api 603 stainless steel valves - razvalve...

12
ANSI Class 150 and 300 GATE, GLOBE & CHECK VALVES Y-STRAINERS API 603 STAINLESS STEEL VALVES

Upload: truongdat

Post on 06-Jul-2018

239 views

Category:

Documents


4 download

TRANSCRIPT

Page 1: API 603 STAINLESS STEEL VALVES - RazValve Pacificrazvalve.com/wp-content/uploads/2016/10/Emico-SS-GGC-Catalogue.pdf · api 603 stainless steel valves ... comply with api & asme standards

ANSI Class 150 and 300GATE, GLOBE & CHECK VALVES

Y-STRAINERS

API 603 STAINLESS STEEL VALVES

OneSteel Trading Limited ABN 50 007 519 646Valves & Actuation National Office - Phone: 03 9566 9776 • Fax: 03 9566 9735

[email protected]

CONTACT YOUR NEAREST ONESTEEL OFFICE

Doc 73 October 2003

Page 2: API 603 STAINLESS STEEL VALVES - RazValve Pacificrazvalve.com/wp-content/uploads/2016/10/Emico-SS-GGC-Catalogue.pdf · api 603 stainless steel valves ... comply with api & asme standards

EMICO STAINLESS STEEL VALVES

COMPLY WITH API & ASME STANDARDS AND

ARE WIDELY USED IN CHEMICAL,

PETROCHEMICAL, FOOD & BEVERAGE, PULP &

PAPER, MINING AND OTHER PROCESS PLANTS

THROUGHOUT THE WORLD.

EMICO VALVES ARE MANUFACTURED UNDER

STRICT QUALITY CONTROL AND ARE SUITABLE

FOR USE IN CORROSION RESISTANT

APPLICATIONS.

OneSteel has taken reasonable care to ensure accuracy of the material in this ‘catalogue’ but you should not rely on the whole or any part of the information whichis subject to change without notice for reasons including error rectification, product discontinuation, new product introduction. OneSteel expresslydisclaims all liability whatsoever for (including any direct or indirect loss or damage, costs or expenses howsoever incurred by any person) or reliance on the wholeor any part of the information contained in or omitted from this ‘catalogue’ and recommends that you verify any information with your independent expert adviserand rely solely on that adviser’s recommendations.

Flanged end valve ratings terminate at 538°C (1000°F).

ValveClosure

TestPressure

Hydrostatic ShellTest Pressure

CLASS

°C-29~+38

93149204260316343371399427454482510538

°F-20~+100

2003004005006006507007508008509009501000

psig275235205190170140125110958065503520

psig275235215195170140125110958065503520

psig720600540495465435430425415405395390380320

psig720620560515480450445430425420420415385350

ANSI-150 ANSI-300Service Temperature CF8 CF8M CF8 CF8M

Hydrostatic

Air

425psig 1100psig

303psig 792psig

80psig 80psig

PRESSURE TEMPERATURE RATINGSASME B16.34-1996

Page 3: API 603 STAINLESS STEEL VALVES - RazValve Pacificrazvalve.com/wp-content/uploads/2016/10/Emico-SS-GGC-Catalogue.pdf · api 603 stainless steel valves ... comply with api & asme standards

C O N T E N T S

• ANSI 150 & 300 CAST STAINLESS STEEL GATE VALVES - pg 2/3

• ANSI 150 & 300 CAST STAINLESS STEEL GLOBE VALVES - pg 4/5

• ANSI 150 & 300 CAST STAINLESS STEEL CHECK VALVES - pg 6/7

• ANSI 150 CAST STAINLESS STEEL Y-STRAINER - pg 8

ANSI 150 CAST STAINLESS STEELY-STRAINER

DESCRIPTION

DESIGN STANDARDS

TEST PRESSURE

Raised Face flanged ends toANSI Class 150, bolted cover.Size range: 15mm through 300mm.

