appearance - arnd sauter
TRANSCRIPT
Appearance
Highaccuracy
High rigidity
High productivitySpacesaving
Overwhelming cost performance
CAT.NO.E114609.APR.5T(H)
M06J/M08JM06JC
M06D/M08D M06SD/M08SD
M06SY/M08SY
Rear chip-disposal type
1,690
1,0001,600
1,570
Right chip-disposal type
Rear chip-disposal type
Right chip-disposal type
2,060 502202,330
1,750
1,000
350
105 1,7451,850
1,630
Rear chip-disposal type
Right chip-disposal type
105 1,7451,850
1,0001,630
350
1,750
502,2002202,470
Rear chip-disposal type
Right chip-disposal type
105 1,7451,850
1,0001,630
502,200
350
2202,470
1,930
12-20, TOMIZAWA-CHO, NIHONBASHI, CHUO-KU, TOKYO 103-0006, JAPANPhone : 03-3808-1172Facsimile : 03-3808-1175
Export permission by the Japanese Government may be required for exportingour products in accordance with the Foreign Exchange and Foreign Trade Law.Please contact our sales office before exporting our products. The specifications of this catalogue are subject to change without prior notice.
CNC Lathe
1,165
1,400
1,0001,600
350
1,460
Chip conveyor(Only rear discharge is provided for M06JC.)
Safety Instructions for Coolant Selection
Use a water-soluble coolant to the cutting oil, do not use oil-based coolant.
When you plan to use an oil-based coolant, please contact Tsugami or authorized distributor at the time of inquiry.
If you use an oil-based coolant;•There is a risk of fire which hot cutting chips or cutting-heat may
ignite coolant mist.•The rase of coolant temperature of oil-based coolant is larger than
the water-soluble coolant, and it may impact to the thermal displacement of the machine significantly.
•If oil-base coolant has to be used unavoidably, an applopriate device for safety such as automatic fire extinguisher is required.
Note: High/Low speed switches at 1,350 min-1
Realizing high accuracy, high rigidity, high productivity, space saving, and overwhelming cost performanceRealizing high accuracy, high rigidity, high productivity, space saving, and overwhelming cost performance
Machining capability to achieve high productivity (Material: JIS:S45C)Machining capability to achieve high productivity (Material: JIS:S45C)
Best selection to suit for your applications
2 3
1.0 mm² Surface speed: 150 m/minFeed: 0.2 mm/revφ20 mmMachining dia. : φ55 mm
Cutting depth: 4.0 mmSurface speed: 150 m/minFeed: 0.25 mm/rev
Standard typeTurning (Cutting area) Drilling Turning (Cutting area) Drilling
Low speed spec. (Option)
Surface speed: 150 m/minFeed: 0.2mm/revM06J
M08J 2.0 mm²
φ20 mm
Surface speed: 150 m/minFeed: 0.2 mm/revφ30 mm Surface speed: 150 m/min
Feed: 0.2 mm/revφ30 mmMachining dia. : φ100 mmCutting depth: 4.0 mm
Surface speed: 150 m/minFeed: 0.5 mm/rev
1.5 mm²
Machining dia. : φ70 mmCutting depth: 3.2 mm
Machining dia. : φ50 mmCutting depth: 3.0 mm
Surface speed: 150 m/minFeed: 0.5 mm/rev
1.6 mm² Surface speed: 150 m/minFeed: 0.5 mm/rev
Main spindle
Turning (Cutting area) Drilling Turning (Cutting area) Drilling
Back spindle (SD / SY)
Surface speed: 150 m/minFeed: 0.2 mm/revD/SD/SY φ30 mm1.6 mm² Machining dia. : φ70 mm
Cutting depth: 4.0 mmSurface speed: 150 m/minFeed: 0.4 mm/rev
M06/M08D/SD/SYLive tool
Spindle speed (min-1)
Continuous operating area
Torque[N・m]
4
89.6,N・m
14.0,N・m
23.5,N・m
12
16
20
24
28
00 2,000
15004,000 6,000 8,000
S2 15 min., S3 40 % operating area
S2 30 min., operating area
750
0 1,500 3,000 4,500
M06JBelt-driven spindle
Spindle speed (min-1)
120
90
60
30
0
Torque[N・m]
15 min., S3 25 %operating area
60 min., operating area
1,200
Continuous operating area
M06/M08SD/SY
Built-in motor back spindle
Spindle speed (min-1)
60
40
20
00 1,000 2,000 3,000 4,000 5,000
Torque[N・m]
6,0001180
1500Continuous operating area
15 min., S2 operating area
Spindle speed (min-1)
30 min., S2 operating area
S3 25 % operating area
100
Continuous operating area
75
50
25
00 2,000 4,000
Torque[N・m]
6,000
M06/M08D/SD/SY
Built-in motor main spindle(High speed range)
Spindle speed (min-1)
S3 25 % operating area
Continuous operating area
200
150
100
50
00 300 600 900 1,200
Torque[N・m]
30 min., S2 operating area
1,400
M06/M08D/SD/SY
Built-in motor main spindle(Low speed range)
250
200
150
100
50
00 500 1,000 1,500
Spindle speed (min-1)
Torque[N・m]
15 min., S3 15 % operating area
Continuous operating area
M08JBelt-driven spindle(Low speed spec.)(Option)
160
120
80
40
0 0 1,500 3,000 4,500
Spindle speed (min-1)
Torque[N・m]
Continuous operating area
750
30 min., S3 60 % operating area
M08JBelt-driven spindle
(Standard)
M06J (6 inch chuck)Max. machining dia.: φ260/φ51 (Barstock) mmMax. machining length: 290 mm
Max. machining dia.: φ280/φ65 (Barstock) mmMax. machining length: 290 mm
M08J (8 inch chuck)
M06J/M08JBasic machine
Note: Shown figure includes options.
M06JC (6 inch chuck)Max. machining dia.: φ220 mm φ42 (Barstock) mm(Option)Max. machining length: 190 mm
M06JCSpace saving basic machine
Note: Shown figure includes options.
M06D (6 inch chuck)Max. machining dia.: φ260/φ51 (Barstock) mmMax. machining length: 380 mm
Max. machining dia.: φ280/φ65 (Barstock) mmMax. machining length: 380 mm
M08D (8 inch chuck)
M06D/M08DTurning center with Powerful milling
Note: Shown figure includes options.
M06SY (6 inch chuck)Max. machining dia.: φ260/φ51 (Barstock) mmMax. machining length: 380 mm
Max. machining dia.: φ280/φ65 (Barstock) mmMax. machining length: 380 mm
M08SY (8 inch chuck)
M06SY/M08SYTurning center with back spindle and Y-axis
Note: Shown figure includes options.
