approved bidder's specification for innovation

Administration Office, 531 Jones Avenue, Braddock, PA 15104-2418 • 412-731-1300

APPROVED BIDDER'S SPECIFICATION

FOR

INNOVATION, FABRICATION DIGITAL MEDIA EQUIPMENT

2021-2022 SCHOOL TERM

WE AGREE TO FURNISH THE ITEMS THAT WE HAVE PRICED ON THE ATTACHED SHEETS

ACCORDING TO ALL THE CONDITIONS SET FORTH HEREIN.

NAME OF BIDDER ___________________________________________________________

ADDRESS ____________________________________________________________________

_____________________________________________________________________

TELEPHONE NUMBER __________________________

GRAND TOTAL OF ALL ITEM(S) BID $___________________

______________________________________________________________________________

SIGNATURE OF BIDDER OR AUTHORIZED REPRESENTATIVE

____________________________________

DATE OF BID

______________________________________________________________________________

NAME OF COMPANY PROVIDING BID BOND

APPROVED BIDDER'S SPECIFICATION

FOR



1. The Woodland Hills School District will receive sealed bid proposals for “INNOVATION,

FABRICATION DIGITAL MEDIA EQUIPMENT” as specified on the attached bidder's blank.

2. Specifications and lists should be printed in duplicate. Please submit one completed copy with bid bond

to the Woodland Hills School District and retain the duplicate for your records.

3. Item(s) must be bid as specified. If offering an “equal” product, it is the responsibility of the bidder to

provide a sample or detailed information to justify the quality, performance, etc., of the substitute. The

description of the substitute item must be recorded next to the item description. Unsupported substitutes

will not be considered.

4. The various materials and products specified in the specifications by name or description are given to

establish a standard of quality and of cost for bid purposes. It is not an attempt to limit the acceptance to

any one material or product specified, but rather to name or describe it as the absolute minimum

standard that is desired and acceptable. A material or product of lesser quality would not be acceptable.

Where proprietary names are used, whether or not followed by the words “or an approved equal”, they

shall be subject to equals only as approved by the Business Manager.

5. Prices must be inserted in the price columns of the bid sheets. Should total figures be incorrect, the unit

cost will govern. The Unit Cost given must be for the unit specified in the “UNIT” Column. Shipping

and handling is the responsibility of the successful bidder.

6. Change or alteration of the bid document is not permitted.

7. A grand total is to be given on the cover sheet. This total should include all charges, including shipping

and handling to the designated building.

8. The bidder or his authorized representative must sign all bids submitted.

9. The bidder must file a bid bond by corporate surety or insurance company payable to the Woodland

Hills School District in an amount equal to ten percent (10%) of the total contract price. In lieu of a bid

bond, we will only accept a certified bank check. Checks and bonds will be promptly returned to

unsuccessful bidders. The Board will retain checks and bonds for the successful bidders until a purchase

order is issued. Personal or company checks will not fulfill this requirement.

10. All bidders must comply with the "RIGHT TO KNOW ACT" pertaining to hazardous items.

11. The successful bidder must deliver all items or services to the delivery address on the purchase order.

THERE WILL BE NO EXCEPTIONS AND NO MINIMUM ORDER REQUIREMENTS.

12. A separate invoice should be prepared for each purchase order.

All bids awarded are done so with the understanding that invoices rendered must be approved for

payment by the Woodland Hills Board of Education. Such approval for payment is granted during the

Board's regular monthly meeting, following delivery to and verification by the employee making the

request. INVOICES RECEIVED BEFORE DELIVERY WILL NOT BE PROCESSED FOR

PAYMENT. Payment terms are net sixty (60) days from date of invoice or delivery whichever is later.

13. Should the successful bidder neglect or refuse to furnish and deliver the items or any part thereof as

provided in the specifications, the Board is authorized and empowered to purchase articles in conformity

with this bid from such party or parties as it shall select at the expense of the successful bidder, or to

cancel this bid reserving to itself nevertheless, all rights for damages which may be incurred by the

Board.

14. The Woodland Hills School District Board of Education reserves the right to (1) reject any and all bids,

(2) to select a single item or group of items from any bid, and (3) to waive any technicalities or

informalities in any bid.

15. Sealed bids must be in the possession of the Assistant Business Manager, Ms. Valerie Shaver, no later

than 10:00 a.m. on Wednesday September 8, 2021.

16. Bids will be opened at 10:00 a.m. on Wednesday September 8, 2021 in the Board Room located in the

Woodland Hills Administration Building, 531 Jones Avenue, Braddock, PA 15104-2418. Bidder may

be present for the opening.

17. Bids will be officially awarded at the regular legislative meeting of the Woodland Hills Board of

Education scheduled for Wednesday September 8, 2021 at 7:00 p.m. at the Woodland Hills Board

Room, 531 Jones Avenue, Braddock, PA 15104-2418.

18. Successful bidders will be issued purchase order(s) for item(s) awarded within thirty (30) days from

September 15, 2021, the date on which bids are to be awarded. Bid prices must be honored until the

order is completed.

19. Additional information regarding this bid should be directed to Mr. Paul Beard, Teacher, 2550

Greensburg Pike, Pittsburgh, PA 15221, (412) 244-1100 Ext. 5112.

