final de 106
ufc/mL. Los cultivos de trabajo se dividían en dos alícuotas. Una de ellas se utilizaba
para el control no tratado térmicamente y a la otra se le aplicaba el tratamiento térmico.
Así, finalmente ambos cultivos presentaban unas 105 – 106 células/mL. Para tener un
control de células muertas se le aplicó un tratamiento térmico de 80ºC durante 5
minutos.
Posteriormente, tanto las células control (vivas y muertas) como las tratadas
térmicamente eran alicuotadas en tubos de 5 mL e incubadas con las distintas
concentraciones de nisina y/o carvacrol a 37ºC durante 15 minutos. De estos tubos se
tomaban muestras de 1 mL que se incubaban con los fluorocromos en las proporciones
indicadas por el fabricante e incubadas durante 15 minutos en la oscuridad a
temperatura ambiente. Pasado este tiempo, los cultivos de las distintas condiciones eran
centrifugados a 3000 rpm y resuspendidos en la misma cantidad de PBS.
75
4.7.4. Adquisición de muestras.
Para la adquisición de datos, se utilizó el software CellQuest Pro (BD Biosciences).
Los análisis se llevaron a cabo utilizando los siguientes parámetros de detección: por su
pequeño tamaño se fijaron los parámetros de forma, forward scatter (FSC) en E00; y de
tamaño, side scatter (SSC), en 400; para los fluorocromos utilizados se fijó el valor de
FL1 en 400 y el de FL3 en 500, utilizando ganancias logarítmicas. Las muestras se
preparaban en una concentración de 105 – 106 células/mL que, pasándola con un flujo
bajo, se recogían de 200-700 eventos por segundo y un total de 10.000 eventos en cada
adquisición.
4.7.5. Recuento en placa.
Se hicieron diluciones seriadas de todas las condiciones ensayadas y fueron
sembradas en agar TSA. Para el estudio del daño subletal se sembraron en agar TSA
con un 5% de NaCl (TSA+5%NaCl; Panreac). Estas placas fueron incubadas a 37ºC
durante 48 horas. Se comprobó que tiempos más largos de incubación no aumentaban
los recuentos.
4.7.6. Análisis de datos.
Los resultados obtenidos fueron analizados con el software BD CellQuest Pro. La
fluorescencia recogida en los canales FL1 y FL3 fue analizada utilizando diagramas de
densidad de FL1 frente a SSC y de FL3 frente a SSC. Para cuantificar la población
bacteriana viva, o muerta, en cada uno de los tratamientos se construyeron diagramas de
FL1 frente a FL3 y se contaba el número de eventos que aparecía en cada cuadrante
(Paparella et al., 2008).
76
5. RESULTADOS
5.1. CAPITULO I: “Efecto de las características del medio y
de la velocidad de calentamiento y enfriamiento en la
resistencia al calor en condiciones no isotérmicas de esporos
de Bacillus sporothermodurans IC4.”
Este capítulo se corresponde con el siguiente artículo, publicado en la revista Food
Microbiology:
Esteban, M.-D., Huertas, J.P., Fernández, P.S. y Palop, A. Effect of the medium
characteristics and the heating and cooling rates on the nonisothermal heat resistance of
Bacillus sporothermodurans IC4 spores. Food Microbiology, 34: 158-163 (2013)
En los últimos años se ha observado la aparición de una serie de microorganismos
esporulados capaces de sobrevivir a los procesos tradicionales de esterilización
utilizados en la industria agroalimentaria y crecer posteriormente en las condiciones
habituales de almacenamiento. Bacillus sporothermodurans es uno de estos
microorganismos causantes de elevadas pérdidas económicas, debido a la alteración de
determinados lotes de productos tratados térmicamente. Las esporas de este
microorganismo son capaces de resistir el tratamiento térmico, y posteriormente
multiplicarse durante la vida útil del producto, a temperatura ambiente.
En esta parte de la investigación se planteó el estudio del efecto que las
características del medio de calentamiento, tales como el pH o la composición del
mismo, pudieran tener en la resistencia al calor de este microorganismo. Estos factores
se conocen para muchos microorganismos esporulados, pero no para B.
sporothermodurans. También se abordó el estudio del efecto de las velocidades de
calentamiento y enfriamiento sobre la resistencia al calor, aspecto este que apenas ha
sido explorado, pero que podría tener un efecto notable en la resistencia microbiana al
calor. El control de estos parámetros permitiría, eventualmente, reducir la intensidad de
los tratamientos térmicos aplicados, manteniendo los mismos niveles de seguridad y
estabilidad alimentaria.
Son muchos los autores que han observado que muchas de las curvas de
supervivencia de los microorganismos esporulados no siguen una tendencia lineal, sino
que presentan fenómenos de hombro y cola. Debido a estas desviaciones de la
linealidad, varios autores han desarrollado modelos no lineales que pretenden predecir
las cinéticas de destrucción de estos microorganismos. Para el análisis de los resultados
obtenidos en este capítulo se eligieron los modelos no lineales de Weibull y Geeraerd,
ya que las gráficas de supervivencia presentaban habitualmente fenómenos de hombro.
Ambos modelos ajustaron adecuadamente las gráficas de supervivencia.
Se observó que, al igual que ocurre para muchos otros microorganismos esporulados,
las características del medio de tratamiento afectaban a su termorresistencia,
disminuyendo ésta al acidificar. Por otro lado, velocidades de calentamiento de hasta
10°C/min no tuvieron efecto sobre su resistencia al calor, permitiendo predecir, también
de modo satisfactorio, los supervivientes cuando B. sporothermodurans era sometido a
tratamientos no isotérmicos de calentamiento en distintos medios. Sin embargo, a
81
velocidades de enfriamiento de 1°C/min el número de supervivientes fue superior al
predicho.
82
at SciVerse ScienceDirect
Food Microbiology 34 (2013) 158e163
Contents lists available
Food Microbiology
journal homepage: www.elsevier .com/locate/ fm
Effect of the medium characteristics and the heating and cooling rateson the nonisothermal heat resistance of Bacillus sporothermoduransIC4 spores
María-Dolores Esteban a, Juan-Pablo Huertas a, Pablo S. Fernández a,b, Alfredo Palop a,b,*
aDepartamento de Ingeniería de Alimentos y del Equipamiento Agrícola, Universidad Politécnica de Cartagena, Paseo Alfonso XIII 48, 30203 Cartagena, Murcia, Spainb Instituto de Biotecnología Vegetal, Universidad Politécnica de Cartagena, Spain
a r t i c l e i n f o
Article history:Received 3 July 2012Received in revised form27 November 2012Accepted 28 November 2012Available online 17 December 2012
Keywords:Heat resistanceInactivation kineticsBacillus sporothermoduransPredictive modelsSpores
* Corresponding author. Departamento de Ingeniepamiento Agrícola, Universidad Politécnica de Carta30203 Cartagena, Murcia, Spain. Tel.: þ34 968 32 576
E-mail address: [email protected] (A. Palop).
0740-0020/$ e see front matter � 2012 Elsevier Ltd.http://dx.doi.org/10.1016/j.fm.2012.11.020
a b s t r a c t
In recent years, highly thermo-resistant mesophilic spore-forming bacteria belonging to the speciesBacillus sporothermodurans have caused non-sterility problems in industrial sterilization processes. Theaim of this research was to evaluate the effect of the heating medium characteristics (pH and buffer/food)on the thermal inactivation of B. sporothermodurans spores when exposed to isothermal and non-isothermal heating and cooling treatments and the suitability of non-linear Weibull and Geeraaerdmodels to predict the survivors of these thermal treatments. Thermal treatments were carried out in pH3, 5 and 7 McIlvaine buffer and in a courgette soup. Isothermal survival curves showed shoulders thatwere accurately characterized by means of both models. A clear effect of the pH of the heating mediumwas observed, decreasing the D120 value from pH 7 to pH 3 buffer down to one third. Differences in heatresistance were similar, regardless of the model used and were kept at all temperatures tested. The heatresistance in courgette soup was similar to that shown in pH 7 buffer. When the heat resistance valuesobtained under isothermal conditions were used to predict the survival in the non-isothermical exper-iments, the predictions estimated the experimental data quite accurately, both with Weibull and Geer-aerd models.
� 2012 Elsevier Ltd. All rights reserved.
1. Introduction
The traditional method for determining the kinetics of the deathrate of microorganisms is based on the assumption that inactiva-tion follows first-order kinetics and that microbial populations arehomogeneous from the point of view of their heat resistance.Hence, DT values are calculated from the survival curve by linearregression of log N versus time (Stumbo, 1973). However, manyauthors have found deviations from linearity of survival curves,such us shoulders or tails. Some researchers (Fernandez et al., 1999;Peleg and Cole, 1998) explain this behaviour assuming that ata given temperature, the time of exposure to heat, which causes thedeath of a microbial cell or a bacterial spore, is variable from oneindividual to the other, and that the dispersion of individual heatresistance is governed by a frequency distribution. This fact has
ría de Alimentos y del Equi-gena, Paseo Alfonso XIII 48,2; fax: þ34 968 32 5433.
All rights reserved.
83
leaded to propose alternative models that provide with a satisfac-tory goodness of fit for non linear survival curves showing shoul-ders or tails (Geeraerd et al., 2000; Mafart et al., 2002) or evensigmoidal survival curves showing both shoulder and tail (Geeraerdet al., 2000; Coroller et al., 2006).
Bacillus sporothermodurans is a heat-resistant mesophilic spore-forming bacterium causing non-sterility problems in canned foods(Huemer et al., 1998; Oomes et al., 2007). Van Zuijlen et al. (2010)observed the presence of shoulders in the survival curves ofisothermal treatments of this microorganism and analysed the dataobtained using Weibull and Geeraerd models. Both models char-acterized the heat inactivation of the spores of B. sporothermoduransbetter than the conventional log-linear model. Although theseauthors found B. sporothermodurans a suitable microorganism toevaluate and optimize commercially applied sterilization processesfor lowacid foods, they also pointed out the influence of the heatingmenstruum characteristics on its heat resistance.
Heat resistance of microorganisms is mostly influenced by timeand temperature of treatment, but environmental factors such as pH,aw, composition ofmenstruum, etc., may drastically influence its heatresistance, even during the heat treatment (Etoa and Michiels, 1998).
0
1
2
3
4
5
6
7
0 0.5 1 1.5 2
Time (min)
Lo
g C
FU
/m
L
Fig. 1. Survival curves of Bacillus sporothermodurans IC4 at 125 �C in pH7 McIlvainebuffer (,) pH5 McIlvaine buffer (6) pH3 McIlvaine buffer (-) and in courgette soup(:). Weibull model (dashed lines); Geeraerd model (dotted lines).
M.-D. Esteban et al. / Food Microbiology 34 (2013) 158e163 159
The effect of these factors on the heat resistance of spore-formingbacteria has been extensively studied (Condón and Sala, 1992; Lópezet al., 1996; Palop et al., 1999), however their effect on the thermalresistance of B. sporothermodurans spores is not so well known.
The effect of the heating and cooling rate has been scarcelystudied. Still, some authors have used nonisothermal methods asan alternative to the study of microbial inactivation kinetics(Conesa et al., 2003; Fernández et al., 1999; Hassani et al., 2007;Peleg and Normand, 2004; Periago et al., 1998) and althoughdifferences between the heat resistance values obtained fromisothermal and nonisothermal heating experiments have beenfound (De Cordt et al., 1992; Periago et al., 1998), the extraction ofkinetic parameters from nonisothermal data has been successfullyperformed by several groups (Chen et al., 2007; Peleg andNormand, 2004; Valdramidis et al., 2008), who have obtainedequivalent parameters using isothermal and non-isothermal data,unless adaptation of the microorganism due to the use of lowheating rates (Valdramidis et al., 2006).
The aim of this research was to evaluate the effect of the heatingmedium characteristics (pH and buffer/food) on the thermal inac-tivation of B. sporothermodurans spores when exposed toisothermal and nonisothermal heating and cooling treatments andthe suitability of Weibull and Geeraerd models to predict thesurvivors to these thermal treatments.
2. Materials and methods
2.1. Bacteria strain and sample preparation
The strain used in this study was B. sporothermodurans IC4(kindly supplied by Unilever Netherlands Sourcing Unit Oss).Sporeswere prepared on Petri dishes of plate count agar (PCA) from(Scharlau, Barcelona, Spain) incubated at 30 �C for 24 h. Four purecolonies were taken from this agar plate and suspended in physi-ological salt solution. Then the agar plates containing CampdenSporulation Agar (CSA; Brown et al., 1984) were inoculated with0.2mL of this mixture. After 7 days of incubation at 37 �Cmore than90% of sporulation rate was achieved, as determined by a phasecontrast microscopy (Leica, Wetzlar, Germany).
Spores were collected by flooding the agar plates with 5 mL ofdistilled water, scratching the surface with a spatula. After har-vesting, spores were washed four times by centrifugation at3040�g for 15 min at 2e4 �C and resuspended in sterile distilledwater. The concentration of spores in the final suspension wasadjusted at 109 spores/mL with sterile distilled water. The sporesuspensions were stored at 4 �C until used.
2.2. Determination of heat resistance
All heat treatments were carried out in a thermoresistometerMastia (Conesa et al., 2009), which allows the performance ofheating ramps at different rates. The temperatures of isothermaltreatments were: 115, 120, 125 and 130 �C. For nonisothermaltreatments, the thermoresistometer was programmed to performlinear temperature profiles, starting from an initial temperature of110 �C at established rates of 1 �C/min and 10 �C/min.
Once the initial heat treatment temperature had attainedstability the menstruum (400 mL of McIlvaine buffer of pH 3, 5 and7 or a commercial courgette soup, pH 6.3) was inoculated with0.2mL of the spore suspension. At preset intervals,1mL samples foreach treatment time were collected. Viable counts were based onduplicate counts of appropriate dilutions plated in Brain HeartInfusion Agar (BHIA) (Scharlau, Barcelona, Spain) and incubated at37 �C for 24 h. Preliminary experiments showed that longer incu-bation times did not modify plate counts.
84
All resistance determinations were performed at least twice inindependent experiments at different days.
2.3. Data analysis
Survival curves showed shoulder phenomena. Hence, Weibulland Geeraerd non lineal models were used to describe such survivalcurves.
2.3.1. Weibull modelThe cumulative form of the Weibull distribution function, as
proposed by Mafart et al. (2002) was used (Eq. (1)):
log10S ¼ ��td
�p
(1)
where S(t) is the survival ratio, i.e. Nt/N0, d represents the time forthe first decimal reduction (min), which is a function of tempera-ture (see Eq. (3)), and p is the shape parameter.
In our study, we used a rate model derived from Eq. (1), repre-senting the momentary time-dependent isothermal logarithmicinactivation rate, which can be written as an ordinary differentialequation as given by Eq. (2) (van Zuijlen et al., 2010):
dNdt
¼ �p$�1d
�p
$tp�1 (2)
with the initial condition: N(0) ¼ N0.A single p value for all survival curves obtained in the same
heating media was used as proposed by Couvert et al. (2005). Forthe global optimisation, Eq. (3) was incorporated into Eq. (1) andthe parameter p was fitted in common, whereas the initial stateswere fitted for each curve.
The prediction of survivors under nonisothermal experimentswas based on the dependence of d with respect to temperature,which can be described with the classic Bigelow model as given byEq. (3) (Mafart et al., 2002):
dðTÞ ¼ dTref � 10�T�Tref
z (3)
where dTref is the d (Τ) value at the reference temperature (Tref), andz is the number of degrees Celsius change of temperature requiredto achieve a tenfold change in d value.
2.3.2. Geeraerd modelThe dynamic model of Geeraerd et al. (2000) was used. The
parameters of this model were estimated with the GInaFIT
Table 1Heat resistance values of Bacillus sporothermodurans IC 4 spores obtained under isothermal heating conditions in different heating media, as derived from the Weibull andGeeraerd models.
Temperature (�C) Weibull model Geeraerd model
d (min) p RMSE r2 D (min) SL (min) RMSE r2
McIlvaine pH7 115.0 14.68 1.18 0.29 0.93 7.78 9.94 0.21 0.96115.0 12.88 1.18 0.38 0.98 10.11 1.72 0.38 0.97120.0 2.63 1.18 0.28 0.98 2.25 0.17 0.20 0.98120.0 2.71 1.18 0.29 0.97 1.80 1.70 0.26 0.97125.0 0.50 1.18 0.35 0.98 0.35 0.11 0.17 0.99125.0 0.44 1.18 0.23 0.99 0.33 0.12 0.22 0.99130.0 0.10 1.18 0.25 0.99 0.06 0.05 0.20 0.99130.0 0.11 1.18 0.37 0.98 0.06 0.11 0.21 0.99
McIlvaine pH5 115.0 8.72 1.25 0.34 0.98 5.76 2.63 0.16 0.99115.0 8.72 1.25 0.51 0.96 4.74 7.38 0.40 0.97115.0 9.60 1.25 0.50 0.97 7.10 0.00 0.27 0.99120.0 2.01 1.25 0.32 0.99 1.18 1.30 0.19 0.99125.0 0.44 1.25 0.22 0.99 0.31 0.09 0.12 >0.99125.0 0.35 1.25 0.45 0.97 0.17 0.32 0.18 0.99130.0 0.09 1.25 0.70 0.92 0.03 0.13 0.25 0.99130.0 0.06 1.25 0.29 0.97 0.04 0.02 0.45 0.97
McIlvaine pH3 115.0 3.30 1.19 0.27 0.99 2.91 0.00 0.22 0.99115.0 3.43 1.19 0.07 >0.99 3.49 0.00 0.55 0.98120.0 0.93 1.19 0.38 0.99 0.77 0.00 0.14 > 0.99120.0 1.05 1.19 0.35 0.98 0.81 0.09 0.34 0.99125.0 0.25 1.19 0.30 0.99 0.16 0.14 0.24 0.99125.0 0.21 1.19 0.53 0.98 0.11 0.21 0.20 >0.99130.0 0.02 1.19 0.29 0.98 0.01 0.02 0.20 0.99130.0 0.04 1.19 0.20 0.98 0.02 0.02 0.03 >0.99130.0 0.03 1.19 0.31 0.96 0.02 0.01 0.31 0.96
Courgette soup 115.0 14.27 1.35 0.31 0.98 8.01 6.89 0.19 0.98115.0 13.21 1.35 0.40 0.99 6.75 8.49 0.17 0.99115.0 13.90 1.35 0.14 >0.99 8.00 7.35 0.09 >0.99120.0 2.76 1.35 0.25 0.98 1.73 0.95 0.20 0.99120.0 2.97 1.35 0.18 0.97 1.54 1.90 0.15 0.98120.0 2.85 1.35 0.28 0.97 1.57 1.67 0.20 0.98125.0 0.54 1.35 0.13 >0.99 0.32 0.25 0.07 >0.99125.0 0.49 1.35 0.31 0.99 0.31 0.13 0.19 0.99
Table 2z-values of Bacillus sporothermodurans IC 4 spores obtained in different heatingmedia as derived from the Weibull and Geeraerd models.
Heating media Weibull model Geeraerd model
z (�C) p RMSE r2 z (�C) RMSE r2
McIlvaine pH7 7.01 1.18 0.04 >0.99 6.96 0.07 >0.99McIlvaine pH5 7.21 1.25 0.08 >0.99 6.84 0.12 0.99McIlvaine pH3 7.24 1.19 0.14 0.98 6.64 0.12 0.99Courgette soup 7.03 1.35 0.03 >0.99 7.24 0.04 >0.99
M.-D. Esteban et al. / Food Microbiology 34 (2013) 158e163160
application (Geeraerd et al., 2005). Since no tails were observed inthe survival curves, the log-linear þ shoulder model of Geeraerdwas used (Eqs. (4) and (5)).
dNdt
¼ �kmax ��
11þ Cc
�� N (4)
dCcdt
¼ �kmax � Cc (5)
Where N represents themicrobial cell density (cfu/mL), Cc is relatedto the physiological state of the cells (units/cell) and kmax denotesthe specific inactivation rate (1/min).
For the prediction of survivors under nonisothermal experi-ments, the dependence of kmax with respect to temperature wasdescribed with the Bigelow model (Eq. (6))
kmaxðTÞ ¼ ln10AsymDðTÞ ¼
ln10AsymDref
�exp�ln10z
��T�Tref
��(6)
where AsymD(T) and AsymDref are the asymptotic decimal reduc-tion times at the temperatures T and at the reference temperature(Tref) respectively.
2.3.3. Statistical analysisThe linear regressions of z values, the coefficients of determi-
nation (r2) and the root mean square error (RMSE) of these linearregressions were calculated using Windows Microsoft� Excel 2007.
The non-linear regressions of the Weibull model were adjustedusing the Solver tool for Excel. The non-linear regressions ofGeeraerd model were calculated using the GInaFIT add-inn(Geeraerd et al., 2005) for Excel 2007.
85
3. Results
3.1. Heat resistance of B. sporothermodurans under isothermalconditions
The presence of shoulders was very frequent in the survivalcurves of B. sporothermodurans. Fig. 1 shows, as an example, thesurvival curves obtained under isothermal conditions at 125 �C indifferent heating media.
Table 1 shows the heat resistance values, together with theRMSE and determination coefficients (r2), obtained in pH 3, 5 and 7McIlvaine buffer and in a courgette soup under isothermal condi-tions for B. sporothermodurans as derived from the Weibull andGeeraerd models.
A clear effect of the pH of the heatingmedium on heat resistancewas shown, just observing the parameters of the models directly(Table 1). For example, the D120 value decreased down to one thirdfrom pH 7 to pH 3 McIlvaine buffer, and a similar decrease wasobserved in the d120 value, from pH 7 to 3 (Table 1). Differences in
M.-D. Esteban et al. / Food Microbiology 34 (2013) 158e163 161
heat resistance were similar, regardless of the model used. The heatresistance in courgette soup was similar to that shown in pH 7McIlvaine buffer. Table 2 presents the z values in pH 3, 5 and 7McIlvaine buffer and in a courgette soup under isothermal condi-tions for B. sporothermodurans, as derived from the Weibull andGeeraerd’s models. No differences were found in z values obtainedin the different media, regardless of the model used, so the differ-ences in heat resistance related to the heating medium were keptalong all the temperature range studied.
110
112
114
116
118
120
122
124
126
0
1
2
3
4
5
6
7
0 5 10 15T
emp
erat
ure
(ºC
)
log
CF
U/m
L
Time (min)
110
112
114
116
118
120
122
124
126
0
1
2
3
4
5
6
7
0 5 10 15
Tem
per
atur
e (º
C)
log
CF
U/m
L
Time (min)
110
112
114
116
118
120
122
124
126
0
1
2
3
4
5
6
7
0 5 10 15
Tem
per
atur
e (º
C)
log
CF
U/m
L
Time (min)
110
112
114
116
118
120
122
124
126
0
1
2
3
4
5
6
7
0 5 10 15
Tem
per
atur
e (º
C)
log
CF
U/m
L
Time (min)
a)
b)
c)
d) h
g
Fig. 2. Survival curves of Bacillus sporothermodurans IC4 spores obtained in different heatininactivation lines for Weibull model (dashed lines) and Geeraerd model (dotted lines) and1 �C/min (b) pH5 McIlvaine buffer at 1 �C/min (c) pH3 McIlvaine buffer at 1 �C/min (d) courg10 �C/min (g) pH3 McIlvaine buffer at 10 �C/min (h) Courgette soup at 1 �C/min.
86
3.2. Heat resistance of B. sporothermodurans under nonisothermalconditions
The heat resistance values obtained with Weibull and Geeraerdmodels under isothermal conditions were used to predict thesurvival in the non-isothermal experiments at two different heat-ing rates, 1 and 10 �C/min, in pH 3, 5, 7 McIlvaine buffer and incourgette soup. Fig. 2 shows these survival curves together with theexpected inactivation derived from the isothermal heat resistance
110
115
120
125
130
135
0
1
2
3
4
5
6
7
0 0.5 1 1.5 2 2.5
Tem
per
atur
e (º
C)
log
CF
U/m
L
Time (min)
110
115
120
125
130
135
0
1
2
3
4
5
6
7
0 0.5 1 1.5 2 2.5
Tem
per
atur
e (º
C)
log
CF
U/m
L
Time (min)
110
115
120
125
130
135
0
1
2
3
4
5
6
7
0 0.5 1 1.5 2 2.5
Tem
per
atur
e (º
C)
log
CF
U/m
L
Time (min)
110
115
120
125
130
135
0
1
2
3
4
5
6
7
0 0.5 1 1.5 2 2.5
Tem
per
atur
e (º
C)
log
CF
U/m
L
Time (min)
e)
)
)
f)
g media and under different nonisothermal heating rates together with the expectedthe corresponding temperature profiles (continuous lines) (a) pH7 McIlvaine buffer atette soup at 1 �C/min (e) pH7 McIlvaine buffer at 10 �C/min (f) pH5 McIlvaine buffer at
Table 3Root mean square error (RMSE) obtained in the nonisothermal experiments whenpredicting the survivors with Weibull and Geeraerd models.
Heating/Cooling rate Weibull model Geeraerd model
McIlvaine pH7 1 �C/min 1.89 1.7110 �C/min 0.70 0.44
McIlvaine pH5 1 �C/min 0.96 0.6010 �C/min 1.20 1.13
McIlvaine pH3 1 �C/min 0.60 0.4910 �C/min 0.90 0.99
Courgette soup 1 �C/min 1.70 0.7810 �C/min 1.46 0.81
McIlvaine pH7 �1 �C/min 2.72 2.87�10 �C/min 0.76 0.68
M.-D. Esteban et al. / Food Microbiology 34 (2013) 158e163162
data for Weibull and Geeraerd models and the correspondingtemperature profiles. For the heating treatments, the initialtemperature was 110 �C.
In most cases, the predictions estimated the experimental dataquite accurately, both withWeibull and Geeraerdmodels. However,at pH 7 and 1 �C/min (Fig. 2a), microorganisms were more heatresistant than expected from the isothermal data.
Both models predicted similar lethality values, although Geer-aerdmodel predicted higher survival in all cases, being closer to theexperimental data in most cases.
Table 3 shows the goodness of fit of the predictions of the non-isothermal treatments to the experimental values in terms of RMSEvalues. In most cases Geeraerd’s model gave lower RMSE values,indicative of more accurate predictions.
Fig. 3 shows the survival curves of B. sporothermodurans obtainedunder nonisothermal cooling conditions at 1 �C/min (Fig. 3a) and at10 �C/min (Fig. 3b) in pH 7 McIlvaine buffer together with the ex-pected inactivation derived from the isothermal heat resistance dataforWeibull andGeeraerdmodels and the corresponding temperatureprofiles. For the cooling treatments, the initial temperatures were126 �C for the experiments at1 �C/minand130 �C for the experimentsat 10 �C/min. When exposed to cooling ramps, a rapid decline in thenumber of survivors was observed, followed by a long and persistenttail when the temperaturewas too low to inactivatemicroorganisms.
In these cases, the predictions only fitted the experimental dataquite accurately, both withWeibull and Geeraerdmodels, when thecooling ratewas of 10 �C/min (Fig. 3b).When the cooling ratewas of1 �C/min, the experimental values for survivorswerewell above thepredictions with both models.
4. Discussion
The effect of the heating medium on the heat resistance ofspore-forming bacteria is well known, at least under isothermal
110
112
114
116
118
120
122
124
126
128
0
1
2
3
4
5
6
7
0 5 10 15 20
Tem
per
atur
e (º
C)
log
CF
U/m
L
Time (min)
a) b
Fig. 3. Survival curves of Bacillus sporothermodurans IC4 spores obtained in pH7 McIlvainetogether with the expected inactivation lines for Weibull model (dashed lines) and Geeraer
87
heating conditions. López et al. (1996) showed the great influenceof the heating medium pH on the heat resistance of Bacillus stear-othermophilus, the D115 being increased in more than 20 timeswhen the pH decreased from 7 to 4. No statistical differences werefound in z values with increasing acidity. Similarly, Mafart andLeguerinel (1998) showed a clear interaction between tempera-ture and pH on the heat resistance of spores in all the microor-ganisms tested except for Clostridium botulinum. Our results are inagreement with all these, in the sense that lower pHs lead toa decrease in heat resistance. However, the effect of pH has beenscarce, at least compared to that found in other microorganisms,such as Bacillus licheniformis (Palop et al., 1996).
Regarding the composition of the heating medium, severalauthors (Condón and Sala, 1992; Stumbo, 1973) have found differ-ences in the heat resistance of spore-forming bacteria, which can beattributed only to the type of medium. The courgette soup had a pHof 6.3, so heat resistance values in between those shown at pH 5and pH 7 McIlvaine buffer could have been expected if the effect ofthe heating mediumwould have been only due to its pH. However,such heat resistance values were closer to those in pH 7 McIlvainebuffer, meaning that other characteristics of the heating medium,apart from its pH, have an influence on the heat resistance of thismicroorganism. Probably, the important lipid component presentin courgette soup could be responsible for a protective effect.
