ar-mu1 laser printer options ar-d13 · ar-d13/d14/mu1/dc1 product outline, configuration-1 [1]...
TRANSCRIPT
This document has been published to be used forafter sales service only.The contents are subject to change without notice.
Parts marked with “ “ are important for maintaining the safety of the set.
Be sure to replace these parts with specified ones for maintaining the safety and performance of the set.
SHARP CORPORATION
LASER PRINTER OPTIONSPAPER FEED UNITOPTIONAL POWER SUPPLY UNIT
AR-D13AR-D14AR-MU1
MODEL AR-DC1
CODE : 00ZARD13//A1E
[1] PRODUCT OUTLINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1
[2] CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 1
[3] SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 1
[4] UNPACKING AND INSTALLATION. . . . . . . . . . . . . . . . . . . . . . 4 - 1
[5] EXTERNAL VIEWS AND INTERNAL STRUCTURES . . . . . . . 5 - 1
[6] ADJUSTMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 1
[7] DISASSEMBLY AND ASSEMBLY, MAINTENANCE. . . . . . . . . 7 - 1
[8] BLOCK DIAGRAM, WIRING DIAGRAM. . . . . . . . . . . . . . . . . . 8 - 1
[9] OTHERS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 1
CONTENTS
AR-MU1
AR-D13
AR-DC1
AR-D14
AR-D13/D14/MU1/DC1 PRODUCT OUTLINE, CONFIGURATION-1
[1] PRODUCT OUTLINE
This unit is installed to one of the following machines to serve as a duplex module. When installing the unit to one of the following machines, one of the multi-purpose tray (AR-MU1), the large capacity paper feed desk (AR-D13), andthe 3-stage paper feed desk (AR-D14) must be installed in advance. For the AR-D13 and the AR-D14, the option power unit (AR-DC1) must beinstalled together.
[2] CONFIGURATION
1. For the AR-D13 and the AR-D14, the option power unit (AR-DC1) must be installed together. 2. When the AR-MU1 and the male bin stacker (AR-MS1) or the finisher (AR-FN5) are installed, the optional power unit (AR-DC1) must be installed
together. 3. The AR-MU1 cannot be installed together with the saddle finisher (AR-FN)/Scanner unit (AR-EF1/EF2).
Applicable models AR-P350 / P450, AR-M350 / M450DM-3500 / 3501 / 4500 / 4501, DM-3551 / 4551
AR-D14
AR-FN7
AR-MU1
AR-D13
AR-EF1/AR-EF2
AR-FN6
AR-MS1
AR-DC1
Related to paper feed unit
AR-MU1
AR-D14
AR-D13
Sca
nner
rac
k
Multi purpose drawer
Stand/3 x 500 sheet paper drawer
Stand/MPD & 2000 sheet paper drawer
Mul
ti pu
rpos
e dr
awer
Sta
nd/3
x 5
00 s
heet
pap
er d
raw
er
Sta
nd/M
PD
& 2
000
shee
t
Dup
lex
mod
ule/
bypa
ss tr
ay
Dup
lex
mod
ule
B/W
sca
nner
mod
ule/
DS
PF
Sad
dle
stitc
h fin
ishe
r
Fin
ishe
r
Mai
l-bin
sta
cker
Exi
t tra
y
Pun
ch u
nit
PS
3 ex
pans
ion
kit
Facs
imile
exp
ansi
on k
it
Pri
nt s
erve
r ca
rd
Har
d di
sk d
rive
Pow
er s
uppl
y un
it
Upp
er e
xit t
ray
exte
nsio
n
Mul
ti-fu
nctio
n co
ntro
ller
boar
d
Fax
mem
ory
(8 M
B)
Net
wor
k sc
anne
r exp
ansi
on k
it
AR-D13/D14/MU1/DC1 SPECIFICATIONS-1
[3] SPECIFICATIONS
1. AR-D13
2. AR-D14
AR-D13
Type Stand MPD&2000 Sheet Paper Drawer(large capacity tray + multi purpose drawer)
Transport speed To support 35-45 sheet/minute
Transport alignment Center alignment
Paper size 1 Tray A3, B4, A4, A4R, B5, B5R, A5R11"x17", 8.5"x14", 8.5"x13", 8.5"x11", 8.5"x11"R, 5.5"x8.5"RExecutive, Japanese p/c, Monarch(envelope)Com-10(envelope), DL(envelope), C5(envelope), ISO B5(envelope)
2 Tray A4, 8.5"x11"
How to change the paper size
Guide adjustment by user / Software setting by user
Factory default paper size setting
8.5"x11"
Media available for paper feeding
1 Tray Plain paper:60-128g/m² / 16-34lbs
Index paper:176g/m² / 47lbs
Cover paper:200-205g/m² / 54-55lbs
Envelope:75-90g/m², 20-24lbs
Transparency film:(TBD)
* Media heavier than 105g/m² should be A4/8.5x11" or smaller. Media heavier than 120g/m² should be fed from shorter edge. * Only single paper feed is enabled for overlay copy or copy on back-side of printed paper.
2 Tray Size guide plate comes with LCC unit.Plain 60-105g/m² / 16-28lbs
Paper capacity
1 Tray Standard:500sheets(80g/m²) Post card:40sheets Envelope:40sheets Transparency film:40sheets
2 Tray 880+1,320sheets(64g/m²) / 800+1,200sheets(80g/m²)
Paper type 1 Tray Plain, recycled, pre-printed, pre-punched, color, letter head, labels, heavy, transparency, Japanese p/c, envelope(User can set bi-type for each of the above paper type.)
2 Tray Plain, recycled, pre-printed, pre-punched, color, letter head(User can set bi-type for each of the above paper type.)
Sizes to be detected
1 Tray AutomaticAuto-AB:A3, B4, A4, A4R, B5, B5R, 8.5"x13", A5R
AutomaticAuto-Inch:11"x17", 8.5"x14", 8.5"x11", 8.5"x11"R, 7.25"x10.5"R, 5.5" x 8.5R
Manual (input detection):postal card, Monarch(envelope),Com-10(envelope), DL(envelope), C5(envelope), ISO B5(envelope)
Ignore detection selectable:
2 Tray Size setting by the serviceman
Paper balance detection Provided (paper empty and 6 steps)
Paper loading system To be loaded from the upper side with front loading system
Tray ascent/descent time
Ascent Within 12 seconds
At paper empty, required time from tray insert to the empty detection
Descent Own weight descent
Dehumidification heater Not provided
Power consumption 32.2W or lower
Power source Supplied from main unit (DC24V 1.3A / DC5V 0.2A)
External dimensions 585x530x404 (mm)
Occupied dimensions
Weight Approx. 35kg
AR-D14
Type Stand /3x500 Sheet Paper Drawer (2 paper trays + 1 multi purpose drawer)
Transport speed To support 35-45 sheet/minute
Transport alignment Center alignment
Paper size 1 Tray A3, B4, A4, A4R, B5, B5R, A5R11"x17", 8.5"x14", 8.5"x13", 8.5"x11", 8.5"x11"R, 5.5"x8.5"RExecutive, Japanese p/c,Monarch(envelope)Com-10(envelope), DL(envelope), C5(envelope), ISO B5(envelope)
2 or 3 Tray
A3, B4, A4, A4R, B5, B5R11"x17", 8.5"x14", 8.5"x13", 8.5"x11", 8.5"x11"R, 7.25"x10.5"R
How to change the paper size
Unit is delivered with paper guide set at max. position in width. (Both of two cassettes.)
Factory default paper size setting
To be set to maximum paper guide width at factory default status (for both trays)
Media available for paper feeding
1 Tray Plain paper:60-128g/m² / 16-34lbs
Index paper:176g/m² / 47lbs
Cover paper:200-205g/m² / 54-55lbs
Envelope:75-90g/m², 20-24lbs
Transparency film:(TBD)
Media available for paper feeding
1 Tray * Media heavier than 105g/m² should be A4/8.5x11" or smaller. Media heavier than 120g/m² should be fed from shorter edge. * Only single paper feed is enabled for overlay copy or copy on back-side of printed paper.
2 or 3 Tray
Plain 60-105g/m² / 16-28lbs
Paper capacity
1 Tray Standard:500sheets(80g/m²) Post card:40sheets Envelope:40sheets Transparency film:40sheets
2 or 3 Tray
Standardpaper:500sheets X 2(64g/m²)
Paper type 1 Tray Plain, recycled, pre-printed, pre-punched, color, letter head, labels, heavy, transparency, Japanese p/c, envelope(User can set bi-type for each of the above paper type.)
2 or 3 Tray
Plain, recycled, pre-printed, pre-punched, color, letter head(User can set bi-type for each of the above paper type.)
AR-D13
AR-D13/D14/MU1/DC1 SPECIFICATIONS-2
3. AR-MU1
4. AR-DC1
Sizes to be detected
1 Tray AutomaticAuto-AB:A3, B4, A4, A4R, B5, B5R, 8.5"x13", A5R
AutomaticAuto-Inch:11"x17", 8.5"x14", 8.5"x11", 8.5"x11"R, 7.25"x10.5"R, 5.5" x 8.5R
Manual (input detection):postal card, Monarch(envelope),Com-10(envelope), DL(envelope), C5(envelope), ISO B5(envelope)
Ignore detection selectable:
2 or 3 Tray
Automatic detection-AB(200V system):A3, B4, A4, A4R, B5, B5R,8.5"x13"
Automatic detection-inch(100V system): 11"x17", 8.5"x14", 8.5"x13", 8.5"x11", 8.5"x11"R, 7.25"x10.5"R
Paper balance detection Provided (paper empty and 3 steps)
Paper loading system To be loaded from the upper side with front loading system
Tray ascent/descent time
Ascent Within 7 seconds
At paper empty, required time from tray insert to the empty detection
Descent Own weight descent
Dehumidification heater Included in the service kit.
Power consumption 32.2W or lower
Power source Supplied from main unit(DC24V 1.3A / DC5V 0.2A)
External dimensions 585x530x404 (mm)
Occupied dimensions
Weight Approx. 32kg
AR-D14
AR-MU1
Type Multi purpose drawer for add-on use
Transport speed To support 35-55 sheets/minute
Transport alignment Center alignment
Paper size A3, B4, A4, A4R, B5, B5R, A5R11"x17", 8.5"x14", 8.5"x13", 8.5"x11", 8.5"x11"R, 5.5"x8.5"RExecutive, Japanese p/c, Monarch(envelope)Com-10(envelope), DL(envelope), C5(envelope), ISO B5(envelope)
How to change the paper size
Guide adjustment by user / Software setting by user
Factory default paper size setting
To be set to maximum paper guide width at factory default status.
Media available for paper feeding
Plain paper:60-128g/m² / 16-34lbs
Index paper:176g/m² / 47lbs
Cover paper:200-205g/m² / 54-55lbs
Envelope:75-90g/m², 20-24lbs
Transparency film:(TBD)
* Media heavier than 105g/m² should be A4/8.5x11" or smaller. Media heavier than 120g/m² should be fed from shorter edge. * Only single paper feed is enabled for overlay copy or copy on back-side of printed paper.
Paper capacity Standard:500sheets(80g/m²) Post card:40sheets Envelope:40sheets Transparency film:40sheets
Paper type Plain, recycled, pre-printed, pre-punched, color, letter head, labels, heavy, transparency, Japanese p/c, envelope(User can set bi-type for each of the above paper type.)
Sizes to be detected AutomaticAuto-AB:A3, B4, A4, A4R, B5, B5R, 8.5"x13", A5R
AutomaticAuto-Inch:11"x17", 8.5"x14", 8.5"x11", 8.5"x11"R, 7.25"x10.5"R, 5.5" x 8.5R
Manual (input detection):postal card, Monarch(envelope),Com-10(envelope), DL(envelope), C5(envelope), ISO B5(envelope)
Ignore detection selectable:
Paper balance detection Provided (paper empty and 3 steps)
Paper loading system To be loaded from the upper side with front loading system
Tray ascent/descent time
Ascent Within 7 seconds
At paper empty, required time from tray insert to the empty detection
Descent Own weight descent
Dehumidification heater Included in the service kit.
Power consumption 24.5W or lower
Power source Supplied from main unit (DC24V 1A / DC5V 0.1A)
External dimensions 585x530x114 (mm)
Occupied dimensions
Weight Approx. 11kg
Input AC 100-127V / 220-240V (Two kinds)Output DC 24V
AR-D13/D14/MU1/DC1 UNPACKING AND INSTALLATION-1
[4] UNPACKING AND INSTALLATION
1.AR-D13<Before installation>
•For installation, a power supply unit (AR-DC1) is needed.
1) Turn off the main switch of the main unit of the printer.Turn the main switch located on the front side of the printer to the"OFF" position.Then remove the power plug from the outlet.
2) Attach the adjusters and adjust them.<1>Insert the left adjusters to the stand/paper drawer.<2>Turn the five adjusters to lower them until they touch the floor.<3>Attach the four adjuster covers.
3) Put the main unit of the printer on the stand/paper drawer.<1>Pull out the paper tray of the main unit until it stops and then remove
it by lifting both ends of the tray.
<2>Hold the main unit of the printer at the positions shown in the illustration and put the main unit on the stand/paper drawer so that the front side and the left side of the main unit are aligned to those of the stand/paper drawer.