M06SD (6 inch chuck)Max. machining dia.: φ260/φ51 (Barstock) mmMax. machining length: 380 mm
Max. machining dia.: φ280/φ65 (Barstock) mmMax. machining length: 380 mm
M08SD (8 inch chuck)
M06SD/M08SDTurning center with back spindle
Note: Shown figure includes options.
CM axis(Main spindle) CB axis
(Back spindle)
X axis
Z axis
X axis
Z axis
X axis
Z axis
C axis(Main spindle)
X axis
Z axis
CM axis(Main spindle) CB axis
(Back spindle)
A axis
Y axisX axis
Z axis
A axis
Standard type
Turning (Cutting area) DrillingSurface speed: 200 m/minFeed: 0.2 mm/revM06JC φ20 mm0.9 mm² Machining dia. : φ50 mm
Cutting depth: 3.0 mmSurface speed: 200 m/minFeed: 0.3 mm/rev
0 2000 60004000 8000 10000
Spindle speed (min-1)
30
40
50
60
20
10
0
M06JCBelt-driven spindleTorque
[N・m]
1500
15 min., S3 25 %operating area15 min., S3 25 %operating area
min., %operating area60 min., S3 40 %operating area
Continuous operating areaContinuous operating area
1350
Basic machine for turning, drilling, and boring
・Realizes high-accuracy machining by the thermal displacement compensation
High-accuracy machining
8-station turret
・Enables turning, drilling, and boring・Realizes heavy-duty cutting by
rigid basic structure・Realizes high-productivity by
excellent machining capability・Tank capacity: 140L
Machining capability
・Overwhelming cost performance to enable big profit by small investment
Overwhelming cost performance
・High-rigidity box slide is equipped for X axis to enableheavy-duty cutting.
High rigidity
・Safety set up by interference prevention function at debug mode・Minimizes the damage to the machine with the retraction
function by an abnormal load detection
Simple operation
・Enables to create program simply by the optional interactive programming software on-board (FANUC: TURN MATE i). Cycle selection screen Cycle data input screen
・The tailstock (option) is prepared for a long workpiece or a workpiece with less clamping length.
Correspond to a long workpiece
・Environmentally-friendly LED internal illumination light is provided as standard.
LED illumination light (Standard)
4 5
Item Specifications
ID taper
Tailstock stroke
Positioning
MT No.4
100 mm(Hydraulic drive)
Manual(240 mm)
JType
PRECISION TSUGAMI
Tool post for turning
・25 mm square tools can be mounted on the turret directly, and it enables high efficiency machining.
Item Specifications
Total number of tools
Square tool shank size
Boring bar shank size
8
□25 mm
φ40/32 mm
8-station turret
Hydraulic chuck X axis
Z axis
Tailstock (option)
High rigidity headstock(belt-driven)
Note: Shown figure includes options.
JCType
PRECISION TSUGAMI
Note: Shown figure includes options.
8-station turret
Hydraulic chuck
High rigidity headstock(belt-driven)
Tool holder
X axis
Z axis
Tool holder
・Realizes high-accuracy machining by the thermal displacement compensation
High-accuracy machining
8-station turret
Simple operation
・Enables to create program simply by the optional interactive programming software on-board (FANUC: TURN MATE i).
・Safety set up by interference prevention function at debug mode・Minimizes the damage to the machine with the retraction function
by an abnormal load detection
Overwhelming cost performance
・Overwhelming cost performance to enable big profit by small investment
Space saving basic machine for turning, drilling and boringSpace saving
・High-rigidity box slide is equipped for X axis to enable heavy-duty cutting.
High rigidity
Tool post for turning
・20-mm square tools can be mounted on the turret directly, and it enables high efficiency machining.
Item Specifications
Total number of tools
Square tool shank size
Boring bar shank size
8
□20 mm
φ25 mm
・Compact machine width 1,165 mm Improve productivity by arranging phural machines adjacently
・Height 1400 mmEasy supervision of factory by the low height machine
1,165
1,690Similar machine of 6 inch class: 2.65m2
35% reducing of floor space
MO6JC1.7m2
1,165
1,40
0
2,310
1,60
0
2,25
0
Work stocker
Standard machine Machine with NC loader
Machining capability
・Enables turning, drilling, and boring・Realizes heavy-duty cutting by rigid basic structure・Realizes high-productivity by excellent machining capability
・Environmentally-friendly LED internal illumination light is provided as standard.
LED illumination light (Standard)
Turning center with back spindle
・Realizes high-accuracy machining by the thermal displacement compensation
・High accuracy machining with less vibration by using built-in motor on main spindle and back spindle.
・Cutting-off side can be machined with back spindle, and secondary machining is unnecessary.
・Enables complex machining such as turning, drilling, boring, cross-drilling and milling.
・Built-in motor is equipped on main spindle and back spindle.・Realizes heavy-duty machining by rigid basic structure・Powerful milling capability・Tank capacity: 196L
Back spindle 12-station turret
・Overwhelming cost performance to enable big profit by small investment even turning center with back spindle
SDType
PRECISION TSUGAMI
6 7
Note: Shown figure includes options.
・Safety set up by interference prevention function at debug mode
・Minimizes the damage to the machine with the retraction function by an abnormal load detection
Cycle selection screenSimulation screen
・Enables to create program simply by the optional interactive programming software on-board (FANUC: MANUAL GUIDE i ).
・Live tools (option) can be mounted on all positions of 12-station turret, and realizing milling operation.
Item Specifications
Total number of live toolsMax. spindle speed
Applicable collet
Max.125,000 min-1
ER25-φD
φ16Gripping sizeDrill
End mill
・Environmentally-friendly LED internal illumination light is provided as standard.
Back spindle(Built-in motor)
Hydraulic chuck
X axis
Z axis
A axis
Front live tool/Back live tool
Cross live tool
ID tool holderOD tool holder
12-station turret
Main spindle(Built-in motor)
Hydraulic chuck
CM axis(Main spindle) CB axis
(Back spindle)
Machining capability Simple operation
High accuracy machining
Live tools can be mounted on all positions.
Overwhelming cost performance
High accuracy machining
Machining capability Overwhelming cost performance
Simple operation
Correspond to a long workpiece
Turning center with powerful milling
・Realizes high-accuracy machining by the thermal displacement compensation
・High accuracy machining with less vibration by using built-in motor on main spindle.
12-station turret
・Enables complex machining such as turning, drilling, boring, cross-drilling and milling.
・Built-in motor is equipped on the main spindle.
・Realizes heavy-duty machining by rigid basic structure
・Powerful milling capability・Tank capacity: 160L
・Overwhelming cost performance to enable big profit by small investment even turning center
・Enables to create program simply by the optional interactive programming software on-board (FANUC: MANUAL GUIDE i ).
・Safety set up by interference prevention function at debug mode
・Minimizes the damage to the machine with the retraction function by an abnormal load detection
Cycle selection screenSimulation screen
・The tailstock (option) is prepared for a long workpiece or a workpiece with less clamping length.