The presence of shoulders in the survival curves ofB. sporothermodurans IC4 spores corroborates previous studiesperformed with this same strain (van Zuijlen et al., 2010) andconfirms that is a common phenomenon in highly heat-resistantbacteria spores (Jagannath et al., 2005; Le Jean et al., 1994; Palopet al., 1999; Rodriguez et al., 1992).
Traditionally, linear models have been used to fit the survivalcurves. But, due to the presence of these shoulders, Van Zuijlenet al. (2010) already found that the linear model was not a goodchoice for this purpose. Instead, these authors found that two nonlog-linear models, Weibull and Geeraerd, fittedmore accurately thesurvival data. In this research, isothermal data in different heatingmedia were obtained and both models were compared with thepurpose of knowing which of them fitted better the data. Also, non-isothermal heating and cooling treatments were performed, andthe models were used to predict the surviving microorganisms.
According to both the RMSE and r2 values, Geeraerdmodel fittedthe isothermal survival curves better than the Weibull model(Table 1). A single p value was used to fit all survival curves per-formed in the same heating medium with the Weibull model. Thisprocedure slightly worsens the goodness of fit (Couvert et al.,2005). Since Geeraerd model was applied individually to eachsurvival curve, a better goodness of fit could be easily expectedunder isothermal conditions.
110
115
120
125
130
135
0
1
2
3
4
5
6
7
0 0.5 1 1.5 2 2.5
Tem
per
atur
e (º
C)
log
CF
U/m
L
Time (min)
)
buffer under different nonisothermal cooling rates at (a) 1 �C/min (b) and 10 �C/mind model (dotted lines) and the corresponding temperature profiles (continuous lines).
M.-D. Esteban et al. / Food Microbiology 34 (2013) 158e163 163
When B. sporothermodurans spores were exposed to non-isothermal treatments, a satisfactory goodness of fit was obtainedwith the predictions performed with both models for most of theheatingmedia andheating/cooling rates. This satisfactorygoodnessoffit points out, once more, the suitability of this microorganism forthermal process validation (van Zuijlen et al., 2010). The main differ-ences, between the predicted and experimental values, were found atpH 7 buffer and 1 �C/min heating and cooling rates (Figs. 2a and 3arespectively), where higher than expected survival data were found.Valdramidis et al. (2006) developed a dynamic model, based on theGeeraerd model, for Escherichia coli in which considered the adapta-tive response foundbetweenheating rate and survivals.Modificationsof the Weibull model that account for adaptation have been alsoproposed (Corradini and Peleg, 2009; Stasiewicz et al., 2008).
Bacterial spores are in a dormant state and no metabolicresponse is expected along with heating, however slight increasesin heat resistance have been found after sublethal heating (Herediaet al., 1997; Sedlak et al., 1993). In this sense, slow heating rates ata neutral pH could have lead to the higher than expected survivalfound. Geeraerd model showed a better goodness of fit, givingslightly lower RMSE values when compared with the Weibullmodel (Table 3).
WhenB. sporothermodurans IC4 sporeswere exposed to a coolingtreatment at a rate of 1 �C/min, a lower microbial inactivation thanwhat could be expected from isothermal experiments was found(Fig. 3). A short inactivation stage previous to the tail was shown.Probably, the damage accumulated in the firstminutes, inwhich thespores were exposed to higher temperatures, was not enough tocause the cellular death predicted afterwards. However, at a coolingrate of 10 �C/min, the expected inactivation took place (Fig. 3b).Perhaps the higher initial temperature used for this cooling rateexperiments (130 �C, in front of 126 �C for the 1 �C/min cooling rateexperiments) could explain this behaviour, since this temperature ismore lethal. When exposing E. coli vegetative cells to cooling rateexperiments, Conesa et al. (2009) found the expected inactivation atcooling rates of 2 �C/min but almost no lethal effects at 10 �C/min.Nevertheless, these authors used almost the same initial tempera-ture (62 and 62.5 �C respectively) in both cooling rate experiments.
These results show the suitability of non-linear models topredict the thermal resistance of spore-forming bacteria exposed tononisothermal treatments in different media. Modelling the heatresistance of spores by using non linear models has the advantageof taking into account not only several log reductions following firstorder kinetics but also, the initial shoulder. Hence, the use of simpleand robust non-linear models may have an interesting applicationfor the optimization of heat processes in the food industry.
Acknowledgements
This research was financially supported by the Ministry ofScience and Technology of the Spanish Government and EuropeanRegional Development Fund (ERDF) through Project AGL-2010-19775. M.D. Esteban is grateful to the Ministry of Science andTechnology for offering her the fellowship BES 2007-15471.
References
Brown,K.L., Ayres, C.A.,Gaze, J.E., Newman,M.E.,1984. Thermal destructionofbacterialspores immobilized in food/alginate particles. Food Microbiology 1, 187e198.
Chen, G., Campanella, O.H., Corvalan, C.M., 2007. A numerical algorithm for calcu-lating microbial survival curves during thermal processing. Food ResearchInternational 40, 203e208.
Condón, S., Sala, F.J., 1992. Heat resistance of Bacillus subtilis in buffer and foods ofdifferent pH. Journal of Food Protection 55, 605e608.
Conesa, R., Periago, P.M., Esnoz, A., López, A., Palop, A., 2003. Prediction of Bacillussubtilis spore survival after a combined nonisothermal-isothermal heat treat-ment. European Food Research and Technology 217, 319e324.
88
Conesa, R., Andreu, S., Fernández, P.S., Esnoz, A., Palop, A., 2009. Nonisothermal heatresistance determinations with the thermoresistometer Mastia. Journal ofApplied Microbiology 107, 506e513.
Coroller, L., Leguerinel, I., Mettler, E., Savy, N., Mafart, P., 2006. General model, basedon twoWeibull distributions of bacterial resistance, for describing various shapesof inactivation curves. Applied and Environmental Microbiology 72, 6493e6502.
Corradini, M.G., Peleg, M., 2009. Dynamic model of heat inactivation kinetics forbacterial adaptation. Applied and Environmental Microbiology 75, 2590e2597.
Couvert, O., Gaillarda, S., Savyb, N., Mafart, P., Leguerinel, I., 2005. Survival curves ofheated bacterial spores: effect of environmental factors on Weibull parameters.International Journal of Food Microbiology. 101, 73e81.
De Cordt, S., Vanhoof, K., Hu, J., Maesmans, G., Hendrickx, M., Tobback, P., 1992.Thermostability of soluble and immobilized a-amylase from Bacillus lichen-iformis. Biotechnology and Bioengineering 40, 396e402.
Etoa, F.-X., Michiels, L., 1988. Heat-induced resistance of Bacillus stearothermophilusspores. Letters in Applied Microbiology 6, 43e45.
Fernández, A., Ocio, M.J., Fernández, P.S., Rodrigo, M., Martínez, A., 1999. Applicationof nonlinear regression analysis to the estimation of kinetic parameters for twoenterotoxigenic strains of Bacillus cereus spores. FoodMicrobiology 16, 607e613.
Geeraerd, A.H., Herremans, C.H., Van Impe, J.F., 2000. Structural model require-ments to describe microbial inactivation during a mild heat treatment. Inter-national Journal of Food Microbiology 59, 185e209.
Geeraerd, A.H., Valdramidis, V.P., Van Impe, J.F., 2005. GInaFIT, a freeware tool toassess non-long-linear microbial survivor curves. International Journal of FoodMicrobiology 102, 95e105.
Hassani, M., Condón, S., Pagán, R., 2007. Predicting microbial heat inactivationunder nonisothermal treatments. Journal of Food Protection 70, 1457e1467.
Heredia, N.L., García, G.A., Luévanos, R., Labbé, R.G., García-Alvarado, J.S., 1997. Eleva-tion of the heat resistance of vegetative cells and spores of Clostridium perfringesType A by sublethal heat shock. Journal of Food Protection 60, 998e1000.
Huemer, I.A., Klijn, N., Vogelsang, H.W.J., Langeveld, L.P.M., 1998. Thermal deathkinetics of spores of Bacillus sporothermodurans isolated from UHT milk.International Dairy Journal 8, 851e855.
Jagannath, A., Tsuchido, T., Membré, J.M., 2005. Comparison of the thermal inacti-vation of Bacillus subtilis spores in foods using the modified Weibull andBigelow. Food Microbiology 22, 233e239.
Le Jean, G., Abraham, G., Debray, E., Candau, Y., Piar, G., 1994. Kinetics of thermaldestruction of Bacillus stearothermophilus spores using a two reaction model.Food Microbiology 11, 229e241.
López, M., González, I., Condón, S., Bernardo, A., 1996. Effect of pH heating mediumon the thermal resistance of Bacillus stearothermophilus spores. InternationalJournal of Food Microbiology 28, 405e410.
Mafart, P., Leguerinel, I.,1998.Modeling combined effects of temperature and pHonheatresistance of spores by a linear-Bigelow equation. Journal of Food Science 63, 6e8.
Mafart, P., Couvert, O., Gaillard, S., Leguerinel, I., 2002. On calculating sterility inthermal preservation methods: application of the Weibull frequency distribu-tion model. International Journal of Food Microbiology 72, 107e113.
Oomes, S., van Zuijlen, A., Hehenkamp, J., Brul, S., 2007. The caracterization ofBacillus spores occurring in the manufacturing of (low acid) canned products.International Journal of Food Microbiology 120, 85e94.
Palop, A., Raso, J., Pagán, R., Condón, S., Sala, F.J., 1996. Influence of pH on heatresistance of Bacillus licheniformis in buffer and homogenised foods. Interna-tional Journal of Food Microbiology 29, 1e10.
Palop, A., Mañas, P., Condón, S., 1999. Sporulation temperature and heat resistanceof Bacillus spores: a review. Journal of Food Safety 19, 57e72.
Peleg, M., Cole, M.B., 1998. Reinterpretation of microbial survival curves. CriticalReviews in Food Science and Nutrition 38, 353e380.
Peleg, M., Normand, M.D., 2004. Calculating microbial survival parameters andpredicting survival curves from non-isothermal inactivation data. CriticalReviews in Food Science and Nutrition 44, 409e418.
Periago, P.M., Leontidis, S., Fernández, P.S., Rodrigo, C., Martínez, A., 1998. Kineticparameters of Bacillus stearothermophilus spores under isothermal and non-isothermal heating condition. Food Science and Technology International 4,443e447.
Rodriguez, A.C., Smerage, G.H., Teixeira, A.A., Lindsay, J.A., Busta, F.F., 1992. Pop-ulation model of bacterial spores for validation of dynamic thermal processes.Journal of Food Process Engineering 15, 1e30.
Sedlák, M., Vinter, V., Adamec, J., Vohradský, J., Voburka, Z., Chaloupka, J., 1993. Heatshock applied early in sporulation affects heat resistance of Bacillus megateriumspores. Journal of Bacteriology 175, 8049e8052.
Stasiewicz, M.J., Marks, B.P., Orta-Ramírez, A., Smith, D.M., 2008. Modelling theeffect of prior sublethal thermal history on the thermal inactivation rate ofSalmonella in ground turkey. Journal of Food Protection 71, 279e285.
Stumbo, C.R., 1973. Thermocacteriology in Food Processing, second ed. AcademicPress, London, New York.
Valdramidis, V.P., Geeraerd, A.H., Bernaerts, K., Van Impe, J.F., 2006. Microbialdynamics versus mathematical model dynamics: the case of microbial heatresistance induction. Innovative Food Science & Emerging Technologies 7, 80e87.
Valdramidis, V.P., Geeraerd, A.H., Bernaerts, K., Van Impe, J.F., 2008. Identification ofnon-linear microbial inactivation kinetics under dynamic conditions. Interna-tional Journal of Food Microbiology 128, 146e152.
Van Zuijlen, A., Periago, P.M., Amézquita, A., Palop, A., Brul, S., Fernández, P.S., 2010.Characterization of Bacillus sporothermodurans IC4 spores; putative indicatormicroorganism for optimization of thermal processes in food sterilization. FoodResearch International 43, 1895e1901.
5.2. CAPITULO II: “Efecto del timol en el medio de
calentamiento y de recuperación sobre la resistencia al calor
de esporos de Bacillus en condiciones isotérmicas y no
isotérmicas”
Este capítulo se corresponde con el siguiente artículo, que está siendo sometido a
revisión en la revista Food Microbiology:
Esteban, M.-D., Conesa, R., Huertas, J.P. y Palop, A. Effect of thymol in heating and
recovery media on the isothermal and non-isothermal heat resistance of Bacillus spores.
Food Microbiology, enviado (ref. FM-S-14-00136)
Las empresas agroalimentarias aplican tradicionalmente un sobreprocesado a los
productos tratados térmicamente, garantizando de esta forma su seguridad y estabilidad
microbiológica. Lamentablemente, esto conlleva un detrimento de las características
organolépticas y nutricionales. Existen distintas estrategias para tratar de reducir la
intensidad de los tratamientos térmicos. La acidificación de los alimentos previo a su
tratamiento térmico e aplica de manera habitual en la industria alimentaria con este
objetivo. Su efecto sobre numerosos microorganismos esporulados se conoce desde
hace tiempo y en el capítulo anterior se exploró sobre B. sporothermodurans. También
se investigó el efecto de otro factor menos conocido, como la velocidad de
calentamiento, en este mismo microorganismo, si bien en el rango investigado (entre 1 y
10°C/min) no se observó ningún efecto significativo. Otra estrategia consiste en la
adición de determinados compuestos de carácter antimicrobiano, cuyo efecto
combinado con el calor reduzca notablemente la resistencia microbiana.
Para este estudio se eligió un antimicrobiano natural, el timol. Este tipo de
compuestos goza de la confianza de los consumidores, dado su carácter natural.
Basándonos en estudios previos de Lekogo et al. (2010), en los que la adición de ácidos
grasos mostraba un efecto distinto sobre los microorganismos si se realizaba en el
medio de calentamiento o en el de recuperación, en nuestro trabajo, la adición de timol
se hizo también en ambos medios. El estudio se realizó en condiciones isotérmicas
sobre distintos microorganismos esporulados y, en uno de ellos, se amplió también a
condiciones no isotérmicas.
Los resultados obtenidos mostraron un efecto discreto o nulo, dependiendo del
microorganismo, cuando el timol se adicionada al medio de calentamiento, y mucho
más notable cuando se añadía al medio de recuperación. En el caso del medio de
recuperación el efecto era, además, dosis-dependiente, lo que permitió la elaboración de
modelos secundarios para todos los microrganismos investigados. La adición
simultánea a ambos medios no mostró efectos significativos. Sin embargo, al combinar
el timol con tratamientos no isotérmicos el número de supervivientes fue
significativamente inferior a lo predicho por los modelos.
Estos resultados, en su conjunto, indican que la combinación de timol con calor
permitiría reducir la intensidad de los tratamientos térmicos, manteniendo los mismos
niveles de seguridad y estabilidad alimentaria.
91
Submited for publication
Effect of thymol in heating and recovery media on the isothermal and non-
isothermal heat resistance of Bacillus spores
Maria-Dolores Esteban, Raquel Conesa, Juan-Pablo Huertas and Alfredo Palop*
Departamento de Ingeniería de Alimentos y del Equipamiento Agrícola, Campus de Excelencia
Internacional Regional "Campus Mare Nostrum", Universidad Politécnica de Cartagena, Paseo Alfonso
XIII 48, 30203 Cartagena, Murcia, Spain
ABSTRACT
Members of the genus Bacillus include important food-borne pathogen and spoilage
microorganisms for in food industry. Essential oils are natural products extracted from herbs
and spices, which can be used as natural preservatives in many foods because of their
antibacterial, antifungal, antioxidant and anti-carcinogenic properties. The aim of this research
was to explore the effect of the addition of different concentrations of thymol to the heating and
recovery media on the thermal resistance of spores of Bacillus cereus, B. licheniformis and B.
subtilis. Experiments were performed at isothermal and non-isothermal heating conditions.
While the heat resistance was hardly reduced when thymol was present in the heating medium,
the effect in the recovery medium was greater and could be predicted using simple mathematical
models.
1. Introduction
Bacillus are Gram-positive and spore-
forming bacteria. Bacterial spores are the
main problem in many food industries not
only for their ubiquitous nature, but also
because of their ability to survive, in some
instances, to the industrial sterilisation
processes and, what is more, to proliferate
under conditions generally presumed to
prevent growth (such as low temperatures)
(Scheldeman et al., 2006). Over-processing
is often applied to the products that have a
prolonged shelf life, being detrimental for
their quality. Even though, in recent years,
highly heat resistant spore-forming bacteria
have increased challenges in industrial
sterilisation processes to assure food safety
and prevent spoilage (Oomes et al., 2007).
Combined processes have been
developed in order to ensure microbial
safety, affecting to a lesser extent the
sensorial and nutritional properties.
Different studies have shown the
antimicrobial efficacy of essential oils,
alone or in combination with other
preservation methods, against spoilage and
food-borne pathogens (Ultee et al., 2000;
Tiwari et al., 2009; Esteban and Palop,
2011; Huertas et al., 2014).
Essential oils are natural products
extracted from herbs and spices used as
flavourings in the food industry. Nowadays
their use as natural preservatives in many
foods is gaining interest because of their
antibacterial, antifungal, antioxidant and
anti-carcinogenic properties. Thymol is a
phenolic compound present in the essential
oil fraction of Oreganum and Thymus
plants. The addition of thymol to the foods
that are going to be heat treated could
reduce processing times and temperatures
considerably. The thermal resistance of
spores is strongly influenced by the heating
and recovery conditions (Gonzalez et al.,
1996; Coroller et al., 2001, Lekogo et al.,
2010; Esteban et al., 2013). A better
knowledge of the effect of the preservation
agents in the heating and recovery media on
microorganisms would lead to a more
rational design of thermal processes. In this
regard, no research on the effect of the
combination of preservation agents and heat
under non-isothermal conditions has been
92
conducted yet.
The aim of this study was double, on one
hand to know and model the influence of
different concentrations of thymol in the
heating and in the recovery media on the
heat resistance of B. cereus, B.
licheniformis and B. subtilis spores and, on
the other hand, to explore the effect of
thymol in both media under non-isothermal
heating conditions on B. subtilis spores.
2. Material and methods
2.1. Bacterial strains and culture
conditions
The strains used in this study were
Bacillus cereus INRA ATZ421 (kindly
supplied by Institut National de la
Recherche Agronomique), Bacillus
licheniformis CECT 4525 and Bacillus
subtilis CECT 4071 (both supplied by the
Spanish Type Culture Collection) and
Bacillus subtilis AdHC1 (kindly supplied
by Unilever Bestfoods Research
Vlaardingen). All the strains were prepared
on Petri dishes of plate count agar (PCA;
Scharlau Chemie, Barcelona, Spain). The
agar surface was inoculated with 0.2 mL of
a 24 h culture grown in brain heart infusion
broth (BHIB; Scharlau Chemie) at 37ºC.
The agar plates were incubated at 37ºC for
sporulation. For all microorganisms, once
90% sporulation was achieved, as
determined by phase contrast microscopy
(Leica, Wetzlar, Germany), spores were
collected by flooding the agar plate with
sterile distilled water, scratching the surface
with a spatula. After harvesting, spores
were washed four times by centrifugation
and resuspended in sterile, distilled water.
The concentration of spores in the final
suspension was adjusted at 109 spores mL-1
with sterile distilled water. The spore
suspensions were stored at 4ºC until used.
2.2 Chemicals
Thymol (Sigma-Aldrich Chemie,
Steinheim, Germany) stock solutions 0.5 M
were made in 95 % ethanol and stored at 4
°C.
2.3 Heat treatment
Heat resistance determinations were
carried out in a thermoresistometer Mastia
(Conesa et al., 2009). The D values were
determined in BHIB at temperatures of 100,
105 and 110ºC for isothermal treatments.
For non-isothermal treatments the
thermorresistometer was programmed to
perform a linear temperature profile,
starting from an initial temperature of 95ºC
at a constant heating rate of 1ºC min-1.
Different concentrations of thymol (0, 0.1,
0.2, 0.3, 0.4, 0.5 and 0.6 mM) were added
to the heating medium, BHIB, and/or to the
recovery medium, Brain Heat Infusion Agar
(BHIA; Scharlau Chemie). Survival
counting was based on duplicate counts,
from appropriate dilutions in peptone water
(Scharlau Chemie), plated in BHIA and
incubated at 37 ºC for 24 h. Preliminary
experiments showed that longer incubation
times did not modify plate counts.
2.4. Data analysis
Lineal survival curves were found for all
microorganisms tested. D values were
estimated from the survival curves as the
negative inverse of the slope. z values were
estimated from the decimal reduction time
curves (DRTCs) as the negative inverse of
the slope. All resistance determinations
were performed at least twice in
independent experiments at different days.
Average D values and their associated
standard deviation were calculated for each
microorganism, thymol concentration and
temperature. Differences between data were
considered significant when p ≤ 0.05.
The effect of the different concentrations of
thymol in the recovery media on the D
values was modeled by a secondary model
based on the model of Lekogo et al. (2010).
(1)
Where z’thymol is the increase of thymol
concentration in the recovery media that
lead a 10-fold reduction in the D value and
D* is the D-value without thymol in the
recovery media.
93
For non-isothermal treatments,
experimental data were contrasted against
survivor numbers predicted from D and z
values obtained under isothermal conditions
(Conesa et al., 2009). Predictions were
based on the integration of heat treatment
lethality, which was calculated applying the
general method of process calculation
(Stumbo, 1973) by means of Eq. (2).
FTRz = 10((T – TR) / z) t (2)
where FTRz is the time of treatment (min) at
the reference temperature TR for a
microorganism with a specific z value (ºC);
t is the time interval at which the
temperature T is assumed to be constant.
The time intervals (t) were of 6 s. In this
way, temperature always changed 0.1ºC in
consecutive time intervals.
The total time of treatment, FTRz, is then
substituted in Eq. (3) to predict the
number of survivors.
FTRz = DR (log N0 – log N) (3)
where DR is the decimal reduction time at
TR (min); N0 is the initial number of
microorganisms; N is the number of
survivors.
The parameter values and their
associated standard deviation were
calculated by an appropriate statistical
package (Matlab, The Math Works,
Natick, USA).
3. Results
The addition of thymol to the heating
medium had a rather small effect on the
thermal resistance of all the
microorganisms tested (Fig. 1). The D100ºC
value decreased from 2.86 to 2.06 min in
the case of B. licheniformis when 0.5 mM
thymol was added to the heating medium.
Similar or even lower decreases were found
for the other microorganisms (Fig. 1). The
presence of thymol in the recovery media
had a greater effect on all the
microorganisms, reducing their D100 values
even down to one third for B. cereus and B.
-4
-3
-2
-1
0
0 2 4 6 8Time (min)
Lo
g N
/N 0
b)
-4
-3
-2
-1
0
0 5 10 15
Time (min)
Lo
g N
/N 0
c)
-4
-3
-2
-1
0
0 5 10 15Time (min)
Lo
g N
/N 0
a)
-4
-3
-2
-1
0
0 2 4 6 8Time (min)
Lo
g N
/N 0
d)
Figure 1. Survival curves of Bacillus cereus (a), Bacillus licheniformis (b), Bacillus subtilis AdHC1
(c) and Bacillus subtilis CECT 4071 spores (d) heated to 100ºC and exposed to 0.5mM thymol in
heating and recovery media. ● control; ■ 0.5 mM thymol in the heating medium; □ 0.5 mM thymol
in the recovery medium.
94
subtilis CECT 4071 when 0.5 mM thymol
was added to the recovery medium (Figure
1a and 1d respectively).
When increasing concentrations of thymol
were added to the recovery medium after
the thermal treatment, increasing effects
were shown. Dose dependent effects were
found at 100ºC for all the microorganisms
through all the range of thymol
concentrations tested (Table 1), with linear
correlations between the log D values and
the concentration of thymol in the recovery
medium (r ≥ 0.92).
The data on the effect of antimicrobials in
the recovery medium were used to build
mathematical models to predict the
influence of thymol. These models were
based on the equation proposed by Lekogo
et al. (2010) (Eq. 1). The z’thymol values
(Table 2) are the
concentrations of thymol in the recovery
medium necessary to reduce the D value to
one tenth for each microorganism
respectively. These predictive models were
reliable through all thymol concentrations
tested at a heating temperature of 100ºC. The effect of the thymol concentration in
the recovery medium was also observed at
other heating temperatures for all
microorganisms. Fig. 2 shows, as an
example, the survival curves of B. subtilis
AdHC1 at 105ºC.
Fig. 3 shows the combined effect of 0.3
mM thymol in the heating and recovery
media for B. licheniformis and B. subtilis
CECT 4071. The D values obtained when
thymol was added only to the recovery
medium were no significantly different to
those obtained when thymol was added to
both the recovery and heating media, for
both microorganisms. Hence, the addition
of thymol in both the heating and the
recovery media did not lead to any
synergistic effect.
Table 1. D values (min) standard deviation for Bacillus cereus, Bacillus licheniformis Bacillus
subtilis AdHC1 and Bacillus subtilis CECT 4071 heated at 100ºC with thymol in the recovery
medium.
Thymol
concentration
(mM)
B. cereus B. licheniformis B. subtilis AdHC1 B. subtilis CECT 4071
D100 (min) ± SD D100 (min) ± SD D100 (min) ± SD D100 (min) ± SD
0.0 4.95 ± 0.15 2.86 ± 0.78 4.04 ± 0.66 2.56 ± 0.54
0.1 4.48 ± 0216 2.23 ± 0.57 N.D. 2.29 ± 0.29
0.2 N.D. 2.09 ± 0.28 N.D. 1.87 ± 0.15
0.3 1.64 ± 0.29 1.78 ± 0.64 3.74 ± 0.88 1.53 ± 0.09
0.4 N.D. N.D. 3.29 ± 0.88 1.03 ± 0.21
0.5 1.50 ± 0.14 1.76 ± 0.44 2.65 ± 0.84 0.84 ± 0.22
0.6 N.D. 1.36 ± 0.77 2.39 ± 0.75 0.71 ± 0.36
N.D.: Not determined
z’thymol r
B. cereus 0.86 0.94
B. licheniformis 1.88 0.95
B. subtilis AdHC1 3.14 0.92
B. subtilis CECT 4071 1.09 0.99
Table 2. z’thymol values for Bacillus cereus,
Bacillus licheniformis, Bacillus subtilis
AdHC1 and Bacillus subtilis CECT 4071 at
100ºC.
-4
-3
-2
-1
0
0 1 2 3
Time (min)
Log N
/N 0
Figure 2. Survival curves of Bacillus subtilis
AdHC1 spores heated to 105ºC with thymol in
heating and recovery media. ● control; ■ 0.5 mM
thymol in the heating medium; □ 0.5 mM thymol
in the recovery medium.
95
Figure 4 shows the effect of thymol in
nonisothermal heat treatments (at a constant
heating rate of 1ºC/min) in B. subtilis
AdHC1 survival curves, the corresponding
temperature profiles and the predictions of
the survivors based on isothermal data. As
in the isothermal treatments the effect of 0.5
mM of thymol in the heating media had no
effect on the microorganisms. Both the
control and the 0.5 mM thymol survival
curves showed the same profile, reducing
the counts in 4 log cycles after 9 min of
treatment, when the treatment temperature
had reached 104ºC. When the same amount
of thymol was added to the recovery
medium the effect was greater again,
reducing considerably de number of
survivors. In this case, almost the same log
reductions were reached in 6 min.
According to the predictions (from
isothermal data), the control and the heating
medium survival curves were quite
accurate, while the recovery medium
prediction curve was overestimating the
number of survivors.
-5
-4
-3
-2
-1
0
0 2 4 6 8 10
Time (min)
Lo
g N
/N 0
95
97
99
101
103
105
Tem
per
atu
re (
ºC)1
4. DISCUSSION
4. Discussion
The influence of different concentrations of
thymol in the heating and in the recovery
media on the heat resistance of different
strains of Bacillus spores was studied.
These microorganisms have been shown to
survive to very high temperatures of
treatment and to other stressing conditions
or treatments, such as low temperature or
pH (André et al., 2013). Hence, the addition
natural antimicrobial compounds could help
to decrease the intensity of the thermal
treatment and to improve the food quality.
The effect of the addition of thymol was
different in the heating and in the recovery
Figure 3. Survival curves of Bacillus
licheniformis (a) and Bacillus subtilis CECT
4071 spores (b) heated to 100ºC and exposed to
0.5mM thymol in heating and/or the recovery
media. ● control; ■ 0.5 mM thymol in the
heating medium; □ 0.5 mM thymol in the
recovery medium.
