aprilia rsv1000r s u p p l e m e n t a r y m a n u a l gipro x/gpx-u01... · 2020. 2. 5. ·...
TRANSCRIPT
Aprilia RSV1000R2004-2010
Remove the main seat.
Remove the right side fairing.
www.healtech-electronics.com
S U P P L E M E N T A R Y M A N U A Lfor GPX-U01
PAGE 1/3
Lift up or removethe fuel tank.
Aprilia RSV1000R2004-2010
Locate the speed sensor connector.
Route the GPX cable through the top opening of the
dust boot.
Connect GPX white wire to gray/white wire of speed sensor
connector.(transparent, 3-pole connector in dust boot
behind water resorvoir tank)
www.healtech-electronics.com PAGE 2/3
Connect GPX red wire tored wire of speed sensor
connector.(transparent, 3-pole connector in dust boot
behind water resorvoir tank)
Aprilia RSV1000R2004-2010
www.healtech-electronics.com PAGE 3/3
Typical position for thegear indicator.
Connect GPX green wire to blue/yellow wire of Camshaft
Position Sensor connector.(black, 3-pole connector
on cylinder head at the left)
Connect GPX black wire toblue/orange wire of
speed sensor connector.(transparent, 3-pole connector in dust boot
behind water resorvoir tank)