Item Specifications
ID taper
Tailstock stroke
Positioning
MT No.4
100 mm(Hydraulic drive)
Manual(220 mm)
・Environmentally-friendly LED internal illumination light is provided as standard.
DType
PRECISION TSUGAMI
Live tools can be mounted on all positions.
Item Specifications
Total number of live toolsMax. spindle speed
Applicable collet
Max.125,000 min-1
ER25-φD
φ16Gripping sizeDrill
End mill
LED illumination light (Standard)
12-station turret
Main spindle(Built-in motor)
Hydraulic chuck
Front live tool
Cross live tool
ID tool holderOD tool holder
X axis
Z axis
Note: Shown figure includes options.
C axis(Main spindle)
Tailstock (option)
・Live tools (option) can be mounted in all the positions of the 12-station turret. Processing such as cross drilling or front off-center drilling becomes possible.
LED illumination light (Standard)
・Realizes high-accuracy machining by the thermal displacement compensation
・High accuracy machining with less vibration by using built-in motor for main spindle and back spindle.
・Enables diverse machining by ±50 mm long stroke by Y-axis control.
Y-axis machining
Back spindle 12-station turret
Turning center with back spindle and Y axis
・Enables machining of complicated workpiece by Y-axis control・Cutting-off side can be machined with back spindle, and secondary machining is unnecessary.・Enables complex machining such as turning, drilling, boring, cross-drilling and milling.・Built-in motor is equipped on main spindle and back spindle.・Realizes heavy-duty machining by rigid basic structure・Powerful milling capability・Tank capacity: 196L
・Overwhelming cost performance to enable big profit by small investment even turning center with back spindle and Y axis
SYTypePRECISION TSUGAMI
8 9
Note: Shown figure includes options.
・Safety set up by interference prevention function at debug mode・Minimizes the damage to the machine with the retraction function by an abnormal load detection
・Enables to create program simply by the optional interactive programming software on-board (FANUC: MANUAL GUIDE i ).
Cycle selection screenSimulation screen
・Live tools (option) can be mounted on all positions of 12-station turret, and realizing milling operation.
・Environmentally-friendly LED internal illumination light is provided as standard.
・High-rigidity box slide is equipped for X and Y axis to enable heavy-duty machining.
Back spindle(Built-in motor)
Hydraulic chuck
Front live tool/Back live tool
Cross live tool
ID tool holderOD tool holder
Main spindle(Built-in motor)
12-station turret
Hydraulic chuckX axis
Z axis
Y axis
A axisCM axis(Main spindle) CB axis
(Back spindle)
Item Specifications
Total number of live toolsMax. spindle speedApplicable collet
Max.125,000 min-1ER25-φD
φ16Gripping sizeDrill
End mill
Machining capability Simple operation
High accuracy machining
Live tools can be mounted on all positions.
Overwhelming cost performance
High rigidity
PRECISION TSUGAMIPRECISION TSUGAMI
M06JCM06JC
Tool holder (Option)
LED illumination light (Standard)
M06J/M08J
M06JC
OD holder Ⅱ3295-H030
OD tool(□25)
ID holder(φ32, φ40)3295-H010 (φ40)3295-H020 (φ32)
(Morse taper hole)Drill sleeve(φ32, φ40)
Boring sleeve(φ32, φ40)
OD holder Ⅰ3295-H040
Live center
Double drill holder (φ25)3297-H020
Drill holder (φ25)3297-H010
Boring sleeve3297-H100
Boring sleeve3297-H110
Boring sleeve3297-H100
End face holder3297-H030
OD tool(□20)
M06D/M08DM06SD/M08SDM06SY/M08SY
Live center(for D type)
*Caution: No back tools can not be mounted on the inner side tool position.
Front drill holder3295-H230
Double drill holder(for SD/SY)3295-H220
Turning holder(□25) (for D)3295-H260
Double turning holder(□25) (for SD/SY)3295-H210
End face live tool (back) 3295-Y301 (Single)
Back drill holder(back offset)
(for SD/SY) 3295-H300
Front drill holder(front offset)3295-H290
Double drill holder (back offset)
(for SD/SY) 3295-H280
Double drill holder (front offset)3295-H270
* * *
End face live tool (front)3295-Y171 (Single)3295-Y1201 (Double) (for SY)
Cross live tool3295-Y161 (Single)3295-Y1191 (Double) (for SY)
End face live tool (back) 3295-Y1651 (Single)3295-Y1661 (Double) (for SY)
Control function
PRECISION TSUGAMIPRECISION TSUGAMI
Chuck system (Option)
Option
Wide variety of chucks by designing in accordance with the workpiece shape.
Workpiece gripping direction
Radial directionWedge type chuck
Drawback type chuck
Collet chuck
Hollow chuck
Solid chuck
Inclined drawback type
Arc motion type
Drawback type after parallel shifting
Finger chuck
Radial + axial direction
Axial direction
3-jaw chuck
2-jaw/4-jaw chuck
3-jaw chuck
2-jaw/4-jaw chuckAutomatic programing software (Option)
Retraction function by an abnormal load detection (standard)
Creating a rectangular area from the machine components as the interference area. (Red shaded area is interference area)
When load level exceeds the setting level that is set based on the data such as the collision and cutting tool breakage, an alarm will occur, and make the slide to move to the retracting direction immediately to minimize damage to the machine.
Interference prevention function at debug mode (standard)When the machine enters into the interference area in debug mode, the axis stops moving and the alarm occurs.
Compensation M code
Saturation timeElapsed
Unexpired
Previous measured valuesMeasurement operation
X-axis compensation
End
Setting a reference value and time to saturation in advance.
After the saturation, the compensation is made with the previous data.
Compensation corrects the difference between the measurement value and reference value.
Thermal displacement compensation (standard)Compensation is performed by measuring the thermal displacement by the touch sensor installed on the X-axis slide.
Cycle selection screen Cycle data input screen
M06J/M08J/M06JC Preparing the optional interactive programming software on-board TURN MATE i (FANUC)
・Entering data according to the map that is displayed on the screen.Processing without NC program is possible.
・Continuous operation of the processing cycle (up to 20 pcs)
・ISO program conversion function from the processing cycle.Can be converted to the ISO program from the "TURN MATE i" dedicated program.
10 11
Cycle selection screenSimulation screen
M06D/M08D/M06SD/M08SD/M06SY/M08SYPreparing the optional interactive programming software on-board MANUAL GUIDE i (FANUC)
・Entering data according to the map that is displayed on the screen.
・Simulation by animation
・ISO program conversion function from the processing cycle.Can be converted to the ISO program from the MANUAL GUIDE i (FANUC) dedicated program. Chip conveyor
Installed direction can be selected
NameMaterialFeatures
Shape
Hinge typeFor steel (general purpose type)
For long swarf
Hinge plate
Tailstock
Work catcher Work conveyor
NC loader
Enables to be selected either from the machine right side or the machine rear side Appropriate machine layout can be selected.(Only rear discharge is provided for M06JC.)
