approved hse and fire equipment (1)

7/25/2019 Approved HSE and Fire Equipment (1)

1/71

Abu Dhabi Company for Onshore Oil Operations (ADCO)

By: Safety Equipment Review Committee (SERC)

pproved HSE Fire

Equipment Brands Models


2/71


3/71

3 |P a g e

Table of Contents

1. Introduction

2. Aims & Objectives

3. Abbreviations and Definitions

4. User Guide

5. Safety Equipment Review Committee (SERC)

5.1 Committee Charter5.2 Committee Process Map

6. Personal Protective Equipment (PPE)

6.1 Head Protection

6.2 Hearing Protection

6.3 Eye Protection

6.4 Hand Protection

6.5 Footwear

6.6 Body Protection7. Respiratory Protective Equipment (RPE)

8. Gas Detection

9. Oil Spill Containment Materials

10. Fire Fighting and Rescue Equipment

10.1 FIRE EXTINGUISHERS AND BLANKETS

10.2 PPE

11. Showers and Eyebaths

12. Miscellaneous

13. Appendices

13.1 SERC Charter

13.2 SERC Operation and HSE Equipment Pre-Qualification Process Map

13.3 Related UPGs and their description

13.4 Sample Technical Evaluation sheet


4/71

4 |P a g e

1. Introduction

This document will introduce the Safety Equipment Review Committee (SERC) roles and

responsibilities in ADCO. As well as identify all the HSE equipment evaluated and approved

brands/models by SERC that can be used in ADCO. Moreover, This documents also includes all

the minimum specifications including the international standards of all the HSE equipment

required for ADCO, this information is linked by the UPG and MESC no's to ensure that it is fully

integrate into the current Supply chain management systems such as e-registration, commercial

directory etc...

This is a live document and will be updated in a yearly basis mainly to update the newly

approved brands/ models from SERC and in reflection of the commercial directory.

2. Aims & Objectives

The main objective of this document is to centralize in one document all the approved HSE

equipment brands/models and minimum specifications. As well as, to ensure that all HSE

products purchased by end-users, shall meet the approved ADCO minimum specifications and

standards.

The main stakeholders of this document will be, end-users whom will purchase HSE items,

contract administrators to link it with the SCM system, and HSED to ensure that all equipment

used in ADCO meet the identified minimum specifications.


5/71

5 |P a g e

3. Abbreviations and Definitions

ANSI American National Standards Institute

ASTM American Society for Testing and Materials

ATEX Certified electrical equipment for explosive atmospheres.

BASEEFA British Approval Service for Electrical Equipment in Flammable Atmospheres

BS British Standards

CE Markings declaring the product meet EC directives.

CEN Committee European de Normalization (European Committee for Standardization)

CFR Code of Federal Regulations (US)

CSA Canadian Standards Association

DIN German Institute for Standardization

EN European Standards

ISO International Standards Organization

MESC Material and Equipment Standards & Code

MSHA Mine Safety and Health Administration

MSA Marine Safety Agency

NIOSH National institute for Occupational Safety and Health

NFPA National Fire Protection Association

OSHA Occupational Safety and Health Administration

PPE Personal Protective Equipment

RPE Respiratory Protective Equipment

SCBA Self-Contained Breathing Apparatus

SERC Safety Equipment Review Committee

UPG Unified Product Group

UL Underwriters Laboratories


6/71

6 |P a g e

4. User guide

Key Description

1 Name of the Equipment

2

Unified Product Group (UPG): Is a unified number that identifies the main category

under which that specific product falls under, which is used commonly across the major

ADNOC Group companies. This is mainly used to identify through ADCO e- Registration

System who are the pre-qualified suppliers that can provide this specific equipment.

(see Appendix 13.3 for all related UPGs and their description)

3

Material and Equipment Standards & Code (MESC): Is a unique number in ADCO

MAXIMO system that represents that specific equipment including all its details (i.e.

minimum specs.). This is mainly used during raising a price agreement or a purchase

order for buying the specific equipment through MAXIMO.

4 This is the minimum specification identified by ADCO for that specific equipment.

5This identifies the specific model name/no. and its brand name (manufacturer)

approved by SERC after technical evaluation.

6This image is only to support the reader in visualizing the equipment mentioned and

doesnt certainly reflect the detailed specification.


7/71

7 |P a g e

5. Safety Equipment Review Committee (SERC)

The SERC was formed by the VPHSE and approved by the CEO mainly to increase the number of

approved brands and models of HSE equipment that can be used in ADCO, and by default

increase the number of suppliers providing these brands to promote competitive bidding as well

as giving the chance for different suppliers to provide their best products in the market.

The SERC main role is to evaluate new HSE products ensuring it meets ADCOs minimum

specifications and standards.

5.1 SERC Charter

The committee is governed by the latest charter below which was approved by the CEO on

11/12/2011. This charter identifies the committee members, committee roles and

responsibilities and mode of operations.

The members of the committee are representatives from all assets and functions; Operations

representatives, Drilling representatives, Engineering &Projects representatives, General

Services Division representatives, Fire & Rescue Representative as well as the option of inviting

when required any subject matter expert.


8/71

8 |P a g e

5.2 SERC Process Map

Safety Equipment Review Committee (SERC) has developed a transparent, auditable and

systematic process that governs SERC operation in regards of HSE equipment pre-qualification,

SERC Operation and HSE Equipment Pre-Qualification Process Map, as shown below,

identifying the roles and responsibilities of all stakeholders, the process starts from the point

the Vendor applies for a portable HSE equipment through ADCO e-registration System until it is

technically evaluated and updated in the ADCO Commercial Directory and the Updated HSE

Equipment List. (See appendix 12.4 of the technical evaluation form)


9/71

9 |P a g e


10/71

10 |P a g e

SAFETY HELMET - PEAK TYPE UPG no. 623517MESC no. 9643304009

A hard hat is a type of helmet predominantly used in workplace

environments, to protect the head from injury by falling objects,

impact with other objects.