20. All bids are to be clearly marked on the outside of the sealed envelope “INNOVATION,

FABRICATION DIGITAL MEDIA EQUIPMENT” and submitted to the following address:

WOODLAND HILLS SCHOOL DISTRICT

ATTN: Valerie Shaver, Assistant Business Manager

531 Jones Avenue

Braddock, PA 15104-2418

BY ORDER OF THE BOARD

Michael A. Gigliotti

Business Manager/ Board Secretary

WOODLAND HILLS SCHOOL DISTRICT

APPROVED BIDDER'S SHEET



QUANTITY UNIT DESCRIPTION UNIT

PRICE

TOTAL

PRICE

2 Each JET 708115K 14” BANDSAW

1 Each JET 708598K BELT & DISC SANDER

2 Each POWERMATIC 1791276 20” DISC SANDER

1 Each POWERMATIC 1791282 OSCILLATING EDGE

SANDER

1 Each POWERMATIC 1791316 20” PLANER

1 Each POWERMATIC 160086K 8” JOINTER

3 Each DEWALT DW788 SCROLL SAW

1 Each DEWALT DES780 MITER SAW

2 Each JET 716300 DRILL PRESS

9 Each SAFETY STARTERS

1 Each ICS53230 SAWSTOP TABLE SAW W/ MOBILE

BASE

3 Each BOFA PRINTPRO 3

2 Each TOP ENCLOSURE FOR ULTIMAKER S3

1 Each TOP ENCLOSURE FOR ULTIMAKER S5

1 Each ROLAND MDX-50 CNC MILLING MACHINE

1 Each CREAFORM ACADEMIA 20 SCANNER PACKAGE

WITH LAPTOP

1 Each ROLAND GS-24 VINYL CUTTER

10 Each OPEN SHELVING STORAGE UNIT

3 Each HAN107 INSTRUCTOR CHAIR

24 Each HAN001 STUDENT CHAIR

GRAND TOTAL

Innovation and Fabrication Labs Provide the below listed items in the quantities indicated. See attached cut sheets for product detail. All final Mechanical, Electrical and Plumbing connections to be done by the school district.

General Requirements

1. It is the prime intent of these specifications to show and define the essential minimumrequirements regarding the scope and quality of this laboratory system.

2. All bidders must be prepared to show the following proof of their ability to performunder this contract. Failure to meet any of the requirements and qualifications will besufficient cause for rejection of any or all bids.

a) Minimum of five (5) years experience in providing student directed curriculum.

b) Minimum of ten (10) completed installations of equal size and requirementswhich can be inspected prior to award of contract.

c) Financial and technical resources of sufficient scope to assure prompt andsatisfactory performance in the production and delivery of all equipment andworkstations specified.

3. The owner reserves the right to reject the bidder if, in his opinion, such bidder cannotmeet the requirements of these specifications, or has a past record of poor performance.

4. Bidder’s proposed curriculum, equipment and workstations may be inspected by theowner at the equipment manufacturer’s plant prior to shipment. Any products found notto be in accordance with these specifications may be rejected. All rejected products(curriculum, equipment or workstations) must be promptly replaced at no cost to theowner.

5. Bidder’s submitting “OR EQUAL” bids shall include descriptive and illustrativeliterature and samples of all curriculum materials covering the items proposed with thebid. When bidding “OR EQUAL”, bidder must indicate brand/model numbers for eachitem, as well as supporting comparative rationale.

6. Bidders submitting “ALTERNATE” bids shall include descriptive and illustrativeliterature for the products proposed including brand/model numbers for each item, as wellas supporting comparative rationale.

7. Responsible bidder to have on staff and be able to demonstrate capabilities, a proper in-house support staff and on-site technical support.

8. Each lab is to include delivery, installation and training. Responsible vendor will need tobe able to demonstrate the products running properly before final sign off by school.

1

Contact BOFA at https://bofainternational.com/us/contact/https://bofainternational.com/us/portal/datasheets/3d-printpro-3/

3D PrintPRO 33D PRINTINGLast Updated on 16.07.2018

For table top enclosed/partially enclosed 3D printer.

The BOFA 3D PrintPRO 3 incorporates externally mounted plenum system manifolds,which effectively captures fumes generated during the printing process and returns ultraclean, filtered air to the operator’s breathing zone.

The BOFA 3D PrintPRO 3 has the benefits of low cost, low power consumption andintegral speed control. Each filtration unit is supplied with connection hoses and ‘printyour own’ manifold instructions.

Print your own extendable manifolds 3D drawing files can be found at:bofainternational.com/us/print-your-own

Technology

HEPA filter Advanced carbonfilter (ACF)technology

Multi voltagesensing unit (MVS)

ProTECT serviceplan

SureCHECKquality standard

Key features of the 3D PrintPRO 3

Digital speed controlStandard

Filter change indicatorStandard

3 level filtration - Pre and HEPA/chemical filtersStandard

Hose kit includedStandard

Low noise levelStandard

Powder coated for durabilityStandard

Small footprintStandard

Compact sizeStandard

Compact sizeStandard

24V remote stop/ start interfaceOptional

3

Not Included

Qty 3 Bofa PrintPro 3

Technical specification

1. Filter / Change indicator 2. On / Off switch 3. Digital speed control 4. Power cable inlet

5. Hose inlet connections -50mm

6. Exhaust outlet - 50mm 7. Lid fastening latches 8. Feet

9. Optional base exhaustoutlet

Hose kit specification

1. 50mm cuff (x 2 Exhaust hose / x 2Return air hose)

2. 50mm x 1 m flexible hose (x 2) 3. 'Print your own' inlet/outlet manifolds (notsupplied with hose kit)

4

Not Included

Airflow through filters

Chemical filter

HEPA filter

Pre filter

Clean air

Contaminated air

Particulate

Replacement filter part numbers

Model Part number Combined HEPA/Gas filter

3D PrintPRO 3 A1030102 A1030099

Technical data

EU US

Dimensions (HxWxD) 410 x 290 x 310mm 16.14 x 11.42 x 12.21”