(This is provided as option for M06J, M08J, M06D and M08D)
Processing for a long workpiece or a workpiece with less clamping length can be possible by this tailstock.
Work stocker
Loader hand
B axis (longitudinal)
Y axis (vertical)
Specifications Standard accessories
Machine options and NC accessories
PRECISION TSUGAMIPRECISION TSUGAMI
Machine specification
380 mm
JIS A2‐6φ73 mm
φ100 mm12
□25 mmφ40 mm
4,500 min-1
φ140 flatφ59/φ80 mm
6 inch5,000 min-1
7.5/11 kW5.5/7.5 kW
2.2 (30 min-1)/3.7 (15 min-1) kWX: 221 mm Z: 400 mmA: 506 mm Y: ±50 mmX: 24 m/min Z: 27 m/minA: 30 m/min Y: 12 m/min
30 kVA0.5 MPa
100 NL/min2,470 x 1,850 x 1,930mm
5,900 kg
380 mm
JIS A2‐6φ73 mm
φ100 mm12
□25 mmφ40 mm
4,500 min-1
φ140 flatφ59/φ80 mm
6 inch5,000 min-1
7.5/11 kW5.5/7.5 kW
2.2 (30 min-1)/3.7 (15 min-1) kWX: 260 mm Z: 400 mm
A: 506 mmX: 24 m/min Z: 27 m/min
A: 30 m/min28.6 kVA0.5 MPa
100 NL/min2,470 x 1,850 x 1,750 mm
5,600 kg
380 mm
JIS A2‐6φ73 mm
φ100 mm12
□25 mmφ40 mm----
5,000 min-1
7.5/11 kW-
2.2 (30 min-1)/3.7 (15 min-1) kWX: 260 mm Z: 400 mm
-X: 24 m/min Z: 27 m/min
-24 kVA0.5 MPa
100 NL/min2,330 x 1,850 x 1,750 mm
5,000 kg
290 mm
JIS A2‐6φ73 mm
φ100 mm8
□25 mmφ40 mm-----
--
X: 160 mm Z: 330 mm-
X: 24 m/min Z: 27 m/min-
0.5 MPa100 NL/min
1,690 x 1,570 x 1,600 mm3,600 kg
190 mm6 inch
4,500 min-1
140Fφ52 mmφ80 mm
8□20 mmφ25 mm-----
5.5/7.5 kW--
X: 130 mm Z: 230 mm-
X,Z: 24 m/min-
18 kVA0.5 MPa
100 NL/min1,165 x 1,460 x 1,600 mm
2,380 kg
Precaution: Always use the water soluble coolant.
Note 1: Right discharge or rear discharge
M06SYM06JM06JC M06D M06SD M08SDM08DM08J
φ260/φ51(Barstock) mm
6 inch
4,500 min-1 4,500 min-14,000 min-1 (Standard spec.)/1,500 min-1 (Low speed spec.)/
(Option)4,500 min-1
φ260/φ51(Barstock) mm
φ260/φ51(Barstock) mm
φ260/φ51(Barstock) mm
φ220/φ42(Barstock) mm
φ280/φ65(Barstock) mm
φ280/φ65(Barstock) mm
φ280/φ65(Barstock) mm
φ280/φ65(Barstock) mm
8 inch6 inch 8 inch 6 inch 8 inch 6 inch 8 inch
4,500 min-1
Max. machining dia.
Max. machining lengthChuck size
Max. spindle speed
Shape of spindle endSpindle through IDSpindle bearing IDNumber of stationsOD tool shankDrill holder hole dia.Max. back spindle speedBack spindle end Back spindle through ID/Back spindle bearing IDBack spindle chuckMax. live tool speedMain spindle motorBack spindle motorLive tool motorStroke X/ZStroke A/YRapid traverse rate X/ZRapid traverse rate A/YPower source requirementsCompressed air requirementAir discharge rateSize (Width x depth x height)Weight
Item M08SY
5.5/7.5 kW 9/11 kW
23 kVA 27 kVA
Machine options
NC accessories
Chasing functionContinuous thread cuttingManual pulse generatorMemory card I/O interfaceRS232C I/O interfaceBack ground editingRun time/parts number displayCustom macroConstant surface speed controlTool geometry / wear offsetProgrammable data inputChamfering and corner RMultiple repetitive cycleExpanded program editing
M06JCM06J/M08JItem
Internal illumination lightDoor interlockTurret-through coolantHydraulic cylinder unitStandard toolsPlate, leveling boltTransit clampsSpindle air purgeTouch switchLive tool rigid tapMain spindle C-axis (with brake)Main/Back spindle C-axis (with brake)Over-spindle coolant
M06SY/M08SYM06J/M08J M06D/M08D M06SD/M08SDItem○○○○○○○○○---
○
○○○○○○○○○○○-
○
○○○○○○○○○○-
○○
○○○○○○○○○○-
○○
Hydraulic chuck spec.Tool holderWork conveyorNC gantry loaderTool setterChip conveyor note1
Collet chuckLive center: MT No.4TailstockTurret-through coolant
Item
M06D/M08DM06SD/M08SDM06SY/M08SY
StandardStandardStandardStandardOption
StandardStandardStandardStandardStandardStandardStandardStandardStandard
Direct drawing dimension inputInch/metric conversionCanned cycle for drillingRigid tappingAbnormal load detectionManual handle retraceVariable-lead thread cutting Thread cutting cycle retract Cylindrical interpolation Polar coordinate interpolation Helical interpolationTURN MATE iMANUAL GUIDE i
M06JCM06J/M08JItem
M06D/M08DM06SD/M08SDM06SY/M08SY
StandardStandardStandardStandardStandard
StandardStandard
Option
StandardStandardOption
OptionOption
12 13
NC unit
NC unitControllable axesLeast input incrementMaximum commandable valueInterpolation methodCutting feed rateFeed rate overrideDwell
Absolute/incremental command
Tool offset valueTool offset pairsLCD/MDIDisplay languagePart program storage sizeNo. of registerable programsMiscellaneous functionSpindle functionTool function
FANUC 0iMate-TD FANUC 0i-TDX, Z X, Z, CM X, Z, CM, CB, A X, Y, Z, CM, CB, A
0.001 mm (Diameter value of X axis)± 8 digits
Linear/circular1 to 6,000 mm/min
0 to 150 %, 10 % stepG04, 0 to 99999.999
± 6 digits64 pairs
8.4” color LCDEnglish
M4 digitsS4 digitsT4 digits
X, Z: AbsoluteU, W: Incremental
X, Y, Z, CM, CB, A: AbsoluteU, V, W, HM, HB: Incremental
X, Z, CM, CB, A: AbsoluteU, W, HM, HB: Incremental
X, Z, CM: AbsoluteU, W, HM: Incremental
512 KB (equivalent to tape length 1,280 m)
400
M06SY/M08SYM06JC/M06J/M08J M06D/M08D M06SD/M08SDItem
1 MB (equivalent to tape length 2,560 m)800
M06JCM06JC○○-
○ (Solid)○○○○○---
○
M06SY/M08SYM06J/M08J M06D/M08D M06SD/M08SD○○○○○○○○○-
M06JC○○○○○
○ (Rear discharge only)○--
○ (Max. 2 MPa)
○○○○○○○○○-
○○○○○○○---
○○○○○○○---
Packaged options (M06J/M08J)
PRECISION TSUGAMIPRECISION TSUGAMI
Selected options according to the machining system and shape of workpieces.
