arc frp catalogue

7/31/2019 ARC FRP Catalogue

http://slidepdf.com/reader/full/arc-frp-catalogue 1/10

GRP/FRP Cable Management System

+ Cable trays

+ Cable ladders

+ Trunking & accessories

www.arcinsulations.com

Works:

Village: Ramdevpur, P.O.: Bawali

P.S.: Bishnupur, Dist.: 24 Pgs(S)

West Bengal, India

Tel: +91 33 2495 4231

Fax: +91 33 2495 4233E-mail: [email protected]

Correspondence:

Flat 25B, Tower - A

South City

375, Prince Anwar Shah Road

Kolkata - 700 064

West Bengal, IndiaMobile: +91 9830433678, 9748708809

D e s i g n e d b y : T e c h n o V i s i o n , C a l c u t t a , I n d i a . | g h o s h g r a p h i c s @ g m a i l . c o m



GRP/FRPCable Management

SystemsUncompromised

Insulat ion Qual i ty The growing use of composites as an alternative to traditional materials such as

steel, aluminium, etc, is basically due to the specific characteristics of the

composite, such as:

• The unique resistance to corrosion contributes to reduce the life cycle

costs of the composite installation.

• A specific mechanical strength is higher at lower weight, in comparison to

conventional materials of construction.

• Easy & quick installation.

• High electrical Insulation properties.

Above all durability & resistance to corrosion lead to lower costs during the life

of installation.

The ARCFRP Cable trays are designed & manufactured to provide a stable &

dependable cable support in highly corrosive applications. From power plants

to fertilizer industries, paper mills to refineries & laboratories, sound electrical

design requires an adaptable cable support system that is reliable. The

ARCFRP Cable trays provide a solution for cabling networks that must be

upgraded, reconfigured or relocated, The variety and sophistication of

overhead distribution systems offer greater choice in selecting the right cable

tray for new construction and retrofit applications. Whether concealed in

suspended ceilings or installed in open overhead spaces, cable trays offer a

high degree of flexibility, both in terms of locating the components andaccessing the cabling contained within them. The ARCCable Support Systems

possess unique properties which enable them to resist many corrosive

environments, particularly where conditions indicate that conventional materials

will not provide art economic service life.

Constructed from glass reinforced thermoset Isopthalic resins, ARCCable

Support Systems are designed and manufactured with a structural integrity

normally only associated with steel and aluminum, but without their corrosion,

weight and electrical conduct ivity problems.



• These are manufactured by assembling various cross sections like side runners / 'C' channels

and rungs. According to the loading condition, a suitable 'C' channel is selected.

• The working (allowable) load capacity represents the ability of fibreglass cable ladder to support

the static weight of the cables. It is equivalent to the destruction load capacity, with a minimum

safety factor of 1.5.

• The longitudinal members or side runners are the pultruded 'C' sections, which provide excellent

strength.

• The Cable Ladder width is the distance between two channels which is fitted by rungs / unistruts.

It is the length of the rung / unistruts, between the two channels. The rungs / unistruts are inverted

channels of 40 mm width x 20 mm depth and 4 mm thickness. The rungs are secured to the side

runners / longitudinal members by SS 304 / SS 316 fasteners. The rungs are designed toeliminate rolling over. Our rung / unistruts length range is 150 mm, 200 mm, 300 mm, 400, 450

mm, 500 mm, 600 mm, 750 mm, 900 mm, 1000 mm and 1200 mm.

• The Cable Ladder length is the length of the side runner / 'C' channels. Our range is 3000 mm

length.

• The Cable Ladder rang spacing is the distance between two rungs / unistruts. Our rung spacing

is 300 mm.

• The Cable Ladder height is the height of the side runner / 'C' channel. Our range is 100 mm and

150 mm.

• The Cable Ladder tray thickness is the thickness of the side runner / 'C' channel. Depending

upon the load condition the thickness is selected. Our range is 4 mm, 5mm and 6 mm.

• The fittings are used whenever cable needs to be bent at variable angles (90°, 60°) by using

variety of fitt ings. The fitt ings are mitered at 305 mm radius. Whenever the width of the cable

ladder needs to be changed, reducers are used. To run the cable three ways, 'T' fittings are used

and likewise to run a cable four ways 'Cross' fittings are used.

H - Height T - Thickness W - Width

(mm) (mm) (mm)

100 4 30

100 6 30

150 4 40

150 6 40

Model Nos. Width - W (mm) Height (mm) ARC-LT6 150 100/150

ARC-LT8 200 100/ 150

ARC-LT12 300 100/150

ARC-LT16 400 100/150

ARC-LT18 450 100/150

ARC-LT20 500 100/150

ARC-LT24 600 100/150

ARC-LT30 750 100/150

ARC-LT36 900 100/150

ARC-LT40 1000 100/150

ARC-LT48 1200 100/150

Specif icat ions

Cable Ladders

HT

W

3000

(STANDARD LENGTH)

RUNG

SIDE

MEMBER

300

(TYP)

150

COUPLER PLATE

1 0 0 / 1 5

0

W

4 / 6

SIDE MEMBER RUNG

GRP/FRP Cable Management Systems



W (mm) L (mm) A (mm)152 1207 854

229 1314 930

305 1422 1006

457 1638 1159

610 1854 1311

762 2070 1464

914 2286 1616

Mitered Fit t ings for the Cable Ladders

W

L

A

R R

90° Horizontal Radius Bend

W (mm) A (mm)