Cabinet construction Powder coated mild steel Powder coated mild steel

Airflow / pressure 150m3/hr 88cfm

Electrical data 230v 1ph 50/60Hz Full load current: 0.7amps

115v 60/50Hz Full load current: 1.3 amps

Noise level <57dBA (at typical operating speed) <57dBA (at typical operating speed)

Weight 11kgs 24.2lbs

Approvals CE CE

Pre filter specifications

Filter media Polypropylene, Acrylic

Filter media construction Pad

Filter efficiency 96% @ 2 microns

Combined HEPA / Gas filter specifications

HEPA filter media Glass fibre

HEPA media construction Maxi pleat construction with webbing spacers

5

Combined HEPA / Gas filter specifications

Gas filter Treated activated carbon

Filter housing Zintec mild steel

Filter efficiency 99.997% @ 0.3 microns

Datasheet correct at time of publishing. For specific applications, please contact us for details.

6

Top Enclosure for Ultimaker S3

Enclosure only, 3D printer not included

With an easy lift off design, you will be able to easily remove the top and work on yourprinter. Allows for better temperature regulation and significantly reduced VOCs.

7

Qty 2 Top Enclosure for Ultimaker S3

Top Enclosure for Ultimaker S5

Enclosure only, 3D printer not included

With an easy lift off design, you will be able to easily remove the top and work on yourprinter. Allows for better temperature regulation and significantly reduced VOCs.

8

Qty 1 Top Enclosure for Ultimaker S5

Simply AdvancedAutomated 3D milling right from your benchtop.

9

Qty 1 MDX-50 CNC Mill Package

Create Functional Prototypes With So Many Materials

The MDX-50 benchtop CNC mill combines precise, automated milling and unmatched ease-of-use. An ideal solution for short-runs and

so users of all abilities can mill on a wide range of materials.

Creat

The MDand un

so useso use

Automated Production

Operator-Friendly Controls

The MDX-50 features a 5-station Automatic Tool Changer with an auto-sensing function to detect tool length and ensure milling accuracy.

Almost all machine operations can be controlled from a built-in control panel without having to go back to a PC.

For monitoring machine status in busy classrooms and studios, current job status can be checked from a distance with multi color-coded LED status lights

The VPanel serves as a computer-based virtual controller with all of the functionality of a physical on-board control panel, as well as tool life management and e-mail alerts.

WoodsComposites

Prototyping Foam Mechanical Plasticsand Resins

10

and educational enviornments. A newly improved door ensures extra-safe operation while waste is contained in a built-in debris collection drawer.

ClickMill

SRP Player CAM

The MDX-50 requires no special electrical set-up and provides simple-to-load tools and automatic machine calibration.

Popular industry and education software, SRP Player CAM has been updated to match the advanced functions of the MDX-50.

operation very straightforward.

Other bundled software includes ClickMill software for surfacing,

Included Software for Experts and Beginners

With an advanced drive system, machine rigidity and enhanced drive mechanics, the MDX-50 mills incredibly smooth and accurate prototypes. A machining area of 15.8 (X) x 12 (Y) x 3.9 (Z) inches supports production of large single objects or batch production of smaller parts.

The MDX-50 requires no special electrical set-up and provides simple-to-load tools and automatic machine calibration.

Mill Fine Details and Smooth Finishes

3.9”

15.8”

12.0”

Safe, Clean and Convenient

11

visit www.rolanddga.com/mdx50.

Automatic Tool Changer

Status Light

Large Machining Area

Dust Collection Drawer

• 5-station Automatic Tool Changer

• Advance drive system supports dimensional stability when creating prototypes

• Large machining area (15.8 (X) x 12 (Y) x 3.9 (Z) in.)plus enhanced machine rigidity and drive mechanics

• Built-in control panel

• Virtual Control Panel (VPanel) – allows usersto make changes to milling parameters whilethe unit is still in operation

• User-friendly SRP Player CAM andClickMill software included

• Automatic set-up and operation with automatedmachine calibration and tool length detection

•system inform users of machine status

• Built-in debris collection drawer with rail guidedsafety door for safe and clean production

• Supports G-code NC programming language

• Internal LED light for workspace illumination

• Includes Roland’s industry-best service and support,plus a comprehensive one-year warranty

educational environments•

Get social with us.

RDGA-MDX50-02 January 2019 Roland DGA Corp. has licensed the MMP technology from the TPL Group.

FOR MORE INFORMATION OR TO FIND A DEALER NEAR YOU, CALL 800-542-2307 OR VISIT WWW.ROLANDDGA.COM/MDX50ROLAND DGA CORPORATION | 15363 BARRANCA PARKWAY | IRVINE, CALIFORNIA 92618-2216 | 800.542.2307 | 949.727.2100

12

Package Includes: (2) 1/4", (2) 1/8" shank tool holders. (1) Long reach & (1) Short reach tooling kit. (2) Rolls of double sided tape

TEACHINGINDUSTRY ADVANCEMENTS WAIT FOR NO ONE— NOT EVEN IN EDUCATION

THE ACADEMIA TEACHING PACKAGE INCLUDES

• ACADEMIA professional-grade 3D scanner

• 5-year ACADEMIA Customer Care Plan• Software suite with our reverse engineering and

inspection software modules• Self-training documentation on ACADEMIA 3D scanners

FEATURES YOUR TEACHING CURRICULUM CAN BENEFIT FROM

• Turnkey solution with all the necessary add-ons to enrich your syllabus• The industry’s most affordable professional-grade 3D scanner

dedicated to teaching applications•• Portable, fast, and easy-to-use 3D measurement solutions:

become an expert in no time!