Packaged options (M06JC)
Selected options according to the machining system and shape of workpieces.
Chucker spec. Chucker spec.(Automation)
Bar spec.
FEDCBA
Flange shapeWorkpiece shape
Automation
2-axis NC loader
Work stocker (flange)
Work stocker (shaft)
Work catcher with conveyor
3-jaw hollow (Large ID) 6 inch (M06J)
3-jaw hollow (Large ID) 8 inch (M08J)
3-jaw solid 6 inch (M06J)
3-jaw solid 8 inch (M08J)
Collet chuck (M06J/M08J)
-
-
-
-
-
○
○
-
-
-
○
2
2
4
-
1
-
2
2
-
-
-
○
-
○
○
-
-
○
-
-
-
-
○
○
-
-
-
○
2
2
-
4
-
1
-
-
2
2
1
○
-
○
○
-
-
-
○
○
-
-
○
○
-
-
-
○
2
2
4
-
1
-
2
2
-
-
-
○
-
-
○
-
-
○
○
-
○
-
○
○
-
-
-
○
2
2
-
4
-
1
-
-
2
2
1
○
-
-
○
-
-
-
-
-
-
○
○
○
-
-
○
○
2
2
4
-
1
-
2
2
-
-
-
○
-
-
○
○
○
○
-
-
-
○
○
○
-
-
○
○
2
2
-
4
-
1
-
-
2
2
1
○
-
-
○
○
○
OD holder Ⅰ (Offset holder)
OD holder Ⅱ (End face holder)
ID holder (φ40)
ID holder (φ32)
Drilling sleeve (40) (MT No,2)
Drilling sleeve (32) (MT No,2)
Boring sleeve (φ40 x φ16)
Boring sleeve (φ40 x φ20)
Boring sleeve (φ32 x φ16)
Boring sleeve (φ32 x φ20)
Live center
Hinge type
Manual swiveling type
Spindle chuck
Tailstock
Chip conveyor
Tool setter
Foot switch
Signal indicator (triple)
Bar feeder interface
Work stopper
Tooling kit
Option
Shaft shape Flange shape Shaft shape Bar work
14 15
Packaged optionsChucker spec.(Automation)
Bar spec.
-
-
-
-
○
-
-
-
-
-
-
○
2
4
2
2
○
-
○
-
-
-
○
-
-
-
-
-
○
-
-
○
-
-
-
-
○
○
2
4
2
2
○
-
-
-
-
-
○
-
○
○
Chucker spec.
Automation
Chip conveyor
Tool setter
Foot switch
Automatic door
Through-turret coolant
Signal indicator (triple)
Automatic programming software (FANUC TURNMATE i)
Bar feeder interface
Work stopper
2-axis NC loader
Work stocker (flange)
Work catcher with conveyor
3-jaw hollow (Large ID) 6 inch
3-jaw solid 6 inch
Solid hydraulic cylinder (P1452S)
3-jaw hollow 6 inch (B-206)
3-jaw solid 6 inch (N-06)
Hydraulic cylinder (hollow P1452S)
Chuck adapter
Collet chuck (SAD50)
OD holder Ⅱ (end face holder)
ID holder (φ25)
Boring sleeve (φ25 x φ16)
Boring sleeve (φ25 x φ20)
Hinge type
Manual swiveling type
Automatic door (M-code command)
Both-hand start switch
Spindle chuck(Made in Taiwan, CHANDOX)
Spindle chuck(Made in Japan, KITAGAWA)
Main spindle chuck
Tooling kit
Option
Packaged options
○
○
-
-
○
-
-
-
-
-
-
○
2
4
2
2
○
-
-
-
-
-
○
-
-
-
Packaged options (M06SD/M08SD/M06SY/M08SY)
PRECISION TSUGAMIPRECISION TSUGAMI
Selected options according to the machining system and shape of workpieces.
Packaged options
Chucker spec. Chucker spec.(Automation)
Bar spec.
DCBA
Flange & Shaft shapeWorkpiece shape2-axis NC loader
Work stocker (flange)
Work stocker (shaft)
Front discharge
High-pressure pump (One filter type)*
Work catcher with conveyor
Double turning holder
Double drill holder (back offset)
Boring sleeve (φ40 x φ16)
Boring sleeve (φ40 x φ20)
Cut-off holder
Cross live tool
Front live tool
Back live tool
Hinge type
Manual swiveling type
3-jaw hollow 6 inch
3-jaw solid 6 inch
Collet chuck
Automation
Main Spindle chuck
Back spindle chuck
Chip conveyor
Tool setter
Foot switch
Signal indicator (triple)
Bar feeder interface
Work stopper
Tooling kitO
ption
Flange shape Shaft shape Bar work
3-jaw hollow (large ID) 6 inch(M06SD/M06SY)
3-jaw hollow (large ID) 8 inch(M08SD/M08SY)
3-jaw solid 6 inch(M06SD/M06SY)
3-jaw solid 8 inch(M08SD/M08SY)
Collet chuck(M06SD/M06SY)(M08SD/M08SY)
16 17
Packaged options (M06D/M08D)
Chucker spec.(Automation)
Option
Selected options according to the machining system and shape of workpieces.
Chucker spec. Bar spec.