Fully insulated, made out of glass fiber, c/w legible print

ADCO logo at the front side of the hat and provision to

connect a chinstrap. A rotating Knob on the rear of the

suspension harness to adjust the size (of the head band). V-

Guard Type

BS EN 397, 1987 / ANSI Z89. 1-1986.

HEAD PROTECTION

MSA V-GARD

UVEX Pheos/Airwing B

SELLSTROM Cap Style Version

NORTH The Peak A79-A69

Honeywell/fibermetal Roughneck ( P2A-P2HN)

Roughneck (P2HNRW)

P2N,P2HN,P2NQ,P2HNQ

Cap

Duo Safety Cap-Style

bullard C-30R helmet

5055 FT01 chin strap

Voss Helmet INAP-PCG


11/71

11 |P a g e

WELDING HELMET UPG no. 623517MESC no. 9649201009

Welding helmets are headgear used when performing certain

types of welding to protect the eyes, face and neck from flash

burn, ultraviolet light, sparks, infrared light, and heat.

Welding helmet with face shield, light weight thermoplastic with

green lens and double stop locking device. The face shield with

non-conductive spark guard with clear lens and ratchet

suspension system. Or with adjustments on the back of the

headband of helmet for easy sizing and a comfortable fit.

-BS 5240, 1987 / ANSI Z89.1-1986.

NORTH PROTA SHELL


12/71

12 |P a g e

EAR PLUGS UPG no. 623540

MESC no. 9664171089

An earplug is a device that is meant to be inserted in the ear

canal to protect the user's ears from loud noises.

Aural protectors ( Disposable), insert type ear plugs molded of

soft silicone rubber, to fit all sizes of ear canals. Noise

reduction rating 26 db.

-ANSI S3.19-1974. Or BS EN 352-2:2002 or equivalent

EAR MUFFS UPG no. 623540MESC no. 9664171689

Earmuffs are objects designed to cover a person's ears for

protection from loud noises.

Light weight with minimum sound attenuation 28 dB at 500 HZ

to 40 dB at 4000 HZ c/w thermo plastic adjustable all-purpose

head band.

-ANSI S3.19-1974.

HEARING PROTECTION

MSA ACCU-FIT AURAL PROTECTOR. Part

No. 459611

EAR/AEARO Ear Muff 4000 EAR

Model CA MG-01-007

UVEX x-fit ( corded and Un-

corded)

BEAR GLOBAL/PMR

Safety

( corded and Un-corded )

HOWARD LEIGHT laser light

ELVEX Uni-fit EP-153

Honeywell/Haward

Lieght

Bilsom 303

MSA MK IV foe Noise foe Part No.

95635.


13/71

13 |P a g e

NON-PRESCRIPTION SAFETY

GLASSES

UPG no. 623515

MESC no. 9649107269

Safety glasses are a kind of eye protection against flying

debris.

Eye protectors safety spectacles with adjustable

grey/blue/black frame and scratch resistant

polycarbonate lenses containing UV inhibitor reducing UV

rays c/w side shields. (Clear lens or shaded lens)

- ANSI Z87.1

- BS EN 168:1995, BS EN 166:1996, BS EN 167:1995

- CSA Z 94.3 M88 Class 1 (A, B).

EYE PROTECTION

KES TREL Model lens K 712 A Lens

SELLSTROM GRAFIT Model

SEBRING 400 SERIES

TECHNOSPORTS II

ITEX Model 490,

P/No.M8455/01

UVEX Astrospec Model UW9168-067

FIBRE METAL Model No.CR 39.

GREENHAM

ARCO Ref... P2 NEVAPIT

BUCK & HICKMAN Model No. 32-3321-2.

SELLSTROM Model No. 19512, 19002

and CR 39.

MSA

CLEAR VIEW

NORTH T5655 N-Vision

Cordova

Canasafe

Dapro DAP-EWS-ENG-G00-01

Red wing shoes protective

wear ( clear/dark )

95204/95205


14/71

14 |P a g e

PRESCRIPTION SAFETY GLASSES UPG no. 623515MESC no. 9649107269

Safety glasses are a kind of eye protection against flying debris

with prescribed lenses.

Eye protectors safety spectacles with grey/blue/black frame

and scratch resistant polycarbonate lenses containing UV

inhibitor reducing UV rays c/w side shields.

-BS EN 168:1995, BS EN 166:1996, BS EN 167:1995

- CSA Z 94.3 M88 Class 1 (A, B)

-Rx: ANSI Z87.1 (frame)

-Rx: FDA CFR 801.410 (PC lens)


15/71

15 |P a g e

FULL VIEW GOGGLES/FACESHIELDS (HAZARDOUS

OPERATIONS)

UPG no. 623515MESC no. 9649101029

Eye protector with full view wide vision type and clear frame.

Eye protectors full view wide vision type with clear frame, non-

mist polycarbonate lens conforming to BS 2092, impact grade

1,protection against C (Chemical), D (Dust), G (Gas) & M (Molten

metal).

-BS EN 166, BS EN 167, BS EN 168. BS 7028 / ANSI

-Z87 -1 or equivalent, CSA Z 94.3 M88 Class 2 (A)

ARCO REF. NO. EG-230.

UVEX MODEL UW 9301-714SELL STORM 88010

81010

80230

880 SERIES

NORTH Model PG 1060 SAG

Honeywell Sperian V-Maxx

MSA Clearvue 200

ELVEX GG-25C-AF

GG-30C-AF

UNIVET UNIVET-Clear 602

UNIVET-Clear

601.03.0700


16/71

16 |P a g e

EYE PROTECTION (WELDING

OPERATIONS)

UPG no. 623515

MESC no. 9649202009

Welding helmets are headgear used when performing certain

types of welding to protect the eyes, face and neck from flash

burn.

Welding helmet with face shield, light weight thermoplastic

with green lens and double stop locking device. The face shield

with non-conductive spark guard with clear lens and ratchet

suspension system.