ARE YOU READY TO TAKE YOUR TEACHING OR RESEARCH

TO A WHOLE NEW LEVEL?

Discover Creaform ACADEMIA™, a solution suite for forward-thinking teachers and researchers looking to inspire, collaborate, and push the innovation envelope

forward using the latest advancements in 3D measurement technologies.

With this educational program, Creaform goes beyond delivering didactic tools and provides a complete and collaborative skill-nurturing academic solution.

The suite lets you choose from our full line of 3D scanners and portable CMM, free application software, complimentary add-ons as well as useful tools tailored

to get you started with industrial 3D measurement solutions.

13

Qty 1 Creaform Academia 20 Scanner Package with Laptop

Package Includes Optional Laptop Zbook G6 17" 64Go - RTX5000 Laptop

FREE TEACHING KITSCOMPLEMENTARY DIDACTIC MATERIAL(1)

Ready-to-use material that is in line with today’s industry requirements, all of which covers three main themes:

FREE SOFTWARECREAFORM ACADEMIA SOFTWARE PACKAGE

our complementary 3D application software(2) suite provides the tools you need to tackle any type of

3D SCANNING

REVERSE ENGINEERING

INSPECTION

SCAN-TO-CAD SOFTWARE MODULEVXmodel™

3D MEASUREMENT SOFTWARE PLATFORM VXelements™

DIMENSIONAL INSPECTION SOFTWARE MODULEVXinspect|Elite™

Bring your classes to the next level with Creaform ACADEMIA• Customizable teaching presentations• Video tutorials and self learning documentation• Pre-built lab exercises with sample datasets

THE ULTIMATE STARTER KITFOR EASY INTEGRATIONINTO ENGINEERING CLASSES

Start gainingground with

Creaform ACADEMIA!

FREE 50-SEATSNETWORK LICENSE

50

14

is assessed with traceable length artefacts by measuring these at different locations and orientations within the working

TECHNICAL SPECIFICATIONSACADEMIA™

ACADEMIA 20™

PART SIZE RANGE (recommended)

ACCURACY (2)

VOLUMETRIC ACCURACY (4)

(based on working volume)

3 (320 ft3)

N/A3

3)

VOLUMETRIC ACCURACY(based on part size)

(5)

MEASUREMENT RESOLUTION

MESH RESOLUTION

SCANNING AREA

STAND-OFF DISTANCE

DEPTH OF FIELD 100 mm (4 in)

LIGHT SOURCE White light (LED)

LASER CLASS 24 bits

TEXTURE RESOLUTION 50 to 250 DPI

POSITIONING METHODS Geometry and/or targets and/or texture

MEASUREMENT RATE 550,000 measurements/s

WEIGHT

DIMENSIONS (LxWxH)

OPERATING TEMPERATURE RANGE

OPERATING HUMIDITY RANGE (non-condensing)

CERTIFICATIONS EC Compliance (Electromagnetic Compatibility Directive, Low Voltage Directive), compatible with rechargeable batteries (when applicable), IP50, WEEE

FEATURE COMPARISONACQUISITION MODULES (7) APPLICATION MODULES

VXscan™ / VXprobe™ / VXshot™ VXmodel™ VXinspect|Eli te™

MULTIPLE MEASUREMENT MODE

MESH EDITING

ALIGNMENT

GEOMETRIC ENTITIES

NURBS SURFACE

TRANSFER-TO-CAD SOFTWARE

CAD IMPORT

REPORTING

Authorized Distributor

Creaform ACADEMIA, ACADEMIA 10, ACADEMIA 20, ACADEMIA 50, Go!SCAN 3D, GoSCAN SPARK, HandyPROBE Next, HandySCAN 3D, HandySCAN BLACK|Elite, HandySCAN 307, MetraSCAN 3D, MetraSCAN BLACK|Elite, MetraSCAN 357, C-Track, VXelements, VXmodel, VXinspect, VXscan, VXprobe, VXshot and their respective logos are trademarks of Creaform Inc. © Creaform Inc. 2021. All rights reserved. V4

Creaform Inc.4700 rue de la PascalineLévis QC G6W 0L9 CanadaTel.: 1 418 833 4446 | Fax: 1 418 833 9588

[email protected] | creaform3d.com

Creaform U.S.A. Inc.2031 Main StreetIrvine CA 92614 USATel.: 1 855 939 4446 | Fax: 1 418 833 9588

15

WB255682

Extra Heavy Duty Shelving 36x24x72 With 5 Shelves Wood Deck

BOLTLESS SHELVING 5-Shelf -- Wood DeckFast Assembly -- Reconfigures without ToolsExpect top performance with rugged steel shelving that features super-strong roll-formed steel framing with positiveinterlocking beam-and-post connections for quick assembly. All shelf levels also include double-rivet support for addedrigidity. This unit includes shelf supports and 5/8" particleboard decking. Levels adjust at 1-1/2" increments and permit 4-way access. 14-gauge steel uprights measure 2-1/4" x 1-1/2". Durable gray baked enamel.