• Design - ASME B16.34• Shell Wall Thickness - ASME B16.34• Pressure /Temperature Rating -

ASME B16.34• Flange Dimension - ASME B16.5• Flange Gasket Facing -

ASME B16.5 (3.2 to 6.3 microns)

Per API 598 standards• ANSI 150 Shell (by Water) -425psig

8

SIZEB

60.570

79.598.5120.5139.5152.5190.5216

241.5298.5362432

in1/23/41

1 1/22

2 1/2345681012

mm15202540506580100125150200250300

E15202540506580100125150200250300

H7575100120140175196244277320390430600

L120140150190210250280340380420500700780

A8998108127152178190229254279343406483

C3543517392105127157186216270324381

D11.211.211.214.315.917.519.123.923.925.428.630.231.8

nø-d4-164-164-164-164-194-194-198-198-228-228-2212-2512-25

ANSI-150

n-ød

A B C E

D

L

H

45°

5 63 21 4

ANSI CLASS 150

DIMENSIONS (mm)

Y-

ST

RA

INE

R

Fig EAS-405

PARTS AND MATERIAL

NO. PARTS NAME MATERIAL 123456

BODYBONNETGASKETSCREENPLUGBONNET BOLT/ NUT

CF8MCF8M

PTFE (Option: Graphite)SS 316 *AISI 316

SUS 304 /AISI 304

* Screen for 15mm-50mm is punched stainless steel plate with 1mm Ø holes.Screen for 65mm and above is punched stainless steel plate with 1.5mm Ø holes.

Page 4: API 603 STAINLESS STEEL VALVES - RazValve Pacificrazvalve.com/wp-content/uploads/2016/10/Emico-SS-GGC-Catalogue.pdf · api 603 stainless steel valves ... comply with api & asme standards

ANSI 150 & 300 CAST STAINLESS STEELGATE VALVES

PARTS AND MATERIAL

DESCRIPTION

DESIGN STANDARDS

TEST PRESSURE

Raised Face flanged ends to ANSI Class 150and ANSI Class 300. Integral T-head stem,fully guided flexible wedge, self-aligning gland,integral body seats, outside screw and yoke,rising stem, non-rising handwheel.Size range: ANSI 150 - 15mm through 400mm.

ANSI 300 - 15mm through 300mm

• Design - API 603• Shell Wall Thickness - API 603• Pressure /Temperature Rating - ASME B16.34• Face to Face Dimension - ASME B16.10• Flange Dimension - ASME B16.5• Flange Gasket Facing -

ASME B16.5 (3.2 to 6.3 microns)

Per API 598 standards• ANSI 150 Shell (by Water) -425psig• ANSI 150 Seat (by Water) -303psig

(by Air) - 80psig• ANSI 300 Shell (by Water) -1100psig• ANSI 300 Seat (by Water) -792psig

(by Air) - 80psig

2

1234567891011

BODYBONNETSTEMDISCGLAND FLANGEGLAND PACKINGHANDWHEELBODY/BONNET GASKETBODY/BONNET BOLTINGGLAND BOLT/NUTYOKE SLEEVE

Stainless Steel ASTM A351 CF8MStainless Steel ASTM A351 CF8MAISI-316ASTM A351 CF8MASTM A351 CF8MPTFE (Option: Graphite)Ductile IronPTFE (Option: Graphite)ASTM A193 B8 /A194 Gr. 8ASTM A193 B8 /A194 Gr. 8Ductile Iron

NO. PARTS NAME MATERIAL

GA

TE

VA

LV

ES

ANSI 150 & 300 CAST STAINLESS STEELCHECK VALVES

E

n-ød

L

D

AB

C

H

5 8 2 4 7

3 6 1

E

n-ød

AB

C

H

L

D

5 8 2 4 7

3 6 1

7

ANSI CLASS 150

ANSI CLASS 300

DIMENSIONS (mm)

DIMENSIONS (mm)