ANSI Z87.1.1989 or equivalent.

PROTA SHELL B.S. 1542-3-4

DIN 58214/6

ANSELL EDMONT .


17/71

17 |P a g e

General Purpose Gloves UPG no. 623512MESC no. 9643203209

General purpose gloves are used in day to day activities

in the field that protects the hands from dirt and

mechanical hazards.

Cotton lined with chrome leather palm and knuckle

strap, vein patch, Non slip, rugged for handling rough,

sharp or slippery material with natural rubber coating.

-BS EN 388:2003 (tear/puncture/cut/abrasion resistance)

HAND PROTECTION

ANSELL EDMONT HYLITE. Ref. No. JF -

11848

JAMES NORTH

SONELY GLOVES

VENTZONE

LAI KAI

McKOWAN LOWE Ref. P/N HICS 5231

KING'S GLOVE CO Model No. KM 4040.

LAI KLI Model No. 3050

Broad wood Ref. CRS-2G/DM/JP

REDWING Model No. 51125 and

51127.

UVEX TG 6000

No.60288

Allen Cooper SUSSEX

BEAR GLOBAL TITANIC

Penguin Safety ARCTIC

FT Protective Line HG.1109

SUNTEX 1402

1202


18/71

18 |P a g e

GLOVES (Chemical handling) UPG no. 623512MESC no. 9643203409

Gloves are used during chemical handling that protects the hands

from hazardous chemicals.

Gloves for protection against chemicals having resistance to

penetration (leakage) of air, water and chemicals.

-Pr EN 374 or equivalent. (Penetration and permeation)

-BS EN374-3- Chemicals

ANSELL EDMONT NEOPRENE

Ref. No. JF-8159

John Ward & Sons Ref. JO P44 PVC

Chemical Glove

UVEX PB40M

No. 98904

Summitech

Professional

NP-F-07

SHOWA 720 Nitrile

660 ESD oil resistance

772 ARX Nitrile Long

Sleeve


19/71

19 |P a g e

Electrical Work (Rubber gloves) UPG no. 623512MESC no. 9643201059

Gloves are used during handling wiring and electrical connections

with High Voltage, which protects from electrical hazards.

Surf Industrial 821c-42 nitrile flock line medium weight non slip.

-BS 697 or equivalent

JAMES NORTH .


20/71

20 |P a g e

GLOVES (Thermal risks For

Welders)

UPG no. 623512

MESC no. 9643204359

Gloves that are used during handling objects with high

temperatures, such as during welding.

Gloves for protection against thermal risks having resistance to

small drops of molten metal and contact heat from 100o c to

500o c. Size 14" L. heavy duty heat resistant gloves that can be

applied for TIG/MIG/ SMAW welding, fabrication and material

handling.

- EN 407 or equivalent.

ANSELL EDMONT Nitrile coated Hot mill

gloves Ref. No. JF - 6881


21/71

21 |P a g e

SAFETY BOOTS (Short neck-office

type)

UPG no. 623510

MESC no. 9643104209

Durable boot or shoe that has a protective

reinforcement in the toe which protects the foot from

falling objects or compression, protect against punctures,

for office use.

Leather, with synthetic rubber soles and heels, anti-

static. Chrome leather uppers, leather lined throughout

soles and heels. Oil, alkali, acid and heat-resisting,

minimum 160 degrees C. Not iron shod and to have good

anti-slip properties and puncture resistant stainless steel

midsole. With or without lace. Metal free 200 Joules

protective toe cap and anti-perforation insert long life.

- BS 1870 Part 1, 1988 or DIN 4843 or equivalent.

- S3 / EN ISO 20345

FOOTWEAR

REDWING No. 6602, 6604 or

6607

JALLATTE JALTIBRE SASLemaitre (France) Sir ius S3C1

Vega-Lemaitre

Jal Accolon (France) JM102 - Jallatte Non

Metallic.

Lemaitre (Orions S3)

Robusta (Cedro)

Lemaitre Orion

Lemaitre (Boru / S3CI)

Robusta (olivo)

Torjan Black 6G9800

Breva Turbo Lemaitre

Kelvin Hiker Pezzol 519


22/71

22 |P a g e

SAFETY BOOTS (Short neck-

outdoor type)

UPG no. 623510

MESC no. 9643104509

Durable boot or shoe that has a protective reinforcement in

the toe which protects the foot from falling objects or

compression, protect against punctures.

Leather, with synthetic rubber soles and heels, anti-static.

Chrome leather uppers, leather lined throughout soles and

heels. Oil, alkali, acid and heat-resisting, minimum 160

degrees C. Not iron shod and to have good anti-slip

properties and puncture resistant stainless steel midsole.

With or without lace. Metal free 200 Joules protective toe

cap and anti-perforation insert long life.


- EN ISO 20345

Lemaitre Solano

REDWING Model No. 8212.

A0783 - Jallatte Non Metallic

Jalrafting J0260 - Jallatte Non Metallic

Formio Robusta


23/71

23 |P a g e

Safety Boot / Shoe (short neck -

Ladies)UPG no. 623510

MESC no. 9643104309

Durable boot or shoe that has a protective reinforcement in the

toe which protects the foot from falling objects or compression,

protect against punctures.

Leather, with synthetic rubber soles and heels, anti-static. Chrome

leather uppers, leather lined throughout soles and heels. Oil,

alkali, acid and heat-resisting, minimum 160 degrees C. Not iron

shod and to have good anti-slip properties and puncture resistant

stainless steel midsole. With or without lace. Metal free 200 Joules

protective toe cap and anti-perforation insert long life


- EN ISO 20345

Lemaitre (France) Vega

Lemaitre (France) Orion

Cedro Robusta


24/71

24 |P a g e

Safety Boot (Long Neck-outdoor) UPG no. 623510MESC no. 9643103209

Durable boot or shoe that has a protective reinforcement in

the toe which protects the foot from falling objects or

compression, protect against punctures.