16

Qty 10 Open Shelving Storage Unit

708115K 14" Closed Stand Bandsaw

Product Features6" depth resaw capacity for cutting larger pieces of wood15" x 15" offset cast iron table gives you more work area in front of the bladeCast iron frame construction for strength and rigidity, reduced vibration4" dust port allows for direct connection of dust collection systemPrecision computer balanced wheels eliminate vibration for accurate blade trackingSingle knob tracking adjustment simplifies the blade tracking processMicro adjustable lower blade guide reduces set up time and makes adjustments easierGraphite impregnated polymer blade guides with roller bearing thrust guides provide quicker set up and acooler running bladeSix spoke band wheels computer balanced to spin true without vibration3/8", 6 TPI woodworking blade is included so you can start cutting right away

SpecificationsBand Saw Size/Wheel Diameter (In.) 14Cutting Capacity Width (In.) 13 1/2Cutting Capacity Height (In.) 6Blade Length (In.) 93 1/2Blade Speed (SFPM) 3,000Table Size (L x W) (In.) 15 x 15Maximum Saw Blade Width (In.) 3/4Minimum Saw Blade Width (In.) 1/8Table Tilt (Deg.) 10 L, 45 RTable Height from Floor (In.) 43 1/2Dust Collection Minimum CFM Required (CFM) 300Dust Port Outside Diameter (In.) 4Motor Power (HP) 1Motor Phase 1Stand Type ClosedMotor Voltage (V.) 115, 230Prewired Voltage (V.) 115Motor Current (Amps.) 10, 5

17

Qty 2 708115K 14" Bandsaw

JSG-6CS, 6" X 48" BELT / 12" DISCSANDER WITH CLOSED STAND708598K

The JET JSG-6CS Sander combines a 12" disc and a 6" x 48" belt to provide rawindustrial 1.5 HP sanding power. The exclusive dual thumbscrew belt trackingadjustment locks to keep the belt on track while tackling any tough application. Thesander boasts both a quick release belt tension lever and a quick lock dust cover forthe disc. The built in handle allows for easy portability around the workshop whilethe included stand saves room on your workbench.

sanding flat pieces or mitered angles; allows belt sander to be used vertically,horizontally or anywhere in-between

Exclusive dual thumbscrew belt tracking adjustment locks to keep belt on trackduring use

Graphite covered steel platen runs cooler increasing machine and belt life

Specially designed belt guard allows full use of the 6" belt width and length

Drive drum is rubber-coated for a better grip on the sanding belt resulting in lessslippage

Tracking adjustment knob with quick-lock handle keeps belt on track during use

Quick-release belt tension lever makes belt changes fast and easy

Quick-lock dust cover allows fast disc changes

Single 4" dust port on the back of the base collects dust effectively from both thebelt and disc

Powerful 1-1/2HP motor easily handles the toughest sanding operations

Built-in handles for easier portability

One-piece formed steel heavy-duty closed stand with built-in casters providessolid support and portability

Integrated locking wheels for easy mobility

FEATURES

18

Qty 1 708598K Belt/Disc Sander

JSG-6CS, 6" X 48" BELT / 12" DISCSANDER WITH CLOSED STAND708598K

Style (Type) Closed Stand

Disc Diameter (In.) 12

Disc Speed (RPM) 1725

Disc Table Tilt (Deg.) 25 Up, 45 Down

Disc Table Size (L x W) (In.) 16-1/2 x 10

Sanding Belt Size (L x W) (In.) 48 x 6

Belt Speed (RPM) 2500

Belt Table Tilt (Deg.) 20 Up, 45 Down

Belt Table Size (L x W) (In.) 16-3/8 x 9

Dust Port Outside Diameter (In.) 4

Motor Power (HP) 1-1/2

Motor Phase (PH) 1

Motor Voltage (V) 115/230

Prewired Voltage (V) 115

Motor Amps 12/6

SPECIFICATIONS

19

DS20 DISC SANDER, 2HP 1PH230V1791276

The Powermatic DS20 20" Disc Sander is ideal for the professional orserious home woodworking shop. It has direct drive from motor todisc for maximum efficiency, with a hand activated brake for quickstoppage of disc. The DS20 sander has an extra large sandingsurface, adjustable tilting work table, and sturdy cast iron base. Theswing away guard makes changing abrasive discs quick and easy.

FEATURES20" sanding disc for larger capacityDirect drive from motor to disc for maximum efficiencyForward and Reverse SwitchForward and reverse switch for additional usageMiter gauge for angle sandingDisc brake slows the machine quickly and will activateimmediately to stop machine in an emergencyTilting table allows bevel sanding

SPECIFICATIONSDisc Diameter (In.) 20

Style (Type) Disc

Motor Power (HP) 2

Dust Collection Minimum CFM Required(CFM)

600


Motor Phase 1

Recommended Circuit Size (Amps.) 30

20

Qty 2 1791276 20" Disc Sander

OES9138 SANDER, 3HP 1PH230V1791282

The large 11-3/4" x 48" table on the OES9138 oscillating edge sandertravels a full 8" in vertical height to accommodate most woodworking

platen is a generous 48" x 9-1/2" and covered with graphite forproduction sanding, offering super support and cooler running toextend belt life. With 24 oscillations per minute you can use the entirebelt face without burning. A 3HP motor powers the belt and runs alarge gearbox to provide the oscillating action. The entire head pivotson a massive shaft with two sealed ball bearings for trouble-freeperformance. Dual dust collection ports keep the work area cleanand extend the life of your abrasive belt.