FEDCBA
Flange shapeWorkpiece shape
Tailstock
2-axis NC loader
Work stocker (flange)
Work stocker (shaft)
Work catcher with conveyor
3-jaw hollow (large ID) 6 inch (M06D)
3-jaw hollow (large ID) 8 inch (M08D)
3-jaw solid 6 inch (M06D)
3-jaw solid 8 inch (M08D)
Collet chuck (M06D/M08D)
-
-
-
-
-
○
○
-
-
-
○
4
4
2
2
-
2
2
-
○
-
○
○
-
-
○
-
-
-
-
○
○
-
-
-
○
4
4
2
2
-
2
2
1
○
-
○
○
-
-
-
○
○
-
-
○
○
-
-
-
○
4
4
2
2
-
2
2
-
○
-
-
○
-
-
○
○
-
○
-
○
○
-
-
-
○
4
4
2
2
-
2
2
1
○
-
-
○
-
-
-
-
-
-
○
○
○
-
-
○
○
3
4
2
2
1
2
2
-
○
-
-
○
○
○
○
-
-
-
○
○
○
-
-
○
○
3
4
2
2
1
2
2
1
○
-
-
○
○
○
Turning holder
Double drill holder
Boring sleeve (φ40 x φ16)
Boring sleeve (φ40 x φ20)
Cut-off holder
Cross live tool
Front live tool
Live center
Hinge type
Manual swiveling type
Automation
Spindle chuck
Chip conveyor
Tool setter
Foot switch
Signal indicator (triple)
Bar feeder interface
Work stopper
Tooling kit
Shaft shape Flange shape Shaft shape Bar work
Packaged options
○
-
○
-
-
-
-
-
-
○
○
○
-
-
-
-
-
-
○
○
-
-
-
-
○
○
-
-
-
○
-
-
○
4
4
2
2
-
2
2
-
○
-
○
○
-
-
○
○
-
-
-
○
○
-
-
-
○
○
-
-
○
○
-
-
○
4
4
2
2
-
2
2
-
○
-
-
○
-
-
○
-
-
○
4
4
2
2
-
2
2
-
○
-
-
○
-
-
-
-
○
○
3
4
2
2
1
2
2
-
○
-
-
○
○
○*Please determine the number of filters of the high-pressure pump at the time of order.
131
29
160
(X St
roke)
110
50
330(Z Stroke)
73
39 (8 inch)29 (6 inch)
10342
427 100
240Manual stroke
57 (8 inch)67 (6 inch)
100
60
6 150
17090
Max75
φ63
Max. machining dia.M08J:φ280M06J:φ260
110
150
6030
0
φ255327098
3295-H020 (Drill holder: φ32)
39 (8 inch)29 (6 inch)
10342
100
240 Manual stroke
57 (8 inch)67 (6 inch)
10073
131
105
55
330(Z Stroke)
29
160
(X St
roke)
427
3035
7 150
170
φ63
150
6530
010
5
Max. machining dia.M08J:φ280M06J:φ260
φ260
65
3295-H040 (Offset holder)
131
29
160
(X St
roke)
125
35
170
330(Z Stroke)
7
73
100 240 Manual stroke
57 (8 inch)67 (6 inch)
φ63
100427
150
42 103 39 (8 inch)29 (6 inch)
45
Max. machining dia.M08J:φ280M06J:φ260
125
150
4530
0
φ240
Direct mounting onto the turret end face
62
100427
42 103 39 (8 inch)29 (6 inch)
108
52
160
(X St
roke)
330(Z Stroke)
100 240 Manual stroke
57 (8 inch)67 (6 inch)
766 2923
170
150
557
φ63
630
150
6230
010
8
Max. machining dia.M08J:φ280M06J:φ260
φ255
3295-H030 (End face holder)
131
29
160
(X St
roke)
140
20
330(Z Stroke)
73
39 (8 inch)29 (6 inch)
10342
427 100
240 Manual stroke
57 (8 inch)67 (6 inch)
100
30
6 150
170
60
Max75
φ63
Max. machining dia.M08J:φ280M06J:φ260
φ225
150
30
140
300
86
3295-H010 (Drill holder: φ40)
125
30
5
15
130
230Z Stroke
180
2
40
30
φ440
15
130
X Stroke
20
125
125
50
20
φ25
30 φ25
45
54
Spindle end
Max. drill protruded length 40 mm
φ165
φ230
(Option)
479
239
21
304
110
Max78
72
75
91 (8 inch)81 (6 inch)
309 (8 inch)319 (6 inch)
122
175
65
50
100523
39 (8 inch)29 (6 inch)
260
(X S
troke
)
400(Z Stroke)
133
(87.5)
φ63
220(Manual stroke)
100
57 (8 inch)67 (6 inch)
144
116
267
3295-Y171 (End face live tool (front))
479
174
86
304
60Ma
x70
175
130
50350
100523
φ42
31 (8 inch)41 (6 inch)
260
(X S
troke
)
400(Z Stroke)
39 (8 inch)29 (6 inch)
(87.5)
φ63
220(Manual stroke)
100
57 (8 inch)67 (6 inch)
21 6543
139
94
164
271
27
3295-Y161 (Cross live tool)
175
90
214
46
479
50
100523
31 (8 inch)41 (6 inch)
260
(X S
troke
)
138
400(Z Stroke)
114
39 (8 inch)29 (6 inch)
Max200 56
6344
304
90
(87.5)
φ63
220(Manual stroke)
100
57 (8 inch)67 (6 inch)
122
286
3295-H290 (Front drill holder: φ40 (Front offset))
479
304
203
57
523
175
101
100
127
400(Z Stroke)
114
260
(X S
troke
)
39 (8 inch)29 (6 inch)
54
Max200 56
6 5034431 (8 inch)41 (6 inch)
47
100 220(Manual stroke)
(87.5)
φ63
57 (8 inch)67 (6 inch)
286
133
3295-H270 (Double drill holder: φ40 (Front offset))
100
175
479
174
400(Z Stroke)
220(Manual stroke)
100
85Max45
267
285
304
φ63
39 (8 inch)29 (6 inch)
523
52 (8 inch)42 (6 inch)
348 (8 inch)358 (6 inch)
57 (8 inch)67 (6 inch)
260
(X S
troke
)86
40 75
160
3466
3295-H260 (Turning holder)
100
175
130
479
39 (8 inch)29 (6 inch)
124
400(Z Stroke)
260
(X S
troke
)
3550
35
2 35
346 (8 inch)356 (6 inch)
2
174
86
Max45
304
523
205
100 220(Manual stroke)
(87.5)
φ63
57 (8 inch)67 (6 inch)
55
276
3295-H250 (Cut-off holder)
112Max145
479
39 (8 inch)29 (6 inch)
9890
400(Z Stroke)
114
260
(X S
troke
)
100
175
214
46
523
6375 (8 inch)385 (6 inch)
25 (8 inch)15 (6 inch)
304
117
220(Manual stroke)
100
φ63
57 (8 inch)67 (6 inch)
(87.5)
162
3295-H230 (Front drill holder: φ40)
PRECISION TSUGAMIPRECISION TSUGAMI
18 19
Tooling zone JC
100
35346 (8 inch)
523100523