SIZEB

60.570

79.598.5120.5139.5152.5190.5216

241.5298.5362432

in1/23/41

1 1/22

2 1/2345681012

mm15202540506580100125150200250300

E15202540506580100125150200250300

H63667585110135135170170210250315376

L108117127165203216241292330356495622698

A8998108127152178190229254279343406483

C3543517392105127157186216270324381

D11.211.211.214.315.917.519.123.923.925.428.630.231.8

nø-d4-164-164-164-164-194-194-198-198-228-228-2212-2512-25

ANSI-150

SIZEB

66.582.589

114.5127149168200235270330

387.5451

in1/23/41

1 1/22

2 1/2345681012

mm15202540506580100125150200250300

E15202540506580100125150200250300

H8090100116129143164177217231291319360

L152178216241267292318356400444533622711

A95117124156165190210254279318381444521

C3543517392105127157186216270324381

D14.315.917.520.722.325.428.631.835

36.641.347.750.8

nø-d4-164-194-194-228-198-228-228-228-2212-2212-2516-2916-32

ANSI-300

Fig EAS-306

Fig EAS-315

Page 5: API 603 STAINLESS STEEL VALVES - RazValve Pacificrazvalve.com/wp-content/uploads/2016/10/Emico-SS-GGC-Catalogue.pdf · api 603 stainless steel valves ... comply with api & asme standards

ANSI 150 & 300 CAST STAINLESS STEELCHECK VALVES

PARTS AND MATERIAL

DESCRIPTION

DESIGN STANDARDS

TEST PRESSURE

Raised Face flanged ends to ANSI Class 150and ANSI Class 300. Swing type disc, integralbody seat, bolted cover.Size range: ANSI 150 - 15mm through 300mm.

ANSI 300 - 15mm through 300mm

• Design - ASME B16.34• Shell Wall Thickness -

ASME B16.34• Pressure /Temperature Rating -

ASME B16.34• Face to Face Dimension -

ASME B16.10• Flange Dimension - ASME B16.5• Flange Gasket Facing -

ASME B16.5 (3.2 to 6.3 microns)

Per API 598 standards• ANSI 150 Shell (by Water) -425psig• ANSI 150 Seat (by Water) -303psig

(by Air) - 80psig• ANSI 300 Shell (by Water) -1100psig• ANSI 300 Seat (by Water) -792psig

(by Air) - 80psig

6

12345678

BODYCOVERDISCDISC NUTBODY/COVER BOLTINGARMBODY/COVER GASKETHINGE PIN

Stainless Steel ASTM A351 CF8MStainless Steel ASTM A351 CF8MASTM A351 CF8MSS 316ASTM A193 B8 /A194 Gr. 8ASTM A351 CF8MPTFE (Option: Graphite)SS 316

NO. PARTS NAME MATERIAL

CH

EC

K V

AL

VE

S

ANSI 150 & 300 CAST STAINLESS STEELGATE VALVES

A B C

DL

n-ød

E

H

W

(OPE

N)

7

11

10

5

6

3

9

2

8

1

4

A

(OPE

N)

B CH

n-ød

D

E

W

7

11

10

5

6

3

9

2

8

1

4

L

3

ANSI CLASS 150

ANSI CLASS 300

SIZEA8998108117127152178190229254279343406483533597

in1/23/41

1 1/41 1/2

22 1/2

3456810121416

mm1520253240506580100125150200250300350400

E1520253240506580100125150200250300350400

H1902002302702803203904155106007109001117132414801658

W9090100140140160180200225250290330350400550600

L108117127140165178190203229254267292330356381406

B60.570

79.589

98.5120.5139.5152.5190.5216

241.5298.5362432

476.5539.7

C354351647392105127157186216270324381413470

D11.211.211.214.314.315.917.519.123.923.925.428.630.231.835

36.6

nø-d4-164-164-164-164-164-194-194-198-198-228-228-2212-2512-2512-2916-29

ANSI-150

DIMENSIONS (mm)

