C D C 1

APPLICATION FOR COMPLYING DEVELOPMENT CERTIFICATE

PART 1 – APPLICANT As the applicant, I / we hereby appoint Tony Truong from KUDOS BUILDING CERTIFICATION as the Principal Certifying Authority (PCA) for the building work identified in Part 3 of this application form.

Name: XXXX

XXXX

Note: The applicant must be the property owner or a person authorized by the owner to lodge the CDC application. A building contractor cannot be the applicant unless they are the owner of the property.

Company: XXXX

Address: XXXX

XXXX

Contact details: Mobile: XXXX Signature:

Email: XXXX Date: XXXX

PART 2 – OWNER CONSENT As owner of the land to which this application relates to I consent to this application. I also consent for KUDOS BUILDING CERTIFICATION staff to enter the land to carry out inspections relating to this application.

Name: XXXX

XXXX 

Note: Where the works are being carried out in strata titled building the consent of the Body Corporate must be provided.

Note: If the owner is a company, an authorised director must sign the form. Company:

Address: XXXX

XXXX

Contact details: Mobile: XXXX Signature: Insert Seal of Body Corporate here if applicable Email: XXXX

Date: XXXX

PART 3 – DESCRIPTION OF DEVELOPMENT Detailed description is required for the proposed works.

Description of development:

XXXX

XXXX

Address of development:

Building name: XXXX

Shop number: XXXX Shop name: XXXX

Lot & DP: Lot XXXX & DP XXXX

Address: XXXX

Miscellaneous: Cost of works (incl. GST): $XXXX.00 Classification(s): XXXX

C D C 2

PART 4 – ENVIRONMENTAL PLANNING INSTRUMENT

The name of the Environmental Planning Instrument (EPI) under which the development is complying development.

SEPP: State Environment Planning Policy (Exempt & Complying Development Codes) 2008

State Environment Planning Policy (Affordable Housing) 2009

PART 5 – NOTICE OF COMMENCEMENT OF BUILDING WORK A Notice of commencement under Section 81A of the Environmental Planning and Assessment Act 1979

Date work is to commence:

XXXX NOTE: The person having benefit of the Part 4a Certificate shall give at least 2 working day(s) notice of intention to commencement of works.

PART 6 – PRINCIPLE CONTRACTOR

Name: XXXX NOTE: Without the Principle Contractor’s details we will not accept the application form

Company: XXXX

Address: XXXX

XXXX

Contact details: XXXX

PART 7– DOCUMENTS TO ACCOMPANY APPLICATION FOR CDC

The following documentation is submitted with the CDC application

Copies of plans, elevations and sections. List of any existing and proposed fire safety measures.

Copies of specifications. Evidence that Long Service Levy has been paid.

Owner’s consent. Applicant’s signature.

ABS schedule is completed. Evidence of Home Building Act requirements satisfied.

PART 8 – PROPOSED FIRE SAFETY SCHEDULE

Fire Safety Measures Standard of Performance

Access panels, doors and hoppers to fire resisting shaft BCA C3.13 & AS1905.1-2005, AS1905.2-2005

Automatic fail safe devices BCA D2.21

Automatic fire detection and alarm system BCA E2.2, Spec E2.2a & AS1670.1-2004, AS3786-1993

Automatic fire suppression system BCA E1.5, Spec E1.5 & AS2118.1-1999

Automatic fire suppression system (Residential) BCA E1.5, Spec E1.5 & AS2118.4-1995

Emergency lighting BCA E4.2, E4.4 & AS2293.1-2005

Emergency Lifts BCA E3.4 & AS1735.2-2001

Sound systems & intercom systems for emergency purposes

BCA E4.9 & AS1670.4-2004

Exit signs BCA E4.5, E4.6, E4.8 & AS2293.1-2005

C D C 3

Fire Safety Measures Standard of Performance

Exit signs (non-illuminated) BCA Clause E4.7

Fire blankets AS2444-2001

Fire control centres and rooms BCA E1.8 & Spec E1.8

Fire dampers BCA C3.12, C3.15 & AS/NZS1668.1-1998, AS1668.2-1991

Fire doors BCA Spec C3.4 & AS1905.1-2005

Fire hydrant systems BCA E1.3 & AS2419.1-2005

Fire seals protecting openings in fire resisting components of the building

BCA C3.12, C3.15 & Spec C3.15

Fire shutters BCA C3.4 & Spec C3.4

Fire windows BCA Spec C3.4

Hose reel system BCA E1.4 & AS2441-2005

Lightweight construction BCA C1.8 & Spec C1.8

Mechanical air handling system BCA E2.2, Spec E2.2b & AS/NZS1668.1-1998

Perimeter vehicular access BCA Clause C2.4

Portable fire extinguishers BCA E1.6 & AS2444-2004

Pressurising system BCA Clause E2.2 & AS/NZS1668.1-1998

Required automatic exit doors BCA C3.4, C3.7 & C3.8

Smoke detectors and heat detectors BCA E2.2, Spec E2.2a & AS3786-1993

Smoke & heat vents BCA E2.2 & Spec E2.2c

Smoke exhaust system BCA E2.2, Spec E2.2b & AS/NZS1668.1-1998

Smoke dampers BCA E2.2

Smoke doors BCA Spec C3.4

Solid-core doors BCA C3.11

Standby power systems BCA Spec G3.8

Wall wetting sprinkler and drencher systems BCA C3.4

Warning and operational signs EPA Regulation (reg 183)

BCA E3.3 (lifts)

BCA C3.6 sliding doors

BCA H108 stage load notice

BCA D2.19 (e) (iii) Notices on doors in sight of audience

BCA D2.23 Signs on exit doors

Zone smoke control system BCA E2.2 & AS/NZS1668.1-1998

C D C 4

FIRE SAFETY MEASURES STANDARD OF PERFORMANCE

Fire blankets AS2444-2001

Fire control centres and rooms BCA E1.8 & Spec E1.8

PART 9 – AUSTRALIAN BUREAU OF STATISTICS SCHEDULE Only required to be completed with Class 1a dwelling only.