4) Connect the main unit to the stand/paper drawer.<1>Attach the rear mounting plates with two supplied screws.
<2>Pull out the upper paper tray of the stand/paper drawer until it stops and attach the front mounting plates with two supplied screws.Then, remove the lock of the paper tray and close the tray.
<3>Reattach the paper tray of the main unit.
<Parts included>
Left adjuster: 1 pc.
Front mounting plates: 2 pcs.
Rear mounting plates: 2 pcs.
Adjuster covers: 4 pcs.
Screws: 4 pcs.
Left paper guides: 2 pcs. Right paper guides: 2 pcs.
"OFF"
3
3
3
2
2
2
21
3
Front side
Rear side
Rear mounting plate
Rearmounting plate
ScrewScrew
Screw
Screw
Frontmounting plate
Front mountingplate
AR-D13/D14/MU1/DC1 UNPACKING AND INSTALLATION-2
5) Remove the rear cabinet of the stand/paper drawer and remove theAC inlet cover.
<1>Remove the four screws that fix the rear cabinet and then remove the rear cabinet.
<2>Remove the screw that fixes the AC inlet cover and then remove the AC inlet cover.
<3>Process the AC inlet cover as shown in the illustration.
6) Attach the power supply unit.Attach the power supply unit to the positioning portion of the multipurpose drawer and then fix it with three supplied screws.
7) Connect the power supply unit harness to the PCU PWB of the mainunit of the printer.
<1>Remove the screw that fixes the harness cover of the main unit of the printer and slide the harness cover up to remove it.Process the harness cover as shown in the illustration.
<2>Connect the optional power supply harness connector to CN11 (red connector) of the PCU PWB of the main unit of the printer.
<3>Reattach the harness cover to its original position and fix it with the removed screw.At this time, ensure that the optional power supply harness are arranged as shown in the illustration.
•Fix the harness securely to the wire saddle.
8) Connect the relay harness of the stand/paper drawer to the powersupply unit.Connect the relay harness of the stand/paper drawer to theconnector of the power supply unit.
9) Attach the rear cabinet of the stand/paper drawer.<1>Pass the cord of the power supply unit through the hole of the rear
cabinet and attach the rear cabinet to the stand/paper drawer.
Rear cabinet
AC inlet cover
Cut out.
Power supply unitScrews
Screws
Harness cover
Cut out.
Screw
Connector
CN11
Wire saddle
Harness cover
Optional powersupply harness2/ Screw
Screw
Wire saddle
Connector of the power supply connector
Relay harness of thestand/paper drawer
Rear cabinet
AR-D13/D14/MU1/DC1 UNPACKING AND INSTALLATION-3
<2>Attach the AC inlet cover to the rear cabinet of the stand/paper drawer and fix it with the removed screw.
10) Connect the AC cord of the power supply unit to the main unit of theprinter.Connect the AC cord of the power supply unit to the inlet connectorof the main unit of the printer at the location shown in the illustration.
11) Attach the paper guides to the lower tray (large capacity tray) and setthe size.Refer to "Setting and adjustment" described later.
12) Adjust the position of the paper guides of the upper paper tray of thestand/paper drawer.Refer to "Setting and adjustment" described later.
2.AR-D14<Before installation>
•For installation, a power supply unit (AR-DC1) is needed.
1) Turn off the main switch of the main unit of the printer.Turn the main switch located on the front side of the printer to the"OFF" position.Then remove the power plug from the outlet.
2) Attach the adjusters and adjust them.<1>Insert the left adjusters to the stand/paper drawer.<2>Turn the five adjusters to lower them until they touch the floor.
<3>Attach the four adjuster covers.
3) Put the main unit of the printer on the stand/paper drawer.<1>Pull out the paper tray of the main unit until it stops and then remove
it by lifting both ends of the tray.
<2>Hold the main unit of the printer at the positions shown in the illustration and put the main unit on the stand/paper drawer so that the front side and the left side of the main unit are aligned to those of the stand/paper drawer.
4) Connect the main unit to the stand/paper drawer.<1>Attach the rear mounting plates with two supplied screws.
Screw
AC inlet cover
AC cord
<Parts included>
Left adjuster: 1 pc.
Front mounting plates: 2 pcs.
Rear mounting plates: 2 pcs.
Adjuster covers: 4 pcs.
Screws: 4 pcs.
"OFF"
3
3
3
3
2
2
2
2
1
Front side
Rear side
Rear mounting plate
Rearmounting plate
ScrewScrew
AR-D13/D14/MU1/DC1 UNPACKING AND INSTALLATION-4
<2>Pull out the upper paper tray of the stand/paper drawer until it stops and attach the front mounting plates with two supplied screws.Then, remove the lock of the paper tray and close the tray.Remove the locks of the middle tray and the lower tray similarly.
<3>Reattach the paper tray of the main unit.
5) Remove the rear cabinet of the stand/paper drawer and remove theAC inlet cover.
<1>Remove the four screws that fix the rear cabinet and then remove the rear cabinet.
<2>Remove the screw that fixes the AC inlet cover and then remove the AC inlet cover.
<3>Process the AC inlet cover as shown in the illustration.
6) Attach the power supply unit.Attach the power supply unit to the positioning portion of the multipurpose drawer and then fix it with three supplied screws.
7) Connect the power supply unit harness to the PCU PWB of the mainunit of the printer.
<1>Remove the screw that fixes the harness cover of the main unit of the printer and slide the harness cover up to remove it.Process the harness cover as shown in the illustration.
<2>Connect the optional power supply harness connector to CN11 (red connector) of the PCU PWB of the main unit of the printer.
<3>Reattach the harness cover to its original position and fix it with the removed screw.At this time, ensure that the optional power supply unit harness is arranged as shown in the illustration.
•Fix the harness securely to the wire saddle.
Screw
Screw
Frontmounting plate
Front mountingplate
Rear cabinet
AC inlet cover
Cut out.
Power supply unitScrews
Screws
Harness cover
Cut out.
Screw
Connector
CN11
Wire saddle
Harness cover
Optional power supply harness
Screw
Wire saddle
AR-D13/D14/MU1/DC1 UNPACKING AND INSTALLATION-5
8) Connect the relay harness of the stand/paper drawer to the powersupply unit.Connect the relay harness of the stand/paper drawer to theconnector of the power supply unit.
9) Attach the rear cabinet of the stand/paper drawer.<1>Pass the cord of the power supply unit through the hole of the rear
cabinet and attach the rear cabinet to the stand/paper drawer.
<2>Attach the AC inlet cover to the rear cabinet of the stand/paper drawer and fix it with the removed screw.
10) Connect the AC cord of the power supply unit to the main unit of theprinter.Connect the AC cord of the power supply unit to the inlet connectorof the main unit of the printer at the location shown in the illustration.
11) Adjust the position of the paper guides of the upper paper tray of thestand/paper drawer.Refer to "Setting and adjustment" described later.
3.AR-MU1<Before installation>
•When installing AR-MS1, if you install a finisher or mail-bin stackertogether, a power supply unit (AR-DC1) is needed.
1) Turn off the main switch of the main unit of the printer.Turn the main switch located on the front side of the main unit to the"OFF" position.Then, remove the power plug of the main unit from the outlet.
2) Put the main unit of the printer on the multi purpose drawer.<1>Pull out the paper tray of the main unit until it stops and then remove
it by lifting both ends of the tray.
<2>Hold the main unit of the printer at the positions shown in the illustration and put the main unit on the multi purpose drawer so that the front side and the left side of the main unit are aligned to those of the multi purpose drawer.
3) Connect the main unit of the printer to the multi purpose drawer.<1>Attach the rear mounting plates with two supplied screws.
Connector of the power supply connector
Relay harness of thestand/paper drawer
Rear cabinet
Screw
AC inlet cover
AC cord
<Parts included>
Front mounting plates: 2 pcs. Rear mounting plates: 2 pcs. Screws: 4 pcs.
Front side
Rear side
Rear mounting plate
Rear mounting plate
Screw Screw
AR-D13/D14/MU1/DC1 UNPACKING AND INSTALLATION-6
<2>Pull out the paper tray of the multi purpose drawer until it stops and attach the front mounting plates with two supplied screws.Then, remove the lock of the paper tray and close the tray.
<3>Reattach the paper tray of the main unit of the printer.
4) Connect the harness to the main unit of the printer.<1>Remove the screw that fixes the harness cover of the main unit of the
printer and then slide the harness cover up to remove it.Process the harness cover as shown in the illustration.
<2>Connect the connector of the relay harness of the multi purpose drawer to the connector of the PCU PWB of the main unit of the printer.
If you do not install a finisher, saddle stitch finisher or mail-bin stacker,the steps below are not needed. Proceed to step 10).
5) Remove the rear cabinet of the multi purpose drawer.<1>Remove the two screws that fix the rear cabinet of the multi purpose
drawer and then remove the rear cabinet.
<2>Remove the screw that fixes the AC inlet cover and then remove the AC inlet cover.Process the AC inlet cover as shown in the illustration.
6) Attach the power supply unit.Attach the power supply unit to the positioning portion of the multipurpose drawer and then fix it with three supplied screws.
7) Connect the power supply unit harness to the PCU PWB of the mainunit of the printer.Connect the power supply harness connector to CN11 (redconnector) of the PCU PWB of the main unit of the printer.
Screw
Screw
Front mounting plate
Front mounting plate
Harness cover
Cut out.
Screw
Connector
Rear cabinet
Screw
Screw
AC inlet cover
Cut out.
Optional power supply unitScrews
Screws
CN11
Connector
AR-D13/D14/MU1/DC1 UNPACKING AND INSTALLATION-7
8) Attach the rear cabinet of the paper tray.<1>Pass the AC cord of the power supply unit as shown in the illustration
and attach the rear cabinet with two screws.
<2>Attach the AC inlet cover to the paper tray and fix it with the removed screw.
9) Connect the AC cord of the power supply unit to the main unit of theprinter.Connect the AC cord of the power supply unit to the inlet connectorof the main unit of the printer at the location shown in the illustration.Then, proceed to step 11).
10) Attach the harness cover.Reattach the harness cover to its original position and fix it with theremoved screw.At this time, ensure that the power supply unit harness is arrangedas shown in the illustration.
•Fix the harness securely to the wire saddle.
11) Adjust the position of the paper guides of the paper tray.Refer to "Setting and adjustment" described later.
4.AR-DC1<Before installation>
•Start installation after checking that the DATA indicator on the operationpanel is not lit or blinking.
1) Turn the main switch of the printer to "OFF".Turn the main switch located on the front of the printer to "OFF".Then, remove the power plug of the printer from the outlet.
2) Remove the multi rear cabinet.Remove the two screws that secure the multi rear cabinet andremove the multi rear cabinet.
3) Remove the AC inlet cover from the multi rear cabinet.Remove the screw that secures the AC inlet cover and remove theAC inlet cover.Work the AC inlet cover as shown in the illustration.
Rear cabinet
Screw
ScrewAC cord
Screw AC inlet cover
AC cord
Wire saddle
Harness cover
Screw
Optional power supply harnesses
Wire saddle
Parts included
Screws (3)
ACCESSORYI.T.E.9K11
"OFF"
Multi rear cabinet
Screw
Screw
AC inlet cover
Cut-out
AR-D13/D14/MU1/DC1 UNPACKING AND INSTALLATION-8
4) Attach an optional power supply unit to the multi-purpose section.Attach an optional power supply unit to the positioning portion of themulti-purpose section and secure it with the three screws included inthis product.
5) Connect the optional power supply harness to the PCU PWB of theprinter.
<1>Remove the screw that secures the harness cover of the printer and slide the harness cover upward to remove it.Work the harness cover as shown in the illustration.
<2>Connect the connector of the optional power supply harness to CN11 of the PCU PWB of the printer.
<3>Reattach the harness cover to its original position and secure it with the removed screw.At this time, check that wiring of the optional power supply harness has been handled as shown in the illustration.
6) Attach the multi rear cabinet.<1>Pass the AC cord of the optional power supply unit as shown in the
illustration and secure the multi rear cabinet with the two screws.
<2>Attach the AC inlet cover to the multi rear cabinet and secure it with the removed screw.
7) Connect the AC cord of the optional power supply unit to the printer.Connect the AC cord of the optional power supply unit to the positionof the inlet connector of the printer shown in the illustration.
8) Turn the power switch of the printer to "ON".Insert the power plug of the printer to the outlet.Then, turn the main switch located on the front of the printer to "ON".