SIZEA95117124156165190210254279318381444521

in1/23/41

1 1/22

2 1/2345681012

mm15202540506580100125150200250300

E15202540506580100125150200250300

H16018021028033039045452563973993311381338

W100120140160180200224250250300350400500

L140152165190216241283305381403419457502

B66.582.589

114.5127149168200235270330

387.5451

C3543517392105127157186216270324381

D14.315.917.520.722.325.428.631.835

36.641.347.750.8

nø-d4-164-194-194-228-198-228-228-228-2212-2212-2516-2916-32

ANSI-300

DIMENSIONS (mm)

Fig EAS-105

Fig EAS-115

Page 6: API 603 STAINLESS STEEL VALVES - RazValve Pacificrazvalve.com/wp-content/uploads/2016/10/Emico-SS-GGC-Catalogue.pdf · api 603 stainless steel valves ... comply with api & asme standards

ANSI 150 & 300 CAST STAINLESS STEELGLOBE VALVES

ANSI 150 & 300 CAST STAINLESS STEELGLOBE VALVES

PARTS AND MATERIAL

DESCRIPTION

DESIGN STANDARDS

TEST PRESSURE

Raised Face flanged ends to ANSI Class 150and ANSI Class 300. Integral T-head stem,swivel disc, self-aligning gland,integral seat, bolted bonnet, outside screw andyoke, rising stem and handwheel.Size range: ANSI 150 - 15mm through 300mm.

ANSI 300 - 15mm through 300mm

• Design - ASME B16.34• Shell Wall Thickness -

ASME B16.34• Pressure /Temperature Rating -

ASME B16.34• Face to Face Dimension -

ASME B16.10• Flange Dimension - ASME B16.5• Flange Gasket Facing -

ASME B16.5 (3.2 to 6.3 microns)

Per API 598 standards• ANSI 150 Shell (by Water) -425psig• ANSI 150 Seat (by Water) -303psig

(by Air) - 80psig• ANSI 300 Shell (by Water) -1100psig• ANSI 300 Seat (by Water) -792psig

(by Air) - 80psig

4

H

n-ød

D

L

W

B C EA

(OPE

N)

7

11

5

2

6

3

4

1

10

9

8

H

n-ød

D

L

W

B C EA

(OPE

N)

11

5

6

8

3

4

10

9

2

7

1

5

ANSI CLASS 150

ANSI CLASS 300

1234567891011

BODYBONNETSTEMDISCGLAND FLANGEGLAND PACKINGHANDWHEELBODY/BONNET GASKETBODY/BONNET BOLTINGGLAND BOLT/NUTYOKE SLEEVE

Stainless Steel ASTM A351 CF8MStainless Steel ASTM A351 CF8MAISI-316ASTM A351 CF8MASTM A351 CF8MPTFE (Option: Graphite)Ductile IronPTFE (Option: Graphite)ASTM A193 B8 /A194 Gr. 8ASTM A193 B8 /A194 Gr. 8Ductile Iron

NO. PARTS NAME MATERIAL

DIMENSIONS (mm)

DIMENSIONS (mm)

SIZEA8998108127152178190229254279343406483

in1/23/41

1 1/22

2 1/2345681012

mm15202540506580100125150200250300

E15202540506580100125150200250300

H190200230240250270290350410520570670736

W90100100140160180200225250300350400500

L108117127165203216241292356406495622698

B60.570

79.598.5120.5139.5152.5190.5216

241.5298.5362432

C3543517392105127157186216270324381

D11.211.211.214.315.917.519.123.923.925.428.630.231.8

nø-d4-164-164-164-164-194-194-198-198-228-228-2212-2512-25

ANSI-150

SIZEA95117124156165190210254279318381444521

in1/23/41

1 1/22

2 1/2345681012

mm15202540506580100125150200250300

E15202540506580100125150200250300

H165173175225268301330390464510570630720

W100100140160180200220250320350400450500

L152178203229267292318356400444559622711

B66.582.589

114.5127149168200235270330

387.5451

C3543517392105127157186216270324381

D14.315.917.520.722.325.428.631.835

36.641.347.750.8

nø-d4-164-194-194-228-198-228-228-228-2212-2212-2516-2916-32

ANSI-300

GL

OB

E V

AL

VE

S

Fig EAS-205

Fig EAS-215

Page 7: API 603 STAINLESS STEEL VALVES - RazValve Pacificrazvalve.com/wp-content/uploads/2016/10/Emico-SS-GGC-Catalogue.pdf · api 603 stainless steel valves ... comply with api & asme standards