FEATURESDual dust collection portsDual dust collection ports keep work area clean and extendabrasive belt lifeHeavy-duty oscillating gearbox and shaft for longmaintenance-free useHinged guard opens for infinite length sandingLarge 11-3/4" x 48" front worktable with 8" vertical travel

any angle and working height neededOscillates 24 cycles per minute for better finish and longerbelt lifePrecision balanced 9" diameter drive drum and 4" diameterrubber coated idler pulley for positive drive and rigid trackingRugged bearing-assisted tensioning device for fast beltchanges and quick adjust trackingSpring loaded, quick release lever makes belt changes quickand easy

SPECIFICATIONSMotor Power (HP) 3

Dust Collection Minimum CFM Required(CFM)

1,100


Motor Phase 1


21

Qty 1 1791282 Oscillating Edge Sander

20" Planer, 5HP 3PH 230/460V, with Byrd® Cutterhead

.Part Number 1791316

Maximum Planing 20 " Maximum Planing Thickness 8 "

Maximum Depth of Cut 3/32 " Minimum Planing Length 6¾ "

Cutterhead Diameter 3 3/16 " Cutterhead Speed 5000 RPM

Feed Rate 24 and 31 FPM (16 and 20 FPM with gear change) Number of Knives 99 Four-sided inserts

Table Size 20" x 55 1/2" (w/extension) Dust Port Diameter 5 "

Dust Collection Min. CFM Reqd. 900 cu.ft/min Bed Rollers Adjustable from Front n.a.

Readout Scale inch/ metric Table Support 4 column

Number of Speeds 4 Rotation Fwd

Amps 2 A Motor Power 5 HP Motor Phase 3 Ph

Motor Voltage 0.5 V Prewired 230 V

Brand Powermatic Overall Dimensions 26 x 36-5/8 x 41-3/8

Height 41.375 inch Width 36.625 inch

Length 26 inch Net Weight 800 pound

22

Qty 1 1791316 20" Planer

1610086

This 8 inchtable leverFence tiltinprovide 73adjustmenstore them

Part NumbeCutting CapCutterheadNumber ofStandard KnTable HeighTable Size (LInfeed TableOutfeed TabFence Size (Fence TiltsFence PositiDust Port OMotor PoweMotor PhasMotor VoltaMotor CurreModel NumBrandOverall DimNet Weight

K

h jointer meetsr can be used tng is accomplis3” long extendents. The operatm on any metal

eracity (W x D)SpeedKnives (Helical/Snife Size (L x W xhtL x W)e Lengthble LengthL x H)

ive Stopsutside Diameterereageent

mber

ensions

60

s the demand fo rapidly positshed by a wormed support. A ning switch is hlic surface for

Standard)x T)

r

HH 8" Jointe

for accuracy wtion table heighm gear system,non mar insertigh mounted foinstant access

1610086K8 x 1/2 "7000 RPM54 four s0.59 x 0.532 "73 x 8 1/235¼ "35½ "38 x 4 3/445 ° forwa45 ° forwa4 "2 HP1 Ph230 V9 A60HHPowerma25 x 73 x490 poun

er

hile combininght, then the ha, smoothly opet in the fence por easy reach,.

K

Msided inserts59 x 0.10 "

2 "

4 "ard, 45 ° backwaard, 45 ° and 90

atic46d

g unique, userandle rotated ferated by a simprotects the taand the push

ard° backward

friendly functifor fine adjustmmple handwheeble from scratblocks have a

ions. The infeement of cut deel. The tablesches duringmagnetic base

edepth.

e

23

Qty 1 1610086K 8" Jointer

Heavy-Duty 20" Variable-Speed Scroll Saw - DW788

Features:Double parallel-link arm design dramatically reduces vibration and noise, for extremely accurate cuts.Exclusive tool-free blade clamps allow blade changes in seconds.On-off switch, electronic variable speed, flexible dust blower and blade-tensioning lever are all located on the front upper arm for added convenience.Arm design pivots from the back of the saw to the front, shortening the arm movement for smoother, quieter operation.Arm lifts so blade can be easily threaded through the material for inside cuts.Unique arm design keeps the blade perpendicular to the work, dramatically reducing over or under cutting.Oversized, cast-iron table provides excellent material support and bevels 45° left and right.

1.3 Amps, 115V, Single Phase

24

Qty 3 DW788 Scroll Saw

DWS780 12" Double Bevel Sliding Compound Miter Saw

Product FeaturesIntegrated XPS cross cut positioning system provides adjustment free cut line indication for betteraccuracy and visibilityPowerful 15 Amp, 3,800 rpm motor delivers extended power and durabilitySuper efficient dust collection system captures over 75% of dust generatedTall sliding fences support crown molding up to 7 1/2" nested and base molding up to 6 3/4" verticallyagainst the fence while easily sliding out of the way for bevel cutsExclusive Back Fence Design cuts up to 2x16 dimensional lumber at 90° and 2x12 at 45°Adjustable stainless steel miter detent plate with 10 positive stops improves productivity and accuracyMiters 60° to the right and 50° to the left providing increased capacityOversized bevel scale makes bevel angle adjustments accurate and easyCompact, lightweight design (56 lbs.) allows for easy transport and storageCam lock miter handle with detent override deliver quick and accurate miter anglesDual horizontal steel rails with innovative clamping mechanism and linear ball bearings deliver anaccurate, durable and compact sawInnovative gearbox and belt drive design increases vertical cutting capacityPrecise miter system and machined base fence support optimize durability and cutting accuracy

SpecificationsBlade Diameter 12"Amps 15AmpsNo Load Speed 3,800rpmArbor Size 5/8" or 1"Vertical Capacity: Baseboard Against Fence 6 3/4"Vertical Capacity: Crown Molding Vertically Nested 7 1/2"Horizontal Capacity: Baseboard Lying Flat 16"Horizontal Capacity: Crown Molding Lying Flat 13 3/4"45° Bevel Cut Capacity (dimensional lumber) 2x14 (2x16 with back fence)90° Cross Cut Capacity (dimensional lumber) 2x14 (2x16 with back fence)90° Cross Cut Capacity (Max Width) 16"45° Miter Cut Capacity (Max Height and Width) 2x12Tool Weight 56lbsShipping Weight 66lbs

25

Qty 1 DWS780 Miter Saw

716300 17” Drill Press

Introducing the new JET JDP 17, 17” Drill Press. From a full 5” of spindle travel to the sturdy cast ironhead with a poly v belt drive system, this drill press is designed to perform. This drill press also featuresa long lasting, built in LED work light to provide direct lighting while reducing shadows. A large 14" x 19"work table provides plenty of support with an edge designed for easy clamping.