All new buildings

Gross site areas (m2)

Gross floor area (m2) of new building

Number of storeys (including underground floors)

Residential buildings only

Number of dwellings to be constructed

Number of pre-existing dwellings on site

Numbers of dwellings to be demolished

Will the new dwellings(s) be attached to other new building?

Will the new building(s) be attached to existing dwellings?

Does the site contain a dual occupancy?

Materials – Residential buildings

Walls □ Brick (double)(11) □ Brick (veneer)(12) □ Concrete or store (20)

□ Fibre cement (30) □ Timber glass (40) □ Timber glass (50) □ Steel (60) □ Aluminium (70) □ Other (80) □ Not specified (90)

Roof □ Tiles (10) □ Concrete or slate (20) □ Fibre cement (30) □ Steel (60) □ Aluminium (70) □ Other (80) □ Not specified (90)

Frame □ Timber (40) □ Steel (60) □ Aluminium (70) □ Other (80) □ Not specified (90)

Floor □ Concrete or slate (20) □ Timber (40) □ Other (80) □ Not specified (90)

PART 10 – NOTES FOR COMPLETING APPLICATION FOR A COMPLYING DEVELOPMENT

1. A description of the land to be developed can be given in the form of a map which contains details of the lot number, DP/MPS, vol/fol etc.

2. A plan of the land must indicate: a. location, boundary dimensions, site area and north point of the land b. existing vegetation and trees on the land c. location and uses of existing buildings on the land d. existing levels of the land in relation to buildings and roads e. location and uses of buildings on sites adjoining the land

3. Plans or drawings describing the proposed development must indicate (where relevant):

a. the location of proposed new buildings or works (including extensions or additions to existing buildings or works) in relation to the land’s boundaries and adjoining development

b. floor plans of proposed buildings showing layout, partitioning, room sizes and intended uses of each part of the building elevations and sections showing proposed external finishes and heights

c. proposed finished levels of the land in relation to buildings and roads d. building perspectives, where necessary to illustrate the proposed building e. proposed parking arrangements, entry and exit points for vehicles, and provision for movement of vehicles within

the site (including dimensions where appropriate)

C D C 5

f. proposed landscaping and treatment of the land (indicating plant types and their height and maturity) g. proposed methods of draining the land.

4. The following information must also accompany a Complying Development Certificate application for building work and

change of building use: Building Work - In the case of an application for a Complying Development Certificate for building work:

a. copies of compliance certificates relied upon b. four (4) copies of detailed plans and specifications c. The plan for the building must be drawn to a suitable scale and consist of a general plan and a block plan. The

general plan of the building is to: show a plan of each floor section show a plan of each elevation of the building show the levels of the lowest floor and of any yard or unbuilt on area belonging to that floor and the levels of the

adjacent ground indicate the height, design, construction and provision for fire safety and fire resistance (if any).

Where the proposed building work involves any alteration or addition to, or rebuilding or, an existing building the general plan is to be coloured or otherwise marked to the satisfaction of the certifying authority to adequately distinguish the proposed alteration, addition or rebuilding. Where the proposed building work involves a modification to previously approved plans and specifications the general plans must be coloured or otherwise marked to the satisfaction of the certifying authority to adequately distinguish the modification. The specification is: a. to describe the construction and materials of which the building is to be built and the method of drainage, sewerage

and water supply b. state whether the materials proposed to be used are new or second hand and give particulars of any second hand

materials used c. where the application involves an alternative solution to meet the performance requirements of the BCA, the

application must also be accompanied by: details of the performance requirements that the alternative solution is intended to meet, and details of the assessment methods used to establish compliance with those performance requirements

d. if relevant, evidence of any accredited component, process or design sought to be relied upon

NB if an EPI provides that complying development must comply with the deemed to satisfy provisions of the BCA a CDC cannot authorise compliance with alternative solutions to the performance requirements corresponding to those deemed-to-satisfy provisions

e. except in the case of a class 1a or class 10 building: f. a list of any fire safety measures that are proposed to be implemented in the building or on the land on which the

building is situated, and g. if the application relates to a proposal to carry out any alteration or rebuilding of, or addition to, an existing building,

a separate list of such of those measures as are currently implemented in the building or on the land on which the building is situated.

h. The list must describe the extent, capability and basis of design of each of the measures concerned.

Change of Building Use - In the case of an application for a Complying Development Certificate for a change of building use (except for an application that, if granted, would authorise the building concerned being used as a class 1a or class 10 building): a list of any fire safety measures that are proposed to be implemented in the building or on the land on which the

building is situated in connection with the proposed change of building use. a separate list of such of those measures as are currently implemented in the building or on the land on which the

building is situated. The list must describe the extent, capability and basis of design of each of those measures concerned.

PART 11 – NOTES FOR COMPLETING APPLICATION FOR A COMPLYING DEVELOPMENT

Is any long service payment levy payable under s.34 of the Building and Construction Industry Long Service Payments Act 1986?

Does the application involve a BASIX affected development, or a BASIX optional development for which a BASIX certificate has been obtained?