ANSI 150 & 300 CAST STAINLESS STEELGLOBE VALVES

ANSI 150 & 300 CAST STAINLESS STEELGLOBE VALVES

PARTS AND MATERIAL

DESCRIPTION

DESIGN STANDARDS

TEST PRESSURE

Raised Face flanged ends to ANSI Class 150and ANSI Class 300. Integral T-head stem,swivel disc, self-aligning gland,integral seat, bolted bonnet, outside screw andyoke, rising stem and handwheel.Size range: ANSI 150 - 15mm through 300mm.

ANSI 300 - 15mm through 300mm

• Design - ASME B16.34• Shell Wall Thickness -

ASME B16.34• Pressure /Temperature Rating -

ASME B16.34• Face to Face Dimension -

ASME B16.10• Flange Dimension - ASME B16.5• Flange Gasket Facing -

ASME B16.5 (3.2 to 6.3 microns)

Per API 598 standards• ANSI 150 Shell (by Water) -425psig• ANSI 150 Seat (by Water) -303psig

(by Air) - 80psig• ANSI 300 Shell (by Water) -1100psig• ANSI 300 Seat (by Water) -792psig

(by Air) - 80psig

4

H

n-ød

D

L

W

B C EA

(OPE

N)

7

11

5

2

6

3

4

1

10

9

8

H

n-ød

D

L

W

B C EA

(OPE

N)

11

5

6

8

3

4

10

9

2

7

1

5

ANSI CLASS 150

ANSI CLASS 300

1234567891011

BODYBONNETSTEMDISCGLAND FLANGEGLAND PACKINGHANDWHEELBODY/BONNET GASKETBODY/BONNET BOLTINGGLAND BOLT/NUTYOKE SLEEVE

Stainless Steel ASTM A351 CF8MStainless Steel ASTM A351 CF8MAISI-316ASTM A351 CF8MASTM A351 CF8MPTFE (Option: Graphite)Ductile IronPTFE (Option: Graphite)ASTM A193 B8 /A194 Gr. 8ASTM A193 B8 /A194 Gr. 8Ductile Iron

NO. PARTS NAME MATERIAL

DIMENSIONS (mm)

DIMENSIONS (mm)

SIZEA8998108127152178190229254279343406483

in1/23/41

1 1/22

2 1/2345681012

mm15202540506580100125150200250300

E15202540506580100125150200250300

H190200230240250270290350410520570670736

W90100100140160180200225250300350400500

L108117127165203216241292356406495622698

B60.570

79.598.5120.5139.5152.5190.5216

241.5298.5362432

C3543517392105127157186216270324381

D11.211.211.214.315.917.519.123.923.925.428.630.231.8

nø-d4-164-164-164-164-194-194-198-198-228-228-2212-2512-25

ANSI-150

SIZEA95117124156165190210254279318381444521

in1/23/41

1 1/22

2 1/2345681012

mm15202540506580100125150200250300

E15202540506580100125150200250300

H165173175225268301330390464510570630720

W100100140160180200220250320350400450500

L152178203229267292318356400444559622711

B66.582.589

114.5127149168200235270330

387.5451

C3543517392105127157186216270324381

D14.315.917.520.722.325.428.631.835

36.641.347.750.8

nø-d4-164-194-194-228-198-228-228-228-2212-2212-2516-2916-32

ANSI-300

GL

OB

E V

AL

VE

S

Fig EAS-205

Fig EAS-215

Page 8: API 603 STAINLESS STEEL VALVES - RazValve Pacificrazvalve.com/wp-content/uploads/2016/10/Emico-SS-GGC-Catalogue.pdf · api 603 stainless steel valves ... comply with api & asme standards

ANSI 150 & 300 CAST STAINLESS STEELCHECK VALVES

PARTS AND MATERIAL

DESCRIPTION

DESIGN STANDARDS

TEST PRESSURE

Raised Face flanged ends to ANSI Class 150and ANSI Class 300. Swing type disc, integralbody seat, bolted cover.Size range: ANSI 150 - 15mm through 300mm.