Features

Spindle travels a full 5” with one revolution of the handleLarge 14" x 19" precision ground work table features twin T slot grooves and 4 table slots toaccommodate any projectOne handed belt tensioning allows for rapid speed changesPower switch features a safety key and large, paddle style off buttonIntegrated depth stop makes repetitive drilling quick and easyXacta X laser system easily identifies the drill centerLong lasting, built in LED work light reduces shadowsTable edge lip designed to make clamping easyReplaceable MDF table insertLarge cast iron base provides stabilityPowered by an efficient 3/4HP, 1Ph, 115V TEFC motor and poly v belt drive systemCSA Certified

Specifications

Style (Type) Floorstanding Model

Swing (In.) 16 7/8

Spindle Travel (In.) 5

Number of Spindle Speeds 16

Spindle Speed Range (RPM) 210 3500

26

Qty 2 716300 Drill Press

Spindle Distance to Table (Max.) (In.) 30

Table Size (L x W) (In.) 14 x 19

Table Tilt (Deg.) 90 Left and Right

Chuck Distance to Base (In.) 42 7/8

Chuck Distance to Table (In.) 25 7/8

Chuck Size (In.) 5/8

Column Diameter (In.) 3 5/32

Base Size (In.) 20 x 12 5/8

Motor Power (HP) 3/4

Motor Phase (PH) 1

Motor Amps 9


Weight (Lbs.) 187

Overall Dimensions 28 1/2” x 19” x 66”

27

The safe start unit prevents accidental machine start up after a power lost.

49-350 Safe Start Unit

Works with 110V, single phase, non-magnetic starter based conventional machinery.

Section 115711 Tech Ed Equipment Item No. T114 Qty (13)

28

Qty 9 Safety Starter

Saw Stop 10” Industrial Cabinet Sawand Mobile Base

Overall saw dimensions: 44" w x 34" d x 34" h

69 1/4" w x 36 1/2" d x 34" h (w/ fence & 36" rails)

Motor: (all 50-60Hz, TEFC): ICS53230: 5 hp, 3 PH, 230 V, 13 A

Cabinet footprint: 20" w x 25" d

Cast iron table: 24" w x 30" d, 44" w x 30" d (w/ extension wings)

Extension wing: 10" w x 30" d

Extension table: 24" w x 30" d (36" rails)

Weights (may vary with motor): 530 lbs (table saw only)

635 lbs (with fence, 36" rails & table)

Shipping weight (approx.): 640 lbs (table saw only)

Blade: 60-tooth, professional grade, 5/8" arbor

Blade diameter: 10"

Blade tilt: Left

Blade kerf: 3mm

Blade plate thickness: 2mm

Max. depth of cut, blade at 0º: 3 1/8"

Max. depth of cut, blade at 45º: 2 1/4"

Max. rip, right of blade: 36 1/2" (with 36" rails)

Max. rip, left of blade: 12 1/2"

29

Qty 1 ICS53230 SawStop Table Saw

Dado diameter: 8" (requires a separate brake cartridge)

Dado max. width: 13/16"

Arbor diameter at blade: 5/8"

Main bearing size: 62mm OD x 30mm ID

Second bearing size: 52mm OD x 25mm ID

Table in front of blade (max. elevation): 11"

Table behind blade (max. elevation): 9 3/4"

Arbor Runout: 0.001" Maximum allowable runout

Blade lateral movement over full elevation range:

0.006" Maximum

Table flatness measured diagonally: 0.010" Maximum gap

Overall table and extension wing flatness: 0.025" Maximum gap

Blade alignment with miter slot: 0.010" Maximum displacement

Deviation of miter gauge indexing stops from actual:

±0.25º

Alignment between splitter and blade: 0.010" Maximum difference

Miter slots: T-shaped, 3/4" at top, 1" at bottom, 3/8" deep

11 1/8" center-to-center

5 1/2" (arbor flange to center of right slot)

Dust collection port diameter: 4"

Riving knife / splitter thickness: 2mm

Blade guard: polycarbonate, extends only 5/8" to right of blade

Insert: zero clearance, phenolic core, melamine surfaces

Hand wheels: 8" diameter, cast iron with chrome handle

Belts: 2 V-ribbed belts

Included Options: Mobile Base

30

Our Best Desktop Cutter EverCut like never before and build your business right from your desktop with the GS-24. Produce apparel, vehicle graphics, signs, decals and more with ultimate versatility, precision and reliability.

Versatile Cutting Overlap cutting (up to 10x), perforated cutting, and the ability to cut by line color makes seemingly difficult workflows a cinch.

Cutting Force With up to 350 grams of force, cutting and weeding thick substrates like magnetic materials is a piece-of-cake.