Optional power supply unit Screw
Screws
Harness cover
Cut-out
Screw
Connector
CN11
Harness coverHarness cover
Screw
Optional powersupply harness
Multi rear cabinet
Screw
ScrewAC cord
Screw AC inlet cover
AC cord
"ON"
AR-D13/D14/MU1/DC1 EXTERNAL VIEWS AND INTERNAL STRUCTURES-1
[5] EXTERNAL VIEWS AND INTERNAL STRUCTURES
A. External view
B. Internal structure
(1) AR-D13
1 Multi-purpose tray (No. 2 tray) 2 No. 3 tray 3 No. 4 tray4 Large capacity tray 5 Desk left door
Code Name Function Remark
1 TPFD1
2 TPFD2
3 TPFD3
1
AR-DU13
5 4
AR-DU14
1
5 2
3
AR-MU1
15
1.TPFD1
2.TPFD2
3.TPFD3
AR-D13/D14/MU1/DC1 EXTERNAL VIEWS AND INTERNAL STRUCTURES-2
(2) AR-D14
(3) AR-MU1
Code Name Function Remark
1 DPFD1
2 DPFD2
3 DPFD3
Code Name Function Remark
1 MCPPD
1.DPFD1
2.DPFD2
3.DPFD3
1.MCPPD
AR-D13/D14/MU1/DC1 EXTERNAL VIEWS AND INTERNAL STRUCTURES-3
C. Motor, clutch
(1) AR-D13
Code Name Function Remark
1 TLUM1 Tandem tray 1 lift-up motor Tandem tray 1 lift-up
2 TPCL1 Tandem tray 1 paper feed clutch Clutch for paper feed from tandem tray 1
3 TPFCL LCC transport clutch Clutch for transport from LCC desk
4 MCLUM Multi-purpose tray lift-up motor Multi-purpose tray lift-up
5 MCPCL Multi-purpose paper feed clutch Clutch for paper feed from Multi-purpose tray
6 TMM LCC transport motor LCC desk paper transport
7 TPCL2 Tandem tray 2 paper feed clutch Clutch for paper feed from tandem tray 2
8 TLUM2 Tandem tray 2 lift-up motor Tandem tray 2 lift-up
3.TPFCL
4.MCLUM
5.MCPCL
6.TMM
7.TPCL2 8.TLUM2
2.TPCL1
1.TLUM1
AR-D13/D14/MU1/DC1 EXTERNAL VIEWS AND INTERNAL STRUCTURES-4
(2) AR-D14
(3) AR-MU1
Code Name Function Remark
1 DLUM2 No. 4 tray lift-up motor Gate switch between duplex and paper exit
2 DLUM1 No. 3 tray lift-up motor Cooling the machine and inside of ADU
3 DPFCL Desk transport clutch Clutch for transport from LCC desk
4 MCLUM Multi-purpose tray lift-up motor Multi-purpose tray lift-up
5 MCPCL Multi-purpose paper feed clutch Clutch for paper feed from Multi-purpose tray
6 DMM No. 3 tray desk transport motor No. 3 tray desk paper transport
7 DPCL2 No. 4 tray paper feed clutch Clutch for paper feed from tandem tray 2
8 DPCL1 No. 3 tray paper feed clutch Clutch for paper feed from tandem tray 1
Code Name Function Remark
1 MCFCL Multi-purpose tray transport clutch Multi-purpose tray transport clutch
2 MCLUM Multi-purpose tray lift-up motor Multi-purpose tray lift-up
3 MCPCL Multi-purpose paper feed clutch Clutch for paper feed from Multi-purpose tray
4 MCM Multi-purpose tray transport motor Multi-purpose tray paper transport
4.MCLUM
5.MCPCL6.DMM
3.DPFCL
2.DLUM1
1.DLUM2
8.DPCL1
7.DPCL2
2.MCLUM
3.MCPCL
4.MCM
1.MCFCL
AR-D13/D14/MU1/DC1 EXTERNAL VIEWS AND INTERNAL STRUCTURES-5
D. PWB, sensor
(1) AR-D13
Code Name Function Active condition Remark
1 TPFD2 Tandem tray paper transport sensor 2 Tandem tray paper transport detection L : Paper detected
2 TSPD1 Tandem 1 tray remaining paper quantity sensor
Tandem 1 tray remaining paper quantity detection
3 TDRS Side door open/close sensor Side door open/close detection H : Door closed
4 MCSPD MP tray remaining paper quantity sensor MP tray remaining paper quantity detection
5 TPFD3 Tandem tray paper transport sensor 3 Tandem tray paper transport detection L : Paper detected
6 MCLUD MP tray upper limit sensor MP tray upper limit detection H : Upper limit detected
7 MCSS1 MP tray rear edge sensor 1 MP tray rear edge size detection L : When pressed In MP tray rear edge size PWB
8 MCSS2 MP tray rear edge sensor 2 MP tray rear edge size detection L : When pressed In MP tray rear edge size PWB
9 MCSS3 MP tray rear edge sensor 3 MP tray rear edge size detection L : When pressed In MP tray rear edge size PWB
10 MCSS4 MP tray rear edge sensor 4 MP tray rear edge size detection L : When pressed In MP tray rear edge size PWB
11 TTSD Tandem tray open/close sensor Tandem tray open/close detection H : Tray closed
12 TLLD2 Tandem 2 tray upper limit sensor Tandem tray 2 upper limit detection L : Upper limit detected
13 TPED2 Tandem 2 tray paper empty sensor Tandem tray 2 paper empty detection H : Paper loaded
14 TSPD2 Tandem 2 tray remaining paper quantity sensor
Tandem 2 tray remaining paper quantity detection
15 MCPED MP tray paper empty sensor MP tray paper empty detection L : Paper loaded
16 TPFD1 Tandem tray paper transport sensor 1 Tandem tray paper transport detection L : Paper detected
17 MCPWS MP tray width sensor MP tray paper width detection Slide volume
18 Control PWB Control PWB Communication with the machine, machine operation control
19 TLLD1 Tandem 1 tray upper limit sensor Tandem tray 1 upper limit detection L : Upper limit detected
20 TPED1 Tandem 1 tray paper empty sensor Tandem tray 1 paper empty detection H : Paper loaded
21 MP tray rear edge size PWB
MP tray rear edge size PWB Multi-purpose tray rear edge size detection
3.TDRS
19.TLUD1
20.TPED1
12.TLUD2
13.TPED2
1.TPFD2
17.MCPWS 16.TPFD1
6.MCLUD
15.MCPED
5.TPFD3
2.TSPD1
4.MCSPD
11.TTSD
14.TSPD2
7.MCSS1
21.MP tray rear edge size PWB
8.MCSS2
10.MCSS49.MCSS3
18.
AR-D13/D14/MU1/DC1 EXTERNAL VIEWS AND INTERNAL STRUCTURES-6
(2) AR-D14
Code Name Function Active condition Remark
1 DDRS Side door open/close sensor Side door open/close detection H : Door closed
2 MCSPD MP tray remaining paper quantity sensor
MP tray remaining paper quantity detection
3 Control PWB Control PWB Communication with the machine, machine operation control
4 MCLUD MP tray upper limit sensor MP tray upper limit detection H : Upper limit detected
5 MCPED MP tray paper empty sensor MP tray paper empty detection L : Paper loaded
6 MDSS1 MP tray rear edge sensor 1 MP tray rear edge size detection L : When pressed In MP tray rear edge size PWB
7 MCSS2 MP tray rear edge sensor 2 MP tray rear edge size detection L : When pressed In MP tray rear edge size PWB
8 MCSS3 MP tray rear edge sensor 3 MP tray rear edge size detection L : When pressed In MP tray rear edge size PWB
9 MCSS4 MP tray rear edge sensor 4 MP tray rear edge size detection L : When pressed In MP tray rear edge size PWB
10 DCSS11 No. 3 tray rear edge sensor 1 No. 3 tray rear edge size detection L : When pressed In No. 3 tray rear edge size PWB
11 DCSS12 No. 3 tray rear edge sensor 2 No. 3 tray rear edge size detection L : When pressed In No. 3 tray rear edge size PWB
12 DCSS13 No. 3 tray rear edge sensor 3 No. 3 tray rear edge size detection L : When pressed In No. 3 tray rear edge size PWB
13 DCSS14 No. 3 tray rear edge sensor 4 No. 3 tray rear edge size detection L : When pressed In No. 3 tray rear edge size PWB
14 DCSS21 No. 4 tray rear edge sensor 1 No. 4 tray rear edge size detection L : When pressed In No. 4 tray rear edge size PWB
15 DCSS22 No. 4 tray rear edge sensor 2 No. 4 tray rear edge size detection L : When pressed In No. 4 tray rear edge size PWB
16 DCSS23 No. 4 tray rear edge sensor 3 No. 4 tray rear edge size detection L : When pressed In No. 4 tray rear edge size PWB
17 DCSS24 No. 4 tray rear edge sensor 4 No. 4 tray rear edge size detection L : When pressed In No. 4 tray rear edge size PWB
18 DPFD1 Desk paper transport sensor 1 Desk paper transport detection L : Paper detected
19 DPED1 N. 3 tray paper empty sensor N. 3 tray paper empty detection L : Paper loaded
20 DPFD2 Desk paper transport sensor 2 Desk paper transport detection L : Paper detected
21 DPFD3 Desk paper transport sensor 3 Desk paper transport detection L : Paper detected
22 DPED2 No. 4 tray paper empty sensor No. 4 tray paper empty detection L : Paper loaded
23 DLUD2 No. 4 tray upper limit sensor No. 4 tray upper limit detection H : Upper limit detected
24 MCPWS MP tray width sensor MP tray paper width detection Analog voltage Slide volume
25 DSPD2 No. 4 tray remaining paper quantity sensor
No. 4 tray remaining paper quantity detection
26 DLUD1 No. 3 tray upper limit sensor No. 3 tray upper limit detection H : Upper limit detected
27 DSPD1 No. 3 tray remaining paper quantity sensor
No. 3 tray remaining paper quantity detection
28 MP tray rear edge size PWB
MP tray rear edge size PWB MP tray rear edge size detection
29 No. 3 tray rear edge size PWB
No. 3 tray rear edge size PWB No. 3 tray rear edge size detection
30 No. 4 tray rear edge size PWB
No. 4 tray rear edge size PWB No. 4 tray rear edge size detection
10.DCSS11 11.DCSS12
13.DCSS1412.DCSS13
6.MCSS1
28.MP tray rear edge size PWB
29.No. 3 tray rear edge size PWB
30.No. 4 tray rear edge size PWB
7.MCSS2
9.MCSS48.MCSS3
14.DCSS21 15.DCSS22
17.DCSS2416.DCSS23
1.DDRS
27.DSPD1
2.MCSPD
25.DSPD2
24.MCPWS 18.DPFD1
20.DPFD221.DPFD3
4.MCLUD
5.MCPED
26.DLUD1
19.DPED122.DPED2
23.DLUD2
3.
AR-D13/D14/MU1/DC1 EXTERNAL VIEWS AND INTERNAL STRUCTURES-7
(3) AR-MU1
Code Name Function Active condition Remark
1 MCDRS MP door open / close sensor MP left door open / close detection H : Door closed
2 Control PWB Control PWB Communication with the machine, machine operation control
3 MCSPD MP tray remaining paper quantity sensor
MP tray remaining paper quantity detection L : When pressed
4 MCLUD MP tray upper limit sensor MP tray upper limit detection H : Upper limit detected
5 MDSS1 MP tray rear edge sensor 1 MP tray rear edge size detection L : When pressed
In MP tray rear edge size PWB
6 MCSS2 MP tray rear edge sensor 2 MP tray rear edge size detection L : When pressed
In MP tray rear edge size PWB
7 MCSS3 MP tray rear edge sensor 3 MP tray rear edge size detection L : When pressed
In MP tray rear edge size PWB
8 MCSS4 MP tray rear edge sensor 4 MP tray rear edge size detection L : When pressed
In MP tray rear edge size PWB
9 MCPED MP tray paper empty sensor MP tray paper empty detection L : Paper loaded
10 MCPPD MP transport sensor Detection of paper on the path L : Paper detected
11 MCPWS MP tray width sensor MP tray paper width detection Analog voltage Slide volume
12 MP tray rear edge size PWB
MP tray rear edge size PWB
MP tray rear edge size detection
1.MCDRS
3.MCSPD
10.MCPPD11.MCPWS
4.MCLUD
9.MCPED
5.MCSS1
12.MP tray rear edge size PWB
6.MCSS2
8.MCSS47.MCSS3
2.
AR-D13/D14/MU1/DC1 ADJUSTMENTS-1
[6] ADJUSTMENTS
1. Paper guide position adjustment(AR-D13/D14/MU1)(AR-P350/P450, DM-3500/3501, DM-4500/4501)
1) Turn the main switch on while pressing the [MENU] key and the [OK] key of the operation panel of the main unit of the printer.
2) Press the [MENU] key several times to display "SIZE ADJUSTMENT A" and press the [OK] key.
3) "MAXIMUM SIZE" is displayed.Pull out the paper tray and extend the paper guides to the maximum.Then, return the paper tray into the main unit and press the [OK] key.
4) "MINIMUM SIZE" is displayed.Pull out the paper tray again and narrow the paper guides to theminimum. Then, return the paper tray into the main unit and pressthe [OK] key.
5) Press the [BACK/CLEAR] key to exit the setting mode.
2. Large capacity tray size setup (AR-D13)1) Insert the left paper guides and right paper guides to the front and
rear guide slots for the paper size to be used.
2) Turn the main switch on while pressing the [MENU] key and the [OK] key of the operation panel of the main unit of the printer.
3) After pressing the [MENU] key several times to display "TRAY 1 SIZE SETUP" in the message display, press the [ ] key todisplay "LCC SIZE SETUP" and press the [OK] key.
4) Press the [ ] or [ ] key to change the size and press the [OK] key.
* The large capacity tray paper size is A4 or LTR only.
3. Setting the paper size and typeWhen the paper size or type is changed in a paper tray, set themreferring to the following procedure.
A. Setting the paper size and type from the operation panel on the main printer(AR-P350/P450, DM-3500/3501/4500/4501)
1) Press the [MENU] key repeatedly until "CUSTOM SETTINGS"appear in the message display.