Leather, with synthetic rubber soles and heels, anti-static.Chrome leather uppers, leather lined throughout soles and

heels. Oil, alkali, acid and heat-resisting, minimum 160

degrees C. Not iron shod and to have good anti-slip

properties and puncture resistant stainless steel midsole.

With or without lace. Metal free 200 Joules protective toe

cap and anti-perforation insert long life


- EN ISO 20345

Jalhaka J0650 - Jallatte Non Metallic

M Canyon 520 S3 - PezzolRobusta & Robusta (Aster)

JALLATTE JALASKA SAS

REDWING No. 8264

Black & Brown 6J5600 Torjan

Buran Lemaitre


25/71

25 |P a g e

Safety Boot(long neck -/HV

Electrical work )

UPG no. 623510

MESC no. 9643102509

Durable boot protect against high voltage and electrical

hazards.

Long neck, Leather boots with electrical hazard protection,

water repellent and steel toe with Fiberglass Shanks and Poron

4000 Cushion.

- ANSI M 175/C75 rated.

Jalhaka J6050 - Jallatte Non MetallicM Canyon 520 S3 - Pezzol

Carpe ESD Robusta Half Neck Boot

REDWING 4439 - Short Neck 4440

- Long Neck

Red Wing Black 6680

JALLATTE JALMAIA SAS Short Neck

Buran B4036 RCC - Lemaitre


26/71

26 |P a g e

Safety Boot(long neck -

HAZMAT/chemical

UPG no. 623510

MESC no. 9643102609

Durable boot protect against Chemical hazards mainly used for

HAZMAT team.

Rubber boots, knee length, with multi ribbed steel shanks for arch

support, heavy tread soles for non-slip traction and tough,

comfortable fabric linings. C/w steel safety toe and midsole.

-OSHA Approved

REDWING .

Haix (Ateco)


27/71

27 |P a g e

SAFETY COVERALL UPG no. 623508MESC no. 9643703509

Coverall is to protect the body during working in areas with

risk of fires.'NOMEX' is registered trade mark of Dupont, U.S.A.

which is an aromatic Nylon which has Flame Retardant

properties by virtue of chemical synthesis. This also helps in

insulating properties. Hence the garments made from this

fiber exhibits very high standards of Flame Retardancy for the

full life of garments.

Coveralls, long sleeve (either one piece or two pieces - trouser

& jacket), having low thermal conductivity with permanent

protection against flame and heat (NOMEX lll-A Type). Double-

stitched, silver reflective strips on arm & legs Colors: Petroblue for operations, maintenance and construction employees

and beige for HSE staff.

- EN 531 A, B1, C1 or equivalent.

- NFPA 2112

- BS 6249,1982 or equivalent

- Antistatic (EN1149-3)

BODY PROTECTION

Big Ben, USA SSO Egypt

Red Wing China Style 77121

Lemaitre Sirrius S3C1

AirIna - USA Art No. 0101AI158

Tecasafe - Holand Art No. 01103FT158

Kermel France

Red Wing Mexico Style

Hammer-UK

NOMEX IIIA - USA Art No. 0105FT158

Red Wing China Style

Dale Anti Flame - Norway Art No. 0169PL158

Taesan Industrial Cooperation

Flash Armour flame retardants

wears

Biulwark Protective Apparel

Savior

Bulwark Protective Apparel


28/71

28 |P a g e

SPLASH RESISTANT CLOTHING

(DISPOSABLE TYPE)

UPG no. 623508

MESC no. 9643703109

Overall disposable clothing that will protect the body from

chemical splashes, usually used by the HAZMAT team during

cleanup/responding to an oil spill incident and cleaning of

tanks from oily sludge.

Made from unique combination of non-woven fabrics, is

resistant to dust and splash. The fabric is breathable and

therefore very comfortable to wear over normal working

coverall. Disposable.

- BS 5958, EN1149-1 or DIN 54345 TI (Anti-static)

- EN 14325 (resistance to chemicals)

- CE certified for type 5 & 6 (EN 13034:2005 and EN ISO 13982-

1:2004)

DAILYS-UK, Model: CNDCW

DAILYS-UK, Model: AQUAW

Tyvek Pro Tech

O-MEN Far East

KLEENGUARD EP

COVERALLS

Manufactured by:

OLAYAN KIMBERLY

CLARK ARABIA

Safe Guard 76-Lake

Land

Safe Guard 76

SAVIOR CN4012CW


29/71

29 |P a g e

Lab Coat

A white coat or (lab coat) is a knee-length overcoat/smock

worn those involved in laboratory work. The coat protects

their street clothes and also serves as a simple uniform.

Durable fabric, excellent breathability. fluid and particulate

barrier. Soft, cloth-like fabric.

-ASTM F903 (chemical resistance)

Full Body Harness UPG no. 623524MESC no. 623524

Fall arrest is the form of fall protection which involves the

safe stopping of a person already falling. It is one of several

forms of fall protection, forms which also include fall guarding

(general protection that prevents persons from entering a fall

hazard area e.g., guard rails) and fall restraint (personal

protection which prevents persons who are in a fall hazard

area from falling, e.g., fall restraint lanyards).

Safety harness, full body type, in nylon or polyester,

Minimum Features:

2 Shoulder D-rings

Tongue Buckle

Waist straps

Chest straps

Thigh straps

-EN 361 (falling from height)

FALL ARREST EQUIPMENT

TRACTEL Model PR2 RangeBS 1397/1979

DBI SALA - USA ..

TRACTEL USA ..


30/71

30 |P a g e

Respiratory Protective Equipment


31/71

31 |P a g e

SELF CONTAINED BREATHING

APPARATUS (SCBA)

UPG no. 623516

MESC no. 9658200559

A device used by rescue workers, firefighters, and others

to provide breathable air in an IDLH (immediate danger to

life and health) atmosphere.

Complete set of Self Contained Breathing Apparatus

(SCBA), positive pressure, light weight set with Carbon

fiber air cylinder.

- 30 minutes duration.