Figure 4. Survival curves of Bacillus subtilis AdHC1
under 1ºC/min nonisothermal heating rate with thymol
in the heating and recovery media. ● control; ■ 0.5
mM thymol in the heating medium; □ 0.5 mM thymol
in the recovery medium; dotted line: temperature
profile; continuous line: predicted microbial
inactivation for control and thymol in the heating
medium; dashed line: predicted microbial inactivation
for thymol in the recovery medium.
96
media. Thymol showed a scarce when
added to the heating medium, at
concentrations up to 0.5 mM for any of the
microorganisms studied at 100ºC (Fig. 1).
Similar low effects have been found by
other authors when adding antimicrobial
compounds to the heating medium
(Tremoulet et al., 2002; Lekogo et al.,
2010; Ungaretti et al., 2012). However,
when thymol was added to the recovery
medium, dose dependent effects were
observed for all the microorganisms (Table
1). The D100ºC value was reduced down to
one third when 0.5 mM thymol was added
to the recovery medium for B. cereus and B.
subtilis CECT 4071. These effects were
also observed at other heating temperatures
(Fig. 2). Other authors have found similar
effects when adding different compounds to
the heating and the recovery media.
Leguerinel and Mafart (2001) found the
same effect for B. cereus with free fatty
acids. Also, Lekogo et al. (2010) found
similar effects for several spore-formers,
and Huertas et al. (2013) found similar
effects for Alicyclobacillus acidoterrestris
with combinations of nisin and citral.
Thymol is a phenolic compound present in
the essential oil fraction of many aromatic
herbs and spices. According to its
hydrophobic nature, its primary site of
toxicity is the cytoplasmic membrane
(Juven et al., 1994; Helander et al., 1998;
Lambert et al., 2001), increasing its
permeability. It also decreases the activity
of several enzymatic systems (Nychas,
1995). Bacterial spores are protected
against chemicals agents because of their
envelopes. Hence, no effect of the
antimicrobials added to the heating medium
is to be expected. However outgrowing
spores are even more susceptible to
antimicrobials than vegetative cells
(Setlow, 2006). This increased sensitivity
would explain the effect found in the
recovery medium.
Lekogo et al. (2010) found a relationship
between the concentration of different fatty
acids in the recovery medium and decrease
in heat resistance, which enabled them to
describe this effect on B. cereus and
Clostridium sporogenes. These authors
developed a predictive model, using the z
concept based on a Bigelow-like model as a
secondary model, to describe the effect of
the fatty acid concentration. This model
was also valid for thymol added to the
recovery medium for all the
microorganisms in this research (Table 2).
The z’thymol concept helps to quantify the
effect of thymol concentration on the
apparent heat resistance of these
microorganisms, and to sort their sensitivity
to this compound. In this sense, B. cereus
was the most sensitive microorganism
(lower z’thymol value) and B. subtilis AdHC1
the most resistant one.
During thermal treatments applied currently
in the food industry, the composition of
heating and recovery media are identical.
Although no significant effect on the
thermal resistance was found when thymol
was added to the heating medium,
experiments were performed to explore the
combined effect of thymol in both the
heating and the recovery media. No further
decrease in the heat resistance was observed
when thymol was present in both media
(Fig. 3). These results are in disagreement
with those of Lekogo et al. (2010), who
found cumulative effects when free fatty
acids were added to heating and recovery
media. However, these authors did find that
free fatty acids enhanced thermal
inactivation of bacterial spores, when
present in the heating medium.
Under non isothermal heating conditions,
the absence of effect of thymol added to the
heating medium was also observed on the
thermal resistance of B. subtilis AdHC1
spores. The survivors of this thermal
treatment (Fig. 4) were accurately predicted
using the data obtained under isothermal
conditions. The addition of thymol to the
recovery medium lead to a remarkable
synergistic effect, since the survivors found
were even lower than those expected from
the isothermal data. No data have been
found in literature reporting the effect of
antimicrobials under non isothermal heating
conditions to which our results can be
compared. This finding may have
interesting applications for the food
processing industry, since a combination of
antimicrobials with a non isothermal
97
treatment (as those currently applied) would
enhance the inactivation of bacterial spores.
5. Conclusions
It has been shown that thymol helps to
reduce the thermal resistance of different
spore-formers, including the food-borne
pathogen B. cereus. The effect on the
resistance to heat of the presence of this
antimicrobial in the recovery medium is
dose dependent and can be predicted using
simple mathematical models. The
combination of antimicrobials with thermal
treatments could be of interest for the food
processing industry, since it would help to
decrease the intensity of thermal treatments,
while keeping the same levels of food
safety and stability.
Acknowledgements
This research was financially supported
by the Ministry of Science and Technology
of the Spanish Government and European
Regional Development Fund (ERDF)
through Projects AGL-2006-10280 and
AGL-2010-19775. M.D. Esteban is grateful
to the Ministry of Science and Technology
for offering her the fellowship BES 2007–
15471.
References
André, S., Zuber, F., Remize, F. 2013.
Thermophilic spore-forming bacteria
isolated from spoiled canned food and
their heat resistance. Results of a French
ten-year survey. International Journal of
Food Microbiology 165, 134-143.
Conesa, R., Andreu, S., Fernández, P.S.,
Esnoz, A., Palop, A. 2009.
Nonisothermal heat resistance
determinations with the
thermoresistometer Mastia. Journal of
Applied Microbiology 107, 506–513.
Coroller, L., Leguerinel, I., Mafart, P.
2001. Effect of water activities of
heating and recovery media on apparent
heat resistance of Bacillus cereus spores.
Applied and Environmental
Microbiology 31, 341-347.
Esteban, M.D., Palop, A. 2011. Nisin,
carvacrol and their combinations against
the growth of heat-treated Listeria
monocytogenes cells. Food Technology
and Biotechnology 49, 89-95.
Esteban, M.D., Huertas, J.P., Fernández, P.,
Palop, A. 2013. Effect of the medium
characteristics and the heating and
cooling rates on the nonisothermal heat
resistance of Bacillus
sporothermodurans IC4 spores. Food
Microbiology 34, 158-163.
González, I., López, M., Mazas, M.,
Bernardo, A., Martín R. 1996. Effect of
pH of the recovery medium on the
apparent heat resistance of three strains
of Bacillus cereus. International Journal
of Food Microbiology 31, 341-347.
Helander, I.M., Alakomi, H.L., Kyösti,
L.K., Mattila-Sandholm, T., Pol, I.E.,
Smid, E.J., Gorris, L.G.M., von Wright,
A. 1998. Characterisation of the action
of selected essential oil components on
Gram-negative bacteria. Journal of
Agriculture and Food Chemistry 46,
3590-3595.
Huertas, J.P., Esteban, M.D., Antolinos, V.,
Palop, A. 2014. Combined effect of
natural antimicrobials and thermal
treatments on Alicyclobacillus
acidoterrestris spores. Food Control 35,
73-78.
Juven, B.J., Kanner, J., Schved, F.,
Weisslowicz, H. 1994. Factors that
interact with the antibacterial action of
thyme essential oil and its active
constituent. Journal of Applied
Bacteriology 76, 626-631.
Lambert, R.J.W., Skandamis, P.N., Coote,
P.J., Nychas, G.J.E. 2001. A study of the
minimum inhibitory concentration and
mode of action of oregano essential oil,
thymol and carvacrol. Journal of
Applied Microbiology 91, 453-462.
Leguerinel, I., Mafart, P. 2001. Modelling
the influence of pH and organic acid
types on thermal inactivation of Bacillus
cereus spores. International Journal of
Food Microbiology 63, 29-34.
Lekogo, B.M., Coroller, L., Mathot, A.G.,
Mafart, P., Leguerinel, I. 2010.
98
Modelling the influence of palmitic,
palmitoleic, stearic and oleic acids on
apparent heat resistance of spores of
Bacillus cereus NTCC 11145 and
Clostridium sporogenes Pasteur 79.3.
International Journal of Food
Microbiology 141, 242-247.
Nychas, G.J.E. 1995. Natural antimicrobials
from plants. In: Gould, G.W. (ed.), New
methods of food preservation. London:
Blackie Academic Professional. pp. 58-
89.
Oomes, S., van Zuijlen, A., Hehenkamp, J.,
Brul, S. 2007. The characterization of
Bacillus spores occurring in the
manufacturing of (low acid) canned
products.
International Journal of Food
Microbiology 120, 85-94.
Scheldeman, P., Herman, L., Foster, S.,
Heyndrickx, M. 2006. Bacillus
sporothermodurans and other highly
heat-resistant spore formers in milk.
Journal of Applied Microbiology 101,
542-555.
Setlow, P. 2006. Spores of Bacillus subtilis:
their resistance to and killing by
radiation, heat and chemicals. Journal of
Applied Microbiology 101, 514-525.
Stumbo, C.R. 1973. Thermocacteriology in
food processing. (2nd ed.). Academic
Press, London, New York.
Tiwari, B.K., Valdramidis, V.P.,
O’Donnell, C.P., Muthukumarappan, K.,
Bourke, P., Cullen P.J. 2009.
Application of natural antimicrobials for
food preservation. Journal of
Agricultural and Food
Chemistry 57, 5987–6000.
Tremoulet, F., Rabier, P., Gas, G. 2002.
Inhibition of Bacillus
stearothermophilus spores in liquid
medium by free fatty acids with and
without heat: possible mechanism for
the microbiological stability of canned
fat-duck liver. Journal of Food Science
67, 1144–1148.
Ultee, A., Kets, E.P.W., Alberda, M.,
Hoekstra, F.A., Smid, E.J. 2000.
Adaptation of the food-borne pathogen
Bacillus cereus to carvacrol. Archives of
Microbiology 174, 233-238.
Ungaretti, L., da Silva, C.A., Martins, B.C.,
Falcão G.M. 2012. Bacillus coagulans
spore inactivation through the
application of oregano essential oil and
heat. LWT - Food Science and
Technology 46, 267-273.
99
5.3. CAPITULO III: “Nisina carvacrol y sus combinaciones
en el crecimiento de células de Listeria monocytogenes
tratadas termicamente.”
Este capítulo se corresponde con el siguiente artículo, publicado en la revista Food
Technology and Biotechnology:
Esteban, M.-D., y Palop, A. Nisin, carvacrol and their combinations against the growth
of heat-treated Listeria monocytogenes cells. Food Technology and Biotechnology, 49:
89–95 (2011)
En función del tipo de microorganismo que queramos controlar, los tratamientos
térmicos aplicados en la industria alimentaria son: pasterización y esterilización. Hasta
ahora, en el desarrollo de esta tesis doctoral se han tratado los tratamientos de
esterilización y los problemas relacionados con ellos, planteándose distintas alternativas
para tratar de disminuir la intensidad de los mismos. Una de estas alternativas consistía
en combinar los tratamientos térmicos con los antimicrobianos naturales. En este
capítulo se planteó una estrategia similar sobre células vegetativas de bacterias Gram
positivas. No obstante, en el caso de las bacterias vegetativas, se dispone ya de
abundante información previa sobre el efecto de distintos antimicrobianos, incluso
combinados con calor. Por ejemplo, en nuestro mismo laboratorio abordamos hace ya
algunos años el estudio del efecto combinado de distintos antimicrobianos naturales
sobre la viabilidad de células vegetativas de B. cereus sometidas a un calentamiento
subletal previo (Periago et al., 2001). Por todos estos motivos, el planteamiento del
presente estudio consistía en explorar como afectaba al crecimiento de los
supervivientes a un tratamiento térmico de otro microorganismo de interés sanitario, L.
monocytogenes, la combinación de dos antimicrobianos naturales, nisina y caracol. Se
trata de una situación que podría darse en la industria alimentaria, por lo que la
investigación, además de realizarse en un medio de cultivo, también se extendió a un
alimento.
Los resultados mostraron unos efectos sinérgicos interesantes cuando se combinaron
los dos compuestos antimicrobianos con el tratamiento térmico previo. Además, estos
efectos se mantenían incluso en la matriz alimentaria.
102
ISSN 1330-9862 original scientific paper
(FTB-2305)
Nisin, Carvacrol and Their Combinations Against the
Growth of Heat-Treated Listeria monocytogenes Cells
María-Dolores Esteban and Alfredo Palop*
Department of Food Engineering and Agricultural Machinery,Technical University of Cartagena, Paseo Alfonso XIII 48, ES-30203 Cartagena, Murcia, Spain
Received: June 17, 2009Accepted: April 23, 2010
Summary
Listeria monocytogenes is a Gram-positive microorganism responsible for one of themost serious food-borne diseases in the world, listeriosis. The aim of this study is to eva-luate the combined effect of a heat pretreatment with the use of antimicrobials, nisin andcarvacrol, on the growth of L. monocytogenes, and their potential uses as food preserva-tives. Carvacrol showed a dose-dependent inhibitory effect, while nisin did not, it decreas-ed the growth rate of L. monocytogenes up to 20 %, and it increased lag time for approx. 25% at any of the concentrations tested (0.13–0.39 mM). When both antimicrobials were com-bined, a synergistic effect was observed. This effect was further increased when they werecombined with a heat pretreatment for 15 min at 55 °C, where no growth was observedfor at least 15 days, even at the lowest concentration tested. The effect was proved both intryptic soy broth and in carrot juice. This study indicates the potential use of carvacrol andnisin applied simultaneously for preservation of minimally processed foods.
Key words: nisin, carvacrol, Listeria monocytogenes, combined antimicrobial processes
Introduction
Listeria monocytogenes has become one of the mostimportant foodborne pathogens in the last 20 years (1).Several foodborne disease outbreaks, which have causedsevere and often fatal infections in susceptible humanhosts, have been linked to this pathogen (2).
Listeria can be inactivated by exposure to a varietyof food processing treatments including heating at hightemperatures, freezing and exposure to acids or sanitiz-ing compounds, but also it may survive adverse condi-tions, such as vacuum, ultraviolet rays and conventionalpasteurisation (3). Heat inactivation is one of the mostfrequently used preservation techniques to extend theshelf life of food products. Lately, an increased interestin mild heat treatments is observed because of the in-creased market demand for minimally processed food.L. monocytogenes is one of the most heat-resistant non--sporeforming pathogenic microorganisms present in food(4).
Lactic acid bacteria produce a wide range of antimi-crobial substances including bactericidal peptides knownas bacteriocins. Nisin, produced by Lactococcus lactis ssp.lactis, can have bactericidal effects against a broad rangeof Gram-positive bacteria including some lactic acid bacte-ria, L. monocytogenes and spore-forming bacteria like Clostri-dium and Bacillus species (5,6). Nisin inhibits the outgrowthof germinating spores and causes lysis of vegetative cells(7). Its primary target is the cytoplasmic membrane ofvegetative cells. Nisin permeabilizes the cytoplasmic mem-brane by forming pores in the membrane, resulting in arapid efflux of small molecules (8–10). Pore formationcaused by this cationic lantibiotic involves the local per-turbation of the bilayer structure and a membrane po-tential-dependent or pH gradient-dependent reorientationof these molecules from a surface-bound into a mem-brane-inserted configuration (5,11,12). The efflux of cel-lular constituents results in a complete collapse of theproton motive force (8,13–15). Nisin is Generally Recog-nized As Safe (GRAS status), it is the only bacteriocin
89M.D. ESTEBAN and A. PALOP: Effect of Nisin and Carvacrol on L. monocytogenes, Food Technol. Biotechnol. 49 (1) 89–95 (2011)
*Corresponding author; Phone: ++34 968 325 762; Fax: ++34 968 325 433; E-mail: [email protected]
103
that has been approved by the World Health Organiza-tion (WHO) as a food preservative and is currently per-mitted in over 50 countries (6). Nisin can be used in pro-cessed cheese, canned food, and other food products, butthe practical application is still limited because of its lowstability and activity at high pH and its limited efficacyin certain food matrices (16).
Many herbs and spices have been used for millen-nia to provide distinctive flavours, but they also exhibitantimicrobial activity (17). Carvacrol is a phenolic com-pound present in the essential oil fraction of Origanum(18), commonly known as oregano. These sorts of pheno-lic compounds are hydrophobic and their primary siteof toxicity is the membrane. They accumulate in the li-pid bilayer according to a partition coefficient that is spe-cific for the applied compound, leading to disruption ofthe membrane structure and function (19,20). As a re-sult, the permeability increases and the activity of theenzymatic systems, including those involved in energyproduction and structural component synthesis, is affect-ed (21–23). A critical concentration of the compound isneeded to cause leakage of cellular constituents (24). Inpractice, carvacrol is added to different products, e.g.baked goods (15.75 ppm), nonalcoholic beverages (28.54ppm), or chewing gum (8.42 ppm) (17,25).
By combining nisin with plant essential oils, the re-strictions in its use as a food preservative might be over-come and the range of applications could be expanded.Since both compounds act on the cytoplasmic mem-brane, an additive or synergistic effect and lower dosageof both compounds would be necessary to cause an in-hibitory effect (16). Synergism is observed when theeffect of the combined substances is greater than thesum of the individual effects, while an additive effect isobserved when the combined effect is equal to the sumof the individual effects, and antagonism corresponds toa lesser effect of one or both compounds when they areapplied together than when they are applied individu-ally (26). The synergistic antimicrobial effect of nisin andcarvacrol on the viability of L. monocytogenes cells hasbeen observed before (16). The actual mechanism of syn-ergy is not known. It has been proposed that carvacrolmight enhance the action of nisin by increasing the lifetime of pores created by nisin or by increasing the num-ber or size of the formed pores (16). The effect of a heatpretreatment on the sensitivity of Bacillus cereus to anti-microbials has also been investigated (27). So far, the via-bility of heat-treated L. monocytogenes cells exposed to thecombination of nisin and carvacrol has not been studied.The aim of this study is to evaluate the combined effectof a heat pretreatment with the use of antimicrobials ni-sin and carvacrol on the growth of L. monocytogenes andtheir potential uses as preservatives of minimally pro-cessed foods.
Materials and Methods
Bacterial strains and culture conditions
The strain of L. monocytogenes CECT 4031 used inthis study was supplied by the Spanish Type CultureCollection. During this investigation it was maintainedon slants of tryptic soy agar (TSA) supplemented with
0.6 % (m/V) yeast extract (TSAYE) (both from ScharlauChemie, Barcelona, Spain) at 4 °C.
The culture was grown for 24 h at 37 °C in tryptonesoy broth (Scharlau Chemie) supplemented with 0.6 %(m/V) yeast extract (TSBYE). The strains were then sub-cultured in TSBYE for another 24 h at 37 °C, until thestationary phase of growth was reached, at a concentra-tion of approx. 109 cells/mL. Working cultures were thendivided into two aliquots of which one served as thenonthermal control culture and the other was subjectedto a heat treatment. The nonthermal control culture wasappropriately diluted to 103 cells/mL, while the cultureexposed to the thermal treatment was diluted to 106
cells/mL. In this way, both cultures had the same initialnumber when starting growth.
Chemicals
Nisin and carvacrol (both from Sigma-Aldrich Che-mie, Steinheim, Germany) stock solutions (0.3 mM and0.5 M, respectively) were made in 95 % ethanol and storedat 4 °C.
Preparation of carrot juice
Carrot juice was prepared from fresh raw carrots ofthe Nantesa variety provided by a local factory of mini-mally processed foods. They were peeled, washed, mincedand filtered through a metal sieve. The juice was dis-pensed in tubes, heated with steam for 15 min, and storedat –40 °C. Natural inhibitors present in carrots were like-ly to be destroyed by this heat treatment (28). The finalpH was 6.14±0.10. Just before experiments, the tubes wereheated again with steam for 15 min and the temperaturewas adjusted to 37 °C.
Heat treatment
A mild heat pretreatment for 15 min at 55 °C wasselected as it resulted in a three-log reduction of cells.This heat treatment was applied to the culture grown inTSBYE for 24 h at 37 °C by placing the test tubes in apreheated water bath (Frimengruppe Press-Daimier, Dres-den, Germany). Plate counts in TSAYE of the appropri-ate dilutions in buffered peptone water (BPW) (ScharlauChemie) were performed before and after the thermaltreatment, in order to check the extent of the achievedinactivation. Plates were incubated for 24 h at 37 °C.
Growth curves of L. monocytogenes in TSBYE
The effect of nisin and carvacrol, individually andcombined, on the growth of L. monocytogenes CECT 4031suspended in TSBYE at 37 °C was studied. Controls with-out the addition of natural compounds but with the sameconcentration of ethanol were prepared. Cell suspensionswere exposed to different concentrations of nisin (0.13,0.26 and 0.39 mM) or carvacrol (0.11, 0.22, 0.33, 0.44 and0.66 mM) alone and to combinations of both compounds(0.13 mM nisin plus 0.11 mM carvacrol, and 0.13 mM ni-sin plus 0.22 mM carvacrol). In order to study the effectsof these compounds on L. monocytogenes lag time dura-tion and growth rate, the natural compounds were addedto the growth medium prior to the inocula (103 CFU/mL).Absorbance (A620 nm) was measured with a spectrophoto-meter (ZUZI 4110RS, Auxilab, Beriáin, Spain) at differ-
90 M.D. ESTEBAN and A. PALOP: Effect of Nisin and Carvacrol on L. monocytogenes, Food Technol. Biotechnol. 49 (1) 89–95 (2011)
104
ent time intervals during exposure. At least three repli-cate experiments per condition were performed.
Growth curves were obtained by plotting the A620 nm
against exposure time. Although the measurement of theabsorbance of a culture is only an estimation of its growth,it might help to compare the growth rate and lag phaseduration under different conditions. For this purpose,growth curves were fitted with the function of Baranyiet al. (29) in order to obtain the main growth parameters(i.e. specific growth rate and lag time). Only growthcurves with at least 10 points were used for modelling,as suggested by the authors.
When no growth was observed after 15 days of in-cubation, plate counts were performed in order to checkthe number of microorganisms present in the culture. Ifthe plate counting showed some growth, the culture wasfurther incubated.
Analysis of variance and Duncan´s multiple rangetest were done using the statistical program StatgraphicsPlus v. 5.1 (Statpoint Technologies, Inc, Warrenton, VA,USA). Differences between data were considered signifi-cant when p£0.05. The experiments were replicated threetimes for each treatment.
Growth curves of L. monocytogenes in carrot juice
The effect of nisin and carvacrol, individually andcombined, on the growth of L. monocytogenes CECT 4031in carrot juice at 37 °C was studied. Controls withoutthe addition of natural compounds but with the sameconcentration of ethanol were prepared. Tubes with 4.5mL of carrot juice were exposed to different concentra-tions of nisin (0.13 mM) or carvacrol (0.33 and 0.66 mM)alone or combined for 24 h at 37 °C to verify their inhi-bitory effect. In order to study the effects of these com-pounds on L. monocytogenes growth, the natural compoundswere added to the growth medium prior to the inocula(103 CFU/mL). Appropriate dilutions in BPW were pourplated in TSAYE and incubated at 37 °C for 24 h.
Results
Effect of nisin and carvacrol on the growth ofL. monocytogenes cells in TSBYE
When L. monocytogenes CECT 4031 in lag phase with-out a heat pretreatment was exposed in TSBYE to in-creasing concentrations of nisin alone (0.13, 0.26 and 0.39mM; Fig. 1a), or carvacrol alone (0.11, 0.22, 0.33, 0.44 and0.66 mM; Fig. 1b), both the onset of growth was delayedand the growth rate decreased (Table 1). Nevertheless,the behaviour was different for each antimicrobial agent.When exposed to 0.13 mM of nisin, the lag phase increasedfrom 13.84 to 17.03 h and the growth rate decreased from0.26 to 0.23 h–1. However, when the concentration of nisinwas further increased, up to 0.39 mM, growth parame-ters were not largely affected and no significant differen-ces were found between lag phases at these concentra-tions (Table 1).
On the contrary, the behaviour of L. monocytogeneswas more carvacrol concentration-dependent (Table 1).Concentrations higher than 0.11 mM progressively in-
creased the lag phase and decreased growth rate, to 0.66mM, which not only inhibited growth, but even inacti-vated microorganisms, as indicated by plate counts per-formed after a 15-day incubation. Increasing concentra-tions of carvacrol also had an effect on the maximumabsorbance, which was progressively lower.
An exponential correlation was observed for both thelag time and the growth rate in relation to the concen-tration of carvacrol in the growth medium (Fig. 2), withcorrelation coefficients (R2) higher than 0.95 in both cases.This means that the growth of this strain of L. monocyto-genes could be easily predicted as a function of carvacrolconcentration by simply substituting this concentrationin Eqs. 1 and 2:
log l=1.556×c+1.135 /1/
log m=–4.285×c–0.620 /2/
where l is the lag phase duration (h), c is the carvacrolconcentration (mM) and m the growth rate (h–1).
The effect of nisin and carvacrol added simulta-neously on the growth of L. monocytogenes CECT 4031 inlag phase in TSBYE broth at 37 °C was also studied. WhenL. monocytogenes was exposed to 0.13 mM nisin and 0.11mM carvacrol, the onset of growth was significantlydelayed (from 13.84 to 57.54 h) and the growth ratesignificantly reduced (from 0.26 to 0.09 h–1), leading toan important synergistic effect, at least in the lag timeduration: 0.13 mM nisin alone only increased lag time
91M.D. ESTEBAN and A. PALOP: Effect of Nisin and Carvacrol on L. monocytogenes, Food Technol. Biotechnol. 49 (1) 89–95 (2011)
0.0
0.2
0.4
0.6
0.8
1.0
0 5 10 15 20 25 30
t/h
a)
0.0
0.2
0.4
0.6
0.8
1.0
0 20 40 60 80 100 120
A6
20
nm
b)
t/h
A6
20
nm
Fig. 1. Effect of different concentrations of: a) nisin and b) carva-crol on the growth of L. monocytogenes CECT4031 in TSBYE at37 °C. a) � control, � 0.13 mM nisin, � 0.26 mM nisin, � 0.39 mMnisin; b) � control, � 0.11 mM carvacrol, � 0.22 mM carvacrol,� 0.33 mM carvacrol, � 0.44 mM carvacrol, � 0.66 mM carvacrol
105
for approx. 4 h, and 0.11 mM carvacrol alone for approx.5 h, but the combination of both antimicrobials increasedlag time for more than 40 h, which is much more thanthe addition of both increases. Regarding growth rate,the effect was only additive at these concentrations.When increasing concentrations of carvacrol were com-bined with this same concentration of nisin (0.13 mM),the growth of L. monocytogenes was completely inhibitedfor at least 15 days. Plate counts performed after this15-day incubation indicated that not only the growth wasinhibited, but the microorganisms were even inactivat-ed, as microbial counts were under the detection limit(<1 CFU/mL). Again, synergistic effects were observed.
Effect of a heat pretreatment on the growth ofL. monocytogenes cells in TSBYE
L. monocytogenes cells grown in TSBYE at 37 °C wereexposed to a thermal treatment for 15 min at 55 °C. Thisthermal treatment decreased the counts by three log
cycles. When these heat-treated L. monocytogenes cellswere grown in TSBYE at 37 °C, the growth rate did notsignificantly differ from that obtained with the cells notpreviously exposed to a heat treatment and lag phasewas only increased for 1 h (Table 1 and Fig. 3).
92 M.D. ESTEBAN and A. PALOP: Effect of Nisin and Carvacrol on L. monocytogenes, Food Technol. Biotechnol. 49 (1) 89–95 (2011)
Table 1. Growth parameters (lag time and growth rate) of L. monocytogenes CECT 4031 in TSBYE at 37 °C, with or without heat pre-treatment, exposed to different concentrations of nisin and carvacrol added separately or simultaneously
t/h m/h–1
Without HT With HT Without HT With HT
c(nisin)/mM 0 (13.84±0.02)Aa (14.84±0.18)Ab (0.26±0.0005)Ga (0.25±0.01)Da
0.13 (17.03±1.46)Ba (23.31±0.5)Bb (0.23±0.003)Eb (0.07±0.001)Aa
0.26 (18.42±1.90)B >15 days (0.24±0.003)F N.G.
0.39 (18.60±1.83)B >15 days (0.21±0.027)D N.G.
c(carvacrol)/mM 0 (13.84±0.02)Aa (14.84±0.18)Ab (0.26±0.0005)Ga (0.25±0.01)Da
0.11 (18.96±0.93)Bb (13.95±0.5)Aa (0.11±0.0007)Ca (0.26±0.01)Db
0.22 (33.18±4.52)Ca (32.57±0.001)Ca (0.015±0.003)Ba (0.16±0.01)Cb
0.33 (41.37±9.43)C n.d. (0.009±0.001)A N.D.