ANSI 300 - 15mm through 300mm

• Design - ASME B16.34• Shell Wall Thickness -

ASME B16.34• Pressure /Temperature Rating -

ASME B16.34• Face to Face Dimension -

ASME B16.10• Flange Dimension - ASME B16.5• Flange Gasket Facing -

ASME B16.5 (3.2 to 6.3 microns)

Per API 598 standards• ANSI 150 Shell (by Water) -425psig• ANSI 150 Seat (by Water) -303psig

(by Air) - 80psig• ANSI 300 Shell (by Water) -1100psig• ANSI 300 Seat (by Water) -792psig

(by Air) - 80psig

6

12345678

BODYCOVERDISCDISC NUTBODY/COVER BOLTINGARMBODY/COVER GASKETHINGE PIN

Stainless Steel ASTM A351 CF8MStainless Steel ASTM A351 CF8MASTM A351 CF8MSS 316ASTM A193 B8 /A194 Gr. 8ASTM A351 CF8MPTFE (Option: Graphite)SS 316

NO. PARTS NAME MATERIAL

CH

EC

K V

AL

VE

S

ANSI 150 & 300 CAST STAINLESS STEELGATE VALVES

A B C

DL

n-ød

E

H

W

(OPE

N)

7

11

10

5

6

3

9

2

8

1

4

A

(OPE

N)

B CH

n-ød

D

E

W

7

11

10

5

6

3

9

2

8

1

4

L

3

ANSI CLASS 150

ANSI CLASS 300

SIZEA8998108117127152178190229254279343406483533597

in1/23/41

1 1/41 1/2

22 1/2

3456810121416

mm1520253240506580100125150200250300350400

E1520253240506580100125150200250300350400

H1902002302702803203904155106007109001117132414801658

W9090100140140160180200225250290330350400550600

L108117127140165178190203229254267292330356381406

B60.570

79.589

98.5120.5139.5152.5190.5216

241.5298.5362432

476.5539.7

C354351647392105127157186216270324381413470

D11.211.211.214.314.315.917.519.123.923.925.428.630.231.835

36.6

nø-d4-164-164-164-164-164-194-194-198-198-228-228-2212-2512-2512-2916-29

ANSI-150

DIMENSIONS (mm)

SIZEA95117124156165190210254279318381444521

in1/23/41

1 1/22

2 1/2345681012

mm15202540506580100125150200250300

E15202540506580100125150200250300

H16018021028033039045452563973993311381338

W100120140160180200224250250300350400500

L140152165190216241283305381403419457502

B66.582.589

114.5127149168200235270330

387.5451

C3543517392105127157186216270324381

D14.315.917.520.722.325.428.631.835

36.641.347.750.8

nø-d4-164-194-194-228-198-228-228-228-2212-2212-2516-2916-32

ANSI-300

DIMENSIONS (mm)

Fig EAS-105

Fig EAS-115

Page 9: API 603 STAINLESS STEEL VALVES - RazValve Pacificrazvalve.com/wp-content/uploads/2016/10/Emico-SS-GGC-Catalogue.pdf · api 603 stainless steel valves ... comply with api & asme standards

ANSI 150 & 300 CAST STAINLESS STEELGATE VALVES

PARTS AND MATERIAL

DESCRIPTION

DESIGN STANDARDS

TEST PRESSURE

Raised Face flanged ends to ANSI Class 150and ANSI Class 300. Integral T-head stem,fully guided flexible wedge, self-aligning gland,integral body seats, outside screw and yoke,rising stem, non-rising handwheel.Size range: ANSI 150 - 15mm through 400mm.