- Optional: In addition the packs to be supplied with

retractable 25m personal line and DSU / Body Guard

system.

-EN 136.

- EN 137 Class II standard.

- NFPA and Marine Safety Agency (MSA)

-NIOSH (Face mask).

Respiratory Protective Equipment

Approved

BRAND Model name/code

MSA Ultralite I

Fire Hawk M7

Drager (PA-95 )

PSS 3000

Fast Mask .

Scott .

SABRE LW ..

Sperian Fenzy Aeris Confort Typ 2


32/71

32 |P a g e

Escape set UPG no. 623519MESC no.9658201609

An escape set is a breathing set, which lets its wearer survive

for a time in an environment without (sufficiently) breathable

air, in particular underwater, primarily or originally intending

mainly to survive long enough to reach safety where the air is

breathable.

Positive Pressure, Duration (15 min), Easy to wear (fit all),

Auto activation (if positive pressure), Light Weight and Proper

sealing.

-EN 402:2004 (mouthpiece/full face mask)

-EN 1146:2006 (Hood-type)

Approved


Frenzy Bioscape (15 minutes)

Camlock NA

Sabre Sprint 15B, 15 minutes

Drager Saver PP15 (15 minutes)

Scott Sprint -15-B


33/71

33 |P a g e

Airline Trolley UPG no. 623519

MESC no.9658200209

The airline trolley system provides a portable compressed air

supply system for the users of airline breathing apparatus.

Compressed Air Breathing Apparatus, Trolley mounted c/w

two sets of Airlines, positive pressure type, full view face

masks and cylinders with 200-300 bars capacity, one 'Y' piece

and 30 meters of extension air hose.

-BS 4667 Part 3, 1974.

Spray Painting Respirator Mask for painting in enclosed areas.

Respirators for protection against paint vapor mists, lacquers

and enamels;

Filter/cartridge depends on the chemical hazard.

-MSA, NIOSH and MSHA.

APPROVED


Drager Airpak & Airpak 1

Universal Airline 500 Breathing Apparatus

Trolley

Respirators (Paint Spray & Mist) UPG no. NAMESC no.9658301409


34/71

34 |P a g e

Non Toxic Dust Particles Mask(Disposable Type)

UPG no. 625520MESC no.9658302409

Flexible pad held over the nose and mouth by elastic or rubber

straps to protect against dusts encountered during construction

or cleaning activities, such as dusts from drywall, concrete,

wood, fiberglass, silica.

Protection against Dust; Disposable, Perfect fitting of the mask

over the face, double-elastic head straps.

-MSA- NIOSH N 95 & MSHA

APPROVED


BEAR Global/PMR

Safety

No.P910-N95

NORTH sperial

Cordova NX95

3M 8511

FT protective line particulate respirator

2760

SAF-T-FIT Plus

Molded Cup

TC-84A-3769

San Huei N95 Particular


35/71

35 |P a g e


36/71

36 |P a g e

H2S PERSONAL MONITOR UPG no. 621585MESC no. 9661251309

A portable sensor/detector to monitor the H2S concentration levels at a personal level.

-Operations: Continuous ON. No switch off"

-Sensor Range: 0-100 ppm

-Intrinsic safety:

(Europe: Eex ia IIB T4 (CENELEC) UL/cUL: Class 1 Div Groups A, B, C,

D T4 CE EN50270:1999 and EN55011or EN 60079-0:2009 EN

60079-1:2004 EN 60079-11:2006 EN 50054, EN 50057)

-Audible, Visual and Vibration Alarm - Type: above 80dB

-Temperature Range: (-20'C to 50'C+)

-Humidity: 15 - 95 % non-condensing

-Environmental protection: Weather and impact resistant

-UL Classified both US & Canadian Safety Standard. CE conforms to

European Directives

-CE-Sign (89/336/EEC, 94/9/EC)

-ATEX I/II M 1/1 G EEx ia I/IIC T4

Gas Detection

Ali & Sons .

Abu Dhabi Maritime &

mercantile

International Co.

.

3M ..

Crowcon ..

SABRE LW ..

BW Gas Alert H2S

Personal Monitor

ToxiRae ..


37/71

37 |P a g e

Gas detection(Stand-alone) UPG no. 621585MESC no. 6055591109

Portable multi gas detectors to be used in areas with high H2S

concentration release. To monitor the concentration levels

while activities are ongoing.

Standalone Multi-Gas Monitor, temperature Range: (+ 50'C+),

humidity: up to 95 % non-condensing, environmental

protection: All weather resistant, audible alarm (above 100

dB), Visual Alarm (360 degree beacon), can be used in zone

zero (intrinsic), equipment weight less than 7kg, downloadable

data logging storage.

-UL 913

Crowcon (Detective Model)

AlMasood (MOISS)M/s Telectron ..

Ali & Sons

Abu Dhabi Maritime &

mercantile International Co.

..


38/71

38 |P a g e

GAS DETECTION (3 IN 1) UPG no. 621585MESC no. 9661251809

Gas measuring and warning instrument for H2S, Combustible

gas and oxygen combined in one. Mainly used for gas testing

of confided spaces before commencing work.

Gas measuring and warning instrument for H2S, Combustible

gas and oxygen combined in one, c/w integral pump for

sample aspiration, three respective sensors, battery charger,

sample probes, leather carrying case and calibration kit. 3 IN 1

Classified by UL as intrinsically safe for use in Hazardous

locations. CE conforms to European Union Directives EX

Conelec (DEMKO).

MSA Watchman

Biosystems PHDLite BW Gas Alert Micro(3 IN1)

PHDLite Multi Gas Detector(3

IN1)

PHDLite Multi Gas Detector(4

IN1)

BW Gas Alert Micro (3 IN1)

Drager X-am- 7000 Multi gas monitor

SCOTT Multi-Gas Personal Monitor

Model No. SCT

OLDHAM MULTIHUED


39/71

39 |P a g e


40/71

40 |P a g e

INFLATBLE OFFSHORE BOOM UPG no. 628510

MESC no. 967530259

Temporary floating barrier used to contain an oil spill

used in unstable waters.