0.44 (67.19±7.92)Eb (39.89±3.53)Da (0.004±0.002)Aa (0.12±0.011)Bb
0.66 >15 days >15 days N.G. n.d.
c(nisin)/mM+c(carvacrol)/mM
0 (13.84±0.02)Aa (14.84±0.18)Ab (0.26±0.0005)Ga (0.25±0.01)Da
0.13+0.11 (57.54±5.33)D >15 days (0.09±0.04) C N.G.
0.13+0.22 >15 days >15 days N.G. N.G.
n.d.=not determined, N.G.=no growth after 15 days, HT=heat treatment at 55 °C for 15 min. The results represent mean values±stan-dard deviation of three replicates; the same capital letter indicates that there are no significant differences in columns; the same low-er case letter indicates that there are no significant differences in rows between lag times or growth rate of the heat-treated andnon-treated cells
-3.0
-2.5
-2.0
-1.5
-1.0
-0.5
0.0
0.0
0.5
1.0
1.5
2.0
0 0.1 0.2 0.3 0.4 0.5
log
l
c(carvacrol)/mM
log
m
Fig. 2. Growth parameters of L. monocytogenes CECT 4031 inTSBYE at 37 °C as a function of carvacrol concentration. � lagtime (l), � growth rate (m)
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
0 10 20 30 40
t/h
a)
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
0 20 40 60 80 100
b)
A620
nm
A620
nm
t/h
Fig. 3. Effect of combined concentrations of: a) nisin and b) car-vacrol on the growth in TSBYE at 37 °C of heat-treated (HT: 15min at 55 °C) or non-treated L. monocytogenes CECT 4031 cells.a) � control, � HT, � 0.13 mM nisin, � 0.13 mM nisin+HT; b) �control, � HT, � 0.22 mM carvacrol, � 0.22 mM carvacrol+HT
106
Effect of nisin and carvacrol on the growth ofheat-treated L. monocytogenes cells in TSBYE
The growth of heat-treated L. monocytogenes cells wasdramatically affected by exposure to nisin. At the lowestnisin concentration tested (0.13 mM), growth rate wassignificantly reduced (Fig. 3a). At higher concentrations,the growth was completely inhibited for at least 15 days(Table 1). Again, plate counts performed after the incu-bation showed microbial counts under the detection limit.
Regarding the growth of heat-treated L. monocyto-genes cells exposed to carvacrol, the behaviour was com-pletely different. The growth was even faster than thatof non-treated cells, at concentrations of carvacrol up to0.44 mM (Table 1 and Fig. 3b). At 0.66 mM the growthwas inhibited for at least 15 days, similarly to what hap-pened to the cells not exposed to a heat treatment.
The effect of nisin and carvacrol added simultane-ously on the growth of heat-treated L. monocytogenesCECT 4031 cells in TSBYE at 37 °C during lag phasewas also studied. When the heat-treated L. monocyto-genes CECT 4031 cells were exposed to different combi-nations of nisin and carvacrol in TSBYE, the growth wasinhibited for at least 15 days even at the lowest concen-tration tested (0.13 mM nisin plus 0.11 mM carvacrol).
Effect of nisin and carvacrol on the growth ofL. monocytogenes cells in carrot juice
The effect of the combinations of different concen-trations of nisin and carvacrol on the viable counts of L.monocytogenes CECT 4031 during lag phase cultured at37 °C in carrot juice (pH=6.14) exposed to a heat pre-treatment or not was studied. This part of the researchwas conducted using plate counts instead of absorbancemeasurements, because the latter cannot be performedin turbid food media. Hence, plate counts were per-formed after inoculation and incubation for 24 h at 37 °C.L. monocytogenes CECT 4031 showed different behaviourat the different concentrations of the antimicrobials andtheir combination with a heat pretreatment (Fig. 4). Theresults showed that L. monocytogenes reached the statio-nary phase of growth at a concentration of 6·108 CFU/mLin carrot juice, in 24 h or less at 37 °C with neither heatpretreatment nor antimicrobials added. No significantdifferences were observed between the control and the
heat-pretreated cells, although these showed a highervariability in the replicates.
When L. monocytogenes was grown in the presenceof 0.13 mM nisin, significant differences were observedregarding control, even though these differences weresmall (half a logarithmic cycle). For microorganisms in-cubated with carvacrol at concentrations of 0.33 and 0.66mM, a significant and progressive inhibition of growthwas observed. When nisin and carvacrol were combined,a further inhibition of growth was observed. A bacterio-static effect was even shown when the higher concen-tration of carvacrol (0.66 mM) was combined with 0.13mM nisin, since no growth was detected after 24 h ofincubation (Fig. 4). The application of a heat pretreat-ment to cells incubated with either nisin or carvacrol re-sulted in a significant decrease in plate count with re-spect to non-treated cells incubated with the same amountsof antimicrobials (Fig. 4). The combinations of heat plus0.66 mM carvacrol resulted in even lower counts thanbefore the incubation.
Discussion
L. monocytogenes showed different behaviour whenexposed to increasing concentrations of nisin than whenexposed to increasing concentrations of carvacrol. Whileboth antimicrobials inhibited the growth, the effect ofcarvacrol was progressive as the concentration of thiscompound increased, while the effect of nisin was lessdependent on its concentration. Actually, a good expo-nential correlation was found between both lag time andgrowth rate and carvacrol concentration (R2>0.95), whichenabled the building of a secondary growth model. Thisdeterministic model predicts the growth of L. monocyto-genes as a function of carvacrol concentration. Other au-thors have also found a dose-dependent inhibitory effectof carvacrol and other phenolic compounds on L. mono-cytogenes and other Gram-positive bacteria (17,30–32). Thisdifferent behaviour could depend on the mode of actionon the bacterial envelopes for each antimicrobial com-pound: nisin forms pores in the bacterial membrane (33),while phenolic compounds cause disruption of the mem-brane function (17). The different modes of action for ni-sin and carvacrol could explain, at least in part, the syn-ergistic effect observed when both antimicrobials werecombined: while a concentration of 0.11 mM carvacrolalone and 0.13 mM nisin alone had little effect on thegrowth of L. monocytogenes in TSBYE broth, the combi-nation of both compounds at these concentrations in-creased the synergistic effect by more than four times ofboth antimicrobials in lag time, and when higher con-centrations of carvacrol were combined with nisin, thegrowth was completely inhibited for at least 15 days,showing an even bactericidal effect. Pol et al. (34) alsofound synergistic effects in the combination of nisin andcarvacrol in germinating spores of Bacillus cereus.
A heat pretreatment did not affect the growth of thesurvivors, which grew in a similar way as the non-heat-ed cells. However, the heat pretreatment had an obviouseffect on the survivors when they were exposed to anti-microbials, i.e. in that case their behaviour was different.The application of a heat pretreatment had a synergistic
93M.D. ESTEBAN and A. PALOP: Effect of Nisin and Carvacrol on L. monocytogenes, Food Technol. Biotechnol. 49 (1) 89–95 (2011)
0
1
2
3
4
5
6
7
8
9
10
control 0.13 µM N 0.33 mM C 0.67 mM C 0.13 µM N +0.33 mM C
0.13 µM N +0.67 mM C
log
CF
U/m
L
Fig. 4. Effect of different concentrations of nisin and carvacrolalone or combined on the growth of L. monocytogenes CECT4031during 24 h at 37 °C in carrot juice (pH=6.14). White columns,non-heated L. monocytogenes cells; black columns, heat-treated L.monocytogenes cells (15 min at 55 °C). N=nisin, C=carvacrol. Ho-rizontal line represents the initial concentration of the inocula
107
effect with nisin, but it was antagonistic with carvacrol.Again, this fact supports the hypothesis of different tar-gets for nisin and carvacrol. While heat damage affectsthe targets for nisin, hampering the growth of cells ex-posed to this compound, it seems to cross-protect againstcarvacrol. Other authors have also found that sequentialcombinations of mild heat and nisin resulted in signifi-cant synergistic decreases in viable counts of Lactobacil-lus plantarum (33) and B. cereus (35). However, Periago etal. (36) found that B. cereus cells developed cross-resis-tance to nisin after a mild heat treatment. Heat shockproteins may be involved in this antagonistic effect andin the cross-protective effect (37).
However, when combining both antimicrobials, at thelowest concentrations tested for both of them (which onlyshowed slight inhibitory effect against L. monocytogenesgrowth when applied separately), with a heat pretreat-ment (which did not show any inhibitory effect), thegrowth was inhibited for at least 15 days. Again, a strongsynergistic effect was shown. The synergism between car-vacrol and nisin has already been shown in non-heatedcells of B. cereus (16,27,36) and L. monocytogenes (16) andin heat-pretreated cells of B. cereus (36). Heat can dam-age the RNA, ribosomes, cytoplasmic membranes andenzymes. Despite the increased resistance to carvacrolobserved after the exposure to heat, the combination ofheat, carvacrol and nisin caused irreversible injury tothe membrane, as well as to those structures damagedby heat, which was caused by the observed synergisticeffect. Synergies, like these described in this research,can be used in the food industry to prevent food spoil-age and ensure food safety, while maintaining a highstandard of food quality.
When nisin, carvacrol and a heat pretreatment wereapplied in a food matrix such as carrot juice, the behav-iour of L. monocytogenes resembled somehow that ob-served in TSBYE, although with some important differ-ences. Heat-treated cells grew as fast as the control cells(not exposed to a heat pretreatment), and nisin slightlyreduced the counts after 24 h of incubation at 37 °C incarrot juice. When nisin was applied after the heat treat-ment, a stronger inhibitory effect was observed. Carvac-rol had a progressive inhibitory effect. However, in thiscase, the combination of carvacrol with a heat pretreat-ment had a stronger inhibitory effect, which was evenbactericidal when 0.66 mM of carvacrol were combinedwith the heat pretreatment.
When carvacrol and nisin were combined in the car-rot juice, the growth of L. momocytogenes was also inhi-bited and a synergistic effect was observed. The growthwas completely inhibited for at least 24 h with a combi-nation of 0.13 mM nisin plus 0.66 mM carvacrol. Similareffects were also found by Periago et al. (30) when com-bining carvacrol and cymene against the growth of L.monocytogenes in carrot juice.
Conclusions
Nisin and carvacrol showed inhibitory effects on L.monocytogenes growth. When both antimicrobials werecombined, synergistic effects were observed. These syn-ergistic effects were even increased when a heat pretreat-
ment was also applied. These effects were observed in alaboratory medium but also in a food matrix such ascarrot juice. These synergisms could be applied in thefood industry to prevent the growth of L. monocytogenesin processed food exposed to mild heat treatments, in-tended to provide better quality foods.
Acknowledgements
This research was financially supported by the Min-istry of Science and Technology of the Spanish Govern-ment and European Regional Development Fund (ERDF)through Projects AGL-2003-00996 and AGL-2006-10280.M.D. Esteban is grateful to the Ministry of Science andTechnology for offering her the fellowship BES 2007–15471.
References
1. P.S. Mead, L. Slutsker, V. Dietz, L.F. McCaig, J.S. Bresee, C.Shapiro, P.M. Griffin, R.V. Tauxe, Food-related illness anddeath in the United States, Emerg. Infect. Dis. 5 (1999) 607–625.
2. E.T. Ryser, E.H. Marth: Listeria, Listeriosis, and Food Safety,CRC Press, Boca Raton, FL, USA (2007).
3. S.I. Dimitrijevi}, K.R. Mihajlovski, D.G. Antonovi}, M.R.Milanovi}-Stevanovi}, D.@. Mijin, A study of the syner-gistic antilisterial effects of a sub-lethal dose of lactic acidand essential oils from Thymus vulgaris L., Rosmarinus offi-cinalis L. and Origanum vulgare L., Food Chem. 104 (2007)774–782.
4. T.B. Hansen, S. Knøchel, Factors influencing resuscitationand growth of heat injured Listeria monocytogenes 13–249 insous vide cooked beef, Int. J. Food Microbiol. 63 (2001) 135–147.
5. R.W. Jack, J.R. Tagg, B. Ray, Bacteriocins of Gram-positivebacteria, Microbiol. Rev. 59 (1995) 171–200.
6. L.J. Harris, H.P. Fleming, T.R. Klaenhammer, Developmentsin nisin research, Food Res. Int. 25 (1992) 57–66.
7. U. Schillinger, R. Geisen, W.H. Holzapfel, Potential of anta-gonistic microorganisms and bacteriocins for the biologicalpreservation of foods, Trends Food Sci. Technol. 7 (1996) 158–164.
8. A.D. Crandall, T.J. Montville, Nisin resistance of Listeriamonocytogenes ATCC700302 is a complex phenotype, Appl.Environ. Microbiol. 64 (1998) 231–237.
9. J. Delves-Broughton, M.J. Gasson: Nisin. In: Natural Anti-microbial Systems and Food Preservation, V.M. Dillon, R.G.Board (Eds.), CAB International, Wallingford, UK (1994) pp.99–131.
10. B. Ray: Nisin of Lactococcus lactis ssp. lactis as Food Bio-preservative. In: Food Biopreservatives of Microbial Origin, B.Ray, M.A. Daeschel (Eds.), CRC Press, Boca Raton, FL, USA(1992) pp. 207–264.
11. A.J. Driessen, H.W. van den Hooven, W. Kuiper, M. vanKamp, H.G. Sahl, R.N. Konings, W.N. Konings, Mechanis-tic studies of lantibiotic-induced permeabilization of phos-pholipid vesicles, Biochemistry, 34 (1995) 1606–1614.
12. F.H. Gao, T. Abee, W.N. Konings, Mechanism of action ofthe peptide antibiotic nisin in liposomes and cytochrome coxidase-containing proteoliposomes, Appl. Environ. Micro-biol. 57 (1991) 2164–2170.
13. T. Abee, F.M. Rombouts, J. Hungenholtz, G. Guihard, L.Letellier, Mode of action of nisin Z against Listeria mono-cytogenes Scott A grown at high and low temperatures, Appl.Environ. Microbiol. 60 (1994) 1962–1968.
94 M.D. ESTEBAN and A. PALOP: Effect of Nisin and Carvacrol on L. monocytogenes, Food Technol. Biotechnol. 49 (1) 89–95 (2011)
108
14. L.J. Harris, H.P. Fleming, T.R. Klaenhammer, Develop-ments on nisin research, Food Res. Int. 25 (1992) 57–66.
15. O.P. Kuipers, H.S. Rollema, W.M.G.J. Yap, H.J. Boot, R.J.Siezen, W.M. de Vos, Engineering dehydrated amino acidresidues in the antimicrobial peptide nisin, J. Biol. Chem.267 (1992) 24340–24346.
16. I.E. Pol, E.J. Smid, Combined action of nisin and carvacrolon Bacillus cereus and Listeria monocytogenes, Lett. Appl. Micro-biol. 29 (1999) 166–170.
17. A. Ultee, L.G. Gorris, E.J. Smid, Bactericidal activity of car-vacrol towards the food-borne pathogen Bacillus cereus, J.Appl. Microbiol. 85 (1998) 211–218.
18. V. Lagouri, G. Blekas, M. Tsimidou, S. Kokkini, D. Boskou,Composition and antioxidant activity of essential oils fromoregano plants grown wild in Greece, Z. Lebensm. Unters.Forsch. A, 197 (1993) 20–23.
19. I.M. Helander, H.L. Alakomi, K. Latva-Kala, T. Mattila--Sandholm, I. Pol, E.J. Smid, L.G.M. Gorris, A. von Wright,Characterization of the action of selected essential oil com-ponents on Gram-negative bacteria, J. Agric. Food Chem. 46(1998) 3590–3595.
20. B.J. Juven, J. Kanner, F. Schved, H. Weisslowicz, Factorsthat interact with the antibacterial action of thyme essen-tial oil and its active constituents, J. Appl. Bacteriol. 76 (1994)626–631.
21. D.E. Conner: Naturally Occurring Compounds. In: Antimi-crobials in Foods, P.M. Davidson, A.L. Branen (Eds.), MarcelDekker, New York, NY, USA (1993) pp. 441–468.
22. G.J.E. Nychas: Natural Antimicrobials from Plants. In: NewMethods of Food Preservation G.W. Gould (Ed.), Blackie Aca-demic and Professional, Glasgow, UK (1995) pp. 58–89.
23. J. Sikkema, J.A.M. de Bont, B. Poolman, Interactions of cy-clic hydrocarbons with biological membranes, J. Biol. Chem.269 (1994) 8022–8028.
24. M.J. Mendoza-Yepes, L.E. Sanchez-Hidalgo, G. Maertens,F. Marin-Iniesta, Inhibition of Listeria monocytogenes andother bacteria by a plant essential oil (DMC) in Spanishsoft cheese, J. Food Safety, 17 (1997) 47–55.
25. A. Ultee, R.A. Slump, G. Steging, E.J. Smid, Antimicrobialactivity of carvacrol towards Bacillus cereus on rice, J. FoodProt. 63 (2000) 620–624.
26. P.M. Davidson, M.E. Parish, Methods for testing the effi-cacy of food antimicrobials, Food Technol. 43 (1989) 148–155.
27. P.M. Periago, R. Moezelaar, Combined effect of nisin andcarvacrol at different pH and temperature levels on the via-bility of different strains of Bacillus cereus, Int. J. Food Mi-crobiol. 68 (2001) 141–148.
28. M. Valero, S. Leontidis, P.S. Fernández, A. Martínez, M.C.Salmerón, Growth of Bacillus cereus in natural and acidi-fied carrot substrates over the temperature range 5–30 °C,Food Microbiol. 17 (2000) 605–612.
29. J. Baranyi, T.A. Roberts, P. McClure, A non-autonomousdifferential equation to model bacterial growth, Food Mi-crobiol. 10 (1993) 43–59.
30. P.M. Periago, B. Delgado, P.S. Fernández, A. Palop, Use ofcarvacrol and cymene to control growth and viability ofListeria monocytogenes cells and predictions of survivors usingfrequency distribution functions, J. Food Prot. 67 (2004)1408–1416.
31. A. Ultee, E.P.W. Kets, E.J. Smid, Mechanism of action ofcarvacrol on the food-borne pathogen Bacillus cereus, Appl.Environ. Microbiol. 65 (1999) 4606–4610.
32. K. Ettayebi, J. El-Yamani, B.D. Rossi-Hassani, Synergisticeffects of nisin and thymol on antimicrobial activities inListeria monocytogenes and Bacillus subtilis, FEMS Microbiol.Lett. 183 (2000) 191–195.
33. J.E. Ueckert, P.F. ter Steeg, P.J. Coote, Synergistic antibac-terial action of heat in combination with nisin and maga-inin II amide, J. Appl. Microbiol. 85 (1998) 487–494.
34. I.E. Pol, W.G.C. van Arendonk, H.C. Mastwijk, J. Krom-mer, E.J. Smid, R. Moezelaar, Sensitivities of germinatingspores and carvacrol-adapted vegetative cells and sporesof Bacillus cereus to nisin and pulsed-electric-field treat-ment, Appl. Environ. Microbiol. 67 (2001) 1693–1699.
35. L.R. Beuchat: Antimicrobial Properties of Spices and TheirEssential Oils. In: Natural Antimicrobial Systems and Food Pre-servation, V.M. Dillon, R.G. Board (Eds.), CAB Internatio-nal, Wallingford, UK (1994) pp. 167–179.
36. P.M. Periago, A. Palop, P.S. Fernández, Combined effect ofnisin, carvacrol and thymol on the viability of Bacillus ce-reus heat-treated vegetative cells, Food Sci. Technol. Int. 7(2001) 487–492.
37. P.M. Periago, A. Palop, A. Martínez, P.S. Fernández, Ex-ploring new mathematical approaches to microbiologicalfood safety evaluation: An approach to more efficient riskassessment implementation, Dairy Food Environ. Sanit. 22(2002) 18–23.
95M.D. ESTEBAN and A. PALOP: Effect of Nisin and Carvacrol on L. monocytogenes, Food Technol. Biotechnol. 49 (1) 89–95 (2011)
109
5.4. CAPITULO IV: “Efecto combinado effect of nisin,
carvacrol and a previous thermal treatment on the growth of
Salmonella enteritidis and Salmonella senftenberg.”
Este capítulo se corresponde con el siguiente artículo, publicado en la revista Food
Science and Thechnology International:
Esteban, M.-D., Aznar, A. Fernández, P.S. y Palop, A. Combined effect of nisin,
carvacrol and a previous thermal treatment on the growth of Salmonella enteritidis and
Salmonella senftenberg. Food Science and Thechnology International ,19: 357-364
(2013)
Las bacterias Gram negativas, debido a las características estructurales de su pared
celular, con una membrana externa rodeando al peptidoglicano, muestran una mayor
resistencia que las Gram positivas frente a los compuestos químicos. Sin embargo, el
calor afecta a la integridad de la membrana externa (Boziaris y Adams, 2001), por lo
que cabría esperar una mayor sensibilidad de las bacterias Gram negativas a los
antimicrobianos al ser sometidas a un tratamiento térmico previo. De hecho, Álvarez et
al. (2007) ya observaron un mayor efecto del calor al ser aplicado en presencia de
compuestos antimicrobianos.
Por esto, en este capítulo se pretendía realizar un estudio similar al llevado a cabo en
el capítulo anterior, pero con una bacteria Gram negativa. El objetivo era determinar si
las diferencias fisiológicas existentes entre una bacteria Gram negativa y una Gram
positiva afectarían al crecimiento en presencia de antimicrobianos naturales de los
supervivientes a un tratamiento térmico. En este caso, como microorganismos de
estudio se seleccionó la cepa tipo de Salmenella y otra cepa, Salmonella Senftemberg,
por ser una cepa termorresistente.
Los resultados mostraron que, si bien el tratamiento térmico previo también
sensibilizaba a los supervivientes frente a la presencia de antimicrobianos, los efectos en
este caso eran solamente aditivos.
111
Article
Combined effect of nisin, carvacrol and aprevious thermal treatment on the growth ofSalmonella enteritidis and Salmonella senftenberg
Marıa-Dolores Esteban1, Arantxa Aznar1, Pablo S Fernandez1,2
and Alfredo Palop1,2
AbstractThe aim of this study was to evaluate the combined effect of a previous mild heat treatment (15 min at 55 �C)with the use of antimicrobials, nisin and carvacrol, on the growth of Salmonella enteritidis and Salmonellasenftenberg. Natural antimicrobials, alone or combined with a previous mild heat treatment, affected thegrowth of these two serovars in Tryptone Soy Broth at 37 �C. Increasing concentrations of carvacrol had asignificant effect on both growth rate and lag phase duration of both strains. The time to reach stationaryphase was almost doubled in the case of S. enteritidis when a concentration of 0.77 mM in carvacrol wasadded. For S. senftenberg the effect was smaller. The effect of nisin and of heat, applied individually, waslower for both microorganisms. A combination of 1.2 mM nisin with 0.77 mM carvacrol significantly delayed thegrowth of heat treated cells, compared to the control without antimicrobials, showing additive effects.
KeywordsNisin, carvacrol, Salmonella, antimicrobials, combined preservation processes
Date received: 23 January 2012; revised: 13 April 2012
INTRODUCTION
Salmonella is a pathogenic microorganism responsiblefor one of the most frequent foodborne diseases.Salmonella enteritidis and Salmonella typhimurium arethe serovars most frequently involved in food poisoningoutbreaks (EFSA, 2012). However, other very highheat-resistant serovars, such as Salmonella senftenberg(Manas et al., 2003; Munoz-Cuevas et al., 2011), havebeen involved in different outbreaks (L’Ecuyer et al.,1996; Rushdy et al., 1998).
Food manufacturers and consumers demand addi-tive free, fresher and more natural taste food productswhile maintaining microbiological safety. This increas-ing demand could be accomplished by the use of nat-ural antimicrobial systems in combination with mild
heat for preservation of foods. The use of natural anti-microbials for food safety assurance has receivedincreasing attention in the last few years.
Nisin is a bacteriocin that can have bactericidaleffects against a broad range of Gram-positive bacteria(Harris et al., 1992; Jack et al., 1995). It permeabilizesthe cytoplasmic membrane by forming pores in themembrane, resulting in a rapid efflux of small molecules(Crandall and Montville, 1998; Delves-Broughtonand Gasson, 1994; Ray, 1992). Nisin is GenerallyRecognized As Safe (GRAS status) and is the only bac-teriocin that has been approved by the World Health
1Departamento Ingenierıa de Alimentos y del EquipamientoAgrıcola, Universidad Politecnica de Cartagena, Spain2Instituto de Biotecnologıa Vegetal, Universidad Politecnica deCartagena, Spain
Corresponding author:Alfredo Palop, Departamento Ingenierıa de Alimentos y delEquipamiento Agrıcola, Universidad Politecnica de Cartagena,Paseo Alfonso XIII 48, 30203 Cartagena, Spain.Email: [email protected]
Food Science and Technology International 19(4) 357–364! The Author(s) 2012 Reprints and permissions:sagepub.co.uk/journalsPermissions.navDOI: 10.1177/1082013212455185fst.sagepub.com
Organization (WHO) as a food preservative and is cur-rently permitted in over 50 countries (Harries et al.,1992). Typical concentrations of nisin (2.5 to12.5 ppm) are used by the food industry (Delves-Broughton et al., 1992).
Many herbs and spices have been used for millenniato provide distinctive flavors, but they also exhibit anti-microbial activity (Ultee et al., 1998). Carvacrol is aphenolic compound present in the essential oil fractionof Origanum (Lagoury et al., 1993), commonly knownas oregano. These sort of phenolic compounds arehydrophobic and their primary site of toxicity is themembrane (Helander et al., 1998; Juven et al., 1994).Carvacrol is a GRAS flavoring and it is typically usedin the minimum concentration required to produce theintended effect. In practice, carvacrol is added to differ-ent products, e.g. baked goods (15.75 ppm), nonalco-holic beverages (28.54 ppm), or chewing gum(8.42 ppm) (Ultee et al., 1998, 2000).
By combining nisin with plant essential oils, therestrictions in the use as food preservatives might beovercome and the range of application could beexpanded. Since both compounds act on the cytoplas-mic membrane an additive or synergistic effect at lowerdosage of both compounds would be necessary to causean inhibitory effect (Pol and Smid, 1999). The synergis-tic antimicrobial effect of nisin and carvacrol has beenobserved before on Listeria monocytogenes (Estebanand Palop, 2011; Pol and Smid, 1999) and Bacilluscereus (Periago and Moezelaar, 2001; Periago et al.,2001; Pol and Smid, 1999). The effect of a previousheat treatment on the sensitivity of B. cereus and L.monocytogenes to antimicrobials has also been investi-gated (Periago and Moezelaar, 2001; Periago et al.,2001). Esteban and Palop (2011) showed that the sur-vivors of L. monocytogenes cells to a previous heattreatment, which were able to grow at the same ratethan native cells when cultured without antimicrobials,increased largely their sensitivity to nisin and carvacrolwhen applied together.
Gram-negative bacteria are somehow protectedagainst this sort of antimicrobials because of theouter membrane of their cell wall, which covers thecytoplasmic membrane and peptide-glycan layeracting as a barrier against hydrophobic macromol-ecules (Holey and Patel, 2005). However, heat isknown to disrupt the outer membrane of these bacteria(Boziaris and Adams, 2001), and an additive or evensynergistic effect could be expected when combiningthese agents. Alvarez et al. (2007) showed thatSalmonella cells were more rapidly inactivated byirradiation and heat when treated in presence of nisinand carvacrol. These authors studied the simultaneouseffect of heat and antimicrobials, but they did not testthe growth of the survivors in presence of
antimicrobials. When antimicrobials are added toheat treated foods, they may show their effect duringthe thermal treatment but also afterwards, during thestorage of these products. However, the growth in thepresence of nisin and carvacrol of S. enteritidis and S.senftenberg cells surviving to a thermal treatment hasnot been studied. Survivors after heating could besomehow damaged (Arroyo et al., 2009), and thisdamage could affect the growth under stressful condi-tions, such as those imposed by the presence of anti-microbials in the growth medium. The aim of this studywas to evaluate the combined effect of a previous heattreatment with the use of antimicrobials, nisin and car-vacrol, on the growth of S. enteritidis and S. senften-berg. These data could be useful for food processors toensure the safety along the shelf-life of heat-treatedfoods.
MATERIALS AND METHODS
Bacterial strains and culture conditions
The strains of Salmonella enterica serovar Senftenberg(CECT 4565, ATCC 43845) and Salmonella entericaserovar Enteritidis (CECT 4300, ATCC 13076, typestrain) used in this study were supplied by theSpanish Type Culture Collection (CECT). During thisinvestigation they were maintained on slants of TrypticSoy Agar (TSA) (Scharlau Chemie, Barcelona, Spain)supplemented with 0.6% (w/v) yeast extract (ScharlauChemie) (TSAYE) at 4 �C. S. enteritidis type strain waschosen as a reference strain of this species and S. senf-tenberg because it is a well-known heat-resistant strain.