2) Press the [OK] key.When the [OK] key is pressed, "TRAY SETTING" will appear in themessage display.
3) Press the [OK] key.When the [OK] key is pressed,the message shown to be left willappear in the message display.
4) Select the desired paper tray.Press the [ ] or [ ] key repeatedly until the desired paper tray isindicated in the display.
5) Press the [OK] key.The paper size and paper type of the tray selected in step 4) willappear.
•If TRAY 1 is selected in step 4), the message shown to the left willappear in the display.
6) Press the [ ] key.•If TRAY 1 is selected in step 4), the message shown to the left willappear in the display.
Paper guide
Right paper guidesLeft paper guides
TRAY SETTINGTRAY1
LETTERPLAIN
CHANGE TRAY1SETTING OK?
AR-D13/D14/MU1/DC1 ADJUSTMENTS-2
7) Press the [OK] key.To cancel the setting change, press the [BACK/C] key to return tostep 4).
NOTE:Special paper such as thick paper, transparency film, labels, andpostcards can be set for tray 2 and the bypass tray.Envelopes can be set only for tray 2.
8) Select the paper type that has been set in the tray.Press the [ ] or [ ] key repeatedly until the paper type that hasbeen set appears.
9) Press the [OK] key.
10) Ensure that the desired paper size is selected.Press the [ ] or [ ] key repeatedly until the desired paper sizeappears.
•Depending on the selected tray, a selection for "AUTO-AB" and "AUTO-INCH" may appear.
"AUTO-AB": Select when you have set AB system paper."AUTO-INCH": Select when you have set inch system paper.
When the paper system is changed from the inch system to the ABsystem or vise versa, the paper type must be designated. Select thepaper type.
•If you have set paper of non-standard size, select "NON STANDARD".This size can be selected when tray 2 or the bypass tray has beenselected in step 4).
11) Press the [OK] key to terminate the setting.
B. Setting the paper type and size from the touch panel(AR-M350/M450, DM-3551/4551)
1) Press the [CUSTOM SETTINGS] key.The custom setting menu screen will appear.
2) Press the [TRAY SETTINGS] key.The paper tray selection screen will appear.
3) Select the paper tray for which the setting is to be made.•If the desired tray is not on the display, use [ ] or [ ] key to scroll thedisplay until it appears.
4) Select the paper type and the paper size.•If TRAY 1 has been selected in step 3:
The highlighted keys indicate the current selections. To changeeither type or size or both, touch the desired keys to highlight theselections.
Paper types
Special papers such as transparency film and labels can be set for tray 2and the bypass tray.Envelopes can be set only for tray 2.
Paper sizes
•Depending on the selected tray, a selection for "AUTO-AB" and "AUTO-INCH" may appear.
"AUTO-AB": Select when you have set AB system paper."AUTO-INCH": Select when you have set inch system paper.
When the paper system is changed from the inch system to the ABsystem or vise versa, the paper type must be designated. Select thepaper type.
•If you have set paper of non-standard size, select "NON STANDARD SIZE". This size key appears when tray 2 or thebypass tray has been selected in step 3).
5) Touch the [OK] key to complete the setting.
PLAINOK?
LETTEROK?
TOTAL COUNT
TRAY SETTINGS
TRAY 1
TRAY 2
TRAY 3
PLAIN / AUTO-INCH
RECYCLED / AUTO-INCH
TYPE / SIZE
PLAIN / 8 X111 / 2
SIZE
A4
OK
SIZE
A4
OK
AR-D13/D14/MU1/DC1 DISASSEMBLY AND ASSEMBLY, MAINTENANCE-1
[7] DISASSEMBLY AND ASSEMBLY, MAINTENANCE
1.Maintenance System Table
A. When installed to a AR-series machine
B. When installed to a DM-series machine
*1: Replacement reference: Use the counter value of each paper feed port. Paper feed roller/Separation pad/Torque limiter section: 80K or 2 years
Check (Clean, replace, or adjust as necessary.) Clean Replace Adjust Lubricate Move position
Unit name Part nameWhen calling
50K 100K 150K 200K 250K 300K 350K 400K Remark
Paper feed separation section
Paper feed rollers ( ) *1
Torque limiter ( ) *1
Transport section Transport rollers
Transport paper guides
Drive section Gears (Specified position)
Belts
Other Sensors
Unit name Part nameWhen calling
50K 100K 150K 200K 250K 300K 350K 400K Remark
Paper feed separation section
Paper feed rollers ( ) *1:Replace the whole set.
Torque limiter ( )
Transport section Transport rollers
Transport paper guides
Drive section Gears (Specified position)
Belts
Other Sensors
AR-D13/D14/MU1/DC1 DISASSEMBLY AND ASSEMBLY, MAINTENANCE-2
2. MaintenanceA. AR-D13
(1)Multi-purpose paper feed section
a. Paper feed unit disassembly
1) Remove the stopper, and pull out the multi-purpose tray.
2) Remove the left door.
3) Remove the multi-purpose paper feed unit.
b. Roller/Torque limiter
1) Remove the stopper, and pull out the multi-purpose tray.
2) Remove the paper guide.
3) Disengage the roller hook, and remove the roller.
* When installing the roller, check to insure that the hook is securelyengaged in the groove.
4) After removing the roller, remove the torque limiter.
* When installing the torque limiter, check to insure that the pin is fullyinserted into the torque limiter groove.
1)
2)
1)
1)
5)
3)
4)
3)
No. Name Job item Cycle
1 Rollers Clean 40K
Check 80K
Replace 80K or 2 years
2 Torque limiter Check 240K
Replace 480K
2)
a
3)
b
AR-D13/D14/MU1/DC1 DISASSEMBLY AND ASSEMBLY, MAINTENANCE-3
c. Belt
d. Sensor
(2)Tandem tray paper feed section
a. Paper feed unit disassembly
1) Remove the stopper, and pull out the large capacity tray.
2) Remove the left door.
3) Remove the tandem paper feed unit.
No. Name Job item Cycle
1 Belts Check 240K
No. Name Job item Cycle
1 Sensors Check 80K
a
a
a
1)1)
1)
1)
2)
3)
4)3)
3)
4)
4)
a
1)
2)
1)
1)
7)
9)
6)
8)
8)
AR-D13/D14/MU1/DC1 DISASSEMBLY AND ASSEMBLY, MAINTENANCE-4
b. Roller/Torque limiter
1) Remove the stopper, and pull out the large capacity tray.
2) Disengage the roller hook, and remove the roller and the torquelimiter.
•Tandem tray 1
•Tandem tray 2
* When installing the roller, check to insure that the hook is securelyengaged in the groove.
* When installing the torque limiter, check to insure that the pin is fullyinserted into the torque limiter groove.
c. Belt
•Tandem tray 1
•Tandem tray 2
No. Name Job item Cycle
1 Rollers Clean 40K
Check 80K
Replace 80K or 2 years
2 Torque limiter Check 240K
Replace 480K
2)
b
a
a
b
2)
a
2)
No. Name Job item Cycle
1 Gears Lubricate 40K
2 Belts Check 240K
AR-D13/D14/MU1/DC1 DISASSEMBLY AND ASSEMBLY, MAINTENANCE-5
d. Sensor
(3)Paper transport section
1) Remove the left door.
a. Transport roller/Roller
No. Name Job item Cycle
1 Sensors Check 80K
a
a
a
1)1)
1)
1)
2)
3)
4)3)
3)
4)
4)
a
2)
1)
1)
No. Name Job item Cycle
1 Transport rollers Clean 40K
2 Rollers Clean 40K
a
b b
a b
a
b
a
b
AR-D13/D14/MU1/DC1 DISASSEMBLY AND ASSEMBLY, MAINTENANCE-6
b. Belt
(4)Drive section
1) Remove the rear cabinet.
a. Multi-purpose tray drive section
1) Remove the multi-purpose tray drive section.
2) Gear/Belt
b. Tandem tray drive section
1) Remove the tandem tray drive section.
2) Gear/Belt
No. Name Job item Cycle
1 Gears Lubricate 40K
2 Belts Check 240K
No. Name Job item Cycle
1 Gears Lubricate 40K
2 Belts Check 240K
2)
1)
1)
5)
3)4)
4)
No. Name Job item Cycle
1 Gears Lubricate 40K
2 Belts Check 240K
8)
6)
6)6)
6)
7)
7)
7)
AR-D13/D14/MU1/DC1 DISASSEMBLY AND ASSEMBLY, MAINTENANCE-7
(5)Others
1) Remove the rear cabinet.
2) Remove the control PWB and the sensors.
B. AR-D14
(1)Paper feed section
a. Paper feed unit disassembly
1) Remove the stopper, and pull out the tray.
2) Remove the left door.
3) Remove the paper feed unit.
No. Name Job item Cycle
1 Sensors Check 80K
2)
1)
1)
2)
1)
1)
a
1)
2)
1)
1)
5)
3)
3)
3)
3)3)
4)
5)
5)
3)
AR-D13/D14/MU1/DC1 DISASSEMBLY AND ASSEMBLY, MAINTENANCE-8
b. Roller/Torque limiter
1) Remove the stopper, and pull out the multi-purpose tray.
2) Remove the paper guide.
3) Disengage the roller hook, and remove the roller.
* When installing the roller, check to insure that the hook is securelyengaged in the groove.
4) After removing the roller, remove the torque limiter.
* When installing the torque limiter, check to insure that the pin is fullyinserted into the torque limiter groove.
c. Belt
d. Sensor
No. Name Job item Cycle
1 Rollers Clean 40K
Check 80K
Replace 80K or 2 years
2 Torque limiter Check 240K
Replace 480K
1)
2)
a
3)
b
No. Name Job item Cycle
1 Belts Check 240K
No. Name Job item Cycle
1 Sensors Check 80K
a
a
a
1)1)
1)
1)
2)
3)
4)3)
3)
4)
4)
a
AR-D13/D14/MU1/DC1 DISASSEMBLY AND ASSEMBLY, MAINTENANCE-9
(2)Paper transport section
1) Remove the left door.
a. Transport roller/Roller
(3)Drive section
1) Remove the rear cabinet.
a. Multi-purpose tray drive section
1) Remove the multi-purpose tray drive section.
2) Gear/Belt
No. Name Job item Cycle
1 Transport rollers Clean 40K
2 Rollers Clean 40K
2)
1)
1)
a
b b a b
a
a
b
No. Name Job item Cycle
1 Gears Lubricate 40K
2 Belts Check 240K
2)
1)
1)
5)
3)4)
4)
AR-D13/D14/MU1/DC1 DISASSEMBLY AND ASSEMBLY, MAINTENANCE-10
b. Tandem tray drive section
1) Remove the tandem tray drive section.
2) Gear/Belt
(5)Others
1) Remove the rear cabinet.
2) Remove the control PWB.
3) Remove the sensors.
No. Name Job item Cycle
1 Gears Lubricate 40K
2 Belts Check 240K
11)9)
9)
9)
10)
10)
No. Name Job item Cycle
1 Sensors Check 80K
2)
1)
1)
a
a
a
a
1)1)
1)
1)
2)
3)
4)3)
3)
4)
4)
AR-D13/D14/MU1/DC1 DISASSEMBLY AND ASSEMBLY, MAINTENANCE-11
C. AR-MU1
(1)Paper feed section
a. Paper feed unit disassembly
1) Remove the stopper, and pull out the tray.
***************************************TBD************************************
2) Remove the paper feed unit.
b. Roller/Torque limiter
1) Remove the stopper, and pull out the multi-purpose tray.
2) Remove the paper guide.
3) Disengage the roller hook, and remove the roller.
* When installing the roller, check to insure that the hook is securelyengaged in the groove.
4) After removing the roller, remove the torque limiter.
* When installing the torque limiter, check to insure that the pin is fullyinserted into the torque limiter groove.
c. Belt
No. Name Job item Cycle
1 Rollers Clean 40K
Check 80K
Replace 80K or 2 years
2 Torque limiter Check 240K
Replace 480K
1)
3)
1)
2)
2)
a
3)
No. Name Job item Cycle
1 Belts Check 240K
b
AR-D13/D14/MU1/DC1 DISASSEMBLY AND ASSEMBLY, MAINTENANCE-12
d. Sensor
(2)Paper transport section
a. Transport roller/Roller
(3)Drive section
1) Remove the rear cabinet.
2) Remove the tray drive section.
3) Gear/Belt
(4)Others
1) Pull out the multi-purpose tray.