ANSI 300 - 15mm through 300mm

• Design - API 603• Shell Wall Thickness - API 603• Pressure /Temperature Rating - ASME B16.34• Face to Face Dimension - ASME B16.10• Flange Dimension - ASME B16.5• Flange Gasket Facing -

ASME B16.5 (3.2 to 6.3 microns)

Per API 598 standards• ANSI 150 Shell (by Water) -425psig• ANSI 150 Seat (by Water) -303psig

(by Air) - 80psig• ANSI 300 Shell (by Water) -1100psig• ANSI 300 Seat (by Water) -792psig

(by Air) - 80psig

2

1234567891011

BODYBONNETSTEMDISCGLAND FLANGEGLAND PACKINGHANDWHEELBODY/BONNET GASKETBODY/BONNET BOLTINGGLAND BOLT/NUTYOKE SLEEVE

Stainless Steel ASTM A351 CF8MStainless Steel ASTM A351 CF8MAISI-316ASTM A351 CF8MASTM A351 CF8MPTFE (Option: Graphite)Ductile IronPTFE (Option: Graphite)ASTM A193 B8 /A194 Gr. 8ASTM A193 B8 /A194 Gr. 8Ductile Iron

NO. PARTS NAME MATERIAL

GA

TE

VA

LV

ES

ANSI 150 & 300 CAST STAINLESS STEELCHECK VALVES

E

n-ød

L

D

AB

C

H

5 8 2 4 7

3 6 1

E

n-ød

AB

C

H

L

D

5 8 2 4 7

3 6 1

7

ANSI CLASS 150

ANSI CLASS 300

DIMENSIONS (mm)

DIMENSIONS (mm)

SIZEB

60.570

79.598.5120.5139.5152.5190.5216

241.5298.5362432

in1/23/41

1 1/22

2 1/2345681012

mm15202540506580100125150200250300

E15202540506580100125150200250300

H63667585110135135170170210250315376

L108117127165203216241292330356495622698

A8998108127152178190229254279343406483

C3543517392105127157186216270324381

D11.211.211.214.315.917.519.123.923.925.428.630.231.8

nø-d4-164-164-164-164-194-194-198-198-228-228-2212-2512-25

ANSI-150

SIZEB

66.582.589

114.5127149168200235270330

387.5451

in1/23/41

1 1/22

2 1/2345681012

mm15202540506580100125150200250300

E15202540506580100125150200250300

H8090100116129143164177217231291319360

L152178216241267292318356400444533622711

A95117124156165190210254279318381444521

C3543517392105127157186216270324381

D14.315.917.520.722.325.428.631.835

36.641.347.750.8

nø-d4-164-194-194-228-198-228-228-228-2212-2212-2516-2916-32

ANSI-300

Fig EAS-306

Fig EAS-315

Page 10: API 603 STAINLESS STEEL VALVES - RazValve Pacificrazvalve.com/wp-content/uploads/2016/10/Emico-SS-GGC-Catalogue.pdf · api 603 stainless steel valves ... comply with api & asme standards

C O N T E N T S

• ANSI 150 & 300 CAST STAINLESS STEEL GATE VALVES - pg 2/3

• ANSI 150 & 300 CAST STAINLESS STEEL GLOBE VALVES - pg 4/5

• ANSI 150 & 300 CAST STAINLESS STEEL CHECK VALVES - pg 6/7

• ANSI 150 CAST STAINLESS STEEL Y-STRAINER - pg 8

ANSI 150 CAST STAINLESS STEELY-STRAINER

DESCRIPTION

DESIGN STANDARDS

TEST PRESSURE

Raised Face flanged ends toANSI Class 150, bolted cover.Size range: 15mm through 300mm.