Cultures were grown at 37 �C in Tryptone Soy Broth(Scharlau Chemie) supplemented with 0.6% (w/v) yeastextract (TSBYE) as described elsewhere (Esteban andPalop, 2011).
Chemicals
Nisin (Sigma Aldrich Chemie, Steinheim, Germany)and carvacrol (Sigma Aldrich Chemie) stock solutions(0.3mM and 0.5M, respectively) were made in 95%ethanol and stored at 4 �C.
Heat treatment
A previous heat treatment of 15min at 55 �C wasselected as it resulted in three log reductions of S. enter-itidis cells and in one log reduction of S. senftenberg(data not shown). This heat treatment was applied tothe culture (�109CFU/mL) grown in TSBYE forapproximately 18 h at 37 �C, in this same medium, byplacing the test tubes in a preheated water bath(Frimengruppe Press-Daimier, Dresden, Germany).
Food Science and Technology International 19(4)
358
Growth curves of S. senftenberg andS. enteritidis in TSBYE broth
The effect of nisin and carvacrol, individually and com-bined, on the growth of S. senftenberg and S. enteritidissuspended in TSBYE at 37 �C was studied. Controlswithout the addition of natural compounds but withthe same concentration of ethanol (up to 18 mL etha-nol/mL TSBYE broth) were prepared. Both suspen-sions, control and pre-heated cells, were exposed todifferent concentrations of nisin (0.13, 0.26, 0.39 and1.2 mM) or carvacrol (0.11, 0.33, 0.55 and 0.77mM)alone and to combinations of both compounds(1.2 mM nisinþ 0.77mM carvacrol). These concentra-tions of antimicrobials only produce slight changes incolour (less than 0.1 optical density units) and odor.The natural compounds were added to the growthmedium prior to the inocula (103 CFU/mL). Whenpre-heated cells were assayed, a similar concentrationof viable cells was added to the tubes with the anti-microbials just after the heat treatment.
The growth at 37 �C was estimated through absorb-ance measurements in microtiter plates at 420–580 nmin a Bioscreen C analyzer running under the low shak-ing mode (Lab Systems, Helsinki, Finland). The indi-vidual and combined effect of each factor (heattreatment and incubation with carvacrol and nisin) onthe growth of both serovars was observed.
Growth curves were obtained by plotting theabsorbance against exposure time, using the methodof Smelt et al. (2002) to convert Optical Density read-ings (OD) into estimated lag phase (equation (1)). Assuggested by these authors, the following assumptionswere made to estimate real lag times from growthcurves obtained from OD measurements. Lag time isconsidered as the time needed for cells to adapt to thenew environmental conditions and divide into twodaughter cells. After division, cells were consideredto be growing immediately at maximum growth rate,mmax. Generation time (gt) was calculated for the dif-ferent antimicrobials and concentrations tested. Thefirst signs of turbidity were observed when thenumber of cells was 106, which corresponded to 9.97generations (Ng). Thus, the true lag time (�t) was cal-culated as
�t ¼ tt � gt �Ngð Þ ð1Þ
where tt is the time when first signs of turbidityappeared.
OD readings were performed twice per hour until thestationary phase of growth was reached. The growthcurves were fitted with the function of Baranyi(Baranyi et al., 1993; equation (2)) in order to obtain
the main growth parameters (i.e. specific growth rateand lag time).
yðtÞ ¼ y0 þ �max � AðtÞ �1
mln 1þ
em�maxA ðtÞ � 1
em ð ymax�y0Þ
� �ð2Þ
where y(t) denotes the OD of the culture, y0 denotes theinitial OD, m is a curvature parameter to characterisethe transition of the exponential growth phase to thestationary growth phase, �max denotes the maximumgrowth rate and ymax the maximum OD. A(t) playsthe role of a gradual delay on time to describe the tran-sition of the lag phase to the exponential growth phase(equation (3))
AðtÞ ¼ tþ1
vlnðe�vt þ e�h0 � e�vt�h0Þ ð3Þ
where v is another curvature parameter to characterisethe transition of the lag phase to the exponentialgrowth phase and h0 is a parameter to characterisethe physiological state of the cells.
Data analysis
Analysis of variance and Duncan’s multiple range testwere done using the statistic program Statgraphics v.Plus 5.1 (Statpoint Technologies, Inc., Warrenton, VA,USA). Differences between lag phase duration andgrowth rate were considered significant when p� 0.05.The experiments were replicated three times for eachtreatment.
RESULTS
Effect of nisin and carvacrol on the growth ofS. senftenberg and S. enteritidis
Increasing concentrations of carvacrol had a significanteffect on both growth rate and lag phase duration of S.enteritidis and S. senftenberg (Figure 1). The effect onthe lag phase was significant in both serovars tested(Figure 1(a)), being increased in 2 h approximately atthe maximum concentration tested, 0.77mM. The effecton the growth rate was different for both serovars(Figure 1(b)). In the case of S. enteritidis, a concentra-tion of 0.11mM carvacrol reduced the growth rate toless than half its original value, from 0.40� 0.03 to0.17� 0.007 h�1, and when the concentration of carva-crol was increased up to 0.77mM the growthrate was further decreased to 0.09� 0.005 h�1. ForS. senftenberg the effect was smaller, with 0.77mMcarvacrol reducing growth rate from 0.43� 0.01 to0.26� 0.02 h�1. Controls without the addition of carva-crol but with the same concentration of ethanol grew ata similar rate than the control without ethanol, so the
Esteban et al.
359
antimicrobial effect could not be attributed to the pres-ence of ethanol (data not shown).
The overall effect of the maximum concentration ofcarvacrol tested (0.77mM) on the whole growth curveof both strains of Salmonella can be seen in Figure 2.The time to reach stationary phase (i.e. approximately0.9 absorbance units) was almost doubled, from 7 to15 h, in the case of S. enteritidis (Figure 2(a)) but onlyincreased in approximately 2 h for S. senftenberg(Figure 2(b)) when the control was compared with thegrowth in presence of 0.77mM carvacrol.
The effect of nisin was lower for both microorgan-isms, with no significant differences in the lag phasecompared to the control, whereas there were significantdifferences in the growth rate at the highest level tested,at a concentration of 1.2 mM (Figure 2). At this concen-tration (1.2 mM nisin), the growth rate was reducedfrom 0.40� 0.03 to 0.17� 0.008 h�1 for S. enteritidis.Again, the effect was smaller for S. senftenberg, withthe growth rate being reduced from 0.43� 0.01 to0.33� 0.02 h�1. Again, controls without the addition
of nisin but with the same concentration of ethanolgrew at a similar rate than the control without ethanol(data not shown).The combination of both nisin andcarvacrol, at the same concentrations tested, had addi-tive effects on the growth of both serovars ofSalmonella (data not shown).
Effect of a previous heat treatment on thegrowth of S. senftenberg and S. enteritidis
Salmonella cells grown in TSBYE at 37 �C wereexposed to a thermal treatment for 15min at 55 �C.When S. enteritidis heat-treated cells were grown inTSBYE at 37 �C just after the thermal treatment, thegrowth rate was decreased from 0.40� 0.03 to0.32� 0.03 h�1 and the lag phase increased from5.64� 0.08 h to 7.27� 0.15 h, with an overall effect onthe growth curve of an increase in the time to reach fullgrowth of approximately 3 h (Figure 2(a)). In the caseof S. senftenberg the effect was again smaller, with thegrowth rate not being significantly different (p� 0.05)
12(a) (b)
10
8
6
4
2
0
0.5
0.4
0.3
0.2
0.1
0.00
A a B c C eC b D d
B b A aB aC bD c
0.11 0.33Carvacrol (mM) Carvacrol (mM)
0.55 0.77 0 0.11 0.33 0.55 0.77
Lag
phas
e (h
)
Gro
wth
rate
(h–1
)
Figure 1. Lag phase (a) and growth rate (b) in tryptone soy broth supplemented with 0.6% yeast extract (TSBYE) at 37 �Cin presence of different concentrations of carvacrol («: Salmonella enteritidis; #: Salmonella senftenberg). Same capitalletters indicate that there are no significant differences between growth parameters of Salmonella enteritidis. Same lowercase letters indicate that there are no significant differences between growth parameters of Salmonella senftenberg.
0
0.2
0.4
0.6
0.8
1
1.2
A62
0nm
n
t (h)
(a)
0
0.2
0.4
0.6
0.8
1
1.2
0 5 10 15 20 0 5 10 15 20
A62
0nm
n
t (h)
(b)
Figure 2. Growth curves of Salmonella enteritidis (a) and Salmonella senftenberg (b) in tryptone soy broth supplementedwith 0.6% yeast extract (TSBYE) at 37 �C in different conditions (¨: control; #: 1.2 mM nisin; ~: previous heat treatment15 min at 55 �C; *:0.77 mM carvacrol; ^: heat treatmentþ 1.2 mM nisinþ 0.77 mM carvacrol).
Food Science and Technology International 19(4)
36015
from that obtained with the cells not exposed to a pre-vious heat treatment and the lag phase being increasedin only 1 h (Figure 2(b)).
Effect of nisin and carvacrol on the growth ofheat-treated S. senftenberg and S. enteritidis
The effect of carvacrol on the growth of heat-treatedcells of both serovars of Salmonella was not signifi-cantly different from its effect on the growth ofunheated cells (Figure 3). Again, lag phase wasincreased in approximately 2 h at the maximum concen-tration tested (0.77mM) for both serovars. The growthrate of heat-treated S. enteritidis cells was reduced toalmost one-third (from 0.32� 0.03 to 0.12� 0.06 h�1)when 0.33mM carvacrol was added to the growthmedium. However, a further increase in the carvacrolconcentration did not mean a decrease in the growthrate. In the case of heat-treated cells of S. senftenberg,the growth rate was decreased from 0.37� 0.007 to0.16� 0.02 h�1 when 0.77mM carvacrol was added tothe growth medium.
The combination of all three treatments, nisin, car-vacrol and a previous heat treatment, had additiveeffects on the growth of both serovars of Salmonella(Figure 2). The lag phase was further increased andthe growth rate further decreased showing, for bothserovars, the slowest growth. This can contribute to acontrol strategy against Salmonella growth, and itshould be taken into account that the incubation fac-tors for growth after the thermal treatment (incubationtemperature, nutrients and pH) were optimal for itsgrowth in our study, so it can be considered as aworst-case-scenario.
DISCUSSION
The addition of carvacrol to the growth medium had asignificant effect on the growth of both strains ofSalmonella tested. Carvacrol is known to increasethe permeability of the cytoplasmic membrane andto decrease the activity of the enzymatic systems,including those involved in energy production andstructural component synthesis will be affected(Conner, 1993; Nychas, 1995; Sikkema et al, 1994).A critical concentration of the compound is neededto cause leakage of cellular constituents (Mendoza-Yepes et al., 1997). Periago et al. (2004) found thatincreasing concentrations of carvacrol had significanteffects on the growth of L. monocytogenes. However,Gram-negative bacteria are naturally resistant to theseantimicrobials because of the protective effect of theouter membrane (Holey and Patel, 2005). Still, Burtet al. (2007) found a similar dose-dependent effect ofcarvacrol on the growth of S. enteritidis. Our resultsdid not show such a dose-dependent effect in none ofthe serovars studied, although there was a trend indelaying growth when increasing concentration of car-vacrol in both serovars.
Our results showed a scarce, although significanteffect (p� 0.05) of 1.2 mM nisin on the growth ofboth serovars of Salmonella. The low effect of nisinon the growth of Salmonella spp. has already beendescribed in other reports (Rattanachaikunsopon andPhumkhachorn, 2010), and it is probably due to theprotection conferred by the outer membrane ofGram-negative bacteria (Helander and Mattila-Sandholm, 2000).
12(a) (b)
10
8
6
4
2
0
0.5
0.4
0.3
0.2
0.1
0.00
A a B a A b C d D c
A c B aA bC cdD d
0.11 0.33
Carvacrol (mM) Carvacrol (mM)
0.55 0.77 0 0.11 0.33 0.55 0.77
Lag
phas
e (h
)
Gro
wth
rate
(h–1
)
Figure 3. Lag time (a) and growth rate (b) in tryptone soy broth supplemented with 0.6% yeast extract (TSBYE) at 37 �Cafter a thermal treatment of 55 �C/15 min in presence of different concentrations of carvacrol (« :Salmonella enteritidis;#:Salmonella senftenberg). Same capital letters indicate that there are no significant differences between growth parametersof Salmonella enteritidis. Same lower case letters indicate that there are no significant differences between growth par-ameters of Salmonella senftenberg.
Esteban et al.
361
Since nisin and carvacrol act on the cytoplasmicmembrane, an additive or synergistic effect of bothcompounds could have been expected. A synergisticantimicrobial effect of nisin and carvacrol has beenobserved before in vitro on L. monocytogenes and B.cereus (Periago and Moezelaar, 2001; Periago et al.,2001; Pol and Smid, 1999) and in carrot juice on L.monocytogenes (Esteban and Palop, 2011). However,the combination of nisin with carvacrol did not leadto increased significant effects on the growth of bothserovars of Salmonella. The lack of synergism in thegrowth of Salmonella serovars could be easilyexplained, again, in terms of the protective effect ofthe outer membrane. Actually, these two antimicrobialsare mainly used against Gram-positive bacteria (Burtet al., 2007; Rattanachaikunsopon and Phumkhachorn,2010).
When nisin has been applied together with othertreatments altering the outer membrane of Gram-nega-tive bacteria, their growth has been inhibited.Salmonella species treated with the chelating agentEDTA become sensitive to nisin (Stevens et al., 1991).Treatment with trisodium phosphate increased the nisinsensitivity of Escherichia coli, Campylobacter jejuni,Pseudomonas fluorescens and Salmonella enteritidis(Carneiro de Melo et al., 1998). It has been shownthat a mild thermal treatment of 55 �C for 10min isalso able to disrupt the outer membrane of Gram-nega-tive bacteria (Boziaris and Adams, 2001), enablingchemical compounds to reach peptide-glycan and cyto-plasmic membrane and, as a consequence, a synergisticreduction of Salmonella population in samples contain-ing 2500 IU nisin/mL while heating (Boziaris et al.,1998). Alvarez et al. (2007) also found a synergisticreduction of Salmonella population in samples contain-ing 100 IU nisin/mL and 0.5mM carvacrol. But theseauthors applied the antimicrobials in the heating media,during the thermal treatments at 57 �C and 60 �C. Inour experiments the thermal treatment was applied justbefore growth in presence of carvacrol and nisin. Thisthermal treatment was supposed to sensitise the surviv-ing microorganisms against the antimicrobials, leadingthen to synergistic effects. In this sense Arroyo et al.(2009) found a great proportion of heat injured cellsafter the application of a thermal treatment.However, the results showed that the combinationonly had an additive effect on the growth of both ser-ovars of Salmonella. Actually, Arroyo et al. (2011)found a great complexity on the adaptative responsesdepending on the stress applied, leading to the protect-ive, sensitizing or even no effect. Then, an adaptiveresponse of the survivors of the thermal treatmentcould have lead to the development of higher resistanceto the antimicrobials, explaining the lack of synergism.In fact, other authors have found development of cross-
resistance to nisin after a mild heat treatment in B.cereus vegetative cells (Periago et al., 2001). Heatshock proteins may be involved in the cross-protectiveeffect (Periago et al., 2002) and could have diminishedthe extent of the combined effect. However, Lee et al.(2002) found that a concentration of 100 IU/mL nisinsignificantly inhibited the growth of E. coli previouslyheated at 50 �C for 15min and similar experiments haveshown a synergistic effect of a previous heat treatmenton the sensitivity of the Gram-positives B. cereus andL. monocytogenes to antimicrobials (Esteban andPalop, 2011; Periago and Moezelaar, 2001).
The effect on growth of carvacrol, nisin and a pre-vious heat treatment was different on both serovars ofSalmonella. Differences in the resistance to heat, acid orhydrogen peroxide have been found even among differ-ent isolates of the same phage type 4 of S. enteritidis(Humphrey et al., 1995). S. senftenberg was, in general,less sensitive to all three antimicrobial agents. S. senf-tenberg is the most heat-resistant serovar of the genusSalmonella (Metrick et al., 1989). This fact could sug-gest similar resistance mechanisms against both carva-crol and heat. Analogous relationships between heatand pulse electric field resistance mechanisms werefound by Alvarez et al. (2003). The behavior of differentstrains is important to establish the potential risk andits variability to establish processing conditions.
The combination of a previous thermal treatmentwith the presence of carvacrol and nisin could be afeasible alternative to increase the microbial safety ofprocessed foods. This is relevant from a processingpoint of view, where the preservation factors presentor applied to the food have to be studied in depth toavoid food safety concerns. New combinations (lowtemperature, other compounds, etc.) should be studiedin future research for efficient preservation strategies.Also, experiments in food systems appropriate for theapplication of these natural antimicrobial compoundsshould be conducted in order to observe if the additiveeffects are still kept.
CONCLUSIONS
In summary, our results show a trend in delayinggrowth when increasing concentration of carvacrol inboth microorganisms. The individual effect of nisin waslower and only significant at the highest concentrationtested. Heat also had a rather low effect. The combinedeffect of these three treatments were additive on bothserovars of Salmonella. These results can be consideredas a worst-case-scenario in terms of bacterial growth,since all the conditions for growth after the thermaltreatment, except those being tested, were optimal.In food products, where suboptimal conditions for
Food Science and Technology International 19(4)
36217
growth usually take place (i.e. low pH, lower tempera-ture, etc.) further growth inhibition could be expected.
FUNDING
This research was financially supported by the Ministry of
Sciece and Technology of the Spanish Government andEuropean Regional Development Fund (ERDF) throughProjects AGL-2010-19775 and 08795/PI/08 from FundacionSeneca.
ACKNOWLEDGMENTS
M. D. Esteban is grateful to the Ministry of Science and
Technology for offering her the fellowship BES 2007-15471.
REFERENCES
Alvarez I, Manas P, Condon S and Raso J. (2003). Resistance
variation of Salmonella enterica serovars to pulsed electric
fields treatments. Journal of Food Science 68: 2316–2320.Alvarez I, Niemira BA, Fan X and Sommers CH. (2007).
Inactivation of Salmonella Enteritidis and Salmonella
Senftenberg in liquid whole egg using generally recognize
as safe aditives, ionizing radiation, and heat. Journal of
Food Protection 70: 1402–1409.Arroyo C, Cebrian G, Condon S and Pagan R. (2011).
Developmento of resistance in Cronobacter sakazakii
ATCC 29544 to thermal and nonthermal processes after
exposure to stressing environmental conditions. Journal ofApplied Microbiology 112: 561–570.
Arroyo C, Condon S and Pagan R. (2009).
Thermobacteriological characterization of Enterobactersakazakii. International Journal of Food Microbiology
136: 110–118.
Baranyi J, Roberts TA and McClure P. (1993). A non-auton-omous differential equation to model bacterial growth.
Food Microbiology 10: 43–59.
Boziaris IS and Adams MR. (2001). Temperature shock,injury and transient sensitivity to nisin in Gram negatives.
Journal of Applied Microbiology 91: 715–724.
Boziaris IS, Humpheson L and Adams MR. (1998). Effect ofnisin on heat injury and inactivation of Salmonella
Enteritidis PT4. International Journal of Food
Microbiology 43: 7–13.Burt SA, Fledderman MJ, Haagsman HP, van Knapen F and
Veldhuizen EJA. (2007). Inhibition of Salmonella enterica
serotype Enteritidis on agar and raw chicken by carvacrol
vapour. International Journal of Food Microbiology 119:
346–350.Carneiro de Melo AMS, Cassar CA and Miles RJ. (1998).
Trisodium phosphate increases sensitivity of Gram-nega-
tive bacteria to lysozyme and nisin. Journal of Food
Protection 61: 839–844.Conner DE. (1993). Naturally occurring compounds. In: PM
Davison and AL Branen (eds) Antimicrobials in Foods.
New York: Marcel Dekker, pp. 441–468.Crandall AD and Montville TJ. (1998). Nisin resistance of
Listeria monocytogenes ATCC70302 is a complex pheno-
type. Applied and Environmental Microbiology 64:
231–237.
Delves-Broughton J and Gasson MJ. (1994). Natural anti-
microbial systems for food preservation. In: Dillon VM
and Board RG (eds) Natural Antimicrobial Systems for
Food Preservation. Wallingford: Cab International,
pp. 99–131.
Delves-Broughton J, Williams GC and Wilkinson S. (1992).
The use of the bacteriocin, nisin, as a preservative in pas-
teurized liquid whole egg. Letters in Applied Microbiology
15: 133–136.Esteban MD and Palop A. (2011). Nisin, carvacrol and their
combinations against the growth of heat-treated Listeria
monocytogenes cells. Food Technology and Biotechnology
49: 89–95.
European Food Safety Authority. (2012). The European
Union summary report on trends and sources of zoonoses,
zoonotic agents and food-borne outbreaks in 2010. EFSA
Journal 10: 2597–3039.Harris LJ, Fleming HP and Klaenhammer TR. (1992).
Developments in nisin research. Food Research
International 25: 57–66.
Helander IM and Mattila-Sandholm TM. (2000).
Permeability barrier of the Gram negative bacterial outer
membrane with special reference to nisin. International
Journal of Food Microbiology 60: 153–161.Helander IM, Alakomi HL, Kyosti LK, Mattila-Sandholm T,
Pol IE, Smid EJ, et al. (1998). Characterisation of the
action of selected essential oil components on Gram-nega-
tive bacteria. Journal of Agriculture and Food Chemistry
46: 3590–3595.Holey RA and Patel D. (2005). Improvement in shelf-life and
safety of perishable foods by plant essential oils and smoke
antimicrobials. Food Microbiology 22: 273–292.
Humphrey TJ, Slater E, McAlpine K, Rowbury RJ and
Gilbert RJ. (1995). Salmonella enteritidis phage type 4 iso-
lates more tolerant to heat, acid, or hydrogen peroxide
also survive longer on surfaces. Applied and
Environmental Microbiology 61: 3161–3164.Jack RW, Tagg JR and Ray B. (1995). Bacteriocins of Gram-
positive bacteria. Microbiology and Molecular Biology
Reviews 59: 171–200.
Juven BJ, Kanner J, Schved F and Weisslowicz H. (1994).
Factors that interact with the antibacterial action of
thyme essential oil and its active constituent. Journal of
Applied Bacteriology 76: 626–631.Lagouri V, Blekas G, Tsimidou M, Kokkini S and Boskou D.
(1993). Composition and antioxidant activity of essential
oils from Oregano plants grown wild in Greece. Z
Lebensmittel-Untersuchung und Forschung A 197: 20–23.L’Ecuyer PB, Diego J, Murphy D, Trovillion E, Jones M,
Sham DF, et al. (1996). Nosocomial outbreak of gastro-
enteritis due to Salmonella Senftenberg. Clinical Infectious
Diseases 23: 734–742.
Lee JI, Lee HJ and Lee MH. (2002). Synergistic effect of nisin
and heat treatment on the growth of Escherichia coli
0157:H7. Journal of Food Protection 65: 408–410.Manas P, Pagan R, Alvarez I and Condon S. (2003). Survival
of Salmonella senftemberg 775W to current liquid whole
egg pasteurization treatments. Food Microbiology 20:
593–600.
Esteban et al.
363
Mendoza-Yepes MJ, Sanchez-Hidalgo LE, Maertens G and
Marin-Iniesta F. (1997). Inhibition of Listeria monocyto-
genes and other bacteria by plant essential oil (DMC) in
Spanish soft cheese. Journal of Food Safety 17: 47–55.Metrick C, Hoover DG and Farkas DF. (1989). Effects of
high hydrostatic pressure on heat-resistant and heat-sensi-
tive strains of Salmonella. Journal of Food Science 54:
1547–1549.Munoz-Cuevas M, Metris A and Baranyi J. (2011). Predictive
modelling of Salminella: from cell-cycle measurements to
e-models. Food Research International DOI:10.1016/
j.foodres.2011.04.033.Nychas GJE. (1995). Natural antimicrobials from plants.
In: Gould GW (ed.) New Methods of Food Preservation.
London: Blackie Academic Professional, pp. 58–89.
Periago PM and Moezelaar R. (2001). Combined effect of
nisin and carvacrol at different pH and temperature
levels on the viability of different strains of Bacillus
cereus. International Journal of Food Microbiology 68:
141–148.
Periago PM, Delgado B, Fernandez PS and Palop A. (2004).
Use of carvacrol and cymene to control growth and via-
bility of Listeria monocytogenes cells and predictions of
survivors using frequency distribution functions. Journal
of Food Protection 67: 1408–1416.
Periago PM, Palop A and Fernandez PS. (2001). Combined
effect of nisin, carvacrol and thymol on the viability of
Bacillus cereus heat-treated vegetative cells. Food Science
and Technology International 7: 487–492.Periago PM, van Schaik W, Abee T and Wouters JA. (2002).
Identification of proteins involved in the heat stress
response of Bacillus cereus ATCC 14579. Applied and
Environmental Microbiology 68: 3486–3495.
Pol IE and Smid EJ. (1999). Combined action of nisin andcarvacrol on Bacillus cereus and Listeria monocytogenes.Letters in Applied Microbiology 29: 166–170.
Rattanachaikunsopon P and Phumkhachorn P. (2010).Synergistic antimicrobial effect of nisin and r-cymeneon Salmonella enterica serovar Thiphy in vitro andready-to-eat food. Bioscience, Biotechnology and
Biochemistry 74: 520–524.Ray B. (1992). Nisin of Lactococcus lactis ssp. lactis as food
biopreservative. In: Ray B and Daeschel MA (eds) Food
Biopreservatives of Microbial Origin. Boca Raton: CRCPress, pp. 207–264.
Rushdy AA, Stuart JM, Ward LR, Bruce J, Threlfall EJ,
Punia P, et al. (1998). National outbreak of SalmonellaSenftenberg associated with infant food. Epidemiologyand Infection 120: 125–128.
Sikkema J, de Bont JA and Poolman B. (1994). Interactionsof cyclic hydrocarbons with biological membranes.Journal of Biological Chemistry 269: 8022–8028.
Smelt JPPM, Otten GD and Bos AP. (2002). Modelling the
effect of sublethal injury on the distribution of the lagtimes of individual cells of Lactobacillus plantarum.International Journal of Food Microbiology 73: 207–212.
Stevens KA, Klapes NA, Sheldom BW and KlaenhammerTR. (1991). Nisin treatment for the inactivation ofSalmonella species and other Gram-negative bacteria.
Applied and Environmental Microbiology 57: 3613–3615.Ultee A, Gorris LGM and Smid EJ. (1998). Bactericidal
activity of carvacrol towards the food-borne pathogenBacillus cereus. Journal of Applied Microbiology 85:
211–218.Ultee A, Slump RA, Stering G and Smid EJ. (2000).
Antimicrobial activity of carvacrol towards Bacillus
cereus on rice. Journal of Food Protection 63: 620–624.
Food Science and Technology International 19(4)
364
5.5. CAPITULO V: “Evaluación de la viabilidad de Listeria
monocytogenes expuesta a calor y antimicrobianos naturales
mediante citometría de flujo”
Este capítulo se corresponde con el siguiente artículo, que está siendo preparado para su
envío a una revista incluida en el Science Citation Index:
Esteban, M.-D., Ros-Chumillas, M., Huertas, J.P. y Palop, A. Assesment of viability of
Listeria monocytogenes exposed to heat and natural antimicrobials by flow cytometry.
Además de conocer el efecto de los distintos agentes antimicrobianos investigados,
así como de sus combinaciones, sobre distintos microorganismos, y de poder
cuantificarlos y predecirlos mediante el empleo de diferentes modelos matemáticos, otro
de los objetivos planteados en esta Tesis Doctoral era el de tratar de desvelar los
mecanismos de acción de dichos agentes. Para ello se disponía de la técnica de la
citometría de flujo que, junto con el empleo de fluorocromos, permite distinguir entre
subpoblaciones de microorganismos según su estado fisiológico. El estudio se planteó
sobre las células vegetativas de Listeria monocytogenes y de Salmonella sometidas a
tratamientos térmicos en presencia o no de compuestos antimicrobianos, si bien en este
capítulo únicamente se exponen aquellos resultados obtenidos con la primera especie.
Los resultados mostraron mecanismos de acción netamente distintos para el calor y
para los compuestos antimicrobianos. Mientras que en el caso de los antimicrobianos,
nisina y carvacrol, se podía correlacionar el porcentaje de células dañadas (evidenciadas
mediante citometria de flujo) con el descenso de los recuentos en placa, en el caso del
tratamiento térmico, dicho descenso de los recuentos no se acompañaba del
correspondiente aumento de células dañadas. En cualquier caso, estos resultados ponen
de manifiesto la utilidad de la citometría de flujo como técnica rápida que permite,
además de cuantificar poblaciones, detectar diferencias en los mecanismos de acción.