152 330

229 406

305 483

457 635

610 787

762 940

914 1092

90° Horizontal Direct Bend

A

A

W

W

A

R

L

R A

W

L

W (mm) A (mm) L (mm)

100 530 749

150 530 749

200 530 749


100 505 714

150 555 786

200 606 857

90° Inside Vertical Radius Bend

90° Outside Vertical Radius Bend

Straight Reducer

W (mm) A (mm) L (mm)152 780 1410

229 850 1410

305 930 1410

457 1080 1640

610 1240 1880

762 1390 1880

914 1540 2110

Horizontal Radius Tee


152 780 1410

229 850 1410

305 930 1410

457 1080 1640

610 1240 1880

762 1390 1880

914 1540 2110

Horizontal Radius Cross

W1

W2

L

W1

W2

L

W1 (mm)

914 762 610 457 305 229

152 1105 1029 953 876 679 670

229 1067 991 914 838 670 - 305 1029 953 914 679 - -

457 953 908 679 - - -

610 908 679 - - -

762 679 - - - - -

L (mm)

W 2 ( m m )

Right or Left Hand Reducer

W1 (mm)

914 762 610 457 305 229 152 1410 1175 1175 940 940 705

229 1175 1175 940 940 705 -

305 1175 940 940 705 - -

457 940 940 705 - - -

610 940 705 - - -

762 705 - - - - -

L (mm)

W 2 ( m m )


W1

W 2

L

A

R

R

A W1W2

(A)

L

RR



The perforated type, solid bottom, pre-drilled cable t ray are designed for light loads i.e. instrumentat ion

and control cables and for die transition from cable trays to individual control points.

• Load design is for a support span of 2.5 mtrs. Standard

tray length is 3.0 mtrs.

• Maximum deflection range 12.7 - 25.4 mm.

• Load bearing UDL for other models are available on

request.

Specif icat ionsPerfor ated Type Cabl e Trays

FRP Cable Tray covers

• Most economical installation with Thermo- plastic Drive Rivets

• Cover Hold Down Clamps allow cover to be removed for easy access to cables

• Available in ventilated & non-ventilated type.

Two nos. of Coupler / Splice Plates are required for each 3 mf rs. length of Cable Tray to be clamped

with nuts & bolts on two ends for connect ing it to another length of cable tray.

• Eliminates the Need to Drill or Punch Holes While Allowing

for Normal Expansion

• This Guide becomes a clamp with use of a 316 SS set

screw on top.

• Set SCREW is included with part.

• Guide is also easily adaptable for right or left sided

installations.

Peaked Caver Flat Cover

FRP Splice / Connector Plate

Cable Tray Hold Down Clamp

Perforated Load

Cable Tray bearing

Model No. UDL(Kg/mtr)

ARC -PT2A 11

ARC -PT2B 15

ARC -PT2C 18

ARC -PT2D 25

ARC -PT2E 30

Perforated Tray Runner Thickness

Cable Tray height - H width - W - T

Model No. (mm) (mm) (mm)

ARC -PT2A 50 50 3.0

ARC -PT2B 50 100 3.0

ARC -PT2C 50 150 3.0

ARC -PT2D 50 200 3.0

ARC -PT2E 50 300 3.0

ARC -PT3A 80 100 3.0

ARC -PT3B 80 150 3.0ARC -PT3C 80 200 3.0

ARC -PT3D 80 250 3.0

ARC -PT3E 80 300 3.0

ARC -PT3F 80 400 4.0

ARC -PT3G 80 500 4.0

ARC -PT3H 80 600 4.0

ARC -PT4A 110 100 4.0

ARC -PT4B 110 200 4.0

ARC -PT4C 110 300 4.0

ARC -PT4D 110 400 4.0ARC -PT4E 110 500 4.0

ARC -PT4A 110 600 4.0

H

T

W




W (mm) A (mm)

50 565

75 565

100 565

150 565

200 565

250 568

90° Vertical Inside Bend

W (mm) A (mm)

50 559

75 559

100 559

150 559

200 559

250 559

90° Vertical Outside Bend

W1 (mm) W2 (mm)

51 51

76 76

102 102

152 152

203 203

255 255

Horizontal Cross

Cable TrayHold Down Clamp

Cable Tray FRP CoverHold Down Clip

W (mm) A (mm)

50 610

75 635

100 660

150 711

200 762250 813

90° Horizontal Bend

W1 (mm) W2 (mm)

51 51

76 76

102 102

152 152

203 203255 255

Horizontal Tee

A

W

R

22°-30°

22°-30°

45º

10’’

Mitered Fi t t ings for the Perforated Cable Tray

22°-30°

22°-30°

10”

AR

W

45°

10’’

A

R

W

22º-30º

22º-30º

45º

W 1

18’’ (+57)

1 8 ’ ’ ( + 5 7 )

W2

18’’ (+57)

1 8 ’ ’ ( + 5 7 )

W 1

W2

(8)

(13)

A

(38)

1 / 2’’

11 / 2’’

5 / 16’’

2’’ (51)1 / 4’’ Bolt

3 / 16’’ (5)

This catalogue is issued to p rovide outline information only and is not deemed to form part of an offer or contract. With the policy of continuous development,

ARCproTM reserves the right to change details without prior notice.


arc frp catalogue

Documents