No. Name Job item Cycle
1 Sensors Check 80K
No. Name Job item Cycle
1 Transport rollers Clean 40K
2 Rollers Clean 40K
a
a
a
1)1)
1)
1)
2)
3)
4)3)
3)
4)
4)
a
a
b b
a b
No. Name Job item Cycle
1 Gears Lubricate 40K
2 Belts Check 240K
2)1)
1)
5)4)
4)
3)
a5)
4)
AR-D13/D14/MU1/DC1 BLOCK DIAGRAM, WIRING DIAGRAM-1
[8] BLOCK DIAGRAM, WIRING DIAGRAM
1. BLOCK DIAGRAMA. AR-D13
5V/S
-GN
D
OP
TIO
ND
CP
S
P-G
ND
S-G
ND
+24
V
+5V
DH
RY
1
DH
RY
2D
IGIT
AL
TR
AN
SIS
TO
R
DIG
ITA
LT
RA
NS
IST
OR
DH
PW
BA
C L
AC
N
AC
L
DH
MP
F
DH
DE
SK
SC
N U
N
SC
N U
NA
C L
AC
N
AC
N
AC
N
AC
L
OP
TIO
NA
LY
DIG
ITA
LT
RA
NS
IST
OR
DIG
ITA
LT
RA
NS
IST
OR
TM
MC
LK/
TM
M/
TM
M-T
TM
M
24V
/P-G
ND
MC
LUM
/24
V
S-G
ND
S-G
ND
S-G
ND
MC
PW
S
5V/S
-GN
D
S-G
ND
5V/S
-GN
D
5V/S
-GN
D
5V/S
-GN
D
5V/S
-GN
D
5V/S
-GN
D
5V/S
-GN
DT
LUD
1
TLU
D2
5V/S
-GN
D
5V/S
-GN
DT
PF
D1
5V/S
-GN
D
5V/S
-GN
DT
PE
D2
5V/S
-GN
D
MC
SP
D
MC
SS
4
MC
SS
3
MC
SS
2
MC
SS
1
MC
LUD
MC
PE
D
TD
RS
TT
SD
TP
FD
3
TP
FD
2
TP
ED
1
5V/S
-GN
D
5V/S
-GN
DT
SP
D1
TS
PD
2
TR
AN
SIS
TO
RA
RR
AY
TD
6200
3
24V
TLU
M2/
24V
24V
24V
MC
PC
L/
TLU
M1/
TP
FC
L/
H8/
3644
TA
ND
EM
DE
SK
UN
IT
DIG
ITA
LT
RA
NS
IST
OR
DIG
ITA
LT
RA
NS
IST
OR
DIG
ITA
LT
RA
NS
IST
OR
DIG
ITA
LT
RA
NS
IST
OR
DIG
ITA
LT
RA
NS
IST
OR
F-G
ND
TR
C-D
SK
/
RE
S-D
SK
DS
R-D
SK
/
DT
R-D
SK
/
RX
D-D
SK
TX
D-D
SK
Tan
dem
Con
trol
PW
B
CP
U
TP
CL2
/24
VP
RIN
TE
R
TP
CL1
/24
V
24V
AA
BB
CC
DD
EE
EE
DD
CC
BB
AA
Tan
dem
Des
k B
lock
Dia
gram
(A
R-D
13)
AR-D13/D14/MU1/DC1 BLOCK DIAGRAM, WIRING DIAGRAM-2
B. AR-D14
24V
DP
CL1
/P
RIN
TE
R24
VD
PC
L2/
TR
AN
SIS
TO
RA
RR
AY
TD
6200
3
CP
U
2nd
Con
trol
PW
B
TX
D-D
SK
RX
D-D
SK
DT
R-D
SK
/
DS
R-D
SK
/
RE
S-D
SK
TR
C-D
SK
/
F-G
ND
DIG
ITA
LT
RA
NS
IST
OR
DIG
ITA
LT
RA
NS
IST
OR
DIG
ITA
LT
RA
NS
IST
OR
DIG
ITA
LT
RA
NS
IST
OR
DIG
ITA
LT
RA
NS
IST
OR3T
RA
Y D
ES
K U
NIT
24V
24V
24V
DP
ED
1
DP
FD
1
24V
5V/S
-GN
D
DP
ED
25V
/S-G
ND
5V/S
-GN
DD
PF
D2
5V/S
-GN
D
5V/S
-GN
D
DLU
D2
DLU
D1
5V/S
-GN
D
5V/S
-GN
D
5V/S
-GN
D
5V/S
-GN
D
5V/S
-GN
D
S-G
ND
H8/
3644
MC
PC
L/
DP
FC
L/
DLU
M1/
DLU
M2/
DP
FD
3
DD
RS
MC
PE
D
MC
LUD
MC
SS
1
MC
SS
2
MC
SS
3
MC
SS
4
MC
SP
D
MC
PW
S
DC
SS
11S
-GN
D
S-G
ND
S-G
ND
S-G
ND
DS
PD
15V
/S-G
ND
5V/S
-GN
DD
SP
D2
DC
SS
12
DC
SS
13
DC
SS
14
S-G
ND
S-G
ND
S-G
ND
MC
LUM
/24
V
S-G
ND
S-G
ND
S-G
ND
S-G
ND
DC
SS
21
DC
SS
22
DC
SS
23
DC
SS
24
DH
RY
1
DH
RY
2D
IGIT
AL
TR
AN
SIS
TO
R
DIG
ITA
LT
RA
NS
IST
OR
DH
PW
BA
C L
AC
N
AC
L
DH
MP
F
DH
DE
SK
SC
N U
N
DM
MC
LK/
DM
M/
DM
M-T
DIG
ITA
LT
RA
NS
IST
OR
DIG
ITA
LT
RA
NS
IST
OR
24V
/P-G
ND
DM
M
SC
N U
NA
C L
AC
N
5V/S
-GN
D
5V/S
-GN
DA
C N
AC
N
AC
L
OP
TIO
NA
LY
+5V
+24
V
S-G
ND
P-G
ND
OP
TIO
ND
CP
S
24V
3TR
AY
Blo
ck D
iagr
am (
AR
-D14
)
AA
BB
CC
DD
EE
EE
DD
CC
BB
AA
AR-D13/D14/MU1/DC1 BLOCK DIAGRAM, WIRING DIAGRAM-3
C. AR-MU1
MC
DR
SV
D/S
-GN
D
PR
INT
ER
MA
LTI C
S U
NIT
+5V
1(V
D)
GN
D2(
P-G
ND
)
MC
FC
L/
MC
LUM
/
MC
PC
L/
Mul
ti P
WB
+24
V2(
VB
)
VA
RE
F
MC
PP
D
MC
DR
S
MC
PE
D
MC
LUD
MC
PW
SM
CP
WS
MC
DR
S
MC
PP
DV
D/S
-GN
D
VD
/S-G
ND
MC
LUD
DC
PR
/
MC
SP
D
MC
SE
T
MC
SS
1
MC
SS
2
MC
SS
3
MC
SS
4
GN
D1(
S-G
ND
)
MC
M-T
MC
MC
LK/
MC
M/
MC
PP
D
MC
LUD
MC
SP
DV
D/S
-GN
D
VD
/S-G
ND
MC
PE
DM
CS
PD
MC
PE
D
S-G
ND
MC
SS
1M
CS
S1
S-G
ND
MC
SS
2M
CS
S2
S-G
ND
MC
SS
3M
CS
S3
MC
SS
4M
CS
S4
S-G
ND
MC
PW
SV
AR
EF
MC
FC
L/
DC
PR
/
VB
MC
MC
LK/
MC
FC
L/
MC
PC
L/
MC
M
MC
M-T
VB
MC
LUM
/
MC
M/
MC
PC
L/
VB
VB
/P-G
ND
MC
LUM
/
DH
MP
FD
H P
WB
AC
L
AC
N
AC
N
AC
L
MC
SE
TM
CS
ET
S-G
ND
OP
TIO
NA
LY
VB
AA
BB
CC
DD
EE
EE
DD
CC
BB
AA
MP
T B
lock
Dia
gram
(A
R-M
U1)
AR-D13/D14/MU1/DC1 BLOCK DIAGRAM, WIRING DIAGRAM-4
2. WIRING DIAGRAMA. AR-D13
AR
-D13
Wiri
ng D
iagr
am
CN
-F
CN
-A
CN-B
CN
-C
CN
-G
CN
-I
TA
N C
ontr
ol P
WB
CN
-J
CN
-D
MP
T V
R U
N
CN
-G
OP
TIO
ND
CP
S
CN
-E
(RE
D)
PA
PE
R F
EE
DIN
G U
NIT
SR
A-2
1T-4
CN
-N
DH
PW
B(O
PT
ION
ALY
)
PR
INT
ER
UN
SC
N U
N
CN
-C
CN
-E
CN
-DC
N-A
CN
-B
CN
-M
AA
BB
CC
DD
EE
EE
DD
CC
BB
AA
1 2 3
VD
(+5V
)T
SP
D2
S-G
ND
1792
28-3 S
-GN
DV
D(+
5VR
)
1T
PE
D2
2 4
TLU
D2
PH
R-5
3 5V
D(+
5V)
VD
(+5V
)T
PF
D2
S-G
ND
TP
FD
21 322 3
TLU
M2
LIF
T M
OT
OR
UN
IT
21V
D(+
5V)
TS
PD
1T
SP
D1
S-G
ND
1T
LUM
2V
B(+
24V
)
VD
(+5V
)T
TS
DS
-GN
DT
TS
D321
PH
R-2
1792
28-3
1792
28-3
1792
28-3
TS
PD
2
TA
N S
enso
rP
WB
TP
CL2
TP
CL1
VB
(+24
V)
TLU
M1
S-G
ND
1
VD
(+5V
R)
S-G
ND
1
TLU
M1/
TP
ED
1
1 2
VD
(+5V
)
TA
N S
enso
rP
WB
2
LIF
T M
OT
OR
UN
IT
4
1792
28-3
3
PH
R-2
2
TLU
D1
TP
FD
3
PH
R-5
3
TP
FD
3
5V
D(+
5V)
ELR
-02
1
ELR
-02V
F
DH
MP
F (
OP
TIO
NA
LY)
ELP
-02
ELP
-02
DH
DE
SK
(O
PT
ION
ALY
)
221 21
1 2
N.C
3A
C N
1 2A
C L
B2P
3-V
H 2A
C L
1
AC
N3
N.C B
2P3-
VH
-R
2 1 3
VB
(+24
V)
DH
RY
1D
HR
Y2
PH
R-3
31 2A
C L
N.C
AC
NB
2P3-
VH
1 2 3N
.CA
C N
AC
L
B2P
3-V
H
12
ELR
-02V
FE
LP-0
2
2 1
1D
HR
Y1
DH
RY
23
VB
(+24
V)
2
PH
R-31 2 3
TLU
M1/
VB
(TLU
M1)
N.C
.N
.C.
N.C
.N
.C.
N.C
.N
.C.
N.C
.N
.C.
4 5 6 7 8 9 10P
HR
-10
TLU
D1
TP
FD
3S
-GN
D
VD
(+5V
)S
-GN
D
1 2 3 4 5 6 7 9
VD
(+5V
R)
TP
ED
1N
.C8
PH
R-9
VD
(+5V
)
TP
CL2
/V
B(+
24V
)1 2
PH
R-2
-R(R
ED
)
VB
(+24
V)
TP
CL1
/1 2
PH
R-2
2121
SM
P-0
2V-B
CS
MR
-02V
-B
2121
SM
P-0
2V-N
CS
MR
-02V
-N
234
VD(+5V)TSPD1
VB(TLUM2)TLUM2/
VD(+5V)
S-GND
S-GND1
TPFD29
5
876 N.C.
VD(+5V)
S-GNDTTSD
121110
PHR-12
1 2 3 4 5 6 7 8 9T
PE
D2
TS
PD
2
TLU
D2
VD
(+5V
)
S-G
ND
VD
(+5V
)
S-G
ND
N.C
PH
R-9
VD
(+5V
R)
MC
SS
1
VB
(+24
V)
+24
V(M
CLU
M)
MC
SS
3
MC
SP
D
MC
SS
4
TP
FC
L/
13
MC
LUM
/
MC
PC
L/
TM
M-T
TM
MC
LK/
14 15 16 17 18 19 20
MC
SS
2
TM
M/
GN
D2(
S-G
ND
)
2 3 4 5 6 7 8 9 10 11 121
GN
D1(
P-G
ND
)
VB
(+24
V)
VB
(+24
V)
VD
(+5V
)
GN
D2(
S-G
ND
)
PH
DR
-20V
S-1
F-G
ND
VD
(+5V
)
MC
PE
D
TD
RS
MC
PW
S
TP
FD
1
MC
LUD
13 14 15 162 3 4 5 6 7 8 9 10 11 121G
ND
2(S
-GN
D)
GN
D2(
S-G
ND
)
GN
D2(
S-G
ND
)
GN
D2(
S-G
ND
)
VD
(+5V
)
VD
(+5V
)V
D(+
5V)
VD
(+5V
)N
.C.
MC
PW
S2
PH
DR
-16V
S-1
PH
R-1
1
65 94 111031 872/R
ES
MD
/RX
D/T
XD
CLO
CK
OU
T+
5V(V
D)
FV
ppR
ES
TX
DS
-GN
DT
ES
T
TX
D-D
SK
RX
D-D
SK
/D
TR
-DS
K/
RE
S-D
SK
P-G
ND
GN
D2
DS
R-D
SK
/
TR
C-D
SK
/
S-G
ND
1 2 3 4 5 6 7 8 9 10 11
+24
V(V
B)
12N
.C.
+5V
(VD
)
PH
DR
-12V
S-1
9
76
43 111
10
87
542 111 98
65
32 10
SM
R-1
1V-B
TR
C-D
SK
/
DS
R-D
SK
/
GN
D2
RE
S-D
SK
RX
D-D
SK
/
S-G
ND
DT
R-D
SK
/
TX
D-D
SK
P-G
ND
+24
V(V
B)
+5V
(VD
)
4
123
5 45
3
12
67891011
67891011
SM
R-1
1V-N
SM
P-1
1V-N
C
212
1212
1S
MR
-02V
-NS
MP
-02V
-NC
SM
P-0
2V-B
CS
MR
-02V
-B
MC
LUM
/1
LIF
T M
OT
OR
UN
IT
PH
R-2
2+
24V
3T
MM
-TT
MM
/
5 2
PH
R-5
+24
V
TM
MC
LK/
4 1G
ND
1
MC
SP
D2
+5V
31
GN
D2
1792
28-3
GN
D2
1N
.C.