-Inflatable offshore boom: wave height in meter: 0-1

-Inflatable offshore boom free board: 305mm- 380mm

-Boom draft: 400mm-460mm

-Open water ocean boom: wave in meter >1 m

-Free board: 500mm- 545 mm

-Boom draft: 700mm- 755mm

-Towing bridle: aluminum at all time

OFFSHORE FOAM BOOM UPG no. 628510MESC no. 9675302509

Temporary floating barrier used to contain an oil spill

used for inland and sheltered waters.

-Foam filled booms are lightweight.

- They are made in PVC or Urethane with round or flat

floats

-Freeboard: 310mm-366 mm

-Boom draft: 400mm-600mm.

Oil spill Containment Material


41/71

41 |P a g e

SHOREGUARDIAN BOOM UPG no. 628510MESC no. 9675302759

Temporary floating barrier used to contain an oil spill it is

designed for use at the water's edge as a beach seal,

which is effective throughout the tidal range, or to

protect marshes and other low water level areas from

approaching oil spills. The boom can also be used in

shallow rivers to improve oil recovery operations by

acting as a dam to increase water depth.

-Shore guardian boom is a triple tube design.

- The two lower tubes are water filled whiles the upper -

tube is air inflated.

-Freeboard: 200mm-280mm

-Boom draft: 200mm-280mm.

ABSORBENT BOOM UPG no. 628510MESC no. 9675302109

Disposable booms to absorb oil from water and to help

make recovery easier.

-The Boom absorbs the oil from the water.

-Absorbency: 32 gal/bale

-Length: 3 m

-Width: 13cm.


42/71

42 |P a g e

ABSORBENT PADS UPG no. 628510MESC no. 9675302009

Are designed to absorb oil spills and other petroleum

based liquids while repelling water.

- The absorbent sheets suitable for absorb the oil from

water.

-Volume absorbency per pkg- 26Gl

-Length: 19" -Width: 15" -Material: 3 Ply

-Absorbency Weight: Heavy weight.

Weir Skimmer UPG no. 628515MESC no. 9675542109

An oil skimmer is a machine that separates a liquid from

particles floating on it or from another liquid. A common

application is removing oil floating on water used moving

waters.

- Free-floating weir skimmer has the ability to follow

choppy waves.

-Coupled with its high buoyancy-to-weight ratio and low

inertial mass.


43/71

43 |P a g e

Boom Inflator UPG no. 628510MESC no. 9675303009

Air blowers for boom inflation.

-These range from portable

-Lightweight backpack style units.

DISK SKIMMER UPG no. 628515MESC no. 9675541109

An oil skimmer is a machine that separates a liquid from

particles floating on it or from another liquid. A common

application is removing oil floating on water the area of

usage is harbors, bays, coastal water, river and lakes.

The equipment is suitable to recover light to medium

viscosity oil.

-Disk skimmer min depth 5cm. -Length: 124cm

-Width: 122cm -Height: 87cm

-Disk Diameter: 33cm -Disk speed 0-80 rpm

-Recovery rate 85-95 % -32 disks oleophilic plastic

-Power pack included.


44/71

44 |P a g e


45/71

45 |P a g e

Powder Extinguisher Hand Held UPG no. 621518

Dry Powder Fire Extinguishers are suitable for mixed fire risk

environments and are especially suited for flammable liquids and

fires involving flammable gases such as methane, propane,

hydrogen, natural gas etc. This range offers a combination of fire

performance and ease of service.

Steel Cylinder with discharge hose

Rubber beading at the bottom of the extinguisher body

Anti-corrosive painting

Pressurized by internal cartridge

Shall be free flowing & non caking

Chrome Plated Brass valve

Stainless steel handle & lever

Temperature range: -30/+60 C

With wall bracket as standard

Strike-knob operation

Labeling in English

Wall Bracket

Easy refilling option

-UL Listed or FM

-BS EN 3

- NFPA 10

- Fire Class A, B & C

FIRE EXTINGUISHERS AND BLANKETS

Bristol .

Angus .

Chubb ..


46/71

46 |P a g e

Co2 Extinguisher UPG no. 621516

A device for suppressing fire, consisting of a steel cylinder

containing compressed carbon dioxide, which may be released by

pressing on a handle. The release of the gas is usually accomplished

through a hose attached to a funnel-shaped vent which is directed

at the base of the fire, and when released, part of the carbondioxide is chilled sufficiently to solidify into a powder

Rust free Aluminum cylinder

Rubber beading at the bottom of the extinguisher body

Anti-corrosive painting

Chrome Plated Brass valve

Stainless steel handle & lever

Temperature range: -30/+60 C

With wall bracket as standard

Strike-knob operation

Labeling in English

Wall Bracket

Easy refilling option

-UL Listed or FM

-BS EN 3

- NFPA 10

- Fire Class B & C

Bristol .

Angus .

Chubb ..


47/71

47 |P a g e

Trolley mounted Fire

Extinguisher(Foam)

UPG no. 621524

Its a portable Extinguisher that can access to places with a high

amount of capacity.

Stainless Steel SS 316 or 304 Cylinder with AFFF Foam

Nitrogen propellant in a separate Chrome molybdenum

carbon cylinder; Anti corrosive painting

5 m Long EPDM rubber flexible hose

Wrapped support & cylinder base with rubber beading to

avoid corrosion

Rubber tires with easy Maneuverability

- BS EN 1866

- Fire Class A & BBristol .

Angus .

Chubb ..


48/71

48 |P a g e

Fire Blanket UPG no. 621545

A fire blanket is a safety device designed to extinguish small

incipient (starting) fires. It consists of a sheet of fire retardant

material which is placed over a fire in order to smother it.

Shall not ignite.

Suitable for Cooking Oil Fire.

Shall be electrical resistance.

Heavy duty, simply to use and shall be packed to fit.

