apex isfc horizontal end-suction pumps to iso 2858 dimensions · apex isfc horizontal end-suction...
TRANSCRIPT
ApplicAtions
For clean and dirty water and other liquids
with similar properties;
- Cooling water circulation
- Water supply and boosting
- Heating and air conditioning
- Oils, solvents and hydrocarbons
- Hot water up to 130 deg C
- Fuel loading, transfer and distribution
- General industrial services
- Seawater service
- Starch and sugar production
WoRKinG pREssURECast iron pumps are capable of a working pressure of 16 bar.
With higher rated flanges, cast steel and stainless steel pumps can be supplied for higher working pressures. All pumps are hydrostatically tested to 1.5 times the rated working pressure.
MEchAnicAl sEAlVirtually any make and type of single, double or cartridge mechanical seal may be fitted.
spARE pARtsAll ISFC pumps are fully supported by a generous inventory of spare parts available from stock. Contact the dedicated spares team [email protected]
APEX ISFC Horizontal end-suction pumps to ISO 2858 dimensions
FEAtUREs Compact design with small footprint
No alignment required
Dimensions to BS EN ISO 2858:2010
Mechanical design to BS EN ISO 5199-2002
Complies to ATEX Directive 2014/34/EU
BEnEFitsHigh energy efficiency
Impellers trimmed to contract duty
IE3 motors for energy saving
opERAtinG RAnGEDischarge flange sizes 32 mm to 200 mmMaximum flowrate 900 m3/hrMaximum generated head 160m
MAtERiAlsCastings in a variety of materials are produced in the company’s own ISO 9001 foundry in Bristol, using the Replicast® method. Castings can meet NORSOK and NACE MR0103 standards where required.
Cast Iron BS-1561:2011Stainless Steel ASTM A351 CF8M, CF3M, CF8, CF3Duplex stainless steel ASTM A890 Grade 1BSuper duplex stainless steel ASTM A890 Grade 5ACast steel ASTM A216 Grade WCBTitanium ASTM B367 Grade 2Hastalloy C ASTM A494 Grade CW-12MWCast bronze BS1400 grade LG2Other grades available on request.
For further information on any APEX product,
please contact the APEX sales office:
tel: 0117 9077555
A P E X F L U I D E N G I N E E R I N G LT D
M O R L E Y R O A D, STAPLE HILL
BRISTOL, BS16 4QT
4 pole 1450 rpm
6
1 1.2
10
12
8
20
15
120
50
30
40
60
70
80
100
25
20
1.5
5 6 87
2 2.5
10
3
12 15
4 5 12
3025
6 7 8 10
40 50 60
15
70
20
80 400200
30
100 120 150
40 50 8060
250
70
300
100 250
600500
120 150 200
800
300
10004
50x32-160
50x32-200
65x50-160
65x40-200
65x40-250
65x40-315
80x65-160
80x50-200
80x50-250
25
80x50-315
100x65-200
100x65-250
100x65-315
125x100-200
125x100-250
125x100-315
125x80-400 125x100-400
150x125-250
150x125-315
150x125-400
200x150-315
200x150-400
250x200-315
250x200-400
125x100-500 150x125-500
200x150-500
15
504
8
1
10
12
15
25
20
30
40
50
60
70
4
15
21.51.2
5 6 7
32.5
108 12
765
20 25
108 12
30 40
80
100
120
200FLOW RATE Litres per second
200100
20 25
7060 80
504030
120 150
1007060 80
250 300
150120
500400 600
300250
1000FLOW RATE m3/Hr
800
150
200
50x32-160
50x32-200
65x50-160
65x40-200
65x40-250
80x65-160
80x50-200
80x50-250
100x65-200
100x65-250
125x100-200
125x100-250
65x40-315 80x50-315 100x65-315 125x100-315
2 pole 2900 rpm
TOTA
L H
EAD
Met
res
100x80-160
100x80-160
TOTA
L H
EAD
Met
res
FLOW RATE m3/Hr
FLOW RATE Litres per second
APEX ISFC Range Charts 50hz
For further information on any APEX product,
please contact the APEX sales office:
tel: 0117 9077555
A P E X F L U I D E N G I N E E R I N G LT D
M O R L E Y R O A D, STAPLE HILL
BRISTOL, BS16 4QT