Solution sheet: Intesis for Data Center’s

Intesis AC Interfaces for Data Center’sData Center’s are the core of our communications, data storage and Applications Servers. They need to maintain a constant temperature to assure the correct behavior of their electrical components. Even if there’s only one server with a small switch (small office) or a large Data Center, these systems are nowadays critical for our businesses. We need them to perform 24/7 and a system failure can be catastrophic and can lead to a huge loss of money.

That’s why inside Data Center’s we always have HVAC systems installed. Normally the IT maintenance set the temperature in Cool mode and with a setpoint with a low temperature so that the climate is maintained.

Solution:

That provides:

• Intesis AC Interfaces (AC Brand to KNX, BACnet, Modbus, WIFI)

• AC Cloud Control (Intesis Home Cloud APP)

Stable temperature in Data Center’s, rooms or areas

• HVAC Integration into BMS/SCADA systems

• HVAC Cloud remote control and monitoring

• HVAC Load Balancing

“Intesis solutions keep your systems

well”

For sure, by doing this we are doing something good to keep our systems well, but…

Considerations in a normal HVAC installation:

• Is this a secure system?

Surely not. It depends on a remote controller (walled or IR) that someone can change the setpoint, mode or even switch it off by mistake and the room temperature will increase rapidly.

• What about money and energy savings?

Without correct configuration, we can waste both, money and energy. Remote Controlled HVAC installations can save up to the 40% of energy! Check out our Success Stories.

• Do we have feedback from the installation?

Normally HVAC installations are completely isolated from SCADA/BMS, so no one monitors them ...until we have a problem. With the Intesis AC Interfaces or IntesisHome you have real time feedback of the HVAC status and the error codes and descriptions of them. It helps the maintenance team to be more efficient in solving issues.

What else:

• You can increase the HVAC lifetime by setting up a correct behavior of the installation

• Load Balancing with HVAC systems: You can balance between 2 splits or more to work every other day and then you can be certain both devices work properly, or based on HVAC failures

• Possibility to remove Remote commander

• Schedule / Calendar

• Events push/email/BMS notifications

• Number of working hours

• And many other functions

Learn more at www.intesis.comIntesisTM is a trademark of HMS Industrial Networks AB, Sweden, USA, Germany and other countries. Other marks and words belong to their respective companies. All other product or service names mentioned in this document are trademarks of their respective companies.Part No: INSSDACE2020 Version 1.01/2020 - © HMS Industrial Networks - All rights reserved - HMS reserves the right to make modifications without prior notice.

HMS is represented all over the world. Find your nearest contact here:

www.hms-networks.com/contact

HMS Networks - Contact