2
MC
SS
4
4M
CS
S1
6
MC
SS
23
MC
SS
35
PH
R-6
MC
SP
D
MP
T L
D P
WB
TP
FC
L
MC
PC
L
MC
LUM
TM
M
18 14
16 13
17 15
18 15
131617 14 8 5
487 4
57
9 6
9 6
SM
R-1
8V-B
SM
P-1
8V-B
C
32
1
32
1S
MP
-03V
-BC
SM
R-0
3V-B
31 2
MC
LUD
1
GN
D2
3M
CLU
D
+5V
+5V
2
TP
FD
1G
ND
2T
PF
D117
9228
-3
1792
28-3
TD
RS
GN
D2
MC
PE
D+
5V
+5V
1
TD
RS
331
MC
PE
DG
ND
222
1792
28-3
1792
28-3
MC
PW
SM
CP
WS
2V
AR
EF
1T 3T2T
63 11852 10741 9
AR-D13/D14/MU1/DC1 BLOCK DIAGRAM, WIRING DIAGRAM-5
B. AR-D14
3TR
AY
Des
k W
iring
Dia
gram
(A
R-D
14)
2nd
Con
trol
PW
B
CN
-F
OP
TIO
ND
CP
S
CN
-E
PA
PE
R F
EE
DIN
G U
NIT
CN
-D
PA
PE
R F
EE
DIN
G U
NIT
CN-B
CN
-A
CN
-G
CN
-H
CN
-L
CN
-J
PA
PE
R F
EE
DIN
G U
NIT
CN
-K
CN
-I
CN
-C
DH
MP
F (
OP
TIO
NA
LY)
CN
-A
DH
PW
B(O
PT
ION
ALY
)
DH
DE
SK
(O
PT
ION
ALY
)
SC
N U
N
CN
-D
CN
-E
PR
INT
ER
UN
CN
-BC
N-N
CN
-M
AA
BB
CC
DD
EE
EE
DD
CC
BB
AA
DM
M
DP
FC
L/
MC
PC
L/
+24
VM
CLU
M12
LIF
T M
OT
OR
UN
IT
MC
LUM
/
DM
MC
LK/
DM
M/
GN
D1
+24
V
DM
M-T
12345
212
112
21
PH
R-2
PH
R-5
SM
P-0
2V-N
CS
MR
-02V
-N
SM
P-0
2V-B
CS
MR
-02V
-B
49 3
8
5
11
SM
P-1
1V-N
C
2
76 15
109 3
SM
R-1
1V-N8 2
7 4
1110
16
MC
SP
D2
+5V
31
GN
D2
1792
28-3
GN
D2
1N
.C.
2
MC
SS
4
4M
CS
S1
6
MC
SS
23
MC
SS
35
PH
R-6
131415161718
456789131415161718
456789
SM
R-1
8V-B
SM
P-1
8V-B
C
MC
LUD
GN
D2
+5V
+5V
DP
FD
1
GN
D2
1 2 3 31 2
1792
28-3
1792
28-3
MC
LUD
MC
PE
D
DD
RS
DP
FD
1
MC
SP
D
MP
T L
D P
WB
+5V
GN
D2
DD
RS
+5V
MC
PE
D
GN
D2
1 2 3 1 2 317
9228
-3
1792
28-3
SM
P-0
3V-B
C1
1
3
SM
R-0
3V-B3 2
2V
AR
EF
2TM
CP
WS
1TM
PT
VR
UN
MC
PW
S2
3T
RX
D-D
SK
/6 9
RE
S-D
SK
121
GN
D2
4
DS
R-D
SK
/
7 10T
RC
-DS
K
P-G
ND
2
TX
D-D
SK
5
F-G
ND
8D
TR
-DS
K/
11
S-G
ND
3V
D(+
5V)
+24
V(V
B)
1110521 98
1
43 6
3
7
2 1110987654
SM
R-1
1V-B
DP
ED
2
DLU
D2
4
PH
R-9
7S
-GN
D
3S
-GN
D
VD
(+5V
)
VD
(+5V
)
5 96
VD
(+5V
)
81S
-GN
DD
PF
D3
2
N.C.
N.C
VB(DLUM2)
S-GND
DLUM2/
PHR-12
N.C
VD(+5V)
N.C.
N.C.
N.C
DSPD2
N.C.
12
12
43
567891011
21D
PC
L1/
VB
(+24
V)
PH
R-2
-R(R
ED
)
1 2D
PC
L2/
VB
(+24
V) P
HR
-2
S-G
ND
DP
ED
1S
-GN
D
VD
(+5V
)
2 3
VD
(+5V
)6
DP
FD
2V
D(+
5V)
5 971 4S
-GN
DD
LUD
1
8
PH
R-9
-R(R
ED
)
VB
(+24
V)
13
F-G
ND
GN
D2(
S-G
ND
)
MC
SS
4
12
DP
FC
L/
GN
D1(
P-G
ND
)
4
MC
SS
217 20
VD
(+5V
)
181
DM
M-T
16143 97
MC
SS
1
VB
(+24
V)
11
MC
SS
3
VB
(+24
V)
MC
SP
D
MC
PC
L/
1586M
CLU
M/
DM
M/
2
GN
D2(
S-G
ND
)
DM
MC
LK/
+24
V(M
CLU
M)
5 1910
PH
DR
-20V
S-1
MC
PE
D
DD
RS
N.C
.
DP
FD
1
MC
LUD
MC
PW
S2
3 135 12
VD
(+5V
)4
GN
D2(
S-G
ND
)1 96 7 15 1611 14102 8
VD
(+5V
)G
ND
2(S
-GN
D)
GN
D2(
S-G
ND
)
VD
(+5V
)V
D(+
5V)
GN
D2(
S-G
ND
)
VD
(+5V
)M
CP
WS
PH
DR
-16V
S-1
2 7 81 3 10 114 95 6 PH
R-1
1TE
ST
S-G
ND
RE
S
+5V
(VD
)C
LOC
K O
UT
/TX
D
FV
pp
/RX
D
TX
D
MD
/RE
S
11
TX
D-D
SK
P-G
ND
10543
DS
R-D
SK
/
S-G
ND
RX
D-D
SK
/
1
DT
R-D
SK
/
RE
S-D
SK
8
TR
C-D
SK
/
7 92 6
GN
D2
12N
.C.
+24
V(V
B)
VD
(+5V
)
PH
DR
-12V
S-1
N.C
.
81
DS
PD
1
3 6 9N
.C
5 7N
.C
VB
(DLU
M1)
VD
(+5V
)
42D
LUM
1/
S-G
ND
N.C
10N
.C.
PH
R-1
0
DC
SS
14
6
DC
SS
1321
S-G
ND
5D
CS
S12
3 4
DC
SS
15
DC
SS
11
PH
R-6
DC
SS
23D
CS
S22
1
S-G
ND
DC
SS
24
5D
CS
S21
63 42D
CS
S25
PH
R-6
-R(R
ED
)
PH
R-32
VB
(+24
V)
3D
HR
Y2
DH
RY
11
17
13
16 515 6
1618 6
1414 4
18
SM
P-1
8V-N
C
1517
13
5
SM
R-1
8V-N
4S
-GN
D32
DP
FD
31
DP
FD
3V
D(+
5V)
1792
28-3D
PE
D2
317
9228
-3
1D
PE
D2
2V
D(+
5V)
S-G
ND
3
VD
(+5V
)D
LUD
2S
-GN
D2
DLU
D2
1
1792
28-3
DS
PD
22 2
DLU
M2
1
S-G
ND
3D
SP
D2
1
VD
(+5V
)
LIF
T U
P M
OT
OR
UN
IT
1792
28-3
DP
CL1
221
1
SM
P-0
2V-N
CS
MR
-02V
-N
DP
CL2
221
1
SM
P-0
2V-B
CS
MR
-02V
-B
VD
(+5V
)D
LUD
1D
LUD
131 2
S-G
ND
1792
28-3
DP
ED
1S
-GN
D2 3
DP
ED
11
VD
(+5V
)
1792
28-3
1792
28-3S
-GN
DD
PF
D2
2 3D
PF
D2
1V
D(+
5V)
456131415161718
456131415161718
SM
P-1
8V-N
CS
MR
-18V
-N
LIF
T U
P M
OT
OR
UN
IT
DLU
M1
DS
PD
1
2
S-G
ND
1 21
DS
PD
1V
D(+
5V)
317
9228
-3
PH
R-2
1
DC
SS
136
DC
SS
14
32G
ND
2D
CS
S11
DC
SS
124 5
N.C
.
PH
R-6
PLS
-PW
B1
DC
SS
235
DC
SS
24
DC
SS
212 4 6
DC
SS
22
GN
D2
1
PLS
-PW
B2
3
N.C
.
PH
R-6
-R(R
ED
)
1
N.C
2 B2P
3-V
HAC
N
3
AC
L
2
AC
L
1
N.C
PH
R-3
3 2
VB
(+24
V)
3
AC
N
DH
RY
1
B2P
3-V
HDH
RY
2
1
1E
LR-0
2VF
12
2 ELP
-02
AC
N
1
N.C
3N
.C
AC
L
B2P
3-V
H
AC
L B2P
3-V
H-R
1 3 22
AC
N
1
ELR
-02
ELR
-02V
F
ELP
-02
2E
LP-0
2
1 2 1 221
SR
A-2
1T-4
PH
R-2
AR-D13/D14/MU1/DC1 BLOCK DIAGRAM, WIRING DIAGRAM-6
C. AR-MU1
DH
MP
F(O
PT
ION
ALY
)
TO
PR
INT
ER
BO
DY
MP
T
PW
B
CN
-C
21
DH
PW
B
(OP
TIO
NA
LY)
CN
-B
CN
-D
CN
-A
PA
PE
R F
EE
DIN
G U
NIT
PR
INT
ER
UN
CN
-B
CN
-A
CN
-C
AA
BB
CC
DD
EE
EE
DD
CC
BB
AA
MP
T W
iring
Dia
gram
(A
R-M
U1)
22 ELP
-02
11
ELR
-02V
F
3D
CP
R/
+24
V2 1
N.C
PH
R-3
2A
C N
AC
L1 3
N.C
B2P
3-V
H
AC
L1 2
N.C
AC
N3
B2P
3-V
H
11
22
ELP
-02
ELR
-02V
F
1512963 171411852 161310741 18 19 20 24232221
GN
D1
+5V
GN
D2
VA
RE
F
MC
PP
DM
CD
RS
MC
PE
DM
CLU
DM
CP
WS
MC
SS
4
MC
SS
1M
CS
S2
MC
SS
3
MC
SP
DM
CS
ET
MC
PC
L/M
CF
CL/
MC
LUM
/M
CM
-TM
CM
CLK
/M
CM
/e/
?D
CP
R/
+24
V PA
DP
-24V
-1-E
12
4
7
11
5
10
3
6
1
9
2
8
+5V
MCPWS
+5V
MCPPD
+5V
CN-E
+5V
VAREF
MCPED
N.C.MCPWS2
MCLUD1413
+5V
MCDRS
MCSPDPHDR-14VS-1
31 2 5
MC
SS
2
8M
CS
S1
64 7 9 10
GN
D2
GN
D2
GN
D2
CN
-F MC
SS
3M
CS
S4
11 12
GN
D2
GN
D2
GN
D2
GN
D2
GN
D2
PH
DR
-12V
S-1
24V
1M
CLU
M/
2P
HR
-2
MC
PC
L/
+24
VM
CF
CL/
+24
V
31
MC
M/
GN
D1
+24
V
MC
M-T
2 54M
CM
CLK
/6 7 8 9
PH
R-9
21+
24V
DC
PR
/
PH
R-3
N.C
3
MC
SS
4
17M
CP
CL/
11
MC
MC
LK/
GN
D1
5
MC
PE
D
16
MC
SS
3
10
MC
SE
T
4
MC
M-T
241812
N.C
MC
DR
S
22206
MC
SS
2
3
MC
SP
D14
MC
LUM
/
VA
RE
F
8
MC
SS
1
MC
PP
D
2
MC
PW
S
13
DC
PR
/
7
MC
FC
L/
+5V
1 15
MC
M/
GN
D2
23199M
CLU
D
21
+24
V
PH
DR
-24V
S-1
11
22
11
22
SM
R-0
2V-B
SM
R-0
2V-N
SM
P-0
2V-N
C
SM
P-0
2V-B
C
SR
A-2
1T-4
MC
LUM
LIF
T M
OT
OR
UN
IT
MC
LUM
/24
V
MP
T L
D P
WB
MC
SS
2M
CS
S3
MC
SS
4
N.C
.