122
Assessment of viability of Listeria monocytogenes exposed to heat and natural
antimicrobials by Flow Cytometry
Maria-Dolores Esteban1, María Ros-Chumillas1, Juan-Pablo Huertas1 and Alfredo Palop1,2*
Departamento de Ingeniería de Alimentos y del Equipamiento Agrícola, Campus de Excelencia
Internacional Regional "Campus Mare Nostrum", Universidad Politécnica de Cartagena, Paseo Alfonso
XIII 48, 30203 Cartagena, Murcia, Spain
ABSTRACT
Flow cytometry (FCM) analysis provides high-speed information at real time on damage at
single cell level. The application of mild inactivation treatments follows with the adition of nisin
and carvacrol on exponential and stationary Listeria monocytogenes cells. The aim of this
research was to explore the effect of the combination of nisin and/or carvacrol with a previous
heat treatment in stationary and exponential cells. Experiments were carried out in a flow
cytometry and cells labelled with a Backlight kit containing SYTO9 and propidium iodide (PI).
This dual stained allows us to know the mode of action of different treatments. The FCM
analyses were in agreement with classical viable plate count, although were not directly
correlated. Listeria monocytogenes heat-treated and recovery in TSA supplemented with NaCl
shown a subletahl injury.
1. Introduction
Several foodborne disease outbreaks,
which have caused severe and often
fatal infections in susceptible human
hosts, have been linked to Listeria
monocytogenes (Ryser & Marth, 2007).
Heat inactivation is one of the most
frequently used preservation techniques
to extend the shelf life of food products.
Lately, an increased interest in mild
heat treatments is observed because the
consumers’ demand for higher quality
food products. Moreover, these products
should be free of chemical additives. L.
monocytogenes is one of the most heat-
resistant non-spore-forming pathogenic
microorganisms present in food
(Hansen & Knøchel, 2001). In order to
decrease the intensity of thermal
treatments, combined processes, such as
those consisting in the application of a
mild heat treatment previous to the
addition of natural antimicrobials, have
been studied (Esteban & Palop, 2011).
Traditionally, the determination of the
impact of these treatments on
microorganisms was assessed through
the use of viable plate count methods. In
these methods viability is defined as the
ability to reproduce and form a visible
colony. Nevertheless, this classic
culture technique does not give any
information about the changes induced
on cellular integrity or metabolic
activities as well as differences in a
population (Ananta & Knorr, 2009).
Flow cytometric analysis is a very
valuable method, which enables
simultaneous evaluation of multiple
cellular parameters, both structural and
functional, on microorganisms. Flow
cytometry is a rapid technique that has
been applied for evaluating biological
threats, water cleanliness, processed
meat hygiene or the efficacy of
antiseptics or bacteriocins (Berney,
Weilenmann, Ihssen, Bassin & Egli,
2006a; Berney, Weilenmann, Simonetti
& Egli, 2006b; Boulos, Prevost,
Barbeau, Coallier & Desjardins, 1999).
Flow cytometric methods for assessing
cell viability frequently use one or more
fluorescent probes for parameters such
123
as membrane integrity, enzymatic
activity, nucleic acid content, and
membrane potential. In general, two or
more probes are used simultaneously. It
is desirable to combine a probe that is
positive for a vital parameter (e.g.
enzymatic activity) with one that is
negative for another (e.g. membrane
integrity) (Hernlem & Hua, 2010).
Baclight is a mixture of two stains,
propidium iodide (PI), which is a red
intercalating stain that is membrane
impermeant and is therefore excluded
by healthy cells, binding only dead
cells, and SYTO 9, which is a green
intercalating membrane permeant stain
and will stain all cells, provided they
contain nucleic acid. The manufacturers
argue that, when the two stains are
present within a cell, PI has a stronger
affinity for nucleic acid than SYTO9,
which will be displaced from nucleic
acid and the cells will fluoresce in red
(Stocks, 2004). When BacLight is
compared to traditional viable plate
count methods, good correlations are
frequently found, at least for single
species (Berney, et al., 2006a; Boulos,
et al., 1999). Moreover, it can
advantageously report viable but non-
culturable cells as live and therefore
correctly identifies them as potentially
harmful (Rigsbee, Simpson, & Oliver,
1997)
The aim of this study was to assess, by
means of flow cytometry, the viability
of stationary and exponential heat-
treated Listeria monocytogenes cells
subsequently exposed to different
concentrations of nisin and/or carvacrol.
2. Material and methods
2.1. Bacterial strains and culture
conditions
The strain used in this experiment was
Listeria monocytogenes Scott A NCTC
11994 kindly supplied by Institute of
Food Research. For stationary cells a
loop of the deep frozen glycerol tube
was taken and transferred into a 5 mL
Tryptic Soy Broth with 0.6% of yeast
extract (TSBYE) (Scharlau Chemie,
Barcelona, Spain), and incubated for 6-
8 hours at 37ºC. From this culture 50
µL were subcultured in 50 mL of
TSBYE in a 250 mL Erlenmeyer culture
flask at 37ºC (200 rpm) for 18 h. After
this incubation time, cells were at their
stationary phase of growth, at a final
concentration of approximately109
cells/mL. For exponential cells, 100 µL
from the overnight culture were
transferred into 50 mL into a TSBYE
250 mL Erlenmeyer culture flask at
37ºC (200 rpm) for 3 h. After this
incubation time, cells were at their
exponential phase of growth, at a
concentration of approximately106
cells/mL. Working cultures were then
aliquoted, one of which served as the
nonthermal control culture and the other
was subjected to a heat treatment.
To prepare the samples for flow
cytometry analyses, both cultures,
stationary and exponential, were
centrifuged at 3500 rpm twice and
washed with phosphate buffered saline
(PBS; Panreac, Barcelona, Spain). For
stationary cells, the first time, the pellet
was resuspended in the same volume of
PBS (50 mL) and the second one in 2
mL of PBS and put on ice before being
used. 250 µL of this suspension was
added to 50 mL of PBS at a final
O.D.680nm of 0.2, which corresponds to a
final concentration of approx. 106
cfu/mL. For exponential cells, the pellet
was resuspended both times in the same
volume of PBS (50 mL) with a final
O.D.680nm of 0.2, which corresponds to a
final concentration of 106 cfu/mL.
2.2. Chemicals
124
Nisin and carvacrol (both from Sigma-
Aldrich Chemie, Steinheim, Germany)
stock solutions (0.3 mM and 0.5 M,
respectively) were made in 95 %
ethanol and stored at 4 °C.
2.3. Heat treatment
A previous mild heat treatment of 15
min at 55 °C was selected as it results in
a sublethal injury. This heat treatment
was applied to both, stationary and
exponential cultures, grown in TSBYE
at 37 °C, by placing the test tube in a
preheated water bath (Frimengruppe
Press- Daimier, Dresden, Germany).
Plate counts in Tryptic Soy Agar (TSA)
(Scharlau Chemie) of the appropriate
dilutions in buffered peptone water
(BPW) (Scharlau Chemie) were
performed before and after the thermal
treatment, in order to check the extent
of the achieved inactivation. Plates were
incubated for 48 h at 37 °C.
2.4. Effect of antimicrobials in the
destruction of L. monocytogenes
The different concentrations of
antimicrobial tested (0.13 µM nisin,
0.66 mM carvacrol and 0.13 µM nisin
+ 0.66 mM carvacrol ) were added to 5
mL PBS of 106 cfu/mL each culture,
stationary or exponential, heat treated or
not and were incubated at room
temperature for 15 minutes.
2.5. Flow cytometry
Flow cytometry (FCM) was used to
assess antilisterial activity of nisin and
carvacrol and their possible additive or
synergistic effect when they were
combined and the influence of a
previous heat treatment.
Cells of L. monocytogenes pre-heated or
not, placed in 5 mL PBS tubes after
being incubated in the presence of the
different concentrations tested (0, 0.13
µM nisin, 0.66 mM carvacrol and 0.13
µM nisin + 0.66 mM carvacrol), were
stained with a Baclight kit (Molecular
Probes, Leiden, The Netherlands).
Samples of 1 mL were aliquoted in 1mL
Eppendorf and then were centrifuged at
3000rpm and resuspended in and
analyzed by flow cytometry.
Flow cytometry was performed with a
FACSCalibur flow cytometer (Becton-
Dickinson) with a 488-nm excitation
laser, using CellQuest Pro software
(Becton-Dickinson) for data acquisition
and analysis. The FCM analyses were
performed with the following detector
settings: FSC, E03; SSC, 400; FL1,
400; FL3, 400 using logarithmic gains.
The threshold was set at an SCC signal
of 67. FCM samples were adjusted to an
event rate of 1,000 cells per second and
a total of 10,000 events were registered
per sample.
2.6. Viable plate counts
In addition, viable plate counting, as a
traditional method to assess viability,
was used.
One sample of each condition tested
was taken, and plate counts in TSA of
the appropriate dilutions in BPW were
performed. Plates were incubated for 48
h at 37 °C.
2.7. Detection of sublethal injury
In order to determine microbial cell
injury, treated samples were also plated
onto TSA+YE containing 5% NaCl
(Panreac). Plates were incubated for 48
h at 37 °C. Previous experiments
showed that longer incubation times did
not influence in survival counts.
4. Results
125
Bacterial viability analyses by FCM
were performed by dual staining with
SYTO9 and PI of L. monocytogenes.
Cells treated and stained revealed three
different cell populations, living,
compromised and dead. The
compromised cells were those stained
with both stains as previously described
(Hernlem, & Hua, 2010).
Microbial inactivation by combining
nisin and/or carvacrol and a previous
heat treatment on stationary L.
monocytogenes cells
The exposure of L. monocytogenes
stationary cells to 0.13 µM of nisin
during15 min in PBS at 37ºC showed an
inhibitory effect, decreasing the
population from a 96 % to a 3% in the
upper right quadrant. The increasing
population in upper left quadrant
indicated that a certain percentage of
cells were becoming compromised.
These cells are not dead but they allow
PI diffusion into their cytoplasm. This
decrease in viable population is in
relationship with a decrease of more
than 1 cycle log in agar plate counts.
The exposure to 0.66 mM carvacrol led
to very different results.The population
percentage in the upper right quadrant
remained approx. similar (Fig. 1C), so
no decrease in viable cells or increase in
compromised cells was detected.
When both antimicrobials were added
together, a reduction of a 4 % was
found in live population (Fig. 1D). A
light synergistic effect was then
observed when both nisin and carvacrol
were present at the same time, since the
combined effect led to a further
reduction than the addition of the
separated effects. On the other hand, no
compromised cells after exposition to
this combination of antimicrobials were
observered. This same light decrease in
the counts was observed when nisin and
carvacrol were added simultaneously.
A
Figure1. Fluorescence density plots of L. monocytogenes stationary cells stained with SYTO9
and PI after been exposed to nisin (A), carvacrol(B), nisin and carvacrol(C), previous heat
treatment and nisin, carvacrol and a previous heat treatment(F).
A B C
D E F
126
The application of a previous thermal
treatment of 55ºC for 15 min led to
similar results than carvacrol alone: no
decrease in viable cells or increase in
compromised cells was detected,
suggesting that no effect was found
(Fig. 1E). According to counts, a
decrease of less than 1 cycle log was
observed.
However, when both antimicrobials,
nisin and carvacrol, were added to
previously heat treated L.
monocytogenes cells a further
synergistic effect was shown, leading to
a complete inactivation of the
population.
Microbial inactivation by combining
nisin and/or carvacrol and a previous
heat treatment on exponential L.
monocytogenes cells
The addition of 0.13 µM nisin headed to
a similar effect on L. monocytogenes
exponential cells than that found in
stationary cells, since only the 4% of the
population remained still alive (Fig.
2A).
According to counts, a 3 log cycle
reduction was found when nisin was
added to exponential cells, opposite to
the 1 log reduction for stationary cells.
Nevertheless, carvacrol showed more
effect for exponential than for stationary
cells, reducing the live population in a
40% for exponential cells. Still, no
decrease was shown in counts (Table1).
What is more, the effect of the heat
treatment was higher for exponential
cells too, decreasing the population in
45%, whereas for stationary cells only
decreased the live population in 12%
(Fig. 2). Contradictory, counts were
only reduced in nearly 1 cycle log was
observed.
When the three treatments were
combined complete inactivation of
exponential cells was also shown.
Occurrence of sublethal injury after
treatmens on Listeria monocytogenes
stationary cells
B C
Figure2. Fluorescence density plots of L. monocytogenes exponential cells stained with
SYTO9 and PI after been exposed to nisin (A), carvacrol(B), nisin and carvacrol(C), previous
heat treatment and nisin, carvacrol and a previous heat treatment(F).
A B C
D E F
127
No differences between counts of L.
monocytogenes stationary cells treated
with nisin and with carvacrol alone
were found by comparing data obtained
with selective and nonselective media.
When 0.13 µM of nisin was added, 1.5
cycle of inactivation in both selective
and nonselective medium was observed.
These results are quite close to the 90%
reduction in live cells shown by FCM.
On the other hand, a high proportion of
sublethaly injured cells was seen when
L. monocytogenes was heated at 55ºC
for 15 minutes. In this case, on FCM
results, no increase in compromised
cells was observed.
4. Discussion
Nisin pore formation involves the local
perturbation of the bilayer structure and
a membrane potential-dependent or pH
gradient- dependent reorientation of
these molecules from a surface-bound
into a membrane-inserted configuration.
The efflux of cellular constituents
results in a complete collapse of the
proton motive force (Abee,
Klaenhammer, & Letelier, 1994;
Verheul, Russel, Hoff, Pombouts, &
Abee, 1997). Different methods have
probed that nisin permeabilizes the
cytoplasmic membrane by forming
pores in the membrane, resulting in a
rapid efflux of small molecules, with
agar assays and enumeration of viable
microorganisms as the most commonly
used techniques (Lehtinen, Nuutila, &
Lilius, 2004; Crandall, & Montville,
1998; Delves-Broughton, & Gasson,
1994; Ray, 1992). Moreover, methods
based in ATP changes, intracellular pH,
and membrane potentials have also been
applied in order to evaluate the effect of
several bacteriocins (Shapiro, 2000;
Novo, Perlmutter, Hunt, & Shapiro,
1999).
Many authors have investigated the
mechanism of action of essential oils.
Most of them agree that carvacrol, and,
in general essential oils are hydrophobic
compounds, which primary site of
toxicity is the membrane. They
accumulate in the lipid bilayer
according to a partition coefficient that
is specific for the compound applied,
leading to disruption of the membrane
structure and function (Helander,
Alakomi, &Latva-Kala, 1998; Juven,
Kanner, Schved, & Weisslowicz, 1994;
Sikkema, De Bont, & Poolman, 1994).
A critical concentration of the essential
oils is needed to cause leakage of
cellular constituents (Mendoza-Yepes,
Sanchez-Hidalgo, Maertens, & Marin-
Iniesta, 1997). However, our results
showed no decrease in viable
population for L. monocytogenes
stationary cells, which were coupled
with a no decrease in counts when 0.66
mM carvacrol was added.
When nisin and carvacrol were added
simultaneously a light synergistic
effects was found. The different modes
of action for nisin and carvacrol could
explain, at least in part, the synergistic
effect observed. Esteban & Palop, 2011
found synergistic effect on L.
monocytogenes showing an even
bactericidal effect. Pol, van Arendonk,
Mastwijk, Krommer, Smid, &
Moezelaar, 2001 also found synergistic
effects in the combination of nisin and
carvacrol in germinating spores of
Bacillus cereus.
The heat treatment of 55ºC during 15
minutes reduced the population in 1
cycle log, but did not affect the
membrane integrity, since PI could not
pass into L. monocytogenes cells, so the
population after heat treatment
remained still stained by SYTO9 (Fig.
X). These results are in agreement with
dose obtained by Ananta et al. (2009)
who, after applying a heat treatment that
128
reduced the population in 6 log cycles,
only found that as many as 4.5% of the
whole population was stained with PI.
Published data have shown that
bacteriocins and phenolic compounds
present additive or even synergistic
inactivation effects in combination with
other technologies as a previous heat
treatment (Esteben & Palop, 2011) or
high hydrostatic pressure treatments
(Garriga, Aymerich, Costa, Monfort, &
Hugas, 2002; Masschalk, García-
Graells, van Haver, & Michiels, 2000;
Vurma, Chung, Shelhammer, Turek, &
Yousef, 2006). Our outcomes are in
agreement with these authors: the
combination of a previous heat
treatment with the presence of nisin and
carvacrol showed a bactericidal effect
against L. monocytogenes cells (Figure
1).
Our results show than stationary cells
are more resistant to the different
treatment than exponential cells (Fig. 1
and 2). These outcomes are in
agreement with those found by Mañas
& Mackey (2004), in which exponential
cells were inactivated under high
pressure by irreversible damage to the
cell membrane. In contrast, stationary
cells had a robust enough membrane to
withstand pressurization up to very
intense treatments. These authors
concluded that this capacity of
stationary cells to maintain an intact
membrane had to be related to their
ability to repair gross changes in
cellular structures. In our case, the
enhanced loss of viability of
exponential cells was shown by the
increased uptake of PI by cells treated
with carvacrol and heat treated (Fig. 1
and 2 respectively) that is quite higher
for exponential than for stationary cells
(Fig. 1).
The fact that the counts for exponential
cells are not in correlation with the
FCM results for the case of nisin could
be explained on one hand with the
sensibility of the cytometer due to the
fact that a minimum concentration of
105 cfu/mL are necessary to be detected,
so a decrease of 3 cycle log in the plate
counts and only a 6% of difference in
live population would be explain. On
the other hand, Chawla, Chen, &
Donnelly (1996) found that a Listeria
population containing as many as 99.8%
injured cells can repair completely and
grow under favourable conditions. Our
outcomes agree with these researches,
since, a decrease in live population of a
40% of the population of L.
monocytogenes exponential cells
became compromised, although, there
was no decrease in plate counts was
found. The fact that PI would pass
through membrane and bind DNA could
be explained by both, the membrane
fluidity due to the portion of unsaturated
fatty acids in the membrane or to the
capacity of carvacrol of disrupting
membrane, which should be big enough
to allowed PI to pass, but not to kill
cells, allowing even the cells to grow in
agar plates. In order to check the ability
of carvacrol to form pores, higher
concentration and longer incubation
time were tested and up to 4 cycle log
reduction were found in the counts after
incubating L. monocytogenes
exponential cells with a concentration
of 132 mM carvacrol for 24h at 37ºC
(data not shown). Ultee, Gorris, & Smid
(1998) found that the antimicrobial
activity of carvacrol was dependent on
the concentration tested, as well as on
exposure time, pH and temperature for
Bacillus cereus. Sikkema, Bont, &
Poolman (1994) and Enonto (1991),
found that a change in the composition
of the cell membrane as a result of
altered partition charactersistics of the
lipophilic compound (carvacrol) may
have affected the sensitivity.
129
According to sublethal injury after the
adition of nisin to L. monocytogenes
stationary cells, FCM results shown that
antimicrobial compound forms pores in
the membrane which allows to PI to
pass through and bind DNA, replacing
SYTO9 and staining compromised
cells.
According to our results a decrease in
cell viability would not led to an uptake
of PI. Something similar occured to
Ananta et al. (2009), who found that
cells reached the thermal death in
absence of membrane degradation.
Bunthof, van der Braack, Breeuwer,
Rombouts, & Abee, (1999) also
demonstrated that heat treated
Lactococcus lactis cells, as much as
69% were not PI labeled, although these
cells could not be recovered on plates.
5. Conclusion
The ability of heat injured L.
monocytogenes to repair sublethal
damage in different environments is of
great interest for the food industry.
Many published reports have
demonstrated the occurrence of
sublethal injured after heat treatment
using a differential plating technique.
Due to the fact that heat treatment may
enhance sensibility to natural
antimicrobials, a combined process
should be developed.
Fluorescence intensity is the most
sensitive measure of bacteriocin
activity, since is possible to observe a
decrease in the fluorescence intensity
before detecting a decrease in the plate
counting. Within the area of bacteriocin
research, flow cytometry has potencial
as a powerful for the investigation of
cell membrane damage and repair
mechasisim.
Other authors have concluded that
specific changes related to membrane
integrity associated with exponential
cells are correlated with the loss of
viability of these cells. From our data
we can concluded that this loss of
membrane integrity makes exponential
cells be more sensitive to carvacrol and
heat treatment than stationary cells are,
due to the ability of stationary cells to
repair membranes damages.
Acknowledgements
This research was financially supported
by the Ministry of Science and Technology
of the Spanish Government and European
Regional Development Fund (ERDF)
through Projects AGL-2006-10280 and
AGL-2010-19775. M.D. Esteban is grateful
to the Ministry of Science and Technology
for offering her the fellowship BES 2007–
15471.
References
Abee, T., Klaenhammer, T.R., &
Letelier, L. (1994). Kinetic studies of
the action of lactacin F, a
bacteriocin produced by Lactococcus
johnsonii that forms poration complexes
in the cytoplasmic membrane. Applied
and Environmental Microbiology, 60,
1006-1013.
Ananta, E. & Knorr, D. (2009).
Comparison of inactivation pathways of
thermal and high pressure inactivated
Lactobacillus rhamnosus ATCC 53103
by flow cytometry analysis. Food
microbiology, 26, 542-546.
Berney, M., Weilenmann, H.U., Ihssen,
J., Bassin, C., & Egli, T. (2006a).
Specific growth rate determines the
sensitivity of Escherichia coli to termal,
UVA, and solar disinfection. Applied
and Environmental Microbiology, 72,
2586-2593.
Berney, M., Weilenmann, H.U.,
Simonetti & Egli, T. (2006b). Efficacy
of solar disinfection of Escherichia coli,
Shigella flexneri, Salmonella
130
typhimurium and Vibrio cholerae.
Journal of Applied Microbiology, 101,
828-836.
Boulos, L., Prevost, M., Barbeau, B.,
Coallier, J., & Desjardins, R. (1999).
LIVE/DEAD BacLight: application of a
new rapid staining method for direct
enumeration of viable and total bacteria
in drinking water. Journal Microbiology
Methods, 101, 828-836.
Bunthof, C.J., van der Braack, S.,
Breeuwer, O., Rombouts, F.M. & Abee,
T. (1999). Rapid fluorescence
assessment of the viability of stressed
Lactococcus lactis. Aplied and
Environmental microbiology, 65, 3681-
3689.
Chawla, C.S., Chen, H., & Donnelly
(1996). Mathematecally modeling the
repair of heta-injured Listeria
monocytogenes as affected by
temperature, pH, and salt concentration.
International Journal of Food
Microbiology, 30, 231-242.
Crandall, A.D., & Montville, T.J.
(1998). Nisin resistance of Listeria
monocytogenes ATCC700302 is a
complex phenotype, Applied and
Environmental Microbiology, 64, 231–
237.
Delves-Broughton, J. & Gasson, M.J.
(1994): Nisin. In: Natural antimicrobial
systems and food preservation. Dillon,
V.M., & Board, R.G. (Eds.). CAB
International, Wallingford, UK, pp. 99–
131.
Helander, I.M., Alakomi, H.L.,
& Latva-Kala,
K. (1998). Characterisation of the action
of selected essential oil components on
Gram-negative bacteria. Journal of
Agricultural and Food
Chemistry, 46, 3590–3595.
Esteban, M.D. & Palop, A. (2011).
Nisin, carvacrol and their combinations
against the growth of heat-treated
Listeria monocytogenes cells. Food
Technology and Biotechnology, 49, 89–
95.
Garriga, M., Aymerich, M.T., Costa, S.,
Monfort, J.M. & Hugas, M. (2002).
Bactericidal synergism through
bacteriocins and high pressure in a meat
model system during storage. Food
microbiology, 19, 509-518.
Hansen, T.B. & Knøchel, S. (2001).
Factors influencing resuscitation and
growth of heat injured Listeria
monocytogenes 13–249 in sous vide
cooked beef, International Journal of
Food Microbiology, 63, 135– 147.
Hernlem, B. & Hua, S-S. (2010). Dual
fluorochrome flow cytometric
assessment of yeast viability. Current
Microbiology, 61, 57-63.
Juven, B.J., Kanner, J., Schved, F., &
Weisslowicz, H. (1994). Factors that
interact with the antibacterial action of
thyme essential oil and its active
constituent. Journal of Applied
Bacteriology, 76, 626-631.
Lehtinen, J., Nuutila, J., & Lilius, E-M.
(2004). Green fluorescence protein-
propidium iodide (GFP-PI) based assay
for flow cytometric measurement of
bacterial viability, Cytometry, 60, 165-
172.
Mañas, P., & Mackey B.M. (2004).
Morphological and physiological
changes induced by high hydrostatic
pressure in exponential- and stationary-
phase cells of Escherichia coli:
Relationship with Cell Death. Applied
and Environmental Microbiology, 70,
1545-1554
Masschalk, M., García-Graells, C., van
Haver, E., & Michiels C.W. (2000).
Inactivation of high pressure resistant
Escherichia coli by lysozyme and nisin
under high pressure. Innovative Food
Science and Emerging Technologies, 1,
39-47.
Mendoza-Yepes, M.J., Sanchez-
Hidalgo, L.E., Maertens, G., & Marin-
Iniesta, F. (1997). Inhibition of Listeria
131
monocytogenes and other bacteria by a
plant essential oil (DMC) in Spanish
soft cheese. Journal of Food Safety, 17,
47-55.
Novo, D., Perlmutter, N.G., Hunt, R.H.,
& Shapiro, H.M. (1999). Accurate flow
cytometric membrane potential
measurement in bacteria using
diethyloxacarbocyanine and a
ratiometric technique. Cytometry, 35,
55-63.
Pol, I.E. & Smid, E.J. (1999).
Combined action of nisin and carvacrol
on Bacillus cereus and Listeria
monocytogenes. Letters in Applied
Microbiology, 29, 166–170.
Pol, I.E., van Arendonk, W.G.C.,
Mastwijk, H.C., Krommer, J., Smid,
E.J., & Moezelaar, R. (2001).
Sensitivities of germinating spores and
carvacrol-adapted vegetative cells and
spores of Bacillus cereus to nisin and
pulsed-electric-field treatment. Applied
and Environmental Microbiology, 67,
1693–1699.
Ray, B. (1992): Nisin of Lactococcus
lactis ssp. lactis as Food
Biopreservative. In: Food
biopreservatives of microbial origin,
Ray, B. & Daeschel, M.A. (Eds.), CRC
Press, Boca Raton, FL, USA, pp. 207–
264.
Rigsbee, W., Simpson, L.M. & Oliver,
J.D. (1997). Detection of the viable but
non-culturable state in Escherichia coli
O157:H7. Journal of Food Safety, 16,
255-262.
Ryser, E.T. & Marth, E.H. (2007).
Listeria, Listeriosis, and Food Safety,
CRC Press, Boca Raton, FL, USA.
Shapiro, H.M. (2000). Membrane
potential estimation by flow cytometry.
Methods, 21, 271-279.
Sikkema, J., De Bont, J.A.M., &
Poolman, B. (1994). Interactions of
cyclic hydrocarbons with biological
membranes. Journal of Biological
Chemistry, 269, 8022-8028.
Stocks. S. M. (2004). Mechanism and
use of the commercially aviable
viability stain, Baclight. Cytometry A,
61, 189-195.
Ultee, A., Gorris, L.G.M., & Smid, E.J.
(1998). Bactericidal activity of
carvacrol towards the food-borne
pathogen Bacillus cereus. Journal of
Applied Microbiology, 85, 211-218.
Verheul, A., Russel, N.J., Hoff, R.R.,
Pombouts, F.M., & Abee, T. (1997).
Modifications of membrane
phospholipid composition in nisin-
resistant Listeria monocytogenes Scott
A. Applied and Environmental
Microbiology, 63, 3451-3457.
Vurma, M., Chung, Y.-K., Shelhammer,
T.H., Turek, E.J., & Yousef, A. E.
(2006). Use of phenolic compounds for
sensitizing Listeria monocytogenes to
high pressure processing. International
Journal of Food Microbiology, 106,
263-269.
132
6. CONCLUSIONES
1. Las características del medio de calentamiento afectan significativamente a
la termorresistencia de Bacillus sporothermodurans. El valor D120 se redujo a la
tercera parte al reducir el pH del medio de 7 a 3. Además, los valores obtenidos en la
crema de calabacín (pH 6,3) fueron similares a aquéllos obtenidos a pH 7.