Shall be fitted with flame proof handles & ensure the

blanket retains integrity.

-BS EN 1869

-LPC

Bristol .

Angus .

Chubb ..


49/71

49 |P a g e

COVERALLFIRE FIGHTER UPG no. 623509

Its a special coverall is a loose fitting garment covering the whole

body except for the head, hands and feet that has the ability to

resist the heat radiation.

The garment shall be durable, light weight and shall be

supplied with ADCO logos, UAE flags, Fire service logos, Ranks

Logos and reflective strips.

-Shall comply EN 1486

-The Fabric shall be Dupont latest NOMEX Delta-C.

PPE

DuPont .


50/71

50 |P a g e

T-shirt

Its a special shirt that can resist heat with high dry capacity

which is made of special material.

Cotton T shirt, with heat gear moisture transport system which

allows it to dry 5 X quicker than standard cotton. Loose fit for

full range of motion and ribbed collar. Lightweight 4 way

stretch construction to allow for mobility and durability.

Underarmour .


51/71

51 |P a g e

Fire Fighters Jacket

A turnout coat is the type of jacket typically worn by

firefighters. Oversized pockets allow for carrying tools and

equipment, and reflective safety stripes ensure that

firefighters remain visible to each other. Protective coats will

usually have Velcro or zipper functions which will enable a

firefighter to properly and efficiently don this piece of gear.

This material must be windproof and waterproof. Cuffs will

be made of Nomex.

Additional reinforcement on the elbows is required as a

minimum.

Hooks or pockets for radio storage. Silver Reflective strip to

be applied to arms and main jacket. UAE Flag and left arm &

ADCO logo

-Shall comply EN 469 & EN 1486

-Shall Comply NFPA 1971

Lion Apparel .

Cosalt

Bristol Uniforms .


52/71

52 |P a g e

Fire Fighters Trousers

Trousers will be the first article of clothing that a firefighter

will usually wear. Suspenders worn with the turnout trousers

should be the heavy duty type in order to stand up against

such heavy weights and rigorous activities they will face

This material must be windproof and waterproof.

Silver Reflective strip to be applied to legs

Adjustable elastic straps for fixing the waistband individually. Two

sides pockets with flap.



Lion Apparel .

Cosalt

Bristol Uniforms .


53/71

53 |P a g e

Fire Fighters Flash Hood

When helmets do not provide built-in protection for the ears,

neck and part of the face a protective firefighting hood is

worn by firefighters. These are fitted and designed to protect

the firefighters ears, neck, and the parts of his face which are

not protected by the SCBA mask.

It must be compatible with Face mask



Lion Apparel .

Cosalt

Bristol Uniforms .


54/71

54 |P a g e

Structural Fire Fighters Gloves UPG no. 623513

Gloves that are used during firefighting.

Must offer resistance to heat, liquid chemicals, water and

Man Made Fibers

Additional protection must be provided on the palms and

fingers. Cuffs to make of Nomex/ High polymer Kevlar and

entire glove should be completed with Nomex stitching. The

interlining should offer protection from blood borne

pathogens.

- EN 659:2003. - NFPA 1971

Lion Apparel .

Cosalt

Bristol Uniforms .


55/71

55 |P a g e

Structural Fire Fighters

Extrication Gloves

UPG no. 623513

Extrication gloves are heavy duty work gloves are designed

for use by first responders. These gloves provide lots of

protection for the hands while also permitting manual

dexterity, allowing the user a full range of motion so that he

or she can assist with extrication procedures.

These gloves must offer hand protection for emergency

rescue and extreme works

Additional protection must be provided on palms, knuckles

and fingers. This reinforcement should be made of High

strength polymer.

- EN 388:2003

-NFPA 1971

Rosenbauer .

Cosalt .

Bristol Uniforms .


56/71

56 |P a g e

Fire Fighters Helmet UPG no. 623518

Firefighters helmets are made from tough fiberglass are

heatproof and worn when firefighting or carrying out rescue

work. A fire helmet protects the firefighters head from

falling objects or banging their head on low beams.

The Helmet is to be a TYPE B/3b full shell and must meet EN

443:2008.

It must include an integral lamp system. Cradle and three

points chin strap. Two visors, one large face shield tinted

Inner eye protector with tinted, comply EN14458:2004.

The helmet must be available in white (officers) and yellow

(fire fighters).

-EN 443:2003

-NFPA 1971

Rosenbauer .


57/71

57 |P a g e

Fire Fighters Protective Fire Boots

with Twister Mechanism

UPG no. 623511

Firefighter turnout boots are usually sized as a regular shoe,

but are made of rubber or leather with a Boron Steel toe

insert. The boots are slipped inside the legs of the trousers to

maintain a barrier from the heat given off by the fire. When

the trousers and boots are not being actively used, the

trousers will fold down and out around the shins of the boots,

ready for quick access for the firefighter.

The boots are to be constructed of leather and must offer ahigh level of protection while remaining lightweight.

These boots must have toe and ankle protection and be

provided with a pull tab.

The outsole must be fuel oil and provide a high level of

electrical resistance.

The boots securing mechanism is through a tear proof steel

cord called a TWISTER mechanism.

-EN 15090:2006

-NFPA 1971

Rosenbauer .


58/71

58 |P a g e

High Visibility Tabbards

A type of personal protective equipment (PPE), is any

clothing worn that has highly reflective properties or a color

that is easily discernible from any background. Yellow

waistcoats worn by emergency services are a common

example.

High Visibility Tabbards / Vests with Fire and Rescue wording

on back.

To have silver luminous strips on front and rear of Vest. To

have Velcro fasteners

-EN 471


59/71

59 |P a g e

Chemical Protection Suit

Is a piece of personal protective equipment that consists of

an impermeable whole-body garment worn as protection

against hazardous materials. Such suits are often combined

with self-contained breathing apparatus (SCBA) to ensure a

supply of breathable air. Hazmat suits are mostly used by

firefighters, researchers, personnel responding to toxic spills,

specialists cleaning up contaminated facilities and workers in

toxic environments.