Crop Mark RecognitionWith an included optical registration system, the GS-24 recognizes crop marks generated by virtually any inkjet printer, including desktops, perfectly aligning the media to create precise cuts each and every time.

Detailed CuttingThe GS supports a wide range of blades with a variety of offset values, allowing for intricate designs on a wide range of substrates.

Advanced Cutting Features

31

Qty (1) GS-24 Vinyl Cutter Package

Package Includes Basic Sign Shop Start Up Kit With Sample Vinyl and Weeding Kit

3-Year Trouble Free WarrantyPurchase of a GS-24 includes an industry best 3-year trouble-free warranty.

Register your GS-24 at rolanddga.com/warranty or contact your local dealer and take advantage of our Roland Care Premium Program.

RDGA-GS-02 October 2016

• Digital servo motor offers exceptional precision

• Unrivaled compatibility— handles 2" to 27.5" (50 to

700mm) media width

• Cut thick substrates with Overlap Cutting (up to 10x) and

make cutting and weeding easier than ever

• Perforated cut function creates items for individual sale

• Optical registration ensures precise accuracy in cutting

pre-printed graphics

• Maximum cutting speed of 20 inches per second with

350g of downforce

• Easily set offset, speed, and downforce, and generate

cut lines with included Roland CutStudioTM software

• Included stand holds roll media and offers smooth set up

Highlights & Specifications

Roland DG's international ISO certifications are your assurance of our commitment to quality products and service | Roland DGA Corp. has licensed the MMP technology from the TPL Group.

FOR ADDITIONAL PRODUCT INFORMATION AND FEATURES, OR TO REQUEST A SAMPLE PRINT, CALL 800-542-2307 OR VISIT WWW.ROLANDDGA.COM/GS24ROLAND DGA CORPORATION | 15363 BARRANCA PARKWAY | IRVINE, CALIFORNIA 92618-2216 | 800.542.2307 | 949.727.2100

Cut More MaterialsCut dense material from 2” to 27.5” wide. Cut vinyl, paint mask, twill, heat transfers, sandblast material and more to create everything from signs to rhinestone apparel.

Perforated Cut FunctionThe easily selectable perforated cut function minimizes the need for weeding and allows you to create decals that are ready for individual sale.

Keep it SimpleWith an intelligently-designed LCD panel, blade groove on its apron for manual cutting, and a stand to comfortably hold rolls, the GS-24 is as easy-to-use as it is advanced.

Speed That's Spot OnAn innovative digital servomotor cuts vinyl and other materials at speeds up to 20-inches per second. At the same time, a curve-smoothing function precisely cuts at speed to optimize productivity and efficiency.

Roland CutStudio IncludedQuickly and easily output cut graphics, including resizing, repositioning, rotating, and mirroring images. The GS-24 also cuts oversized images using an improved tiling function, and cuts true type fonts without the need for outlining. CutStudio supports many different file formats, and can cut directly from Adobe Illustrator or Corel Draw.

32

Chair

HANNAH TASK

HANNAH

• Swivel-tilt task chair with casters

• fixed arm with black pad.

• Adjustable seat height.

• Thermoplastic seat and back available in multiple colors.

• Seat frame available in 19 powder coat colors.

Seat/Back: Choose from our selection of thermoplastic

colors.

Frame: Choose from our selection of powder coats.

Casters

See mediatechnologies’ Finish and Color Guide for

choices at https://www.mediatechnologies.com/

resources/finishes

HANNAH TASK CHAIR STANDARD SIZES

MODEL DEPTH” WIDTH” OVERALL

HEIGHT”

SEAT

HEIGHT”

HAN107 18 23.5 28.75-32 15.75-20.25

General Specifications

Seat/Back: Seat is formed thermoplastic. Hannah Task is a Swivel Task

Chair. Arm rest versions are available for all Hannah items.

Frame: The frame assembly is comprised of 1”, 16-gauge powder coated

steel tubing. The frame is completely welded. Black bell glides are standard

for non-mobile units. Mobile units are fitted with twin-wheel locking casters

for multiple floor surfaces.

Arms (if applicable): Arm frames are to use the same powder coat as

frame, to match. Arm rests are black.

33

Qty 3 HAN107 Instructor Chair

ChairHANNAH

HAN001 18”D x 18”D x 29.5”H

HAN001

HANNAH

General Specifications

Seat/Back: Seat is formed thermoplastic. Hannah is available as a stacker chair, chair on casters, counter height stool, bar height stool, swivel task chair and swivel task stool. Arm rest versions are available for all Hannah items. For upholstered Hannah seat you must order the desired thermoplastic seat AND the Hannah Upholstered Seat Cushion (HAN600A), in the grade you desire, as separate items.

Frame: The frame assembly is comprised of 1”, 16-gauge powder coated steel tubing. The frame is completely welded. Black tap-in ABS glides are standard for non-mobile units. Mobile units are fitted with twin-wheel locking casters for multiple floor surfaces.

• Mix things up with the versatile, pocket-posture comfort of the Hannah series!

• Hannah Chairs are Stacker Armless Chairs

To Order, Choose Finish Selections & Options

Seat/Back: Choose from our selection of

thermoplastic colors.

Frame: Choose from our selection of powder

coats.

See mediatechnologies’ finish selections at https://www.mediatechnologies.com/resources/finishes

• The Hannah series is a former izzy+ product.

HANNAH CHAIR STANDARD SIZES

MODEL DEPTH” WIDTH” OVERALL

HEIGHT”

SEAT

HEIGHT”

HAN001_ 18 18 29.5 18/19

34

Qty 24 HAN001 Student Chair

approved bidder's specification for innovation

Documents