2. En condiciones isotérmicas, las curvas de supervivencia de B.
sporothermodurans mostraron fenómeno de hombro y se ajustaron adecuadamente
con los modelos no lineales de Weibull y Geeraerd.
3. Velocidades de calentamiento de 1 y 10ºC/min no afectan a la resistencia al
calor de este microorganismo. Para estos tratamientos las predicciones de
supervivientes, basadas en los modelos de Weibull y Geeraerd, se ajustaron
adecuadamente a los datos experimentales.
4. En condiciones no isotérmicas de enfriamiento los modelos sólo ajustan bien
para velocidades de 10ºC/min. En el caso de 1ºC/min, los microorganismos son más
resistentes de lo predicho por los modelos.
5. La adición de timol al medio de calentamiento tiene un efecto pequeño o
inexistente en la termorresistencia de esporos de Bacillus. El mayor efecto se
observó en B. licheniformis, cuyos valores D100ºC disminuyeron de 2,86 a 2,06 minutos
cuando se añadió una concentración 0,5 mM de timol al medio de calentamiento.
6. La adición de timol al medio de recuperación presenta un efecto dosis
dependiente sobre la termorresistencia de todos los microorganismos estudiados.
Se han desarrollado modelos matemáticos que permiten predecir el efecto de la
concentración de timol en el medio de recuperación. El mayor efecto se observó en
Bacillus subtilis AdHC1 que presentó un valor ztimol = 3.14.
7. La combinación de timol en los medios de calentamiento y recuperación no
tiene un efecto significativo sobre la termorresistencia de B. licheniformis ni B.
subtilis CECT 4071.
136
8. En condiciones no isotérmicas de calentamiento, el número de
supervivientes de B. subtilis AdHC1 es inferior al esperado cuando se añade timol
al medio de recuperación.
9. La nisina tiene un efecto pequeño sobre el crecimiento en caldo de L.
monocytogenes, Salmonella Enteritidis y Salmonella Senftenberg. La fase de latencia
aumentó de 13,84 a 17,03 horas para L. monocytogenes cuando se añadió 0,13 M de
nisina. En el caso de ambas cepas de Salmonella no varió incluso a la concentración
más alta ensayada (1,2 M). La velocidad de crecimiento se redujo ligeramente para los
tres microorganismos.
10. El carvacrol muestra un efecto significativo sobre el crecimiento en caldo de
Salmonella Enteritidis y Salmonella Senftenberg, doblando casi el tiempo necesario
para alcanzar la fase estacionaria cuando se añadió una concentración 0.77mM. En el
caso de L. monocytogenes, el carvacrol mostró un efecto dosis dependiente, que se
pudo predecir mediante modelos matemáticos secundarios sencillos.
11. La combinación de nisina y carvacrol con un tratamiento térmico previo
muestra un efecto sinérgico sobre el crecimiento de Listeria monocytogenes en
caldo y zumo de zanahoria y un efecto aditivo sobre el crecimiento de Salmonella
Enteritidis y Salmonella Senftenberg en caldo. Una combinación de 0,13 M nisina y
0,11 mM carvacrol fue capaz de inhibir el crecimiento en caldo de L. monocytogenes,
expuestas previamente a un tratamiento térmico de 15 minutos a 55ºC, durante al menos
15 días.
12. La citometria de flujo es una técnica rápida que permite, además de
cuantificar subpoblaciones según su estado fisiológico, detectar a que nivel se
produce el daño causado por el agente en cuestión.
137
Los tratamientos y modelos utilizados en esta Tesis Doctoral evidencian la
posibilidad de desarrollar y optimizar tratamientos térmicos combinados con
antimicrobianos naturales, que permitan a la industria alimentaria obtener
productos seguros y de mayor calidad.
138
7. CONCLUSIONS
1. The heat resistance of Bacillus sporothermodurans is significantly affected
by the medium characteristics. D120 value was decreased down to one third when the
medium pH was reduced from 7 to 3. The D values in a courgette puree (pH 6.3) were
similar to those obtained at pH 7.
2. Under isothermal heating conditions, B. sporothermodurans survival curves
showed shoulders and were accurately predicted using Weibull and Geeraerd non-
linear models.
3. The heat resistance of B. sporothermodurans is not affected by heating rates
of 1 and 10ºC/min. Survivors after these treatments were accurately predicted using
Weibull and Geeraerd models.
4. Under non-isothermal cooling conditions, models only predicted accurately
for 10ºC/min rates. For 1ºC/min rates, survivors were underestimated.
5. The addition of thymol to the heating medium has a slight or non-existing
effect in the heat resistance of Bacillus spores. The greatest effect was observed for
Bacillus licheniformis, which D100ºC values decreased from 2.86 to 2.06 minutes
when0.5 mM thymol was added to the heating medium.
6. The addition of thymol to the recovery medium has a dose-dependent effect
in the heat resistance of all the microorganisms tested. Mathematical models were
developed in order to predict the effect of the thymol concentration in the recovery
medium. The greatest effect was observed for Bacillus subtilis AdHC1,that showed a
zthymol value of 3.14.
7. The combination of thymol in the heating and recovery media does not have
a significant effect in the heat resistance of B. licheniformis and B. subtilis CECT
4071.
8. Under non-isothermal heating conditions, survivors of B. subtilis AdHC1
are overestimated when thymol is added to the recovery medium.
141
9. Nisin has a slight effect on the growth in broth of Listeria monocytogenes,
Salmonella Enteritidis and Salmonella Senftenberg. Lag phase was increased from
13.84 to 17.03 hours for L. monocytogenes when 0.13 M nisin was added. For both
strains of Salmonella, even the highest concentration tested (1.2 M) had no effect on
the lag phase. The growth rate was slightly reduced for all three microorganisms tested.
10. Carvacrol had a significant effect on the growth in broth of Salmonella
Enteritidis and Salmonella Senftenberg. The time to reach stationary phase was
almost doubed, from 7 to 15 h, in the case of S. Enteritidis when 0.77 mM carvacrol was
added. Carvacrol showed a dose-dependent effect on the growth of L.
monocytogenes in broth. This effect could be predicted by simple secondary models.
11. The combination of nisin, carvacrol and a previous heat treatment shows a
sinerystic effect on the growth of L. monocytogenes in broth and in carrot juice and
an additive effect on the growth in broth of S. Enteritidis and S. Senftenberg. A
combination of 0.13 M nisina and 0.11 mM carvacrol was enough to inhibit the
growth in broth of L. monocytogenes, previously exposed to a heat treatment of 15
minutes to 55ºC, at least for 15 days.
12. 12. Flow cytometry is a rapid technique which enables not only cuantify
poblations according to their physiological state, but also detect in what level,
structural or functional, cells are damaged.
13.
The treatments and models used in this Thesis show the possibility to develope
and optimize heat treatments in combination with natural antimicrobials, which
would allow the food industry to get safer and better quality products.
142
8. REFERENCIAS
A
Abee, T., Rombouts, F.M., Hungenholtz, J., Guihard, G., y Letellier, L. (1994).
Mode of action of nisin Z against Listeria monocytogenes Scott A grown at highylow
temperatures. AppliedyEnvironmental Microbiology, 60, 1962–1968.
Abee, T., Klaenhammer, T.R., y Letelier, L. (1994). Kinetic studies of the action of
lactacin F, a bacteriocin produced by Lactococcus johnsonii that forms poration
complexes in the cytoplasmic membrane. Applied and Environmental Microbiology, 60,
1006-1013.
Abbe, T. (1995). Pore-forming bacteriocins of Gram-positive bacteriayself-
protection mechanism of producer organisms. FEMS Microbiology Letters, 129, 1-10.
Abee, T., y Wonters, J.A. (1999). Microbial stress response in minimal processing.
Internaional Journal of Food Microbiology, 50, 65-91.
Alderton, G., Thompson, P.A., y Snell, N. (1964). Heat adaptationyion exchange in
Bacillus megaterium spores. Science. 143,141-143.
Álvarez I., Mañas P., Condón S., y Raso J. (2003). Resistance variation of
Salmonella enterica Serovars to pulsed electric fields treatments. Journal of Food
Science, 68, 2316-2320.
Álvarez I., Niemira B.A., Fan X., y Sommers C.H. (2007). Inactivation of
Salmonella EnteritidisySalmonella Senftenberg in liquid whole egg using generally
recognize as safe aditives, ionizing radiation,yheat. Journal of Food Protection, 70,
1402-1409.
André, S., Zuber, F., y Remize, F. (2013). Thermophilic spore-forming bacteria
isolated from spoiled canned foodytheir heat resistance. Results of a French ten-year
survey. International Journal of Food Microbiology, 165, 134-143.
Ananta, E. y Knorr, D. (2009). Comparison of inactivation pathways of thermal and
high pressure inactivated Lactobacillus rhamnosus ATCC 53103 by flow cytometry
analysis. Food microbiology, 26, 542-546.
Arroyo C., Cebrián G., Condón S., y Pagán R. (2011). Developmento of resistance in
Cronobacter sakazakii ATCC 29544 to thermalynonthermal processes after exposure to
stressing environmental conditions. Journal of Applied Microbiology, 112, 561-570.
146
Arroyo C., Condón S., y Pagán R. (2009). Thermobacteriological characterization of
Enterobacter sakazakii. International Journal of Food Microbiology, 136, 110-118.
Ávila-Sosa, R., Gastélum-Franco, M. G., Camacho-Dávila, A., Torres-Muñoz, J. V.,
Nevárez-Moorillón, G. V. (2008). Extracts of mexican oregano (Lippia berlandieri
Schauer) with antioxidantyantimicrobial activity. Food Bioprocess Technology, 3, 434-
440.
B
Baranyi, J., Roberts, T.A., y McClure, P. (1993). A non-autonomous differential
equation to model bacterial growth. Food Microbiology, 10, 43–59.
Barbosa-Cánovas, G.V., Pothakamury, U.R., Palou, E. y Swanson, B.G. (ed.). 1998.
Nonthermal preservation of foods. Marcel Dekker, Nueva York, Estados Unidos.
Bean, P.G., Dallyn, H., Ranjith, H.M.P. (1979a). Food MicrobiologyyTechnology.
Reviews of the International Meeting on Food MicrobiologyyTechnology. Parma, Italia.
Edit.: Jarvis, Christian, Michener.
Berney, M., Weilenmann, H.U., Ihssen, J., Bassin, C., y Egli, T. (2006a). Specific
growth rate determines the sensitivity of Escherichia coli to termal, UVA, and solar
disinfection. Applied and Environmental Microbiology, 72, 2586-2593.
Berney, M., Weilenmann, H.U., Simonetti y Egli, T. (2006b). Efficacy of solar
disinfection of Escherichia coli, Shigella flexneri, Salmonella typhimurium and Vibrio
cholerae. Journal of Applied Microbiology, 101, 828-836.
Beuchat: L.R. (1994). Antimicrobial properties of spicesytheir essential oils. In:
Natural Antimicrobial SystemsyFood Preservation. Eds. Dillon Y. M. y Board, R. G.
CAB International, Oxon, pp. 167–179.
Berg, R.W. y Sandine, W.E. (1970). Activation of bacterial spores. A review.
Journal of. MilkyFood Technology, 33,435-441.
Bigelow, W.D. (1921). The logarithmic nature of thermal death time curves. Journal
Infection Disease, 29, 528–536.
Boulos, L., Prevost, M., Barbeau, B., Coallier, J., y Desjardins, R. (1999).
LIVE/DEAD BacLight: application of a new rapid staining method for direct
147
enumeration of viable and total bacteria in drinking water. Journal Microbiology
Methods, 101, 828-836.
Brown, K.L., Ayres, C.A., Gaze, J.E., y Newman, M.E. (1984). Thermal destruction
of bacterial spores immobilized in food/alginate particles. Food Microbiology, 1, 187-
198.
Boziaris, I.S., y Adams M.R. (2001). Temperature shock, injuryytransient sensitivity
to nisin in Gram negatives. Journal of Applied Microbiology, 91, 715-724.
Boziaris I.S., Humpheson L., y Adams M.R. (1998). Effect of nisin on heat
injuryyinactivation of Salmonella enteritidis PT4. International Journal of Food
Microbiology, 43, 7-13.
Bunthof, C.J., van der Braack, S., Breeuwer, O., Rombouts, F.M. y Abee, T. (1999).
Rapid fluorescence assessment of the viability of stressed Lactococcus lactis. Aplied
and Environmental microbiology, 65, 3681-3689.
Burt S.A., Fledderman M.J., Haagsman H.P., van Knapen F., y Veldhuizen E.J.A.
(2007). Inhibition of Salmonella enterica serotype Enteritidis on agaryraw chicken by
carvacrol vapour. International Journal of Food Microbiology, 119, 346-350.
C
Carneiro de Melo A.M.S., Cassar C.A., y Miles R.J. (1998). Trisodium phosphate
increases sensitivity of Gram-negative bacteria to lysozymeynisin. Journal of Food
Protection, 61, 839-844.
Carson, C.F., Mee, B.J., y Riley, T.V.(2002). Mechanism of Action of Melaleuca
alternifolia (Tea Tree) Oil on Staphylococcus aureus Determined by Time-Kill, Lysis,
Leakage, and Salt Tolerance Assays and Electron Microscopy. Antimicrobial agents
and chemotherapy, 46, 1914–1920.
Chaturongakul, S., Raengpradub, S., Wiedmann, M. y Boor, K.J. (2008). Modulation
of stressyvirulence in Listeria monocytogenes. Trends in microbiology, 16, 388-396.
Chawla, C.S., Chen, H., y Donnelly (1996). Mathematecally modeling the repair of
heta-injured Listeria monocytogenes as affected by temperature, pH, and salt
concentration. International Journal of Food Microbiology, 30, 231-242.
148
Chen, G., Campanella, O.H., y Corvalan, C.M. (2007). A numerical algorithm for
calculating microbial survival curves during thermal processing. Food Research
International, 40, 203-208.
Conner D.E. (1993). Naturally occurring compounds. In: Davison, P.M.yBranen,
A.L. (eds), Antimicrobials in foods. New York: Marcel Dekker. pp. 441-468.
Crandall A.D.yMontville T.J. (1998). Nisin resistance of Listeria monocytogenes
ATCC70302 is a complex phenotype. AppliedyEnvironmental Microbiology 64: 231-
237.
Cole, M.B., Davies, K.W., Munro, G., Holyoak, C.D. y Kilsby, D.C. (1993). A
vitalistic model to describe the thermal inactivation of Listeria monocytogenes. Journal
of Applied. Microbiology, 12, 232-239.
Condón, S., Oria, P., y Sala, F.J. (1993). Microbial heat resistance determinations by
the multipoint system with the thermoresistometer TR-SC. Improvement of this
methodology. Journal Microbiology Methods,18, 357-366.
Condón, S., y Sala, F.J. (1992). Heat resistance of Bacillus subtilis in bufferyfoods of
different pH. Journal of Food Protection 55, 605-608.
Conesa, R. Periago, P.M., Esnoz, A., López A. y Palop A. (2003). Prediction of
Bacillus subtilis spore survival after a combined nonisothermal-isothermal heat
treatment. European Food ResearchyTechnology, 217, 319-324.
Conesa, R., Andreu, S., Fernández, P.S., Esnoz, A. y Palop, A. (2009).
Nonisothermal heat resistance determinations with the thermoresistometer Mastia.
Journal of Applied Microbiology, 107, 506–513.
Conner: D.E. (1993) Naturally Occurring Compounds. In: Antimicrobials in Foods.
Davidson, P.M., y Branen. A.L. (Eds.). Marcel Dekker, New York, NY, USA, pp. 441–
468.
Coroller, L., Leguerinel, I., y Mafart, P. (2001). Effect of water activities of
heatingyrecovery media on apparent heat resistance of Bacillus cereus spores.
AppliedyEnvironmental Microbiology, 31, 341-347.
Coroller, L., Leguerinel, I., Mettler, E., Savy, N., y Mafart, P. (2006). General model,
based on two Weibull distributions of bacterial resistance, for describing various shapes
of inactivation curves. AppliedyEnvironmental Microbiology, 72, 6493-6502.
149
Corradini, M.G., y Peleg, M. (2009). Dynamic model of heat inactivation kinetics for
bacterial adaptation .AppliedyEnvironmental Microbiology, 75, 2590-2597.
Couvert, O., Gaillard, S., Savy, N., y Mafart P. (2005). Survival curves of heated
bacterial spores: effect of environmental factors on Weibull parameters. International
Journal of Food Microbiology, 101, 73-81.
Couvert, O., Gaillarda, S., Savyb, N., Mafart, P., y Leguerinel, I.(2005). Survival
curves of heated bacterial spores: effect of environmental factors on Weibull
parameters. International Journal of Food Microbiology. 101, 73-81.
Crandall, A.D., y Montville, T.J. (1998). Nisin resistance of Listeria monocytogenes
ATCC700302 is a complex phenotype. AppliedyEnvironmental Microbiology, 64, 231–
237.
Cunha, L.M., Oliveira, F.A.R., Oliveira, J.C. (1988). Optimal experimental design
for estimating the kinetic parameters of processes described by the Weibull probability
distribution function. Journal of Food Engineering, 37,175-191.
D
Davidson, P.M., y Parish, M.E. (1989). Methods for testing the efficacy of food
antimicrobials. Food Technology, 43, 148–155.
Davidson, P.M. 2000. Conservantes químicos y compuestos antimicrobianos
naturales. En Microbiología de los Alimentos: Fundamentos y fronteras. M.P. Doyle,
L.R. Beuchat y T.J. Montville (ed.). Editorial Acribia, Zaragoza, España. pp. 543-581.
Davidson, P.M.(2001). Chemical preservativesynaturally antimicrobial compounds,
In Doyle, M.P. Bechuat, L.R.,y Montville, T.J., Eds., Food Microbiology.
FundamentalsyFrontiers.2nd ed. ASM Press, Washington, DC, pp. 593-628.
Davis, B.D., Dulbecco, R., Eisen, H.N. y Ginseberg, H.S. (1996). Tratado de
microbiología, 4ª edición. Editorial Masson S.A., Barcelona.
De Cordt, S., Vanhoof, K., Hu, J., Maesmans, G., Hendrickx, M. y Tobback, P.
(1992), Thermostability of solubleyimmobilized α-amylase from Bacillus licheniformis.
BiotechnologyyBioengineering, 40, 396–402.
150
Delgado, B., Palop, A., Fernández, P.S., y Periago, P.M.(2004). Combined effect of
thymolycymene to control the growth of Bacillus cereus vegetative cells. European
Food ResearchyTechnology, 218, 188-193.
Delves-Broughton, J., y Gasson M.J. (1994). Nisin. In: Natural Antimicrobial
SystemsyFood Preservation. Dillon, V.M., y Board, R.G. (Eds.). CAB International,
Wallingford, UK, pp. 99–131.
Delves-Broughton, J., Williams G.C., y Wilkinson, S. (1992). The use of the
bacteriocin, nisin, as a preservative in pasteurized liquid whole egg. Letters in Applied
Microbiology, 15, 133-136.
Dimitrijević, S.I., Mihajlovski, K.R., Antonović, D.G., Milanović-Stevanović, M.R.,
y Mijin, D. Ž. (2007). A study of the synergistic antilisterial effects of a sub-lethal dose
of lactic acidyessential oils from Thymus vulgaris L., Rosmarinus officinalis
L.yOriganum vulgare L..Food Chemistry, 104, 774–782.
Dodd, C.E.R. y Aldsworth, T.G. (2002). The importance of RpoS in the survival of
bacteria through food processing. Internationa Journal of Food Microbiology, 74,
189,194.
Doyle M.E. y Mazzotta. A.S. Review of studies on the thermal resistance of
Salmonellae Journal of Food Protectionk, 63, 779-795.
Driessen, A.J., van den Hooven, H.W., Kuiper, W., van Kamp, M., Sahl, H.G.,
Konings, R.N., y Konings, W.N. (1995). Mechanistic studies of lantibiotic-induced
permeabilization of phospholipid vesicles. Biochemistry, 34, 1606–1614.
Du, W.X., Olsen, C.E., Avena-Bustillos, R.J., McHugh, T.H., Levin, C.E., Friedman,
M. (2008). Storage stabilityyantibacterial activity against Escherichia coli O157:H7 of
carvacrol in edible apple films made by two different casting methods". Journal of
Agricultural and Food Chemistry, 56, 3082–8.
E
Esteban, M.D. y Palop A. (2011). Effect of NisinyCarvacrol on Listeria
monocytogenes. Food TechnologyyBiotechnology, 49, 89–95.
151
Esteban M.D.yPalop A. (2011). Nisin, carvacrolytheir combinations against the
growth of heat-treated Listeria monocytogenes cells. Food Technology and
Biotechnology, 49, 89-95.
Esteban, M.D., Huertas, J.P., Fernández, P., y Palop, A. (2013). Effect of the medium
characteristicsythe heatingycooling rates on the nonisothermal heat resistance of
Bacillus sporothermodurans IC4 spores. Food Microbiology, 34, 158-163.
Errington, J 2003. Regulation of endospore formation in Bacillus subtilis. Nature
Reviews Microbiology 1, 117-126 http://dx.doi.org/10.1038/nrmicro750
Etoa, F.-X. y Michiels, L. (1988), Heat-induced resistance of Bacillus
stearothermophilus spores. Letters in Applied Microbiology, 6, 43–45.
Ettayebi, K., El-Yamani, J., y Rossi-Hassani, B.D. (2000). Synergistic effects of
nisinythymol on antimicrobial activities in Listeria monocytogenesyBacillus subtilis,
FEMS Microbiology Letters, 183, 191–195.
European Food Safety Authority (2012). The European Union summary report on
trendsysources of zoonoses, zoonotic agentsyfood-borne outbreaks in 2010. EFSA
Journal, 10, 2597-3039.
F
Farag, R.S., Daw, Z.Y., Hewedi, F.M. y El-Baroty G.S.A. (1989). Antimicrobial
activity of some Egyptian spice essential oils. Journal of Food Protection, 52, 665-667.
Farber, J.M. y Peterquin, P.I. (2000). “Listeria monocytogenes” enThe
microbiologiacal safet and quality of food.B.M. Lund, T.C. Baird-Parker y G.W. Gould
(ed.). Aspen Publishers, Inc, Gaithersburg, Maryland, Estados Unidos, Vol II. Pp.1178-
1233.
Fellows, P. (1994). Tecnología del procesado de los alimentos: Principios y
prácticas. Editorial Acribia S.A., Zaragoza.
Fernández, A., Ocio, M.J., Fernández, P.S., Rodrigo, M., y Martínez, A. (1999).
Application of nonlinear regression analysis to the estimation of kinetic parameters for
two enterotoxigenic strains of Bacillus cereus spores. Food Microbiology, 16, 607-613.
152
Foster, S. J. y Johnstone, K. (1989). The trigger mechanism of bacterial spore
germination. En: Regulation of prokaryotic development (I. Smith, R. A. Slepecky y P.
Setlow, eds) Am. Soc. Microbiol., Washington D. C, pp: 89-108.
G
Gao, F.H., Abee, T., y Konings, W.N. (1991). Mechanism of action of the peptide
antibiotic nisin in liposomesycytochrome c oxidase-containing proteoliposomes.
AppliedyEnvironmental Microbiology, 57, 2164–2170.
Garriga, M., Aymerich, M.T., Costa, S., Monfort, J.M. y Hugas, M. (2002).
Bactericidal synergism through bacteriocins and high pressure in a meat model system
during storage. Food microbiology, 19, 509-518.
Geeraerd, A.H., Herremans, C.H., y Van Impe, J.F. (2000). Structural model
requirements to describe microbial inactivation during a mild heat treatment.
International Journal of Food Microbiology, 59, 185–209.
Geeraerd, A.H., Valdramidis, V.P., y Van Impe, J.F. (2005). GInaFIT, a freeware
tool to assess non-long-linear microbial survivor curves. International Journal of Food
Microbiology, 102, 95-105.
H
Han, Y.W. (1975). Death rates of bacterial spores: nonlineal survivor curve.
Canadian Journal of Microbiology, 21, 1464-1467.
Han, Y.W., Schuyten, H.A., Callihan, C.D. (1971). Combined effect on heatyalkali
in sterilizing sugarcane bagasse. Journal of Food Science, 36, 335-338.
Han, Y.W., Zhang, H.I., Krochta, J.M. (1976). Death rates of bacterial spores:
mathematical models. Canadian Journal of Microbiology, 22, 295-300.
Hansen, T.B., y Knøchel, S. (2001). Factors influencing resuscitationygrowth of heat
injured Listeria monocytogenes 13–249 in sous vide cooked beef. International Journal
of Food Microbiology, 63, 135– 147.
Harris, L.J., Fleming H.P., y Klaenhammer T.R. (1992). Developments in nisin
research. Food Research International, 25, 57-66.
153
Hassani, M., Condón, S., y Pagán, R. (2007). Predicting microbial heat inactivation
under nonisothermal treatments. Journal of Food Protection, 70, 1457-1467.
Hauben, K. J. A., Wuytack, E. C., Soontjens, G. C. F., y Michiels, C. W. (1996).
High pressure transient sensitization of Escherichia coli to lysomzymeynisin by
disruption of outer membrane permeability. Journal of. Food Protection, 59, 350–355.
Hayakawa, K., Matsuda, N., Komaki, K., Matsunawa, K., (1981). Computerized
estimation of reaction kinetic parameters for thermal inactivation of microorganism.
Food ScienceyTechnology, 14, 70-78.
Helander I.M., y Mattila-Sandholm T.M. (2000). Permeability barrier of the Gram
negative bacterial outer membrane with special reference to nisin. International Journal
of Food Microbiology, 60, 153-161.
Helander I.M., Alakomi H.L., Kyösti L.K., Mattila-Sandholm T., Pol I.E., Smid E.J.,
Gorris L.G.M.yvon Wright A. (1998). Characterisation of the action of selected
essential oil components on Gram-negative bacteria. Journal of AgricultureyFood
Chemistry 46: 3590-3595.
Helander, I.M., Alakomi, H.L., Latva-Kala, K., Mattila- -Sandholm, T., Pol, I., Smid,
E.J., Gorris, L.G.M., y von Wright, A. (1998). Characterization of the action of selected
essential oil components on Gram-negative bacteria. Journal of AgriculturalyFood
Chemistry, 46, 3590–3595.
Heredia, N.L., García, G.A, Luévanos, R, Labbé, R.G. y García-Alvarado, J.S.
(1997). Elevation of the heat resistance of vegetative cellsyspores of Clostridium
perfringes Type A by sublethal heat shock. Journal of Food Protection, 60 998-1000.
Hernlem, B. y Hua, S-S. (2010). Dual fluorochrome flow cytometric assessment of
yeast viability. Current Microbiology, 61, 57-63.
Hersom, A.C. y Hutland, E.D. (1985). Conservas alimenticias. Ed. Acribia,
Zaragoza.
Hill, C., Cotter, P.D., Sleator, R.D. y Gahan, C.G.M. (2002). Bacterial stress
response in Listeria monocytogenes: jumping the hurdless imposed by minimal
processing. International Dairy Journal, 12, 273-283.
Hills, BP., y Mackey, B.M. (1995). Multi-compartment kinetic models for injury,
resuscitation induced logygrowth in bacterial cell populations. Food Microbiology, 12,
333-346.
154
Hill, C., Deegan, L. H., Paul, D. Cotter, P. D. Ross, P. (2006). Bacteriocins:
Biological tools for bio-preservationyshelf-life extension. International Dairy Journal,
16, 1058–1071.
Holdsworth, S.D. (1997). Thermal Processing of Packaged Foods. XIVy283 pages,
numerous figuresytables. Blackie Academic y Professional, an imprint of Chapman y
Hall, London.
Holey R.A.yPatel D. (2005). Improvement in shelf-lifeysafety of perishable foods by
plant essential oilsysmoke antimicrobials. Food Microbiology 22: 273-292.
Huemer, I.A., Klijn, N., Vogelsang, H.W.J. y Langeveld, L.P.M. (1998). Thermal
death kinetics of spores of Bacillus sporothermodurans isolated from UHT milk.
International Dairy Journal, 8, 851–855.
Huertas, J.P., Esteban, M.D., Antolinos, V., y Palop, A. (2014). Combined effect of
natural antimicrobialsythermal treatments on Alicyclobacillus acidoterrestris spores.
Food Control, 35, 73-78.
Huisman, G.W., Siegele. D.A., Zambrano, M.M. y Kolter, R. (1996).
Morfologicalyphysiological changes during stationary phase. In: Escherichia
coliySalmonella. CellularyMolecular Biology ed.Neidhardt, F.C.pp.1672-1688.
Washington: ASM Press.
Humphrey T.J., Slater E., McAlpine K., Rowbury, R.J.yGilbert R.J. (1995).