Suit shall be skin vapor protective garment that meets and/or

exceeds performance requirements including the flammability

and abrasion resistance tests.

-EN 943-1

-NFPA 1991 & NFPA 1992

Trellchem .

Rosenbauer .

MSA .


60/71

60 |P a g e

Light Weight Life Jacket UPG no. 623545

A lifejacket is a type of personal flotation device designed to

keep a person's airway clear of the water whether the

wearer is conscious or unconscious. They are either made

from two layers of bonded polyurethane to be inflated or

from foam.

Inflation occurs upon contact with water by means of a CO2

cartridge or by manual release with the toggle fastening.

Life Jacket must be lightweight and easy to carry and store.

Outfitting: Weld together air balloon with automatic-

release, oral inflation tube, strong holder with snaps,

variably adjusted waist belt with insert buckle.

-EN 396:1996.


61/71

61 |P a g e

Cooling Vest

A cooling vest or ice vest or "precool vest" is a piece of

equipment worn to cool a person down. Cooling vests are

used by many athletes, industry workers, doctors, working

dogs, people with Multiple Sclerosis or Hypohidrotic

ectodermal dysplasia, and by military pilots and tank crews.

This cool vest must be lightweight and weigh no more than

1.6kg. It must provide cooling effects for 90 minutes in a 60

degree C environment. It must be suitable to wear under

garments and not restrict fire fighters movement while

wearing SCBA. NOTE this must be a COOLING VEST and utilize

Phase change materials as its elements and not a gel that

freezes when placed in a freezer.

TST .


62/71

62 |P a g e

Showers & Eyebaths


63/71

63 |P a g e

Eye Bath UPG no. 625505

MESC no. 9664181209

An emergency station for washing eyes in case of getting

contaminated by chemical substances.

Eye wash station with gravity of high impact polyethylene

construction equipped with wall mounting bracket.

-ANSI Standards Z358.1.-2009.

Showers & Eyebaths

EYESALINEPORTASTREAM I,

Eye WASH unit.

FENDALL .


64/71

64 |P a g e

Emergency Safety Shower UPG no. 625510MESC no. 9664695109

An emergency shower, usually placed in near labs or

chemical ware-house, washes all the body in case of any

contamination by any chemical or hazard substances.

Eye, face and body wash system, all stainless steel

construction c/w stay-open ball valves, actuator pull rod,

push plate and foot treadle for eye/face wash activation,

pop-off eye-wash dust emergency sign.

-ANSI Z 358.1 - 2009

HUGHES Emergency shower Model STD -J-14D.

HUGHES Emergency shower model STD -20 E.

Showers & Eyebaths Co. GFTS-15 ( tank shower )

GFS-3F ( Free Standing

Shower )


65/71

65 |P a g e


66/71

66 |P a g e

SAFETY TORCH - FLASH LIGHT UPG no. 625520MESC no. 6955301091

A flashlight is a hand-held portable electric-

powered light source. Usually the light source is a

small incandescent light bulb or light-emitting

diode (LED).

Safety torch, suitable for hazardous and explosive

atmosphere having toughened glass, body with

anti-static properties, concealed switch and instant

circuit breaker which separates bulb from battery in

accidental breakage of the lamp.

-BASEEFA or equivalent.

Miscellaneous

Bright Star, USA, No. 2324C

Chloride Standby - Type BM 66S, 3 CELL

Cont. CEAG-DOMINIT Type STABEX

SHIMWELL ALEXANDER Type S.A. 622.

SURVIVOR Mdel SL-90X Stream light

LITE-BOX Mdel SL-40X Stream light

FLASH LIGHT - UK ..


67/71

67 |P a g e

WRITE-ON LABEL UPG no. 625520MESC no. 9602909753

Tags inform employees that equipment has been inspected and is

safe and in working order.

Write-on labels "inspected by" for Fire extinguishers scheduled

inspection purpose.

TRAFFIC LAMP UPG no. 625525MESC no. 9664731099

Traffic lights, also known as traffic lamps, signaling devices

positioned at road intersections, pedestrian crossings and other

locations to control competing flows of traffic

Traffic lamp with rechargeable batteries in flame proof housing for

at least 12 hours operation.


RS Ref No. 505-870


68/71

68 |P a g e

TRAFFIC CONES UPG no. 625525MESC no. 9664731099

Traffic cones, also called safety cones are usually cone-shaped

markers that are placed on roads or footpaths to temporarily

redirect traffic in a safe manner.

Made out of fluorescent PVC material orange/red color with

black base to warn traffic of hazards and obstructions.

WIND SOCK UPG no. 625540MESC no. 9515762109

A windsock is a conical textile tube designed to indicate wind

direction and relative wind speed. Windsocks typically are used

at work locations where there is risk of gaseous leakage.

ACCLESSEYE Self - illuminant Delineator Model

No. ASR - 108-WY (White and Yellow)

NAVIGATOR Road cones PartBS 873 D2 or equivalent.


69/71

69 |P a g e

Wind sock made out of strong hypalon/vinyl coated nylon fabric

cone, open at both ends for indicating wind direction, in

fluorescent orange color. Size: 8 Feet Long,, 36" Dia Throat

(Large) End, 18" Dia Tail End.

BREATHING APPARATUS

CLEANER / SANITIZER

UPG no. 625520

MESC no. 9658209103

Cleaner is a piece of treated cloth for the manual

cleaning of breathing apparatus and chemical

protection suits before the disinfection. The agent

offers a very high cleaning power and compatibility of

materials.

Disposable cloths, Disinfectant cleaner for all the

rubber parts of Breathing Apparatus.

Mc Master Carr - USA Part No. 3908 K53

MSA cleaner Sanitizer II (12 Nos.2 Oz pkgs in

carton). Part No. 34337

'GUARDLIGHT' THORN Type AT-7692.


70/71


71/71

approved hse and fire equipment (1)

Documents