6375 (8 inch)385 (6 inch)
25 (8 inch)15 (6 inch)
Tooling zone D
100427
42 103 39 (8 inch)29 (6 inch)
100427
42 103 39 (8 inch)29 (6 inch)
Max. drill protruded length 40 mm
Tooling zone J
479
219
41
10
523
210
506(A Stroke)
11 (8 inch)21 (6 inch)
175
85
100
764
7629517 (8 inch)527 (6 inch)
224
26
400(Z Stroke)
12466
260
(X S
troke
)
39 (8 inch)29 (6 inch)
113 (8 inch)123 (6 inch)
Max4082115
268
304
129
4
3295-Y301 (End face live tool (back)
506(A Stroke)
11 (8 inch)21 (6 inch)
94 (8 inch)104 (6 inch)
287
115 Max5963
129
764
7629517 (8 inch)527 (6 inch)
260
(X S
troke
)41
304
1022
426
85
219
400(Z Stroke)
210 12466
39 (8 inch)29 (6 inch)
479
523
175
100
23
3295-Y1651 (End face live tool (back)
479
239
21
304
110
175
65
5072
122
100523
75Max78
260
(X S
troke
)
224
26
400(Z Stroke)
210
91 (8 inch)81 (6 inch)
309 (8 inch)319 (6 inch)
12466
764
7629517 (8 inch)527 (6 inch)
11 (8 inch)21 (6 inch)
506(A Stroke)
39 (8 inch)29 (6 inch)
10
208
3295-Y171 (End face live tool (front))
479
174
86
304
60Ma
x70
1017
513
0
50350
100523
φ42
506(A Stroke)
11 (8 inch)21 (6 inch)
31 (8 inch)41 (6 inch)
764
7629517 (8 inch)527 (6 inch)
39 (8 inch)29 (6 inch)
260
(X S
troke
)
224
26
400(Z Stroke)
1246618921
164
86
3295-Y161 (Cross live tool)
175
90
304
214
46
10
479
50
100523
764
7629517 (8 inch)527 (6 inch)
11 (8 inch)21 (6 inch)
31 (8 inch)41 (6 inch)
506(A Stroke)
260
(X S
troke
)
224
26
400(Z Stroke)
210 12466
39 (8 inch)29 (6 inch)
90
56 Max120
6344
86
3295-H300 (Back drill holder: φ40 (back offset))
175
90
304
90
214
46
10
479
506344
100523
56Max200
764
7629517 (8 inch)527 (6 inch)
11 (8 inch)21 (6 inch)
31 (8 inch)41 (6 inch)
506(A Stroke)
260
(X S
troke
)
224
26
400(Z Stroke)
210 12466
39 (8 inch)29 (6 inch)
86
3295-H290 (Front drill holder: φ40 (front offset))
479
203
57
10
523
31 (8 inch)41 (6 inch)
175
101
100
764
7629517 (8 inch)527 (6 inch)
11 (8 inch)21 (6 inch)
506(A Stroke)
39 (8 inch)29 (6 inch)
260
(X S
troke
)
224
26
400(Z Stroke)
210 12466
Max145 56
6 50344
304
54
*
Max120
47
86
3295-H280 (Double drill holder: φ40 (back offset))*No back tools on the inner side tool position
479
304
203
57
10
523
634431 (8 inch)41 (6 inch)
50
175
101
100
56 Max65
5447
*
Max200
764
7629517 (8 inch)527 (6 inch)
11 (8 inch)21 (6 inch)
506(A Stroke)
39 (8 inch)29 (6 inch)
260
(X S
troke
)
224
26
400(Z Stroke)
210 1246686
3295-H270 (Double drill holder: φ40 (front offset))*No back tools on the inner side tool position
2 35
346 (8 inch)356 (6 inch)
2
39 (8 inch)29 (6 inch)
517 (8 inch)527 (6 inch)
39 478 (8 inch)488 (6 inch)
523
764
7629
479
2
174
86
304
1026
224
400(Z Stroke)
210 12466
260
(X S
troke
)
130 35
50 Max45
100
35
175
171
3295-H250 (Cut-off holder)
112
479
764
7629517 (8 inch)527 (6 inch)
11 (8 inch)21 (6 inch)
506(A Stroke)
39 (8 inch)29 (6 inch)
224
90
400(Z Stroke)
124
260
(X S
troke
)
175
100
Max65
214
46
304
117
523
2016
66210
6
30
3295-H240 (Back drill holder: φ40)
66210
25 (8 inch)15 (6 inch)
479
214
46
16
117
523
6375 (8 inch)385 (6 inch)
764
7629517 (8 inch)527 (6 inch)
11 (8 inch)21 (6 inch)
506(A Stroke)
224
2090
400(Z Stroke)
124
260
(X S
troke
)
39 (8 inch)29 (6 inch)
100
175
112Max145
142
304
3295-H230 (Front drill holder: φ40)
260
(X S
troke
)
400(Z Stroke)
764
762939 (8 inch)29 (6 inch)
517 (8 inch)527 (6 inch)
506(A Stroke)
11 (8 inch)21 (6 inch)
124
2022
485
175
479
267
152 7
Max45
100
174
86
304
523
16
66210
348 (8 inch)358 (6 inch)
52 (8 inch)42 (6 inch)
169
3295-H210 (Double turning holder)
7629517 (8 inch)527 (6 inch)
11 (8 inch)21 (6 inch)
506(A Stroke)
764
39 (8 inch)29 (6 inch)
175
479
124
224
400(Z Stroke)
260
(X S
troke
)
101
100
47 128
Max145 112 Max65
304
523
54
203
57 2610
6375 (8 inch)385 (6 inch)
25 (8 inch)15 (6 inch)
66210
*
142
3295-H220 (Double drill holder: φ40)*No back tools on the inner side tool position
PRECISION TSUGAMIPRECISION TSUGAMI
20 21
267
100523
348 (8 inch)358 (6 inch)
52 (8 inch)42 (6 inch)
100523
6375 (8 inch)385 (6 inch)
25 (8 inch)15 (6 inch)
Tooling zone SD
5072
100523
91 (8 inch)81 (6 inch)
309 (8 inch)319 (6 inch)
5050
100523
31 (8 inch)41 (6 inch)
6344
Tooling zone SD
523
440
168.
5352
.47
1017
596
.47
100
764
7629517 (8 inch)527 (6 inch)
11 (8 inch)21 (6 inch)
23 (8 inch)13 (6 inch)
506(A Stroke)
221
(X S
troke
)
185
26
400(Z Stroke)
210 12466
39 (8 inch)29 (6 inch)
Max45以上
4377 (8 inch)387 (6 inch)
129.
526
5
152
30 30
96.47
221
(X S
troke
)
50 50
52.47
81.93
100
(Y Stroke)
φ610
175
140
3295-Y1201 (End face live tool (front) (double))
523
440
168.