MC
SS
1G
ND
2
PH
R-6
PH
R-2
52 6431
MC
PC
L
MC
FC
L
MC
MC
LK/
MC
M/
4
GN
D1
31
MC
M
MC
M-T
5
+24
V2 P
HR
-5
8 413
58141718 69
6915
16
18
7 515
47131617 14
SM
R-1
8V-B
SM
P-1
8V-B
C 3 2 123 1
SM
P-0
3V-B
CS
MR
-03V
-B
GN
D2
1
MC
LUD
MC
PP
D
2 2
+5V
3
+5V
3
GN
D2
1
GN
D2
3
GN
D2
3M
CP
ED
+5V
1M
CD
RS
12+
5V
2
3TM
CP
WS
2M
CP
WS
VA
RE
F
2T 1T
1 2 3G
ND
2M
CS
PD
+5V
MC
DR
S
MC
LUD
MC
PP
D
MC
PE
D
MC
SP
D
MP
T V
R U
N
AR-D13/D14/MU1/DC1 BLOCK DIAGRAM, WIRING DIAGRAM-7
3. CIRCUIT DIAGRAMA. AR-D13 / AR-D14
3
1 2
3
1 2
3
1
2
3
1
2
3
1
2
3
1
2
....
..
....
3
1
3
1
..
P
P60
17
P61
18
P62
19
P63
20
P64
21
P65
22
P66
23
P67
24
P50/IN
T0
25
P51/IN
T1
26
P52/IN
T2
27
P53/IN
T3
28
P54/IN
T4
29
P55/IN
T5/ADTRG
30
P56/IN
T6/TMIB
31
P57/IN
T7
32
Vcc33
P7334
P74/TMRIV35
P75/TMCIV36
P76/TMOV37
P7738
P80/FTCI39
P81/FTOA40
P82/FTOB41
P83/FTIA42
P84/FTIB43
P85/FTIC44
P86/FTID45
P8746
P20/SCK347
P21/RXD48
P22/TXD
49
P32/SO1
50
P31/SI1
51
P30/SCK1
52
P10/TMOW
53
P14/PWM
54
P15/IR
Q1
55
P16/IR
Q2
56
P17/IR
Q3/TRGV
57
AVcc
58
PB7/AN7
59
PB6/AN6
60
PB5/AN5
61
PB4/AN4
62
PB3/AN3
63
PB2/AN2
64
..
I2
G1
O3
I2
G1
O3
I2
G1
O3
I2
G1
O3
I2
G1
O3
I2
G1
O3
..
CNF-6TXD-DSK
C103
473Z/50V
CNF-8DTR-DSK/
CNF-10
RES-DSK
C143
47uF/35V+
C142
47uF/35V+
C128
223Z/50V
C127
473Z/50V
CNF-1+24V
C141
473Z/50V
C104
473Z/50V
CNF-3+5V
CNF-5S-GND
CNF-4GND2
CNF-2P-GND
CNF-11TRC-DSK/
CNH-1
R165
4.7kJ
CNF-9DSR-DSK/
R162
4.7kJ
CNF-7RXD-DSK/
CNM-2/RES
CNM-5CLOCK OUT
D213
DAN202K
D212
DAP202K
D201 DAP202K
D211 DAN202K
D210DAP202K
R152
4.7kJ
CNC-1VB
CNG-1
D202 DAN202K
R103
4.7kJ
CND-1,3,7
CNN-1
CNM-10
CNM-9TXD
CNM-3/RXD
CNM-4/TXD
CNM-8RES
C126
222Z/50V
CP105
DSR
CP106
DTR
CP101
TXD
CP104
RXD
CP103
TRC
D207
DAN2
D203
DAP2
CNB-1,7,10
CNI-1,4,7
CNJ-4,7
CND-14,16,20
CNA-1,4,7S-GND
CNL-6
CND-8
CNK-6
R116
4.7kJ
CP102
RES
CNM-6
R119
4.7kJ
LED101
SLR-322R131
4.7kJ
R115
220J1/4WPS102
RXE010
PS101
RXE010
PS103
RXE010
CNB-5VB(TLUM2)
CNB-6VB(DLUM2)
JP104
VB(LUM2)
JP101
VB(LUM1)
JP105
VB(MCLUM)
CNJ-2VB(TLUM1)
CNJ-3VB(DLUM1)
CND-5VB(MCLUM)
CNE-1,5,7,11
CNE-13MCPWS2
CNI-6
R145
120J1/4W
CNA-6
R133
120J1/4W
JP103
+5V
JP102
+5V
CNI-3,9
CNE-3,4,9,10,15
CND-13
CNA-3,9+5V
CNJ-6,9
CP107VD
CNB-3,9,12
R166
4.7kJ
R163
4.7kJ
R118
4.7kJ
R153
4.7kJ
DTR215
DTC114YKA
DTR216
DTC114YKA
DTR204
DTC114YKA
DTR210
DTC114YKA
DTR201
DTC114YKA
DTR203
DTC114YKA
CP108
VSS
VD
VD
VD
VB
VD
VD
+5V
VD
VD
VD
VD
VD
VD
VD
VD
VD
VD
+5V
DSR-DSK
DSR-DSK
MCLUD
TLUD1(DLUD1)
TLUD2(DLUD2)
MCSPD
DHRY2/
TRC-DSK
DTR-DSK
TXD-DSK
RXD-DSK
TRC-DSK
TPED2(DPED2)
TSPD1(DSPD2)
TSPD2(DPFD3)
(DPWS1)
(DPWS2)
MCPWS
RES-DSK
DHRY1/
(DCSS15)
TMM(DMM)
TPFD1(DPFD1)
TPFD2
TPFD3(DPFD2)
RXD-DSK
TMMCLK(DMMCLK)
(DCSS12)
(DCSS13)
(DCSS14)
(DCSS11)
MCSS1
MCSS2
MCSS3
MCSS4
TTSD(DSPD1)
TDRS(DDRS)
DTR-DSK
TMM-T(DMM-T)
TXD-DSK
(DPWS1)
(DPWS2)
MCPWS
TPFD1(DPFD1)
TPFD2
TPFD3(DPFD2)
TMM-T(DMM-T)
TDRS(DDRS)
TTSD(DSPD1)
MCSS4
MCSS3
MCSS2
MCSS1
MCSPD
TLUD2(DLUD2)
TLUD1(DLUD1)
MCLUD
(DCSS11)
(DCSS15)
(DCSS14)
(DCSS13)
(DCSS12)
(DCSS22)
(DCSS22)
LED
LED
DPCL2
A
A
B
B
C
C
E
D
C
B
A
FC31 not installed
FC31 not installed
Not installed in mass production
Not installed in mass production
Not installed in mass production
Not installed in mass production
Not installed in mass production
Not installed in mass production
Not installed in mass production
Not installed in mass production
Not installed in mass production
Not installed in mass production
Not installed in mass production
Not installed in mass production
AR-D13/D14/MU1/DC1 BLOCK DIAGRAM, WIRING DIAGRAM-8
MCLUM
TLUM1(DLUM1)
TLUM2(DLUM2)
MCPCL
TPCL1(DPCL2)
TPCL2(DPCL1)
TPFCL(DPFCL)
TPFD1(DPFD1)
(DCSS22)
VAREF
MCPWS
(DPWS2)
(DPWS1)
TSPD2(DPFD3)
TSPD1(DSPD2)
TPED2(DPED2)
WRITING 'H'
FVpp
(DCSS23)
(DCSS24)
(DCSS25)
(DCSS21)
222Z/50V*29
10kJ*29
10kJ*29
DHRY1
(DCSS15)
TMM(DMM)
R192
R193
COM9
I11
I22
I33
I44
I55
I66
I77
GND8
O116
O215
O314
O413
O512
O611
O710
3
1 2
3
1 2
3
1 2
3
1 2
3
1 2
3
1 2
1
3
2
3
1
2
PB1/AN11
PB0/AN02
AVss3
TEST4
X25
X16
Vss7
OSC18
OSC29
RES10
P90/FVpp11
P9112
P9213
P9314
P9415
IRQ016
P60
17
P61
18
P62
19
P63
20
P64
21
P65
22
P66
23
P67
24
P50/IN
T0
25
P51/IN
T1
26
P52/IN
T2
27
P53/IN
T3
28
P54/IN
T4
29
P55/IN
T5/ADTRG
30
P31/SI1
51
P30/SCK1
52
P10/TMOW
53
P14/PWM
54
P15/IR
Q1
55
P16/IR
Q2
56
P17/IR
Q3/TRGV
57
AVcc
58
PB7/AN7
59
PB6/AN6
60
PB5/AN5
61
PB4/AN4
62
PB3/AN3
63
PB2/AN2
64
I2
G1
O3
I2
G1
O3
I2
G1
O3
I2
G1
O3
I2
G1
O3
I2
G1
O3
I2
G1
O3
I2
G1
O3
I2
G1
O3
I2
G1
O3
I2
G1
O3
I2
G1
O3
I2
G1
O3
I2
G1
O3
CNC-2,H-2TPCL2/(DPCL2/)
CNG-2TPCL1/ (DPCL1/)
(DCSS21)CNL-5
(DCSS25)CNL-1
TPFD1 (DPFD1)CNE-12
TPED2 (DPED2)CNA-8
(DCSS24)CNL-2
(DCSS23)CNL-3
(DPWS1)CNJ-8
TSPD2 (DPFD3)CNA-2
MCPEDCNE-6
(DPWS2)CNB-11
TPED1 (DPED1)CNI-8
CNM-7FVpp
TPFD2CNB-8
TPFD3 (DPFD2)CNI-2
CND-6MCLUM/
TMM-T (DMM-T)CND-11
TDRS (DDRS)CNE-8
TTSD (DSPD1)CNJ-5
MCSS4CND-19
MCSS3CND-18
MCSS2CND-17
MCSS1CND-15
MCSPDCND-12
CND-4MCPCL/
CND-2TPFCL/ (DPFCL/)
Q201
2SB1198K T146 QR
R137
3kJ1/2W
10kJ
R134
IC102
TD62003AP
CNJ-1TLUM1/ (DLUM1/)
CNB-4TLUM2/ (DLUM2/)
R102
10kJ
CNM-1
MD
TLUD2 (DLUD2)CNA-5
TLUD1 (DLUD1)CNI-5
MCLUDCNE-2
(DCSS11)CNK-5
(DCSS15)CNK-1
(DCSS14)CNK-2
(DCSS13)CNK-3
(DCSS12)CNK-4
Q203
2SB1198K T146 QR
R158
3kJ1/2W
10kJ
R159
3kJ1/2WR156
(DCSS22)CNL-4
3kJ1/2W
R136
3kJ1/2W
R135
3kJ1/2W
R154
R117
10kJ
47J1W
R164
47J1W
R138
R132
1MJ
R108R104R105R106R190R151R139R148R188R180R144R114 R187R189R182R183R184R185R186R107 R191 R141R113R109R110R112 R111
R124
R121
R122
R150
R140
R149
R175
R167
R143
R172
R173
R123
R142
R178
R129
R125
R127
R126
R128
C109
C105
C106
C107
C139
C125
C120C124
C137
C129
C121
C136
C138
C115
C131
C132
C133
C134
C135
C108 C122C140
C114
C110
C111C113
C112
C117
473Z/50V
R177
CND-9TMM/ (DMM/)
CNM-11
TEST
R147
C123
R146
R181
TSPD1 (DSPD2)CNB-2
C130
R168
R120
R171
R169
R130
R176
R174
D208
DAN202K
D204
DAP202K
MCPWSCNE-14
C119
C118
473Z/50V*3
C101
D209
DAN202K
D207
DAN202K
D205
DAP202K
D203
DAP202K
C116
47uF/35V
+
3kJ1/2W
R155
R161
3kJ1/2W
10kJ
R160
Q202
2SB1198K T146 QR47J1W
R179
3kJ1/2W
R157
X101
CSTS0737MG03
CND-10TMMCLK/ (DMMCLK/)
CNN-2DHRY1
CNN-3DHRY2
C102
473Z/50V
D206DAP202K
R170
IC101
HD64F3644H
R101
10kJ
DTR208
DTC114YKA
DTR209
DTC114YKA
DTR220
DTC114YKA
DTR213
DTC114YKA
DTR207
DTC114YKA
DTR218
DTC114YKA
DTR214
DTC114YKA
DTR202
DTC114YKA
DTR212
DTC114YKA DTR217
DTC114YKA
DTR211
DTC114YKA
DTR205
DTC114YKA
DTR219
DTC114YKA
DTR206
DTC114YKA
+5V
VD
VB
VB
VB
VB
VB
VB
VB
+5V
VB
VB
VB
VD
VD
VD
VD
TLUM2(DLUM2)
TLUM2(DLUM2)
(DCSS21)
(DCSS21)
(DCSS25)
(DCSS25)
(DCSS24)
(DCSS24)
(DCSS23)
(DCSS23)
TLUM1(DLUM1)
TLUM1(DLUM1)
MCPED
TPED1(DPED1)
TPED2(DPED2)
TSPD1(DSPD2)
TSPD2(DPFD3)
TPED2(DPED2)
TSPD1(DSPD2)
TSPD2(DPFD3)
(DPWS1)
(DPWS2)
MCPWS
RES-DSK
DHRY1/
(DCSS15)
TMM(DMM)
TMM(DMM)
TPFD1(DPFD1)
TPFD2
MCLUM
MCLUM/
MCLUM/
MCLUM
DHRY2/
DHRY1/
TMMCLK(DMMCLK)
MCPED
TPED1(DPED1)
(DCSS22)
ED
DPCL2
DPCL2
C
C
D
D
E
E
E
D
C
B
A
FC31 not installed
FC31 R192,R193 1MJ installed
FC31 R192,R193 222Z installed
AR-D13/D14/MU1/DC1 BLOCK DIAGRAM, WIRING DIAGRAM-9
*L:TandemDesk,R:2ndDesk
CN-C
1 2VB(+24V)
TPCL2/
(B2B-PH-K-S)
PICKUP
CLUTCH
*TAN(FC31)Only
PICKUP
CLUTCH
VB(+24V)
TPCL1/
1
CN-G
(B2B-PH-K-R(RED))
2
VB(+24V)
