Aquence Autophoretic

866 Series Coating Products

TM

Product Benefits & Features Environmentally friendly no toxic heavy

metals, VOCs or HAPs

Lower maintenance requirements noultrafiltration, no rectifiers, no electrodes, fewerstages

Numerous process/application advantages: Unlimited throwing (wetting)

power with uniform coverage Coats fully assembled parts Inside and outside part protection No electrical contacts required No special rack stripping required Lower disposal and energy costs Lower applied costs

Excellent properties: Good cyclic corrosion protection A flexible film with high impact resistance Scratch and mar resistance Uniform low gloss appearance

AquenceTM Autophoretic 866 Series is Henkels thirdgeneration autodeposition coating technology. This water-basedorganic barrier coating efficiently and uniformly coats metalparts without the complicated equipment requirements foranodes, rectifiers, or additional production maintenance stepsneeded with conventional industrial coatings.

The performance, application, and process benefits translateinto a more flexible supply chain with lower total cost. Thatswhy Autophoretic is The Smart Coating Solution.

Henkel CorporationMadison Heights, MIU.S.A.866.332.7024www.aquencecoatings.comwww.henkelna.com/automotiveemail: a.coat@us.henkel.com

and designate trademarks of Henkel Corporation or its Affiliates. = registered in the U.S. Patent &Trademark Office. Henkel Corporation, 2008. All rights reserved. 4764/LT4947 (01/08)

Product Line SupportHenkels AquenceTM Autophoretic team is madeup of chemists, engineers, application specialists,and pilot plant facilities that can assist you in theevaluation, design, and installation ofautodeposition coating processes. For moreinformation please contact the Henkel AquenceTM

Autophoretic Coatings Group at (866) 332-7024in the U.S., (905) 814-6511 in Canada, or visitwww.aquencecoatings.com.

Autodeposition Application BenefitsCompared to conventional coating operations, autodeposition requires significantly less manpower and equipment less

cycle time, energy, part rework, handling, packaging, andtransportation

is self-limiting cannot be over applied provides uniform coating thickness on all part surfaces,

including edges and complex shapes

The AquenceTM Autophoretic 866 coating can positively impact your entire manufacturing process. The absence of electric current from the coating application process, shorterprocess cycle time, and low curing temperature of the coatingresult in lower energy consumption. The low pH environment of the coating bath discourages bacterial growth, and the absence of metal phosphating reduces time and expense inchemical maintenance and waste treatment. Coating totallyassembled parts with AquenceTM Autophoretic 866 reducesmanufacturing process cycle time, work-in-process inventory,logistics for in-process transport, and labor for material handling.

Application Information Application Equipment: Autodeposition Coatings are applied

with common industrial cleaning methods followed by a 3-stepimmersion coating process using hoist or conveyor systems.

Bake: The typical bake for ACC 866 is a single-zone oven at20 minutes at 210F-220F (100C-110C) metal temperature.

VOC: The Calculated Value minus water is Zero based on U.S.EPA Method 24. There are no co-solvents added to the ACC

866 coating during production. Hazardous Air Pollutants: None. Hazardous Heavy Metals: None in coating or process

chemistry. A Henkel representative can assist you in the evaluation of

products, process parameters, and cure schedule.

TESTAquenceTM

Autophoretic 866

RESIN TYPE PVDC

FILM THICKNESS (MILS) 0.5 1.0 (12 - 25 )

1MM CROSS HATCH ADHESION NO FAILURE

GLOSS @ 60 5 10

PENCIL HARDNESS 4H 7H

T- BEND FLEXIBILITY TEST 0T

REVERSE IMPACT 120 160 IN-LBS.

SOLVENT RESISTANCE (MEK ) 100+ MEK-DR

OPERATING TEMPERATURERESISTANCE**