5352
.47 1017
596
.47
100
764
7629517 (8 inch)527 (6 inch)
11 (8 inch)21 (6 inch)
89 (8 inch)99 (6 inch)
506(A Stroke)
221
(X S
troke
)
185
400(Z Stroke)
210 12466
39 (8 inch)29 (6 inch)
26
26512
9.5
Max60170
292 50
30 30
96.47
52.47
175
100(Y Stroke)
φ610
81.9322
1(X
Stro
ke)
50 50
28
3295-Y1661 (End face live tool (back) (double))
440
167
54
265
10
523
764
7629517 (8 inch)527 (6 inch)
11 (8 inch)21 (6 inch)
40.23 (8 inch)30.23 (6 inch)
506(A Stroke)
221
(X S
troke
)
185
2698
400(Z Stroke)
210 12466
71.2226.78
39 (8 inch)29 (6 inch)
Max3
0
175
100
333 (8 inch)343 (6 inch)
50 50
5480
.4
100(Y Stroke)
175
φ610
9822
1(X
Stro
ke)
25 25
157.22
3295-Y1191 (Cross double live tool)
440
180
41
265
129
10
523
268
175
85
100
764
7629517 (8 inch)527 (6 inch)
11 (8 inch)21 (6 inch)
113 (8 inch)123 (6 inch)
506(A Stroke)
39 (8 inch)29 (6 inch)
221
(X S
troke
)
185
26
400(Z Stroke)
210 12466
115 Max4082
8522
1(X
Stro
ke)
50 50
100(Y Stroke)
4193
.4
175
φ610
4
3295-Y301 (End face live tool (back)
8522
1(X
Stro
ke)
50 50
100
(Y Stroke)
175
φ610
4193
.4
506(A Stroke)
11 (8 inch)21 (6 inch)
94 (8 inch)104 (6 inch)
287
115 Max5963
129
764
7629517 (8 inch)527 (6 inch)
221
(X S
troke
)41
265
1018
526
85
180
400(Z Stroke)
210 12466
39 (8 inch)29 (6 inch)
440
523
175
100
23
3295-Y1651 (End face live tool (back)
440
200
21
265
110
1017
565
5072
122
100523
75
6522
1(X
Stro
ke)
50 50
100
(Y Stroke)
2111
3.4
175
φ610Max78
221
(X S
troke
)
185
26
400(Z Stroke)
210
91 (8 inch)81 (6 inch)
309 (8 inch)319 (6 inch)
12466
764
7629517 (8 inch)527 (6 inch)
11 (8 inch)21 (6 inch)
506(A Stroke)
39 (8 inch)29 (6 inch)
208
3295-Y171 (End face live tool (front))
175
130 60
Max7
0
10
50350
100523
φ42
60
506(A Stroke)
11 (8 inch)21 (6 inch)
31 (8 inch)41 (6 inch)
764
7629517 (8 inch)527 (6 inch)
39 (8 inch)29 (6 inch)
175
φ610
1611
8.4
100
(Y Stroke)
50 50
221
(X S
troke
)
221
(X S
troke
)
185
26
400(Z Stroke)
1246618921
86
125
3295-Y161 (Cross live tool)
175
90
265
175
46
10
440
506
100523
56 Max120
90
764
7629517 (8 inch)527 (6 inch)
11 (8 inch)21 (6 inch)
31 (8 inch)41 (6 inch)
506(A Stroke)
221
(X S
troke
)
185
26
400(Z Stroke)
210 12466
39 (8 inch)29 (6 inch)
86
3295-H300 (Back drill holder: φ40 (back offset))
175
90
265
90
175
46
10
440
506344
100523
56Max200
764
7629517 (8 inch)527 (6 inch)
11 (8 inch)21 (6 inch)
31 (8 inch)41 (6 inch)
506(A Stroke)
221
(X S
troke
)
185
26
400(Z Stroke)
210 12466
39 (8 inch)29 (6 inch)
86
3295-H290 (Front drill holder: φ40 (front offset))
440
164
57
265
1017
510
1 54
50
100523
6344
Max145 56 Max120
*
764
7629517 (8 inch)527 (6 inch)
11 (8 inch)21 (6 inch)
31 (8 inch)41 (6 inch)
506(A Stroke)
221
(X S
troke
)
185
26
400(Z Stroke)
210 12466
39 (8 inch)29 (6 inch)
86
3295-H280 (Double drill holder: φ40 (back offset))*No back tools on the inner side tool position
440
265
164
57
10
523
634431 (8 inch)41 (6 inch)
50
175
101
100
56 Max65
5447
*
Max200
764
7629 517 (8 inch)527 (6 inch)
11 (8 inch)21 (6 inch)
506(A Stroke)
39 (8 inch)29 (6 inch)
221
(X S
troke
)
185
26
400(Z Stroke)
210 1246686
3295-H270 (Double drill holder: φ40 (front offset))*No back tools on the inner side tool position
2 35
346 (8 inch)356 (6 inch)
2
39 (8 inch)29 (6 inch)
517 (8 inch)527 (6 inch)
39 478 (8 inch)488 (6 inch)
523
764
7629
440
2
135
86
265
10 2
618
5
400(Z Stroke)
210 12466
221
(X S
troke
)
130 3
550
Max45
100
35
175
171
3295-H250 (Cut-off holder)
440
175
46
265
117
16
523
764
7629517 (8 inch)527 (6 inch)
11 (8 inch)21 (6 inch)
506(A Stroke)
185
2090
400(Z Stroke)
210 12466
221
(X S
troke
)
39 (8 inch)29 (6 inch)
112
6
Max65
100
175
30
3295-H240 (Back drill holder: φ40)
66210
25 (8 inch)15 (6 inch)
440
175
46
16
117
523
6375 (8 inch)385 (6 inch)
764
7629517 (8 inch)527 (6 inch)
11 (8 inch)21 (6 inch)
506(A Stroke)
185
2090
400(Z Stroke)
124
221
(X S
troke
)
39 (8 inch)29 (6 inch)
100
175
112Max145
142
265
3295-H230 (Front drill holder: φ40)
523
764
7629517 (8 inch)527 (6 inch)
11 (8 inch)21 (6 inch)
348 (8 inch)358 (6 inch)
169
52 (8 inch)42 (6 inch)
506(A Stroke)
100
267
152 7
8517
5
440
135
86
265
16
Max45
20
185
400(Z Stroke)
210 12466
221
(X S
troke
)
39 (8 inch)29 (6 inch)
3295-H210 (Double turning holder)
506(A Stroke)
11 (8 inch)21 (6 inch)
375 (8 inch)385 (6 inch)
25 (8 inch)15 (6 inch)
210142
185
2610
101
265
164
57
400(Z Stroke)
12466
221
(X S
troke
)
764
7629517 (8 inch)527 (6 inch)
440
523
6
39 (8 inch)29 (6 inch)
175
100
Max145 112 Max65
47 128
*
3295-H220 (Double drill holder: φ40)*No back tools on the inner side tool position
PRECISION TSUGAMIPRECISION TSUGAMI
22 23
523
348 (8 inch)52 (8 inch)
100
267 375 (8 inch)385 (6 inch)
25 (8 inch)15 (6 inch)
523
6
100
Tooling zone SY
5072
100523
91 (8 inch) 309 (8 inch)506
100523
31 (8 inch)
Tooling zone SY