• Design - ASME B16.34• Shell Wall Thickness - ASME B16.34• Pressure /Temperature Rating -

ASME B16.34• Flange Dimension - ASME B16.5• Flange Gasket Facing -

ASME B16.5 (3.2 to 6.3 microns)

Per API 598 standards• ANSI 150 Shell (by Water) -425psig

8

SIZEB

60.570

79.598.5120.5139.5152.5190.5216

241.5298.5362432

in1/23/41

1 1/22

2 1/2345681012

mm15202540506580100125150200250300

E15202540506580100125150200250300

H7575100120140175196244277320390430600

L120140150190210250280340380420500700780

A8998108127152178190229254279343406483

C3543517392105127157186216270324381

D11.211.211.214.315.917.519.123.923.925.428.630.231.8

nø-d4-164-164-164-164-194-194-198-198-228-228-2212-2512-25

ANSI-150

n-ød

A B C E

D

L

H

45°

5 63 21 4

ANSI CLASS 150

DIMENSIONS (mm)

Y-

ST

RA

INE

R

Fig EAS-405

PARTS AND MATERIAL

NO. PARTS NAME MATERIAL 123456

BODYBONNETGASKETSCREENPLUGBONNET BOLT/ NUT

CF8MCF8M

PTFE (Option: Graphite)SS 316 *AISI 316

SUS 304 /AISI 304

* Screen for 15mm-50mm is punched stainless steel plate with 1mm Ø holes.Screen for 65mm and above is punched stainless steel plate with 1.5mm Ø holes.

Page 11: API 603 STAINLESS STEEL VALVES - RazValve Pacificrazvalve.com/wp-content/uploads/2016/10/Emico-SS-GGC-Catalogue.pdf · api 603 stainless steel valves ... comply with api & asme standards

EMICO STAINLESS STEEL VALVES

COMPLY WITH API & ASME STANDARDS AND

ARE WIDELY USED IN CHEMICAL,

PETROCHEMICAL, FOOD & BEVERAGE, PULP &

PAPER, MINING AND OTHER PROCESS PLANTS

THROUGHOUT THE WORLD.

EMICO VALVES ARE MANUFACTURED UNDER

STRICT QUALITY CONTROL AND ARE SUITABLE

FOR USE IN CORROSION RESISTANT

APPLICATIONS.

EMICO has taken reasonable care to ensure accuracy of the material in this ‘catalogue’ but you should not rely on the whole or any part of the information whichis subject to change without notice for reasons including error recti�cation, product discontinuation, new product introduction. EMICO expresslydisclaims all liability whatsoever for (including any direct or indirect loss or damage, costs or expenses howsoever incurred by any person) or reliance on the wholeor any part of the information contained in or omitted from this ‘catalogue’ and recommends that you verify any information with your independent expert adviserand rely solely on that adviser’s recommendations.

Flanged end valve ratings terminate at 538°C (1000°F).

ValveClosure

TestPressure

Hydrostatic ShellTest Pressure

CLASS

°C-29~+38

93149204260316343371399427454482510538

°F-20~+100

200300400500600650700750800850900950

1000

psig275235205190170140125110958065503520

psig275235215195170140125110958065503520

psig720600540495465435430425415405395390380320

psig720620560515480450445430425420420415385350

ANSI-150 ANSI-300Service Temperature CF8 CF8M CF8 CF8M

Hydrostatic

Air

425psig 1100psig

303psig 792psig

80psig 80psig

PRESSURE TEMPERATURE RATINGSASME B16.34-1996

Page 12: API 603 STAINLESS STEEL VALVES - RazValve Pacificrazvalve.com/wp-content/uploads/2016/10/Emico-SS-GGC-Catalogue.pdf · api 603 stainless steel valves ... comply with api & asme standards

ANSI Class 150 and 300GATE, GLOBE & CHECK VALVES

Y- STRAINERS

API 603 STAINLESS STEEL VALVES

EMICO Australia Pty Ltd - Phone: 03 9878 8653

October 2003