DPCL1/
4
MCPED
71 6
(B16B-PHDSS-B)
2 53 8
CN-E
MULTI
11
14
9 12
15
MULTI
10
13
16
GND2(S-GND)
MCLUD
TDRS
VD(+5V)
GND2(S-GND)
TPFD1
N.C
VD(+5V)
GND2(S-GND)
GND2(S-GND)
VD(+5V)
VD(+5V)
MCPWS2
MCPWS
VD(+5V)
GND2(S-GND)
MCLUD
VD(+5V)
VD(+5V)
GND2(S-GND)
MCPED
GND2(S-GND)
DDRS
VD(+5V)
VD(+5V)
GND2(S-GND)
DPFD1
MCPWS2
MCPWS
VD(+5V)
N.C
N.C
+5V(VD)
P-GND
DTR-DSK/
+24V(VB)
TIMING
TRC-DSK/
11
UART
RES-DSK
POWER
RES-DSK
S-GND
DSR-DSK/
DTR-DSK/
RXD-DSK/
TXD-DSK
GND2
(B12B-PHDSS-B)
S-GND
P-GND
N.C
RXD-DSK/
+5V(VD)
+24V(VB)
10
9DSR-DSK/
87
GND2
6543
TRC-DSK/
2
TXD-DSK
1 12
CN-F
CN-A
CN-B
CN-D
CN-F
CN-C
CN-H
CN-I
CN-M
CN-J
CN-L
CN-KCN-G
CN-N
CN-E
TopView
CN-H
1 2
(B2B-PH-K-S)
PICKUP
CLUTCH
VB(+24V)
DPCL2/
*3T(FC32)Only
4
MPTLD
PWB
53
(B6B-PH-K-R(RED))
1 6
CN-L
DCSS24
2
DCSS23
DCSS22
DCSS21
DCSS25
S-GND *3T(FC32)Only
CN-K
(B6B-PH-K-S)
21MPTLD
PWB
3 4 5 6
DCSS14
DCSS13
DCSS12
DCSS11
DCSS15
S-GND *3T(FC32)Only
CN-M
(B11B-PH-K-S)
2
+5V(VD)
1FLASH
WRITER
PWB
3 4 5 6 7FVpp
/TXD
/RES
8 9
MD
S-GND
CLOCKOUT
/RES
+5V(VD)
FVpp
MD
S-GND
CLOCKOUT
10
TXD
TXD
/RXD
RES
RES
/RXD
/TXD
11
TEST
TEST
GND1(P-GND)
4
MCLUM/
71 6
(B20B-PHDSS-B)
10
2 53 8 9
CN-D
MULTI
13
TMM-T
16
TMMCLK/
19
MCSS1
11
MCSPD
14
MCPCL/
17
20
MULTI
TMM/
12
15
MCLUM/
18
GND2(S-GND)
DMMCLK/
MCSPD
DPFCL/
DMM-T
DMM/
VB(+24V)
TPFCL/
VB(+24V)
+24V(M
CLUM)
MCPCL/
VB(+24V)
VD(+5V)
MCSS4
GND2(S-GND)
MCSS2
MCSS3
VB(+24V)
VB(+24V)
+24V(M
CLUM)
VB(+24V)
GND1(P-GND)
VD(+5V)
GND2(S-GND)
MCSS1
GND2(S-GND)
MCSS2
MCSS3
MCSS4
GND2(S-GND)
GND2(S-GND)
4 71
VB(TLUM2)
S-GND
S-GND
6
TLUM2/
10
2 53 8 11
S-GND
TSPD1
DETEC
TER
9
TPFD2
CN-B
(B12B-PH-K-S)
LIFTUP
MOTOR
12
VD(+5V)
VD(+5V)
N.C
S-GND
VD(+5V)
VB(DLUM2)
DLUM2/
N.C
DSPD2
DETEC
TER
TTSD
VD(+5V)
N.C
N.C
N.C
N.C
N.C
N.C
N.C
1 74
CN-J
DETEC
TER
83 52 6
(B10B-PH-K-S)
LIFTUP
MOTOR
TLUM1/
VB(TLUM1)
VB(DLUM1)
9
DSPD1
DLUM1/
N.C
N.C
S-GND
VD(+5V)
N.C
N.C
N.C
N.C
N.C
10
N.C
N.C
N.C
N.C
N.C
VB(+24V)
DHRY1
1
CN-N
(B3B-PH-K-S)
2
DHRY2
3
DHRILLY
VB(+24V)
DHRY2
DHRY1
TSPD2
DETEC
TER
TLUD2
741
S-GND
9
CN-A
63
S-GND
852
N.C
TPED2
(B9B-PH-K-S)
VD(+5V)
VD(+5V)
DPFD3
S-GND
VD(+5V)
DLUD2
S-GND
VD(+5V)
VD(+5V)
DPED2
S-GND
VD(+5V)
4 71
S-GND
TPED1
6
TLUD1
(B9B-PH-K-S)
2 53 8
S-GND
TPFD3
DETEC
TER
9
CN-I
VD(+5V)
VD(+5V)
S-GND
DPFD2
VD(+5V)
S-GND
DLUD1
VD(+5V)
DPED1
S-GND
VD(+5V)
N.C
VD(+5V)
AA
BB
CC
DD
EE
EE
DD
CC
BB
AA
AR-D13/D14/MU1/DC1 BLOCK DIAGRAM, WIRING DIAGRAM-10
B. AR-MU1
Par
ts V
iew
CN
-B CN
-C
CN
-A
CN
-E
CN
-D
CN
-F
CN
-C
1 3 5 7 9 11 13 15 17 19 21 23
+5V
1V
AR
EF
+24
V2
(JS
T:B
24B
-PH
DS
S-B
)
MC
PP
D
MC
DR
S
MC
SS
1
MC
SS
3
MC
SP
D
MC
PC
L/
MC
LUM
/
MC
MC
LK/
2 4 6 8 10 12 14 16 18 20 22 24
MC
LUD
GN
D2
GN
D1
MC
PE
D
MC
PW
S
MC
SS
2
MC
SS
4
MC
SE
T
MC
FC
L/
MC
M-T
MC
M/
N.C
DC
PR
/
CN
-A VB
(MC
LUM
)1 2
DC
PR
/
(JS
T:B
3B-P
H-K
-S)
CN
-B
+24
V2
2M
CLU
M/
(JS
T:B
2B-P
H-K
-S)
1
GN
D1
+24
V2
MC
M/
CN
-D
MC
MC
LK/
+24
V2
MC
M-T
MC
PC
L/
MC
FC
L/
+24
V2
5 73 841 2 6
(JS
T:B
9B-P
H-K
-S)
9 CN
-E
1 3 5 7 9 11 13
+5V
1+
5V1
+5V
1
(JS
T:B
14B
-PH
DS
S-B
)
VA
RE
F
N.C
MC
DR
S
MC
LUD
2 4 6 8 10 12 14
MC
PW
S
+5V
1
+5V
1
MC
PW
S2
MC
PP
D
MC
PE
D
MC
SP
D
CN
-F
1 3 5 7 9
GN
D2
GN
D2
GN
D2
(JS
T:B
12B
-PH
DS
S-B
)
GN
D2
MC
SS
1
2 6 8 10
MC
SS
3
GN
D2
GN
D2
MC
SS
2
MC
SS
4
4 1211
GN
D2
GN
D1
3N
.C
I3
G1
O2
I3
G1
O2
TR
002
2SB
1240
R00
5
3kJ1
/2W
10K
J1/4
W
R00
6
TR
001
2SD
1768
S
CN
C-1
+5V
1
CN
C-2
VA
RE
F
CN
C-3
+24
V2
CN
C-4
GN
D1
CN
C-5
GN
D2
CN
C-6
MC
PP
D
CN
C-7
MC
DR
S
CN
C-8
MC
PE
D
CN
C-9
MC
LUD
CN
C-1
0M
CP
WS
CN
C-1
2M
CS
S2
CN
C-1
3M
CS
S3
CN
C-1
4M
CS
S4
CN
C-2
4D
CP
R/
CN
C-1
5M
CS
PD
CN
C-1
6M
CS
ET
CN
C-1
7M
CP
CL/
CN
C-1
8M
CF
CL/
CN
C-1
9M
CLU
M/
CN
C-2
0M
CM
-T
CN
C-2
1M
CM
CLK
/
CN
C-2
2M
CM
/
CN
C-1
1M
CS
S1
R00
3
3kJ1
/2W
10K
J1/4
W
R00
1
R00
2
3kJ1
/2W
CN
A-2
MC
LUM
/
CN
D-9
MC
PC
L/
CN
D-7
MC
FC
L/
CN
E-9
MC
PW
S
CN
E-6
VA
RE
F
CN
E-1
3M
CLU
D
CN
E-1
2M
CP
ED
CN
E-1
0M
CP
PD
CN
D-2
GN
D1
CN
D-3
MC
M/
CN
D-4
MC
M-T
CN
F-1
,3,4
,5,6
,7,8
GN
D2
CN
E-1
4M
CS
PD
CN
B-2
DC
PR
/
CN
F-1
2M
CS
S4
CN
F-1
1M
CS
S3
CN
F-1
0M
CS
S2
CN
D-5
MC
MC
LK/
CN
E-1
1M
CD
RS
R00
4
47J1
W
CN
F-9
MC
SS
1
C00
422
3Z/5
0VC
003
47u/
35V
+
C00
222
3Z/5
0VC
001
47u/
35V
+
C00
547
u/35
V+
C00
622
3Z/5
0V
CN
E-1
,2,3
,4,5
+5V
1
CN
D-1
,6,8
CN
B-1
+24
V2
JP00
1
GN
D
D00
1
1SS
133
CN
C-2
3N
.C
CN
E-8
MC
PW
S2
CN
F-2
CN
A-1
VB
(MC
LUM
)
PS
001
RX
E01
0
JP00
2
GN
D
DT
R00
2
DT
C11
4YS
A
DT
R00
1
DT
C11
4YS
A
VD
VB
VB
VB
AA
BB
CC
DD
EE
EE
DD
CC
BB
AA
Not
inst
alle
d in
mas
s pr
oduc
tionNot
inst
alle
d in
mas
s pr
oduc
tion
Not
inst
alle
d in
mas
s pr
oduc
tion
Not
inst
alle
d in
mas
s pr
oduc
tion
Not
inst
alle
d in
mas
s pr
oduc
tion
COPYRIGHT 2001 BY SHARP CORPORATIONAll rights reserved.Printed in Japan.
No part of this publication may be reproduced,stored in a retrieval system, or transmitted,
in any form or by any means,electronic, mechanical, photocopying, recording, or otherwise,
without prior written permission of the publisher.
Trademark acknowledgmentsWindows and Windows NT are trademarks of Microsoft Corporation in the U.S.A.and other countries.IBM and PC/AT are trademarks of International Business Machines Corporation.PCL is a trademark of Hewlett-Packard Company.Pentium is a registered trademark of Intel Corporation.All other trademarks and copyrights are the property of their respective owners.
SHARP CORPORATIONDigital Document System GroupQuality & Reliability Control CenterYamatokoriyama, Nara 639-1186, Japan
N
cCOPYRIGHT 2001 BY SHARP CORPORATIONAll rights reserved.Printed in Japan.
No part of this publication may be reproduced,stored in a retrieval system, or transmitted,
in any form or by any means,electronic, mechanical, photocopying, recording, or otherwise,
without prior written permission of the publisher.
Trademark acknowledgmentsWindows and Windows NT are trademarks of Microsoft Corporation in the U.S.A.and other countries.IBM and PC/AT are trademarks of International Business Machines Corporation.PCL is a trademark of Hewlett-Packard Company.Pentium is a registered trademark of Intel Corporation.All other trademarks and copyrights are the property of their respective owners.
SHARP CORPORATIONDigital Document System GroupQuality & Reliability Control CenterYamatokoriyama, Nara 639-1186, Japan
N
cCOPYRIGHT 2001 BY SHARP CORPORATIONAll rights reserved.Printed in Japan.
No part of this publication may be reproduced,stored in a retrieval system, or transmitted,
in any form or by any means,electronic, mechanical, photocopying, recording, or otherwise,
without prior written permission of the publisher.
Trademark acknowledgmentsWindows and Windows NT are trademarks of Microsoft Corporation in the U.S.A.and other countries.IBM and PC/AT are trademarks of International Business Machines Corporation.PCL is a trademark of Hewlett-Packard Company.Pentium is a registered trademark of Intel Corporation.All other trademarks and copyrights are the property of their respective owners.
SHARP CORPORATIONDigital Document System GroupQuality & Reliability Control CenterYamatokoriyama, Nara 639-1186, Japan
2001 March Printed in Japan N
c