Salmonella enteritidis phage type 4 isolates more tolerant to heat, acid, or hydrogen
peroxide also survive longer on surfaces. AppliedyEnvironmental Microbiology 61:
3161-3164.
I
Invitrogen. 2012. The molecular probes handbook. En:
www.invitrogen.com/handbook
J
Jack, R.W., Tagg, J.R., y Ray, B. (1995). Bacteriocins of Gram-positive bacteria.
Microbiological Reviews, 59, 171–200.
155
8. Referencias
Jagannath, A., Tsuchido, T., y Membré J.M. (2005). Comparison of the thermal
inactivation of Bacillus subtilis spores in foods using the modified WeibullyBigelow.
Food microbiology, 22, 233-239.
Jay, J.M. (1996). Modern Food Microbiology. 5th Edition. Chapman y Hall. New
York, NY.
Johnstone, K (1994).The trigger mechsnism of spore gemination: current concepts
Journal of. Applied Bacteriology, Symposium supplement, 76, 17-24.
Juven, B.J., Kanner, J., Schved, F., y Weisslowicz, H. (1994). Factors that interact
with the antibacterial action of thyme essential oilyits active constituents. Journal of
Applied Bacteriology, 76, 626–631.
K
Katzin, L.I., Sandholzer, L.A., Strong, M.E. (1943). Application of the decimal
reduction time principle to a study of the resistance of coliform bacteria to
pasteurization. Journal of Bacteriology, 45, 256-272.
Kalchayanand, N., Hanlin, M. B., y Ray, B. (1992). Sublethal injury makes Gram-
negativeyGram-positive bacteria sensitive to the bacteriocins, pediocin AcH,ynisin.
Letters.in Applied. Microbiology, 15, 239–243.
Keynan, A. (1978). Spore structureyits relation to resistance, dormancyygermination.
En: Spores VII (G. Chambliss y J.C. Vary, eds) Am. Soc. Microbiol., Washington D. C.
pp: 43-53.
King, A.D., Bayne, H.G. y Alderton, G. (1979). Non logaritmic death rate
calculation for Bysoclamys fulvayother microorganism. AppliedyEnvironmental
Microbiology, 37, 596-600.
Komemushi, S. (1983). On the changes on death rates constant of bacterial spores in
the course of heat steriliation. En Heat steriliation of food. Edit.: Motohiro, T.;
Hayakawa, K.I.K. Publishers Tokio. Japón.
Komitopoulou, E., Boziaris, I., Davies, E., Delves-Broughton, J., y Adams, M.
(1999).
Alicyclobacillus acidoterrestris in fruit juicesyits control by nisin. International Journal
of Food ScienceyTechnology, 34, 81-85.
143
8. Referencias
Kuipers, O.P., Rollema, H.S., Yap, W.M., Boot, H.J. Siezen, R.J. y de Vos, W.M.
(1992). Engineering dehydrated amino acid residues in the antimicrobial peptide nisin,
Journal of Biological Chemistry, 267, 24340–24346.
L
Lagouri, V., Blekas, G., Tsimidou, M., Kokkini, S., y Boskou, D. (1993).
Compositionyantioxidant activity of essential oils from oregano plants grown wild in
Greece. Z Lebensm Unters Forsch, 197, 20–23.
Lambert, R.J.W., Skandamis, P.N., Coote, P.J., y Nychas, G.J.E. (2001). A study of
the minimum inhibitory concentrationymode of action of oregano essential oil,
thymolycarvacrol. Journal of Applied Microbiology, 91, 453-462.
Le Jean, G., Abraham, G., Debray, E., Candau, Y., y Piar G. (1994). Kinetics of
thermal destruction of Bacillus stearothermophilus spores using a two reaction model.
Food Microbiology, 11, 229-241.
L'Ecuyer, P.B., Diego, J., Murphy, D., Trovillion, E., Jones, M., Sham, D.F., y
Fraser, V.J. (1996). Nosocomial outbreak of gastroenteritis due to Salmonella
Senftenberg. Clinical Infectious Diseases, 23, 734-742.
Lee J.I., Lee H.J., y Lee M.H. (2002). Synergistic effect of nisinyheat treatment on
the growth of Escherichia coli 0157:H7. Journal of Food Protection, 65, 408-410.
Leguerinel, I., y Mafart., P. (2001). Modelling the influence of pHyorganic acid
types on thermal inactivation of Bacillus cereus spores. International Journal of Food
Microbiology, 63, 29-34.
Lehtinen, J., Nuutila, J., y Lilius, E-M. (2004). Green fluorescence protein-propidium
iodide (GFP-PI) based assay for flow cytometric measurement of bacterial viability,
Cytometry, 60, 165-172.
Leistner, L. (2000). Use of combined preservative factors in food of developing
countries. En The Microbiological safety and quality of food. B.M. Lund, T.C. Baird-
Parker y G.W. Gould (ed.). Aspen publishers, Inc., Gaithersburg, Maryland, Estados
Unidos. Vol I. pp. 294-314.
Lekogo, B.M., Coroller, L., Mathot, A.G., Mafart, P., y Leguerinel, I. (2010).
Modelling the influence of palmitic, palmitoleic, stearicyoleic acids on apparent heat
144
8. Referencias
resistance of spores of Bacillus cereus NTCC 11145yClostridium sporogenes Pasteur
79.3. International Journal of Food Microbiology, 141, 242-247.
Licciardello, J. J. y Nickerson, J. T. R. (1963) Effect of radiation environment on the
thermal resistance of irradiated spores of Bacillus subtilis. AppliedyEnvironmental
Microbiology, 11, 216-219.
Linton, R.H., Carter, W.H., Pierson, M.D., y Hackney, C.R. (1995). Use of a
modified Gompertz equation to model nonlinear survival curves for L. monocytogenes
Scott A. Journal of Food Protection, 58, 946-951.
López, M., González, I., Condón, S., y Bernardo, A. (1996). Effect of pH heating
medium on the thermal resistance of Bacillus stearothermophilus spores. International
Journal of Food Microbiology, 28, 405–410.
González, I., López, M., Mazas, M., Bernardo, A., y Martín R. (1996), Effect of pH
of the recovery medium on the apparent heat resistance of three strains of Bacillus
cereus. International Journal of Food Microbiology, 31, 341-347.
López-Malo, A., Alzamora, S. M.,yGuerrero, S. 2000.Natural antimicrobialfrom
plants, In Alzamora, S. M. Tapia, M. S.,yLópez-Malo, A., Eds., Minimally
processedFruitsyvegetables. Fundamentals AspectsyApplications. Aspen Publishers,
Gaithersburg, MD, pp. 237-264
Lück, E. y Jager, M. (ed.) (1995). Antimicrobial food additives. Characteristics, uses,
effects. Springer, Berlín, Alemania.
M
Mackey, B.M. (2000).Injured bacteria. In The Microbiological SafetyyQuality of
Foods, Vol.I, ed.Lund, B.M., Baird-Parker,T.C. y Gould G.W. pp.315-341. Aspen
Publishers, Inc, Gaithersburg.
Mafart, P., Couvert, O., Gaillard, S., y Leguerinel, I. (2002). On calculating sterility
in thermal preservation methods: application of the Weibull frequency distribution
model. International Journal of Food Microbiology, 72, 107-113.
Mafart, P. y Leguerinel, I. (1998). Modeling Combined Effects of TemperatureypH
on Heat Resistance of Spores by a Linear-Bigelow Equation. Journal of Food Science,
63, 6-8.
145
8. Referencias
Mansour, M. y Millière, J. B. 2001. An inhibitory synergistic effect of nisin-
monolaurin combination on Bacillus sp, vegetativecell in milk. Food Microbiology, 18,
87-94.
Mañas, P., y Mackey B.M. (2004). Morphological and physiological changes
induced by high hydrostatic pressure in exponential- and stationary-phase cells of
Escherichia coli: Relationship with Cell Death. Applied and Environmental
Microbiology, 70, 1545-1554
Mañas P., Pagán R. (2005). A review: Microbial Inactivation by New Technologies
of Food Preservation. Journal of Applied microbiology, 98, 1387-1399.
Mahadeo, M.; Tatini, S. R. (1994). The potential use of nisin to control L.
monocytogenes in poultry. Letters in Applied Microbiology, 18, 323–326.
Mañas P., Pagán R., Álvarez I. y Condón, S. (2003). Survival of Salmonella
senftemberg 775 W to current liquid whole egg pasteurization treatments. Food
microbiology, 20, 593-600.
Marquis, R.E. y Shin, S.Y. (1994). Mineralizationyresponses of bacterial spores to
heatyoxidative agents. FEMS Microbiological Reviews, 14, 375-9.
Masschalk, M., García-Graells, C., van Haver, E., y Michiels C.W. (2000).
Inactivation of high pressure resistant Escherichia coli by lysozyme and nisin under
high pressure. Innovative Food Science and Emerging Technologies, 1, 39-47.
Mead, P.S., Slutsker, L., Dietz, V., McCaig, L.F., Bresee, J.S., Shapiro, C., Griffin,
P.M., y Tauxe, R.V. (1999). Food-related illnessydeath in the United States. Emerging
Infectious Disease, 5, 607– 625.
Meghrous, J., Lacroix, C., y Simard, R. E. (1999). The effects on vegetative cells and
spores of three bacteriocins from lactic acid bacteria. Food Microbiology, 16, 105-114.
Mendoza-Yepes, M.J., Sanchez-Hidalgo, L.E., Maertens, G., y Marin-Iniesta, F.
(1997). Inhibition of Listeria monocytogenesyother bacteria by a plant essential oil
(DMC) in Spanish soft cheese. Journal of Food Safety, 17, 47–55.
Metrick C., Hoover D.G. y Farkas D.F. (1989). Effects of high hydrostatic pressure
on heat-resistantyheat-sensitive strains of Salmonella. Journal of Food Science, 54,
1547-1549.
Moats, W.A. (1971). Kinetics of thermal death of bacteria. Journal of Bacteriology,
105,165-171.
146
8. Referencias
Muñoz-Cuevas, M., Metris, A. y Baranyi, J. (2011). Predictive modelling of
Salmonella: from cell-cycle measurements to e-models. Food Research International
doi:10.1016/j.foodres.2011.04.033.
N
Nassar, A., Farrag, S. A. (1995). Nisin as inactivator to L. monocytogenes in brothyin
ground beef. Assiut Veterinary Medical Journal, 32, 198–206.
Novo, D., Perlmutter, N.G., Hunt, R.H., y Shapiro, H.M. (1999). Accurate flow
cytometric membrane potential measurement in bacteria using diethyloxacarbocyanine
and a ratiometric technique. Cytometry, 35, 55-63.
Nychas G.J.E. (1995). Natural Antimicrobials from Plants. In: New Methods of Food
Preservation. Gould, G.W. (Ed.). Blackie AcademicyProfessional, Glasgow, UK, pp.
58–89.
Núñez, R. (2001). Flow cytometry for research scientists principles and applications.
Horizon Scientific Press, Norwich.
O
Oomes, S., van Zuijlen, A., Hehenkamp, J., y Brul, S. (2007). The caracterization of
Bacillus spores occurring in the manufacturing of (low acid) canned products.
International Journal of Food Microbiology, 120, 85-94.
P
Pagán, R., Condón, S. y Raso, J. (2005). Microbial inactivation by pulsed electric
fields. En Novel Foods Processing Technologies. G.V. Barbosa-Cánovas, M.S. Tapia y
P. Cano (ed.). Marcel dekker/CRC press, Nueve York, Estados Unidos. Pp. 45-68.
Palop, A., Mañas, P., y Condón, S. (1999). Sporulation temperatureyheat resistance
of Bacillus spores: a review. Journal of Food Safety, 19, 57-72.
147
8. Referencias
Palop, A., Raso, J., Pagán, R., Condón, S., y Sala, F.J. (1996). Influence of pH on
heat resistance of Bacillus licheniformis in bufferyhomogenised foods. International
Journal of Food Microbiology, 29, 1-10.
Palop, A., Rutherford, G.C. y Marquis, R.E., (1998). Inactivation of enzymes within
spores of Bacillus megaterium ATCC 19213 by hidroperoxides. Canadian Journa lof
Microbiology, 44,465-470.
Paparella, A., Taccogna, L., Aguzzi, I., Chaves-López, C., Serio, A., Marsilio, F.,
Suzzi, G. (2008). Flow cytometric assessment of the antimicrobial activity of essential
oils against Listeria monocytogenes. Food Control, 19, 1174-1182.
Peleg, M. y Cole, M.B. (1998). Reinterpretation of microbial survival curves.
Critical Reviews in Food ScienceyNutrition, 38, 353-380.
Peleg, M., y Normand, M.D. (2004). Calculating microbial survival
parametersypredicting survival curves from non-isothermal inactivation data. Critical
Reviews in Food ScienceyNutrition, 44, 409-418.
Periago P.M. y Moezelaar R. (2001). Combined effect of nisinycarvacrol at different
pHytemperature levels on the viability of different strains of Bacillus cereus.
International Journal of Food Microbiology, 68, 141-148.
Periago P.M., Delgado B., Fernández P.S. y Palop A. (2004). Use of
carvacrolycymene to control growthyviability of Listeria monocytogenes
cellsypredictions of survivors using frequency distribution functions. Journal of Food
Protection, 67, 1408-1416.
Periago P.M., Palop A. y Fernández P.S. (2001). Combined effect of nisin,
carvacrolythymol on the viability of Bacillus cereus heat-treated vegetative cells. Food
ScienceyTechnology International, 7, 487-492.
Periago P.M., van Schaik W., Abee T. y Wouters J.A. (2002). Identification of
proteins involved in the heat stress response of Bacillus cereus ATCC 14579.
AppliedyEnvironmental Microbiology, 68, 3486-3495.
Periago, P.M., Delgado, B., Fernández, P.S., Palop, A. (2004) Use of
carvacrolycymene to control growthyviability of Listeria monocytogenes
cellsypredictions of survivors using frequency distribution functions. Journal of. Food
Protection, 67, 1408–1416.
148
8. Referencias
Periago, P.M., Leontidis, S., Fernández, P.S., Rodrigo, C., y Martínez, A. (1998).
Kinetic parameters of Bacillus stearothermophilus spores under
isothermalynonisothermal heating condition. Food ScienceyTechnology International,
4, 443-447.
Periago, P.M., Palop, A., Martínez, A., y Fernández, P.S. (2002) Exploring new
mathematical approaches to microbiological food safety evaluation: An approach to
more efficient risk assessment implementation. Dairy FoodyEnvironment Sanitation,
22, 18–23.
Perkin, A.G., Burton, H., Underwood, H.M., y Davis, F.L. (1977). Thermal death
kinetics of Bacillus stearothermophilus spores at ultra high temperatures II. Effect of
heating period on experimental results. International Journal of Food
ScienceyTechnology, 12, 131-148.
Pflug, I.J. y Smith, G.M. (1977). En Spore research. Vol II. Edit: Barker, A.N., Wolf,
J., Ellar, D.J., Dring, G.D, Gould, G.W. Academic Press, Londres.
Philips, C.A. (1999). The effect of citric acid, lactic acid, sodium citrateysodium
lactate aloneyin combination with nisin, on the growth of Arcobacter butzleri. Letters in
Applied Microbiology, 29, 424-428.
Pol, I.E. y Smid, E.J. (1999). Combined action of nisin and carvacrol on Bacillus
cereus and Listeria monocytogenes. Letters in Applied Microbiology, 29, 166–170.
Pol, I.E., (2001). Inproved availability of nisin in novel convinations with other food
preservations factor. Ph.D thesis. Wageningen University, The Netherlands.
Pol, I.E., Willy, G.C. van Arendonk, Mastwijk, H.C., Krommer, J., Smid, E.J., y
Moezelaar, R. (2001) Sensitivities of germinating sporesycarvacrol-adapted vegetative
cellsyspores of Bacillus cereus to nisinypulsed-electric-field treatment.
AppliedyEnvironmental Microbiology, 67, 1693–1699.
Pol, I.E., y Smid, E.J. (1999). Combined action of nisinycarvacrol on Bacillus
cereusyListeria monocytogenes, Letters in Applied Microbiology, 29, 166–170.
Prittjarvi, T. S. M.,Wahlstrom, G., Rainey, F. A., Saris, P. E. J., y Salinoja-Salonen,
M. S. (2001). Inhibition of bacilli in industrial starches by nisin. Journal of Industrial
MicrobiologyyBiotechnology, 26, 107-114.
149
8. Referencias
R
Rahn, O. (1929). The sice of bacteria as a cause of a logaritmic order of death.
Journal of Genetic and Phisiology., 13,179-182.
Rahn, O. (1945a). Injuryydeath of bacteria by chemical agents. Biodynamic.
Monograph. nº3, Edit: Cuyet, B.J., Normandy, Misoury, Usa.
Rahn, O. (1945b). Physical methods of sterilization of microorganisms.
Bacteriological Review, 9, 1-50.
Raso, J. y Barbosa-Cánovas, G.V. (2003). Nonthermal preservation of foos using
combined processing techniques. Critical Reviews in Food Science, 43, 265-285.
Rattanachaikunsopon, P. y Phumkhachorn, P. (2010). Synergistic antimicrobial
effect of nisiny-cymene on Salmonella enterica serovar Thiphy in vitroyready-to-eat
food. Bioscience, BiotechnologyyBiochemistry, 74, 520-524.
Ray, B. (1992). Nisin of Lactococcus lactis ssp. lactis as Food Biopreservative. In:
Food Biopreservatives of Microbial Orgins. Ray, B., Daeschel, M.A. (Eds.). CRC Press,
Boca Raton, FL, USA pp. 207–264.
Rigsbee, W., Simpson, L.M. y Oliver, J.D. (1997). Detection of the viable but non-
culturable state in Escherichia coli O157:H7. Journal of Food Safety, 16, 255-262.
Rocourt, J. y Cossart, P. (2000)”Listeria monocytogenes”. En Microbiología de los
Alimentos: Fundamentos y fronteras.M.P. Doyle, L.R. Beuchart y T.J. Montville (ed.).
Editorial Acribia, Zaragoza, España. Pp. 355-371.
Rodriguez, A.C., Smerage, G. H., Teixeira, A.A. y Busta, F.F. (1988). Kinetic effect
of lethal temperature on populations dynamics of bacterial spores. Translation of the
American Society of Agricultural Engineers, 31, 1594-1601, 1606.
Rodriguez, A. C., Smerage, G. H., Teixeira, A. A., Lindsay, J. A., y Busta, F. F.
(1992). Population model of bacterial spores for validation of dynamic thermal
processes. Journal of Food Process Engineering, 15, 1-30.
Rushdy A.A., Stuart J.M., Ward L.R., Bruce J., Threlfall E.J., Punia P.y Bailey J.R.
(1998) National outbreak of Salmonella Senftenberg associated with infant food.
EpidemiologyyInfection, 120, 125-128.
150
8. Referencias
Ryser, E.T., y Marth, E.H. (2007). Listeria, Listeriosis, y Food Safety. CRC Press,
Boca Raton, FL, USA.
S
Salkinoja-Salonen S., Vuorio R., Andersson M.A., Kämpfer P., Andersson M.C.,
Honkanen-Buzalski T.,yScoging A.C. (1999).Toxigenic strains of Bacillus
licheniformis related to food poisoning. AppliedyEnvironmental Microbiology, 65,
4637–4645.
Schillinger, U., Geisen, R., y Holzapfel, W.H. (1996). Potential of antagonistic
microorganismsybacteriocins for the biological preservation of foods. Trends in Food
ScienceyTechnology 7, 158– 164.
Sedlák, M., Vinter, V., Adamec, J., Vohradský, J., Voburka, Z., y Chaloupka. J.
(1993). Heat shock applied early in sporulation affects heat resistance of Bacillus
megaterium spores. Journal of Bacteriology, 175, 8049-8052.
Shapiro, H.M. (2000). Membrane potential estimation by flow cytometry. Methods,
21, 271-279.
Skandamis, P., Koutsoumanis, K., Fasseas, K. y Nychas G-J. E. (2001). Oregano
essential oil with and without the addition of EDTA was tested against Escherichia coli.
Italian Journal of Food Science, 13, 65-75.
Skandamis, P.N. y Nychas G.-J.E. (2001). Effect of oregano essential oil on
microbiological and physico-chemical attributes of minced meat stored in air and
modified atmospheres, Journal of Applied Microbiology, 91, 1011-1022.
Setlow, P., (2000). Resistance of bacterial spores. In: Storz, G., Hengge-Aronis, R.
(Eds.), Bacterial Stress Reponses. American Society of Microbiology, Washington
D.C., pp. 217-230.
Setlow, P. (2006). Spores of Bacillus subtilis: their resistance toykilling by radiation,
heatychemicals. Journal of Applied Microbiology, 101, 514-525.
Shull, J. J., Cargo, G. T. y Ernst R.R. (1963). Cinetics of heat activationythermal
death of bacterial spores. Applied Microbiology, 11, 485-487.
Sikkema, J., de Bont, J.A. y Poolman, B. (1994). Interactions of cyclic hydrocarbons
with biological membranes. Journal of Biological Chemistry, 269, 8022–8028.
151
8. Referencias
Sing B., Falahee, M. B.y Adams, M. R. 2001. Synergistic inhibition of Listeria
monocytogenes by nisin and garlic extract. Food Microbiology, 18, 133-139
Smelt J.P.P.M., Otten G.D.yBos A.P. (2002). Modelling the effect of sublethal injury
on the distribution of the lag times of individual cells of Lactobacillus plantarum.
International Journal of Food Microbiology 73, 207-212.
Scheldeman, P., Herman, L., Foster, S., y Heyndrickx, M. (2006). Bacillus
sporothermodurans and other highly heat-resistant spore formers in milk. Journal of
Applied Microbiology, 101, 542-555.
Shelef, L. A. 1983. Antimicrobial effects of spices. Journal of Food Safety, 27, 370-
374.
Stasiewicz. M.J., Marks, B.P., Orta-Ramírez, A., y Smith, D.M. (2008). Modelling
the effect of prior sublethal thermal history on the thermal inactivation rate of
Salmonella in ground turkey. Journal of Food Protection, 71, 279-285.
Stevens K.A., Klapes N.A., Sheldom B.W.yKlaenhammer T.R. (1991). Nisin
treatment for the inactivation of Salmonella speciesyother Gram-negative bacteria.
Applied and Environmental Microbiology, 57, 3613-3615.
Stocks. S. M. (2004). Mechanism and use of the commercially aviable viability stain,
Baclight. Cytometry A, 61, 189-195.
Stumbo, C.R. (1973). Thermocacteriology in food processing. (2nd ed.). Academic
Press, London, New York.
T
Tabit F. T., y Buys E.M (2010). The effect of wet heat treatment on the
structuralychemical components of Bacillus spotothermodurans spores. International
Journal of Food Microbiology, 140, 207-213.
Texeira, A. (1992). Thermal procesing calculations. In D.R. Heldman, y L.B. Lund,
Handbook of food engineering. New York: Marcel Dekker.
Tiwari, B.K., Vasilis V.P., O’ donnell, C.P., Muthukumarappan, K., Bourke, P. y
Cullen, P.J. (2009). Aplication of natural antimicrobials for food preservation.
Journal of AgriculturalyFood Chemistry, 57, 5987–6000.
152
8. Referencias
Toledo, R.T. (1999). Fundamental of food process engineering (2nd ed.) Aspen.
Gaithersburg M.D.pp, 315-397.
Thomas, L. V. y Delves-Broughton, J. (2001). New advances in the application of
the food preservative nisin. ResearchyAdvances in Food Science, 2, 11-22.
Thomas, L. V. y Delves-Broughton, J. (2005). Nisin. In P. M. Davidson, J. N. Sofos,
y A. L. Branen (Eds.), Antimicrobials in food (pp. 237e262). Florida: CRC Press.
Tremoulet, F., Rabier, P., y Gas, G. (2002). Inhibition of Bacillus stearothermophilus
spores in liquid medium by free fatty acids withywithout heat: possible mechanism for
the microbiological stability of canned fat-duck liver. Journal of Food Sciences, 67,
1144–1148.
U
Ueckert, J.E., ter Steeg, P.F., y Coote, P.J. (1998). Synergistic antibacterial action of
heat in combination with nisinymagainin II amide, Journal of Applied Microbiology,
85, 487–494.
Ultee A., Slump R.A., Stering G.ySmid E.J. (2000). Antimicrobial activity of
carvacrol towards Bacillus cereus on rice. Journal of Food Protection, 63, 620-624.
Ultee, A., Gorris, L.G., y Smid, E.J. (1998). Bactericidal activity of carvacrol
towards the food-borne pathogen Bacillus cereus. Journal of Applied Microbiology, 85,
211–218.
Ultee, A., Kets, E.P.W., y Smid, E.J. (1999) Mechanism of action of carvacrol on the
food-borne pathogen Bacillus cereus, AppliedyEnvironmental. Microbiology, 65, 4606–
4610.
Ultee, A., Kets, E.P.W., Alberda, M., Hoekstra, F.A., Smid, E.J. (2000) Adaptation
of the food-borne pathogen Bacillus cereus to carvacrol. Archives of Microbiology, 174,
233-238.
Ultee, A., Slump, R.A., Steging, G., y Smid, E.J. (2000). Antimicrobial activity of
carvacrol towards Bacillus cereus on rice. Journal of Food Protection, 63, 620–624.
Ultee, A., Smid, E.J. (2001). Influence of carvacrol on growthytoxin production by
Bacillus cereus. International. Journal of. Food Microbiology, 64, 373–8.
153
8. Referencias
Ungaretti, L., da Silva, C.A., Martins, B.C., y Falcão G.M. (2012). Bacillus
coagulans spore inactivation through the application of oregano essential oilyheat. LWT
- Food ScienceyTechnology, 46, 267-273.
V
Vaara, M. (1992). Agents that increase the permeability of the outer membrane.
Microbiology Reviews, 56, 395.
Valdramidis, V.P., Geeraerd, A.H., Bernaerts, K. y Van Impe, J.F. (2006). Microbial
dynamics versus mathematical model dynamics: The case of microbial heat resistance
induction. Innovative Food Science y Emerging Technologies, 7, 80-87.
Valdramidis, V.P., Geeraerd, A.H., Bernaerts, K. y Van Impe, J.F. (2008).
Identification of non-linear microbial inactivation kinetics under dynamic conditions.
International Journal of Food Microbiology, 128, 146-152.
Valero, M., Leontidis, S., Fernández, P.S., Martínez, A., y Salmerón, M.C. (2000).
Growth of Bacillus cereus in naturalyacidified carrot substrates over the temperature
range 5–30 °C. Food Microbiology 17,605–612.
Van Zuijlen, A., Periago P.M., Amézquita, M., Palop, A., Brul, S., y Fernández, P.S.
(2010). Characterization of Bacillus sporothermodurans IC4 spores; putative indicator
microorganism for optimization of termal processes in food sterilization. Food Res
International,43, 1895-1901.
Vázquez-Boland, J.A., Kuhn, M., Berche, P., Chakraborty, T., Domínguez-Bernal,
G., Goebel, W., González-Zorn, B., Wehland, J. y Kreft, J. (2001).
Listeriapathogenesisymolecular virulence determinants. Clinical microbiology reviews,
14,584-640.
Verheul, A., Russel, N.J., Hoff, R.R., Pombouts, F.M., y Abee, T. (1997).
Modifications of membrane phospholipid composition in nisin-resistant Listeria
monocytogenes Scott A. Applied and Environmental Microbiology, 63, 3451-3457.
Vurma, M., Chung, Y.-K., Shelhammer, T.H., Turek, E.J., y Yousef, A. E. (2006).
Use of phenolic compounds for sensitizing Listeria monocytogenes to high pressure
processing. International Journal of Food Microbiology, 106, 263-269.
154
8. Referencias
W
Warth, A.D., (1980). Heat stability of Bacillus cereus enzymes within sporesyin
extracts, Journal of. Bacteriology, 143, 27-34.
Wiedeman. I., Breukink, E., van Kraaij, C., Kuipers, O.P., Biermaum, G., de Kruijff,
B., y Shal, H.-G. (2001). Specific binding of nisin to the peptidoglycan precursor lipid
II combines pore formationyinhibition of cell wall biosynthesis for potent antibiotic
activity. Journal of Biological Chemistry, 276, 1772-1779.
World Health Organization. Food Safety. An Essential Public Health for the New
Millennium. Issue 1999 [En línea]. http://www.who.org/fsf/brochure/foodsafety
/fsbroe2.polf [consulta: 30 agosto 1999].
Y
Yokoya, F., York, G.K. (1965). Effect of several environmental conditions on the
thermal death rate of endospores of aerobic thermophilic bacteria. Applied
Microbiology, 13, 993-999.
155